bb6100 boring machine 1 bb61 2013 - rectiequipos
Post on 06-May-2022
1 Views
Preview:
TRANSCRIPT
BB6100 Boring Machine
Packing big boring capability into a compact, modular machine, maximizing efficiency and minimizing downtime.
Powerful Yet Compact• Take the power of a stationary machine to the
job site to solve tough machining challenges in record time.
• Using the 11.3 in3 (185.3 cm3) Hydraulic motor,itproduces1435ft•lb(1945.6N•m)oftorque at the bar, at 33 rpm.
• Compact, modular components allow fast, easysetup,maximizingefficiencies,andminimizing downtime.
Versatile and Flexible• Huge machining range bores from 8.8 - 38.0
inches(223.5-965.2mm)indiameter,andfacesfrom7.5-42.1inches(190.5-1069.3mm) with various facing attachments.
• ID and End Mount Bearings feature spherical taper-lock roller bearings for easy setup and removal of the bar, and allow for up to 1.5 degrees of misalignment when setting up bearings.
• Endmountbearingscanbefineadjustedby+/-0.625inches(15.9mm)tocenterthebar.
• Optional dual action boring/facing arms increase facing range, and allow for both boring and facing without switching equipment. Full-length square ways on boring/facing arms allow for quick positioning anywhere along thearm.Attachestothenetfittoolcarrierbycompression-clamping, to provide maximum tool stability.
• Netfittoolcarriercanbeclampedtobarforfacing operations. For boring operations, carrier can be adjusted to remove clearance betweencarrierandthebar.Thisflexibilityalso ensures maximum rigidity for either operation.
• For even greater facing range and longer continuous stroke, the new boring/facing arms
are available. Setup is quick & easy for both boring and facing operations.
• Netfittoolcarrierisdesignedwithasplitframeto simplify installation on the boring bar. It can beconfiguredtouseeithertheboringheadset for boring, the mechanical facing head for facing, or the new boring/facing arm assembly for both boring and facing operations.
• With leading & trailing boring head configuration,2boringheadscanbeusedsimultaneously.
• Highly versatile tool holder block accepts industry standard tooling with a nominal ¾ inch(19.1mm)squareshank.
• Tool post on the boring/facing arm can be rotatedtoprovidemaximumflexibilityinmachining setup (including some cantilevered configurations).
High Quality Design• Features a uniquely-designed modular tool
carrier which provides a new level of strength and rigidity by channeling machining forces directly to the boring bar through strategically-located adjustable guide shoes.
• Durable chromed bars, straight to within 0.001 inch per foot (0.0254 per 304.8 mm) ensure accurate machining.
• Adjustable, removable half nut increases net fittoolcarrierflexibility.Easyremovaloftoolcarrier allows for machining of multiple bores.
• Backlashadjustmentnutallowsin-the-fieldadjustment to eliminate backlash in the tool carrier, and extend the life of the machine.
2013BB61 1
US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.comWorldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
page 2
SPecificationS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring and Facing Ranges: Boringdiameterrange,standardstackblockassembly: 8.8-38.0inches 223.5-965.2mm
Boring diameter range, boring/facing arm assembly: with18inch(457.2mm)boring/facingarm 19.9-32.1inches 505.5-815.3mm with23inch(584.2mm)boring/facingarm 24.8-42.1inches 629.9-1069.3mm
Recommended facing diameter range, using mechanical facing head assy: 10.6-38.0inches 269.2-965.2mm
Facing diameter range, boring/facing arm assembly: with 18 inch (457.2 mm) boring/facing arm 17.5 - 32.1 inches 444.5 - 815.3 mm with23inch(584.2mm)boring/facingarm 17.5-42.1inches 444.5-1069.3mm
Facing diameter range, boring/facing arm assembly, tool post reversed: (“tool post reversed” refers to rotating the tool post so that the tool is on the bar side of the tool post.) with18inch(457.2mm)boring/facingarm 7.5-20.1inches 190.5-510.5mm with23inch(584.2mm)boring/facingarm 7.5-30.1inches 190.5-765.5mm
Performance Data RotationalDriveUnit(RDU)gearratio: 6:1gearreduction 6:1gearreduction Hydraulic motor size affects torque and speed Theoreticalvaluescalculatedusinga10Hphydraulicpowerunitproducing2000psi(13790kPa)continuous, [normaloperationis1200psi(8270kPa)]andpumping10gpm(37.9l/min).
Hydraulicmotorsizerange: 3.6-17.9in3 59.9-293.3cm3 BoringBarTorque: 470-1820ft•lb 637.2-2467.6N•m Max boring rpm: 107 - 21 rpm 107 - 21 rpm
For example, with 11.3 in3 (185.3 cm3) hydraulic motor (43457): BoringBarTorque: 1435ft•lb 1945.6N•m Max boring rpm: 33 rpm 33 rpm
Feed Rate of mechanical Axial Feed Unit (AFU): 0.003 - 0.020 inches/rev 0.076-0.508mm/rev
FeedRateofelectricAxialFeedUnit(AFU): 0-0.3inches/min 0-7.62mm/min
Measures Shipping Weights (estimated): Machine includes Rotational Drive Unit (RDU), Axial Feed Unit (AFU), boring head set, tool carrier, tool kit, and hydraulic motor. formachine(woodcrate) 640lbs 290.3kg for machine (metal crate) 740 lbs 335.7 kg forone4armbearingassembly 160lbs 72.6kg forone3armbearingassembly 80lbs 36.3kg for boring bar 2.5 lbs/inch 0.04 kg/mm for10HpHydraulicPowerUnit 500lbs 226.8kg
Shipping dimensions: Machine,inwoodcrate,W,D,H 18.5x34x24inches 469.9x863.6x609.6mm Machine, in steel crate, W, D, H 43.3x29.5x22.5inches 1099.8x749.3x571.5mm Bearing(eachbearingshippedseparately)W,D,H 32x32x11inches 812.8x812.8x279.4mm 12foot(3657.6mm)barW,D,H 11x13x154inches 279.4x330.2x3911.6mm 10HpHydraulicPowerUnitW,D,H 27x33x48inches 685.8x838.2x1219.2mm
tool configurationS
Climax Portable Machining & Welding Systems Web site: climaxportable.comWorldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
page 3
ConfigureyourBB6100ineighteasysteps.
ToconfigureyourBB6100BoringMachine:1 Select a Base Unit2 Select an Axial Feed Assembly3 Select Bearing Assemblies4 Select a Boring Bar5 Select a Boring Head Set6SelectaHydraulicMotor7 Select a Facing Assembly8 Select a Shipping Container
Toconfiguretheboringmachineyourequire,simplyselecttheoptionyouneedineach step, then contact your Climax representative.
1 Base Unit Rotationaldriveunit,netfittoolcarrierassembly, 54398 tool kit, and instruction manual.2 Axial Feed Assembly Mechanical axial feed assembly 23299 Electrical axial feed with mechanical rapid return, 120V 43735 Electrical axial feed with mechanical rapid return, 230V 41071
3 Bearing Assemblies Spider assembly 3 arm end bearing support 53840 Mounting range: 12 - 20 inches (304.8 - 508.0 mm) Spider assembly 4 arm end bearing support 53710 Mountingrange:18-38inches(457.2-965.2mm) ID Bearing mount assembly, for ID diameters 54355 of11.25-47inches(285.8-1193.8mm) * Multiple units may be ordered. 4BoringBar(3.5inch(88.9mm)dia,) Boringbarassembly,4feet(121.9cm) 25221 Boring bar assembly, 5 feet (152.4 cm) 22107 Boringbarassembly,6feet(182.9cm) 22108 Boring bar assembly, 7 feet (213.4 cm) 22109 Boring bar assembly, 8 feet (243.8 cm) 22110 Boringbarassembly,9feet(274.3cm) 22111 Boring bar assembly, 10 feet (304.8 cm) 22112 Boring bar assembly, 11 feet (335.28 cm) 22113 Boringbarassembly,12feet(365.76cm) 22114 Boringbarassembly,13feet(396.24cm) 22777 Boringbarassembly,14feet(426.72cm) 22770 Boringbarassembly,16feet(487.68cm) 22789 Boringbarassembly,17feet(518.16cm) 30248 Boringbarassembly,20feet(609.6cm) 36485 * Multiple units may be ordered.
5 Boring Head Sets Boringheadset,8.8-26inches(223.5- 54342 660.4mm)tenthsetwithsquaretoolingslot Boring head set, 8.8 - 38 inches (223.5 - 54343 965.2mm)tenthsetwithsquaretoolingslot Boringheadset,8.8-26inches(223.5- 54344 660.4mm)tenthsetwithsquaretoolingslot, leading and trailing Boring head set, 8.8 - 38 inches (223.5 - 54345 965.2mm)tenthsetwithsquaretoolingslot, leading and trailing Boringheadset,11.5-26inches(292.1- 54346 660.4mm)solidtooling,leadingandtrailing Boringheadset,11.5-38inches(292.1- 54347 965.2mm)solidtooling,leadingandtrailing
6 Hydraulic Motor Assembly Hydraulicmotorassembly,3.6CIR(59cm3/rev) 43438 85.5barrpm@10gpm(37.9l/min)** Hydraulicmotorassembly,5.9CIR(97cm3/rev) 43439 52barrpm@10gpm(37.9l/min)** Hydraulic motor assembly, 7.3 CIR (120 cm3/rev) 43440 42barrpm@10gpm(37.9l/min)** Hydraulicmotorassembly,8.9CIR(146cm3/rev) 43441 34barrpm@10gpm(37.9l/min)** Hydraulic motor assembly, 11.3 CIR (185 cm3/rev) 43442 27barrpm@10gpm(37.9l/min)** Hydraulic motor assembly, 14.1 CIR (231 cm3/rev) 43443 22barrpm@10gpm(37.9l/min)** Hydraulicmotorassembly,17.9CIR(293cm3/rev) 43444 17barrpm@10gpm(37.9l/min)** * Multiple units may be ordered. ** Theoretical, calculated values shown7 Boring/Facing Assemblies Mechanicalfacingheadassy,4inch(101.6mm) 22680 Mechanicalfacingheadassy,6inch(152.4mm) 49753 Mechanical facing head assy, 8 inch (203.2 mm) 49754 Boring/facing arm assembly, 18 inch (457.2 mm) 54385 Boring/facing arm assembly, 23 inch (584.2 mm) 54386 * Additional arms may be purchased separately.8 Shipping Container Plywood hinged crate, 24 x 37 x 20-5/8 28560 (610x940x524mm) Metal shipping container 43 x 30 x 23* 54352 (1092x762x584mm) * Machine components only. Bars and bearings available in wood only.
Axial Feed Unit
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 Cover
FurtherCustomizeyourBB6100withtheseoptions (order separately):Small Bore Kit 55198 for6-10inch(152.4-254mm)diametersRotational Drive Unit 22221NetFitToolCarrier 54224Tool Kit 54262
Climax Portable Machining & Welding Systems Web site: climaxportable.comWorldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
page 4
OperatiOnal DimensiOnsDimensions in Inch (mm)
Spider Assembly 4-Arm End Bearing Support
Spider Assembly 3-Arm End Bearing Support
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
53710SPIDER ASSY END BRG SUPPORT 38" BB6100
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
53710SPIDER ASSY END BRG SUPPORT 38" BB6100
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
53840SPIDER ASSY END 3 ARM BRG SUPPORT 20" BB6100
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
53840SPIDER ASSY END 3 ARM BRG SUPPORT 20" BB6100
Climax Portable Machining & Welding Systems Web site: climaxportable.comWorldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
page 5
OperatiOnal DimensiOnsDimensions in Inch (mm)
ID Bearing Mount Assembly ForIDdiametersof11.25-47inches(285.8-1193.8mm)
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
54355MOUNT ID BEARING ASSY 11.25-47 INCH BB6100
Electrical Axial Feed Assembly
Mechanical Axial Feed Assembly
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
23299
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
23299
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
23299
Climax Portable Machining & Welding Systems Web site: climaxportable.comWorldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
page 6
OperatiOnal DimensiOnsDimensions in Inch (mm)
Boring/facingarmconfigurations
Rotational Drive Unit
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 RDU AND HYDRAULIC MOTOR
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 23in arm facing minimum swing
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 23in arm facing minimum swing
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 23in arm facing minimum swing
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 23in arm facing minimum swing
Climax Portable Machining & Welding Systems Web site: climaxportable.comWorldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
page 7
OperatiOnal DimensiOns
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 bar length requirement
DeterminingtheProperBarLengthforyourBB6100
Mechanical Facing Assembly
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
22680HEAD FACING ASSY MECHANICAL FEED BB6000
Dimensions in Inch (mm)
Portable Machine Tools, Inc. ©Newberg, OR USA 97132 WWW.CPMT.COM inside U.S. 1-800-333-8311
BB6100 bar length requirement
World Headquarters
Production FacilitiesRental LocationsInternational Distributors
Portland
European HeadquartersCologne
Manchester
Perth
Singapore
Charlotte
Edmonton
Houston
Monterrey
Cincinnati
Baton Rouge
Manchester
Gdansk
Regional Sales & Technical Support Offices
call climax for:
World headquarters2712 E. Second StreetNewberg,Oregon97132USAWorldwide Telephone: 1.503.538.2185N.AmericaToll-Free:1.800.333.8311Fax:1.503.538.7600Email: info@cpmt.com
european headquartersAm Langen Graben 852353 Düren, GermanyTelephone:(+49)(0)2421.9177.0Fax:(+49)(0)2421.9177.29Email: info@cpmt.de
Connect with us:
cliMax gloBal locationS
Copyright © 2013 Climax Portable Machining & Welding Systems. All Rights Reserved. Climax has taken reasonable measures to ensure the accuracy of the information contained in this document. However, Climax makes no warranties or representations with respect to the information contained herein; and Climax shall not be held liable for damages resulting from any errors or omissions herein, or from the use of the information contained in this document.
on-site trainingNeedsomerefreshercoursesinsettingupand operating your Climax machine tool?
Special ProjectsClimax has been solving complicated on-site machining and welding problems for ourcustomerssince1964.
rentalsWith 14 worldwide rental depot locations, you are never far away from a Climax portable machine tool.
top related