(bizhubpress c8000)icp list ver.1.1(en) g

bizhub PRESS C8000 (A1RF) ICP LIST Konica Minolta Confidential

July 22, 2013

Board name S/N FuseNo

Supplyvoltage onOverallwiringdiagram

Supplyvoltage onBoardcircuitdiagram

Where to supply Trouble code and Symptom to be appear

ICP1 12V1 12V2 System cooling fans/Up, Lw, Rr (FM33,34,35)C-5302 (System cooling fan, Up/Lw error), C-5303 (Systemcooling fan/ Rr error)

ICP2 12V1 12V2 HD-514 (HD unit) cooling fans/1, /2 (FM46, 47) C-5304 (HDD unit cooling fan abnorma）

ICP4 5V1 5V1Operation board/1 (only LED drive) (OB1) viaOperation board/4 (OB4)

LED light on the operation panel does not light.

ICP6 --- 5V1 Vending machine (integrated I/F), Poly SW Connected device does not work.

ICP7 5V1 5V1 Control board/R (RFID)C-0201 (Communication error between main body - RFIDcontrol board)

Printer image processingboard

(PRIPB)A1RFH030 ICP3000 5V1 5V Toner supply open/close sensor (PS46) Error Message "Set toner supply unit properly."

ICP1 24V2 24V2 ADU Locｋ solenoid (SD1) Even while clearing JAM, ADU unit lock is not released

ICP2 24V2 24V1ADU ventilation fans/1/2 (FM31, 32)Toner collection cooling fan (FM30)Tucking fans /1/2 /3 (FM27, 28, 29)

C-0302 (Tucking fan error)C-0308 (ADU ventilation fan/Toner collection cooling fan error)

ICP3 12V2 12V IDC sensors C-2841 (γ sensor base line error)ICP4 12V2 12V 12V source supply C-5001（12V abnormality)

ICP6 24V2 24V2 Vertical conveyance CL/1/2 (CL20,21)Around A3 size paper can be fed from all trays without jamAfter loading A4 size paper:

Tray 1: no jam, Tray 2: J-1705, Tray 3: J-1703 occurs

ICP7 24V2 24V2Trays1, 2 paper feed clutches/1/2 (CL1, 3)Trays1, 2 pre-registration clutches/1/2 (CL2, 4)Trays1, 2 pick up solenoids 1/2 (SD4, 5)

J-1101 (When Tray 1 is the source) .After clearing JAM, ”Set paper to Tray 1" is indicated.J-1201 (When Tray 2 is the source)After clearing JAM, "Set paper to Tray 2" is indicated

ICP8 24V2 24V2Tray3 paper feed clutch/3 (CL5)Tray3 pre-registration clutch/3 (CL6)Tray3 pick up solenoid/3 (SD6)

J-1301 (When tray 3 is the source)After clearing JAM, "Set paper to Tray 3" is indicated.

ICP9 24V2 24V2 Tray lift up motors/1/2/3 (M36, 37, 38) C-0201 to 0203 (Tray lift up motor abnormality)ICP10 24V2 24V1 Toner suction fan /2 (FM6) C-2305 (toner suction fan/2 abnormality)ICP11 24V2 24V1 paper exit cooling fan/1/2/3 (FM 24, 25, 26) C-0304 (paper exit fan abnormality)

ICP12 24V2 24V1

Intermediate transfer belt cleaning cooling fans/1/2/3 (FM19, FM20, FM21)Dew condensation prevention fan (FM18)Fusing thermal insulation fans/Fr/Rr (FM22, 23)

C-3304 (fusing thermal insulation fan abnormality)C-3305 (fusing dew condensation prevention fan abnormality)C-2303 (Intermediate transfer cleaning fan abnormality)

ICP13 24V2 24V4 Total counters/1/2 (CTN1, 2) Total counter does not incrementICP14 24V2 24V4 key counter (CTN3) Key counter does not increment.ICP15 12V2 12V TCR sensor power supply C-2411 to 2414 (TCR sensors/Y to /K abnormality)

ICP16 24V2 24V4Erase Lamp power supplySurface potential power supply

C-2401 to 2404 (Erase lamp/Y to /K abnormality)

ICP17 24V2 24V4Color registration shutter SD (SD8, 9)Belt separation claw SD (SD7)

Separation claw does not work (belt wrapping JAM)C-45**, C-46** etc (color registration related error)C-2841 (γ sensor base line error)

ICP18 24V2 24V2 Tray 1 lift up motor (M36) C-0201 (Tray 1 lift up motor abnormality)ICP19 24V2 24V2 Tray 2 lift up motor (M37) C-0202 (Tray 2 lift up motor abnormality)ICP21 24V2 24V4 Intermediate transfer steering motor (M33) C-2234 (Intermediate transfer steering initial operation error

ICP22 24V2 24V1deodorization fans/1/2 (FM11, 12)Writing ventilation fans/1/2/3/4 (FM13,14,15,16)

C-0301 (deodorization fans abnormality)C-4302 (writing ventilation fans abnormality)

ICP23 5V4 5V 5V source C-C101(printer control initial communication errorICP24 24V2 24V2 Tray 3 lift up motor /3 (M38) C-0203 (Tray 3 lift up motor abnormality)ICP25 24V2 24V1 toner suction fan/1 (FM17) C-2304 (toner suction fan/1 abnormality)ICP27 24V2 24V2 24V2 source supply C-5002(24Ｖ abnormality)

ICP28 24V2 24V4 Toner bottle clutches/Y/M/C/K (CL16, 17, 18, 19)toner bottle does not rotate. Toner is not suppliedThough toner bottle is not empty, "Add toner" indication

ICP29 24V2 24V4 Tilt correction motors/Y/K (M25, 28)

C-4501 (Tilt correction motor (Y) abnormality )C-4511 (Tilt correction motor (Y) time out abnormality)C-4504 (Tilt correction motor (K) drive abnormality)C-4514 (Tilt correction motor (K) time out abnormality)C-45**, C-46** etc (color registration related abnormality)

ICP30 24V2 24V4 Tilt correction motors/M/C (M26, 27)

C-4502 (Tilt correction motor (M) abnormality)C-4512 (Tilt correction motor (M) time out abnormality)C-4503 (Tilt correction motor (C) abnormality)C-4513 (Tilt correction motor (C) abnormality)C-45**, C-46** etc (color registration related abnormality

ICP31 24V2 24V4 24V4 Source C-5002 (24V abnormality）ICP32 24V2 24V1 24V3 Source C-5002 (24Ｖ abnormality）ICP33 24V2 24V1 Pat Light Pat light does not put on

ICP34 24V2 24V4Partial CD magnification correction motors/M/C(M30, 31)

C-4532 (Partial CD magnification motor (M) abnormality)C-4542 (Partial CD magnification motor (M) time outabnormality)C-4533 (Partial CD magnification motor (C) time outabnormality)C-4543 (Partial CD magnification motor (C) time outabnormality)C-45**, C-46** etc (color registration related abnormality)

Control Board/S

[Overall Control board(OACB)]

A1RFH010

Printer control board(PRCB)

A1RFH050

Konica Minolta Confidential

1/6

bizhub PRESS C8000 (A1RF) ICP LIST Konica Minolta Confidential

July 22, 2013

Board name S/N FuseNo

Supplyvoltage onOverallwiringdiagram

Supplyvoltage onBoardcircuitdiagram

Where to supply Trouble code and Symptom to be appear

ICP35 24V2 24V4Partial CD magnification correction motors/Y/K(M29, 32)

C-4531 (Partial CD magnification motor (Y) abnormality)C-4541 (Partial CD magnification motor (Y) time outabnormality)C-4534 (Partial CD magnification motor (K) abnormality)C-4544 (Partial CD magnification motor (K) time outabnormality)C-45**, C-46** etc (color registration related abnormality)

ICP36 24V2 24V4 1ｓｔ transfer pressure release motors (M11)C-2221 (1st transfer pressure release abnormality)C-2232 (1st transfer pressure release abnormality)

ICP38 24V2 24V1 Motor cooling fans/1/2 C-2302 (Motor cooling fan abnormality)

ICP39 24V2 24V4 Main relaywarming up does not complete. (Fusing lamp does not puon)

ICP1 24V3 24V/1 Loop motor /Rr (M45) J-1701 The 1st side of paper does not reach to registration PS

ICP2 24V3 24V/1 Registration motor (M58)J-3101 The paper does not reach to the leading edge timingsensor at registration section.

ICP3 24V3 24V/1 Loop motor/Fr (M44)J-1701 The 1st side of paper doses not reach to theregistration sensor.

ICP4 24V3 24V/1 ADU loop motor (M57)J-9301 The paper does not reach to the ADU conveyancePS.

ICP5 24V5 24V/3Conveyance drive board 24V/3 Error detectioncircuit

C-5004 (Conveyance board 24V/3 abnormality)

ICP6 24V3 24V/12nd transfer steering motor (M46)De-curler pressure adj. motor (M47)

C-2224 (2nd transfer steering abnormalityDe-curler pressure release abnormality)

ICP7 24V3 24V/1 Conveyance drive board24V/1 error detection C-5003 (Conveyance board 24V/1/2 abnormality)ICP8 24V3 24V/1 Intermediate conveyance clutches /1/2 (CL14 J-1705 Does not reach to intermediate conveyance PS/2

ICP9 24V3 24V/2

Fusing belt/Lw steering motor (M54)Fusing refreshing roller pressure release motor(M55)Fusing external heating belt pressure releasemotor (M53)

C-3101 (Fusing belt/Lw steering abnormality)C-3109 (Fusing refreshing roller drive motor abnormality)C-3105 (Fusing external heating belt pressure releaseabnormality)

ICP10 24V3 24V/2 WEB motor (M52) C-3111 (Fusing WEB drive circuit power supply abnormality

ICP11 24V5 24V/3 Fusing belt/Lw cooing fans DC/DC 24V inputC-3302 or C-3303(Fusing belt/Lw cooling fan Fr/Md/Rr abnormality) Fusing belt/Lw cooling fans/Fr/Md/Rr abnormality)

ICP12 24V3 24V/2ADU cooling fans/2/3/4 (FM37, 38, 39)Pre-fusing suction fans/Fr/Md/Rr (FM40, 41, 42)

C-0305 (ADU cooling fan/2 abnormality)C-0309（ADU cooling fan/3 abnormality)C-3306 (pre-fusing suction fans abnormality)

ICP13 24V3 24V/2 ADU cooling fan/1 (FM36), ADU solenoid (SD2)J-9301 Does not reach to ADU conveyance PS(Occurs on A3. A4 was fed without problem)C-0303 ADU cooling fan error

ICP14 24V3 24V/2 Conveyance drive board 24V/2 error detection C-5003 (Conveyance board 24V/1/2 abnormality)ICP16 5V4 5V 5V source supply C-5106 Initial communication with Fusing unit failedICP17 12V2 12V 12V source supply C-5005 (Conveyance board 12V abnormality)

ICP18 24V3 24V2 Centering error detectionMain scan direction registration miss alignment between 1sand 2nd sides

ICP19 24V3 24V/2 ADU reverse motor (M56) C-0108 (ADU reverse motor abnormality)ICP20 24V3 24V/2 2nd transfer pressure release motor (M41) C-3103 (2nd transfer pressure release abnormality)ICP21 24V3 24V/2 De-curler motor (M47) C-0106 (De-curler motor abnormality)ICP22 24V3 24V/2 Reverse motor (M43) C-0107 (Reverse motor abnormality)ICP23 24V3 24V/2 Fusing belt/Lw pressure release motor (M49) C-3102 (Fusing pressure release abnormality)

ICP25 24V3 24V/2ADU conveyance clutches/1 to /7, (CL 7 to 13),paper exit gate solenoid (SD3)

J-9201 Does not reach to ADU reverse PS(Paper exit gate solenoid is not turned ON and paper enters tothe paper exit gate. Then the code appears.

ICP26 24V5 12V Fusing belt cooling fans/Fr/Rr (FM43, 45) C-3303 (fusing belt cooling fan/Fr or Rr abnormalityICP28 24V5 12V Fusing belt cooling fan/Mid (FM44) C-3302 (fusing belt cooing fan/mid abnormalityICP1 24V2 24V Toner supply motors Y/M (M16, 17) C-2229 (Toner supply motors Y/M 24V abnormalityICP2 24V2 24V Toner supply motors C/K （M18, 19) C-2230 (Toner supply motors C/K 24V abnormality)

ICP3 24V2 24V Developing charge fans/1/2/3/4 (FM7, 8, 9 10) C-2306 (Charging fan/1 abnormality)

ICP4 5V4 5V 5V source supplyNo error code during printing. When turning OFF-ON theswitch, C-5105 (Initial communication abnormality) occurs

AC drive board/1(ACDB/1)

A1RFH510 ICP1 5V4 5V AC drive board/1C-3903 or C-3906 or C-3911 or C-3916 or C-3919 orC-3801 to 3805 or Does not warm-up.

AC drive board/2(ACDB/2)

A1RFH520 ICP1 5V4 5V AC drive board/2C-3903 or C-3906 or C-3911 or C-3916 or C-3919 orC-3801 to 3805 or Does not warm-up

ICP1 5V2 5V3 Operation board/1 Power supplyOperation panel does not work. (Input to numeric key andtouch panel is not recognized.)

ICP3 12V1 12V1Power supply for the inverter for LCD backlighof operation panel.

LCD backlight of operation panel does not go on.

Operation board /4(OB4)

A1RFH780

Conveyance drive board(CDB)

A1RFH060

Toner drive board(TDB)

A1RFH070

Konica Minolta Confidential

2/6

PF-705, PF706 (A1RG&A1RH) ICP LIST Konica Minolta Confidential

July 22, 2013

Board name S/N FuseNo

Supplyvoltage onOverallwiringdiagram

Supplyvoltage onBoardcircuitdiagram

Where to supply Trouble code and Symptom to be appear

ICP1 24V3 24V3 Loop motor/1 (M5) Loop motor/1 does not work. Jam occurs.ICP2 24V2 24V2 Loop motor/2 (M6) Loop motor/2 does not work. Jam occurs.

ICP3 24V2 24V1 Paper leading edge detection sensor (PS40)Paper leading edge detection sensor does not turn ON.Image centering error occurs.

ICP4 24V2 24V1Tray lock solenoid/1 (SD1)Tray lock solenoid/2 (SD2)Tray lock solenoid/3 (SD3)

No error code occurs.However, tray cannot be opened. (Tray lock is not released.)

ICP10 24V2 24V1 Cooling fans/1/2 (FM7, 8) C-0310 (1st PF), C-0323 (2nd PF from main body)

ICP11 24V2 24V1Dehumidifier fans/Rt1/Lt1 (FM21, 22)Dehumidifier fans/Rt2/Lt2 (FM23, 24)

C-0320, C-0321 (1st PF)C-0333, C-0334 (2nd PF)

ICP12 24V2 24V1 Dehumidifier fan/Rt3/Lt3 (FM25, 26)C-0322 (1st PF)C-0335 (2nd PF)

ICP14 24V2 24V1 Paper suction fans/1/2 (FM1, 2)C-0317 (1st PF)C-0330 (2nd PF)

ICP15 24V2 24V1Paper leading edge separation fans/Fr1/Rr1(FM9/10)Paper feed assist fans/Fr1/Rr1 (FM11/12)

C-0311, C-0314 (1st PF)C-0324, C-0327(2nd PF)

ICP16 24V2 24V1 Paper suction fans/3/4 (FM3,4)C-0318 (1st PF)C-0331 (2nd PF)

ICP17 24V2 24V1 Paper suction fans/1/2 (FM5,6)C-0319 (1st PF)C-0332 (2nd PF)

ICP18 24V2 24V1Paper leading edge separation fans/Fr2/Rr2(FM13, 14)Paper feed assist fans/Fr2/Rr2 (FM15, 16)

C-0312, C-0315 (1st PF)C-0325, C-0328 (2nd PF)

ICP19 24V2 24V1Paper leading edge separation fans/Fr3/Rr3(FM17,18)Paper feed assist fans/Fr3/Rr3(FM19, 20)

C-0313, C-0316 (1st PF)C-0326, C-0329 (2nd PF)

ICP20 24V2 24V2Exit clutches/1/2 (CL1. 2)Vertical conveyance clutches/1/2/3/4 (CL3, 4, 5,6)

Jam occurs at vertical conveyance section

ICP21 24V2 24V2

Horizontal conveyance clutches/1/2 (CL8, 9)Pre-registration clutch (CL7)Tandem conveyance clutes//1/2/3/4/5 (CL10, 11,12, 13, 14)

Jam occurs at horizontal conveyance or tandem conveyance3section

ICP23 24V2 24V2

Suction belt clutc/1 (CL15)Paper leading edge shutter solenoid/1 (SD4)Shutter solenoid/Fr1 (SD5)Shutter solenoid/Rr1 (SD6)Floating duct solenoid/Fr1 (SD7)Floating duct solenoif/Rr1 (SD8)

Suction failure occurs at upper tray and jam occurs.

ICP24 24V2 24V2

Suction belt clutch/2 (CL16)Paper leading edge shutter solenoid/2 (SD9)Shutter solenoid /Fr2 (SD10)Shutter solenoid/Rr2 (SD11)Floating duct solenoid/Fr2 (SD12)Floating duct solenoid/Rr2 (SD13)

Suction failure occurs at middle tray and jam occurs.

ICP25 24V2 24V2

Suction belt clutch/3 (CL17)Paper leading edge shutter solenoid/3 (SD14)Shutter solenoid/Fr3 (SD15)Shutter solenoid/Rr3 (SD16)Floating duct solenoid/Fr3 (SD17)Floating duct solenonid/Rr3 (SD18)

Suction failure occurs at lower tray and jam occurs.

ICP26 5V 5V Each IC on the PFU drive boardC-5100, C-5101, C-5109, C-5121 (1st PF)C-5102, C-5103, C-5137 (2nd PF)

ICP27 12V 12V Each IC on the PFU drive board C-0405

ICP28 -12V -12V -12V for Multi-feed detect, -5V for off-centeringJ-1649 (multi-feed detection) or centering error occurs onimage.

ICP29 24V2 24V2 Paper lift motor/2 (M8) C-0212 (1st PF)C-0221 (2nd PF)

ICP30 24V2 24V2 Paper lift motor/3 (M9)C-0215 (1st PF)C-0224 (2nd PF)

ICP31 24V2 24V2 Paper lift motor/1 (M7)C-0209 (1st PF)C-0218 (2nd PF)

ICP1 +5V +5V CCD board C-6708 (AOC/AGC abnormality)ICP2 +12V +12V CCD board C-6708 (AOC/AGC abnormality)ICP5 +5V +5V Each IC in the scanner relay board C-6708 (AOC/AGC abnormality)

ICP6 +12V +12VInside scanner board, ICP2 of scanner relayboard

C-6708 (AOC/AGC abnormality)

Scanner relay board A1RHH020

PFU drive boardA1RGH010

Konica Minolta Confidential

3/6

EF-101 (A1RJ) ICP LIST Konica Minolta Confidential

July 22, 2013

Board name S/N FuseNo

Supplyvoltage onOverallwiringdiagram

Supplyvoltage onBoardcircuitdiagram

Where to supply Trouble code and Symptom to be appear

ICP2 24V 24V Gate solenoid (SD1) Gate solenoid does not work. Jam occurs.ICP3 IL24V2 24V2 De-curler Motor (M3) De-curler does not work. Depending on type of paper, jamICP4 IL24V2 24V2 Fusing swing motor (M4) Fusing swing does not moves. C-3154ICP7 24V 24V Paper exit cooling fan/Up1, Up2, Up3 (FM6, 7, C-3312ICP8 24V 24V Paper exit cooling fan/Lw1, Lw2, Lw3 (FM9, 10, C-3313ICP9 IL24V2 24V2 Ventilation fans/Rt, Lt (FM1, 2) C-3314ICP10 24V 24V Entrance cooling fan/Fr, Md, Rr (FM3, 4, 5) C-3311ICP11 12V 12V Input power supply (whole board) C-code related to fusing temperature abnormality.ICP12 24V 24V Fan, solenoid C-0450

ICP13 IL24V1 24V1Interlock:conveyance/bypass conveyance motor

C-0150 or C-0151

ICP14 IL24V2 24V2Interlock:Ventilation Fans/Rt, Lt (FM1, 2),Fusing Motor (M5)

C-3314 or C-3151

ICP15 5V 5V Input power supply (overall board) Connection is not recognized

ICP16

24V(Suppliedfrom Renoirmain body）

UP24V Mount lock solenoid (SD2) Unable to tilt or pull out the carriage lever.

ICP17 IL24V1 24V1 Entrance conveyance motor (M1) C-0150ICP18 IL24V1 24V1 Bypass conveyance motor (M2) C-0151

ICP20 24V 24V Main relayFusing lamp does not come on. C-code related to fusinglow temperature abnormality.

ICP21 IL24V2 24V2 Fusing pressure motor (M6) C-3151ICP22 IL24V2 24V2 Fusing motor (M5) C-3152

ICP23 5V 5V AC drive boardFusing lamp does not come on. C-code related to fusing lowtemperature abnormality.

Drive Control Board A1RJH010

Konica Minolta Confidential

4/6

OR-101 (A21A) ICP LIST Konica Minolta Confidential

July 22, 2013

Board name S/N FuseNo

Supplyvoltage onOverallwiringdiagram

Supplyvoltage onBoardcircuitdiagram

Where to supply Trouble code and Symptom to be appear

Control board/R A21AH010 ICP1 5V1 5V1 Control board/R, Relay board/RC-C201 (Communication error between main body and RFIDboard)

Konica Minolta Confidential

5/6

HT-506 （ A1RK)　 ICP LIST Konica Minolta Confidential

July 22, 2013

Board name S/N FuseNo

Supplyvoltage onOverallwiringdiagram

Supplyvoltage onBoardcircuitdiagram

Where to supply Trouble code and Symptom to be appear

ICP1 5V 5V Photocoupler to turn ON heater triac.

Heater does not turn ON and C-0413 (Upper tray heatertemperature rising abnormality.) occurs.* Error codes related to trays upper, middle, lower tray controloccurs.

ICP2 24V2 24V Heater relayHeater does not turn ON and C-0413 (Upper tray heatertemperature rising abnormality.) occurs.* Error codes related to upper middle lower tray control occurs.

Heater drive board A1RKH010

Konica Minolta Confidential

6/6