bnd ts dmu kinematic trace -...

Prepared by: Bill Harbin –Technical Director 1-May-09

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Creating Trace elements using Creating Trace elements using Creating Trace elements using Creating Trace elements using CATIA DMU KinematicsCATIA DMU KinematicsCATIA DMU KinematicsCATIA DMU Kinematics

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� The following licenses are required to create Trace elements:

� Digital Mockup Kinematics� Mechanical Part Design

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� Step 1: Create a Kinematic Product.

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� Step 2: Create a Law Sketch.

Make the base line a Construction element. Output the base line.

The base line represents time.

The Law curve represents angular or distance moved over

a time period.

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� Step 3: Attach the Law to the Driving Command.

a) Double pick the Driving Command.

b) Pick Linkd) Pick OK

c) Select the Law Sketch

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� Step 4: Run a Simulation with Laws.

Select the Simulation with Laws icon.

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� Step 5: Create a Simulation using Laws.

c) Pick Automatic insert.

b) Pick Use Laws

d) Run the Simulation

a) Select the Simulation icon.

e) Pick OK to save.

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� Step 6: Create Trace elements.

c) If you have created a part to store the Trace elements, select it as Reference product.

Else CATIA will create a new Part for you.

a) Select the Trace icon.

d) Pick OK to save.

b) Select the element(s) to be

Traced

BND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSourceBND TechSource

Prepared by: Bill Harbin –Technical Director 1-May-09

� Resulting Trace elements.