brammer catalogue 2013-14 cropped -14 motion control.pdf · shorter product life cycles and more...
Post on 27-Apr-2020
2 Views
Preview:
TRANSCRIPT
Mot
ion
Cont
rol
Motion Control
14
14
354
355Contact Brammer on 0870 240 2100 Motion Control 355
114
Mot
ion
Cont
rol
Festo
Festo Electrical Drive TechnologyIntroduction
Alternative impetus for more intelligent automation using electric drives
Shorter product life cycles and more product variants call for flexible systems with the following features:
Speed control Force control Acceleration control Positioning capability
Electric drive units are the ideal answer to these requirements. The precision and short cycles of electrical drive units are particularly advantageous when it comes to handling and positioning small parts.
Festo and Brammer have both pneumatic and electrical expertise that enables you to obtain ready-to-install solution packages from a single source: Drive plus Motor plus Controller. In the Festo Modular System for Handling and Assembly Technology HMT, you can choose between pneumatic, servo-pneumatic and electrical drive technology or a mixture of these technologies. The associated service packages provide you with a systematically faster way of reducing your total cost of ownership (TCO). Moreover, Festo and Brammer can support you during all stages of the value added chain – from engineering and procurement to assembly, commissioning and operation.
Servo Motors and Controllers CMMP with EMMS-AS
Intelligent motor unitDynamic and powerful positioning solutionWith I/O or fieldbus interfaceFreely programmable record memoriesMotor option: brake/gearingContact your local Brammer Sales and Service Centre for further details
Electronic End Position Controllers Soft Stop SPC11
Greatly reduced cycle timesFast, problem-free commissioningSimple conversion of existing installationsTwo freely selectable intermediate positionsContact your local Brammer Sales and Service Centre for further details
Electric Cylinder Type ESBF
Clean look and specially designed for the food amd drink industryIP65 protection classFDA approved lubricating greaseSimple sensing with selectable reference pointsContact your local Brammer Sales and Service Centre for further details
Electric Cylinder Type DNCE
Choice of spindle type, lead screw (low feed applications) and ball screw (high feed applications)Electric cylinder with lead screw spindle is self-retardingOptional IP65 protection classHigh corrosion protectionNSF-H1 lubricant for the food industryContact your local Brammer Sales and Service Centre for further details
356356
14
Mot
ion
Cont
rol
Toothed Belt Axis Type ELGA
Toothed belt and spindle axes available with flexible motor mountingSpeeds: toothed belt of up to 10 m/s, spindle up to 2 m/sAcceleration: toothed belt of up to 50 m/s2, spindle of up to 20 m/s2Strokes: toothed belt up to 8.5 metres, spindle up to 3.0 metresLonger strokes available on requestRepitition accuracy: toothes belt up to 0.08mm, spindle up to 0.003mmContact your local Brammer Sales and Service Centre for further details
Cantilever Axis Type DGEA
Dynamic with recirculating ball bearing guide
Max. stroke 1,000mmMax. speed 3 m/sRepetition accuracy ±0.05mmMax. feed force 1,000 NContact your local Brammer Sales and Service Centre for further details
Electrical Servo Drives Type DCI
Innovative servo motor MTR-DCI for positioning tasks with integrated power electronics and controller.
IP54Closed loop operationActivation via I/O or fieldbusTorque 0.17...12.3Nm16 positioning setsConstant acceleration and brakingPosition controlMax. feed force 1,500 NContact your local Brammer Sales and Service Centre for further details
Festo Drives with Linear GuideRodless Drive Units from Type DGC-8 to DGC-63
The high performance pneumatic axes with optimal precision, dynamic response and a high load capacity. With integrated guide as standard, optionally with ball bearing guide - the worlds smallest rodless drive.
Diameter 8...63mmStroke length 1...8,700mmAll control elements accessible from one sideOptimised mounting optionsFlexible and hydraulic cushioning variantsVarious guide variants: Economical basic version, Sturdy with plain bearing guide, Precise with recirculating ball bearing guideOptional second slideContact your local Brammer Sales and Service Centre for further details
Rodless Drives with Integrated Displacement Encoder Type DGCI
Pneumatic linear drives DGPI/DGPIL with integrated displacement encoder, optionally with driver or slide. Suitable for applications involving high loads and restricted installation space.
Diameter 18...63mmStroke length 100...2,000mmHuge space savingsExact positioning of workpiecesProtection class IP65With integrated displacement encoderContact your local Brammer Sales and Service Centre for further details
Festo Modular Handling SystemsIntroduction
Drives appropriate to the application
Electrical or pneumatic motion? Not an issue with Festo and Brammer - we can combine electrical and pneumatic axes and drives based on the task and the required characteristics to product the optimal solution
The ideal service portfolio
The ability to supply everything from a single source ensures maximum compatibility and increases performanceStraightforward project engineering thanks to powerful software toolsSpeedy design with 2D/3D models for downloading bills of material as well as machine documentationHarmonised and tested components and systemsAxis parameters set to default values in controllers: parameterisation required for fine tuning only - straightforward commissioning by design
Everything you need – when you need it – Tel: 0870 240 2100
357Contact Brammer on 0870 240 2100 Motion Control 357
114
Mot
ion
Cont
rol
Examples from the Modular Handling SystemH-Gantry Type EXCM
Small XY planar surface gantry with rectangular working space offering extensive functionality with a high compact designEffective loads up to 3 kgStroke scalable in X and Y axisEXCM-30 with optional Z axis and flexible motor interface top or underneathStandardised Festo plug and work solution with functional drive-controller packageClean room compatibleContact your local Brammer Sales and Service Centre for further details
Handling Module HSP
Stroke Y/Z Effective (kg) Cycle Time (s)
50/25 0.6 0.6
100/40 0.9 0.9
150/60 1.2 1.5
Key features at a glance:
High-speed handling system pre-assembled on a slotted back-plate for short strokesHandling for small to miniature workpiecesContact your local Brammer Sales and Service Centre for more details
Pick & Place HMPL/HMPL
Stroke Y/Z Effective (kg) Cycle Time (s)
50/30 0.6 1.0
100/50 1.0 1.3
200/160 2.0 2.0
Key features at a glance:
High flexibility and dynamic responseMaximum precisionActive intermediate positionContact your local Brammer Sales and Service Centre for more details
Pick & Place HMP/HMPL
Stroke Y/Z Effective (kg) Cycle Time (s)
100/50 1.0 1.2
150/50 2.0 1.6
200/100 4.0 2.0
Key features at a glance:
Y axis, sturdy and dynamic handling axis HMP, ideal for long strokes upto 400mmZ axis, HMPL with optional functions such as intermediate position module or clamping unit for strokes upto 200mmContact your local Brammer Sales and Service Centre for more details
358358
14
Mot
ion
Cont
rol
Gantry DGPL/HMP
Price Each
Stroke Y/Z Effective (kg)
Cycle Time (s)
300/100 1.0 1.5
600/100 2.0 2.5
1500/200 4.0 3.5
Key features at a glance:
Medium to long strokes along the Y axisStrokes up to 200mm along the Z axisWith pneumatic, servo-pneumatic or electro-mechanical axes for maximum flexibility and cost-effectivenessContact your local Brammer Sales and Service Centre for more details
Planar Surface Gantry 2 DG.../DGEA
Key features at a glance:
For three-dimensional automation tasksWith pneumatic, servo-pneumatic or electro-mechanical axes for maximum flexibility and cost-effectivenessContact your local Brammer Sales and Service Centre for more details
Project Engineering
A solution is designed for you as per your specifications
2D Linear Gantry
Ideal for feeding applications involving long gantry strokes : linear gantries.
The combination of a drive DG...(pneumatic, servo-pneumatic or electrical) and the electrical cantilever axis DGEA permits horizontal strokes up to 3,000mm, vertical strokes up to 800mm and effective loads up to 10kg.
Choice of pneumatic or electrical (toothed belt or spindle) drive for horizontal axisHighly dynamic response along the Z axis due to the low intrinsic load of the driveContact your local Brammer Sales and Service Centre for further details
3D Cantilever Gantry
Cantilever axes are the best triple-axis solution for applications where the handling unit needs to be retracted from the working area. Horizontal X strokes up to 3,000mm, Y strokes up to 400mm and vertical Z strokes up to 200mm as well as effective loads up to 6kg.
Choice of pneumatic or electrical drive for horizontal X axisContact your local Brammer Sales and Service Centre for further details
3-Dimensional Gantry
For universal use where workpieces need to be moved across three axes.
Facilitates horizontal X and Y strokes up to 3,000mm and vertical Z strokes up to 400mm as well as effective loads up to 10kg
Choice of pneumatic or electrical drive for horizontal X and Y axesContact your local Brammer Sales and Service Centre for further details
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100
360360
14
NOTES
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100
top related