bugera btx36000...bugera btx36000 guitar amplifiers 3,800-watt true bi-amping stereo bass amplifier...
Post on 03-Feb-2021
2 Views
Preview:
TRANSCRIPT
-
BUGERA BTX36000Guitar Amplifiers
3,800-Watt True Bi-Amping Stereo Bass Amplifier Head with Compressor and Graphic EQ
The NUKEWe call it “The NUKE” for a good reason —
with 3,800-Watts in bridged mode and 2 x 1,950 when run in stereo or bi-amped mode, this bad boy is the most powerful bass amp in the world! But The NUKE isn’t just about power. With its staggering array of tone-sculpting options, including a 3-band EQ with sweepable mids, Ultra-High, Ultra-Low and Bright switches, and a 9-band graphic EQ — The NUKE is all about tone!
Extremely Broad Tonal ToolkitAll the power in the world won’t save you if
your tone sucks! That’s why we gave The NUKE the ultimate in tone-shaping capability. Sure, you get the typical BASS, MID and TREBLE controls, but you also get total command over your bass’ “voice” via the Mid Frequency sweep control, which allows you to dial in the midrange frequency that best suits your instrument or playing style. Simply choose one of the five settings (220 Hz, 450 Hz, 800 Hz, 1.6 kHz or 3 kHz) and adjust the MID control to the desired level. For example, if you play in a serious metal band and really need to crank out hard bass, select either 220 or 450 Hz and boost the MID control. Need to scoop out the mids for slap-style funk, choose 800 Hz and lower the MID control. Sweepable mids make dialing in your tone incredibly easy and fast.
You can also take advantage of The NUKE’s boost switches to emphasize certain dedicated frequency ranges. For instance, you can add some top-end quickly by engaging the BRIGHT (centered at 2 kHz, +6dB) or the ULTRA HIGH buttons (5 kHz, +6 dB). Feel like wielding the “hammer of the gods?” Throw the ULTRA LOW switch for a fuel-injected 50 Hz excursion to Valhalla.
But The NUKE Doesn’t Stop There…
Sometimes you need even finer control of your rig’s frequency response — that’s where The NUKE’s 9-band graphic EQ comes in. Imagine the frequency range of your sound as a highway, a very wide one with nine lanes. Each of these “lanes” represents a specific frequency range. The first three lanes, labeled 33-150 Hz, contain the really low frequency stuff, mainly the lower string fundamentals, or “true” pitch. The next three lanes, labeled 300-900 Hz cover the fundamental tones of the upper strings. The final three EQ lanes (2, 5 and 8 kHz) handle the bulk of the upper harmonics, and they can make or break your sound.
• Extremely powerful 3,800-Watt true bi-amping stereo bass amplifier
• Ultra-flexible 2 x 1,950-Watt stereo or 3,800-Watt bridged mode
• Integrated Crossover with dedicated Frequency and Balance controls for bi-amping operation
• Active, ultra-musical 9-band graphic EQ for total sound control
• Dedicated Bass, Mid, Treble and additional Mid frequency control enable ultimate sound shaping
• Switchable Ultra Low and Ultra High processing for ultimate tone
• Integrated Compressor increases sustain and smoothes out volume peaks when playing dynamic slaps
• Bright function for brilliant sound enhancement, even with heavy compression
• Switchable Limiter for ultimate volume without distortion plus total system protection
• Balanced DI outputs with pre/post routing for direct connection to your mixing console
• Tuner outputs on front and rear panel
• Stereo Effects loop for external effects devices (stomp boxes, rack effects, etc.)
• Dual footswitch for graphic EQ and Effects loop included
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
• High-quality components and exceptionally rugged construction ensure long life
Continued on next page
-
BUGERA BTX360003,800-Watt True Bi-Amping Stereo Bass Amplifier Head with Compressor and Graphic EQ Features
The NUKE’s graphic EQ provides total control of the flow of audio traffic in each of these nine lanes. When properly applied, EQ makes it possible to hear all of these frequency ranges equally, thus the term equalization.
In addition to “equalizing” overall frequency response of the system, individual graphic EQ controls can also be used to artificially color sonic output by emphasizing (raising) or de-emphasizing (lowering) specific frequency bands. Put simply, you can custom-tailor the sound of your instrument by using the graphic EQ as an elaborate 9-band tone control.
Outstanding Options The NUKE is ready for both passive and
active basses, just plug in, start playing and adjust the GAIN knob until the CLIP LED barely comes on, then back it off a bit. If the LED stays lit even when the GAIN is set at zero, engage the -15 dB switch, then adjust the gain. Plug your tuner into the TUNER jack and press the MUTE button for silent tuning. There is also a second tuner jack on the back of the head for use with a rack-mount tuner, such as the BEHRINGER BTR2000.
Front Panel
Power switch
Input jack
Tuner output
Mute button
Input Gain control
Compressor on/off button
Compression level
Ultra-Low boost button (+2.5 dB @ 50 kHz)
Ultra-High boost button (+6 dB @ 5 kHz)
Bass tone control (±12 dB @ 50 Hz)
Treble tone control (+14 dB, -19 dB @ 5kHz)
Mid tone control (±15 dB @ at selected frequency)
Bright boost button (+6 dB @ 2 kHz)
Graphic EQ on/off button
Master Volume
9-band graphic EQ
Graphic EQ Main Level control
FX loop on/off button
Limiter on/off button
Crossover Frequency selector
Biamp mode button
Crossover Balance control
Mono Bridge mode button
Midrange Frequency selector (220 Hz, 450Hz, 800 Hz, 1.6 kHz,3 kHz)
Clip LED/-15 dB input pad
Continued on next page
-
BUGERA BTX360003,800-Watt True Bi-Amping Stereo Bass Amplifier Head with Compressor and Graphic EQ Features
The BTX36000 also features a built-in adjustable Compressor (from 0 to 10:1 compression) and a switchable Limiter ensuring distortion-free performance. And if bi-amping is your thing, you’ll love the onboard Crossover. Just press the BIAMP button, set the crossover frequency and adjust the Balance control for your high- and low-speaker cabinets. The NUKE even provides XLR and ¼” outputs to send a mono or stereo signal to the front of house or recording console.
Need Even More? How about two Insert Channels with
Preamp Out and Power Amp In connections? How about a footswitchable stereo Effects Loop? We even provide the footswitch, which pulls double-duty for FX and the graphic EQ.
The Last Bass Amp You’ll Ever Need
With its 3,800-Watts of available power, extensive tone-sculpting capability and
impressive feature set, the BTX36000 is equipped to handle any gig — whether you play concert-sized arenas or bash it out with an over-adrenalized drummer in your garage. With The NUKE you will be heard and your presence felt.
Drop by your BUGERA dealer today and test-drive the world’s most powerful bass amp!
Cooling fan Speaker outputs IEC power socket
Circuit breaker
FX loop Return Ch.A
FX loop Send
Channel B Insert Section
Channel A Insert Section
DI Stereo/Mono button
DI Pre/Post select button
Channel A XLR balanced Line Output
Channel A ¼" bal./unbal. Line Output
Tuner OutputSocket for included footswitch
FX loop Return Ch.B
Rear Panel
-
BUGERA BTX360003,800-Watt True Bi-Amping Stereo Bass Amplifier Head with Compressor and Graphic EQ Hook-up
Standard Mono Bridge Setup
Stereo Setup with FX Loop
Biamp Setup with FX LoopOutput A/Low
Output B/High
ReturnChannel A
BTX36000 (Biamp mode)
Tuner
Input
ULTRABASS BB410Full-Range Loudspeaker
TU300Chromatic Tuner
Outputs 1
Inputs 1 FX Send
E-Bass
Effects ProcessorVIRTUALIZER PRO DSP2024P
Racktuner BTR2000
Output AReturnChannel A/B Output B
ULTRABASS BB410(Full-Range Loudspeaker)
Outputs 1/2Inputs 1
FX Send
TunerOut
BTX36000(Stereo Mode)
Stereo Effects ProcessorVIRTUALIZER PRO
DSP2024P
E-Bass
Racktuner BTR2000
ULTRABASSBB410
BTX36000(Mono bridge mode)
Mono Bridge
InputTuner
E-Bass
-
BUGERA BTX360003,800-Watt True Bi-Amping Stereo Bass Amplifier Head with Compressor and Graphic EQ
Contact InfoBUGERA CAREFor service, support or additional information, please refer to bugera-amps.com or contact the MUSIC Group company nearest you.
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, and TURBOSOUND are part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only. Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands. 985-10000-00418
Europe MUSIC Group Services UK Tel: +44 156 273 2290 Email: CARE@music-group.com
USA/Canada MUSIC Group Services NV Inc. Tel: +1 702 800 8290 Email: CARE@music-group.com
Japan MUSIC Group Services JP K.K. Tel.: +81 3 6231 0454 Email: CARE@music-group.com
SpecsAUDIO INPUTS
INPUT 1 x ¼" mono jack, unbalanced
Input impedance 1 MΩ unbalanced (0 dB) / 80 kΩ unbalanced (–15 dB)
RETURN CHANNEL A/B 2 x ¼" mono jack, unbalanced
Input impedance 100 kΩ unbalanced
POWER AMP INPUT A/B 2 x ¼" mono jack, unbalanced
Input impedance 30 kΩ unbalanced
AUDIO OUTPUTS
TUNER OUTPUT 2 x ¼" mono jack, unbalanced
Output impedance min. 2.2 kΩ
EFFECTS LOOP SEND 1 x ¼" mono jack, unbalanced
Output impedance min. 2.2 kΩ
LINE OUTPUT A/B 2 x XLR connector, balanced / 2 x ¼" mono jack, balanced or unbalanced
Output impedance 100 Ω balanced, 51 Ω unbalanced
PREAMP OUTPUT A/B 2 x ¼" mono jack, unbalanced
Output impedance min. 2 kΩ unbalanced
Output level max. +21 dBu
Loudspeaker 3 x professional speaker connectors connector
Load impedance
both channels driven min. 2 Ω per channel
bridged mono min. 4 Ω
SYSTEM DATA
Output power
Peak power, 2 x 1950 W / 2 Ω both channels driven
Peak power, 2 x 1380 W / 4 Ω both channels driven
Peak power, 2 x 800 W / 8 Ω both channels driven
Peak power, bridged mono 3800 W / 4 Ω
Tone control range
BASS ±12 dB @ 40 Hz
MID ±15 dB @ 220 Hz / 450 Hz / 800 Hz / 1.6 kHz / 3 kHz
TREBLE ±15 dB @ 8 kHz
ULTRA LOW +2.5 dB @ 50 Hz
BRIGHT +6 dB @ 2 kHz
ULTRA HIGH +6 dB @ 5 kHz
Graphic EQ range
33 Hz ±15 dB
80 Hz ±8 dB
150 Hz ±8 dB
300 Hz ±8 dB
600 Hz ±8 dB
900 Hz ±8 dB
2 kHz ±8 dB
5 kHz ±9 dB
8 kHz ±10 dB
Compression ratio 10:1
Signal-to-noise ratio 75 dB
POWER SUPPLY
Power consumption max. 3600 W
Mains voltage / Breaker
100/120 V~ (50/60 Hz) 18 A
220/230 V~ (50/60 Hz) 10 A
Mains connector standard IEC receptacle
PHYSICAL/WEIGHT
Dimensions (H x W x D) 5.5 x 14.6 x 19.0" 140 x 370 x 485 mm
Weight 43.9 lbs / 19.9 kg
We are constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
top related