bumpers

2007 ACCESSORIES & BODY, CAB

Bumper - Santa Fe

BUMPER

FRONT BUMPER

REPLACEMENT

1. Remove the front bumper cover.

NOTE: Put on gloves to protect your hands.

When prying with a flat-tipped screwdriver, wrap it with protective tape to prevent damage.

Take care not bend or scratch the cover and other parts.

Replace any damage clips.

2007 Hyundai Santa Fe Limited

2007 ACCESSORIES & BODY, CAB Bumper - Santa Fe

2007 Hyundai Santa Fe Limited

2007 ACCESSORIES & BODY, CAB Bumper - Santa Fe

Microsoft

Saturday, September 26, 2009 1:17:00 PM Page 1 © 2005 Mitchell Repair Information Company, LLC.

Microsoft

Saturday, September 26, 2009 1:17:03 PM Page 1 © 2005 Mitchell Repair Information Company, LLC.

Fig. 1: Identifying Front Bumper Fastener Locations Courtesy of HYUNDAI MOTOR CO.

REAR BUMPER

REPLACEMENT

NOTE: After remove the rear combination lamp.

When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts your hands.

Put on gloves to protect your hands.

Take care not bend or scratch the cover and other parts.

Replace any damaged clips.

2007 Hyundai Santa Fe Limited

2007 ACCESSORIES & BODY, CAB Bumper - Santa Fe

Microsoft

Saturday, September 26, 2009 1:17:00 PM Page 2 © 2005 Mitchell Repair Information Company, LLC.

Fig. 2: Identifying Rear Bumper Fastener Locations Courtesy of HYUNDAI MOTOR CO.

2007 Hyundai Santa Fe Limited

2007 ACCESSORIES & BODY, CAB Bumper - Santa Fe

Microsoft

Saturday, September 26, 2009 1:17:00 PM Page 3 © 2005 Mitchell Repair Information Company, LLC.