by jacket on page · 3 | to begin assembling the pattern, cut off or fold the dotted margin around...
Post on 14-Sep-2020
1 Views
Preview:
TRANSCRIPT
sewdaily.com page 1 of 25
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
Project photo on page 48; instructions on page 76 of Stitch Fall 2015.jacket
cropped
pattern
by Khristal Jouett
photo by Jack Deutsch
fall 2015
Though this cropped jacket has plenty of minimalist attitude, its details lend it an appealing degree of elegance. The extended front and back yokes, overlapping back pieces, wide kimono-like sleeves, and cleanly lined interior will have you reaching for this little topper again and again.
sewdaily.com page 2 of 25
patternGettinG Started Basic techniques and terms you’ll need to know for the pattern you have downloaded.
Button + Buttonhole placement markS Solid lines indicate buttonholes. A large open circle is the button symbol and shows placement.
cuttinG lineS Multisize patterns have different cutting lines for each size.
place on fold Bracket This is a grainline marking with arrows pointing to the edge of the pattern. Place on the fold of the fabric so that your finished piece will be twice the size of the pattern piece, without adding a seam.
Grainline The double-ended arrow should be parallel to the lengthwise grain or fold unless specifically marked as crosswise. Bias grainlines will be diagonal.
notcheS Notches are triangle-shaped symbols used for accurately matching seams. Pieces to be joined will have cor-responding notches.
dartS Dashed lines and dots mark darts. The dashed lines show where the stitching will be, and the dot shows the position of the dart point (signaling the point, at the end of the dart, where your stitching should end).
pattern dotS Filled circles indicate that a mark needs to be made (often on the right side of the fabric) for placement of elements such as a pocket or a dart point. Mark by punching through the pat-tern paper only, then mark on the fabric through the hole.
SlaSh markS A dashed line (some-times appearing with pattern dots) indicates an area to be slashed. Further instructions for making the slash will be included in the pattern instructions.
pattern SymBolS + markinGSaSSemBlinG full-Size pattern printout
1 | When prepar-ing to print the PDF, make sure that you are printing it at 100% and that there is no scaling. Check the settings for page scaling (should be “None”) and check the preview to make sure that you will be printing at full size. Make sure that the box labeled “Auto-Rotate and Center” is unchecked (instructions apply specifically to Adobe Reader; if using another PDF reader, check for similar settings).2 | To ensure that the pattern has printed at the correct scale, check the size of the TEST SQUARE. The Test Square should be 2" × 2" (5 × 5 cm).3 | To begin assembling the pattern, cut off or fold the dotted margin around each page.4 | The pages are numbered in rows, so the first row of pages is numbered 1a, 1b, 1c, etc. Line up the rows and match the dotted lines together so they overlap. Tape the pages together. Use the illustrated guide to match each piece. Once the pattern is complete, find your size, pin the pattern to the fabric, and fol-low the coordinating line to cut out or trace the pattern.
layout, markinG + cuttinG GuidelineS
1 | Find the lines that correspond to your size and trace the pattern pieces, either on tissue paper or directly onto the fabric, using tracing paper and a tracing wheel. 2 | If you are cutting pattern pieces on the fold or cutting two of the same pattern piece, fold the fabric in half, selvedge to selvedge, with right sides together. Note that this technique is not appropriate for some fabrics so check the project instructions if you are unsure. 3 | Lay the pattern pieces on the fabric as close together as possible. Double-check that all pattern pieces to be cut “on the fold” are placed on the fold.4 | Make sure all pattern pieces are placed on the fabric with the grainline running parallel to the lengthwise grain unless a crosswise or bias grainline is present. 5 | Copy all pattern markings onto the wrong side of the fabric unless otherwise noted.6 | Read through all cutting instructions listed in the project instructions for directions on how many pattern pieces to cut out of your fabric and interfacing.7 | Use weights to hold the pattern pieces down and use pins to secure the corners as needed.8 | Cut the pieces slowly and carefully.
TesT square2" 2" [5 5 cm]
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxx
XL
L
M
S
XS
XLLMSXS
cut on fold
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxx
XL
L
M
S
XS
XLLMSXS
cut on fold
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxx
XL
L
M
S
XS
XLLMSXS
cut on fold
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxx
XL
L
M
S
XS
XLLMSXS
cut on fold
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxxX
L
L
M
S
XS
XLLMSXS
cut on fold
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxx
XL
L
M
S
XS
XLLMSXS
cut on fold
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxx
XL
L
M
S
XS
XLLMSXS
cut on fold
ASYMMETRICAL FOLDS SKIRTRIGHT FRONT
cut 2 XXxx
XL
L
M
S
XS
XLLMSXS
cut on fold
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
FALL 2015
sewdaily.com page 3 of 25
cutting layoutFALL 2015
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
cropped jacket45" main4-10 11⁄8 yards
cropped jacket45" main12-18 11⁄4 yards
05-16-15
Cropped Jacket45” main
12-18 1 1/4 yds
05-16-15
Cropped Jacket45” Main
4-10 1 1/8 yds.
selvedges
fold
FRO
NT
YOK
E (A
)
BA
CK
YO
KE
(B)
JAC
KET
BA
CK
(D)
CO
LLA
R (E
)
SLEE
VE (G
)
CO
LLA
R (E
)
JAC
KET
FR
ON
T (C
) ZIPPER PLACKET (F)
selvedges
fold
ZIPPER PLACKET (F)
FRO
NT
YOK
E (A
)
BAC
K Y
OK
E (B
)
JAC
KET
BAC
K (D
)
CO
LLAR
(E)
CO
LLAR
(E)
SLEE
VE (G
)
JAC
KET
FR
ON
T (C
)
sewdaily.com page 4 of 25
cutting layoutFALL 2015
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
cropped jacket60" main4-10 1 yard
cropped jacket60" main12-18 11⁄8 yards
FRO
NT
YOK
E (A
)
BAC
K Y
OK
E (B
)
JAC
KET
BAC
K (D
)
CO
LLAR
(E)
SLEE
VE (G
)
CO
LLAR
(E)
JAC
KET
FR
ON
T (C
)
ZIPPER PLACKET (F)
05-16-15
Cropped Jacket60” Main
4-10 1 yd.
selvedges
fold
FRO
NT
YOK
E (A
)
BAC
K Y
OK
E (B
)JA
CK
ET F
RO
NT
(C)
JAC
KET
BAC
K (D
)
ZIPPER PLACKET (F)
CO
LLAR
(E)
SLEE
VE (G
)
CO
LLAR
(E)
05-16-15
Cropped Jacket60” Main
12-18 1 1/8 yd.selvedges
fold
sewdaily.com page 5 of 25
cutting layoutFALL 2015
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
cropped jacket45" lining4-10 11⁄8 yard
cropped jacket45” lining12-18 11⁄8 yards
FRO
NT
YOK
E (A
)
BA
CK
YO
KE
(B)
JAC
KET
BA
CK
(D)
CO
LLA
R (E
)
SLEE
VE (G
)
CO
LLA
R (E
)
JAC
KET
FR
ON
T (C
)
selvedges
fold
05-16-15
Cropped Jacket45” Lining
4-10 1 1/8 yds.
FRO
NT
YOK
E (A
)
BA
CK
YO
KE
(B)
JAC
KET
BA
CK
(D)
CO
LLA
R (E
)
SLEE
VE (G
)
CO
LLA
R (E
)
JAC
KET
FR
ON
T (C
)
05-16-15
Cropped Jacket45” Lining
12-18 1 1/8 yds.
selvedges
fold
sewdaily.com page 6 of 25
cutting layoutFALL 2015
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
cropped jacket60" lining4-10 7⁄8 yard
cropped jacket60" lining12-18 1 yard
05-16-15
Cropped Jacket60” Lining
4-10 7/8 yds
FRO
NT
YOK
E (A
)
BAC
K Y
OK
E (B
)
JAC
KET
BAC
K (D
)
CO
LLAR
(E)
SLEE
VE (G
)
CO
LLAR
(E)
JAC
KET
FR
ON
T (C
)
selvedges
fold
FRO
NT
YOK
E (A
)
BAC
K Y
OK
E (B
)
JAC
KET
BAC
K (D
)
CO
LLAR
(E)
SLEE
VE (G
)
CO
LLAR
(E)
JAC
KET
FR
ON
T (C
)
05-16-15
Cropped Jacket60” Lining
12-18 1 yd.selvedges
fold
sewdaily.com page 7 of 25
cutting layoutFALL 2015
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
cropped jacket60" interfacing4-10 15⁄8 yard12-18 13⁄4 yard
BA
CK
YO
KE
(B)
JAC
KE
T FR
ON
T (C
)
JAC
KE
T FR
ON
T (C
)
JAC
KE
T B
AC
K (D
)
JAC
KE
T B
AC
K (D
)
FRO
NT
YOK
E (A
)
FRO
NT
YOK
E (A
)
SLEEVE HEM (H)
SLEEVE HEM (H)
CO
LLA
R (E
)
CO
LLA
R (E
)
selvedge
selvedge
05-16-15
Cropped Jacket20” Interfacing
4-10 1 5/8 yds.12-18 1 3/4 yds.
sewdaily.com page 8 of 25
cutting layoutFALL 2015
© F+W Media, inc. All rights reserved.
F+W Media grants permission for any or all pages in this issue to be copied for personal use.
1a 1b 1c 1d
2a 2b 2c 2d
3a 3b 3c 3d
4a 4b 4c 4d
1e
2e
3e
4e
1e
2e
3e
BOXED JACKET
4681012141618
CRO
PPED
JA
CKET
SLEE
VE (G
)cu
t 2 m
ain
(cut
1, c
ut 1
rev
erse
)4,
6,8,
10,1
2,14
,16,
18
CROPPED JACKETCOLLAR (E)
cut 2 main on foldcut 2 interfacing on fold
4,6,8,10,12,14,16,18
CRO
PPED
JA
CKET
BA
CK
YO
KE
(B)
cut 1
mai
n on
fold
cut 1
lini
ng o
n fo
ldcu
t 1 in
terf
acin
g on
fold
4,6,
8,10
,12,
14,1
6,18
CROPPED JACKETZIPPER PLACKET (F)
cut 2 main (cut 1, cut 1 reverse)4,6,8,10,12,14,16,18
CRO
PPED
JA
CKET
FRO
NT
YOK
E (A
)cu
t 2 m
ain
(cut
1, c
ut 1
rev
erse
)cu
t 2 li
ning
(cut
1, c
ut 1
rev
erse
)cu
t 2 in
terf
acin
g (c
ut 1
, cut
1 r
ever
se)
4,6,
8,10
,12,
14,1
6,18
CRO
PPED
JA
CKET
JAC
KET
FR
ON
T (C
)cu
t 2 m
ain
(cut
1, c
ut 1
rev
erse
)cu
t 2 li
ning
(cut
1, c
ut 1
rev
erse
)cu
t 2 in
terf
acin
g (c
ut 1
, cut
1 r
ever
se)
4,6,
8,10
,12,
14,1
6,18
CROPPED JACKETSLEEVE HEM (H)
cut 2 interfacing (cut 1, cut 1 reverse)4,6,8,10,12,14,16,18
CRO
PPED
JA
CKET
JAC
KET
BA
CK
(D)
cut 2
mai
n (c
ut 1
, cut
1 r
ever
se)
cut 2
lini
ng (c
ut 1
, cut
1 r
ever
se)
cut 2
inte
rfac
ing
(cut
1, c
ut 1
rev
erse
)4,
6,8,
10,1
2,14
,16,
18
1a
BOXED JACKET
4681012141618
CRO
PPED
JA
CKET
SLEE
VE (G
)cu
t 2 m
ain
(cut
1, c
ut 1
rev
erse
)4,
6,8,
10,1
2,14
,16,
18
1b
1c 1d
CRO
PPED
JA
CKET
FRO
NT
YOK
E (A
)
1dCR
OPP
ED J
ACK
ETFR
ON
T YO
KE
(A)
cut 2
mai
n (c
ut 1
, cut
1 r
ever
se)
cut 2
lini
ng (c
ut 1
, cut
1 r
ever
se)
cut 2
inte
rfac
ing
(cut
1, c
ut 1
rev
erse
)4,
6,8,
10,1
2,14
,16,
18
CRO
PPED
JA
CKET
JAC
KET
FR
ON
T (C
)cu
t 2 m
ain
(cut
1, c
ut 1
rev
erse
)cu
t 2 li
ning
(cut
1, c
ut 1
rev
erse
)
1e1ecu
t 2 m
ain
(cut
1, c
ut 1
rev
erse
)cu
t 2 li
ning
(cut
1, c
ut 1
rev
erse
)cu
t 2 in
terf
acin
g (c
ut 1
, cut
1 r
ever
se)
4,6,
8,10
,12,
14,1
6,18
2a
CRO
PPED
JA
CKET
SLEE
VE (G
)cu
t 2 m
ain
(cut
1, c
ut 1
rev
erse
)4,
6,8,
10,1
2,14
,16,
18
2b
2c 2d
CRO
PPED
JA
CKET
BA
CK
YO
KE
(B)
cut 1
mai
n on
fold
cut 1
lini
ng o
n fo
ldcu
t 1 in
terf
acin
g on
fold
2d
cut 1
lini
ng o
n fo
ldcu
t 1 in
terf
acin
g on
fold
4,6,
8,10
,12,
14,1
6,18
CROPPED JACKET
cut 2 main (cut 1, cut 1 reverse)
2e2e
CROPPED JACKETZIPPER PLACKET (F)
cut 2 main (cut 1, cut 1 reverse)4,6,8,10,12,14,16,18
3a
CRO
PPED
JA
CKET
JAC
KET
BA
CK
(D)
cut 2
mai
n (c
ut 1
, cut
1 r
ever
se)
cut 2
lini
ng (c
ut 1
, cut
1 r
ever
se)
cut 2
inte
rfac
ing
(cut
1, c
ut 1
rev
erse
)
3b
cut 2
mai
n (c
ut 1
, cut
1 r
ever
se)
cut 2
lini
ng (c
ut 1
, cut
1 r
ever
se)
cut 2
inte
rfac
ing
(cut
1, c
ut 1
rev
erse
)4,
6,8,
10,1
2,14
,16,
18
3c 3d
CROPPED JACKETCOLLAR (E)
cut 2 main on foldcut 2 interfacing on fold
4,6,8,10,12,14,16,18
3d
CROPPED JACKETCOLLAR (E)
cut 2 main on foldcut 2 interfacing on fold
4,6,8,10,12,14,16,18
CROPPED JACKETSLEEVE HEM (H)
cut 2 interfacing (cut 1, cut 1 reverse)4,6,8,10,12,14,16,18
3e3e
CROPPED JACKETSLEEVE HEM (H)
cut 2 interfacing (cut 1, cut 1 reverse)4,6,8,10,12,14,16,18
4a
4b
top related