by pioneer biomedical. hp &philips ge other monitor equipment

Anesthetic Gas ModulesBy Pioneer Biomedical

HP &Philips

GE

Other monitor equipment

Introduction

Thank you KAMI for letting us host your meeting!

Mike CorumDan ChapmanBrendan Healy

www.AGM-parts.comDedicate website for Anesthetic Gas Monitoring, AGM-Parts.com

M1026A support

M1026A & M1026B

M1026A & M1026B

Inside look

M1026A Insides

Flow Diagram

Major Problems

Problem Hierarchy

Unit without errors

Common Problem #1

Agent ID replacement

Common Problem # 2

Common Problem # 3

Other IR Bench errors

Measurement Optic Path shows failure and Main board failure

Noisy Baseline on CO2, N2O, or AgentGas Analyzer Equipment Malfunction or

communication problem

Replacing the IR Bench

Transferring Data

Check out procedure

1 Perform Mechanical/Visual Checks  2 Check Error Contents 3 Check System Ventilator Fan Operation 4 Perform Pump Test 5 Replace Internal Nafion Tubing 6 Replace Manifold Seals 7 Replace Room Air Filter 8 Replace Pump Filter 9 Pump Hours: 10 Check Pneumatic System Leakage 11 Check/Calibrate Pneumatic System Flow rates and set (150 and 310 ml/min) 12 Perform Zero Calibration 13 Perform Barometric Pressure Check/Calibration 14 Perform another Zero Calibration 15 Perform Span Calibration Check on all gas channels and agents 16 Repeat Zero Calibration, check displayed values 17 Perform Electrical Safety Check

Quality assurance- what customers get from us

Checking Nafion Tubing

Leak Check

Checking flows

Need:Flow meterTubing

Adjusting flows

Normal Flow Adjustment

Purge Flow Adjustment

Barometric Pressure Check

SPAN calibration of all gases

GE

Other monitor equipment

HP &Philips

Conclusion

For parts, tech help, PM kits, Pioneer Biomedical 1-888-644-3274

Air Liquide, 1-215-766-7407, x1235, for combined M1026A & M1026B cal gas

Part # 47068SR 3% isoflurane, 5% C02, 40% Nitrous Oxide, Bal O2 works for both M1026A and M1026B