c4000 advanced ex exs-06c6203b020 - sick.com · pdf filea b c d e f h i j k l m n o p q r s t...
Post on 24-Mar-2018
215 Views
Preview:
TRANSCRIPT
On
lin
e d
ata
sh
ee
t
EXS-06C6203B020C4000 Advanced Ex
SAFETY LIGHT CURTAINS
ABCDEF
HIJKLMNOPQRST
EXS-06C6203B020 | C4000 Advanced ExSAFETY LIGHT CURTAINS
Ordering information
Type Part no.
EXS-06C6203B020 1068398
Included with delivery with every device: 1 system connecting cable with flying leads 30 m in length, plus a connection cablefor configuration and diagnostics of the safety light curtain.
Other models and accessories www.sick.com/C4000_Advanced_Ex
Detailed technical data
Features
System part Sender
Resolution 30 mm
Protective field height 600 mm
Scanning range 0 m ... 16 m
Synchronization Optical synchronisation
Safety-related parameters
Type Type 4 (IEC 61496-1)
Safety integrity level SIL3 (IEC 61508)SILCL3 (EN 62061)
Category Category 4 (EN ISO 13849)
Performance level PL e (EN ISO 13849)
PFHD (mean probability of a dangerous fail-ure per hour)
15 x 10-9 (EN ISO 13849)
TM (mission time) 20 years (EN ISO 13849)
Safe state in the event of a fault At least one OSSD is in the OFF state.
Functions
Functions Delivery status
Restart interlock ✔ External
External device monitoring (EDM) ✔ Deactivated
Beam coding ✔ Uncoded
Safe SICK device communication via EFI ✔
2 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-03-29 21:36:27
Subject to change without notice
EXS-06C6203B020 | C4000 Advanced ExSAFETY LIGHT CURTAINS
Interfaces
System connection
Connection type Hirschmann female connector M26, 12 pin
Permitted cable length ≤ 50 m
Display elements 7-segment display
Fieldbus, industrial network
Integration via EFI gateways CANopen, Ethernet, PROFIBUS DP, PROFIBUS PROFIsafe, PROFINET PROFIsafe 1)
Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 2)
1) For a suitable EFI-gateway see modules and gateways in the accessory section of connection systems.2) For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
Electrical data
Protection class III (EN 50178)
Power consumption ≤ 2 A
Mechanical data
Housing cross-section 161.8 mm x 142.1 mm
Weight 28.512 kg (± 50 g)
Ambient data
Enclosure rating IP66 (EN 60529)
Ambient operating temperature 0 °C ... +55 °C
Storage temperature –25 °C ... +70 °C
Air humidity 15 % ... 95 %, Non-condensing
Vibration resistance 5 g, 10 Hz ... 55 Hz (EN 60068-2-6)
Shock resistance 10 g, 16 ms (EN 60068-2-27)
Other information
Wave length 950 nm
Classifications
ECl@ss 5.0 27272704
ECl@ss 5.1.4 27272704
ECl@ss 6.0 27272704
ECl@ss 6.2 27272704
ECl@ss 7.0 27272704
ECl@ss 8.0 27272704
ECl@ss 8.1 27272704
ECl@ss 9.0 27272704
ETIM 5.0 EC002549
ETIM 6.0 EC002549
UNSPSC 16.0901 46171620
2018-03-29 21:36:27 | Online data sheet
Subject to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 3
ABCDEF
HIJKLMNOPQRST
EXS-06C6203B020 | C4000 Advanced ExSAFETY LIGHT CURTAINS
Dimensional drawing (Dimensions in mm (inch))
C4000 Advanced Ex, 600 mm
17
7.6
(6
.99
)2
67
.4 (
10
.53
)
6.4(0.25)
9.5(0.37)
67.5(2.66)
58.7(2.31)
161.8(6.37)
89.6(3.53)
44.5(1.75)
1,1
00
.2 (
43
.31
)
1,0
68
.2 (
42
.06
)
1,0
35
(4
0.7
5)
142.1(5.59)
50
.8(2
.00
)
4 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-03-29 21:36:27
Subject to change without notice
EXS-06C6203B020 | C4000 Advanced ExSAFETY LIGHT CURTAINS
Connection diagramC4000 Advanced safety light curtain on UE402 safety switching amplifier
+24V
Test
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
GND
FE
+24V
RES
EDM
EFIa
EFIb
OSSD1
OSSD2
ADO
RR
GND
FE
1
3
4
5
6
7
8
9
10
2
FE
1
5
6
9
10
3
4
7
8
2
FE
C4000S C4000R
H3 H2 K1 K2
SCC S6
+24 V DC
0 V
2) PELV
1)
k1 k2
k2
yx
yx
z
z
k1
TDC BDC
S5k1
k2
S1
3 4 1 5 6 7 8 13 14
1 2 3 4 5 6
15 16 9 11 10 12 2
UE402
E117482/00/2014-06-12
TaskIntegration of a C4000 Advanced safety light curtain with UE402 in a controller. Six configurable operating modes with restart inter-lock and external device monitoring. PSDI mode with TDC, BDC, SCC. Teachable blanking areas.Operating characteristicsIf no object is detected in the active protective field and the K1 and K2 contactors are in the de-energized position, the H3 lampflashes as a prompt to operate S1 control switch. The OSSDs are switched on when S1 is operated (button is pressed and re-leased). These outputs activate K1 and K2 contactors. Upon the detection of an object in an active protective field, the OSSDs de-activate K1 and K2 contactors.Fault analysisThe incorrect functioning of one of the K1 or K2 contactors does not result in the loss of the shutdown function. OSSD cross-cir-cuits and short-circuits are detected and lead to the inhibited state (lock-out). On manipulation (e.g., jamming) of the S1 button, thesystem does not enable the output current circuits.Comments1) Output circuits: These contacts are to be connected to the controller such that, with the output circuit open, the dangerous stateis disabled. For categories 4 and 3, this integration must be dual-channel (x/y paths). Single-channel integration in the control (zpath) is only possible with a single-channel control and by taking the risk analysis into account.2) PELV in accordance with the requirements in EN 60204-1 / 6.4Please see the operating instructions for the related devices to obtain information on the effects of the functions with configurableparameters. This information is to be observed.
2018-03-29 21:36:27 | Online data sheet
Subject to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 5
ABCDEF
HIJKLMNOPQRST
EXS-06C6203B020 | C4000 Advanced ExSAFETY LIGHT CURTAINS
Recommended accessoriesOther models and accessories www.sick.com/C4000_Advanced_Ex
Brief description Type Part no.
Terminal and alignment brackets
2 pieces, alignment bracket for explosion-proof enclosure BEF-1SHABRST2 2072525
Plug connectors and cables
Cable gland for the European market Cable gland 5329002
Alignment aids
Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look intothe beam!
AR60 1015741
Adapter AR60 for explosion-proof enclosure AR60 adapter, Ex 2074849
Test and monitoring tools
30 mm diameter Test rod 30 mm 2022602
6 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-03-29 21:36:27
Subject to change without notice
Onlin
e da
ta s
heet
SICK AG | Waldkirch | Germany | www.sick.com
SICK At A GlAnCeSICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and require-ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma-chine life cycle and ensure safety and productivity.
For us, that is “Sensor Intelligence.”
WOrldWIde preSenCe:Contacts and other locations – www.sick.com
top related