cable management solutions - leviton · ladder rack / unistrut mounting kit fiber cable management...
Post on 25-Aug-2020
2 Views
Preview:
TRANSCRIPT
Cable Management SolutionsCable Management Solutions
2 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005
cable management solutions
3 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082
cable management solutions
vertical cable management• versi-Duct® 8" and 5" systems fit on any standard equipment rack, enabling smooth transition from horizontal panels and equipment
• vertical transition rings are compatible with flat and angled panels
fiber raceway system• this adaptable system with a vast selection of components, fits any environment
horizontal cable management• versi-Duct horizontal cable management finger spacing aligns with patch panel port openings to better manage patch cords
• horizontal D-ring managers mount above or below patch panels and support transition to vertical management
• blank panels and transitional covers fill in rack space next to patch panels to provide a seamless look and improve thermal management
rear cable management bars
• standard flat rear bars attach directly to flat and recessed flat patch panels
• high-density flat rear bars mount on the front and rear of racks and cabinets to support heavy loads of cable
• angled and recessed angled rear bars mount to the back of racks and cabinets adjacent to corresponding patch panels
velcro® branD cable management
• organizes cables without pinching and stressing copper or fiber cabling
Simplify Installations & Eliminate Clutterleviton’s cable management solutions work hand-in-hand with our large selection of industry leading patch panels. the following combinations will better organize and streamline rack space.
rear
bar
s, r
in
gs & brackets
Pg 9
velcr
o® b
rand
cable management
Pg 10-11
horiz
onta
l cab
le management
Pg 8
Pg 7
fibe
r ra
cew
ay
Pg 4-6
8" &
5"
vers
i-D
uct® systems
4 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005
features
• injection molded products eliminate sharp edges and protect cable integrity
• Durable abs plastic channels withstand years of use in demanding environments
• large finger pass-through space aligns with rack units
• included cover features unique, integrated dual-hinge for easy accessibility
• 80" channel ships in two 40" pieces for easier handling and installation
• front only or front/rear configurations
• channels kitted with Pvc plastic cover, slack spools, cable retainers and mounting brackets
• same channels can be easily adapted for side or center mount applications
• rack-mount brackets snap into vertical channel with no additional hardware required
8" versi-duct® vertical cable management
Front & rear w/ designer cover (40" section shown) 8c80l-vfr
{ }See Our
COMPLETEORDERING
GUIDEPg 12-15
8" Channel Cable Management since cat 6a installations typically include larger diameter cable and density is an issue, leviton now offers an 8" versi-Duct vertical cable management system, developed for use in today’s large scale deployments.
Rounded, dual hinge
cable concealing cover
provides a clean,
sleek look
Designer CoverDual hinge allows
covers to be opened
from both sides
Hinge
5 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082
cable retainer 89265-wr1
slack loop organizer 89265-sl1
Front only, 80" w/ designer cover (40" section shown) 8c80l-vfo
Stores cable slack
and maintains
proper bend radius
for CAT 6A cables
Slack LoopSnaps into multiple
positions along
channel fingers to
secure cable bundles
Cable Retainer
8.50"
6.90"
17.50"
8.75"
featurechannel Depth (wxD)
area (in2)
cat 6a capacity
(.354" cable)
cat 6 capacity
(.250" cable)
cat 5e capacity
(.180" cable)
8" Channel Size (per side) 8"x 8" 60 192 384 738
Finger Spacing 5.5" x 1" 5.5 24 60 114
Large Passthrough 4.8" x 2.6" 12.7 72 120 258
Small Passthrough 2.6" x 2.6" 6.8 36 72 138
8" Versi-Duct Capacitythe chart below references the maximum recommended capacity of cable allowed for the installation based on the outside cable diameter. allowances should be made for proper bend radius and future additions.
Front & rear, 80"
6 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005
{ }See Our
COMPLETEORDERING
GUIDEPg 12-15
Designer cover, snap-on, grey 59265-5Dc
5" versi-duct® vertical cable management
5" Channel Cable Management the 5" versi-Duct vertical cable management system is ideal for smaller and more flexible installations. Designed for telecommunication closets and as end caps on equipment racks, this solution provides a durable method for routing and managing cabling infrastructure.
Front & rear, 80"
5.40"
3.90"
11.60"
5.80"
Front only / Front & rear, 40" w/ standard snap-on black cover 4940l-vfo / 4940l-vfr
mounting brackets 49265-bKt
features
• injection molded products eliminate sharp edges and protect cable integrity
• Durable abs plastic channels withstand years of use in demanding environments
• 80" channel ships in two 40" pieces for easier handling and installation
• finger spacing aligns with rack units
• snap-on cable concealing covers
• front only and front/rear configurations
Finger SpacingLarge finger spacing creates flexibility in patch cord routing
featurechannel Depth (wxD)
area (in2)
cat 6a capacity
(.354" cable)
cat 6 capacity
(.250" cable)
cat 5e capacity
(.180" cable)
5" Channel Size (per side) 5"x 4" 20 60 126 246
5" Versi-Duct Capacitythe chart below references the maximum recommended capacity of cable allowed for the installation based on the outside cable diameter. allowances should be made for proper bend radius and future additions.
7 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082
fiber raceway
radius guide shown with ducting (ducting sold separately)
side Drop-off Kit for Duct raceway
suspension Kit w/ 3' 3" rod raised mounting Kit for above or below cabinet
ladder rack / unistrut mounting Kit
Fiber Cable Management route, protect and store fiber cabling with leviton’s fiber raceway system, the easy to design, easy to configure, easy to install cable management system. for use in data centers, central offices, headends and wiring closets, this versatile system provides a safe, dedicated path for mission critical network cabling.
ul 2024a riser rated For installation in telecommunication Facilities
leviton’s Fiber raceway is compliant with and listed to ul 2024a—optical Fiber cable
routing assemblies for use in telecommunication installations. it has been evaluated,
tested and approved for installation in riser applications in accordance with the national
electric code and general purpose applications.
features
• Ducting is ideal for routing and supporting cables throughout fiber networks
• 6.5' sections can be hand cut to fit exact specifications
• available in five sizes with regular or hinged covers
• slotted ducting ideal for cable with varying exit locations
• bend radius guides used with slotted ducts safely route fiber
• available in four colors, as shown below
For more information and a complete list of raceway parts, refer to leviton’s structured cabling and Power solutions catalog or Fiber raceway system brochure.
customer service at +1.425.486.2222 for sales outside the usa.
Slotted Duct
Solid Duct & Hinged Cover
Solid Duct & CoverBlack
Grey
Orange
Yellow
8 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005
{ }See Our
COMPLETEORDERING
GUIDEPg 12-15
1ru recessed angled, 4" rings 4w254-lPm
Flat w/ metal cover, 4" rings 4925c-bcm
1ru recessed Flat 49253-rcm
2ru Flat combo Front and rear 49252-Pcm
BLaNk PaNEL INSERTS
• Provide a seamless look and designate rack space for future expansion
• available for flat, angled, and recessed angled Patch Panels
VERSI-DUCT® HORIzONTaL CaBLE MaNaGEMENT
• fit all standard 19" racks and cabinets
• include bend radius compliant clips
• large finger spacing creates flexibility in patch cord routing
horizontal cable management
2ru Front & rear / Front only 492ru-hfr / 492ru-hfo
1ru Front only / Front & rear 491ru-hfo / 491ru-hfr
2ru Designer cover, snap-on, grey 49265-Dc2
cable retainer / cover Hinge 49265-wr1 / 49265-hng
Horizontal Cable Management & Accessoriesmake more efficient use of rack space with leviton’s horizontal cable managers. these solutions adjust to varying requirements and protect cabling to ensure continual system integrity.
TRaNSITIONaL COVERS
• Provide clean, aesthetic transition from angled Patch Panels to flat equipment
• available for angled and recessed angled Patch Panels
HORIzONTaL CaBLE MaNaGERS
• available in 1ru, 2ru and 4ru sizes
• all mount to standard 19" racks and cabinets
• 4ru manager includes a shelf to support patch cords
• combo managers offer front and rear management
1ru / 2ru / 4ru blank Panels 49254-bP1 / 49254-bP2 / 49254-bP4
1ru angled / recessed angled transitional cover 49254-bc1 / 4w254-bc1
Mount above or below patch panels
to organize cables horizontally
D-Rings
9 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082
{ }See Our
COMPLETEORDERING
GUIDEPg 12-15
Flat High Density 49005-Dmb
REaR CaBLE MaNaGEMENT BaRS
• standard cable management bars available in flat, angled, and recessed angled options
• extended cable management bar handles large cable volumes and includes six velcro® brand straps
• rear cable management bar for active equipment offers extended depth for power cord support and cutouts for air circulation
rear bars, rings & bracKets
Flat 49005-cmb
recessed angled 4w006-amb
3" vertical rings / 6" vertical rings / mounting tie bracket 49260-mr3 / 49260-mr6 / 49261-bKt
vertical transition rings 49262-hr1
2ru Hinged wall-mount bracket 49251-w62
3ru Front Hinged bracket 49400-fhb
Angled 49006-amb
Rear Bars, Rings & BracketsDon’t get frustrated with the final steps of your project. in recognition of the unique applications and locations where space is constrained, these added components offer a reliable, cost effective alternative to traditional designs.
High-Density Manager
Die-cast aluminum supports heavy cable loads and mounts to front or rear of racks and cabinets
RINGS & BRaCkETS
• front hinged bracket simplifies terminating cables to rear of patch panels when access is limited
• vertical transition rings are compatible with all leviton patch panels
• hinged wall-mount brackets are designed for installations where space is constrained and racks are not used
• tie brackets allow rings to be center-mounted
An open ring solution is ideal for tight spaces and smaller deployments
Vertical Rings
Flat active equipment 41188-sm2
10 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005
{ }See Our
COMPLETEORDERING
GUIDEPg 12-15
velcro® branD wraPs - bulK rolls
• available in 15, 75, and 600' bulk rolls, 0.5" width
• maroon products ul listed for use in plenum or air handling spaces per nec section 300
• cut to desired length
velcro® branD wraPs - softcinch lite rolls
• thinner material for smaller bundles
• tear by hand for quick application
• cut to desired length
• available in 75' roll, 0.5" width
velcro® branD comPression straPs
• available in 15" lengths, 0.5" width
• adjustable to support a variety of loads
• easy feedthrough slot helps secure fastening without over-tightening
• strap locked area equals 6 sq. inches
• Quick and sturdy adjustments and changes
VELCRO® BRaND TIE WRaPS
• available in 5, 8, and 12" lengths, 0.5" width
• slot helps secure fastening without over-tightening
• maroon products ul listed for use in plenum or air handling spaces per nec section 300
• all wraps come 25 units per roll
velcro® brand Fasteners
5" / 8" / 12" / tie wrap 43105-005 / 43108-008 / 43112-012
15' / 75' bulk roll 43115-015 / 43115-075
600' bulk roll 43115-600
15" compression strap 44115-15e
75' softcinch lite roll 4s115-75e
VELCRO® Brand Cable Managementleviton has expanded its selection of velcro® brand cable and utility fasteners. Plenum-ratedmaroon fasteners are now available for all tie wraps and 15- and 75-foot bulk rolls. in addition, we offer your choice of blue, yellow, orange and basic black for all velcro® brand tie wraps, bulk rolls, and compression straps. velcro® brand fasteners won’t kink cabling like plastic tie wraps can, making them an excellent choice for all your cable fastening needs.
velcro® is a registered trademark of velcro industries b. v.
11 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082
storage rings, 11.75" diameter 48900-ifr
4 New ColorsAvailable Now!
saddle ties w/ 10/32 metal rack screws / saddle ties w/ #8 wood screws
41020-sPr / 41010-sPw
J Hook 46700-slg
compression strap 45224-rcs
workstation loops w/peel-off adhesive 41225-saP
Fasteners 41030-oft
VELCRO® BRaND UTILITy FaSTENERS
• saddle ties attach to wood surfaces, relay racks, and enclosures
• J hooks are height adjustable to bypass obstacles and open to 8" diameter
• compression straps provide the ideal solution for heavy vertical cable runs
• workstation loops, with 5.25" loop, attach with convenient peel-off adhesive
• orange fasteners hold cable bundles up to 3" diameter
• storage rings for inside and outside plant ensure fiber optic bend radius; loops included
12 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005
{ }
{ }
VERSI-DUCT 8" CHaNNEL VERTICaL CaBLE MaNaGEMENT & aCCESSORIES
DescriPtion front only front & rear
Vertical 80" length, 8"W x 8"D channel w/ standard hinged black cover 8980L-VFO 8980L-VFR
Vertical 80" length, 8"W x 8"D channel w/ designer hinged grey cover 8C80L-VFO 8C80L-VFR
Vertical Center Mounting Bracket, 8" Channel 89265-BKT
Vertical Cable Retainer, 8" Channel 89265-WR1
Vertical Slack Loop Organizer, 8" Channel 89265-SL1
VERSI-DUCT 5" CHaNNEL VERTICaL CaBLE MaNaGEMENT & aCCESSORIES
DescriPtion front only front & rear
Vertical 80" length, 5"W x 4"D Channel w/ standard snap-on black cover 4980L-VFO 4980L-VFR
Vertical 40" length, 5"W x 4"D Channel w/ standard snap-on black cover 4940L-VFO 4940L-VFR
Vertical Designer Cover, 5"Channel, snap-on, grey 59265-5DC
Mounting Bracket, 5" Channel 49265-BKT
VERSI-DUCT HORIzONTaL CaBLE MaNaGEMENT & aCCESSORIES
DescriPtion front only front & rear
Horizontal Manager, 2RU, 3"W x 3"D front, 2"W x 4"D rear, w/ black cover* 492RU-HFO 492RU-HFR
Horizontal Manager, 1RU, 1.5"W x 3"D front, 1.5"W x 4"D rear, w/ black cover* 491RU-HFO 491RU-HFR
Horizontal Designer Cover, 2RU, snap-on, grey 49265-DC2
Horizontal Designer Cover, 1RU, snap-on, grey 49265-DC1
Horizontal Cable Retainer (10 per package) 49265-WR1
Horizontal Cover Hinge (4 per package) 49265-HNG
ordering guiDe
Pg 6
Pg 8
8" Front & Rear
Slack Loop Organizer
5" Mounting Brackets5" Front& Rear
2RUFront & Rear
2RU Snap-onDesigner Cover
Front Only
* Bend radius clips included
{ }Pg 4-5
13 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082
blank panel inserts & transitional covers
DESCRIPTION FlaT aNglEDRECESSEDaNglED
Blank Panel, 1RU 49254-BP1 49254-BA1 4W254-BA1
Blank Panel, 2RU 49254-BP2 49254-BA2 4W254-BA2
Blank Panel, 4RU 49254-BP4
Transitional Cover, 1RU 49254-BC1 4W254-BC1
horizontal cable managers
DESCRIPTION flaTflaT w/ mETal COvER
aNglEDRECESSED aNglED
RECESSED flaT
Horizontal Manager, 1RU, 4" metal rings 49253-LPM 4925C-LPM 49254-LPM 4W254-LPM
Horizontal Manager, 2RU, 4" metal rings 49253-BCM 4925C-BCM 49254-BCM 4W254-BCM
Horizontal Manager, 2RU, 2" metal rings 49253-2CM
Horizontal Manager, 4RU, 4" metal rings 49253-4CM 4925C-4CM
Horizontal Manager, 4RU, 6" metal rings 49253-6CM 4925C-6CM
Recessed Horizontal Manager, 1RU, 3" metal rings
49253-RCM
Horizontal Manager, 2RU,w/ plastic saddles 49252-PO2
Horizontal Manager, 1RU, w/ plastic saddles 49252-PO1
Combo Front and Rear Manager, 2RU 49252-PCM
VELCRO® Brand Horizontal Manager, 1RU 41150-019
Tie Wrap Bar, 1"H x 1.5"D 49258-TWB
SpaceMaker Cable Manager 41188-SM1
{ }Pg 8
Recessed Angled Recessed Flat Flat w/ Metal Cover
Blanks Transitional Covers
Flat Recessed Angled Recessed Angled
Angled Angled
{ }Pg 8
14 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005
{ }
{ }
{ }
cable management rings
DESCRIPTION PaRT NO.
3" Vertical Manager Rings 49260-MR3
6" Vertical Manager Rings 49260-MR6
Mounting Tie Bracket 49261-BKT
Vertical Transition Rings for Angled and Recessed-Angled Panels, 2RU 49262-HR1
rear cable management bars & accessories
DESCRIPTION flaT aNglEDRECESSED aNglED
Standard Cable Management Bar 49005-CMB 49006-AMB 4W006-AMB
High Density Cable Management Bar, 1RU 49005-DMB
Rear Cable Manager for Active Equipment, 2RU 41188-SM2
HINGED brackEts
DESCRIPTION PaRT NO.
Hinged Wall-Mount Bracket, 2RU 49251-W62
Hinged Wall-Mount Bracket, 3RU 49251-W63
Hinged Wall-Mount Bracket, 4RU 49251-W64
Front Hinged Bracket, 3RU 49400-FHB
Pg 9
Pg 9
Pg 9
ordering guiDe
High Density
Transition Rings3" & 6" Rings
Tie Bracket
Wall-Mount Bracket
Front Hinged Bracket
Angled Recessed Angled
15 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082
rear cable management bars & accessories
DESCRIPTION flaT aNglEDRECESSED aNglED
Standard Cable Management Bar 49005-CMB 49006-AMB 4W006-AMB
High Density Cable Management Bar, 1RU 49005-DMB
Rear Cable Manager for Active Equipment, 2RU 41188-SM2
{ }
{ }
velcro® brand utility fasteners
DESCRIPTION PaRT NO.
Saddle Ties w/ 10/32 metal rack screws (10 per pack) 41020-SPR
Saddle Ties w/ #8 wood screws (10 per pack) 41010-SPW
J Hook 46700-SLG
Compression Strap 45224-RCS
Workstation Loops w/ Peel-Off Adhesive (25 per pack) 41225-SAP
Fasteners, Orange (10 per pack) 41030-OFT
Storage Rings, Inside Plant, 11.75" diameter 48900-IFR
Storage Rings, Outside Plant, 24" diameter 48900-OFR
velcro® brand cable fasteners
DESCRIPTION blaCk bluE yEllOw ORaNgEmaROON(PlENum RaTED)
Tie Wrap, 5" 43105-005 43105-05L 43105-05Y 43105-05O 43105-05P
Tie Wrap, 8" 43108-008 43108-08L 43108-08Y 43108-08O 43108-08P
Tie Wrap, 12" 43112-012 43112-12L 43112-12Y 43112-12O 43112-12P
Bulk Roll, 15' 43115-015 43115-15L 43115-15Y 43115-15O 43115-15P
Bulk Roll, 75' 43115-075 43115-75L 43115-75Y 43115-75O 43115-75P
Bulk Roll, 600' 43115-600
Compression Strap, 15" 44115-15E 44115-15L 44115-15Y 45115-15O
SoftCinch Lite, 75' 4S115-75E
Pg 11
Pg 10
SoftCinch Lite
Bulk Rolls
Compression Straps
Tie Wraps
Workstation Loops
Compression Strap
Fasteners
© 2010 leviton manufacturing co., inc. all rights reserved. F/10 – #3423
Leviton Corporate Headquarters | leviton.com 201 n. service road, melville, ny 11747 usa
customer service T 800.323.8920 / +1.631.812.6000E customerservice@leviton.com
Leviton International Offices
asean countries T +1.631.812.6228E infoasean@leviton.com
europe T +47.900.94.924E infoeurope@leviton.com
south Korea T +82.2.3273.9963E infokorea@leviton.com
australia & new zealand T +64.4.562.8327E infoausnz@leviton.com
Leviton Network Solutions Division Headquarters | leviton.com/networksolutions 2222-222nd street s.e., bothell, wa 98021 usa
middle east and africaT +971.4.886.4722E lmeinfo@leviton.com
china T +86.755.3320.0588E infochina@leviton.com
india / saarc T +91.80.4322.5678E lev_india@leviton.com
latin americaT +52.55.5082.1040E lsamarketing@leviton.com
canadaT +1.514.954.1840E pcservice@leviton.com
Leviton International Regional Headquarters
inside sales T 800.722.2082E insidesales@leviton.com
international inside sales T +1.425.486.2222E intl@leviton.com
technical support T 800.824.3005 / +1.425.486.2222E appeng@leviton.com
top related