cad/cam industry service markets and analysis,...
Post on 04-Oct-2020
2 Views
Preview:
TRANSCRIPT
CAD/CAM Industry Service Markets and Analysis
Dataoyest aoMnpanyol ' DunW^
1290 Ridder Park Drive San Jose, CaUfomia 95131
(408) 971-9000 Telra: 171973
Fax: (408) 971-9003
Sales/Service offices:
UNITED KINGDOM GERMANY DATAQUEST UK Limited DATAQUEST GmbH 144/146 New Bond Street Rosenkavalierplatz 17
London WIY 9FD D-8000 Munich 81 United Kingdom West Germany
(01) 409-1427 (089) 91-1064 Telex: 266195 Telex: 5218070
Fax: (01) 491-2790 Fax: (089) 91-2189
FRANCE JAPAN DATAQUEST SARL DATAQUEST Japan, Ltd.
41, rue Ybry Tkiyo Ginza Building 92522 Neuilly-sur-Seine Cedex 7-14-16 Ginza, Chuo-ku
France Tokyo 104, Japan (1)47.58.12.40 (03) 546-3191 Telex: 630842 Telex: J32768
Fax: (01)46.40.11.23 Fax: (03) 546-3198
The content of this report represents our interpretation and analysis of information generally available to the public or released by responsible individuals in the subject companies, but is not guaranteed as to accuracy or completeness. It does not contain material provided to us in confidence by our clients.
This information is not furnished in connection with a sale or offer to sell securities, or in connection with the solicitation of an offer to buy securities. This firm and its parent and/or their officers, stockholders, or members of their families may, from time to time, have a long or short position in the securities mentioned and may sell or buy such securities.
Printed in the United States of America. All rights reserved. No part of this publication may be reproduced, stored in retrieval systems, or transmitted, in any form or by any means—mechanical, electronic, photocopying, duplicating, microfilming, videotape, or otherwise—without the prior written permission of the publisher.
© 1986 Dataquest Incorporated Also © 1981, 1982, 1983, 1984, 1985 Dataquest Incorporated
Introduction to the Service
DEFINITION OF THE SERVICE
The C/UD/CAM Industry Service (CCIS) is a comprehensive, worldwide information service that documents and analyzes many important aspects of the CAD/C/^M industry. The service consists of:
• A set of four loose-leaf notebooks containing sections on companies, products, trends, and forecasts, which are revised and updated as developments occur or additional information becomes available
• Corporate profiles on major participants in the CAD/CAM industry
• Newsletters that analyze significant industry events and analyze CAD/CAM survey data
• Inquiry services that provide direct access to the research staff for answering questions and providing backup information
• An annual conference with industry leaders to discuss developments of current interest and importance to tlie CAD/CAM industry
The CAD/CAM Industry Service analyzes and reports on the products, markets, and major companies in the CAD/CAM industry and assesses the effects of product developments, new competitors, and other changes in the market. To answer questions on the industry, we provide:
• Comprehensive information on markets, products, technologies, applications, and companies in the CAD/CAM industry
• Quantitative data on shipments, installed bases, forecasts, market segmentation, and company performance
• Qualitative insights on technology trends, new product and market developments, company and marketing strategies, product positioning, and competitive postures
NEED FOR THE SERVICE
As the CAD/CAM industry continues to grow at rates exceeding 20 percent compounded annually, the decision-making process of CAD/CAM professionals becomes increasingly complex. Dataquest's CAD/CAM Industry Service is a resource of industry experts, providing all levels of personnel at our client companies with information and analyses on the CAD/CAM industry so that decisions can be made in an informed and timely manner.
CCIS Markets © 1986 Dataquest Incorporated July Intro-1
Introduction to the Service
Industry data are gathered from a wide variety of sources providing both general and specific information. The benefits to our clients include:
• A single-source resource for decision-making support in strategic planning, product marketing, and product management
• An objective, broad coverage of interrelated markets
• An external management information source
• A dynamic, ongoing, and long-term relationship
• A decision support tool for market and strategic planning information needs and problems
INFORMATION STRUCTURE
The information available to CAD/CAM Industry Service clients is structured to provide data and analysis that is easily accessible and meaningful to a broad range of industry participants and analysts. Figure 1 graphically illustrates the structure of the CAD/CAM Industry Service data base and reporting structure.
Channel Type
Channel type, the first tier of the data base model, identifies how CAD/CAM systems reach the end user. This segment helps to distinguish the various distribution channels and marketing arrangements used when selling CAD/CAM systems.
Direct
Direct channels refer to the sale of CAD/CAM equipment directly to the end-user. This represents the sale of complete systems sold by turnkey vendors or components of a system sold by individual suppliers.
Indirect
Indirect channels identify the sale of CAD/CAM equipment through independent dealers and distributors. This channel is typically used for sales of personal computer-based CAD/CAM systems. Examples of indirect C/UI>/CAM suppliers include Businessland and ComputerLand.
m
Intro-2 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
Figure 1
Dataquest CAD/CAM Data Base Structure
Channel
Components
Applications
Regions
Systems Architecture
Price
Direct
Turnl^ey
Computers
Mechanical
Graphic Terminals
AEC
North America
Non-Turnkey
Peripherals
Mapping
Software
EDA
Europe
UK Fnon
Personal Computer
Less Than $20k
sc BE oe
Service
IC
Far East
JA KOTA SO
Standalone
$20k-$50k
MKCM
PCS
Rest of
W^orld
Host-Dependent
$51k-80k >$BOk
Indirect
Source: Dataquest July 1986
Turnkey
The turnkey channel identifies the sale of a complete CAD/CAM system, including computers, graphic workstations, operating systems, applications software, and any applicable peripherals. A turnkey sale also typically provides full system support, including system maintenance, product training, and software or applications support. Turnkey vendors essentially act as systems integrators by integrating the various components into a complete system. Examples of turnkey CAD/CAM vendors include Computervision, Daisy Systems, IBM, Intergraph, Mentor, and Prime Computer.
CCIS Markets 1986 Dataquest Incorporated July Intro-3
Introduction to the Service
Nonturnkey
Nonturnkey channels allow the user to pick and choose each of the individual system components (e.g., computers, software, etc.) and perform the system integration task to assemble a complete C/UD/CAM system. Examples of vendors who sell components directly to end users include software vendors such as PDA Engineering, MacNeal-Schwendler, Manufacturing and Consulting Services, Silvar-Lisco, and Futurenet. Examples of nonturnkey hardware vendors include Digital Equipment, Data General, and IBM.
Components
The components information tier deals with tracking the sale of five major subsystems of a CAD/CAM system, including computers, graphics terminals, peripherals, software, and service.
Computers
This area identifies the unit and dollar volume of computer sales in the CAD/C/^M industry.
Graphic Terminals
This area identifies the unit and dollar volume of graphics terminal sales in the CADICAM industry.
Peripherals
This area identifies the dollar volume of peripheral sales such as plotters and printers in the CAD/C/^M industry.
SiffhAfore
This area identifies the dollar volume of software sales in the CAD/CAM industry.
Service
This area identifies the dollar volume of hardware, software, and support service sales in the C/UD/CAM industry.
Intro-4 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
Application Type
The application segment comprises six major applications of CAD/C/yvI systems. This application breakdown aids in understanding the market dynamics of CAD/CAM systems by functional usage.
Mechanical
The mechanical CAD/CAM segment is the application of computer-aided tools for designing, analyzing, and manufacturing discrete parts, components, and assemblies. The framework in which we analyze the mechanical CAD segment includes the following major functions and their associated tasks:
• Design modeling
— Geometry creation
— Three-D wireframe
— Surface modeling
— Solids modeling
• Detail drafting
— Drawing annotation
• Analysis
— Finite element modeling and analysis
— Kinematics
— Mass properties
— Interference checking/tolerance stackup
• Manufacturing
— Numerical control tool path generation
— Flat pattern
— Nesting
— Bills of material
CCIS Markets © 1986 Dataquest Incorporated July Intro-5
Introduction to the Service
AEC
The architectural, engineering, and construction (AEC) CAD/CAM segment involves the use of computer-aided tools by architects, contractors, plant engineers, civil engineers, and others associated with A£X2 disciplines. AEC CAD/C/^M systems are generally used to aid in designing buildings, power plants, process plants, ships, and other types of nondiscrete entities. Major computer-aided applications found in the AEC market include:
• /^chitectural/structural design and drafting
• Piping layout, design, and analysis
• Heating, ventilating, and air-conditioning (HVAC)
• Facilities management
Mapping
Mapping CADICA^ applications allow civil engineers, utilities engineers, geophysicists, and geologists to graphically represent data used in the creation of maps. Applications include:
• Exploration mapping
• Utilities mapping
• Cadastral mapping
• Coordinate geometry conversion (COGO)
• Contour mapping
• Geophysical mapping
EDA
The electronic design automation (EDA) CADICAM. segment refers to products that are typically used in the engineering or design phase of electronic products (as opposed to the physical layout of the product). EDA systems are used most often by electrical engineers (EEs).
The output of an EDA system is a netlist, which is a logical or functional description of an electronic circuit, a printed circuit board, a system, or a product. The output is then used in another phase of the electronic product design cycle to manually or automatically create the physical layout.
Intro-6 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
EDA systems may include the following functional items:
• Schematic capture
• Logic simulation
• Circuit simulation
• Timing verification
• Fault simulation
• Test pattern generation
• Thermal analysis
• Netlist extraction (NLE)
• Engineering documentation
• Interfaces to external CAD/EDA tools
IC
The integrated circuit (IC) CAD/C/y^ market segment consists of products that are used to create the geometrical descriptions of an integrated circuit. The output of an IC CAD system is data that are to be read, or are to be formatted to be read by, a pattern generation device. By definition, an IC CAD system's output is pattern generation data.
The scope of the IC CAD segment typically includes the following types of functional items and design methodologies:
• Geometry creation and editing
• Layout verification, including:
— Design rule checking
— Electrical rule checking
— Netlist comparison
• /^ray place and route
• Cell place and route
CCIS Markets © 1986 Dataquest Incorporated July Intro-7
Introduction to the Service
• Silicon compilation
• PLA compiler
• Symbolic layout
• Spacing and compaction
PCB
The printed circuit board (PCB) applications segment refers to the end product being designed—printed circuit boards. PCB CAD systems are typically used by PCB drafters to create the layout of the traces and components to be placed on the board.
The output of a PCB system is the graphical description of the board's layout and is used in various manufacturing steps. Output typically consists of the following:
• Photoplotter tape
• Silk screens
• Insertion drawings
• Numerical control drill tapes
Region
The geographic segment of the CAD/CAM Industry Service data base defines four regions into which CAD/CAM systems are sold. This segmentation aids in understanding the geographic characteristics of the areas where C/UDfC/ M systems are sold and delivered.
North America
The North /American segment includes sales of CAD/CAM systems in the United States, Canada, and Mexico.
Europe
Europe includes the sale of CAD/CAM systems into the following countries and European areas:
• Benelux countries • United Kingdom
• France • West Germany
Intro-8 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
• Italy • Rest of Europe
• Scandinavian countries
Far East
The Far Eastern region includes the sale of CAD/CAM systems into the following countries:
• Hong Kong • People's Republic of China (PRO)
• Japan • Singapore
• Korea • Taiwan
Rest of World
The Rest of World segment includes the sale of CAD/CAM systems from territories not included in either the North American, European, or Far Eastern regions.
Product Type
Product type segmentation identifies three major workstation architectures being delivered into the CAD/C/^M market. This segmentation aids in understanding the trends related to the types of systems being purchased.
The three types of products are personal computers, standalone workstations, and host-dependent workstations. The major distinction among these product types is that personal computers and standalone workstations contain their own CPUs and operating systems and, therefore, are classified as being fully distributed systems. Host-dependent systems, however, are considered shared-logic systems because their CPUs and operating systems are utilized as shared resources. For counting purposes, Dataquest treats personal computers and standalone workstations as both system units and workstation units.
Personal Computers
A personal computer-based workstation is defined as having the following characteristics:
• Local 8/16-bit central processing unit
• Nonvirtual operating system
• Single processing capability
CCIS Markets © 1986 Dataquest Incorporated July Intro-9
Introduction to the Service
Examples of personal computer-based workstations are the IBM PC AT and the Apple Macintosh.
Standalone Workstations
A Standalone workstation is defined as having the following characteristics:
• Resident operating system
• Virtual operating system
• Multitasking
• Networked communications support
• Integrated graphics
Examples of standalone-based workstations are Apollo's DN 660, Sun's 2/120, Intergraph's Interpro 32, and Daisy's Logician.
Host-Dependent Workstations
A host-dependent workstation is defined as having the following characteristics:
• External central processing unit
• No local Operating system
• Conditioned environment requirements
Examples of host-dependent products are Digital's VAX 11/780, IBM's 4361, and Computervision's CDS 4000.
Pricing
The pricing segment identifies three major price categories of CAD/CAM products. The price categories include the cost of the computer, workstation, associated peripherals, hardware, software, and service amortized over the number of workstations per CPU, yielding an average cost per "seat," or access to the CAD system. The three categories are:
• Average workstation price of less than $20,000
• Average workstation price greater than $20,000 but less than $50,000
• Average workstation price greater than $50,000 but less than $80,000
Intro-10 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
• Average workstation price greater than $80,000
COMPANIES
Dataquest has expanded the number of companies included in our forecast model. The model consists of two groups of companies: those listed individually and those consolidated into "Other."
The following companies are listed individually:
Applicon
Auto-trol
Autodesk
Cadnetix
Calay
Calcomp
Calma
Cimlinc
Computervision
Control Data
Daisy Systems
Ferranti
Futurenet
Gerber Scientific
Gerber Systems Technology
Graftek
Hewlett-Packard
Holguin
IBM
Intergraph
Matra Datavision
McAuto
MacNeal-Schwendler
Mentor Graphics
Prime Computer
Racal-Redac
Scientific Calculation
SDRC
Silvar-Lisco
Synercom
Telesis
Tektronix
Valid Logic
Zycad
CCIS Markets 1986 Dataquest Incorporated July Intro-11
Introduction to the Service
HOW TO USE THE SERVICE
Due to the vast amount and dynamic nature of information that is disseminated, the Dataquest CAD/CAM Industry Service offers four means of access to our research:
• Research notebooks
• Newsletters
• Inquiry service
• Annual conference
Research Notebooks
The four CCIS research notebooks contain the core of the CAD/CAM Industry Service research.
• The Markets and Analysis notebook contains the following information:
— CAD/CAM industry overview with projections and trends
— In-depth market analysis by application, geographical region, and product type
• The Forecast Data Base notebook contains the following information:
— Industry forecasts from 1981 through 1990
— Market share estimates from 1981 through 1985
— Historical company data from 1981 through 1985
• The Newsletters notebook is an archive for the CAD/CAM Industry Service Research Newsletters.
• The Corporate Profile notebook contains information on the major CAD/CAWL vendors.
Newsletters
CCIS Research Newsletters contain information that is either industry event oriented (e.g., major product announcements) or based on a Dataquest primary research effort (e.g., end-user survey). The Dataquest CAD/CAM Industry Service typically publishes two to five newsletters per month. /UI copies of the newsletters are found in the Newsletters notebook.
Intro-12 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
Inquiry Service
The inquiry service allows a client to directly access any of the CCIS research staff for up-to-the-minute information and analysis via telephone, telex, facsimile, or visits. This also allows a client to obtain information on a specific question or topic not found in the printed publications. To support this direct-line access, Dataquest has a highly professional research staff with an in-depth background in the CAD/CAM industry. To contact the staff, please write, call, telex, FAX, or visit the following address:
Dataquest Incorporated 1290 Ridder Park Drive
San Jose, California 95131 Telephone: (408) 971-9000 Telex: 171973
FAX: (408) 971-9003
Annual Conference
The annual CCIS conference is a two-day, in-depth conference held in the calendar second quarter at a resort location. The purpose of the conference is to provide a forum for the Dataquest research staff and other industry experts to share their thoughts and ideas on the CAD/CAM industry. One of the key elements of the conference is the presentation of Dataquest's current market numbers and market shares along with our projections for ttie next five years. All of the presentations are included in a large loose-leaf binder and distributed at the conference.
Dataquest's CAD/CAM Industry Service clients are entitled to one free reservation at the conference. Additional employees from client companies can attend at reduced rates.
FORECASTING METHODOLOGY
Dataquest's CAD/CAM Industry Service market estimates and forecasts are derived using one or more of the following techniques:
• "Bottom up" or component aggregation. This method involves adding all relevant vendor contributions to arrive at total market estimates for all historical data.
• Segment forecasting. This method involves creating individual forecasts for each application segment, including regional and product type distribution. In this way, each application segment incorporates its own set of unique assumptions.
CCIS Markets © 1986 Dataquest Incorporated July Intro-13
Introduction to the Service
• Demand-based analysis. This method involves tracking and forecasting market growth based on the present and anticipated demand of current and future users. This requires the development of a total available market (T/ VI) figure and a satisfied available market figure to accurately assess the levels of penetration.
• Capacity-based analysis. This method involves identifying future shipment volume constraints. These constraints, or "ceilings," can be the result of component availability, manufacturing capacity, or distribution capacity. In any case, a constraint in one of these areas is capable of keeping actual shipments below the demand level.
Dataquest's revenue and shipment estimates are based on the following sources:
• Information supplied by company management or gathered from publicly available published sources
• Information supplied by other Dataquest industry services relating to components/subsystems of C/\D/CAM systems
• Information provided by OEMs or resellers of the manufacturers' products
• Large-scale end-user surveys
• Senior staff estimates based on reliable historical data
The C/UD/CAM Industry Service data are based on revenue and unit data of systems sold to end users. Great care is taken with our actual unit and revenue numbers to avoid double counting.
Despite the care taken in analyzing the available data and attempting to categorize it in a meaningful way, we offer a few caveats regarding interpretation of the data:
• Certain assumptions, definitions, or conventions implicit in our forecasts may differ from those of others. Please refer to our definition of forecasting terms and analysis and interpretation of the data in the Markets and Analysis binder in order to understand our definitions.
• Our shipment estimates of systems and workstations include only those delivered to paying customers, not the total that is manufactured (the backlog).
• Revenue and average selling price estimates are based on transaction prices, not list prices.
Intro-14 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
• All data elements have been adjusted to reflect the forecast period, which is the calendar year.
• Many manufacturers do not release their actual unit sales, application distribution, geographic distribution, or product type distribution. In order to provide our clients with the most accurate forecasts, we have given careful consideration to estimating these companies' data.
• Prior to 1983, Dataquest did not geographically segment revenue other than into U.S. and non-U.S. markets. To accommodate the expanded geographic segmentation, we added all non-U.S. data into the Rest of the World segment for 1981 and 1982.
• Prior to 1983, Dataquest did not differentiate products based on hardware type. To accommodate our expanded product type segmentation, we have grouped all product types prior to 1983 into the host-dependent category. Although not all systems shipped prior to 1983 were of the host-dependent variety, the vast majority were.
DEFINITIONS OF FORECASTING TERMS
• Add-On Peripheral Revenue: The portion of add-on revenue that is associated with peripherals (Peripherals include all hardware except the CPU itself and the workstations.)
• Add-On Revenue: Revenue derived from add-ons and upgrades to systems that have been previously installed (Add-on revenue is the sum of add-on workstation revenue, add-on software revenue, and add-on peripherals revenue. By definition, add-on revenue differs from repeat business because it concerns revenue at the system level rather than the buying-company level.)
• Add-On Software Revenue: The portion of add-on business that is associated with software (Add-on software revenue may come from both turnkey companies and software-only companies.)
• Add-on Workstations Shipped: The total unit number of workstations shipped for use on previously installed host-dependent systems
• Average System Selling Price: The price a buyer pays for a CAD/C/yvi system, workstation, and all of the systems peripherals and software (In the case of standalone and personal computer-based workstations, there is a 1:1 ratio between the price of the system and the price of the workstation.)
CCIS Markets © 1986 Dataquest Incorporated July Intro-15
Introduction to the Service
• Average Workstation Selling Price: The price a buyer pays for a workstation or a CAD/CAM seat (In the case of host-dependent systems, the system price takes into account the average workstation price and the average number of workstations per system. In the case of a standalone and personal computer-based workstation, there is a 1:1 ratio between the price of the system and the price of the workstation.
• Bundled Software Revenue: The value of a turnkey system that is associated with application-related software
• Compound Annual Growth Rate (CAGR): The compound annual growth rate determines the average compound rate of growth over a specified period (The formula used to calculate CAGR is ((future value/present value) raised to the power of (1/number of years)) — 1.)
• CPU Revenue: The portion of revenue derived from a system sale that is related to the value of the CPU (In the case of standalone and personal computer-based workstations, CPU revenue and new workstation revenue are equal.)
• Increase over Prior Year: Total revenue percent change over the prior year's total revenue (The formula used for this calculation is (present year revenue minus previous year revenue) divided by previous year revenue.)
• New Peripherals Revenue: The value of all peripherals of a new system sale (Peripherals include all hardware except the CPU itself and any associated workstations.)
• New Workstations Shipped: The total number of workstations shipped as parts of new systems (In the case of standalone and personal computer-based workstations, there is a 1:1 ratio of system shipments and workstation shipments.)
• Service Revenue: Revenue derived from the service and support of CAD/CAM systems (Service revenue does not include revenue from the portions of a company's business related to service bureaus or product designs.)
• System: Comprises many parts, including the computer, operating system, peripherals, graphics devices, and application software (The lowest common denominator of a system is that it contains the CPU that runs the operating system. By this definition, standalone and personal computer-based workstations are also counted as systems.)
• System Revenue: Revenue derived from system sales (System revenue does not include service revenue or add-on/upgrade revenue. System revenue is the sum of CPU revenue, new workstation revenue, bundled software revenue, and new peripherals revenue.)
Intro-16 © 1986 Dataquest Incorporated July CCIS Markets
Introduction to the Service
• Systems Shipped: The unit number of systems shipped (In the case of standalone and personal computers, there is a 1:1 ratio of systems shipped and workstations shipped.)
• Total Peripherals Revenue: The sum of new peripherals revenue and add-on peripherals revenue
• Total Revenue: Total CAD/CAM-related revenue received, measured in U.S. dollars (It is the sum of system revenue, service revenue, and add-on/upgrade revenue. Total revenue as reported does not include revenue that a company may receive from products that are sold to another company for resale (OEM revenue.)
• Total Software Revenue: The sum of bundled software revenue, unbundled software revenue, and add-on software revenue
• Total Workstation Revenue: The sum of new workstation revenue and add-on workstation revenue
• Total Workstations Shipped: The sum of new and add-on workstations shipped
• Unbundled Software Revenue: Revenue derived from the sale of software only, or that software not sold as part of a turnkey system (Unbundled software is sold by software-only companies as well as by a growing number of turnkey companies.)
• Year-End System Population: The installed base of systems at the end of a given year, minus any system retirements (This element takes into account current year system shipments, estimated current year system retirements, and previous year system population.)
• Year-End Workstation Population: The workstation installed base at the end of a given year, less any workstation retirements (This element takes into account current year workstation shipments and retirements and previous year workstation installed base.)
CCIS Markets © 1986 Dataquest Incorporated July Intro-17
TABLE OF CONTENTS
CAD/CAM INDUSTRY SERVICE
Markets and Analyses
Title Page
INTRODUCTION TO THE SERVICE*
Need for the Service Service Structure and Terminology Service Organization and Coding Service Features and Procedures Service Staff Subscription Terms
TABLE OF C O N T E N T S
1 INDUSTRY OVERVIEW
1.1 Market Overview 1.2 Application Overview 1.3 Geographical Overview 1.4 Product Type Overview
2 MECHANICAL CAD/CAM APPLICATIONS
2.1 Mechanical Definitions 2.2 Mechanical Executive Summary 2.3 Mechanical Market Overview 2.4.1 Total Mechanical CAD/CAM 2.4.2 Mechanical Market Shares 2.4.3 Mechanical Regions 2.4.4 Mechanical Product Types
3 AEC CAD/CAM APPLICATIONS
3.1 AEC Definitions 3.2 AEC Executive Summary 3.3 AEC Market Overview 3.4.1 Total AEC CAD/CAM 3.4.2 AEC Market Shares 3.4.3 AEC Regions 3.4.4 AEC Product Types
4 MAPPING CAD/CAM APPLICATIONS
4.1 Mapping Definitions 4.2 Mapping Executive Summary 4.3 Mapping Market Overview 4.4.1 Total Mapping CAD/CAM 4.4.2 Mapping Market Shares 4.4.3 Mapping Regions 4.4.4 Mapping Product Types
* Titles in capital letters signify tabs.
CCIS Markets © 1986 Dataquest Incorporated Jan. 15
Table of Contents
CADlCAM INDUSTRY SERVICE
Markets and Analyses (Continued)
5 EDA CAD/CAM APPLICATIONS*
5.1 EDA Definitions 5.2 EDA Executive Summary 5.3 EDA Market Overview 5.4.1 Total ED A C AD/C AM 5.4.2 EDA Market Shares 5.4.3 EDA Regions 5.4.4 EDA Product Types
6 IC CAD/CAM APPLICATIONS
6.1 IC Definitions 6.2 IC Executive Summary 6.3 IC Market Overview 6.4.1 Total IC CAD/CAM 6.4.2 IC Market Shares 6.4.3 IC Regions 6.4.4 IC Product Types
7 PCB CAD/CAM APPLICATIONS
7.1 PCB Definitions 7.2 PCB Executive Summary 7.3 PCB Market Overview 7.4.1 Total PCB CAD/CAM 7.4.2 PCB Market Shares 7.4.3 PCB Regions 7.4.4 PCB Product Types
* Titles in capital letters signify tabs.
%, ©1986 Dataquest Incorporated Jan. 15 CCIS Markets
Table of Contents
CAD/CAM INDUSTRY SERVICE
Corporate Profiles
INTRODUCTION TO CORPORATE PROFILES*
Introduction to Corporate Profiles Scoreboard Five Year Overview 1983-1979 Scoreboards Adage, Inc. Apollo Computer Applicon Incorporated Auto-trol Technology Corporation Cadlinc Incorporated Calma Company Computervision Corporation Control Data Corporation Daisy Systems Corporation Data General Corporation Digital Equipment Corporation Evans & Sutherland Computer Corporation Gould Inc. Hewlett-Packard Company Intergraph Corporation IBM Corporation Lexidata Corporation LSI Logic Corporation The MacNeal-Schwendler Corporation McDonnell Douglas Automation Company Mentor Graphics Corporation PDA Engineering Personal CAD Systems, Inc. Prime Computer Inc. The Perkin-Elmer Corporation Racal-Redac Limited Scientific Calculations, Inc. Synercom Tektronix, Inc. Telesis Systems Corporation Valid Logic Systems Incorporated VLSI Technology Incorporated
" Titles in capital letters signify tabs.
CCIS Markets © 1986 Dataquest Incorporated Jan. 15
Table of Contents
CADlCAM INDUSTRY SERVICE
Data Base
Title Page
VOLUME II - INTRODUCTION*
Introduction to the Service
APPENDIX A FORECASTS
Appendix A — Forecasts A . l Forecasts — All Companies A.2 All Standalone Products A . 3 All Host-Dependent Products A. 4 All Personal Computer Products
APPENDIX B MARKET SHARE
Appendix B — Market Share B . l Market Share — All Companies B.2 All Standalone Products B.3 All Host-Dependent Products B.4 All Personal Computer Products
APPENDIX C HISTORICAL COMPANY DATA
Appendix C — Historical Company Data C.l Historical Data — By Company
APPENDIX E
Economic Data and Outlook
* Titles in capital letters signify tabs.
4 © 1986 Dataquest Incorporated Jan. 15 CCIS Markets
Table of Contents
CADlCAM INDUSTRY SERVICE
Newsletters 1985-Present
NEWSLETTERS*
DATAQUEST's Semiconductor Industry Conference: Snapshot of an Industry in Transition ADEE East Show: Partners at Work Computer-Aided Inspection: Measuring Up to Quality Engineering Workstation Market Heats Up in Japan Daisy Systems Wraps Digital's VAX Products Into Fold Sharing the Expertise: The Semiconductor and Electronic CAD Markets Team Up for Automated Design
New 68020 Workstations . . . Right On Track, But for How Long? The 22nd DAC: The Industry Shakes, Ratdes, and Rolls in Las Vegas AE Systems 85 Low-Cost Drafting Pencils Versus Integrated Solutions The Ultimate IC Design Tool Race Rages On The Generation Gap—An Update on 32-bit Microprocessors 16-Bit Microprocessor Market in 1984 1985 CAD/CAM User Survey Results CAE Systems' PC Strikes at Standalone Market The Wait is Over—Digital Unveils the Micro VAX II Whitechapel Computer Works' MG-1—A Personal Workstation Personal Computer-Based CAD/CAM—Miracle or Mirage? Conununications/Networking in Design Automation: A Vital Link Calma Announces Low-Cost GDSII 3-D Graphics Terminals—Perceptions Change as Costs Fall Tektronix Prepares to Test EDA Vendors A Silicon Valley Start-Up Takes on the CAD Market Goliaths
* Titles in capital letters signify tabs.
CCIS Markets © 1986 Dataquest Incorporated Jan. 15
Table of Contents
CADlCAM INDUSTRY SERVICE
Newsletters 1981-1984
NEWSLETTERS*
Daisy Systems Acquires Vulcan Software Platform for Electromechanical Strategy McDonnell Douglas's CIMTECH and IBM . . . Not Just Another VAR Auto-trol Eyes Data Structure Technology; Buys Tricad CAD/CAM Software: Forecasts and Analysis Digital Announces Its Most Powerful Performer—The VAX 8600 Solids Modeling: Market Potential Still Untapped Sun Microsystems Expands Product Line Intergraph—Four New Significant Products Autofact 1984 Adage: The New CAD/CAM Turnkey Vendor With the CADstation 2/50 IBM Announces New Graphics Products; Opens Door for Graphics Standards Daisy Systems Corporation: The Growth of a Company IBM Announces Awesome New Products Saber Technology Combines Design Innovation and Systems Integration The Ridge 32—Reaching New Levels of Computing Price/Performance The Design Automation Conference is the Premier EDA Show CV Acknowledges the VAX and Ushers in Medusa Personal Computer-Based CAD/CAM Systems: Market Trends Silvar-Lisco: A Software Company or a Turnkey Company? The Second Big Gun Explodes Calcomp's New 32-Bit Standalone System 25 for the AEC Market SST Systems—New Levels of Price/Performance For Plant Analysis Computer Graphics Tokyo '84 Parallax to Unveil High-Speed Graphics Controllers at NCGA Prime Computer Acquires Joint Co-ownership of Medusa Software Major Product Announcements From Mentor Graphics The Boom in Semiconductor Start-ups CAD/CAM 1983: Momentum Electronic Design Automation Year-End Summary CAD/CAM User Survey Computervision Announces Strategic Product Plan The Evolution of the Printed Circuit Board CAD Market Part 2 Apollo Delivers Non-68000 Based Systems The Evolution of the Printed Circuit Board CAD Market Part 1 The Choice is Right: Calma Positions Itself With a Choice of Product Lines IRIS—The Integrated Raster Imaging System Real Time Displays and CAD/CAM: The Weitek Approach Input Devices Report Data General Announces the Eclipse MV/4000 For Industrial and Office Automation Computervision Changes Vertical Integration Direction Announces IBM System Graphics at Work: NCGA '83 Auto-trol Reborn: Company Shows Renewed Interest in ABC CAE Electronic Design Automation System Slotted for Fall Dehvery Summary of the Design Automation Conference and the National Computer Graphics Association Conference, 1983
Titles in capital letters signify tabs.
'• ©1986 Dataquest Incorporated Jan. 15 CCIS Markets
Table of Contents
CAD/CAM INDUSTRY SERVICE
Newsletters 1981-1984 (Continued)
NEWSLETTERS* (Continued)
Apollo Computer Introduces the DN300 Networked Engineering Workstation Electronic Design Automation (EDA) and Application-Specific Integrated Circuits (ASIC) CAD/CAM in Japan Gould Moving Toward Factory Automation? Graphics Price/Performance Update Piping in AEC, Part 2 Plotters in CAD/CAM Market Forces Give Rise to New Market Segmentation Hewlett-Packard Unveils HP 9000 Engineering Workstation Piping in AEC: More Developments Needed to Meet Industry Needs Emerging Market for Personal Computer-Based CAD Systems Summary 1982: Adjustments to the Economy and a Plethora of Product Offerings Update: Integrated Circuit Design Automation Market Solid Modeling: A Key to Success in Mechanical CAD/CAM HP Announces Reorganization Prime Computer Acquires English Software Company Metheus Introduces New Generation VLSI Development System Computervision Acquires European CAD/CAM Companies Computer Companies in CAD/CAM: Prime Computer Cuts Workstation Prices CADAM: Software For IBM and IBM Plug-Compatible Machines Turnkeys Address the IC Workstation Market The IBM and IBM Plug-Compatible Graphics Display Market for CAD/CAM Applications Array Processors and CAD/CAM: The Intergraph Approach New Performance Levels for Graphics Systems in CAD/CAM Full House Dealt from DEC CAD Address the Gate Array Market The 32-Bit Computer and Its Impact on the CAD/CAM Industry Ultra High-Performance GPMC Market Update IBM Announces Reorganization Start-up CAD Companies Aim at the Engineer General Electric Unfolds Plans for Factory of the Future
' Titles in capital letters signify tabs.
CCIS Markets ©1986 Dataquest Incorporated Jan. 15
Table of Contents
(Page intentionally left blank)
© 1986 Dataquest Incorporated Jan. 15 CCIS Markets
1.0 Market Overview
Chapter 1 outlines and discusses the CAD/CAM market from a high-level perspective. It is intended to be used as a summary overview for the research presented in Chapters 2 through 7 and in the Forecast volume.
The body of this chapter follows Dataquest's CAD/C/yVI Industry Service data base format illustrated in Figure 1.0-1. Each of the six information tiers listed at the left of the figure is discussed in order, with figures, tables, and bulletized analysis.
Figure 1.0-1
Dataquest CAD/CAM Data Base Structure
Channel
Components
Applications
Regions
Systems Architecture
Price
Direct:
Turnkey 1 Nonturnkey
Computers
Mechanical
Graphic Terminals
AEC
North America
Peripherals
Mapping
Europe
UK FR
Personal Computer
Less Than $20K
GR 1 : 5C BE OE
Software
EDA
Service
IC
Far East
JA KG
Standalone
$20K-$50K
TA SG HK CH
PCB
ROW
Host-Dependent
$15K-$80K Greater Than $80K
Indirect
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.0-1
1.0 Market Overview
MARKET OVERVIEW
The CAD/CAM market remains one of the most dynamic application areas in the high-technology industry. It is a melting pot of computers, graphics, and application software that, when combined, form the nucleus of a system used to design and manufacture a wide array of products and components.
1985-SLOWING REVENUE GROWTH
From a historical perspective, 1985 was a difficult year for the major turnkey CAD/CAM vendors. As Figure 1.0-2 illustrates, the major turnkey vendors enjoyed a 40 to 50 percent year-to-year growth rate until 1985, when growth fell beiow 20 percent. Dataquest believes that this 20 percent growth rate represents a permanent correction in the marketplace. We expect that over the next five years, the CAD/CAM industry as a whole will grow at an average of 21 percent.
Percent
Figure 1.0-2
Major Turnkey CAD/CAM Percent Growth
80-
70
SO-
SO-
40-
30
20
10-
0-
1
1980 19B1 13S2 1963 1984 1985
Source: Dataquest June 1986
LO-2 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
When compared to other high-technology industries, however, the CAD/CAM industry did not fare badly. Figure 1.0-3 reveals that the adjusted CAD/CAM industry growth (discounting the sale of personal computers and nonturnkey systems) was 33 percent from 1984 to 1985. The CAD/CAM industry outperformed graphics terminais, telecommunications equipment, computers, display terminals, semiconductors, and printers. Even the 17 percent growth of the major turnkey vendors looks good compared to these other industries.
Figure 1.0-3
Selected High-Technology Industries' Growtii 1984-1985
Percent
40-
30
20-
10
^^^^^
^ ^
•L V ' \ \ %
$SSN O^'-y..
-10-
-20 CAD/CAM Graphics
Terminals Telecom
Equipment Computers Display Semiconductors Printers
Terminais
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.0-3
1.0 Market Overview
VENTURE CAPITAL SLOWDOWN
The slowing infusion of venture capital is a positive factor affecting not only the CAD/CAM industry but other areas of high technology as well. As Figure 1.0-4 indicates, Dataquest believes that venture capital commitments to independent private firms has been brought more in line with historical investing patterns. This has helped to stem the tide of "me too" companies and products that were spawned by overly ambitious venture capital outlays during 1983 and 1984. The downside to this slowing capital infusion is that IBM's $4.72 billion spent on R«&D in 1985 is more than double the entire $2.35 billion in venture capital outlays in 1985. The implications here are fairly obvious.
•
Figure 1.0-4
How Much Venture Capital Is Available?
Billions of Dollars
4-
t -
$0,216 =rv
$0,170
\ X \ \
$0,681
$0,967
$1,423
r
vVX^
$3,408
$3,185
1978 1979 1980 1981 1962 1983 1984 1985
Source: Venture Capital Journal
•
1.0-4 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
FALLING WORKSTATION PRICES
A major problem facing many CAD/CAM vendors is the dramatic decline in average workstation selling prices. Through 1983, workstations averaged around $90,000 per seat as shown in Figure 1.0-5. With the influx of personal computers and Other low-cost engineering workstations, the average selling price fell to the current $56,000 per seat. Dataquest believes that hardware prices have stabilized and most vendors have begun to realign their organizations to accommodate the changing product mix toward lower-priced systems. Therefore, Dataquest is not looking for any new dramatic market corrections as a result of lower average selling prices.
Figure 1.0-5
CAD/CAM Workstation Average Selling Prices
Thousands of Dollars
yo-
AO
7rt^
fif)
10
A0>
30
PQ^
10-
n-i
19B0 1981 1982 1983 1984 1985
Source: DaUqutit June 19S6
CCIS Markets 1986 Dataquest Incorporated July 1.0-5
1.0 Market Overview
One positive effect that has resulted from lower average selling prices is that unit demand has been highly elastic. Workstation unit shipments grew 380 percent from 1983 to 1985 while prices dropped 40 percent during the same period. Dataquest believes that a good deal of this increased demand came from first-time PC-based CAD/CAM buyers who ordinarily would not have purchased a CAD system unless it was priced at low "consumer-like" levels, which reduced the purchasing risk. Dataquest predicts that in the future, the majority of workstation purchases will come from repeat buyers who plan to expand the use of CAD/C/yvI throughout their organizations. This trend is graphically represented in Figure 1.0-6. The implications of this trend are as follows:
• Repeat purchasers have vastly different purchasing criteria and expectations than first-time purchasers.
• Repeat purchases usually have strong requirements for data and hardware compatibility with existing systems.
• Repeat purchases often encompass a much broader range of application-solution reqiiirements, such as linkage with manufacturing or testing disciplines.
•
1.0-6 © 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
Figure 1.0-6
CAD/CAM Workstations by Type of Purchaser
Number of
Workstations
2nct Time Buyers
1st Time Buyers
Time
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.0-7
1.0 Market Overview
THE LEADING VENDORS' MARKET SHARE EROSION
Dataquest has also witnessed another trend in the CAD/CAM industry over the past few years—the relative market share erosion of the top 10 CAD/CAM suppliers. Through 1983, the top 10 suppliers captured more than 80 percent of the market, as shown in Figure 1.0-7. In 1985, the top 10 suppliers' share slipped to 67 percent of the market. While this is still a rather significant share, Dataquest believes that this trend is likely to continue. In other words, we believe that a greater number of companies will share in the the wealth of the CAD/CAM industry. These emerging companies may not ever reach $200 million in revenue, but we are reasonably certain that a good number of $30 million to $100 million companies will continue to erode the overall share of the leading 10 vendors.
Figure 1.0-7
CAD/CAM Market Percent Shares of Top 10 Suppliers
Percent
100-
90-
ao-
70-
60-
50-
40-
30
20
10
0
M^ Fsss:
W^ •Mr
• SS^ ^sSW
sSS's ^ '> -V \ ,
mm i \ •
$M m^ 1980 1961 1962 1983 1984 1965
Source: Dataquest June 1986
1.0-8 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
A key factor contributing to the share erosion of the top 10 suppliers is the complexity and diversity of today's CAD/C/yVI industry. It no longer comprises a mere handful of companies chasing after the aerospace and automotive business. According to Dataquest's Who's Who In CADICAM, more than 500 suppliers provide products for markets such as technical publishing, garment design, consumer goods, and medical equipment. Many small companies are addressing niche Opportunities by coupling application expertise with CAD/CAM technology. The Autodesk third-party software catalog alone lists more than 100 enterprising young companies that have designed application-specific products that "piggy-back" the AutoCAD program. Most of these companies are down in the noise level, with less than $1 million in annual sales. But collectively, the noise these companies have made has risen to a dull roar and could become much louder in the future.
ACCESS—THE NEXT WORKSTATION PRODUCTIVITY DRIVER
Throughout the 1970s and early 1980s, most CAD/C/\M system purchases were justified on the basis of delivering sorely needed computer power to critical problems in the design process. Although this application of computer power has greatly improved the productivity of an individual or discipline, it is all too apparent that what has really happened is that that CAD/CAM system has simply moved the product automation bottleneck from one discipline to another. For example, the CAD/CAM system installed in the drafting department has allowed the delivery of a three-foot stack of drawings to manufacturing instead of a one-foot stack. The overall productivity of the operation has not improved, however, because manufacturing cannot deal with that many drawings all at once.
Dataquest believes that the next wave of workstation purchases will be justified by longer-range plans to plug all disciplines into the CADICAM network to improve productivity of the entire operation (see Figure 1.0-8). We are already seeing evidence of this trend at companies such as General Motors, Hughes, Boeing, and Rockwell.
CCIS Markets © 1986 Dataquest Incorporated July 1.0-9
1.0 Market Overview
Figure 1.0-8
CAD/CAM Systems Evolution
Productivity
A
Access
Function
Time
Source: Dataquest June 1986
1.0-10 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
THE CADICAM SOFTWARE HIDING PLACE
One of the biggest problems facing the CAD/CAM industry was pointed out by William Zarecor, Vice President of Marketing for Intergraph Corp. at the Prudential-Bache 1985 Autofact conference. As indicated in Figure 1.0-9, the declining cost of hardware is uncovering the hidden price of software. In a turnkey system, the price of the software is buried in the price of hardware. Mr. Zarecor's concern, which we also share, is the market's reaction to having to pay more for the software than the hardware. Dataquest believes that the combination of falling hardware prices, standardized hardware platforms, and smarter users will inevitably lead to the emergence of the nonturnkey market. This in turn will lead to unbundling and site licensing. There is simply not enough room in the market for two markups on hardware. CAD/CAM technology and standards have matured to the point where CAD/CAM is no longer a black art; users can now perform the necessary software and hardware integration themselves.
Figure 1.0-9
CAD/CAM Software Hiding Place
Cost
Cost Of Hardware
Software "Hiding Place"
Time Source: Intergraph Corporation
Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.0-11
1.0 Market Overview
CHANGING TREATMENT OF AUTOMATION EXPENDITURES
A major change is taking place within large manufacturing companies regarding the way in which automation expenditures (such as CAD/CAM) are handled. In the past, engineering and manufacturing had separate budgets to vertically automate their organizations, as illustrated in Figure 1.0-10. Very little time and dollars were spent ensuring that the automation equipment could be bridged across disciplines. Now, however, in order to ensure consistency, companies are building separate organizations headed by chief automation officers, to organize their strategic expenditures across disciplines (see Figure 1.0-11). For example, General Motors bought Electronic Data Systems to serve in this capacity. The implications of this change are as follows:
• CAD/CAM vendors must provide gateways or solutions that encompass a much broader range of applications.
• CAD/CAM vendors will have to deal with having their systems scrutinized in new environments and, therefore, will have to learn to speak new languages and provide support for these disciplines.
• Having C/UD/CAM systems treated as strategic, as opposed to tactical, expenditures tends to raise the purchasing decision to a higher level within an organization. In other words, the decision on which company to buy from becomes more of a business decision than a technical preference.
1.0-12 © 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
• Figure 1.0-10
Traditional Automation Budget Allocation
•
Engineering
$
Tactical
Strategic
IVIanufacturing
$
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.0-13
l.Q Market Overview
Figure 1.0-11
Future Automation Budget Allocation
Engineering Manufacturing
Chief Automation
Officer
Strategic $
$ $
Tactical Tactical
Source: Dataquest June 1986
TECHNOLOGY OPPORTUNITIES
Dataquest sees a number of key technological opportunities emerging within the CAD/CAM market over the next several years, including:
• Silicon compilation
• Desktop systems
• Expert systems
• Application accelerators
• CAD/CAM data bases
1.0-14 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
Silicon Compilation
James Solomon, president of Solomon Design Associates, calls silicon compilation the "Manhattan project of the eighties." Silicon compilation is changing the way integrated circuits are designed and is shrinking design cycles from weeks and months, to days and hours. Dataquest views silicon compilation as a replacement technology for handcrafted and place-and-route systems. In 1985, silicon compiler-based CAD systems accounted for $8.8 million in revenue. Dataquest believes that silicon compilation will grow at a 157 percent compound annual growth rate through 1990 when revenue is expected to top $520 million.
Desktop Systems
The desktop workstation technology area is experiencing explosive growth. The new breed of low-cost, high-performance systems from companies such as Apollo Computer, Digital Equipment, IBM, and Sun Microsystems is spawning a new era of price/performance. The critical need to plug many people into CAD/CAM networks at an affordable cost is accelerating the instaliation of low-cost, desktop systems. Dataquest believes that the new low-cost, high-performance, 32-bit virtual workstations will begin to place considerable pressure on personal computers beginning this year.
Expert Systems
Dataquest believes that expert systems will begin to play a more prominent role in the design of future CAD/CAM systems. However, we do not expect CAD/CAM expert system development to employ Lisp or Prolog languages running on inference engines. Rather, we believe that expert systems as applied to CAD/CAM means separating knowledge from the application and including more advanced reasoning features to help the user solve a particular problem. Dataquest believes that these systems will be designed using standard Fortran and C languages running on standard computer architectures.
Application Accelerators
Application accelerators that employ custom and semicustom integrated circuits will become more common in CAD/CAM systems. Today, application accelerators have been successfully applied to accelerate circuit simulation and graphics. Dataquest also envisions the use of accelerators to speed up finite element analysis and data base retrieval in the very near future.
CCIS Marltets © 1986 Dataquest Incorporated July 1.0-15
1.0 Market Overview
CAD/CAM Data Bases
There has been a good deal of recent discussion regarding which data base technology to use in order to manage a large CAD/CAM data base that has to be accessed by many disciplines. Most commercial data base applications were designed for payroll, order entry, and inventory management applications. CAD/CAM data bases are much more complex, primarily because they have to deal with graphical information. For example, a B-spline surface is considerably more complex than an employee record in a personnel file.
Although nothing has emerged that completely solves the myriad of problems associated with implementing large-scale CAD/CAM data bases, the approach illustrated in Figure 1.0-12 looks very promising from our perspective. SST Systems, an AEC process plant design software vendor, developed this "software switch" concept in order to better accommodate the numerous ways that piping information has to be handled. The system utilizes a relational data base as the core holding tank and employs software switches that build data bases on demand that are suited specifically for the needs of a given application. For example, the core data base might contain all of the design and fabrication information for a single process plant. To interact with the data base, software switches are devised to extract and build application data bases with data types geared specifically for P&IDs, piping runs, or detail drawings. Efficiency is no longer compromised when designing an application by being tied to a data structure that was designed for another purpose. Dataquest believes that this approach would also adapt easily to electronic and mechanical applications.
1.0-16 © 1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
Figure 1.0-12
CAD/CAM Software Switch Data Base Technology
•
•
Source: SST Systems, Inc. Dataquest June 1986
MARKET OPPORTUNITIES
Dataquest sees a number of key market opportunities emerging within the CAD/CAM market over the next several years, including:
• Mechanical computer-aided engineering
• Facilities management
Integration and support services
CCIS Markets 1986 Dataquest Incorporated July 1.0-17
1.0 Market Overview
Mechanical Computer-Aided Engineering (MCAE)
The MCAE market has received a great deal of attention recently due to the emergence of two start-ups, Aries Technology and Cognition. These two companies are attempting to build and deliver systems designed to address theconceptual design problem as opposed to the more common turnkey approach, which emphasizes drafting and documentation. Dataquest believes that the MCAE market is being driven by the following factors:
• The first 5 percent of engineering dollars spent on a particular design dictates 85 percent of the committed engineering cost. MCAE helps to ensure that the early stages of the design process yield the best possible downstream results.
• It is 100 times more expensive to make design changes in the manufacturing cycle as it is in the conceptual design stage. MCAE systems can drastically reduce expensive design changes.
• MCAE tools typically are used by a small group of highly educated individuals with advanced engineering degrees in a given engineering organization. Dataquest believes that the new breed of easier-to-use MCAE systems will open up a large, new market for the remaining engineering masses who need access to conceptual design and analysis tools.
In 1985, the MCAE market (including both hardware and software) totaled $210 million in revenue. Dataquest expects the MCAE market to grow more than 30 percent compounded annually tlirough 1990, when revenue will reach $753 million.
Facilities Management
The facilities management market deals with using a CAD system to manage physical assets such as buildings and manufacturing plants after they are built. Typical functions include space allocation, furniture layout, and asset utilization. Dataquest recently conducted a survey in the facilities management market and found that less than 2 percent of the potential market has been penetrated. The major problem in the facilities management market today is establishing clear channels of distribution. Dataquest estimates that revenue from the sale of facilities management systems reached $65 million in 1985. Revenue is expected to grow to more than $275 million by 1990, a 33 percent compound average growth rate.
•
•
1-0-18 ©1986 Dataquest Incorporated July CCIS Markets
1.0 Market Overview
Integration and Support Services
Dataquest believes that services aimed at integrating existing CAD/CAM and data processing equipment represent a very lucrative market opportunity. The real question here is not if but how to address this opportunity. IBM has begun providing commercial CIM integration services by using its Federal Systems Group in a SWAT-team fashion. McDonnell Douglas has also established a major CIM business unit to address the area of industrial integration.
MARKET PENETRATION
Table 1.0-1 itemizes U.S. market penetration by application. Dataquest believes that only 4.7 percent of the U.S. CAD/CAM market has been penetrated thus far. Although detailed overseas census information is not available, Dataquest believes that penetration on a global level is less than 5 percent.
Table 1.0-1
U .S . CAD/CAM Market Penetration 1985
Installed Workstations
Total Available Market
Penetration Percentage
Mechanical
50,900
892,000
5.7%
AEC
25,200
538,000
4.7%
Mapping
4,400
151,000
2.9%
Electronic
26,400
674,000
3.9%
Total
106,900
2,255.000
4.7%
Source: U.S. Dept. of Labor Dataquest June 1986
•
CCIS Markets © 1986 Dataquest Incorporated July 1.0-19
1.1 Industry Overview
ESTIMATED CAD/CAM WORLDWIDE REVENUE
Dataquest estimates that the 1985 C/UD/CAM market exceeded $4.8 billion in worldwide revenue, as shown in Table 1.1-1 and Figure 1.1-1 Revenue. The market is expected to grow at a 21.8 percent CAGR, exceeding $12 billion in revenue by 1990.
Dataquest forecasts the market to grow 21 percent overall in 1986, reaching $5.8 billion in revenue. The key factors influencing positive growth in 1986 are as follows:
• Lower U.S. prime interest rates
• A Strengthening U.S. economy
• Uncertainty over IBM's RT PC removed
• Improving overseas economic climate
• Low levels of CAD/CAM workstation penetration
Negative factors affecting CAD/CAM revenue growth in 1986 are as follows:
• Falloff in industrial production
• Slowing automobile sales
• Slowing commercial building starts
• Capital cutbacks in the oil industry
• Uncertainty over tax legislation
Table 1.1-1
Total CAD/CAM Market (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market
Revenue 4,849 5,863 7,116 8,624 10,397 12,511 20.9%
Systems 65 ,212 88,769 118,891 157,873 211,532 283,682 34.2% Workstations 82,056 107,051 139,497 180,471 234,056 304,055 29.9%
Source: Dataquest
June 1986
CCIS Markets © 1986 Dataquest Incorporated July 1.1-1
1.1 Industry Overview
Figure 1.1-1 Revenue
Total CAD/CAM Market
Millions of Dollars
12000-1
10000
8000
6000
4000
2000
r%:s:
m H^WSI
fl
NAV'AJ
' 1
^ ^
;si
NAKVJ
m
m
19S5 1996 1987 1988 1989 1990
Source: Dataquest June 1986
•
1.1-2 1986 Dataquest Incorporated July CCIS Markets
1.1 Industry Overview
ESTIMATED CAD/CAM WORKSTATION SHIPMENTS
Figure 1.1-1 Shipments illustrates Dataquest's estimate for CAD/CAM workstation unit growth. In 1985, more than 82,000 CAD/CAM workstations were shipped worldwide. Dataquest predicts that unit growth will be nearly 30 percent in 1986, and reach 107,051 units. Dataquest estimates that unit demand will grow at a 30 percent compound annual growth rate, swelling to 304,055 units in 1990.
Figure 1.1-1 Shipments
Total CAD/CAM Market
Workstation Shipments
320000 -
280000 -
240000-
200000
160000
120000
80000
40000
V'v xv wX^ $A^: 'X' '-X' XV-'X
[AXNXI
>.A "zs:
NX'
CvX ., vvxX wXN X%^> ^ "\-\SS
1965 1986 1987 198B 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.1-3
l . I Industry Overview
MARKET SHARE •
Figure 1.1-2 lists the top 10 CAD/CAM market share leaders in 1985, while Table 1.1-2 ranks all 1985 CAD/CAM revenue by company. The market share erosion that has beset the major CAD/CAM vendors has not been equally distributed. Companies such as Daisy, Intergraph, McDonnell Douglas, Mentor, and Prime grew at or above the normal industry average of 30 percent.
Figure 1.1-2
Total CAD/CAM Market Shares 1985
Control Data 2.4%
Daisy 2.8% Mentor prime Appllcon
2.8% 2.9% 3.2%
Source: Oataauest June 1986
1.1-4 1986 Dataquest Incorporated July CCIS Markets
1.1 Industry Overview
Table 1.1-2
Total CAD/CAM Market Shares
COMPANY
IBM Intergraph Computervision
Calma HcAuto
Applicon Prime
Mentor
Daisy
Control Data Hewlett-Packard
Auto-Trol
Valid Racal-Redac
Holguin-CAD
Scientific Calculations
Matra Datavision
Calconip
Ci Inline
Ferrant i
Autodesk Zycad
Cadnetix Graftek
Gerlser Systems MacNeal Schwendler Futurenet
Tektronix
Silvar-Lisco
Synercom Cat ay
SDRC
Telesis
Gerber Scientific
Other Computer Companies Other Europe Companies
Other Far East Companies Other Turnkey and Software
All Companies
1985 REVENUE
$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ % 4
870 526 441 183 170 155 140 137 134 116 90 65 57 51 50 48 36 33 32 27 27 26 25 24 22 21 20 20 18 17 16 15 15 6
229 231 570 184 ,849
Source:
1985
SHARE
17.9%
10.9%
9.1% 3.8% 3.5%
3.2% 2.9%
2.8%
2.8%
2.4% 1.9%
1.3%
1.2%
1.0% 1.0%
1.0%
.7%
.7%
.6%
.6%
.6%
.5%
.5%
.5%
.5%
.4%
.4%
.4%
.4%
.4%
.3%
.3%
.3%
.1% 4.7%
4.8%
11.8%
3.8%
100.0%
Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.1-5
l^lBldustry Overview
IBM
IBM was the leading CAD/C/VM vendor again in 1985, recording more than $870 million in CAD/CAM revenue. This includes the sale of turnkey CAD/CAM systems, not the sale of IBM hardware in nonturnkey channels. Dataquest estimates that IBM received an additional $200 million to $300 million from the sale of nonturnkey hardware such as personal computers used for CAD/CAM sold through indirect channels, and 43xx and 308x mainframes sold to end users running internally developed CAD/CAM systems.
On January 21, 1986, IBM announced the IBM RT PC, which is the company's first technical workstation. Market reaction to the RT PC has been uncharacteristically weak in the CAD/CAM application areas due to limited software availability and sub-par floating-point and networking performance. Dataquest expects IBM to upgrade the RT PC's performance during the third quarter of 1986, which should bring the machine more in line with competitive workstation offerings.
IBM also began unveiling its EDA strategy earlier this year with the announcement of a new line of products called the Computer Integrated Electrical Design Series (CIEDS). These products are based primarily on software products from Silvar-Lisco.
Intergraph
Intergraph grew 30 percent in 1985, a product transition year for the company. Intergraph made great strides in the mechanical CAD/CAM application segment in 1985, which grew 57 percent over 1984.
The company recently reorganized its sales force into three divisions that address vertical opportunities in manufacturing, AEC, and mapping exploration. A lackluster first quarter of 1986 was widely expected as a result of this reorganization; however, the company reported very encouraging results with a 35 percent increase in sales and a 29 percent increase in profit over the same f^riod; in 1985.
Computervision
In 1985, it became apparent that Computervision's product line was too broad for the average salesperson to understand, much less support. The company fully recognizes this and has been refocusing most of its resources behind the recently announced CADDStation products based on the company's popular C/UDD4X mechanical CAD/CAM software and the Sun Microsystem engineering workstation. Initial market reaction to the new CADDStation products has been very strong. Dataquest expects the hemorrhaging that Computervision has been experiencing in its installed base will subside as a result of the new CADDStation products.
1.1-6 © 1986 Dataquest Incorporated July CCIS Markets
1.1 Industry Overview
Calma
Caima also had a tough 1985, although it made some impressive gains in the AEC industry. Calma is continuing to invest heavily in research and development bouyed by an $80 million dollar cash infusion from its parent, General Electric.
McDonnell Douglas
McDonnell Douglas is one of the fastest growing CAD/CAD companies in the industry, growing over 63 percent in 1985. Although its primary business remains in the mechanical CAD/C/^M application segment, the company has made tremendous inroads in the AEC business with its recent acquisition of Applied Research of Cambridge. The company has also taken some business away from Intergraph by teaming up with Synercom in the Civil Engineering CAD areas.
Perhaps the company's greatest strength is its strong computer integrated manufacturing (CIM) image. Dataquest believes that having a strong CIM market perception will be a key factor in future CAD/CAM sales.
Applicon
In 1985, Applicon underwent a year of transition and reorganization. The company merged with a sister Schlumberger company called Manufacturing Data Systems Incorporated (MDSI) and moved its corporate headquarters from Burlington, Massachusetts, to Ann Arbor, Michigan.
The company recently introduced BRAVO HI, its core mechanical CAD/CAM software on the Sun and Digital Equipment workstations. It has also unveiled a new high-performance color graphics display that has a resolution of 1,600 by 1,400 pixels.
Prime Computer
Prime grew 33 percent in 1985, showing revenue of $140 million in CAD/CAM. The company now has full control of the Medusa software and has assembled a very strong management and development team to guide the future of its CAD/CAM products. Dataquest believes that later this year, Prime will unveil a new RISC technology workstation that is based on the MIPS computer and Silicon Graphics terminals.
Mentor Graphics
Mentor experienced difficult third and fourth quarters last year as the market was reacting to personal computers and waiting for IBM's new workstation. In spite of this, the company grew a very respectable 56 percent. Dataquest believes that Mentor is off and running this year and should benefit from new products based on the Apollo DN3000 workstation series.
CCIS Markets © 1986 Dataquest Incorporated July 1.1-7
1.1 Industry Overview
Daisy Systems
Daisy Systems was one of the most profitable CAD/CAM companies in 1985. Today, however, the company is caught in a product transition from delivering proprietary computer systems to industry standard machines from Digital Equipment and IBM. Dataquest expects Daisy to begin shipping most of its applications on Digital Equipment and IBM hardware by the third quarter of this year.
Control Data
Control Data did a very quiet $116 million in CAD/CAM revenue in 1985. The company has a solid nucleus of CAD/CAM products aimed primarily at the meclianical market, and appears to have found a nice niche in delivering mainframe-based CAD/CAM products. The company also has a very large, loyal customer in Chrysler, which has standardized its CAD/CAM hardware on the CDC Cyber mainframes.
1-1-8 © 1986 Dataquest Incorporated July CCIS Markets
1.2 Application Overview
Figure 1.2-1 and Tables 1.2-1 and 1.2-2 illustrate the expected shift by application for CAD/C/yVI revenue and units from 1985 through 1990. We anticipate that the mechanical market will continue to remain the largest application, accounting for 54 percent of CAD/CAM revenue through 1990. The electronic CAD/C/^M applications (EDA, IC, and PCB combined) will grow slightly faster than the market as a whole, capturing 25 percent of the market in 1990.
MECHANICAL MARKET
The mechanical CAD/CAM market, which is the oldest and largest application segment, accounted for more than 55 percent of total CAD/CAM revenue in 1985. Dataquest believes that the mechanical segment will continue to be the dominant application through 1990, reaching more than $6.8 billion in revenue.
Below are the key factors that we believe will affect the mechanical CAD/CAM application segment:
• Solids modeling is fast becoming a mainstream requirement whose acceptance has been accelerated by the availability of low-cost, high-performance, technical workstations.
• The MCAE market is expected be a major market opportunity helping to drive the sale of large-scale CAD/CAM systems.
• The ability to perform CIM tasks or integrate into a CIM environment will be a key success factor for vendors selling mechanical CAD/CAM systems.
AEC MARKET
The 1985 AEC market continued to be dominated by Intergraph on the high erid, and by personal computer-based CAD suppliers such as Autodesk on the low end. Total 1985 revenue was $746 million, up 34 percent over 1984 revenue of $554 million. With respect to the AEC market, Dataquest offers the following observations:
• Personal computer-based systems will continue to dominate unit sales in the AEC application segment.
• Intergraph continues to dominate the AEC segment, capturing almost one-third of the market.
• The slowdown in U.S. commercial building activity is expected to have a major adverse effect on CAD sales in the architectural market segment.
• Capital spending cutbacks in the oil and oil-related industries are expected to adversely affect sales of CAD systems.
CCIS Markets © 1986 Dataquest Incorporated July 1.2-1
1.2 AppIication Overview
MAPPING MARKET
The mapping market is the smallest CAD/CAM application segment. Many of the CAD/CAM vendors that helped pioneer this area have ignored it in recent years, due largely to their inability to satisfy the need for more intelligent mapmaking tools. In 1985, two vendors, Intergraph and Synercom, dominated this market segment with a combined 69 percent market share. Dataquest forecasts that mapping will grow at a compound annual rate of 27 percent through 1990, reaching $720 million in worldwide revenue.
Other important points with respect to the mapping market are as follows:
• Unlike other CAD/CAM applications, mapping systems are almost entirely host-based systems. Due to the large data base requirements of this application, we expect host-dependent systems to continue to dominate, although we believe that standalone devices will play a greater role as front-end graphics devices.
• Intergraph's dominance in mapping is due primarily to its large installed base in the utility and municipal industry segments.
EDA MARKET
In 1985, the EDA market was the fastest-growing CAD/CAM application segment, growing over 92 percent in revenue from $276 million in 1984 to $531 million in 1985. Mentor, Daisy, and Valid continued to set the pace for this dynamic market, capturing 24, 20, and 9 percent market share, respectively. Dataquest believes that in 1986, the EDA market growth will slow significantly to 19 percent growth overall. A good deal of this growth is expected to come from new EDA market participants such as IBM, Hewlett-Packard, and Tektronix.
Other observations that Dataquest believes are important with respect to the EDA market segment are as follows:
• The ability to interface and integrate computer-aided testing activities with EDA systems is becoming increasingly important in purchasing decisions.
• A key success barometer for vendors in the EDA market segment will be the ability to capture repeat purchase business. Dataquest believes that repeat purchases will outpace new purchases by at least a 2-to-l margin.
• Products that allow end-to-end EDA integration with many disparate types of software and hardware will be more marketable than systems with closed architectures.
1.2-2 © 1986 Dataquest Incorporated July CCIS Markets
1.2 Application Overview
IC MARKET
The IC CAD market accounted for 1985 revenue of $198 million, which represented a 26 percent increase over 1984 revenue. Dataquest believes that the underlying technology in the IC CAD market is changing from handcrafted, full-custom tools toward cell-based place-and-route systems along with silicon compilers.
Dataquest identifies the specific trends in IC CAD as follows:
• By 1990, silicon compilers are expected to capture 47 percent of the IC CAD market, while automated place-and-route systems are expected to capture 43 percent; this leaves 10 percent for handcrafted systems.
• Tighter coupling of IC CAD systems with EDA and test functions is expected to continue.
PCB MARKET
The PCB market grew 34 percent in 1985, reaching $477 million in revenue. Dataquest expects the PCB market to grow at an average of 17 percent per year through 1990, reaching a market size of more than $1 billion in revenue. We foresee the following factors as playing key roles in this growth opportunity:
• The shorter product life cycles coupled with the global imperative to become more productive wiil continue to drive end-user demand for PCB CAD products.
• Application accelerators will play a larger role in future PCB CAD systems.
CCIS Markets © 1986 Dataquest Incorporated July 1.2-3
1.2 Application Overview
Figure 1.2-1
Total CAD/CAM Market Revenue by Application
1985
1990
ly/lechanical
EZD AEG
I I Mapping
10
PCB m
Source: Dataquest June 1986
1.2-4 1986 Dataquest Incorporated July CCIS Markets
•
1.2 Application Overview
Table 1.2-1
Total CAD/CAM Market by Application (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market Revenue
Systems Workstations
Mechanical Revenue Systems
Workstations
AEG Revenue
Systems Workstations
Mapping
Revenue
Systems Workstations
EDA Revenue
Systems Workstations
IC
Revenue
Systems
Workstations
PCS Revenue
Systems
Workstations
4,849
65,212 82,056
2,677
29,632
40,635
746 15,466 18,514
220 432
1,752
531 14,036 14,068
198 1,196
1,419
477 4,449
5,668
5,863 88,769
107,051
3,266 42,232
53,568
896 16,977 20,712
288 2.153
3,866
632 18,705 18,733
230 1,753
1,950
552 6,949
8,221
7,116
118,891
139,497
3,952 59,457 71,909
1,075 20,774 25,201
375 3,276
5,714
764 22,785 22,817
292 2,723
2,881
659 9,P76
10,975
8,624
157,873 180,471
4,742 83,537
96,607
1,296
25,352 30,486
476 3,661
7,001
940 27,767
27,803
392 4,164
4,280
778 13,392
14,294
10,397 211,532 234,056
5,664
118,473 130,282
1,559
30,933 36,465
590 4,083
8,425
1,138
34,287
34,320
543 6,121 6,197
902 17,634
18,367
12,511
283,682 304,055
6,760 167,133
176,265
1,876
37,096 42,525
720 4,527
9,762
1,354
42,873
42,895
762 8,903 8,945
1,038 23,150
23,663
Source:
20.9X
34.2% 29.9X
20.4X 41.3X 34.1%
20.2% 19.1% 18.1%
26.7%
60.0%
41.0%
20.6%
25.0% 25.0%
30.9X 49.4%
44.5%
16.8%
39.1%
33.1%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.2-5
1.2 Application Overview
Table 1.2-2
Total CAD/CAM Market by Application (Percent of Total)
1985 1986 1987 1988 1989 1990
Mechanical Revenue
Systems Workstations
AEC Revenue
Systems Workstations
Mapping
Revenue
Systems Workstations
EDA Revenue Systems
Workstations
10 Revenue
Systems
Workstations
PCB Revenue Systems
Workstations
55X 4SX SOX
15% 24X 23X
5X IX 2X
11X 22X 17X
4X 2X 2X
10X 7% 7%
56X 48X SOX
15X 19X 19X
SX 2X 4X
11X 21X 17X
4X 2X 2X
9X 8X 8X
56X SOX S2X
1SX 17X 18X
SX 3X 4X
11X 19X 16X
4X 2X 2X
9X 8X 8X
55X 53X 54X
1SX 16X 17X
6X 2X 4X
11X 18X 15X
SX 3X 2X
9X 8X 8X
54X 56X S6X
1SX 1SX 16X
6X 2X 4X
11X 16X 1SX
SX 3X 3X
9X 8X 8X
SAX 59X S8X
15X 13X 14X
6X 2X 3X
11X 15X 14X
6X 3X 3X
ex ax 8X
Source: Dataquest
June 1986
•
1.2-6 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Figure 1.3-1 and Tables 1.3-1 and 1.3-2 illustrate the regionalized revenue forecast for the CAD/CAM market. We predict very little change in the relative percentages of the CAD/CAM market with respect to geographic distribution. We expect North America to continue to capture the lion's share of the market with more than 55 percent share through 1990. In addition, we offer the following points regarding the geographic distribution of the CAD/CAM marketplace:
• We believe that North America will grow slightly faster than the world as a whole, given our bullish long-term outlook for the U.S. economy.
• The U.S. CAD/CAM industry is one of the few areas of high technology that is not threatened by foreign competition. In fact, the reverse is true. Greater than 80 percent of revenue in the 1985 Japanese CAD/CAM market was derived from U.S.-based C/UD/CAM products.
• The overseas markets are beginning to see a greater level of competition from local suppliers.
EUROPEAN MARKET
This section discusses the European CAD/CAM Market. The market numbers in this section differ from those presented in the forecast model because we have included the OEM and value-added revenue of European distributors selling U.S.-based systems.
European Market Revenue
The European CAD/CAM market grew 55 percent in 1985, reaching $1,164 billion in revenue as illustrated in Figure 1.3-2 Revenue and Table 1.3-3. Dataquest believes that the European market was outdistanced only by the Far Eastern CAD/CAM market, which grew 62 percent in 1985. Dataquest expects the European market to grow 21 percent in 1986, reaching over $1.4 billion in revenue. We are forecasting a 21 percent compound annual growth rate through 1990, which translates to nearly $3 billion in CAD/CAM revenue in 1990.
European Workstation Shipments
Figure 1.3-2 Shipments illustrates expected unit grovvth for CAD/CAM workstations sold in European markets. Dataquest forecasts that unit shipments will exceed 27,000 units in 1986, growing to 76,405 units by 1990.
CCIS Markets © 1986 Dataquest Incorporated July 1.3-1
1.3 Geographical Overview
European Market Share
Figure 1.3-3 and Table 1.3-4 list the European market share leaders. IBM continues to dominate the European CAD/CAM market followed by Computervision, Intergraph, Applicon, and Calma.
European Applications
Figure 1.3-4 and Tables 1.3-5 and 1.3-6 identify the European market by application. The European market is more heavily oriented toward mechanical CAD/CAM applications than the world market as a whole.
European Regions
Figure 1.3-5 and Table 1.3-7 illustrate 1985 European regional country splits for the sale of CAD/CAM equipment. Nearly three quarters of all European revenue is generated by West German, U.K., and French CAD/CAM manufacturers. Italy is the fastest-growing country in Europe for CAD/CAM products. Its CAD/CAM revenue grew 142 percent in 1985.
European Product Type
Figures 1.3-6 and 1.3-7 along with Tables 1.3-8 and 1.3-9 represent our forecast by product type for the European CAD/CAM market. Like other world markets, the transition from host-based to distributed workstations is well under way.
FAR EASTERN MARKET
This section discusses the Far Eastern CAD/CAM Market. The market numbers in this section differ from those presented in the forecast model because we have included the OEM and value-added revenue of Far Eastern distributors selling U.S.-based systems.
Far Eastern Market Revenue
The Far Eastern CAD/CAM market grew 62 percent in 1985, reaching $953 million in revenue as illustrated in Figure 1.3-8 Revenue and Table 1.3-10. We are forecasting much slower growth in the Far Eastern market (21 percent) in 1986, due primarily to the strength of the Japanese yen as compared with other world currencies. Dataquest estimates that the Far Eastern market will grow at a compound annual growth rate of 21 percent, reaching $2.4 billion in revenue by 1990.
1-3-2 © 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Far Eastern Workstation Shipments
Figure 1.3-8 Shipments illustrates expected unit growth for CAD/CAM workstations sold in Far Eastern markets. Dataquest forecasts that unit shipments will exceed 21,000 units in 1986, growing to 58,599 units by 1990.
Far Eastern Market Share
Figure 1.3-9 and Table 1.3-11 list the Far Eastern market share leaders. IBM continues to dominate the Far Eastern C/UD/CAM market followed by Fujitsu, Hitachi, Mitsubishi Electric, and NEC. Unlike other CAD/CAM market regions, the Far Eastern market is driven by computer companies. Seven of the top ten Far Eastern CAD/CAM vendors are also computer manufacturers.
Far Eastern Applications
Figure 1.3-10 and Tables 1.3-12 and 1.3-13 identify the Far Eastern market by application. Like other world markets, the Far Eastern CAD/CAM market is dominated by mechanical applications. Dataquest does not expect any major shift in the Far Eastern application mix, although EDA applications are expected to grow slightly faster than the market as a whole.
Far Eastern Regions
With respect to market size, we believe that Japan represents more than 80 percent of the revenue derived from the sale of CAD/CAM systems in the Far East. The other Far Eastern regions (Korea, Taiwan, Singapore, Hong Kong, and the Peoples' Republic of China) are just beginning to employ automated design and manufacturing methods and are somewhat limited in terms of market potential due to their early stage of industrial evolution. We expect that the non-Japanese areas' contributions to the Far Eastern revenue base will increase proportionally as their level of industrialization increases through this century.
Far Eastern Product Type
Figures 1.3-11 and 1.3-12 along with Tables 1.3-14 and 1.3-15 represent our forecast by product type for the Far Eastern CAD/C/VM market. Like other world markets, the Far Eastern market is experiencing rapid growth in distributed workstations, especially personal computers.
CCIS Markets © 1986 Dataquest Incorporated July 1.3-3
1.3 Geographical Overview
Figure 1.3-1
Total CAD/CAM Market Revenue by Region
1985
1990
1%
North America
Europe
J Far east
i ROW
2%
Source: Dataquest June 1986
1.3-4 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Table 1.3-1
Total CAD/CAM Market by Region (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Marlcet
Revenue
Systems Workstations
North America
Revenue Systems
Workstations
Europe Revenue
Systems
Workstations
Far East Revenue
Systems
Workstations
Rest of World
Revenue
Systems
Workstations
4,849
65,212
82,056
2,648
36,788 43,905
1,164
19.547
23,663
953 8,262
13,521
84 615 967
5,863 88,769
107,051
3,201
47,510 57,239
1,410
22,749
27,103
1,150
17,370
21.158
102 1,141
1,551
7,116
118,891
139.497
3,887
63.500 74.840
1,711
31,093
35,928
1.394
22,488
26.430
125 1.810
2,298
8,624
157,873 180,471
4,720
83,269
96,203
2,070
41.481 46.644
1.683
30.475
34.421
152 2.647
3.203
10.397
211.532 234,056
5,701 112.282
125.538
2.490
54.552 59.585
2,022
41.085
44,724
184 3,612
4,209
12,511 283.682
304.055
6.872
151.129 163,688
2,991
72.123
76.405
2.426
55.689
58.599
222 4.741
5,363
Source:
20.9X 34.2X
29.9X
21.0% 32.7% 30.1%
20.8% 29.8%
26.4%
20.5%
46.5%
34.1%
21.4%
50.5%
40.9%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-5
1.3 Geographical Overview
Table 1.3-2
Total CAD/CAM Market by Region (Percent of Total)
1985 1986 1987 1988 1989 1990
North America Revenue Systems
Workstations
Europe
Revenue
Systems
Workstations
Far East
Revenue
Systems
Workstations
Rest of World
Revenue
Systems Workstations
55% 56X 54%
24X 30% 29X
20X 13X 16X
2X IX IX
55X 54% 53X
24% 26X 25X
20X 20X 20X
2X IX 1X
55X 53X 54X
24X 26X 26X
20X 19X 19X
2X 2X 2X
55X 53X 53%
24X 26X 26X
20X 19X 19X
2X 2X 2X
55X 53X 54X
24X 26X 25X
19% 19X 19X
2X 2X 2X
55% 53X 54X
24X 25X 2SX
19X 20% 19X
2X 2X 2X
Source: Dataquest
June 1986
•
1.3-6 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Figure 1.3-2 Revenue
European CAD/CAM Market
Millions of Dollars
2800-1
2400
2000-
1600
1200-i
800
400
1985 1986 1987 1988 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-7
1.3 Geographical Overview
Table 1.3-3
European CAD/CAM Market (Millions of Dollars/Actual Units)
Revenue Systems Workstations
198S aessitts
1,164 19,547 23,663
1986 •atsaadt
1,410 22,749 27,103
1987 s==s=
1,711 31,093 35,928
1988 ===== 2,070
41,481 46,644
1989 =3=as
2,490 54,552 59,585
1990 CA6li ===== B:I I I±S
2,991 21X 72,123 SOX 76,405 26%
Source: Detaquest June 1986
#
•
1.3-8 © 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Figure 1.3-2 Shipments
European CAD/CAM Market
Workstation Shipments 60000
72000
64000
56000-
48000 -
40000
32000
24000
16000-
8000
1985 1986 1987 1983 1989 1990
Source: Dataquest June 1986
#
CCIS Markets 1986 Dataquest Incorporated July 1.3-9
1.3 Geographical Overview
Figure 1.3-3
European CAD/CAM Market Shares 1985
Prime 2.4%
Matra Datavlslon ? ^ t y 2.4% 2.4%
Mentor 2.6%
Racai-Redac 2.8%
Source: Dataquest June 1986
1.3-10 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Table 1.3-4
European CAD/CAM Market Shares—1985
IBM
CoInputervision Intergraph Applicon
CIS
Cat ma Matra Datavision Racal-Redac
Mentor McAuto
PriIne
Daisy
Pafec
Ferranti Infographics Control Data
Valid Logic
MDSI
Siemens
Silvar-Lisco
Robo Systems Syscan
EXAPT Auto-Trol
Catay Germany Olivetti
Hewlett-Packard
Scientific Calculations
Autodesk
Marconi-CAE
Futurenet Skok
Synercom
SDRC Holguin
Gerber Systems Cimlinc
Gerber Scientific
Bruning Cad
Tektronix Telesis Other Europe
All Companies
Revenue
198 110
92 50
40 39
36
35 31
28
28 27
24 24
22
20
20
19
17 16
15
13
12
11 11
11
8
7
6
6
6
6
4
3
2
2
161
1,164
share
17% 9%
8% 4%
3% 3%
3%
3% 3%
2%
2% 2%
2%
2% 2%
2%
2%
2%
1% 1%
1%
1% 1%
1%
1%
1%
1%
1% 1%
0%
0%
0%
0%
0%
0%
0%
0% 0%
0% 0% 14%
100%
urce: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-11
1.3 Geographical Overview
Figure 1.3-4
European CAD/CAM Market Revenue by Application
1985
1990
Mechanical
^ a AEC
Mapping
EDA
10
i i i l PCB
Source: Dataquest June 1986
1.3-12 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
# Table 1.3-5
European CAD/CAM Market by Application (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
•
All Applications
Revenue
Systems Workstations
Mechanical
Revenue
Systems Uorlcstations
AEG Revenue
Systems Workstations
Mapping Revenue
Systems Workstations
EDA Revenue
Systems
Workstations
IC
Revenue Systems
Workstations
PCS Revenue
Systems
Workstations
=a==s
1.164
19,547 23,663
713 11,107
14,300
144 4,475
5,063
47 182 372
106 2,424
2,422
37 213 237
116 1,146
1,271
1,410
22,749 27,103
871 12,510
15.456
173 4,067 4,776
62 767
1,097
126 3,241
3,245
43 345 381
135 1,819
2,149
=====
1,711
31.093 35,928
1,054
18,536 21.605
208 4.834 5,734
81 864
1,351
153 3.906
3.912
54 534 562
161 2.420
2.765
=====
2.070
41.481
46,644
1,265
25.978 29.039
250 5,670
6.744
103 970
1.632
188 4.900 4,907
73 797 821
190 3,167
3,502
=====
2,490
54,552
59,585
1,512
35.172 37.956
301 6,679 7,791
127 1,170
1,986
228 6,212
6,218
102 1,155
1,173
220 4,165
4.461
=S===
2,991
72,123
76,405
1,805 47,831
50,045
363 7,769
8,702
156 1,341
2,251
271 7,985
7.987
143 1.665
1.677
254 5.532
5.743
Source:
=====
21% 30% 26%
20% 34% 28%
20% 12% 11%
27% 49% 43%
21% 27% 27%
31% 51% 48%
17% 37% 35%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-13
1.3 Geographical Overview
Table 1.3-6
European CAD/CAM Market by Application (Percent of Total)
1985 1986 1987 1988 1989 1990
Mechanical Revenue Systems Workstations
AEC
Revenue
Systems
Workstations
Mapping
Revenue
SysteIns Workstations
EDA Revenue Systems Workstations
IC Revenue
SysteIns Workstations
PCB Revenue
Systems
Workstations
61%
57%
60%
12%
23% 21%
4%
1%
0%
9%
12%
10%
3%
1%
1%
10%
6%
5%
• '
62%
55%
57%
12%
18% 18%
4%
3%
1%
9%
14%
12%
3%
2%
1%
10%
8%
8%
62% 60%
60%
12%
16%
16%
5%
3%
3%
9% 13%
11%
3%
2%
2%
9% 8%
8%
61%
63%
62%
12%
14%
14%
5%
2%
3%
9%
12% 11%
4%
2%
2%
9%
8%
8%
61%
64%
64%
12%
12%
13%
5%
2%
3%
9%
11%
10%
4%
2%
2%
9%
8%
7%
60%
66%
65%
12%
11% 11%
5%
2%
3%
9%
11%
10%
5%
2%
2%
8%
8%
8%
Source: Dataquest
June 1986
1.3-14 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Figure 1.3-5
European CAD/CAM Market Revenue by Region 1985
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-15
1.3 Geographical Overview
Table 1.3-7
European CAD/CAM Market by Region (Millions of Dollars/Actual Units)
All Europe
Revenue
Systems
Workstations
United Kingdom
Revenue
Systems
Workstations
France
Revenue
Systems
Workstations
Germany
Revenue
Systems
Workstations
Italy
Revenue
Systems
Workstations
Bennelux Countries
Revenue
Systems
Workstations
Scandanavia
Revenue
Systems
Workstations
Rest of Europe
Revenue
Systems
workstations
All
===
1,164
19,701
23,663
252 5,534
13,102
229 4,016
6,026
378 5,654
7,137
88 1,303
2,079
78 1,302
1,911
111 1,529
2.400
28 363 472
Mechanical
==========
713 11,206
14,300
143 3,067
1,802
144 2.298
3,709
235 3.129
4,333
56 864
1,434
48 760
1.190
70 906
1,518
17 181 314
AEC ===
144 4,480
5,063
35 1,718
4,351
27 805
1,161
45 1,177
1,391
11 210 342
9 267 360
14 251 393
2 50 41
Mapping EDA IC PCB
47 203 372
8 36 806
5 40 87
16 63 100
7 19 23
3 16 30
7 25 51
1 3 4
106 2,436
2,422
26 553
3,461
23 558 615
34 817 782
7 142 122
6 140 168
•7 152 189
3 73 53
37 225 237
10 60
2,484
8 42 47
10 62 74
3 19 19
3 16 IS
3 17 16
1 9 9
Source:
116 1,152
1,271
31 302
1,569
22 235 324
38 362 397
4 27 41
8 83 105
10 '
114 136
3 29 19
Dataquest
June 1986
1.3-16 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Figure 1.3-6
European CAD/CAM Market Revenue by Product Type
Millions of Dollars
2400-
2100-
1800-
1500-
1200-
900-
600-
300-
0 -
• • A
f
Standalone
Host-Dependent
Personal Computer
p 1
- - i
1
^
i
1985 1986 1987 19B8 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-17
1.3 Geographical Overview
Figure 1.3-7
European CAD/CAM Market Shipments by Product Type
Workstation Shipments
54000 -~
48000 -
42000.
36000*
30000
24000
18000-
120O0
6000
• Standalone
• Host-Dependent
A Personal Computer
1985 1986 1987 1988 1989 1990
Source: Dataquest June 1986
1.3-18 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Table 1.3-8
European CAD/CAM Market by Product Type (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types
Revenue Systems Workstations
Standalone
Revenue
Systems Workstations
Host-Dependent
Revenue Systems
Workstations
Personal Computer
Revenue
Systems
Workstations
1,164 19,547
23.663
242 2,645
2,645
788 1,256
5,372
134 15,646
15,646
1,410 22,749
27,103
416 5,605
5,605
790 1,428
5,783
204 15,716
15,716
1,711 31,093 35,928
673 10,437
10,437
750 1,446
6,281
288 19,210
19,210
2,070 41,481
46,644
1,059 18,941
18,941
689 1,397
6,560
321 21,143
21,143
2,490 54,552
59,585
1,577
32,197
32,197
594 1,214
6,247
320 21,141
21,141
2,991 72,123 76,405
2,224
51,116
51,116
467 896
5,179
300 20,110
20,110
Source:
21% 30% 26%
56% 81% 81%
-10%
-7% -1%
17% 5% 5%
Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-19
1.3 Geographical Overview
Table 1.3-9
European CAD/CAM Market by Product Type (Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone
Revenue
Systems
Workstations
Host-Dependent
Revenue
Systems
Workstations
P^ersonat Computer
Revenue
Systems
Workstations
21% 14% 11%
68% 6% 23%
12% 80% 66%
30% 25% 21%
56% 6% 21%
14% 69% 58%
39% 34% 29%
44% 5% 17%
17% 62% 53X
51% 46% 41%
33% 3% 14%
1^ 51% 45%
63% 59% 54%
24% 2% 10%
13% 39% 35%
74% 71% 67%
\6X 1% 7%
10% 28% 26%
Source: Dataquest June 1986
l'.3-20 © 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
# Figure 1.3-8 Revenue
Far Eastern CAD/CAM Market
Millions of Dollars
2400
2100-
1800
1500
1200
900
600
300-
^ ^ ^ ^ \^
i^S^N
% ^ ^
k W - ^ ^
fc^^^ 'V\%>,>,
S$$; kXVV^/^ 1.x X-y
1985 19S6 1987 1988 1989 1ftSt>
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-21
1.3 Geographical Overview
Table 1.3-10
Far Eastern CAI>/CAM Market (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CACR
Revenue 953 1,150 1,394 1 ,683 2.022 2,426 21%
Systems 8,262 17,370 22,488 30,475 41,085 55,689 46%
Workstations 13,521 21,158 26,430 34,421 44,724 58,599 34%
Source: DATAQUEST
June 1986
•
1.3-22 © 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
• Figure 1.3-8 Shipments
Far Eastern CAD/CAM Market
Workstation Shipments
60000-r
54000
48000
42000
36000
30000
24000
18000
12000
6000
W'^Si 'SSSS> '^V^^i,""''^
§ ^ •',, \ \ v''',
tC^iW.
•X^S C', Vw.-
XsS'C-' 'lA.Xxx
vSM^ ii
1985 1986 1987 1988 1989 1990
Source: Dataquest June 19S6
CCIS Markets © 1986 Dataquest Incorporated July 1.3-23
1.3 Geographical Overview
Figure 1.3-9
Far Eastern CAD/CAM Market Shares 1985
Nippon Unlvao Kaisha 2.9%
Computervlslon 4.5%
Source: pataquest June 1986
1.3-24 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Table 1.3-11
Far Eastern CAD/CAM Market Shares—1985
Revenue Share
IBM Fuj t tSU
Hitachi
Mitsubishi Electric
NEC Computervision
Toshiba
Nippon Univac Kaisha
Seiko I&E
Zuken
Mentor
Hitachi Zosen
Scientific Calculations
Mutoh Industries
Sharp System Products
Fuji Xerox
Ashi Optical
Daisy
McAuto
Applicon
Toyoelectric Manufacturing
Valid
Hitachiseiko
Design Automation
Hewlett-Packard
Univac Information Systems
Calma
Uctaida Yoko
Prime
Wacom
Technodia
Control Data
Mitsui Engineering
Yokogawa Hokushin Electric
Century Research Center
AIda Engineering
Graphtec
Otsukashokai
Silvar-Lisco
Toyo Information Systems
Quuat (Shukosha)
liacal-Redac
Gerber Systems
Sumitomo Electric Industries
Hakuto
Other
Total
182 84 71 57 55 43 38 27 27 23 21 19 18
16 16
15 14
13 11
11 11
10 9
8 8
7
7 7
7
7
6
6 6
6
5 4
4
4
4 4
3
3
2 2
2 47
953
Source: 1
19.n
8.8X 7.5X 6.OX 5.8X 4.5X 4.OX 2.9X
2.9X
2.4X
2.2X
2.OX
1.9X
1.7X
1.7X
1.5X
1.5X
1.4X
1.1X
1.1X
1.1X
1.1X
.9X
.9X
.8X
.8X
.8X
.7X
.7X
.7X
.7X
.7X
.7X
.6%
.5X
.4X
.4X
.4X
.4X
.4X
.4X
.4X
.2X
.2X
.2X
4.9X
100.OX
}ataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-25
1.3 Geographical Overview
Figure 1.3-10
Far Eastern CAD/CAM Market Revenue by Application
1990
IVIechanical
K • \ AEC
1 I Mapping
^ 10
PCB 1 ^
Source: Dataquest June 1986
1.3-26 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Table 1.3-12
Far Eastern CAD/CAM Market by Application (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
All Applications
Revenue Systems Worlcstations
Mechanical
Revenue
Systems Workstations
AEC Revenue
Systems
Worlcstations
Mapping
Revenue
Systems Worlcstations
EDA Revenue
Systems Workstations-
IC Revenue
Systems
Workstations
PCB Revenue
Systems
Workstations
=====
953 8,262 13,521
589 4,771
8,411
109 1,403
1,995
18 37 162
66 916 953
35 158 267
136 977
1.733
=====
1,150 17,370 21,158
719 10,366
12,910
131 2,579
3,242
24 79 234
79 2,319
2,320
41 251 298
158 1,777
2.154
=====
1,394
22,488 26,430
870 12,879 15,774
157 3,248
3,845
31 206 373
95 2,897 2,899
51 478 502
189 2,780
3,037
=====
1.683
30,475 34,421
1,044
17,962 20,980
189 3.811 4,425
40 445 573
117 3,577 3,579
69 738 750
223 3,942
4,113
=====
2,022 41,085 44,724
1,248 25,447
28,205
228 4,323
4,958
49 593 681
142 4,449 4,451
96 1,085 1,091
259 5,186
5,339
=====
2,426
55,689
58,599
1,490
36,001 38,172
275 5,003
5,598
60 701 750
169 5,612 5,613
135 1,579
1,583
298 6,793
6,884
Source:
=====
21% 46% 34%
20% 50% 35%
20% 29% 23%
27% 80% 36%
21% 44% '43%
31% 59% 43%
17% 47% 32%
Dataquest
June 1986
CCIS Markets © 1986 Dataquest Incorporated July 1.3-27
1.3 Geographical Overview
Table 1.3-13
Far Eastern CAD/CAM Market by Application (Percent of Total)
1985 1986 1987 1988 1989 1990
Mechanical
Revenue
Systems
Uorlcstations
AEC
Revenue
Systems
Workstations
Mapping
Revenue
Systems
Worlcstations
EDA Revenue Systems Worlcstations
IC Revenue
Systems
Workstations
PCS Revenue
Systems
Workstations
62%
58%
62%
11% 17%
15%
2%
0%
0%
7%
11%
7%
4%
2%
2%
14%
12%
13%
62%
60%
61%
11%
15%
15%
2% 0%
1%
7%
13%
11%
4%
1%
1%
14%
10%
10%
62%
57%
60%
11%
14%
15%
2% 1%
1%
7%
13%
11%
4%
2%
2%
14%
12% 11%
62% 59%
61%
11% 13%
13%
2% 1%
1%
7%
12% 10%
4%
2%
2%
13% 13%
12%
62%
62%
63%
11% 11%
11%
2%
1%
1%
7%
11%
10%
5%
3%
2%
13%
13%
12%
61%
65%
65%
11% 9%
10%
2%
1%
1%
7% • 10%
10%
6%
3%
3%
12% 12%
12%
Source: Dataquest
June 1986
1.3-28 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Figure 1.3-11
Far Eastern CAD/CAM Market Revenue by Product Type
Millions of Dollars
/lUUU -
1800-
1600-
1400-
1200-
1000-
800-
i
600-
400-
200-
1
0 -
• •
>
f - " " ^
Standalone Host-Dependent Personal Computer
* ~ ~ — — — ^
*
1
A
1
A
1
A
1985 1986 1987 198S 1939 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-29
1.3 Geographical Overview
Figure 1.3-12
Far Eastern CAD/CAM Market Shipments by Product Type
Worl<statlon Shipments 50000-
45000
40000
35000
30000
25000
20000
15000-
10000-
5000
Standalone
Host-Dependent
Personal Computer
1985 1986 1987 1988 1989 1990
Source: Dataquest June 198£
1.3-30 1986 Dataquest Incorporated July CCIS Markets
1.3 Geographical Overview
Table 1 .3-14
Far Eastern CAD/CAM Market by Product Type (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types
Revenue Systems
Workstations
Standalone
Revenue
Systems Workstations
Host-Dependent
Revenue Systems
Workstations
Personal Computer
Revenue
SysteIns
Workstations
953 8,262
13,521
128
1,270 1,270
691
1,487
6.746
134 5,504
5,504
1,150
17,370 21,158
303
4,078
4,078
688
1,275 5,063
160 12,017
12,017
1,394
22,488 26,430
576
8,736
8,736
625
1,211
5,153
192 12,541
12,541
1,683 30,475
34,421
929 16,159
16,159
550 1,108
5,053
204
13,209
13,209
2,022
41,085 44.724
1,365
27,263
27,263
457
926 4.566
200
12,896
12,896
2.426 55.689 58,599
1,898
42.987
42.987
344
652
3,561
185 12.050
12.050
Source:
21% 46%
34%
71%
102%
102%
-13%
-15%
-12%
7%
17%
17%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.3-31
1.3 Geographical Overview
Table 1.3-15
Far Eastern CAD/CAM Market by Product Type (Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone Revenue SysteIns Uorlcstatfons
Host-Dependent Revenue Systems Workstations
Personal Computer Revenue SysteIns Workstations
13% 15%
9%
73%
18%
50%
14% 67%
41%
26% 23% 19%
60%
7% 24%
14%
69%
57%
41% 39% 33%
45% 5%
19%
14%
56% 47%
55% 53% 47%
33% 4%
15%
12%
43% 38%
68% 66%
61%
23% 2%
10%
10%
31% 29%
78% 77%
73%
14% 1%
6%
8%
22% 21%
Source: Dataquest
June 1986
1 3 - 3 2 © 1986 Dataquest Incorporated July CCIS Markets
1.4 Product Type Overview
This section refers to Figures 1.4-1 Revenue, 1.4-1 Shipments, 1.4-2, and 1.4-3, and Tables 1.4-1, 1.4-2, and 1.4-3.
Over the past three years, the CAD/CAM industry has changed from shared-logic, host-based systems to distributed engineering workstations and personal computers. This major transition has been smooth for some vendors but rocky for others, depending upon the vendor's level of commitment toward adopting a truly distributed product platform and whether or not the vendor was leading or following this trend. Dataquest believes that seven out of every ten CAD/CAM workstations sold today are distributed-type products. We expect that this ratio will grow to more than nine out of ten workstations by 1990.
The personal computer, more specifically the IBM PC AT, has forever altered the shape of the CAD/CAM industry by bringing the cost of a relatively powerful workstation down to a level where the masses can enjoy some of the major benefits of CAD/CAM. We predict, however, that the major CAD/CAM system architecture of the future will be a combination of the personal computer and the standalone engineering workstation that we call the personal workstation. The personal workstation will contain the following system features:
• UNIX virtual memory operating system
• Ability to run MS-DOS programs
. • Integrated bit-mapped graphics with 1-megapixel display
• Local area network connection (e.g., Ethernet, IBM Token-Ring)
• Communication gateways (e.g., MAP, 3270, ASCII terminal)
We offer the following observations regarding CAD/CAM systems architectures worldwide, including host-dependent, standalone, and personal computer systems:
• As prices continue to fall and the workstation becomes more of a commodity item, it will become increasingly difficult for the turnkey vendors to hide profit margins in bundled hardware/software configurations. We expect that a larger portion of revenue and profits will begin to be gained from the sales of software and services.
• Shared-logic, host-dependent systems are rapidly declining in popularity for use in interactive graphics applications. However, we see a major market forming for background computing and network servers.
• The use of application accelerators will increase as more discrete functions are moved from general-purpose software into application-specific VLSI.
CCIS Markets © 1986 Dataquest Incorporated July 1.4-1
1.4 Product Type Overview
COMPETITIVE EVALUATION
Measuring the technical merits of one workstation versus another is a very difficult task compounded by:
• The lack of consistent standards
• A phenomenon known as "vendor specsmanship," whereby the vendor publishes only those specifications that make its products look good and ignores those that do not
• The subjective nature of many features
• The effect that applications have on weighing the importance of one feature versus another
A particular case in point is the often-used millions of instructions per second (MIPS) specifications. With today's simpler computing architectures employing microprocessor technologies and reduced instruction sets (RISCs), the types of instructions that these computers are processing differ dramatically from their mainframe ancestors. For example, a RISC computer that boasts 2 MIPS in computing performance may produce only a fraction of that speed when running a particular application due to the complexity of the operating software. Vendors are also guilty of quoting MIPS ratings on instructions that operate the quickest (such as an integer add) instead of advertising ratings that indicate performance over an average range of instructions.
Discussing the implications of quantifying workstation performance is beyond the scope of this report. Dataquest believes, however, that workstation buyers generally evaluate four major technical categories when making workstation purchases:
• Computing
• Graphics
• Networking/interconnectivity
• Application software
Each of these categories carries with it a unique set of specifications that are weighted by their particular importance within a given application and/or environment. As Figure 1.4-2 illustrates, Dataquest believes that the two dominant environments emerging within the design automation community are for low-end 2-D and high-end 3-D workstations.
1.4-2 © 1986 Dataquest Incorporated July CCIS Markets
1.4 Product Type Overview
• Low-end systems typically contain the following features:
• 1 megapixel of display resolution
• Up to 16 colors
• 600 to 1,000 double-precision whetstone performance
• Execution and storage of MS-DOS programs
• Engineering documentation and data entry applications
High-end systems generally contain the following features:
• Greater than 1 megapixel of display resolution
• Greater than 256 colors
• High-performance graphic processors to perform near real-time viewing and shading functions
• 1,500 to 2,000 double-precision whetstone performance
• Engineering analysis and simulation applications
Low-End 2-D Environment
The low-end 2-D environment historically has been dominated by personal computers such as the IBM PC AT. Dataquest believes that the personal computer era in CAD/C/^M will level off dramatically and eventually give way to the more powerful, low-cost generation of engineering workstations that were recently introduced. Our reasoning behind this prediction stems from our survey of CAD/C/^M end users who suggested that 32-bit, virtual memory, engineering workstations are more desirable than personal computers. (See Dataquest's Research Newsletter number 84 entitled, "CAD/CAM End-User Survey.")
However, C/yD/CAM end users also stated that price was ultimately the most important factor when considering workstation purcliases, with $20,000 being an important economic target. Now that the new breed of workstations has crossed this critical price/performance barrier, Dataquest expects rapid expansion of this market segment. Our findings are further substantiated by some of the large, low-end workstation purchases recorded by General Motors' EDS, Hughes Aircraft, and Schlumberger. In each of these instances, the requirement for a 32-bit engineering workstation costing less than $20,000 was the principal purchasing criterion. None of these purchasers considered a personal computer because of its limited computing, graphics, and networking performance.
CCIS Markets © 1986 Dataquest Incorporated July 1.4-3
1.4 Product Type Overview
High-End 3-D Environment
The high-end 3-D workstation marketplace is driven by the need to push the interactivity of engineering applications such as solids modeling, PCB layout, and finite element modeling as close to real time as possible. While this segment of the market has experienced a high degree of user benchmark activity, Dataquest finds that high-end 3-D applications have had very little success within the end-user community due to the associated performance penalties. Dataquest believes that the new breed of high-end 3-D workstations that offer 1.5 to 2 times the performance of a VAX 11/780 at workstation prices will spawn a new awareness that 3-D capacity can in fact be accomplished productively. The software vendors have recognized this and have been converting their applications to take advantage of the 3-D display list capability of these new high-end workstations. This software conversion should allow 3-D applications to run much more efficiently by taking advantage of high-speed VLSI features on the 3-D machines and by eliminating a lot of the algorithmic gymnastics that take place when the software aione is left with the task of simulating the 3-D image.
AVERAGE PRICE PER SEAT
As illustrated in Table 1.4-3, Dataquest believes that the average price per seat ^ ^ of a turnkey system will drop 14 percent per year through 1990. This rate of decline ^ B is much slower than the 30 percent to 40 percent price declines the CAD/CAM ^ ^ market has witnessed during the past two years.
It is important to note that Dataquest expects workstation performance to continue to increase at a faster rate than the rate of price decline. Until now, CAD/CAM workstation computing performance doubled approximately every two years. For the balance of this decade, however, Dataquest predicts that workstation computing performance will double every single year. For example, 2 MIPS (miliions of instructions per second) computing performance is common in CAD/CAM workstations in 1986. In 1987, however, we expect computing performance to jump to 4 MIPS, with an expected rise to 8 MIPS in 1988.
1.4-4 © 1986 Dataquest Incorporated July CCIS Markets
1.4 Product Type Overview
Figure 1.4-1 Revenue
Total CAD/CAM Market by Product Type
Millions of Dollars 10000-
9000
8000
7000
6000-
5000-
4000
3000
2000-
1000
Standalone
Host-Dependent
Personal Computer
1985 1986 1987 WBB 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.4-5
1.4 Product Type Overview
Figure 1.4-1 Shipments
Total CAD/CAM Market by Product Type
Workstation Shipments
210000
180000
150000
120000
SOOOO
60000
30000
• Standalone
• Host-Dependent
A Personal Computer
1985 1986 1987 1988 1989 1S90
Source: Dataquest June 1986
l:.4-6 1986 Dataquest Incorporated July CCIS Markets
1.4 Product Type Overview
Figure 1.4-2
CAD/CAM Workstation Environment
Price
Low End 2D
High End 3D
Performance
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.4-7
1.4 Product Type Overview
Figure 1.4-3
T o t ^ CAD/CAM Market Average Price per Seat
Thousands of Dollars 140
120
100
Sff
«l9r
20jb
• , Standalone
# Host-Dependent
A- Personal Computer
1985 1966 1968 1989 1990
Soorce.: ]>alaquest June 19S6
#
1.4-8 © 1986 l>ataquest Incoiporated fuly CCIS Markets
1.4 Product Type Overview
Table 1.4-1
Total CAD/CAM Market by Product Type (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market
Revenue . Systems Workstations
Staixlalone
Revenue Systems
Workstations
Host-Dependent Revenue Systems
Workstations
Personal Computer
Revenue
Systems
Workstations
4,849
65,212 82,056
1,066 11.828
11,828
3.253
5.395
22.240
529
47.988
47,988
5.863
88.769 107.051
1.812 24.194
24.194
3.289 5.939
24,221
762
58.636
58,636
7.116
118.891 139,497
2,947
45,015
45,015
3,172
6,077
26,683
998
67,799
67,799
8,624
157,873 180,471
4.546 79.711
79.711
2,993
6,002
28.600
1.085
72,160
72.160
10,397
211,532
234,056
6,680 133,802
133,802
2,617
5,297
27,822
1.099
72.432
72,432
12,511
283,682 304,055
9,328 210,545
210,545
2.143
4.120
24.493
1.040
69,017
69.017
20.9X
34.2X 29.9X
54.3X 77.9%
77.9X
-8.OX
-5.2X
1.9%
14.5%
7.5%
7.5%
SOURCE: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 1.4-9
1.4 Product Type Overview
Table 1.4-2
Total CAD/CAM Market by Product Type (Percent of Total)
1985 1986 1987 1988 1989 1990
Stwidatone
Revenue Systems Worlcstatfons
Host-Dependent
Revenue
Systems
Uorl(stations
Personal Computer
Revenue
Systems
Workstations
22X 18X 14X
67X 8X
27%
11X 74X 58X
31X 27X 23X
56X 7X 23X
13X 66X 55X
41X 38X 32X
45X 5X 19X
14X 57X 49X
53X SOX 44X
35X 4X 16X
13X 46X 40X
64X 63X 5A
25X 3X t2X
T1X 34X 31X
75X 74X 69X
17X IX 8X
8X 24X 23X
SOURCE: Dataquest June 1986
1.4-10 © 1986 Dataquest Incorporated July CCIS Markets
1.4 Product Type Overview
Table 1.4-3
Total CAD/CAM Market Average Price per Seat (Thousands of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types
Standalone
Host-Dependent
Personal Computer
56.0
69.1
130.1
20.6
55.7
57.6
111.7
19.2
46.2
50.0
95.1
18.0
AO.O
43.0
80.5
16.8
34.4
36.8
67.3
15.5
29.6 -12%
31.5 -15%
55.2 -16%
14.1 -7%
Source: Dataquest
June 1986
CCIS Markets © 1986 Dataquest Incorporated July 1.4-11
1.5 Revenue Source
As illustrated in Figure 1.5-1 and Tables 1.5-1 and 1.5-2, Dataquest believes that hardware (including computers, graphics, and peripherals) accounted for 62 percent of CAD/CAM revenue in 1985. We see hardware revenue falling to 46 percent of the market by 1990, with the balance comprised of software and service revenue. The implications of this trend are as follows:
•
•
As hardware prices continue to fall, the turnkey vendors will find it more difficult to bury profit margins in bundled hardware/software configurations.
Although hardware is declining as a percentage of gross revenue, hardware revenue is expected to reach $5.8 billion by 1990, up from nearly $3 billion in 1985.
Personal computer hardware values are expected to rise over the next few years due to the expected sale of configurations with larger disk and memory configurations along with higher-performance graphics boards.
•
CCIS Markets © 1986 Dataquest Incorporated July 1.5-1
1.5 Revenue Source
Figure 1.5-1
Total CAD/CAM Market Revenue by Revenue Source
1985
1990
I I Hardware
\\"%Si Software
l i i l i Service
Source: I>atam>ett Joite I9g£
1.5-2 1986 Efetaquest Incorporated July CCIS Markets
1.5 Revenue Source
Table 1.5-1
Total CAD/CAM Market by Revenue Source (Millions of Dollars)
All Product Hardware
Software
Service
Total
Standalone
Hardware Software
Service Total
Types
Host-Dependent
Hardware
Software
Service Total
Personal Conputer
Hardware
Software
Service Total
1985 sr==
2,996
1,213
639 4,849
541
405 120
1,066
2,101
643 509
3,253
354
165
10 529
1986 s=rs
3,590
1,521 752
5,863
955
652 206
1,812
2,124
633 532
3,289
511
236
15
762
1987 3SZ=
4,185
2,016 915
7,116
1,524
1.073 350
2,947
1,998
628 546
3,172
663
315 19
998
1988 s=ss
4,791 2,676
1,158 8,624
2,273 1,701 572
4,546
1,808
620 565
2,993
709
355
21 1.085
1989 ss==
5,337
3,530 1,530
10,397
3,169 2,587 925
6,680
1,466
567
584
2.617
702
376 21
1,099
1990
====
5,807
4,611 2,092
12,511
4,098
3.757 1,473 9,328
1,065
479 599
2,143
644
375 20
1,040
Source:
CAGR ====
14% 31% 27%
21%
50%
56% 65% 54%
-13%
-6%
3%
-8%
13%
18% 15%
14%
Dataquest
Juiie 1986
•
CCIS Markets 1986 Dataquest Incorporated July 1.5-3
jl.5 Revenue Source
Table 1.5-2
Total CAD/CAM Market by Revenue Source (Percent of Total)
1985 1986 1987 1988 1989 1990
Al l Product Types Hardware Software Service
Total
Standalone
Hardware
Software
Service
Total
Host-Dependent
Hardware
Software
Service
Total
Personal Coinputer
Hardware
Software
Service
Total
62X 25X 13X 100X
51X 38X 11% 100X
65X 20X 16X 100X
67X 31X 2X
100X
61X 26X 13X 100X
53X 36X 11X 100X
65X 19X 16X
100X
67X 31X 2X
100X
59X 28X 13X 100X
52X 36X 12X 100X
63X 20X 17X 100X
66X 32X 2X
100X
56% 31X 13X 100X
SOX 37X 13X 100X
60X 21X 19X 100X
6SX 33X 2X
100X
SIX 34X 1SX 100X
47X 39X 14X 100X
S6X 22X 22X 100X
64X 34X 2X
100X
46X 37X 17X 100X
44X 40X 16% 100X
SOX 22X 28X 100X
62X 36X 2X
100X
Source: Dataquest
June 1986
1.5-4 © 1986 Datequest Incorporated July CCIS Markets
2.1 Mechanical Definitions
The mechanical segment refers to CAD/CAM products that are typically used to support the design and manufacturing of components and mechanisms. The users are most often engineers, designers, or draftsmen involved in the design and documentation process. The following paragraphs give detailed definitions of the scope of the market comprised of end-user industries and the evolution of major CAD/CAM applications. Later sections include an Executive Summary, a Market Overview, a Market Forecast, and an in-depth assessment of emerging technologies.
DEFINITION OF MECHANICAL CAD/CAM MARKET
Dataquest has defined the mechanical CAD/CAM market in terms of the users of the technology and applications being used. The users are categorized by industry groupings, with typical products and organizations described. The major CAD/C/yvl system applications defines a framework that allows a full analysis of the total CAD/CAM application area.
Refer to the following sections for a detailed definition and analysis of the mechanical CAD/CAM market:
• Definition by End-User Industry
• Definition by Major System Application
Dennition by End-User Industry
The mechanical CAD/CAM market is defined to include all of the manufacturing industries as shown in Figure 1.
Some of these industries certainly have a stronger need than others, but it is difficult to find any industry that does not use some mechanical component in its products or in manufacturing its products. Dataquest uses the U.S. Department of Commerce's Standard Industrial Classification (SIC) codes to define the major industries using mechanical CAD/CAM tools. The top five manufacturing industries plus the Other group defines the CAD/CAM market. The corresponding industry and SIC number are aircraft (Code 372), automotive (Code 371), machinery (Code 35), electrical (Code 36), and fabricated metal (Code 34).
Aircraft
CAD/CAM techniques are ideally suited to the aircraft/aerospace environment. The large documentation requirements representing thousands of parts and assemblies are well suited to production by CAD systems. Complex design tasks are compounded by the proliferation of airframe models and features. In reality, each plane or vehicle is unique, requiring its own set of documentation for manufacturing and maintenance. The complete process from conceptual design through detail design, analysis, test, fixturing, manufacturing, and service/repair now uses CAD/CAM technology.
CCIS Markets © 1986 Dataquest Incorporated July 2.1-1
2.1 Mechanical Definitions
Figure 2.1-1
Mechanical CAD/CAM Manufacturing Industries
Source: Dataquest June 198S
2.1-2 1986 Dataquest Incorporated July CCIS Markets
2.1 Mechanical Definitions
The early stages of conceptual design are aided by solid modeling and realistic visualization techniques. As the design moves into ttie analysis and detail design phase, finite element stress analysis becomes important as a design tool. Manufacturing gets involved designing tooling, fixtures, and processes that manufacture and bring all the components together in final assembly. Numerical control part programming has been one of the strongest CAM development areas in the aerospace industry. Computer-aided testing and quality assurance play an important function in guaranteeing that the original design was accurately built. The use of computer-aided tools does not end here. Computer graphics, technical publication, and artificial intelligence procedures are being combined into interactive, portable service, diagnostic, and repair workstations. The ongoing service and repair operations are becoming more efficient as a result.
The above brief examples are typical of the aggressive use of C/UD/CAM techniques in the aerospace design and manufacturing operation. Because CAD/CAM techniques are used from start to finish, many benefits are realized by sharing data from one step to the next. Reduced errors, faster response to changes, and better control are some of the significant benefits.
Automotive
The benefits of proven CAD/CAM applications are found in abundance in the automotive industry. Similar to the aerospace industry, large documentation requirements and complex design tasks are common. A very competitive worldwide market, governmental controls, and rapidly increasing complexity in technology and material requirements are making the automotive industry more dependent on CAD/CAM tools.
A description of the automotive design process starts with the stylist. The computer-aided engineering tools for vehicle concept and styling development are becoming well developed. Conceptual simulation and analysis software is being combined with visualization software to produce photographic-quality images of rendered surfaces. Animation techniques are being used to add motion to the realistic images. Engineering, advertising, and styling all can benefit from the moving simulations. But much more than pretty pictures are developed. Using the resulting mathematical data base, the same models can be tested for driver visibility, packaging, and, with more detail, for simulation of ride and performance characteristics.
When the body, power train, and chassis design groups get involved, the new car project is scheduled for production in as little as 18 months. The detailed design progresses, working from the outer surface toward the center of the fire wall. The 6,000 or more parts that make up a typical automobile are detailed, assembled, and verified. If designed properly, the doors will open, the lights will light, and the wheels will not fall off after the first chuckhole.
CCIS Markets © 1986 Dataquest Incorporated July 2.1-3
2.1 Mechanical Definitions
The manufacturing process is a complex choreography of purchased and manufactured parts with thousands of time-dependent milestones, resulting in the right part being at the right place for assembly. Manufacturing engineering is responsible for production tooling, including design for dies, molds, and sheet metal parts.
The manufacturing and assembly group is responsible for assembly layout, tool fabrication, and programming for the decision support and control computer systems. Numerical control part programming, material resource planning, computer-aided processing, robot programming, and process control programming are just a few of the supporting functions of this group.
Machinery
The products produced in the general machinery industry start with the most common parts such as nuts, screws, and washers. These are combined with cast, molded, and other machined components to make up the next tier of finished goods, which include saws, polishers, sprayers, drills, and mixers.
The mechanical CAD/CAM applications used in the aerospace and automotive industries are typical of those used in the general machinery industry but at a higher level of complexity. The manufacturing tolerances in the general machinery industries are not as stringent, the materials used are not as exotic, and the overall level of product sophistication is not as complex. There are exceptions, however, in medical, food, and other processing applications. The CAD/CAM tools are involved in all aspects of product, assembly, and component design as well as in manufacturing support for tooling, fixtures, and processes.
Electrical
Electrical and electronic machinery includes almost everything that runs on electricity, such as appliances, cooking equipment, sewing machines, lighting fixtures, radios, television sets, and X-ray equipment.
The mechanical CAD/C/\M applications required to design, document, and manufacture these products cover the full spectrum of today's capabilities. Castings, forgings, and sheet metal enclosures are typical components in appliances and cooking equipment. Many molded cabinets, housings, and piece parts are used in consumer electronics and commercial equipment.
The added complication of designing products with both mechanical and electronic components requires close attention to the design goal and coordination throughout the manufacturing process. The design and manufacture of the electronic components is discussed in detail in later sections of the Market and Analysis binder.
The combined electromechanical market is targeted for an in-depth research project later this year.
2.1-4 © 1986 Dataquest Incorporated July CCIS Markets
2.1 Mechanical Definitions
Fabricated Metal
Typical products produced in this industry include industrial fasteners, screw machine parts, valves, pipe fittings, and ball/roller bearings. Castings, forgings, extrusions, and bar stock are turned, coined, swaged, bent, and twisted to make these parts.
The CAD tools used to support the design and manufacture of these products range from basic drafting-only systems to full CAD/CAM and computer-aided engineering systems. Use of computerized tools has led to greater efficiency in small lot production. Numerical control (NC) machine tools can effectively produce one-off prototype parts or small production runs of up to several hundred parts. The increased precision in NC manufacturing has allowed some valve manufacturers to upgrade the pressure and temperature specifications of their valves. The use of CAD/CAM tools allows quicker response to customer requests, giving the small manufacturer a significant advantage.
Other
The Other manufacturing industries comprise a great variety of sometimes large industries that have varying levels of experience and success in using CAD/CAM technology. As a group, the number of users is fairly large, but the CAD/CAM applications used are extremely diverse. A brief list of manufacturing industries in this group will illustrate the issue. These industries include: food, apparel, lumber products, furniture, bathroom fixtures, railroad equipment, instruments, watches, games, and caskets. The opportunity for niche product development in this group is large. Vendors interested in developing effective tools for these markets must have extensive user application experience to guarantee useful results.
Definition by Major System Application
Dataquest uses four common system usage groups for comparison, aiding in the organization of information in each of the CAD/CAM application segments. These groups are documentation, design, analysis, and manufacturing, as shown in Figure 2.
Documentation
Considering the diversity of complex machinery that has been designed and tediously drafted with pen and paper, it is no surprise that a step forward in automating the drafting process has been received with open arms. The drafting process is defined by simulating the manual process of generating layout, detail, and assembly drawings in a CAD system. Each line, circle, and piece of text is created and placed with the appropriate system command, allowing the user to build the drawing. Advantages inherent in CAD technology allow rapid revision of the Stored data with fast duplication and overlay techniques.
CCIS Markets © 1986 Dataquest Incorporated July 2.1-5
2.1 Mechanical Definitions
Figure 2.1-2
Mechanical CAD/CAM Markets—Manufacturing Industries
/
y y^
/
Documentation
Design
Analysis
Manufacturing
Major Applications
Source: Dataquest June 1986
2.1-6 1986 Dataquest Incorporated July CCIS Markets
2.1 Mechanical Definitions
The major documentation, drafting, and schematic applications are:
• Detail drafting
• Layout
• Assembly/subassembly
• Charts
• Hydraulic and pneumatic schematics
• Technical illustration/documentation/publication
Design
The general trend in computer graphics is toward design simulation. Design in this context is typically a three-dimensional problem where component parts are fit together, defining the assembly. The amount of detail in these models varies from a few lines and circles to very complex assemblies with every surface and corner precisely defined.
An essential system function is the ability to view the design from any orientation. Combining the ability to model part geometry with the viewing functions gives the designer a powerful design tool. The common user expectation is to be able to produce a better design using CAD but with the same time investment.
The major design applications are:
• Part modeling
• Visualization
• Assembly design and verification
• Clearance and assembly studies
• Linkage/mechanism design
Analysis
Analysis is entwined in the design process. Making sure all the parts fit together and meet the design goals is the most common type of analysis. As the modeling process has improved, so have the analytical tools to evaluate the models. An example is finite element mesh modeling and analysis. This general technique
CCIS Markets © 1986 Dataquest Incorporated July 2.1-7
2.1 Mechanical Definitions
has at its roots a divide-and-conquer procedure for simplifying the calculation required to evaluate thermal or structural properties of the design. These calculations can be performed for two- or three-dimensional analysis. By defining the conditions of the structure where it attaches to other components, the design can be twisted, pulled, and shaken, all using computer simulation. The tedious effort of setting up a typical test and waiting for tfie results has been shortened from days to hours. Unfortunately, hours can seem like days when the axles are breaking off your trucks and you do not know why. If the analysis could be done in minutes, more analyses would be done earlier in the design process, improving product reliability.
Major analysis applications include:
• Mass properties
• Component/assembly deformation and stress
• Thermal
• Structural
• Vibration
• Magnetics
• Dynamic
• Fatigue
• Composite materials
Manufacturing
In many respects, the applications and benefits of using computer-aided drafting, design, and analysis all apply to the manufacturing operation. Sharing the product design data base is a good start in improving the operation, but it is just the beginning. Many drawings are generated for production equipment construction and documentation. Tools and fixtures need to be designed or redesigned for the next product revision. The full range of simulation and analysis tools are valuable in Optimizing the manufacturing process. Part geometry is being used to define the tool cutting path on a numerically controlled mill, iathe, drill, or other machine tool. Robotic work cell simulation is a major CAM application in development. In general, the use of CAM in manufacturing has the biggest potential for productivity gains, resulting in improved profitability for the user company.
2.1-8 © 1986 Dataquest Incorporated July CCIS Markets
2.1 Mechanical Definitions
Major manufacturing CAD/C/^M applications are divided into two groups: manufacturing engineering and process simulation/interface.
Manufacturing engineering includes:
• Fixture and tool design
• Sheet metal development
• Part processing
• Quality control
• Group technology (classification and coding)
Process simulation includes:
• Numerical-controlled machine tool programming (DNC and CNC)
• Nesting and flame cutting
• Tube bending
• Coordinate measuring machine
• Robotics (machine loading, assembly, and spot welding)
• Material-handling systems
• Programmable controllers
Other important computer applications are in use in the manufacturing environment but are not included in the CAD/C/^M evaluation. These other applications are:
• Manufacturing resource planning
• Production and inventory control
• Shop floor control
CCIS Markets © 1986 Dataquest Incorporated July 2.1-9
2.2 Mechanical Executive Summary
This summary highlights the key points and analyses discussed throughout this chapter. Please refer to the chapter in its entirety for a comprehensive analysis of the mechanical application segment.
• Mechanical C/UD/CAM revenue was $2,677 million in 1985 and is forecast to grow to $3,226 million in 1986 and to $6,760 million in 1990.
• The estimated total number of mechanical CAD/CAM workstation units shipped in 1985 was 40,635. Dataquest forecasts that 53,568 units will be shipped in 1986 and 176,265 units in 1990.
• Dataquest forecasts that workstation units in the mechanical CAD/CAM market will grow at 34 percent CAGR for the next five years.
• The personal computer has grown from a minimal workstation share in 1982 to represent more than 56 percent of the workstations shipped in 1985.
• The average mechanical workstation price dropped to $68,100 in 1985, and is projected to drop to $58,400 in 1986 and to $27,300 in 1987.
• The predominance of drafting as an application of the low-end CAD product will fade as higher-performance/low-cost processors become available and as users demand the full repertoire of application software.
• The desktop environment is being viewed by vendors as the prime market for attracting the masses to CAD/CAM products. High user acceptance of the total solution will require full applications support, networking, and easy-to-use, reliable products.
• Some of the fastest application growth areas in the next two years will be:
— Computer-aided engineering for mechanical applications, including design simulation, solid modeling, and finite element analysis
— The manufacturing environment; well-integrated manufacturing software products to become more widespread as C/^D/CAM moves into the shop area
— The combined electrical and mechanical application; vendors who have historically focused on the mechanical or electrical applications to provide integrated packages
CCIS Markets © 1986 Dataquest Incorporated July 2.2-1
2.3 Mechanical Market Overview
HISTORY
The early and mid-1960s saw the emergence of computer graphics as a practical tool. Some of the earliest graphics work was developed for the military using mainframe computers. Massachusetts Institute of Technology was an early contributor, providing a training ground for pioneers in this field such as S. Coons, I. Sutherland, and S. Chasen. In the late 1960s, the basic elements of computer, display, and software came together to form the first commercial turnkey CAD systems. The first systems were focused on printed circuit layout and were only able to draw straight horizontal and vertical lines. The users immediately began asking for more features. An early enhancement, two-dimensional drafting, made CAD practical for mechanical applications. Computervision and Applicon were formed in 1969 to supply these primitive two-dimensional CAD tools.
The early 1970s witnessed essential development for the mechanical applications, as P. Bezier, H. Gouraud, E. Catmull, and W. Gordon completed their basic research in curve surface definition and display. By the mid-1970s, this research was being used in the first three-dimensionai design systems. The designer could now string wires and some surfaces in three dimensions. Fontaine Richardson, Patrick Hanratty, Gerry Devere, and David Albert are some of the key figures who took the research of tlie day and turned it into usable CAD products.
Industry giants such as Lockheed, Matra, and General Motors early understood the value of computer graphics and developed internal systems that are still in use today. In fact, some of their original products are the basis of today's successful commercial CAD products such as CADAM and Euclid. The 500 plus companies that currently make up the CAD/CAM industry accumulated more tlian $4.8 billion in revenue in 1985.
THE PRESENT
Today's CAD/CAM market has emerged as an essential ingredient in the worldwide trend toward factory automation. For a better understanding of the progress of this trend in four major mechanical industries, refer to Table 2.3-1. This table defines the size and growth rate of each major industry.
Work Environment
The current CAD/C/\M work environment in each of the major SIC code areas is very similar, but with some unique variations. Drafting standards are well defined for all industry segments. Design tasks for a car door and a cargo bay hatch are quite similar, depending on size or performance characteristics. Unique design and manufacturing problems do occur, but the CAD/CAM systems are generally flexible enough to be custom tailored for the job.
CCIS Markets © 1986 Dataquest Incorporated July 2.3-1
2.3 Mechanical Market Overview
Table 2.3-1
Analysis and Forecast of Major Industries Using Mechanical CAD/CAM
1982 1984 1986* CAGR
1984-1986
Aerospace Industry
SIC 372, 376
Value of Shipments Value of Imports Value of Ejqjorts Total Employment
Motor Vehicle Composite
SIC 37Ix
Value of Shipments Value of Imports Value of Exports Total Employment
Composite Metal Working, General and Special Industrial Machinery
SIC 35XX
Value of Shipments Value of Imports Value of Exports Total Employment
Composite General Components and Stampings
SIC 34XX
Value of Shipments Value of Imports Value of Exports Total Employment
•* Forecast based on IT A forecast
$ $ $ $
66,466 4,242 15,335
685,000
$ 80,050 $ 4,664 $ 15,105 $713,000
$ 96,582 $ 6,028 $ 19,310 $759,000
9.8% 13.7% 13.1% 3.2%
$ $ $ $
112,270 22.713 10,352
615,200
$178,517 $ 43,240 $ 10,510 $784,700
$160,366 $ 38,445 $ 12,554 $712,100
(5.2%) (5.7%) 9.3% (4.7%)
$ 92,026 $ 7,734 $ 21,571 $1,011,300
$ 94,059 $ 10,680 $ 16,331 $956,000
$ 94,962 $ 13,318 $ 16,664 $934,100
0.5% 11.7% 1.0%
(1.2%)
$ $ $ $
23,651 1,501 2,487
299,700
$ 30,890 $ 980 $ 2,220 $321,900
$ 31,198 $ 2,505 $ 2,649 $327,000
0.5% 59.9% 9.2% 0.8%
Source: U.S. Industrial Outlook—1986 International Trade Administration (ITA)
2.3-2 1986 Dataquest Incorporated July CCIS Markets
2.3 Mechanical Market Overview
Today's complex product design and manufacturing environment requires a Staff with many talents. Mechanisms, electronics, hydraulics, and pneumatics often are used in the same design. New materials and manufacturing processes are being developed to lower the cost and maintain acceptable performance. More stringent legislation for noise or emission pollution is creating many design challenges.
The present manufacturing environment is tough, with shorter product life cycles and a rapidly growing list of competitors from all over the worid. The best chance for success is based on building the right products at the right time, and operating more efficiently than the other competitors. More and more product design and manufacturing groups are turning to CAD/CAM to help make it happen, and many success stories have been documented. It is no longer a question of will CAD/C/\M work, but of which system should be used and how the operation will improve as a result.
System Usage
Dataquest uses four common system usage groups for comparison: drafting, design, analysis, and manufacturing. A 1985 Dataquest user survey determined the percentage split of system use for mechanical applications:
• Drafting and schematic—52 percent
• Design—31 percent
• /^alysis—7 percent
• Manufacturing—10 percent
(See CAD/CAM Industry Service Research Newsletter No. 84, entitled "1985 CAD/CAM User Survey Results," for a detailed analysis of our survey.)
The following paragraphs present a brief analysis of each usage group.
Documentation
The importance of the engineering document cannot be over emphasized. It represents the legal description and bible of knowledge that fully specifies the product and every manufacturing process required to produce it. Each department in a manufacturing organization receives some form of drawing, puts in its value added in the form of detail or specifications, and passes on the package of documents to the next group. The sketch of a new product or product revision starts the process. The owner manual or installation guide shipped with the product is the end of the process. A design revision starts another cascade of documents through the organization.
CCIS Markets © 1986 Dataquest Incorporated July 2.3-3
2.3 Mechanical Market Overview
The CAD vendors have gone to considerable lengths to develop effective systems to expedite the design-to-drawing generation process. At least 50 percent of the design work is done in conjunction with the drawing. This is true in the aerospace, automotive, machinery, and fabrication industries.
Continued dependence on the drawing is a strong factor in the dramatic increase in low-cost drafting CAD systems. As users become more experienced, their need for more functionality also increases. This applies to enhanced drafting operation and performance as well as expansion into other CAD/CAM applications.
Design
Product design falls into two fairly distinct groups—new product development and existing product enhancement. The essence of the difference suggests starting with a clean sheet of paper versus enhancing an existing design that is already in production. CAD tools are equally suited for either activity. In fact, a real opportunity exists to improve design process productivity by sharing the CAD data base between new product design and existing product development.
The design process begins with a problem. The solution can take a few moments or years, with the real possibility of no practical solution being found. For an experienced designer it sometimes seems all that is required is the back of an envelope and a tough problem to start the creative juices flowing. The "ah-ha," or moment of inspiration, begins the design process. The primary benefit of the CAD system provides an efficient means of documenting the design process and assists in proving the concept.
Analysis
/Analysis starts shortly after the moment of inspiration, which occurs in the design process. Analysis begins with what-if scenarios and continues with an impressive array of analytical tools that simulate everything from the weight and color of a part to its modal signature as it vibrates.
Low-cost and high-performance general-purpose computers are ideally suited to complement the design process with responsive and affordable analysis processing. The list of analysis applications is getting longer and now includes stress, thermal, mechanism, dynamic, electromagnetic, and mass properties. The major analysis applications are utilized to simulate the product in its as-used environment and as it progresses through the various stages of manufacturing. Analytical tools are useful in every stage of the product design and manufacturing processes.
The combination of CAD/CAM tools for design and analysis is named Mechanical Computer-Aided Engineering (MCAE). This was the topic of a recent Dataquest Research Newsletter (number 1986-11) and of a panel discussion at the 1986 annual conference. Please refer to the newsietter for more information on this application area.
2.3-4 © 1986 Dataquest Incorporated July CCIS Markets
2.3 Mechanical Market Overview
#
Manufacturing
The manufacturing process takes the result of design and analysis and turns it into chips and pallets of finished parts waiting for assembly. A large support team of professionals keeps the operation running smoothly, including tool makers, maintenance, and quality-assurance personnel. The automotive industry has been the most aggressive in replacing the blue-collar worker with flexible machining centers and automated material-handling equipment, but competitive pressures are now forcing the factory automation issues in all major industries. CAD/CAM systems are an integral part of this operation.
Simulation of numerically controlled machine tools, which generates the program to control the actual manufacturing process, is one of the most common CAM applications. The use of C/^/CAM tools in manufacturing is much more than numerical control (NC) part programming. Jigs, fixtures, tooling, test equipment, material handling, packaging, and dozens of other manufacturing-related tasks use CAD/C/^M.
The combination of computer graphics with data for shop control, schedules, material resource planning, and bill of materials generation is having a positive effect on the smooth operation on the shop floor. A significant opportunity is available for the vendors to provide integrated systems for these applications.
TRENDS
Applications
• Dataquest believes that drafting will remain the major selling application in C/UD/C/VM for the next few years. This is due to the following:
— The low-cost drafting-only system is functional.
— It is easy to justify.
— It is not threatening.
• Design tools are being developed that meet the real needs of the designer. The trends in this evolution include three-dimensional modeling of any realizable object using realistic imaging and conceptual design techniques. The resulting accurate data base supports the foUow-on manufacturing and documentation applications. Rule-based design tools are also being developed to aid the designer in similar part design and design procedures.
• Mechanical Computer-Aided Engineering (MCAE) is the fastest growing segment in mechanical applications. Products from turnkey and software-only vendors are being developed to meet the conceptual and product design and analysis needs of the engineer and designer.
CCIS Markets © 1986 Dataquest Incorporated July 2.3-5
2.3 Mechanical Market Overview
• The systems discussed above will provide a solid foundation for a staggering array of applications software. The major CAD/C/^M applications have been implemented. These are being enhanced and are becoming easier to use and more productive. New applications will address more extensive design and simulation tasks.
• Full application integration will be provided to minimize the system overhead and improve user interface. Customization by the user will be necessary in order to take full advantage of these tools.
• Major factory automation projects are under way in all major manufacturing industries. The full implementation of computer-aided technology in the manufacturing environment is moving from the test tube to the real world. The automotive industry is the leader in developing and implementing robotics, flexible machining centers, just-in-time plant inventory, and shop floor communications data format.
Technology
• The total system package price will continue in a downward trend as component prices fall. Value-added hardware and applications software will tend to keep system prices above the commodity level.
• The trend in personal computer-based products to upgrade to higher-performance processors, memory, storage devices, and display is causing an increase in average system configuration. At the same time, the drop in component prices is resulting in a near constant package price for a PC-based system.
• The need to rapidly communicate accurate engineering information among many organizational groups is driving the development of low-cost local area networks. The hardware is available but the software lacks the ability to provide full system security and management control functions.
• Integrated systems using personal computers, standalone workstations, and mainframe computers are evolving, taking advantage of the best each has to offer.
• Developments in computational resources, including application-specific integrated circuits, are raising performance to previously dreamed-of levels.
• The performance of graphic display is improving, and at a lower package price. Application-Specific integrated circuits and low-cost display memory are supporting this evolution.
2.3-6 © 1986 Dataquest Incorporated July CCIS Markets
2.3 Mechanical Market Overview
User Expectations
The easy-to-use user interface typical of PC-based software is creating an expectation in the minds of the users. Software should be easy to use with minimal training required and built-in tutorial functions.
The level of integration is expected to improve at the data base, user interface, application, and system management levels.
The diversity of hardware options is increasing in primary system components as well as in peripherals. Computational servers, laser printers, and scanners are a few new-generation peripheral options.
The functional level of the system is improving in all price groups for all applications.
System reliability and support are improving as vendors respond to the basic expectations of the users.
Many of the graduating engineers and technicians have used CAD/CAM technology in school and are demanding these tools when they enter the job market.
Users are more interested in becoming system integrators, pulling together systems with off-the-shelf hardware and software. If the price premium for a package deal or turnkey solution is not too high, the benefits of a single-source supplier are still desirable.
DRIVING ISSUES
Industries
• The general trend in 1986 in all major mechanical industry sectors is toward increased levels of product shipments with continued growth in the next few years.
• Non-U.S. competition is growing, focusing added pressure on the critical long-term issues of cost control, improved product quality, and products that offer enhanced customer appeal.
• The use of new materials is forcing the need for higher levels of design, analysis, and manufacturing development.
CCIS Markets © 1986 Dataquest Incorporated July 2.3-7
2.3 Mechanical Market Overview
CAD/CAM Technology
• CAD/C/y/I technology has been identified as an integral component in the modernization of manufacturing industries.
• The aggressive marketing and product development of IBM is designed to maintain its world leadership position as the number one computer supplier. This is forcing the software developers to make IBM one of the computing options.
• Integration of application software is a strong driving factor in CAD/CAM system development; i.e., hardware and software must function together as a unified system.
• Improved user interfaces must allow effective system utilization that logically supports the complete design and manufacturing process.
• Continued enhancements in the semiconductor industry are improving the performance of computers and related peripherals. The price/performance ratio is expected to continue to improve by a factor of two every other year for the foreseeable future. (This may be a bit conservative in the short term.)
• Standards in graphics displays, data base transfer formats, and communications protocol are being used. Large users are demanding that vendors support standards allowing communication among different vendor systems.
• More emphasis is being placed on the availability of management tools for the control and manipulation of information systems.
• Company-to-company graphics data transfer is becoming a common requirement, particularly in the automotive sector.
OPPORTUNITIES
At the Low End
• Low-cost standalone or low-end networked systems for text and part-time graphics operations
• Limited applications software filling niche markets with low-cost products (e.g., low-resolution technical publications)
2.3-8 © 1986 Dataquest Incorporated July CCIS Markets
2.3 Mechanical Market Overview
• Add-on hardware to enhance special-purpose applications (e.g., a scanner for raster image input)
• Interactive drafting systems with interfaces to higher-end products (provides upward growth path)
• Innovative training techniques for low-cost systems
At the Midpoint
• Department-oriented general-purpose systems that do the whole job with higher performance
• Networks with low-end systems taking advantage of the best features of both types of systems
• Special-purpose processors for applications that require significant computing horsepower (e.g., analysis, real-time simulation, and image processing)
• New input devices to improve user interface to high-performance systems
At the High End
• Corporate-oriented large systems (500 plus users) with complex data base requirements and diverse applications software
• Applications requiring massive data base access and manipulation
CCIS Markets © 1986 Dataquest Incorporated July 2.3-9
•
2.4.1 Total Mechanical CAD/CAM
This section covers the total mechanical CAD/CAM market for all regions and product types. Figures 2.4.1-1 Revenue and 2.4.1-1 Shipments and Table 2.4.1-1 reflect these data.
• The mechanical segment was an estimated $2,677 million in 1985 and is forecast to grow to $6,760 million in 1990, at a compound annual growth rate (CAGR) of 20 percent.
• Dataquest estimates that revenue will increase 22 percent in 1986, reaching $3,266 million.
• Workstation shipments in 1985 were an estimated 40,635 units; shipments are expected to reach 176,265 units in 1990, growing at a 34 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 2.4.1-1
2.4.1 Total Mechanical CAD/CAM
Figure 2,4.1-1 Revenue
Mechanical CAD/CAM—Worldwide
•
Millions of Dollars 7000 -
6300-
5600-
4900
4200
3500
2800
2100
1400
700
. X X
\ .
s V*"XXA
;w"' vX\.'",.%^
1985 1986 1987
^
SS^ ^ v ' % \ \ \XX*'A S ^ ^ N Vv-^^
iX^^X''^ .,v. v< 'V S, X T., 1
> ^ hX-s^^
^w 1989
Source: Dataquest June 1986
2.4.1-2 1986 Dataquest Incorporated July CCIS Markets
2.4.1 Total Mechanical CAD/CAM
Figure 2.4.1-1 Shipments
Mechanical CAD/CAM—Worldwide
Workstation Shipments 180000
160000-
140000
120000
100000
80000
60000
40000
20000
1985 1986 1987 1986 19S9 1990
Source: Dataquest June 1986
CCIS Markets © 1986 Dataquest Incorporated July 2.4.1-3
2.4.1 Total Mechanical CAD/CAM
Table 2.4.1-1
Mechanical CAD/CAM—Worldwide Total Applications
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Tota l Market
Revenue
Systems
2,677 3,266 3,952 4,742 5,664 6.760
29,632 42,232 59,457 83,537 118,473 167,133
Workstations 40,635 53,568 71,909 96,607 130,282 176.265
20.4% 41.3% 34.IX
Source: Dataquest
June 1986
2.4.1-4 1986 Dataquest Incorporated July CCIS Markets
2.4.2 Mechanical Market Shares
This section includes Dataquest's forecasts and analysis of the mechanical market share distribution. Figure 2.4.2-1 and Table 2.4.2-1 reflect these data.
• IBM and Computervision continued to dominate the mechanical market in 1985 with 29.3 percent and 11.4 percent market shares, respectively, worldwide.
• IBM gets over 90 percent of its CAD/CAM revenue from the mechanical application area.
• Computervision generated a surprising 55 percent of its revenue from European sales and support.
• Of the top three vendors, only Intergraph managed to gain market share in 1985. Mechanical applications now represent over a third of the revenue of the company.
• McDonnell Douglas is continuing to be aggressive in going after mechanical CAD/CAM.
• Prime almost doubled its revenue in 1985; its market share rose to 4.2 percent.
• Applicon also gained share in 1985, but this was due to the joining of Applicon and MDSI at midyear. MDSI represented about $45 million of the Applicon total.
• Control Data more than doubled its 1984 revenue, rising to 3.5 percent market share in 1985.
• Calma has lost market share, moving from fifth place in 1984 to eighth in 1985.
• Hitachi is a new name on the top 10 list. It has been doing very well selling its products only in Japan.
• Hewlett-Packard is also new on the top 10 list.
• The Other 116 mechanical CAD/C/yVI vendors represented 29.4 percent of the market.
CCIS Markets © 1986 Dataquest Incorporated July 2.4-1
2.4.2 Mechanical Market Shares
Figure 2.4.2-1
Mechanical Market Share—Worldwide 1985
Hewlett-Packard 1.9%
HJtaclil 2.2%
Control Data 3.5%
Source: Dataquest June 1986
2.4-2 1986 Dataquest Incorporated July CCIS Markets
2.4.2 Mechanical Market Shares
t Table 2.4.2-1
Mechanical Market Share—Worldwide (Millions of Dollars)
COMPANY
IBM ConIputervision
Intergraph
McAuto
Prime Applicon
Control Data
Catma Hewlett-Packard
Matra Datavision Auto-Trot
Cimlinc
Ferranti
Grafteic
Gerlser Systems MacNeal Schuendler
SDRC Holguin-CAD
Autodesk
Other Computer Companies Other Europe Companies
Other Far East Companies
Other Turnkey and Software All Companies
1985
REVENUE
$ $ $ $ $ $ $ $ $ % $ $ $ $ t % $ $ $ $ $ $ $ $
783 304 165 139 112 111 93 70 50 35 33 32 26 24 22 20 13 13 11 75 133 344 70
2,677
Source:
1985
SHARE
29.3% 11.4%
6.2% 5.2%
4.2% 4.1%
3.5%
2.6%
1.9%
1.3% 1.2%
1.2%
1.0%
.9%
.8%
.7%
.5%
.5%
.4% 2.8%
5.0%
12.9%
2.6%
100.0%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 2.4-3
2.4.3 Mechanical Regions
This section includes Dataquest's forecasts and analysis of the mechanical market, segmented by region. Figures 2.4.3-1 Revenue and 2.4.3-1 Shipments and Tables 2.4.3-1 and 2.4.3-2 reflect these data.
• We estimate that the expected 22 percent growth in revenue from 1985 to 1986 will be evenly distributed over four market regions. Dataquest expects the Far East region to make a slight gain in market growth at the expense of the North American and European regions.
• We expect that 50 percent of the annual revenue and 46 percent of the system/workstation shipments to be in the United States in 1986.
• The growing number of non-U. S. vendors are expected to do well in their home markets, displacing U.S. products.
• Domestic vendors will require a concerted effort and strategic alliances with local distributors in Europe and Japan to maintain a significant market share. The next two years will provide the largest opportunity window to gain market recognition and share.
CCIS Markets © 1986 Dataquest Incorporated July 2.4.3-1
2.4.3 Meciianrcal Regions
Figure 2.4.3-1 Revenue
Mechanical CA1>/CAM by Region
MWions of DoUars
32e^
2^10
24m
200Q
1600
1200-
800
400-
• X
North America
Europe
Far East
ROW
I
1985 1986 1987 1988 1989 1990
Source: Dataquest June l^iaA
2.4.3-2 © 1986 Dataquest Incorporated July CCIS Markets
2.4.3 Mechanical Regions
Figure 2.4.3-1 Shipments
Mechanical CAI>/CAM by Region
Workstation Shipments
#
90000
80000-
70000-
60000
50000
40000-
30000
20000
10000-
0)|<— 1985
• X
North America
Europe
Far East
ROW
riir -X-1986 1987 1988 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 2.4.3-3
2.4.3 Mechanical Regions
Table 2.4.3-1
Mechanical CAD/CAM Application by Region
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 ssss
CAGR
Total NarIcet Revenue Systems WorIcstations
2,677 3,266 3,952 4.742 5,664 6,760 20.4X 29,632 42,232 59,457 83.537 118,473 167,133 41.3X
40,635 53,568 71,909 96,607 130,282 176,265 34. IX
Nor til America Revertue Systems Workstations
1,334 1,626 1,967 2,359 2,817 3,361 20.3X
13.583 18,834 27,053 38,055 55,682 80,346 42.7X 17,606 24,506 33,365 44.873 61.803 84.983 37.0X
Europe Revenue Systems Workstations
713 871 1.054 1,265 1,512 1,805 20.4X
11,107 12,510 18,536 25,978 35,172 47.831 33.9X
14.300 15.456 21,605 29,039 37,956 50.045 28.5X
Far East Revenue Systems Workstations
589 719 870 1.044 1.248 1.490 20.4X
4.771 10,366 12.879 17.962 25.447 36.001 49.8X 8.411 12.910 15.774 20.980 28.205 38.172 35.3X
Rest of World Revenue Systems Workstations
41
170
318
50 522 697
61 988
1.165
73
1.542
1.714
87 104
2,172 2,954
2,319 3,066
20.4X
76.9X
57.3X
Source: Dataquest
June 1986
2.4 .3 -4 1986 Dataquest Incorporated July CCIS Markets
2.4.3 Mechanical Regions
Table 2.4.3-2
Mechanical CAD/CAM Application by Region
(Percent of Total)
1985 1986 1987 1988 1989 1990
North America
Revenue
Systems Workstations
Europe Revenue Systems Uorkstations
Far East Revenue
Systems Workstations
Rest of World
Revenue
Systems
Workstations
50% 46% 43X
27X 37% 35X
22X 16X 21X
2X IX IX
50X 45X 46X
27X 30X 29X
22X 25X 24X
2X IX IX
50X 46X 46X
27X 31X 30X
22X 22X 22X
2X 2X 2X
50X 46X 46X
27X 31X 30X
22X 22X 22X
2X 2X 2X
50X 47X 47X
27X 30X 29X
22X 21X 22X
2X 2X 2X
SOX 48X 48X
27X 29X 28X
22X 22X 22X
2X 2X 2X
Source: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 2.4.3-5
2.4.4 Mechanical Product Type
This section includes Dataquest's forecasts and analysis of the Mechanical CAD/CAM market, segmented by product type. Figures 2.4.4-1 Revenue and 2.4.4-1 Shipments and Tables 2.4.4-1 and 2.4.4-2 reflect these data.
• The compound annual growth rate (CAGR) in total revenue from 1985 through 1990 is expected to be 20 percent. This growth will take the $2,677 million in 1985 to $6,760 million in 1990.
• In the short term, from 1985 to 1986, the growth rate is expected to be 22 percent.
• System shipments are expected to grow 32 percent from 1985 to 1986 and at a 41 percent CAGR from 1985 through 1990.
• The Standalone systems are gaining percentage from both PC and host-based systems.
• The growth rate in units shipped for personal computer-based systems will be 28 percent from 1985 to 1986. This is a dramatic slowdown from the 150 percent growth rates of 1985. The trend is expected to continue with less than an 11 percent gain from 1987 to 1988. The CAGR for 1985 through 1990 is expected to be 23 percent in revenue and 11 percent in units shipped.
• Standalone systems are more dramatic, showing estimated growth from 1985 to 1986 of 134 percent in revenue and 166 percent in units shipped. The sustained high growth rate from 1987 to 1988 is expected to be a still significant 76 percent in revenue and 105 percent in unit shipments. This expected growth will result in the highest CAGR by product type from 1985 through 1990, which is forecast to be 76 percent in revenue and 105 percent in workstations.
• Host-dependent systems have reached a plateau, holding relatively constant revenue and unit volume throughout 1987. A rapid decline from there results in a negative 11 percent CAGR in revenue and a negative 5 percent in workstation shipments from 1985 through 1990.
CCIS Markets © 1986 Dataquest Incorporated July 2.4.4-1
2.4.4 Mechanical Product Type
• The host-dependent products dominated 1985 revenue by a decisive 81 percent. Host-dependent systems are expected to represent the highest revenue share until 1988, when they wili be overtaken by standalone systems. The estimated 41 percent share in total revenue in 1988 will be derived from a small 17 percent of workstation unit sales.
• Personal computers peaked in 1985 as a percentage of system shipments. The 76 percent of systems in 1985 will drop to an estimated 23 percent in 1990. Revenue as a percentage of the total industry is expected to peak in 1987 at 15 percent.
• The growth leader is forecast to be standalone products, representing 11 percent revenue and 12 percent system shipments in 1985. This is expected to expand to 74 percent revenue and 76 percent system units in 1990.
2.4.4-2 © 1986 Dataquest Incorporated June CCIS Markets
2.4.4 Mechanical Product Type
Figure 2.4.4-1 Revenue
Mechanical CAD/CAM by Product Type—Worldwide
Millions of Dollars 5000
4500
4000
3500-
3000
2500
2000
1500
1000
500
• Standalone
• Host-Dependent
A Personal Computer
1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 2.4.4-3
2.4.4 Mechanical Product Type
Figure 2.4.4-1 Shipments
Mechanical CAD/CAM by Product Type—Worldwide
Workstation Shipments
120000
100000
80000
60000
40000
20C00
• StandaSons
• Host-Dependent
A personal Computer
1966 1987 1990
Source: Dataquest June 1986
2.4.4-4 1986 Dataquest Incorporated June CCIS Markets
2 .4 .4 Mechanical Product Type
Table 2.4.4-1
Mechanical CAD/CAM—Worldwide Application by Product Type
(Millions of Dollars/Actual of Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market Revenue Systems Workstations
Standalone Revenue Systems Workstations
Host-Dependent
Revenue
Systems Workstations
Personal Computer Revenue Systems
Workstations
2.677 29,632 40,635
294 3,524
3,524
2,161
3,476 14,479
221 22,633
22,633
3,266 42,232 53,568
689 9,380 9,380
2,178
3,782 15,119
399 29,070 29,070
3,952 59,457 71,909
1,280
20,610 20,610
2,096 3,869
16,321
577
34,978
34,978
4.742 83,537 96.607
2.172 41.179
41,179
1.945 3.747 16,817
625
38,611
38.611
5,664
118.473 130.282
3.441 76.007 76,007
1.603
3.077 14,886
620
39.390
39,390
6,760 167,133 176,265
4,988 126,642 126,642
1,191
2,103
IT,235
580
38,388
38,388
20.4X 41.3% 34. IX
76.2X 104.7%
104.7%
-11.2% •9.6%
•4.9%
21.3%
11.1% 11.1%
SOURCE: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 2.4.4-5
2.4.4 Mechanical Product Type
Table 2.4.4-2
Mechanical CAD/CAM—Worldwide Application by Product Type
(Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone Revenue
Systems
Workstations
Kost-Depen^nt Revenue
SysteRS
Uorlcstations
Personal Cotnputer
Revenue
Systems
Workstations
11X 12X 9%
SIX 12X ^X
8X 76X 56X
2U 22X 18X
67X ^ 28X
12X 69X 54X
32X 35X 29X
53X 7X 23X
15X 59X A9X
46X 49X 43X
41X 4X 17X
t3X 46X 40X
61X 64X 58X
Z8X 3X 11X
11X 33X 30X
74X 76X 72X
1{» IX 6X
9X 23X 22X
SOt^CE; Dataquest
June 1986
2-4-4-6 © 1986 Dataquest Incorporated June CCIS Markets
2.4.5 Mechanical Turnkey Average Prices
This section includes Dataquest's forecasts and analysis of the average price per seat by product type for the mechanical turnkey segment. Figure 2.4.5-1 and Table 2.4.5-1 reflect these data.
• The average price per seat is dropping for all product types. The general trend in increasing functionality in hardware and software is raising the value of the average configuration, but not enough to offset the rapid reduction in prices for hardware components and software.
• In 1986, the average price per seat is expected to drop 14 percent in standalone products.
• From 1985 to 1990, the standalone product has the largest reduction in average price per seat, estimated at 15 percent.
• The personal computer-based product is expected to change the least, dropping only 6 percent over the five-year period from 1985 to 1990.
CCIS Markets © 1986 Dataquest Incorporated July 2.4.5-1
2.4.5 Mechanical Turnkey Average Prices
Figure 2.4.5-1
Mechanical Turnkey—Worldwide Average Price per Seat
Thousands of Dollars 140-
100-
80
40
20 j f
0 -
• Standalone
• Host-Dependent
A Personal Computer
tfiSS 1986 1987 1966 1989 1990
Source: Dataquest June 1986
2.4.5-2 © 1986 Dataquest Incorporated July CCIS Markets
2.4.5 Mechanical Turnkey Average Prices
Table 2.4.5-1
Mechanical Turnkey—Worldwide Average Price per Seat (Thousands of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types Standalone
Host-Dependent
Personal Computer
68.1 63.6
136.5 19.7
58.4
56.5
118.9
18.5
46.1 47.5
103.2
17.6
39.2
39.9
89.6 16.5
32.8 33.5 77.7
15.4
27.3 -ITX
28.1 -15« 67.5 -13X 14.1 -6X
Source; Dataquest
June 1986
CCIS Markets © 1986 Dataquest Incorporated July 2.4.5-3
•
2.4.6 Mechanical Revenue Source
This section includes Dataquest's forecasts and analysis of the mechanical market, segmented by source of revenue for each product type. Figures 2.4.6-1 Revenue and 2.4.6-1 Shipments and Tables 2.4.6-1 and 2.4.6-2 reflect these data.
• Hardware historically has represented the majority of system cost. Li fact, the cost was artificially higher than necessary to offset the undervalued software. The current trend toward value pricing and unbundling make comparisons more realistic.
• The distribution of hardware revenue varies by processor type. In 1985, the hardware revenue content has a range of 52 percent for the standalone system to 71 percent for the personal computer. Overall, 64 percent is the average.
• The software content is rising in all categories, with the low point as a percentage of revenue occurring in 1985.
• Standalone systems are expected to retain the highest value content in software, increasing to 41 percent in 1990.
• Service revenue is relatively constant, with more reliable systems being serviced by higher-cost, more experienced service personnel.
CCIS Markets © 1986 Dataquest Incorporated July 2.4.6-1
2.4.6 Mechanical Revenue Source
Figure 2.4.6-1 Revenue
Mechanical CAD/CAM—Worldwide Revenue Source by Product Type
Mifftons of Dollars
3200-
2800
2400
2000
1600
1200
800
400
• Hardware
• Software
A Service
t98S 1986 1987 1988 1990
Source: Dataqaeit June 1986
2.4.6-2 1986 Dataquest Incorporated July CCIS Markets
#
2.4.6 Mechanical Revenue Source
Table 2.4.6-1
Mechanical CAD/CAM—Worldwide Revenue Source by Product Type
(Millions of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types Hardware Software Service Total
Standalone Hardware Software Service Total
Host-Dependent Hardware Software Service Total
Personal Computer
Hardware
Software
Service
Total
1,714
579 383
2,677
154 106 34 294
1,402 414 345
2.161
158 59 4
221
2,058
763 445
3,266
359 250 80 689
1,415 405 358
2,178
283 108 8
399
2,387 1,035
530 3,952
654 473 153
1,280
1,328
402 366
2.096
405 160 12 577
2,688 1.396
658 4,742
1,075
825 273
2,172
1,182 390 372
1,945
432 181 13 625
2.937
1.876
852 5.664
1.615 1.353 473
3.441
903 334 366
1.603
419 188 13
620
3.138 2.481
1.141 6.760
2.165
2.043 780
4,988
591 251 349
1.191
382 187 12 580
Source:
13% 34% 24% 20%
70% 81% 87% 76%
-16%
-10% 0%
-11%
19% 26% 21% 21%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 2.4.6-3
2.4.6 Mechanical Revenue Source
Table 2.4.6-2
Mechanical CAD/CAM—Worldwide Revenue Source by Product TVpe
(Percent of Total)
19ffi t%6 T987 tW8 1989 1990
Alt Product Ty|M»s KardMare Software Service
Total
Standalone Karcbmre Software Service
Total
Kost-Dependent HsIrttore Software Service
Total
Personal CORiputer Harctore Software Service
Total
(AX 22X t4X 100X
52X 36% t2X toox
65% 19X 16%
100%
71X 27X 2X
1Q(»
63X 2SX 14X toox
52X 36X 12X
100%
65X 19X 16X 100X
71X 27X 2X
1WX
60X 26X I3X 100X
51X 37X 12X
1Q0X
63X 19X 17X 100X
7m, 28X 2X
100X
57X 29X 14X 100X
49X 38X 13X 100X
61X 20X 19X 1QQX
69% 29X 2X
10QX
S2X 33X 15X 100X
47X S9X UX toox
56X 21X 23X IQQX
68% 30X 2X
10C»
46X 37X 17X 100X
43X 41X t6X
1Q0X
SOX 21X 29% 100X
66% 32X n
\Qax
Source; l>ataq(M»t
iune 1986
2-4.6-4 © 1986 Dataquest Incorporated July CCIS Markets
2.5 Mechanical—Solid Modeling
Solid Modeling— More Than a Pretty Face
Source: Robot from "Brilliance," Robert Abel & Associates
Looking at realistic images is the first significant benefit derived from solid modeling. The images can represent an automobile, an airplane, or, in this case, a robot model used in a commercial. But, the value of pretty pictures is quickly overshadowed by the full potential of solid modeling in the manufacturing sector. Solid modeling is used to build computer models of existing parts for analysis and redesign, resulting in improved products. New design concepts can be tested in a fraction of the time that is required using manual methods. Solid modeling represents the next generation of modeling technology. It has proven to be effective in several application areas, but the full measure of its benefit will evolve over the coming decade.
The future of solid modeling depends on its ability to meet the total product description requirements of the manufacturing industries. The modeling needs vary by industry but the core issues are the same.
Can solid rnodeling provide a complete part description in a computerized data base that supports all the applications needed to operate the business? This service section answers this question by discussing the vendor and user viewpoints, and it provides insight into the current status of solid modeling. Our detailed forecast and analysis measures the expected progress of this exciting new technology.
DEFINITION
The first serious question to resolve is: What is solid modeling? Everybody believes a scale model carved from wood or plastic is in fact a solid model. The resulting model of the car, boat, building, or structure is a valuable conceptual design and visualization tool. Unfortunately, the physical model provides little
CCIS Markets © 1986 Dataquest Incorporated September 2.5-1
2.5 Mechanical—Solid Modeling
support for the detail design, documentation, or manufacturing process. Dataquest believes that solid modeling technology can solve these problems by building a model that is geometrically complete and provides the foundation to support a full array of CAD/CAM applications used throughout the design and manufacturing process. These two issues, completeness and the ability to support CAD/CAM applications, form the basis for comparison of all solid modelers. Limitations in either will restrict the utility of the system and the markets that can profitably use the system.
The next question of definition concerns the content of the electronic data base. It is physically impossible to store a solid object on a magnetic disk spinning at 3,600 rpm. What is stored obviously is a digital representation of the object or group of objects. The question then is: What information is required? The answer varies with the needs of the user and the application. For some, just seeing a color-shaded image of the new object provides a significant benefit. For others, a complete part description accurately describing every bump, hole, surface, and feature is required. This complete geometric part description can be combined with Other pertinent data to fully describe the manufacturing tolerances, material, processing, and cost parameters of the object. This implies a further ability to extract this data for all design, analysis, simulation, manufacturing, documentation, testing, and verification operations. The key benefit of solid modeling is derived from sharing a single part representation throughout the design and manufacturing process. Solid modeling is the first data base format that conceptually can provide this required level of functionality.
Providing all this in a package that is easy to use, fast, and reliable is the challenge being addressed by dozens of solid modeling developers. Understanding how to use these tools effectively as they evolve is the challenge facing the users. The competitive pressure to accurately design and build better products in a shorter time frame is driving the user industries toward CAD/CAM technology. Today, solid modeling is widely believed to be the best fundamental tool for the job.
HISTORY
The modeling process in computer graphics is growing through its third phase. The first phase began in the mid-1960s as a few straight lines on a storage tube display. These lines could represent just about anything from the circuit path on a printed circuit board to the object lines of a drawing. As the two-dimenslonal elements of lines and curves grew into three-dimensional wire-frame models, the mid-1970s saw the evolution of the second phase of computer-aided modeling. The second phase in the modeling process evolved as the design continued to grow in complexity, representing more and more information about the precise shape, size, and surface contour of the parts required.
2.5-2 © 1986 Dataquest Incorporated September CCIS Markets
2.5 Mechanical—Solid Modeling
Solid modeling represents the third step in the evolution of computer-aided modeling. All of the edges, surfaces, and holes of an object are knitted together to form a cohesive whole. The computer can determine the inside of the object from the outside. Perhaps more importantly, it can automatically trace across the object and readily find all intersecting surfaces and edges.
In the mid-1970s, various universities and industrial developers began to develop elements of this new modeling process. The PADL project from the University of Rochester is typical of some of these early systems. The essence of the approach uses well-defined, three-dimensional objects as building blocks. Various sizes of blocks and cylinders are added and subtracted from each other to form the desired part. This procedure is known as Constructive Solid Geometry (CSG). The set of primitive objects now includes cones, wedges, and several other regular-shaped objects. Boolean operators (union, difference, and intersection) and Other Operators are used to combine the objects. The advantage of this process is the fast description of the shape of the part and the ease of modification. Unfortunately, modeling the full range of part shapes is difficult if not impossible. Cast and forged parts with tapered sides and rounded corners are good examples of parts extremely difficult to model with the CSG approach.
Another form of solid modeler has evolved, called the Boundary Representation (B-Rep). In this process, every vertex, edge, and face is explicitly defined. The connectivity (topology) showing the relationship between each of these elements provides the glue to turn the list of elements into a geometrically solid object. This process is inherently more flexible but requires rigorous algorithms to guarantee the construction of a valid object. However, the easy access to individual surfaces for sampling or display is an advantage of B-Rep soiid modelers. Other conceptual approaches have been developed, such as Octree, but have not made significant impact as commercial systems.
The common expectation of today's solid modelers includes a variety of primitive objects with construction operations to form any free-form swept or sculptured shape. Most vendors are meeting this expectation by providing a hybrid or combination of B-Rep and CSG features. Users require Boolean operators to quickly join and shape the object, and easy part modification to support design iteration and revision.
VENDOR PERSPECTIVE
The Check-Off Box
A flurry of solid modeling products was introduced a few years ago that allowed the vendors to reply affirmatively to the question: Do you have solid modeling? Heightened media attention suggested the need to ask, even though the prospect probably did not understand why it was important. Today, a "yes"
CCIS Markets © 1986 Dataquest Incorporated September 2.5-3
2.5 Mechanical—Solid Modeling
response to the question is not enough. The expectations of the potential users have progressed, looking for a wide range of capabilities. The vendors have risen to the challenge and are in the process of developing next-generation products that meet the real needs of the user. Table 2.5-1 lists the solid modeling vendors and products that Dataquest currently tracks.
Table 2.5-1
Major Solid Modeling Vendors and Products
Company Name
Applicon Auto-trol Technology Corp. Automation Technology Products British Technology Group CAD AM Inc. Cadetron CADCentre CAEtec Software Inc. Calma Co. Catronix Corp. Cimlink Inc. Computervlsion Corp. Control Data Corp. CSA Cubicomp Corp. Daisy Dassault Systems USA Evans & Sutherland Computer Co. Ferranti Infographics GE-CAE Intemational/SDRC Gerber Systems Technology Inc. GMWC Gould Graftek Harris Corp. IBM Interactive Computer Modelling Inc. Intergraph Corp. Isykon Manufacturing & Consulting Services Matra Data vision Inc. McDonnell Douglas Mfg. Info. Systems Norsk Data Pafec Inc. PDA Engineering Perspective Design Ltd. Phoenix Data Systems Prime Computer Inc. Sperry Corp. Swanson Analysis Systems Inc. Tektronix Inc. Unicad
Product Name Solids Modeling II Series 7000 Solids Modeling CIMPLEX VOLE Solids Modeler (MAGI) Cadresolids PDMS PRO-SOLID GEOMOD CATSOLID Component Geometry Modeler MEDUSA (CIS), SOLIDESIGN ICEM Solid Modeler CS-5 PolyCAD 10 Gemsmith CATIA ROMULUS CAM-X ROMULUS GEOMOD GST-Solid RUCAPS Gemsmith Solid Modeling System HarrisCAD CADAM, CAEDS, CATiA GMS Solid Modeler PROREN OMNISOLIDS EUCLID UNISOLIDS TECHNOVISION Boxer PATRAN II MicroSolid Insight PRIME MEDUSA CIM/ME SOLID MODELER ANSYS PATRAN II M/P/E (Romulus)
Source: Dataquest Februarv 1986
2.5-4 1986 Dataquest Incorporated Septemb'er CCIS Markets
2.5 Mechanical—Solid Modeling
Making It Real
Some of the early product successes such as Geomod from SDRC/GE CAE-I, Euclid from Matra Datavision, and PADL from the University of Rochester proved the practical application of solid modeling. Conceptual design with improved visualization and accurate part properties for weight and mass have been the most successful application areas. Vendors are hard at work expanding the scope of solid modeling from a design tool to the basis for a corporate data base. The systems now in development will be used for everything from early conceptual design to final production and inspection. A serious effort to understand the scope of this task elicits respect for the system designers and programmers that are trying to make it happen.
The current stage in the evolution of systems used for conceptual design is mechanical computer-aided engineering (MCAE). The MCAE products combine enhanced modeling with improved analysis functions. On-line engineering reference documents and a user interface for the engineer are also getting development attention.
Niche Integration Versus Data Base Integration
Today, each of the top 10 mechanical CAD/CAM vendors has a solid modeling product. Dozens of others have, or are in the process of developing, their own products. The approach is different from vendor to vendor, but they fall into two general groups. The niche vendor approach capitalizes on an opportunity to focus on a vertical market and provide a high level of integration in a specific application area. The hope is to attract the user with special requirements, leading to higher-performance packages that are easier to use.
The system integrator approach is as broad as possible. By providing a complete package or a solid foundation for the total corporate graphics needs of a company, the vendor hopes to become the standard graphics tool supplier for the entire operation. As standards for communication improve, the opportunity for the system integrators and the niche suppliers to work together will improve as well. The combined synergy and competitive pressure in this environment will push product development to high levels in all application areas.
Dataquest believes that the niche developers will lead in developing innovative solutions in each of their application areas, but that the system integrators will be close behind taking advantage of any significant development. The major development areas have been identified as finite element modeling, analysis and optimization, numerically controlled part programming, drafting/documentation, and design verification. As market leaders emerge, strategic alliances will be formed to move the niche solutions toward integration as complete systems. This process would be aided considerably if standards were in place to define the format of data to share between unlike systems.
CCIS Markets © 1986 Dataquest Incorporated September 2.5-5
2.5 Mechanical—Solid Modeling
TECHNOLOGIES
Millions of dollars are being spent to improve performance, functionality, and user-interface operations. The following sections discuss the key technology development areas and identify their major features and current trends.
Modeling
The primary function of solid modeling is to give the user the ability to model completely any realizable object. Modeling development is being directed toward solving the deficiencies that limit the classes of parts that can be modeled. Castings, forgings, and sculptured pieces such as automotive body parts are the most common problem, areas. Making the part model more complete by more accurately capturing all relevant information in an easily maintained form is the key issue.
A current trend in making the systems easier to use is based on a modeling process that uses more complex primitive shapes called feature-based modeling. Rather than using blocks, cones, or cylinders to form the part, standard part features are used as part construction operations. Asking for a drilled, countersunk, and tapped hole in a single operation is an example of this process. An extension of this process generates complete standard parts. By filling in questions to a parametric program, standard gears, pulleys, or brackets can be modeled. Any of these procedures can be custom tailored for the user company to reflect established company practices or manufacturing constraints. The rapid construction of standard part features or standard parts can improve the productivity of the system. Feature-based modeling is a useful tool in moving solid modeling from a conceptual design to the mainstream of production design and manufacturing.
Adding tolerance data to the data structure is currently under study. Longer-term developments center on modeling manufacturing processes and functional test environments. Accurately modeling processes such as painting, plating, or heat treatment may or may not be necessary; however, the information describing the operation must be captured and maintained with the part data base. The complete part data base will support top-down part planning and bottom-up Operation planning.
Display
Fast image generation has been an Achilles heel for solid modeling. Rapid rotation and translation of view and part orientation is essential for interactive design tasks. Application-specific VLSI and display packaging designed for this market are just becoming available to speed up this process.
Fortunately, one of the most successful development areas associated with solid modeling has been display. Image generation has progressed from hours and days worth of computing time to fractions of a minute. Images include wire-frame, hidden-line, and shaded images in isometric, perspective, single, or multiple views.
2.5-6 © 1986 Dataquest Incorporated September CCIS Markets
2.S Mechanical—Solid Modeling
Application-Specific ICs and displays designed for this task are solving the problem. Display performance is improving by a factor of approximately two each year. In other words, a 10,000-polygon shaded image could be rotated and redisplayed in one second a year ago. Now, 20,000 polygons can be processed in the same time, or 10,000 in half the time. Products released in 1986 are expected to handle 40,000 polygons in a second or less.
Realism in display is available with shadows, multiple colored light sources, and textures. Longer term, both image quality and speed of generation will improve, approaching movie film for imaging dynamics and quality. Raster Technologies, Phoenix Data Systems, General Electric, and Silicon Graphics are leaders in the technology development of solid modeling display.
User Interfaces
Enhanced user interface options include pop-up menus, icons, command Strings, and programmable options for repeatable operations. The issue here is not so much, How is the interface presented?, as, Is it easy to use, self-teaching, predictable, reliable, and flexible enough to allow the construction of the necessary detail to accurately define the object for the foUow-on operations? Combining the functional need with the diversity of potential users and with the possibility of building in some rule-based logic to speed up the process will keep the system designers busy for years. User interfaces that are programmable and custom tailored for the user are rapidly becoming the common expectation.
Data Base
The full potential of solid modeling will not be realized until all applications can work from the same data base. The data base will include many different types of information, but there will be one representation for the part description with other data related to it. This process will accurately capture the engineering data base, defining the legal part description and archival record. Where-used and made-from questions can be answered directly. The volume of information associated with this data base is directly related to the level of design and manufacturing automation installed at that time.
Application Interfaces
For solid modeling to become fully accepted, it must support all the major application areas. The primary issue involves taking advantage of the more complete data base. Solid modeling cannot be treated as an add-on application. It must be built in to the core system where the application code can depend on the information being available for use. Virtually any application can be improved and, in some cases, fully automated if the solid modeling techniques are available.
CCIS Markets © 1986 Daiaquest Incorporated September 2.5-7
2.5 MechanicaI--Solid Modeling
CURRENT UNIVERSITY RESEARCH AND DEVELOPMENT ACTIVITY IN SOLID MODELING
Universities around the world have been working on solid modeling-related issues for the last fifteen years. Several commercial products have evolved from university development, with ongoing development in progress at dozens of sites. Table 2.5-2 lists the names of universities performing solid modeling research and development activities.
Table 2.5-2
University Research and Development Activity in Solid Modeling
University
Carnegie-Mellon Computer & Automation
Inst. Budapest Modbuild
Cornell University
Cranfield Inst, of Tech.
Czech Tech. Univ. Prague Federal Inst, of Tech. Zurich Helsinki Univ. Technology
Hokkaido Univ., Japan IBM U.K. Scientific Centre Kemforschungszentrum Karlsruhe Royal Inst, of Tech., Sweden Leeds University
Loughborough Univ. of Tech. Newcastle Polytechnic Norwegian Inst, of Tech./Sinteff
Politecnico di Milano Polytechnic of Central London Purdue University RPI Royal Inst, of Tech. Stockholm
Ruhr Univ.-Boehm Tech. Research Centre Finland
Tech. Univ. Berlin
Project Name*
Glide, BDS
Built t-Robotics Mosy
TIPS
Test Bed Modeler
JOE/GSFEL Euklid GWB
TIF/GSP Winsom Gipsy GPM Noname (Boxer)
SWANS (Leeds) -Assembled Plate Genus
Cadme --Octree GPM
Proren-2 Uniblock
ASP-GM Compac
Modeling
Modeling
Double quadratic surfaces
Motion synthesizer with movie interface
Auto generation and verification of NC
AI, process planning CAM-I AIS, form features
Modeling Modeling Modeling, kinematics,
and FEM generation Geometric simulator Organic molecule modeling Application interfaces Modeling Auto NC and FEM
generation CAM applications Form-feature data base Assembler welding
Modeling, kinematics, NC turning
CAD/CAM national project Modeling, tolerancing, NC Modeling, Modeling, ray tracing Modeling, sheet metal,
robotics, welding, Al Modeling Modeling, AI, FEM generation, kinematics
Modeling Modeling, interfaces, AI
Baustein Geometrie
(Continued)
2.5-8 1986 Dataquest Incorporated September CCIS Markets
2.5 Mechanical—Solid Modeling
Table 2.5-2 (Continued)
University Research and Development Activity in Solid Modeling
Tech. Tech.
Univ.
Univ.
Univ. Univ. Univ.
Univ.
Univ.
Univ.
University
Univ. Delft Univ. Denmark
of Bath
of Cambridge
of East Anglia of Edinburgh of Karlsruhe
of Michigan
of Rochester
of Tokyo
Project Name*
Raymo SEDA Technovision
(Compac) Vole, Dora
Build II
-Robmod Dicad Proren Architectural
System ASV PADL II
Geomap
Modeling
Ray tracing Modeling
Modeling Raycasling, NC,
modeling GKS graphics, autofeature
recognition, auto NC, robotics Solids/sculptured surfaces Robotics Modeling, AI
Architectural modeling
Feature extraction Object modeling Process modeling
and planning Free-form shapes, NC
•Project or product names shown in parentheses indicate affiliations between universities and commerical products.
Source: Dataquest February 1986
END USERS
The users of solid modeling technology come from virtually all industrial sectors. Table 2.5-3 indicates the major industrial sectors and the corresponding primary area of use.
Table 2.5-3
FrimaiT Solid Modeling Applications By Industry
Industry
Aerospace Automotive Architectural Mechanical/Fabrication Electro/Mechanical Mapping
Application
Conceptual design—visualization Design verification—packaging—visualization VisuaUzation Packaging—early design—analysis Packaging Subterranean modeling
Source: Dataquest February 19S6
CCIS Markets 1986 Dataquest Incorporated September 2.5-9
2.5 Mechanical—Solid Modeling
Earlier in 1985, Dataquest conducted a user survey of more than 600 user sites. This survey was designed to define the current status of the use of solid modeling and the future expectation of use by industry. Based on the total response, 24 percent of the site managers said they were using solid modeling on their systems. This does not mean that 24 percent of all system hours are spent on solid modeling, but it does mean that 24 percent of the users have access to solid modeling if they need it. An additional 39 percent said they plan to use solid modeling in the future, 21 percent have no plans, and 16 percent do not know. This sets the ratio of believers to nonbelievers in the current CAD/CAM user base at 2 to 1. The challenge will be to make the systems good enough to attract the nonbelievers of the current user base and to become the preferred choice of new CAD/CAM purchasers.
As Figure 2.5-1 indicates, aerospace has the highest level of installations by site, 39 percent. The high degree of complex new design work and a need for quality make the solid modeling systems attractive in the aerospace industry.
Architects have the highest ratio of current users who plan to use solid modeling. This 4.6 to 1 ratio shows a very large sales potential in the short term. Historically, however, architects have looked for functionality in a low-cost package, which may slow solid modeling penetration into this market.
Figure 2.5-1
ANALYSIS OF USER SURVEY SOLID MODELING USE BY INDUSTRIES
PERCENT
LEGEND
^ S NO PU\NS
Y///A DON'T KNOW
• 1 HAVE PLANS
USING NOW
TOTAL AUTO MECHlFAB MAPRNG
AERO ARCH ELEC/NECH
Source: Dataquest February 19S6
2.5-10 1986 Dataquest Incorporated September CCIS Markets
2.5 Mechanical—Solid Modeling
Mappers have the smallest level of interest in solid modeling by current users and those with plans to use it. It is worth noting that this group provides a good example of a vertical niche market. The portion of mapping that works with three-dimensional data obtained for subterranean modeling, mining, or oil exploration could benefit from solid modeling.
PENETRATION
Determining market penetration requires market sizing and setting the level of installed product. As always, definitions are necessary to put the data in proper context. Long term, Dataquest expects the potential solid modeling market to include 100 percent of mechanical and 80 percent of AEC markets. For this potential to be realized, solid modeling will be required to support all CAD/CAM applications as well as or better than they are supported today by wire-frame and surfacing technology.
Since today's systems use solid modeling as an add-on application or as a core system function, it is difficult to determine the level of use at the workstation level. The 1985 Dataquest User Survey was used to set the current level of usage on a per-site basis. Roughly 25 percent of the CAD/CAM user sites responding to the 1985 Dataquest User Survey were using solid modeling. This corresponds to more than 17,400 workstations installed worldwide with full or part-time access to solid modeling in 1984. Dataquest believes that market penetration by site will increase from approximately 25 percent in 1984, to 53 percent in 1989. An estimated 79 percent unit growth rate in 1985, forecast to increase to 101 percent in 1989, is responsible for the expected doubling of market penetration on a per site basis.
Penetration considering terminal hours used with direct access to a solid model data base is growing at a faster rate. The rapid transition of solid modeling as a core system function is the primary reason for this accelerated growth rate.
USER ISSUES
To live up to its full potential, solid, modeling must pass an impressive set of hurdles. Functionality, ease of use, and price are some of the most significant barriers. The following segments discuss these issues from a user perspective, indicating the needs and level of expectation.
CCIS Markets © 1986 Dataquest Incorporated September 2.5-11
2.5 Mechanical—Solid Modeling
Functionality
The basic solid modeling procedure uses a variety of standard objects as primitives, adding or subtracting them from each other to form the desired part. The current flexibility of this process will allow the precise modeling of fully machined parts. Increasing the complexity of parts by including castings, forgings, molded, and formed parts, however, adds a level of difficulty that few solid modelers can address. Adding the constraint of building these complex models in a reasonable time frame is another major hurdle.
After building the model, the immediate question arises, "What can be done with it?" The first useful application is to look at it. The visualization process has virtually been solved from a functional view. The engineer can be his own artist and easily produce full color rendered images. Technical illustrations can be displayed that include line drawings in perspective, with hidden lines removed. Accurate, detailed sectioned views can be generated for use in design studies or for detail drawings. Still ahead are improved algorithms and special-purpose hardware that will produce images faster, with more realism and more user control, but at a lower cost.
Building two or more parts that fit together adds another dimension of complexity. Evaluating the nominal fit, mass properties, interferences, and relative motion in mechanism are all significant elements of required functionality. Each of these functions is currently available in various forms of utility and ease of use. Building large assemblies with more than a thousand components is difficult if not impossible. Complex products or structures can easily have tens of thousands of parts. Configuration management of these large structures must be available. New techniques to allow the interactive use of these large data bases is essential.
The classic major application areas of CAD/CAM must be supported by solid modeling. These are finite element analysis, numerical control part programming, and documentation. Each area can t£ike advantage of the more complete part model and produce precise results in a more automated, easier-to-use scenario. Rule-based procedures will complement the operation, giving the user more time to think about his problem and less time to worry about the steps he needs to follow to make it happen.
Dimensional tolerancing associated with solid modeling is a long-term functionality with exciting potential. Today, edges, holes, and profiles are stored in computers with one value for each component or feature. Allowing a multiple value or a range of values for each of these dimensions opens the door for more complete design evaluation, for manufacturing process optimization, and automated testing for quality assurance.
2.5-12 ©1986 Dataquest Incorporated September CCIS Markets
2.5 Mechanical—Solid Modeling
Solid modeling will provide an efficient base for geometric part data in corporate data bases. Access, format, control, and definition are a few of the major issues involved in using such a data base. By definition, a corporate data base must be accessible to anyone with a legitimate need for business information. Controlling the level of access to each of the functional groups or individuals is a nontrivial task, but it is essential in order to support the full level of communication requirements in industrial automation. Today's CAD/CAM products address the issues of local data bases and local area networks. The tools are just beginning to be available to put together large corporate data bases.
Standards are an essential ingredient in this scheme. Creating a format to capture the essence of product design and manufacturing information is the formidable task of several standards organizations. ISO/TCI84-SC4, CAM-I/AIS, ANSI/Y14.26, DIN/TAP/VDA, AFNOR-SET, and EEC-ESPRTT are leaders in this worldwide effort. An in-depth look into this area will be the topic of a future research newsletter.
Users are asking for complete application integration as one of the most important components of a solids-based system. Unfortunately, asking ten users for a functional definition of a well-integrated system gets at least ten answers. From Dataquest's current point of view, the most important solid modeling applications are:
• Finite element mesh generation and analysis
• Numerical control part programming
• Drafting and documentation
• Dimension tolerancing and analysis
• Design verification by interference detection
• Visualization
• Mass properties
As the quality and quantity of part geometry and associated information improves, thus defining a fully operational data base, the emphasis will focus on the flow of information and where it is used. Information integration is the primary goal tying organizations into a single business unit.
CCIS Markets © 1986 Dataquest Incorporated September 2.5-13
2.5 Mechanical—Solid Modeling
Performance
The essential element of performance is to retain the interactive nature of the system, independent of the complexity involved. Every system operation, user interface, functionality, or output process has a performance element. Consider two highly functional systems, one interactive and responsive, the other batch-oriented and ponderous. The first is a powerful design tool; the second is a laboratory curiosity. Blinding speed has been the dream of solid modeling practitioners since the first Boolean operation. The current rapid progress in computing horsepower and display processing are having a positive effect. But the general problem is far from being solved.
A close look at a realistic design problem illustrates the true need. Routing a hose through the engine compartment of an automobile and designing the necessary clamps and fittings can take weeks, working from engineering drawings. Considering the effect of a simple modification to one of the parts or the diversity of engine options increases the complexity by an order of magnitude. Using a solid representation of the assembly with interactive performance would shorten the job to a few hours. Simulating the design process allowing fly-around display performance with models having thousands of parts is a real expectation of automotive, aerospace, and heavy industrial designers around the world.
In the example cited above, moving to a new location to see a fresh vantage point can require minutes or even hours with today's systems. The user needs less than one-second image redisplay time.
Subtracting one shape from another is a powerful modeling operation. Waiting more than a few seconds to see the result is frustrating and counterproductive.
Productivity
Productivity can be measured in many ways. Completing a measured task in half the time or less is understood to be productivity improvement. Completing a task that has never been done or never been possible to do, is difficult to quantify for productivity improvement. If the task is important, productivity is infinitely improved. Solid modeling opens the door for both types of productivity improvement.
The major ease-of-use issue relates directly to productivity. What percentage of the user's time is spent thinking about how to make the system do what he wants versus the time spent working directly on the problem? Dataquest believes that this ratio needs to be greater than 90 percent.
Assisting design or manufacturing applications is a primary function of solid modeling. What is the level of application integration? How much time is required to set up each operation? If the task requires a drawing to be generated, what convolutions are required to get the correct views on the paper? What happens to
2.5-14 © 1986 Dataquest Incorporated September OCXS Markets
2.5 Mechanical—Solid Modeling
the drawing when the design is updated? Who is notified when engineering makes a change? A system approach to the above will profoundly improve the communication and productivity of the user's organization.
Ease of Use
Casual users who spend less than two hours per day on a system are the target for the designers of user interfaces. These users need to have a little handholding on each excursion into the land of computer-aided design and manufacturing. They do not want to be slowed down by menu structures or lengthy procedures of small, "easily understood" command steps in the name of ease of use. On the other hand, they do need assistance in knowing what to do next. This is fertile ground for real innovation in system design.
A key element of ease of use is providing a self-teach mode of operation. Ideally, the system could monitor the progress of the user and make suggestions for independent study or present tutorial sessions for the learning of new or revised functions.
Price
The performance and display requirements for most solid modeling applications force the use of high-end hardware packaging. Typically, the cost per terminal hour is between $20 and $30. Each potential user will need to evaluate the current level of functionality for proper application to his problem. For some users, the potential benefit could be a bargain at $100 per hour. For the rest, a wait of a year or two will make the difference.
Trends
Exaggerated vendor claims with high-level media coverage have produced overly optimistic expectations. This will continue due to the extremely competitive nature of this business and due to misunderstandings in dealing with the complex issues.
Conceptual design using solid modeling technology has proven to be effective. Most short-term enhancements will evolve from this foundation.
The availability of the low-cost, high-performance drafting solution is good and bad for solid modeling developers. The good news is that an expensive system does not need to be tied up doing drafting. Developing a complete interface between the solid modeling design system and the high-performance, low-cost drafting system will solve the drafting application need. The bad news is that the user now has the choice: Does he buy three or four drafting systems, or does he buy one solids-based design system? Dataquest estimates that more than half of the total available mechanical CAD/CAM system hours are used for drafting. The current
CCIS Markets © 1986 Dataquest Incorporated September 2.5-15
2.5 Mechanical—Solid Modeling
users of three-dimensional design systems can off-load their drafting tasks to the new low-cost systems and free up already purchased design stations. Considering the availability of terminal hours, trained users, and established procedures, this could slow short-term demand for design systems.
MARKET FORECASTS
Dataquest's worldwide solid modeling market forecast is shown in Table 2.5-4. The revenue total represents software-only revenue for solid modeling packages and application software that depends on the solid modeling process. This represents a larger market than the modeling-only market, but more accurately presents the true impact of this technology on the CAD/CAM industry. Revenue from both bundled and unbundled suppliers are included in the 1985 analysis, and both sources are considered in the forecast. The actual units specified represent the number of systems and workstations required to operate the software. The expected drop in average system selling prices and the transition of solid modeling from an add-on application to a core system function have been considered in this forecast.
Table 2.5-4
Forecast Solid Modeling Market by Product Type Software Only Revenue
(Millions of Dollars and Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Revenue
Systems
Uorkstations
Standalone
Revenue
Uorkstations
Host'Dependent
Revenue
Systems
Worlcstations
Personal Computer
Revenue
Workstations
$97 1,331
3,572
$13 474
$84 839
3,080
$.1 18
$134
2,981
5,616
$36 1,600
$98 1,197
3,832
$.8 183
$193
6,290
9,650
$80 4,141
$109
1,355
4,715
$3.5
794
$299
13,243
17,366
$169
10,008
$122
1,494
5,618
S7.7
1.740
$455
26,420
30,733
$323 21,537
$118 1,419
5,731
$15.1
3,465
$675
47,313 51,216
$554
41,219
$100
1,165
5,068
$21.2
4,928
Source:
47.5%
104.2X
70.3%
112.7%
144.2%
3.7%
6.8%
10.5%
173.1%
208.5%
Dataquest July 1986
2.5-16 © 1986 Dataquest Incorporated September CCIS Markets
2.5 Mechanical—Solid Modeling
The solid modeling market forecast by region is shown in Table 2.5-5.
Table 2.5-5
Solid Modeling Market Forecast by Region
(Millions of Dollars and Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Worldwide
Revenue Systems
Uorkstatforra
North America Revenue
Systens
Workstations
Europe
Revenue
Systems
Workstations
Far East
Revenue
Systems
Workstations
Rest of World
Revenue
Systems
Workstations
$97 1,331
3,572
S54 692
1,618
$29 409
1,144
S12 209 746
$2 22 64
$134
2,981
5,616
$75 1.547
2,538
$41 927
1,820
$16 461
1,161
$2 46 96
$193
6,290
9,650
$107
3,242
4,328
$60 2,000
3,196
$23 954
1,967
$3 94 160
$299
13,243
17,366
$165
6,786
7,736
$94 4,277
5,838
$35 1,982
3.505
$4 197 287
$455
26,420
30,733
$251
13.459
13,599
$145
8.612
10.423
$53 3,955
6.203
$7 394 508
$675
47,313
51.216
$370
23,961
22,508
$216
15,517
17,473
$79 • 7,106-
10,362
$10 729 872
47.5%
104.2%
70.3%
46.8%
103.2%
69.3%
49.6%
107.0%
72.5%
46.0%
102.5%
69.3%
45.7%
101.7%
68.4%
Source: Dataquest July 1986
MARKET SHARE ANALYSIS
The three groups of companies profiled in Table 2.5-6 indicate market share analysis by vendor and number of installed workstations with access to the named product. The level of utilization of the solid modeling product or module is expected to range from often to full-time. Group A represents vendors with established solid modeling products in production in many user organizations. Group B includes emerging products by well-known vendors or second sources for third-party software products. Group C includes the newest entries with just announced products or products in beta test. Some of the latest technology can be found in these products.
CCIS Markets © 1986 Dataquest Incorporated September 2.5-17
2.5 Mechanical—Solid Modeling
Table 2.5-6
SOLID MODELING MARKET SHARE ANALYSIS
Company
Group A Applicoh CADCentre Computervision Corp. Control Data Corp. SDRC IBM MAGI Matra Datavision Inc. McDonnell Douglas Mfg. Info. Systems Prime Computer
G r o u p B Auto-trol Technology Corp. Calma Co. Evans & Sutherland Computer Co . Ferranti Infographics GMWC IBM Mantifacmring St. Consulting Services
Group C Automation Technology Products British Technology Group Cimlink Inc. CAEtec Software Inc. CAD AM Inc. Catronix Corp. Cadetron Cubicomp Corp. CSA Daisy Gerber Systems Technology Inc. Graftek Gould Harris Corp. Hewlett-Packard IBM Interactive Computer Modeling Inc. Intergraph Corp. Isykon Norsk Data Pafec Inc. PDA Engineering Perspective Design Ltd. Phoenix Data Systems Sperry Corp. Swanson Analysis Systems Inc. Tektronix Inc.
Product
Solids Modeling II PDMS MEDUSA (CIS), SOLIDESIGN ICEM GEOMOD CATIA Synthavision EUCLID UNISOLIDS PRIME MEDUSA
Series 7000 Solids Modeling GEOMOD ROMULUS CAM-X ROMULUS RUCAPS CAEDS OMNISOLIDS
CIMPLEX VOLE Component Geometry Modeller PRO-SOLID Solids Modeler (MAGI) CATSOLID Cadresolids CS-5 PolyCAD 10 Solid Modeler Gemsmith GST-SoUd Solid Modeling System Gemsmith HarrisCAD SMD-Solid Modeling Design CADAM GMS Solid Modeler PROREN TECHNOVISION Boxer PATRAN II MicroSolid Insight CIM/ME SoUd Modeler ANSYS PATRAN II
Notes: Group A contains companies with products installed on more than 500 workstations. Group B contains companies with products installed on more than 100 workstations. Group C contains companies with products in development, in beta test, or recently released with up to 100 workstations installed.
Source: Dataquesc July 19S6
2.5-18 1986 Dataquest Incorporated September CCIS Markets
2.5 Mechanical—Solid Modeling
DATAQUEST ANALYSIS
The Promise
The promise of real-world simulation in a computer system conjures visions of electronic sculpting and forming with the ease of hands on clay. The designer's eye gazes upon the full color shaded images and sees a new product evolve from an idea to a tested concept in an afternoon. The promise of products optimized for performeince and quality will result in improved profitability for the company. The full realization of this promise will revolutionize the industrial sector.
The Wait
Remarkable progress has been made in turning promise into reality. Niche markets have demonstrated many of the concepts, proving their feasibility. Conceptual design has been the most successful niche market, proving the effective combination of solid modeling and analysis. Close integration with other design and manufacturing applications are in development. The future of solid modeling is directly dependent upon the successful implementation of the fully integrated system; the add-on approach will not serve the real needs of the user. The application packages must be able to depend on the availability of solid modeling information to reach the next plateau of system performance and functionality.
The Winners
The person, group, department, division, and/or company that understands the effective use of solids-based CAD/CAM will have a basic competitive advantage over the nonusers. Products that are produced from CAD/CAM systems based on solid modeling and on the application packages that take full advantage of the technology will be more competitive, more reliable, less costly, and more profitable. Solid modeling is making the mechanical CAD/CAM business exciting again.
CCIS Markets © 1986 Dataquest Incorporated September 2.5-19
2.6 Mechanical Computer-Aided Engineering (MCAE)
MCAE-KEY TO HIGHER CORPORATE PROFITABILITY
Corporate
Pro ifQloility I 1
Source: DATAQUEST August 1986
INTRODUCTION
Mechanical computer-aided engineering (MCAE) is moving into center stage as a main character in the evolution of CAD/CAM. Esoteric analysis and mediocre modeling methods are evolving toward highly functional engineering tools, using the latest in high-performance graphics display and computation. Because MCAE technology is changing the way that the world designs its products, it must be considered by every major manufacturing corporation. The ability of a company to remain profitable will depend more and more on its ability to effectively use MCAE technology. MCAE is a major key to higher corporate profitability.
The purpose of this service section is to provide a background of information describing the history and expected evolution of this important and growing segment of the mechanical CAD/CAM application. The market forecast is given with the supporting significant trends and assumptions. A perspective on driving issues is presented with analysis. Highlights from the section with an overall analysis are found in the concluding Dataquest analysis. Please review the following definitions to confirm the scope of this analysis.
CCIS Markets 1986 Dataquest Incorporated September 2.6-1
2.6 Mechanical Computer-Aided Engineering (MCAE)
DEFINITION
Mechanical computer-aided engineering (MCAE) has a broad range of definitions, depending on the mechanical application and type of user. A full understanding of the MCAE process should consider all software packages that an engineer or designer would likely incorporate in the everyday use of his workstation. Spreadsheets, word processors, and electronic mail are a few of the major applications outside of engineering graphics that are commonly required to improve the productivity of the designer or engineer.
In general, the largest MCAE effort is directed toward product design, but an important and growing application group includes use of MCAE tools for manufacturing support in the form of design and analysis for tooling, molds and dies, fixtures, material handling equipment, or packaging. The MCAE application in this analysis is limited to the computer graphics tools that have been developed to aid the product design and analysis process, separate from documentation or manufacturing tasks. Software for supporting administration or management tasks is not included.
The design and analysis activities supporting the product design and analysis process exist in two major areas: conceptual design and detail product design, more commonly referred to as computer-aided design (CAD). The functional requirements of conceptual design and detail product design are alike, with growing similarity. The need to share information back and forth between these operations is pushing the requirements even closer. This trend in evolution of common interface, sharing of data, and functional commonalty is the basis for combining the products and markets of conceptual design and CAD, calling the result mechanical computer-aided engineering.
DRIVING FACTORS
Early Design Optimization
The design engineer is the primary individual affecting the design process from early conceptual proposal throughout production of detailed plans ready for transfer to manufacturing. This process of design evolves through many stages, depending on product complexity. A common thread is evident across many industries. As the first 5 percent of time and dollars are spent in the product development process, 85 percent of the total life-cycle costs are committed. In other words, the most critical product design decisions are made during the earliest stage of design effort. This data was reported from British aerospace and has been echoed as typical from many manufacturing operations. Figure 2.6-1 illustrates this trend in cost commitment in the product development process.
2.6-2 © 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
Figure 2.6-1
Cost Profile Of Development Process
Cost
Product Life-Cycle Cost ComITiltted
Development Time and Cost—As Spent
Time
Source: SDRC Dataquest August 1986
The two biggest problems with this traditional approach to product development are the following:
• The greatest opportunity to affect the design is given up after expending only 5 percent of design effort.
• Because of the analysis and test activities that take place later in the process, major design problems often do not show up until later; by then it may be too late to implement an optimal design change.
Cost of Engineering Change
Another way of visualizing this commitment to cost over time is to consider the estimated cost of a design change at different stages in the product life cycle. The following breakdown illustrates approximate costs for engineering changes at each stage:
Cost of an engineering change:
• In drawing board stage-—$1
• In design checking—$10
CCIS Markets 1986 Dataquest Incorporated September 2.6-3
2.6 Mechanical Computer-Aided Engineering (MCAE)
• In process planning—$100
• In manufacturing engineering—$1,000
• In final production—$10,000
• After field failure—$100,000 or more
The real objective of MCAE was succinctly given by Brad Morley, Vice President of Product Development at SDRC, during the 1986 Dataquest Lidustry Conference. "The real objective of MC/iE," said Mr. Morley, "is in providing technology to the design engineer up front in the product development process when there is the greatest opportunity to affect the product design, while, at the same time, providing tools which allow for the effective evaluation of many different design concepts during the early stages of product development when the cost per change is least expensive."
Implementation Cost
The above issues of early design optimization and cost of engineering change have always existed. Another limiting factor in the expansion of MCAE is directly related to high cost of implementation. Low-cost systems will fuel growth of MCAE because the largest market is comprised of casual users with less sophisticated requirements. Higher-performance systems will also lower the effective cost, putting more powerful systems in the hands of the experienced user.
Access
The issue of access is critical to the future of MCAE and CAD/CAM in general. Every time an interface is created between manual methods and automation, an inefficiency is introduced. Hopefully, the islands of automation more than compensate for the overhead of a partially automated process. The complete benefit of design and manufacturing automation cannot be realized until everyone with a need has ready access to a workstation. MCAE can be seen as an enabling technology automating a large and important segment of the overall manufacturing process.
HISTORICAL PERSPECTIVE
The design and analysis activities associated with MCAE have evolved from two distinct approaches with very different software functionality and different typical users. The common company requirements of design verification and analysis are driving the development of both approaches toward a similar
2.6-4 © 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
functionality and a larger target market. Recently a third development path has surfaced with a viable success opportunity.
Evolution of MCAE from Turnkey Vendors
The first step in MCAE development came as an outgrowth of computer- aided design and drafting, or CAD. In this context, MCAE is design and analysis primarily by 3-D, wireframe modeling techniques but includes 2-D modeling and 3-D surfacing modeling for design and analysis. The early market share leaders in CAD/CAM—such as Computervision, Applicon, Calma, Autotrol, McDonnell Douglas, and Cadam—are good examples of vendors with wireframe-based MCAE tools. A Dataquest end-user survey indicates that a majority of current design and analysis activities are accomplished with these tools.
In general, the CAD approach has evolved from early drafting applications and, as a result, has retained a detail design focus. The strengths of this focus provide robust component design and analysis with an emphasis on proper fit of mating surfaces in assemblies. Typically, analysis ranges from simple clearance measurement between two parts in an assembly to kinematic evaluations of assemblies.
The modeling function to support CAD design and analysis activity is evolving toward solid modeling implemented as a core system function. The effects of this more complete modeling tool will enhance the performance, ease of use, and range of effective applications as solid modeling product developments are turned into effective tools.
Evolution of MCAE from Advanced Analytical Software Vendors
The second path of MCAE development started in component design analysis with strong dependence on finite-element techniques. MacNeal-Schwendler, PDA Engineering, SDRC, and Swanson Analysis are good examples of the early leaders in finite-element modeling and analysis (FEM/FEA). Part analysis after failure in the field was the most typical use of early FEM/FEA software. As batch mode processing and tedious digitizing input processing gave way to more automated operation, the design analysis tools gained wider acceptance. An increasing volume of analysis was performed before the actual part or assembly was constructed. The time saved in finding a major problem at this early stage of product development was found to contribute sizable savings in time and expenses. As conceptual design improved in performance and price, it became a proven, useful analytical tool.
The need to improve the modeling function to support the analysis operation has promoted the use of 3-D modeling techniques, with solid modeling becoming the preferred modeling method. Solid modeling includes the opportunity to automate the finite-element meshing operation, optimizing the design with recursive
CCIS Markets © 1986 Dataquest Incorporated September 2.6-5
2.6 Mechanical Computer-Aided Engineering (MCAE)
analysis/modification. As with the turnkey vendors, solid modeling is becoming the modeling technique of choice.
The Latest Approach—MCAE as the Engineer's Tool Box
Most recent MCAE developments have taken a new path. The target market is focused on the casual user as engineer or designer. Electronic reference handbooks, sketch-mode data entry, solid modeling, design analysis, and project management tools are mixed together in a variety of cost/performance packages. Several companies have released products or will release products in the near future using these features combined with established modeling and analysis functions. Aries and Cognition are notable vendors of products aimed at the user with full-time custody but part-time operation of MCAE.
Artificial intelligence, computational, and data base servers are playing an important role in improving the usability and performance of the part-time MCAE resource. The vendor move to capture the engineer's desktop will proceed along the price/performance battle line well into the 1990s.
VENDOR PERSPECTIVE
MCAE Vendors—Who Are They?
Depending on the marketing focus of the vendor, some may or may not believe that they are involved in the MCAE market. As always, definitions are everything in sizing the market and measuring the major players. The Dataquest definition states, "If a system can perform design and/or analysis of mechanical components, it can qualify as having an MCAE functionality." With this definition in mind, an evaluation can be made of the more than 500 worldwide CAD/CAM vendors to determine the population of MCAE vendors. The list developed from the Dataquest Who's Who in CAD/CAM data base is shown in Table 2.6-1. More than 100 MCAE vendors are listed, along with an indication of product features.
The top ten MCAE vendors have been evaluated, with the results presented in the market share analysis section. The mechanical turnkey CAD/CAM vendors dominated the list, taicing six of the top ten positions. Software-only vendors focusing on design and analysis applications comprised the remaining four positions. The "Other" group that makes up only 10 percent of the MCAE market is comprised of a long list of vendors.
2.6-6 © 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
Table 2.6-1
Worldwide MCAE Vendor and Feature Matrix
VENDOR NAIi4E
4-D GRAPHICS, INC. ALGOR INTERACTIVE SYSTEMS, INC AMERICAN COMPUTERS k ENGINEERS. INC ANDROMEDA SYSTEMS, INC. APRLICON ARIES TECHNOLOGY ASAHI OPTICAL CO., LTD. AUTO-TROL TECHNOLOGY CORP. AUTOMATION TECHNOLOGY PRODUCTS BRIGHAM YOUNG UNIVERSITY. BROOKS SCIENTIFIC CADAM. INC. CADCENTRE LTD. CADETRON, INC. CALMA CO. CAV CORP. CELESTIAL SOFTWARE, INC CIMLINC, INC CISIGRAPH COADE COGNITION, INC COMPUTERVISION CORP. CONTROL DATA CORP. COUNTING HOUSE COMPUTER SYSTEMS LTD. CUBICOMP CORP. CYMBOL CYBERNETICS CORP. DAKOTA CADWORKS DASSAULT SYSTEMES DELTACAM SYSTEMS LTD. DYNACOMP, INC ENERTRONICS RESEARCH, INC ENGINEERING COMPUTER SERVICES ENGINEERING MECHANICS RESEARCH ENGINEERING METHODS, INC ENGINEERING SYSTEMS CORP. EVANS Ic SUTHERLAND COMPUTER CORP. FERRANTI INFOGRAPHICS LTD. FUJITSU, LTD. GERBER SYSTEMS TECHNOLOGY, INC GRAFTEK H.G. ENGINEERING LTD. HAKUTO CO., LTD. HARRIS CORP. HEWLETT-PACKARD CO. HITACHI ZOSEN INFO. SYSTEMS CO. HITACHI. LTD. HONEYWELL INFORMATION SYSTEMS IBM ICAT INNOVATIVE COMPUTER-AIDED TECH, INC INTERACTIVE COMPUTER MODELLING, INC INTERGRAPH CORP. INTERNATIONAL COMPUTERS LTD. ISYKON SOFTWARE GMBH KANEMATSU ELECTRONICS, LTD. KINTECH, INC KONGSBERG
SURFACES
X
X X X X X X
X X X X X X X X
X X X X X X X X
X X
X X X X X X
X X X X X X X X X
X X X X
X
MODELING
X X X X X X
X X X
X X
X X X X
X X
X
X X X X X
X X X X X X X
X X X X X
FEM/FEA KU
X X
X X X X
X X
X
X
X X X X X
X
X
X X X
X X X X X
X X
X X
X X
X
JEMAT
X X X
X
X
X
X X X
X
X
X
X
X
X
X
X X
(Continued)
CCIS Markets 1986 Dataquest Incorporated September 2.6-7
2.6 Mechanical Computer-Aided Engineering (MCAE)
Table 2.6-1 (Continued)
Worldwide MCAE Vendor and Feature Matrix
VENDOR NAME
MACNEAL-SCHWENOLER CORP. MAGI, CAD/CAM DIVISION MANUFACTURING T CONSULTING SERVICES MARC SOFTWARE INTERNATIONAL, INC MARUBENI HYTECH CO., LTD. MATRA OATAVISION, INC MCCLINTOCK CORP. MCDONNELL DOUGLAS MFG. INFO SYSTEMS MERLIN TECHNOLOGIES, INC MICRO AIDED ENGINEERING MICRO CONTROL SYSTEMS MICROCAO LTD. MITSUBISHI ELECTRIC CORP. MITSUI ENGINEERING I: SHIP. CORP. MOHANGO, INC MUTOH INDUSTRIES, LTD. NEC CORP. NESTLER ELECTRONICS GMBH NIHON DIGITAL EQUIPMENT CORP. NIPPON UNIVAC KAISHA, LTD. NORSK TECHNOVISION (DIETZ) NUMBER CRUNCHING MICROSYSTEMS, INC PACE SYSTEMS, INC PAFEC ENGINEERING CONSULTANTS PDA ENGINEERING PISCES INTERNATIONAL CO. PM INTERNATIONAL PRIME COMPUTER JAPAN, LTD PRIME COMPUTER, INC RIKEI CORP. ROBCAD U.S.A. SEIKO INSTRUMENTS Ic ELEC . LTD. SHAPE DATA LTD. SIEMENS AG SPERRY CORP. STRESS ANALYSIS ASSOCIATES. INC STRUCTURAL DYNAMICS RESEARCH CORP. STRUCTURAL RESEARCH k ANALYSIS CORP. SUMISHO ELECTRONICS CO. SUMMIT CAD CORP. SWANSON ANALYSIS SYSTEMS, INC TASVIR CORP. TEKTRONIX, INC TELEMECANIQUE TOSHIBA CORP. TOYO INFORMATION SYSTEMS. LTD. UNICAO. INC UNITED INFORMATION SERVICES. INC UNIVERSAL INTERGRAPHIX CORP. YOKOGAWA HEWLETT-PACKARD. LTD. YOKOGAWA HOKUSHIN ELECTRIC CORP. ZUKEN. INC
3-D WIREFRAME SURFACES
X
X X
X
X
X X
X X
X X X
X
X X X
X X X X
X
X X
X X X X X X
X X X X
SOLIDS MODELING
X X
X X
X
X
X X
X X • X X X X
X
X X X X X X X X
X
X
X
X
X X X
X
X
FEM/FEA
X
X X X X X X X
X X X
X X
X X X X X X X X x'
X X X X X X X
X
X X
X
X X X
KINEMATICS
X X
X
X X
X X
X
X X X
X X
X
X X
X
X
Source: DATAOUEST August 1986
2.6-8 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
The Development Path
Conceptual design and detail product design are evolving into a cohesive evolutionary direction for MC/^ . Specifically, Dataquest expects MCAE to form the backbone of manufacturing corporate data bases by developing the primary CAD/CAM tool to create and update engineering information. Within this framework, a great variety of vendor offerings will be derived from the combination of target markets as defined by industry and user, with hardware and software products in several price/performance packages. A prevailing hypothesis in the industry expects every engineer, designer, and technician to have an engineering workstation installed on his or her desk. Vendors are trying to develop the right combination of tools to gain maximum acceptance on the desktop.
Integration—Now or Later?
If a group of users is asked to list the top five areas of concern, the first or second issue listed is usually integration. A reasonable second question, then, is: "What do you mean by integration?" If there are 50 people in the group, you will most likely get 50 different answers. A typical response will include phrases like common data base, uniform user interface, and upgradability. A pragmatic respondent would ask first: "Can I get my job done?" The second question would be: "What is the effort required?" This ease-of-use and functionality resolution determines the suitability of all MCAE tools to be used by the target market. Integration can and should be evaluated at the user, group, and corporate levels. For each member of a well-integrated system, the questions are the same: "Can I do the job, and is it worth the effort?"
MCAE has focused on the design and analysis task, bringing a closely integrated tool to a wide variety of potential users. The type of user in each target market is driving MCAE development as much as any other single factor. The esoteric specialty MCAE tools developed for Ph.D.s in crucial tasks differ significantly from the part-time design aid for the designer or technician.
Looking beyond MCAE, integration of MCAE tools must be closely allied with the Other major CAD/CAM functions of documentation and manufacturing. The full benefit of CAD/CAM will not be realized until a fully integrated solution can be implemented with complete access by all involved. The implication here predicts CAD/CAM access to become as common as talking on the telephone. MCAE in this context will meet the total design and analysis requirements of the user, group, and corporation.
CCIS Markets © 1986 Dataquest Incorporated September 2.6-9
2.6 Mechanical Computer-Aided Engineering (MCAE)
TECHNOLOGIES
Virtually all technologies important to the CAD/CAM industry are having an impact on MCAE. Hardware improvements are raising performance and lowering price on the full range of processor types. Display technology is resulting in fixed-configuration price reductions in the range of 15 percent per year. High-performance display of realistic images is finding widespread application as simulation activity increases. Software enhancements are opening up new applications with easier-to-use interfaces. Overall, the systems resulting from the rapid advances in each of the above enabling technologies can potentially change the way the world designs its products.
Modeling
The first step in any design and analysis task requires the construction of some kind of computer graphics model. There are three basic forms using 2-D, 3-D wireframe/surfacing, and solid modeling construction techniques. Each has inherent advantages in ease of use and speed. Since the vast majority of the world's products have been designed on pieces of paper, it is easy to believe that today's high-performance 2-D drawing systems can be effective design tools. The 3-D design systems developed since the mid-1970s have proven the concept and value of design in a simulated 3-D space. Solid modeling has taken over as the modeling technique of choice if 3-D modeling is required. As the dropping price/performance curve brings high-performance systems within the price range of the buyer, systems based on solid modeling will proliferate. Every major CAD/CAM and MCAE vendor has solid-modeling-based products in a current product offering or in development.
Any limitation in modeling will directly limit the range or class of products that can be effectively designed or analyzed with that tool. Many 2-D systems have reached functional equivalence with manual drafting methods, meeting all engineering drawing standards. The limitations remaining are inherent to the 2-D representation, which is primarily one of interpretation. Considering 3-D modeling, it is interesting to observe that not a single vendor has made the claim of having a solid modeler that can precisely model all parts and assemblies commonly found in industry.
Analysis
The Status of design evaluation can be illustrated by considering that the largest drawing has been made in a graphics system, but the largest design or analysis problem is still orders of magnitude away from realization. This premise indicates a Strong appetite for systems able to handle much larger problems with faster response times. The expected, more robust operation can also handle more detail in the analysis, potentially improving the quality of the design and reducing the skill
2.6-10 © 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
level of the operator to set up the problem. In general, the analysis function is becoming easier to use with an application interface that more closely speaks the language of the end-user application. Presenting a menu of material choices rather than just prompting for a material density value illustrates the trend in improving ease of use. Automatically preparing a design model for stress analysis using material and boundary condition information derived from the model is a more beneficial illustration.
The MCAE evolution can be viewed from several vantage points. The novice or casual-user approach is being addressed by the blending of engineering sketching, engineering handbook reference, and product design procedures into an easy-to-use package. The result is aimed at the engineer or designer with unpretentious design and analysis requirements who has a small amount of time to learn or relearn the use of the system.
The midrange user is typically concerned with complete product design from concept to component detail. Verification of the fit and function of the assembly is a common requirement with mass property and kinematic studies included. This mainstream application segment has been addressed by the 3-D wireframe CAD/CAM systems with reasonable success.
At the high end, the experts are willing to put up with just about any convoluted interface or procedure as long as it gets the job done. Casual or part-time users with less than optimal experience and training can easily get bogged down trying to solve some of the more complex problems with little probability of reaching a correct result. Finite-element modeling and analysis (FEM/FEA) programs are prime examples of this analytical approach. Fortunately, all of the major FEM/FEA vendors are hard at work improving the user interface, adding error detection, and enhancing analytical applications to reduce the operational overhead. All computer types from personal computers to supercomputers are being used effectively.
New Development Areas
Virtually every advancement in computing hardware can be utilized in MCAE. From application-specific integrated circuits (ASICs) to plug-in boards to super computers, almost every hardware technology and packaging scheme is being used to improve performance and lower price.
Processors
Engineering workstations are evolving quickly from a marginal computing resource to a 5-MIP-i- processor with very attractive pricing. The supercomputer is evolving, increasing the practical limits of problem solving for aerodynamic, fluid flow, and weather simulations. Processors used as network servers are improving the performance levels of groups of workstations requiring nominal investments.
CCIS Markets © 1986 Dataquest Incorporated September 2.6-11
2.6 Mechanical Computer-Aided Engineering (MCAE)
Display
The expectation of real-time simulation is driving display technology. An interesting observation finds that the pressure to develop an ultrafast display operation is difficult to justify from the standpoint of just a quicker picture maker. The prestige of owning and developing the fastest display in town seems to be a significant incentive. The users want it, but they don't seem willing to pay extra for it. The developers are spending millions in VLSI development to make it work. Dataquest believes that a strong opportunity exists for an MCAE product optimized for a highly interactive environment. Once users have access to a fully operational system with a user interface optimized for fast interaction, they will never go back to the old way of doing business.
Optimization
The closer integration of design and analysis techniques is opening the door for Optimization processing. This implies a computer-controlled modification of the design model based on a set of rules and results of each iteration of the analysis. Full implementation of this process is years away, but the potential benefit is enormous, affecting every aspect of product design.
New Algorithms
More efficient algorithms that should speed up processing are now in development. The "P-version" of the finite-element method is an example that constructs the model for analysis out of larger elements that more closely follow the shape of the model. A more accurate and faster analysis can result. This approach lends itself toward further automation in model generation and significant analysis performance improvement, but it needs to be proven for more than the 2-D elastostatic analysis so far demonstrated.
New Applications
Design constraints for higher strength and lower weight are forcing new design and analysis efforts in applications that have not historically required robust evaluation. The development of new engineering materials in the form of plastics, composite materials, metal alloys, and ceramics is compounding the complexity by combining new product design with new engineering materials. Precise modeling and analysis of these materials with simulation of the design in the as-used environment are leading the way to new development areas for MCAE.
Artificial intelligence, rule-based programming, and data base enhancements are being used to enhance MCAE development. The resulting systems promise to be more valuable with efficient user interfaces.
2.6-12 © 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
END USERS
MCAE System Utilization by the Industry
The users of MCAE are found in all manufacturing industries. Every industry has CAD/CAM installations involved with design and analysis of the manufactured products. A recent Dataquest survey determined the percentage of system utilization for the four primary application areas in mechanical CAD/CAM. The applications measured were design, analysis, drafting, and manufacturing. Combining the design and analysis percentages on an industry-by-industry basis provides the data shown in Table 2.6-2.
Table 2.6-2 is based on the 1985 Dataquest end-user survey. Number of sites indicate total number of sites responding to the survey, sorted by industry. Percentages represent the percentage of sites with mechanical applications and the percentage of system operations utilized for MCAE applications. The MCAE percentage is comprised of the sum of the design percentage and the analysis percentage.
Manufacturers in the computer, automotive, communication, and aerospace industries are the largest users of MCAE, based on the percentage of system use. The mechanical machinery industry is also large as a result of extensive use of mechanical CAD/CAM applications.
Table 2.6-2
System Utilization for MCAE/Design and Analysis
Indust r1es
Computer Automot i ve Commun i cat i ons Aerospace Other Mechan i ca1 Mach i nery
E1ect r i ca1 Moch i ne ry
T ronsportat i on
Fab Metal
Number of Sites
38 40 16 68 94
54
106 18 56
Percent wi Mechan i ca
AppIi cat
66% 70% 63% 68% 71%
91%
76% 83% 78%
th 1
i ons MCAE
Ut i 1i zat ion
46% 45% 43% 41% 39%
38%
35% 32% 28%
Des i gn Percent
39% 38% 34% 31% 29%
32%
30% 22% 23%
Sou rce :
Ana lysis Percent
7% 7% 9% 10% 10%
6%
5% 10%
5%
DATAQUEST August 1986
CCIS Markets © 1986 Dataquest Incorporated September 2.6-13
2.6 Mechanical Computer-Aided Engineering (MCAE)
PENETRATION
The level of penetration in mechanical CAD/CAM is defined to be the ratio of installed workstations to the population of users and potential users. Dataquest expects this ratio, in the long term, to approach 100 percent as workstation access becomes common. Since MCAE is viewed by Dataquest as a keystone in mechanical CAD/CAM development, the trend toward full implementation of M C / ^ is expected to continue with high probability.
The current penetration levels for M C / ^ can be estimated by using the Dataquest data base for workstations installed, Dataquest end-user survey data, and user population estimates from U.S. census data. The following should be noted about MCAE penetration levels:
• In 1985, there were approximately 44,800 workstations in use in the United States for mechanical applications. This population is expected to grow to 67,300 in 1986.
• Of the installed base in 1985, approximately 36 percent of that resource is used for MCAE activity. This is expected to increase to 42 percent in 1990 and to increase further to 48 percent in 1996.
• The population of all mechanical and industrial engineers, technicians, and drafters in the United States in the major manufacturing industries (S.I.C. 34, 35, 36, 37) is estimated to be 385,500 in 1985 and 397,000 in 1986.
• The resulting penetration percentage is approximately 12 percent in 1985 and 17 percent in 1986.
The above information can only be used as an indication of penetration. The following considerations need to be made to better understand the current situation:
• The population of engineers, technicians, and drafters in the above selected S.LC. code groups represent only 49 percent of the total. Other groups such as governmental agencies, education, and other manufacturing industries are important potential markets.
• Dataquest survey data indicate higher penetration levels if measured by the number of trained users compared with the number of installed workstations. Approximately 2.9 users have been trained for each installed workstation in the major manufacturing industries.
• The average utilization rate of the installed base of mechanical CAD/CAM workstations is estimated to be 12 hours per day, based on 1985 Dataquest survey data. Many of the trained users mentioned above are required to keep the installed base of workstations busy for more than 12 hours per day. As the part-time user with a dedicated workstation becomes more prevalent, the overall average utilization rate is expected to drop to less than 6 hours per day. High-performance/high-cost workstations will continue to be used more than 8 hours per day, with low-cost workstations used only 20 to 30 percent of the time.
2.6-14 ©1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
USER ISSUES
Performance Requirements for Display and Computation
The appetite for computer horsepower and display performance for design and analysis activities is insatiable. A reasonable means of visualizing this situation is to suggest that the largest drawing has been constructed in a CAD/CAM system. The largest design or analysis problem is still orders of magnitude away from realization. Display and manipulation operations must support the growing problem complexity and provide subsecond response time to reach the next plateau of user productivity.
Cost Per Seat
The cost of system purchase and/or lease, including operation costs, must be low enough to allow widespread implementation on a corporate level. The magic number for wholesale installation is expected to be in the $10,000 to $20,000 range. PC-based products in that range have experienced phenomenal growth.
A composite average of $54,300 for mechanical applications in 1985 is expected to drop to $26,800 in 1990. The composite average of MCAE workstations is expected to follow a similar price reduction.
Ease of Use
Ease of use is something that every vendor claims but few demonstrate with any unique capability. The full-time user needs an improved interface to drive the higher-performance systems being developed. At the low end, the standard fare of menus, icons, mice, and prompting will have to suffice. Since the lower-cost systems are generally used by the casual users, it is very important to provide an easy-to-learn and relearn interface. On-line tutorial and help functions are suggested by users as beneficial.
Networking
Networking must provide communications between systems and accommodate computational and data base servers. The transfer of engineering data, both inside and outside a company, are essential. Transfer of IGES files are common now in the automotive industry between the major manufacturers and first-line suppliers. Networking is an integral necessity in completing the communications path of design and manufacturing automation.
CCIS Markets © 1986 Dataquest Incorporated September 2.6-15
2.6 Mechanical Computer-Aided Engineering (MCAE)
Data-Base Management
Data-base management with associativity between part geometry and nongraphic engineering data is necessary to maintain reliable design control and management.
Complete Part Modeling Functions
The I-can-model-anything modeler is not required to set up FEM/FEA analysis problems. Simplifications are made to speed up the process, hopefully, not distorting the results of the analysis. Advancements in computational resources and automated analysis techniques will make the approximations that are common today be obsolete in the near term, as fully detailed parts and assemblies are optimized under program control.
Data-Base Evolution Toward Corporate Definition
For the MCAE process to feed the downstream detail design and manufacturing operations, a complete geometric modeling function must be provided. This does not imply that the conceptual designer will build the final detail model, but it does imply that the functionality must be in the system for everyone to use when required. A common data base will allow the ready application of analysis tools to new design as well as production enhancements with a minimum of overhead. This unified approach is necessary to form the core of a corporate resource creating the development and production data base.
FEM/FEA
The extensive use of finite-element modeling and analysis will assure the continued use of this technology. The confidence of working with a time-proven analysis code is strong incentive to continue business as usual. Evolution will occur primarily in the user interface and new application areas, but core analysis processing is expected to change little. New design and analysis codes are expected to make inroads slowly with substantial verification required. New users will be more open to new analytical techniques, but reliable correlation to physical test must be proven.
Kinematics
Kinematic analysis is essential for development of mechanisms in product design. Eventually the assembly process is all that would be required to constrain the motion of the mechanism witli full 3-D simulation of part assembly with slop in the joints and just-touching contact. Full analysis with post processing of results is required.
2.6-16 © 1986 Dataquest Incorporated September CCIS Markets
1.6 Mechanical Computer-Aided Engineering (MCAE)
MARKET FORECASTS
This section presents detailed analysis of the 1985 MCAE market, with a forecast through 1990. It is analyzed by product type and region, indicating the hardware and software content of each classification. The hardware and software analysis allows an apples-to-apples comparison in looking at market share ranking of third-party softyvare vendors and turnkey system suppliers. Market share analysis for 1985 is included for the leading MCAE suppliers.
Overview
The MCAE workstation unit CAGR of 48.6 percent is significantly higher than the expected 34.1 percent CAGR of the total mechanical market through 1990. The 1985 to 1986 revenue growth in software for MCAE is expected to be more than 18 percent. More than 20 percent of the mechanical workstations were sold primarily as MCAE workstations. This percentage is expected to grow to 35 percent in 1990.
Market Forecast By Product Type
The forecast shown in Table 2.6-3a represents worldwide hardware and software revenue by product type. Table 2.6-3b indicates the percentage distribution of the same data. The 1985 market estimate, product distribution, and forecast to 1990 are based on reported 1985 company revenue and survey data. Revenue for both bundled and unbundled software products has been considered in the forecast. The units specified are estimated to be the corresponding systems and workstations required to support the expected software revenue. The following should be noted about the market forecast by product type:
• More than 76 percent of the MCAE workstations sold in 1985 were configured with host-based computers. This is expected to drop to less than 12 percent in 1990.
• Standalone-based workstations are the fastest growing product type, expected to grow from a 9 percent share in 1985 to more than 77 percent in 1990.
• Personal computers are expected to provide an important hardware platform for MCAE, representing a peak of 23.4 percent share in 1987. The level of PC-based MCAE products is expected to fall off after 1987 as the Standalone product becomes dominant.
• More than 9 out of 10 software dollars were spent on host-based products in 1985. This is expected to drop dramatically to a 15 percent level in 1990.
• Hardware revenue for host-based products follows the same pattern, dropping from 93 percent in 1985 to more than 27 percent in 1990.
CCIS Markets © 1986 Dataquest Incorporated September 2.6-17
2.6 Mechanical Computer-Aided Engineering (MCAE)
Table 2.6-3a
Worldwide MCAE Market Forecast by Product Type Hardware and Software Only
(Millions of Dollars and Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Worldwide
Revenue Total
Software
Hardware
Systems
Workstations
standalone
Revenue Total
Software
Hardware
Workstations
Host-Dependent
Revenue Total
Software
Hardware
Systems
Workstations
Personal Computer
Revenue Total
Software
Hardware
Workstations
$869
$209
$660
3.729
8,734
$53
$22 $32
806
$795
$181
$614
1,640
6,645
$20
$5
$15
1,283
$996
$248
$748
7,775
13,456
$127
$52
$75 2.542
$821
$183
$638
2.582
8.263
$48 $13
$35
2.651
$1,118
$314
$805
13,666
20.123
$265
$111
$154
6,342
$772
$179
$592
2,604
9,060
$81
$23
$58
4,720
$1,271
$410
$861
22,393
29,393
$483
$210
$273
13,842
$691
$171
$519
2,536
9,536
$97
$29
$68
6,015
$1,419
$535
$884
36,355
42,921
$794
$362
$432
27,489
$523
$141
$382
2,160
8,726
$101
$31
$70
6,706
$1,607
$699
$908
57,594
63,276
$1,157
$562
$595
48,797 "
$352
$105
$247
1,696
7,378
$98
$32
$66
7,100
13.1%
27.4%
6.6%
72.9%
48.6%
84.9%
91.5%
79.8%
127.2%
-15.0%
-10.4%
-16.6%
.7%
2.1%
37.4%
42.7%
35.2%
40.8%
Source: DATAQUEST
August 1986
2.6-18 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Alded Engineering (MCAE)
Table 2.6-3b
Worldwide MCAE Market Forecast by Product Type Hardware and Software Only
(Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone
Revenue Total
Software
Hardware
Workstations
Host-Dependent
Revenue Total
Software
Hardware
Systems
Workstations
Personal CoInputer Revenue Total
Software
Hardware
Workstations
=====
6.2%
10.5%
4.8%
9.2%
91.5%
86.9%
93.0%
44.0%
76.1%
2.3%
2.6%
2.2%
14.7%
12.7%
21.0%
10.0%
18.9%
82.4%
73.6%
85.3%
33.2%
61.4%
4.8%
5.4%
4.7%
19.7%
23.7%
35.5%
19.1%
31.5%
69.0%
57.2%
73.6%
19.1%
45.0%
,»
7.3%
7.3%
7.2%
23.5%
38.0%
51.2%
31.7%
47.1%
54.4%
41.8%
60.3%
11.3%
32.4%
7.6%
7.0%
8.0%
20.5%
56.0%
67.7%
48.9%
64.0%
36.9%
26.4%
43.2%
5.9%
20.3%
7.1%
5.9%
7.9%
15.6%
=====
72.0%
80.4%
65.5%
77.1%
21.9%
15.0%
27.2%
2.9%
11.TO
6.1%
4.6%
7.2%
11.2%
Source: DATAQUEST
August 1986
Market Forecast by Region
The forecast shown in Table 2.6-4a represents worldwide hardware and software revenue by region. Table 2.6-4b indicates the percent distribution of the sanie data. The 1985 market estimate, product distribution, and forecast to 1990 are based on reported 1985 company revenue and survey data. Revenue for both bundled and unbundled software products has been considered in the forecast. The units specified are estimated to be the corresponding systems and workstations required to support the expected software revenue. The following should be noted about the market forecast by region:
• The majority of MCAE product was sold in North America in 1985, representing more than 59 percent of the product revenue. This corresponds to a 45 percent revenue share for the total mechanical market. The MCAE market revenue is expected to drop slightly to 58.3 percent in 1990. Roughly half of the MCAE workstations sold in 1985 were sold in North America.
CCIS Markets 1986 Dataquest Incorporated September 2.6-19
2.6 Mechanical Computer-Aided Engineering (MCAE)
• The European region is growing slightly as a percentage of revenue and workstation units installed. Revenue is expected to grow from more than 25 percent in 1985 to 28 percent in 1990.
• The Far East was responsible for approximately 13 percent of product revenue in 1985. This corresponds to a higher unit percentage of roughly 20 percent. The more prevalent low-cost product causes the higher unit percentage.
• The remaining worldwide market has a small 1.5 percent of revenue and unit shipments. This market is keeping up with the growth of MCAE in general, maintaining an expected 1.5 share throughout 1990.
2.6-20 © 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
Table 2.6-4a
Worldwide MCAE Market Forecast by Region Hardware and Software Only
(Millions of Dollars and Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Wor ldwide
Revenue T o t a l
Software
Hardware
SysteIns
Workstations
North AInerica
Revenue Total
Software
Hardware SysteIns
Workstations
Europe
Revenue Total Software
Hardware Systems Workstations
Far East
Revenue Total
Software
Hardware
SysteIns
Workstations
Rest of World
Revenue Total
Software
. Hardware
Systems
Workstations
$869
$208
$660
3,729
8,734
$517
$124
$393
2,118
4,352
$225
$54 $171
1,077
2,501
$113
$27 $86
490
1,749
$13
$3
$10
44
132
$996
$248
$748
7.775
13,456
$592
$148
$445
4,623
6,691
$262
$65
$197
2,046
3,907
$128
$32
$96 1,000
2,668
$14
$3
$10
106 190
$1,118
$314
$805
13,666
20.123
$661
$185
$476
8,078-
9,936
$302
$85 $217
3,692
5,984
$140
$39 $101
1.717
3,930
$15
$4
$11 180
274
$1,271
$410
$861
22,393
29,393
$747
$241
$506
13.170
14.424
$350
$113
$237
6,161
8,888
i157
$51 '$106
2,768
5,681
$17
$5 $11
295
400
$1,419
$535
$884
36,355
42,921
$830
$313
$517
21,271
20,934
$395
$149
$246
10,111
13,107
$175
$66 $109
4,494
8,296
$19
$7
$12
479
583
$1,607
$699
$908
57,594
63,276
$935
$407
$529
33,525
30,672
$450
$196
$254
16,133
19,450
$199
$87
$113
7,148
12,262
$22
$10
$12 788
892
13.1%
27.4%
6.6%
72.9%
48.6%
12.6%
26.8%
6.1%
73.7%
47.8%
14.9%
29.4%
8.3%
71.8%
50.7%
11.9%
26.1%
5.5%
70.9%
47.6%
11.5%
25.6%
5.1%
77.8%
46.6%
Source: DATAQUEST
August 1986
CCIS Markets 1986 Dataquest Incorporated September 2 . 6 - 2 1
2.6 Mechanical Computer-Aided Engineering (MCAE)
Table 2.6-4b
Worldwide MCAE Market Forecast by Region Hardware and Software Only
(Percent of Total)
1985 1986 1987 1988 1989 1990
North AInerica
Revenue Total
Software
Hardware
Systems
Workstations
Europe
Revenue Total
Software
Hardware Systems
Workstations
Far East
Revenue Total Software
Hardware
Systems
Workstations
Rest of World Revenue Total
Software
Hardware
Systems
Workstations
=====
59.6%
59.6%
59.6%
56.8%
49.8%
25.9%
25.9%
25.9% 28.9%
28.6%
13.1%
13.1%
13.1%
13.1% 20.0%
1.5%
1.5%
1.5%
1.2% 1.5%
=====
59.5%
59.5%
59.5%
59.5%
49.7%
26.3%
26.3%
26.3%
26.3%
29.0%
12.9% 12.9%
12.9%
12.9%
19.8%
1.4%
1.4%
1.4%
1.4%
1.4%
==-==
59.1%
59.1%
59.1%
59.1%
49.4%
27.0% 27.0%
27.0%
27.0%
29.7%
12.6% 12.6%
12.6% 12.6%
19.5%
1.3%
1.3%
1.3%
1.3% 1.4%
=====
58.8%
58.8%
58.8%
58.8%
49.1%
27.5%
27.5%
27.5%
27.5%
30.2%
12.4% 12.4%
12.4%
12.4%
19.3%
1.3%
1.3%
1.3%
1.3% 1.4%
=====
58.5%
58.5%
58.5%
58.5%
48.8%
27.8%
27.8%
27.8%
27.8%
30.5%
12.4%
12.4%
12.4%
12.4%
19.3%
1.3%
1.3%
1.3%
1.3% 1.4%
=====
58.2%
58.2%
58.2%
58.2%
48.5%
28.0% 28.0%
28.0%
28.0%
30. ra
12.4% 12.4%
12.4%
12.4%
19.4%
1.4%
1.4%
1.4%
1.4%
1.4%
Source: DATAQUEST
August 1986
2.6-22 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
MARKET SHARE ANALYSIS
The estimated mechanical computer-aided engineering market analysis for 1985 is shown in Table 2.6-5 and Figure 2.6-2. The 1985 software-only revenue is used to indicate market share. Hardware and software revenue for turnkey and software-only vendors was considered. The if-sold value of the hardware necessary to support the unbundled software products has been added where necessary to allow reasonable comparison.
Table 2.6-5
Estimated 1985 MCAE Market Share
Vendors
Hardware and Sof tware Revenue*
Software-Only
Revenue Market Sha re
IBM Computervi s i on MocNeal-Schwendl er* SDRC* Intergraph McDonne11 Doug!as Swanson Analysis PDA Engineering Prime Computer App11 con Other
$252.9 105.4 75 .9 69 .5 55.4 48.5 40.8 31 .9 34.9 31 .6 98.9
$ 57.8 25.4 21 .0 21 .0 12.6 11.1 10.1 8.8 7.9 7.8
.: 25.0
27.7% 12.2
• 10.1 10.1 6.1 5.3 4.8 4.2 3.8 3.7 12.0
Total $845.7 $208.5 100.0%
•The it-sold value for hardware to support the unbundled software products has been added where necessary for comparison purposes . Market share percentages are calculated based on software-only revenue.
Source: Dataquest August 1986
CCIS Markets 1986 Dataquest Incorporated September 2.6-23
2.6 Mechanical Computer-Aided Engineering (MCAE)
Figure 2.6-2
Estimated 1985 MCAE Market Share
Computervision 12.2%
MacNeal-Schvi/endler 1 0 . 1 %
In t fSraph ^ \ / / \ V ^ ^ Applicon Inc.
6-1°/<> ^>~J__J_-<^' ' \ ^•'^°''° McDonnell Douglas [ \ Prime Computer
5.3% I \ 3.8% Swanson Analysis PDA Engineering
4.8% 4 .2%
Source: Dataquest August 1986
DATAQUEST ANALYSIS
Market
MCAE is a key element in the evolution of CAD/CAM. MCAE is growing, upgrading the complete design and analysis process including conceptual design, detail product design, and manufacturing engineering design. Users at all levels will benefit by having access to efficient tools for the dedicated or casual user.
In the short term, the benefits of MCAE are derived from the close integration of design and analysis applications. Full integration of MCAE into the mainstream of corporate decision making is a long-term issue essential in gaining the full benefit of design automation technology.
2.6-24 © 1986 Dataquest Incorporated September CCIS Markets
2.6 Mechanical Computer-Aided Engineering (MCAE)
Product
The total range of process and display advancements, from personal computers to supercomputers, are being utilized. Also used are all types of display hardware, from monocolor low-resolution to high-resolution, full color, real-time dynamic display. Dataquest believes that the basic requirement to solve more complex design and analysis problems will continue to drive product offerings toward higher-performance packages.
Solid modeling is emerging as the primary modeling tool in MCAE, with 2-D and 3-D wireframe supporting the effort. Finite-element modeling and analysis is expected to remain an important technology in MCAE throughout the foreseeable future. Analytical tools are being applied to a growing list of applications, increasing the value and utility for a larger audience.
Vendor
The 54 percent MCAE market growth estimate in workstation units in 1986 is significantly greater than the expected 32 percent growth of the mechanical market in general. All major CAD/CAM vendors are contributing with current product offerings. The 1985 market share analysis shows the turnkey vendors nearly Splitting the market with software-only vendors. The top ten mechanical CAD/CAM vendors must offer highly functional MCAE products to remain in the club of market leaders.
CCIS Markets © 1986 Dataquest Incorporated September 2.6-25
2.6 Mechanical Computer-Aided Engineering (MCAE)
(Page intentionally left blank)
2.6-26 © 1986 Dataquest Incorporated September CCIS Markets
]plicatior
3.1 AEC Definitions
The Architecture, Engineering, and Construction (AEC) segment comprises CAD products that are used in the design (prebuild) and management (postbuild) phases of a facility project. CAD is typically not used during the building phase of a project, although its use in the design phase can have a direct impact on how productive the construction of a facility will be; significant cost and time savings have been reported during the building phase as a result of using CAD in project design. The most common form of output from a CAD system would be drawings of a facility yet to be built, or a facility being managed.
Figure 3.1-1 shows Dataquest's view of this segment, which takes into account major end-user markets as well as the tasks associated with both the design or management phase of a facility project.
Figure 3.1-1
The AEC Segment
Data Management
Drafting/Documentation
Analysis
Design/Model
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 3.1-1
3.1 AEC Definitions
FACILITY
The standard (Webster's) definition for facility reads, "...something that is built, installed, or established to serve a particular purpose." Engineering News Record (ENR) uses several specific categories of facility projects as a barometer to measure the health of the design and construction industries from one year to the next. Table 3.1-1 lists those categories of facilities.
Table 3.1-1
Facility Project Categories
Category
Water Supply Power Manufacturing Building
Sewer, Waste Transportation Pipeline Other
Description
Dams, Canels, Locks, River Channels Electric/Gas Utilhy Plants All Kinds of Plants (i.e., Process/Discrete) Residential/Commercial (Offices, Shopping
Centers, Hospitals, etc.) As Stated Roads, Highways, Bridges, Railroads, etc. Oil/Gas (including Natural Gas) Offshore Drilling Platforms, Ships (and other
ocean-going vessels), etc.
Source: ENR Magazine Dataquest June 1986
MAJOR MARKETS
As shown in Figure 3.1-1, the AEC CAD markets are very diverse. And the engineering professionals and technicians working in these industries are from a variety of disciplines, making for even greater levels of complexity. Regardless of these diversities, however, a facility (and the design, construction, or managing of it) is always the focal point of these markets and the professionals working within them.
The type of facility that is being designed, built, or managed dictates what type of firm(s) and engineering professional(s) are required for project execution. In many cases, companies or utilities have in-house design or construction crews. However, Dataquest believes that the majority of facility projects are executed by independent design or construction firms.
3.1-2 1986 Dataquest Incorporated July CCIS Markets
3.1 AEC Definitions
Table 3.1-2 lists the various types of professionals that could at some point be involved in a facility project and have use for CAD systems.
Table 3.1-2
Classification of Professionals
Architect Civil/Structural Engineer Civil/Site Engineer Mechanical Engineer Surveyor Electrical Engineer Industrial Engineer Chemical Engineer Piping Engineer Petroleum Engineer Nuclear Engineer Marine Engineer/Naval Architect Related Technicians (i.e., Designers/Draftspersons) Facility Manager
Source: U.S. Census of Population Dataquest June 1986
TASKS
The tasks of design, analysis, documentation, and data management take on various meanings based again on the facility being designed or managed, as well as the professionals involved. For instance, in the case of an architect working on a commercial office building project, design usually means the creative and asthetic aspects of that project (i.e., the most visual aspects of the proposed structure). To an engineer, design may represent the creative aspects of his work as well. However, on a day-to-day basis it also represents the cranking out of calculations in some form to complete the "design" (i.e., the structural, mechanical, and electrical aspects of the building).
There are numerous programs and special CAD system functionalities that are related to the AEC application segment. Many of them are listed below, including:
• Geometric construction and • Space projections editing
• Stacking/blocking routines • Planning/layout
Elevations
Massing studies
Equipment/inventory management
Structural grid/column layouts
CCIS Markets © 1986 Dataquest Incorporated July 3.1-3
3.1 AEG Definitions
Interference checking
Steel detailing
Piping/plumbing design
P & EDs
Control diagrams
Sectioned views
Solid modeling
FEM/FEA
Bill of Materials generation
Stress calculations (analysis)
HVAC design
Electrical schematics
Isometric views
Perspective views
Wireframe modeling
On-line graphics programming
Report generation
Given the depth and complexity of the ABC segment (as demonstrated by the breakouts of our model), it is beyond the scope of this section to further define what each of the different types of facility projects would require in terms of CAD system functionality. There are distinct CAD differences from one project to another and in both the prebuild phase and the postbuild phase (termed facility management).
Dataquest will address the CAD requirements for the different types of facility projects in future writings, as part of this AEC chapter.
•
3.1-4 1986 Dataquest Incorporated July CGIS Markets
3.2 AEC Executive Summary
This summary highlights the key points and analyses discussed throughout this chapter. Please refer to the chapter in its entirety for a comprehensive analysis of the AEC application segment.
• AEC CAD/CAM revenue was $746 million in 1985; it is forecast to grow to $896 million in 1986 and to $1,876 million in 1990.
• DATAQUEST expects the AEC CAD/CAM market to grow in revenue at 21 percent compounded annually for the next five years.
• The total number of CAD/CAM workstation units shipped in 1985 was 18,514; Dataquest forecasts 20,712 in 1986 and 42,525 in 1990.
• Major hurdles have been crossed that were once blocking widespread use of AEC CAD tools, i.e., price/performance ratio of hardware tools, display performance, availability of software, and ease of use.
• As the price of hardware continues to drop, more users will continue to look toward CAD as a replacement for manual design methods.
• The effect of the personal computer has been dramatic. More than 70 percent of the workstations sold in 1985 were based on PCs.
• Data base management capability will be a crucial factor in the future of facility design and management.
• Future systems will allow fast- or slow-motion data base manipulation with a time-base reference available to provide accurate simulation of changes in the model as a function of time. This will result in realistic simulation of a wide variety of operations, which will be useful in many facility projects.
• Mergers and acquisitions can be valuable shortcuts toward improving the relative position of a vendor's total offering. Careful analysis of the many opportunities can avoid a costly or catastrophic detour.
OCXS Markets © 1986 Dataquest Incorporated July 3.2-1
3.3 AEC Market Overview
AEC HISTORY
Until 1983, the AEC segment had been affected by several key factors. These included:
• Dominance of the segment by only four CAD vendors
• CAD system usage limited mostly to 2-D drafting applications
• Expensive and often limiting computing/graphics hardware
The handful of vendors dominating the AEC segment included Applicon, Auto-trol, Computervision, and Intergraph. A turnkey, host-dependent system approach prevailed, and Digital Equipment's PDP-11 and VAX computers were featured in the CAD systems of all the vendors (except Computervision). For this reason, we believe that Digital Equipment hardware had been the dominant computing platform in this CAD segment.
In 1982, Auto-trol made history by positioning itself as the first AEC vendor to offer Standalone computing capability. The company announced that it would offer its AEC products on Apollo Computer's first standalone product. Late in 1983, Calma also announced its support of ApoUo's workstation products.
Table 3.3-1 shows Dataquest's estimates of the installed base of AEC workstations for each of the vendor companies as of year-end 1983 (and the combined totals of all these companies) compared with the total AEC installed base. We estimate that the workstation installed base of these four vendors represented 81 percent of the total AEC installed base at year-end 1983.
Table 3.3-1
Year-End 1983 Estimates Worldwide AEC Workstation Installed Base
(Thousands of Units)
Year-End 1983 Company Installed Base
Applicon 1,030 Auto-trol 1,187 Computervision 1,573 Intergraph 2,495
Total 6,285
Total Installed Base 7,800
Source: Dataquest June 1986
CCIS Markets © 1986 Dataquest Incorporated July 3.3-1
3.3 AEC Market Overview
CAD vendors until now have capitalized on architects' and engineers' needs to generate enormous quantities of detailed construction drawings by offering systems to automate this stage of a project (labeled the drafting/documentation stage). However, a design process usually starts long before it reaches a draftsperson's table. Prior to this point, the project architect and/or engineer has already spent many hours huddled over hand-drawn sketches or plastic miniature-size models, conceptualizing a proposed facility. The drawings that emerge from this stage are usually called concept drawings or (architectural) renderings. There has been much disagreement (in both the vendor and AEC user communities) surrounding the need for a system with anything more than drafting functionality. We believe though that most users have not been able or ready, for a number of reasons, to tackle the challenge of implementing full-scale (concept design to design documentation) systems. The reasons for this can be identified as hardware, hardware, and hardware; most users in the AEC community were not in a position to invest in the computing horsepower needed to drive full-scale design systems.
Niche Approaches
Eventually, the absence of design and analysis solutions from the major turnkey vendors cleared the way for the AEC niche market vendors. The solutions introduced by this group were much more complex and were usually sold on a third-party basis. One of the best-known and most-used solutions is STRUDL, a Structural program that is used to calculate the effects of stress on a given Structure. In addition, many other programs have been developed for the mechanical, electrical, and civil/site disciplines to solve the complex calculations involved in those aspects of facility design.
Drafting Revisited
Dataquest believes that the entry of personal computer-based CAD solutions forever changed the AEC world. The revolution began in 1984, when one product, AutoCAD from AutoDesk, took the CAD world by storm; we estimate it shipped in excess of 5,000 packages that year.
AutoCAD was quickly adopted by many professionals in this application segment, bringing the focus back again to the world of drafting and away from full-scale design systems. A survey conducted by AutoCAD of its installed base in early 1986 revealed that half of all disciplines using AutoCAD fall into the AEC classification.
The ability of personal computer-based systems to serve this drawing-intensive application segment has been disputed since the introduction of the first system in 1978. (T & W Systems was actually the first to offer this type of approach.) But it was a short-lived dispute, as more and more functionality (particularly in hardware) was added to this product platform. Between 1984 and 1986, Dataquest believes that nearly 100 software solutions were made available to the AEC segment, for
3.3-2 © 1986 Dataquest Incorporated July CCIS Markets
3.3 AEC Market Overview
use on the personal computer. We also believe that a majority of them have been developed as "piggyback" solutions for the AutoCAD program, / ^ d several of these solutions brought the issues of design and analysis back into the spotlight.
Major Turnkey Vendors' Dominance Wanes in 1984
To be sure, the market for AEC CAD systems expanded in 1984, with the availability of low-cost solutions. This marked a major shift in the overall installed base of workstations. As shown in Table 3.3-2, the four vendors that together had dominated the AEC segment through 1983 represented only 37 percent of the total installed base after 1984. Dataquest estimates that 9,530 personal computer workstations were shipped during 1984, which represented 72 percent of the total workstations shipped that year to the / ^ C segment.
Table 3.3-2
Year-End 1984 Estimates Worldwide AEC Workstation Installed Base
(Thousands of Units)
Company
Applicon Auto-trol Computervision Intergraph
Total
Total Installed Base
Year-End 1984 Installed Base
1,176 1,349 1,696 3,379
7,600
20,784
Year-End 1983 Installed Base
1,030 1,187 1,573 2,495
6,285
7,800
Source: Dataquest June 1986
As 1984 was reaching a close and 1985 approaching, many of the traditional CAD vendors (as well as new CAD vendors) were either initiating or implementing low-cost system strategies to address a larger available market. The writing was on the wall in 1984. It read:
LOW-COST SOLUTIONS MEAN MANY MORE BUYERS
We believe that this statement has never been truer than in the AEC segment, where an estimated 80 percent of design firms have 10 or fewer persons working in them.
CCIS Markets 1986 Dataquest Incorporated July 3.3-3
3.3 AEC Market Overview
CURRENT ENVIRONMENT
Aside from the low-cost issue and all that it entails (e.g., distribution channel decisions) there are currently additional market- and product-related considerations for CAD vendors that participate in the AEC segment. Some of the major considerations include:
• Having flexible enough product offerings to ride out the constant shifts in user requirements
• Interchange standards
• Data base management
• Furthering progress on interfaces for drawing and engineering functions
Shifts in User Requirements
Engineering News Record reports regularly on the changing scene of construction planning. One message that is heard consistently throughout the industry concerns the office/commercial building market; ENR observers predict a drastic decline in the next several years in new construction plans (1986 plans are forecast to increase only two percent). On the more positive side, infrastructure (i.e., roads, highways, bridges) construction plans are booming across the United States and around the world.
With most oil-related and nuclear projects in a holding pattern, design and/or construction firms that depended on this kind of work are scrambling to stay afloat, and in many cases are reorganizing to address the opportunities that exist in other project sectors.
The above situations are examples of the dynamics of the facility design and construction industry. CAD vendors that are wary of these dynamics are reaping the rewards, for as stated earlier, the type of CAD products needed for project design differ according to the type of facility being built. Those whose products are tied to any one particular need are probably riding the same choppy wave that affects the users' livelihood. At this stage, many design firms are experiencing the effects of instability in different project segments.
Interchange Standards
As the number of AEC C/UD users grows, the problem of architects, engineers, and general contractors all working on the same project with different CAD systems becomes more apparent. Dataquest believes that although specific interfaces have been developed between the traditional vendors' CAD systems, the need for a Standard exchange specification with translators to each system has never been
3.3-4 © 1986 Dataquest Incorporated July CCIS Markets
3.3 AEC Market Overview
greater. The mechanical CAD segment cannot function without such a standard; the automobile and aerospace manufacturers are examples of this fact.
The AEC subcommittee of the Initial Graphics Exchange Specification (IGES) has been working toward developing future versions of IGES to serve AEC needs better. Dataquest believes that a common graphics exchange standard for AEC users is essential if CAD is to provide not just automated drafting but design coordination within a firm and between firms. We believe at this stage that such a Standard is imminent, quite possibly with the release of Version 3.0 of IGES.
User groups are also set up to test the standard as it is upgraded over the next year. Hellmuth, Obata, and Kassabaum (HOK), an architectural firm in St. Louis, has produced an IGES test drawing for a building that will help to test whether the claims of a vendor in conforming to IGES are realistic. (An interesting note—HOK released its first architectural system in 1985, composed of proprietary software and Digital Equipment hardware.)
Data Base Management
In light of the multidisciplinary nature of the AEC segment, it is not surprising to find a similar scenario to what exists in the mechanical segment—usually termed "islands of automation." Many of the CAD products available today solve only one particular piece of the total facility design puzzle.
As many CAD vendors have acknowledged, data base management capability is another critical factor in the growth of the AEC segment, falling directly in line with IGES capability to effectively merge these automation islands. Once the systems compatibility issue is solved via interchange standards, the flow of information must be transferred, controlled, and maintained. Almost without exception, a user's data base represents its most valuable investment in CAD. This is becoming increasingly more evident, since it would contribute greatly to a user's ability to manage a facility after construction. In this capacity, its most vital role would be to provide a user with quick and ready access to accurate and up-to-date information about the facility.
Data base management capabilities have become more sophisticated, providing capabilities to generate bills of materials and other comprehensive reports from the project data base to support related design, purchasing, and construction activities. Demands for such data base management features as change management and notification, access control (particularly important for distributed workstation-based systems), and drawing archiving, have been met with limited success.
Drawing/Engineering Interfaces
Increasingly sophisticated hardware technology, especially in the graphics area, has boosted the efforts behind interfacing the engineering (design/analysis) aspects
CCIS Markets © 1986 Dataquest Incorporated July 3.3-5
3.3 AEC Market Overview
of a facility project with the drawing (drafting) aspects. This is perhaps one of the most crucial issues in the world of AEC, and again, is closely related to the interchange standards issue. Software vendors and turnkey system suppliers are working to fill the gaps and to interface accepted engineering programs and methods to drafting systems.
MARKET OPPORTUNITIES
Each of the issues discussed in the previous section on current environment focused on system functionality and the opportunities that existed for improvement. The overall consensus could be that the most successful CAD vendors in the AEC segment will provide well-integrated application software. Not only would it be well integrated, but it would run on a wide range of computing hardware. These Statements are both true in general, but they fail to identify where some of the market opportunities exist and how they are related.
Facility Management
Facility management can be labeled both a market niche and an application within the AEC segment. Henceforth, it will be treated and defined as both.
Dataquest believes that facility management will be one of the fastest-growing AEC markets during the remainder of the 1980s. A forthcoming report detailing this market/application segment will describe this growth in greater detail.
As a CAD application, it requires the principles of design or drawing that would best suit the facility being managed. Oftentimes, the issues concern space allocation as it would occur in an office or manufacturing environment. Given these two examples, the end user might be an architect or industrial engineer.
CAD is really only one part of the overall picture in a facility management environment. A host of other application-specific functions are necessary in most cases. And most of them rely on the presence of data base management systems to be implemented successfully.
We believe that hardware preferences will vary according to the size of an organization and often according to how facility management is viewed. For example, if it is viewed as an integral part of a large corporation (in excess of 500,000 square feet), the implementation would most likely center on a centralized computing approach (i.e., mini or mainframe computers). Vendors choosing a strategy of targeting this size of facility management customers will want to be prepared to offer this type of solution.
Dataquest believes that personal computer-based solutions will be considered viable alternatives in companies with 500,000 square feet or less.
3.3-6 © 1986 Dataquest Incorporated July ' CCIS Markets
3.3 AEC Market Overview
Design/Construction Firms
This market category relates back to Dataquest's AEC model shown in the definition section of this chapter. There are many firms that fall under this heading, which makes for a highly competitive situation. In an effort to diversify, many of them are moving into new project-related work. The two most visible shifts have been toward providing construction management or materials procurement for construction. These highly information-intensive applications often require larger computer capacity. Many vendors are positioning themselves to address this emerging market opportunity.
CCIS Markets © 1986 Dataquest Incorporated July 3.3-7
3.4.1 Total AEC CAD/CAM
This section covers the total architectural, engineering and construction (AEC) CAD/CAM market for all regions and product types and refers to Figures 3.4.1-1 Revenue and 3.4.1-1 Shipments and Table 3.4.1-1.
• The AEC segment reached an estimated $746 million in 1985 and is forecast to grow to $1,876 million in 1990, at a compound annual growth rate (CAGR) of 21 percent.
• Dataquest estimates that revenue will increase 21 percent in 1986, reaching $896 million.
• Workstation shipments in 1985 were an estimated 18,514 units; shipments are expected to reach 42,525 units in 1990, growing at an 18 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 3.4.1-1
3.4.1 Total AEC CAD/CAM
Figure 3.4.1-1 Revenue
AEC CAD/CAM-Worldwide
Millions of Dollars 2000-,
teoo
1600
1400-
1200
1000
800
600
400
200
'V^ KV' "v^NX'^ ss'^y-s. ^ ^
m VxN.. \
W^ k •s h..
S5^ ^ i m
W<v^ i V ' t 'X, ' '-4."^"V"'.J V -^ -i.. V -'
. .->V'%Xi
W-Ks WsXS
I ^ H
KXX^
^ ^
^:'^^\$
M; '\ ',Xv'*^ >XXv< i'\>,.sX-
^:^<^-sy K-,>?-::\
te ^c ^^
1985 1986 1967 19B8 1989 1990
Source: Dataquest June 1986
3.4.1-2 1986 Dataquest Incorporated July CCIS Markets
3.4.1 Total AEC CAD/CAM
Figure 3.4.1-1 Shipments
AEC CAD/CAM-Worldwide
Workstation Shipments 45000-
40000
35000-
30000 -
25000
20000
15000
10000
5000
p-'^'^\'r^i''''''l" vXV<'^'>
p>;w.
w^ •^•^'xv'
^^SS
^ XSXl ^ ^
m R;<K^:K ^ ^ ' ^ ^ i \ '''•i'
<^X >Kw!= \XW' .v .v
•-J%?«>A
•'"'"N'w
^ ^ ^ ^
V
t j ^ ^
^ •j ft) >, "'
I X
XX
X'\?W V -
%KvxS-•.>Xx\H
P '•:\"\\\i
1985 1986 1987 1988 1969 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 3.4.1-3
3.4.1 Total AEC CAD/CAM
Table 3.4.1-1
AEC CAD/CAM-Worldwide Total Applications
(Millions of Dollars/Actual Units)
^9eS 1986 1987 1^8 19^ 1^0 CAGR
Total Market
Revenue Systems Workstations
746 15,466 18,514
896 16,977 20,712
1,075 20,774 25,201
1,296
25.352 30,486
1,559 30,933 36,465
1,876 20.2X 37,096 19.IX 42,525 18.IX
Source: Dataquest
June 1986
3 4 1 - 4 © 1986 Dataquest Incorporated July CCIS Markets
3.4.2 AEC Market Shares
This section includes Dataquest's forecasts and analysis of the AEC market share distribution and refers to Figure 3.4.2-1 and Table 3.4.2-1.
• Intergraph Corporation continued to dominate this application area in 1985, with a 27 percent share of total market sales.
• Dataquest attributes Intergraph's dominance in this market during the past few years to several factors:
— Early entry into the marketplace
— Products that serve a wide range of AEC applications
— Continuous expansion of its product line
— Multifunctional systems (mapping is another strong key offering—an application that is closely tied to AEC)
• Despite a substantial growth in revenue during 1985 (approximately 20 percent), Intergraph's relative market share position became diluted as more vendors were added to the AEC roster of companies.
• Computervision held on strong to its second-place ranking in AEC, despite a shaky year for the company overall.
• After the second-place ranking, the picture resembles somewhat a dogfight—with Holguin-C/UD leading in the third-place position.
• Holguin received a boost in 1985 with the addition of BruningCAD to its camp; the acquisition of BruningCAD, combined with its own AEC business, catapulted Holguin to a third-place ranking.
• Most of the Other large, traditional turnkey CAD companies experienced Strong growth in this segment in 1985; IBM was boosted to a fifth-place ranking with an estimated 300 percent growth over 1984 revenue, reaching $35 million in new AEC system sales.
CCIS Markets © 1986 Dataquest Incorporated July 3.4.2-1
3 .4 .2 AEC Market Shares
Figure 3.4.2-1
AEC Market Share—Worldwide 1985
Source: Dataquest June 1986
3.4.2-2 1986 Dataquest Incorporated July CCIS Markets
3.4.2 AEC Market Shares
Table 3.4.2-1
AEC Market Share—Worldwide (Millions of Dollars)
COMPANY
Intergraph
Computervision
Holguin-CAD Cat ma
IBI4 Calcomp
Auto-Trot
McAuto
Prime Applicon
Autodesk
Hewlett-Packard
Control Data
SDRC MacNeal Schwendler Ferranti Matra Datavision
Other Computer Companies Other Europe Companies
Other Far East Companies Other Turnkey and Software
All Companies
1985 REVENUE
$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $
204 49 38 37 35 33 33 31 28 23 14 10 5 2 1 1 1 63 32 Tl 32 746
Source:
1985 SHARE
27.4%
6.5%
5.0% 4.9%
4.7% 4.4%
4.4%
4.1%
3.8% 3.1%
1.9%
1.3% .6% .2% .1% .1% .1%
8.5% 4.3%
10.3% 4.2%
100.0%
Dataquest
June 1986
CCIS Markets © 1986 Dataquest Incorporated July 3.4.2-3
3.4.3 AEC Regions
This section includes Dataquest's forecasts and analysis of the AEC market, segmented by region and refers to Figures 3.4.3-1 Revenue and 3.4.3-1 Shipments and Tables 3.4.3-1 and 3.4.3-2.
• We expect the estimated 21 percent CAGR in revenue between 1985 and 1990 to be evenly distributed over the four major market segments. Dataquest expects the European sector to make a very slight gain in share of total market.
• The North American section is forecast to maintain its lead in consumption of CAD, representing 63 percent of revenue worldwide.
• The emerging countries will have an early interest in AEC CAD/CAM tools in comparison with the other regional sectors because of the high level of building, construction, and large commercial development projects that are typical in that environment.
• The CAD products developed in Europe and Japan are expected to gain a growing percentage of the U.S. market share. U.S.-based vendors will require a concerted effort and strategic alliances with local distributors to maintain a significant market share. Dataquest believes that the next two years will provide the largest window of opportunity to gain market recognition and share.
CCIS Markets © 1986 Dataquest Incorporated July 3.4.3-1
3.4.3 AEC Regions
Figure 3.4.3-1 Revenue
AEC CAD/CAM By Region
lyillions of Dollars 1200-
1000
600-
600
400
200
0^ 1985
•
X
North Annerica
Europe
Far East
ROW
^ ^
1986 1987 1988 1S69 1990
Source: Dataquest June 1986
3.4.3-2 1986 Dataquest Incorporated July CCIS Markets
3.4.3 AEC Regions
Figure 3.4.3-1 Shipments
AEC CAD/CAM By Region
Workstation Shipments
27000 -
24000 -
21000-
18000-
15000-
12000-
9000-
6000-
3000-
n^
• •
X
North America
Europe
Far East
ROW
• "
X 1
v /
1
X 1
- ^ < >c
1985 1986 1987 1988 1989 1990
•
Source: DaEaouesC June 1986
CCIS Markets 1986 Dataquest Incorporated July • 3.4.3-3
3.4.3 AEC Regions
Table 3.4.3-1
AEC CAD/CAM By Region (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market
Revenue Systems Workstations
North America Revenue Systems Workstations
Europe Revenue
Systems
Workstations
Far East
Revenue
Systems Workstations
Rest of World
Revenue Systems Workstations
746 15.466 18,514
469
9,208 10,961
144
4,475
5.063
109
1.403 1,995
24
3a) 495
896
16,977 20,712
563 9,901
12,126
173 4,067
4,776
131
2,579 3,242
29
430
569
1,075 20,774 25,201
675 12,146 14,897
208 4,834
5,734
157
3,248
3.845
35
546 724
1,296
25.352 30,486
814 15.164
18.399
250
5.670
6,744
189
3,811
4.425
42 707
918
1,559
30,933 36,465
979 19,028
22,581
301
6,679
7,791
228
4,323 4,958
51 903
1,136
1,876
37,096 42,525
1,178 23.201 26.870
363 7,769
8,702
275
5,003 5,598
61
1,124
1,355
Source:
20.2X
19.1X 18.1%
20.2X 20.3X
19.6%
20.3X
11.7%
11.4%
20.3X
29.0% 22.9%
20.2X
24.2%
22.3%
Oataquest
June 1986
3.4.3-4 1986 Dataquest Incorporated July CCIS Markets
3.4.3 AEC Regions
Table 3.4.3-2
AEC CAD/CAM By Region (Percent of Total)
1985 1986 1987 1988 1989 1990
North America
Revenue
Systems Workstations
Europe
Revenue Systems
Workstations
Far East
Revenue
Systems Workstations
Rest of World
Revenue Systems
Workstations
63X
60% 59X
19X 29% 27X
15X
9X
11X
3X
2X
3X
63X 58X
59X
19X 24X 23X
15X
15X
16X
3X
3X 3X
63X
58X
59X
19X 23X 23X
15X
16X 15X
3X 3X
3X
63X 60X
60X
19X 22X 22X
15X
15X 15X
3X
3X 3X
63X
62X 62X
19X 22X
21X
15X
14X 14X
3X 3X
3X
63X
63X 63X
19X 21X
20X
15X 13X
13X
3X 3X
3X
Source: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 3.4.3-5
3.4.4 AEC Product Types
This section includes Dataquest's forecasts and analysis of the AEC CAD/CAM market segmented by product type and refers to Figures 3.4.4-1 Revenue and 3.4.4-2 Shipments and Tables 3.4.4-1 and 3.4.4-2.
• The compound annual growth rate (CAGR) in revenue from 1985 to 1990 is forecast to be 20 percent.
• Personal computer-based system shipments dominated in 1985, accounting for an estimated 83 percent of total system shipments.
• Although personal computer-based solutions will continue to be viewed as viable CAD options, we believe that the emphasis will shift steadily to a higher-performance 32-bit workstation solution (particularly as price erosion continues to occur).
• With the average system cost dropping, a larger increase in workstation shipments is projected. The 1985 to 1990 CAGR is estimated at 18 percent.
• In 1985, workstation shipments totaled 18,512 units. They are expected to grow to an estimated 42,525 in 1990, an 18 percent GAGR.
• Systems with distributed architectures are forecast to represent 85 percent of the total market in 1990 by workstation volume and 79 percent by revenue.
CCIS Markets © 1986 Dataquest Incorporated July 3.4.4-1
3.4.4 AEC Product Types
Figure 3.4.4-1 Revenue
AEC CAD/CAM by Product Type—Worldwide
MiHions of Dollars
1200
1000-
800
600
400
200
• Standalone
• Host-Dependent
^ Personal Connputsr
0-igas 1986 1987 1988 19S9 1990
Source: Dataquest June 1986
3.4.4-2 1986 Dataquest Incorporated July CCIS Markets
3.4.4 AEC Product Types
Figure 3.4.4-1 Shipments
AEC CAD/CAM by Product Type—Worldwide
Workstation Shipnnents
18000^
16000-
14000-
i
12000-
10000-
8000:-
6000-
4000 4
2000-
0 -
• •
k—
Standalone
Host-Dependent
Personal Computer
1 1
-^—
1 <
i\.
~—i>
1985 1986 1987 1988 1989 1990
Source: Dataquest June 19S6
CCIS Markets 1986 Dataquest Incorporated July 3.4.4-3
3.4.4 AEC Product Types
Table 3.4.4-1
AEC CAD/CAM-Worldwide Application by Product Type
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Marlcet Revenue
Systems Workstations
Standalone
Revenue Systems
Workstations
Host-Dependent
Revenue
Systems
Workstations
Personal Computer
Revenue Systems
Workstations;
746 15.466 18,514
163 1,674
1,674
470 880
3,928
113
12,912
12,912
896 16,977
20,712
261 2,881
2,881
501
1,002
4,738
133 13,093
13,093
1,075
20.774
25,201
416 5,065
5,065
500 1.115
5,542
158 14.594
14.594
1.296 25.352
30.486
620 8.277
8,277
491 1,199
6,333
185
15.875 15.875
1.559
30.933 36,465
891 12,911
12.911
457 1.183
6.715
210
16,839
16,839
1,876
37,096 42,525
1.255
19.456 19.456
401 1.040
6.469
221 16.600
16.600
20.2X 19.1% 18.IX
50.4X 63.3X
63.3X
-3.IX
3.4X
10.5X
14.4X
5.2X
S.2X
SOURCE: Dataquest
June 1986
3.4.4-4 1986 Dataquest Incorporated July CCIS Markets
3.4.4 AEC Product Types
Table 3.4.4-2
AEC CAD/GAM-Worldwide Application by Product Type
(Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone
Revenue Systems
WorIcstations
Host-Dependent
Revenue
Systems Workstations
Personal Coofxiter
Revenue
Systems
WorIcstations
22X 11X 9X
63X 6X 21X
15X 83X 70X
29X 17X 14X
S6X 6X 23X
15X 77X 63X
39X 24X 20X
47X SX 22X
15X 70X 58X
48X 33X 27X
38X SX 21X
UX 63X 52X
57X 42X 35X
29X 4X 18X
13X 54X 46X
67X 52X 46X
21X 3X 15X
12X 45X 39X
SOURCE: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 3.4.4-5
3.4.5 AEC Turnkey Average Prices
This section includes Dataquest's forecasts and analysis of the average price per seat by product type for the AEC turnkey segment and refers to Figure 3.4.5-1 and Table 3.4.5-1.
• Dataquest believes that the average price per seat for AEC will decrease from $58,400 in 1985 to $34,900 in 1990, which represents a negative 10 percent CAGR.
• Host-dependent systems in general continue to offer greater capacity to run more engineering-intensive applications, which accounts for the highest average price per seat in 1985.
• By 1990, the average price per seat of standalone systems will exceed that of host-dependent systems by approximately $800 per seat, at $44,900.
CCIS Markets © 1986 Dataquest Incorporated July 3.4.5-1
3.4.5 AEC Turnkey Average Prices
Thousands of Dollars
Figure 3.4.5-1
AEC Turnkey—Worldwide Average Price per Seat
100
m-
20 i t
• Standalone
• Host-Dependent
A Personal Computer
1985 1986 1987 1988 1989 1990
Source: Dataquest June 1986
3.4.5-2 1986 Dataquest Incorporated July CCIS Markets
3.4.5 AEC Turnkey Average Prices
Table 3.4.5-1
AEC Turnkey—Worldwide Average Price per Seat (Thousands of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types
Staixialone Host-Dependent
Personal Computer
58.4
73.3 105.8
20.0
53.2 68.4
92.8
18.8
47.2 61.6 77.1
17.9
42.3 55.4 64.0
16.8
38.1 49.9
53.1 15.6
34.9 -10X 44.9 -9%
44.1 -16% 14.4 -6%
Source: Dataquest June 1986
OCXS Markets 1986 Dataquest Incorporated July 3.4.5-3
3.4.6 AEC Revenue Source
This section includes Dataquest's forecasts and analysis of the AEC market segmented by revenue source for each product type. The data are presented in Figure 3.4.6-1 and Tables 3.4.6-1 and 3.4.6-2.
• Dataquest estimates that hardware represented 66 percent of total revenue in 1985; we estimate this portion of revenue will decrease through 1990 to represent 56 percent in that year.
• Software revenue is estimated to increase (as a portion of total revenue) from 22 percent of revenue in 1985 to 27 percent of revenue in 1990, representing a 26 percent CAGR.
• Revenue from service is also estimated to increase as a percent of revenue through 1990; in 1985 service represented 13 percent of revenue, and in 1990 service is estimated at 17 percent of AEC revenue.
CCIS Marlcets © 1986 Dataquest Incorporated July 3.4.6-1
3.4.6 AEC Revenue Source
Millions of Dollars
Figure 3.4.6-1
AEC CAD/CAM-Worldwide Applications by Revenue Source
1000
SOO:
600
400-
200
• Hardware
# Softv/are
A Service
1985 198S 1987 1966 1989 1990
Source: Dataquest June 1986
3.4.6-2 1986 Dataquest Incorporated July CCIS Markets
3.4 .6 AEC Revenue Source
Table 3.4.6-1
AEC CAD /CAM-Worldwide Applications by Revenue Source
(Millions of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types Hardware Software Service Total
Standalone Hardware Software Service Total
Host-Dependent Hardware Software Service Total
Personal Computer Hardware Software Service Total
490 162
93
746
95
49 19
163
313
85
72
470
82 28
2
113
600 183
112 896
163
68 31
261
340
82
79
501
97 34
2 133
702 236
137 1,075
256
110 51
416
332 84
84
500
113
43
3 158
817
306 173
1,296
372
168 80
620
315
86
90 491
129
52
3
185
936
395 229
1,559
515
249
127 891
277
82
98
457
144
63
4
210
1,056
506
315 1,876
687 364
204
1,255
222
72 106
401
146
71 4
221
Source:
,
17% 26%
27%
20%
49%
49% 61%
50%
• 7 %
-3%
8% -3%
12%
20% 14%
14%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 3.4.6-3
3.4.6 AEC Revenue Source
Table 3.4.6-2
AEC CAD/CAM-Worldwide Applications by Revenue Source
(Percent of Total)
1985 1^6 1987 1988 1989 1990
Alt Product Types Karchtare Software Service
Total
Standalone Hardware Software Service
Total
Host-Dependent
Harchiare
Software
Service
Total
Personal Cosiputer
Hardware
Software
Service
Total
66X 22X 13X 100X
58X 30% 12X 100X
67X 18X 15X 100X
73X 25X 2X
100X
67X 20X 13X 100X
62% 26X 12X 100X
68X 16X 16X 100X
73X 26X 2X
lom
65X 22X 13X 100X
62X 26X 12X 100X
66X 17X 17X 100X
71X 27X 2X
100X
63X 24X 13X 100X
60X 27X 13X 100X
64X 18X 18X 100X
70X 28X 2X
1Q0X
60X 25X 15X 100X
S8X 28X 14X 100X
61X 18X 21X 100X
68X 30X 2X
100X
56X 27X 17X 100X
55X 29X 16X 100X
55X 18X 27X 100X
66X 32X 2X
100%
Source: Dataquest
June 1986
3.4.6-4 1986 Dataquest Incorporated July CCIS Markets
4 Mapping Application^
4.1 Mapping Definitions
The mapping CAD market segment comprises products that are used to create maps. Figure 4.1-1 shows Dataquest's view of the mapping segment, including the Steps involved in making maps and the major markets for systems used to create maps.
MAJOR MARKETS
The types of businesses that would use a mapping system would be those that:
• Have the responsibility for or ownership of large tracts of land and resources
• Have the need to locate discrete or continuous facilities
• Are concerned with the distribution of customers or services
Each of the major market segments shown in Figure 4.1-1 fits into one or more of these categories.
We believe that the federal government, with its many agencies and branches, is the largest user of mapping systems. We also believe that the oil and gas industry has been (and will continue to be) a major market segment, with its millions of acres of land and ocean floor to keep track of, along with the locations of wells, property lines, and topographical information. Most utilities and local governments have found the cost of a mapping system far too prohibitive and, therefore, do not yet constitute a large portion of the overall market.
Dataquest believes that mapping systems are gaining widespread use among the world's cartographers, surveyors, civil engineers and site planners, photogrammetrists, geophysicists, utilities engineers, and a range of other types of users.
SYSTEM FUNCTIONALITY AND OUTPUT
As shown in Figure 4.4-1, the most common output of a mapping system is a map, which might include topographical (contour) maps, seismic maps, parcel/property maps, utility maps, street network maps, thematic maps, forestry maps, and planimetric maps. Mapping systems may include the following functions:
• Line/point geometry capture
• Polygonal processing
• Survey traverse entry (COGO)
CCIS Markets © 1986 Dataquest Incorporated July 4.1-1.
4.1 Mapping Definitions
• Digital terrain modeling/topographic processing
• Interactive graphics editing
• Graphic digitizing
• Edge matching
• Polygon overlay/retrieval
• Vector/grid cell conversion
• Proximal analysis
• Network analysis
• Spatial query
• Coordinate filtering
• Image processing
• Transformation
More Than Just a Map
For many users, automation of mapping is just one part of a total information planning/management process. / ^ equally important function is facilities management—keeping track of information on geographically dispersed plants and equipment. Utility companies are a good example. The utilities market segment fits into the category "have the need to locate discrete or continuous facilities," which might mean telephone poles and wires In the case of telephone utilities or sewers in the case of sewer districts. In these environments, maps are one part of an overall information management effort; these users often place as much as, if not more, emphasis on the data base management capabilities of a system than on its graphics capabilities.
Mapping systems that offer strong data base management capabilities are often referred to as mapping/geographic information systems (M/GIS) or mapping/ facilities management systems (M/FMS). Both types of systems offer the graphics functionality required for generating maps while also fulfilling a wide range of information management requirements. Additional capabilities provided in a full-scale data base management/mapping system might include tabular data entry, file management, statistical analysis, query/browsing, and report generation.
4.1-2 © 1986 Dataquest Incorporated July CCIS Markets
4.1 Mapping Definitions
Figure 4.1-1
Mapping
Data Management
Analysis
Editing
Data Capture
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 4.1-3
4.2 Mapping Executive Summary
This summary highlights the key points and analyses discussed throughout this chapter. Please refer to the chapter in its entirety for a comprehensive analysis of the mapping applications segment.
• The CAD/mapping market is forecast to grow from $220 million in 1985 to $720 million in 1990.
• This segment represents one of the fastest-growing CAD segments in terms of both system shipments and revenue, with 60 percent and 27 percent compound annual growth rates, respectively, forecast through 1990.
• We believe that host-dependent systems will continue to be the predominant architecture in mapping because of the requirements of many potential users for large and centralized data bases.
• We believe that in the long run, data conversion service bureaus will benefit the most from the market's forecast growth.
• We also believe that success stories on the part of current users have had, and will continue to have, a positive influence on the growth of the mapping segment.
• Digital's Micro VAX n product will contribute greatly (both as a host-dependent and as a standalone system) to the growth of the market, especially since two out of four of the major mapping vendors offer mainly VAX-based systems.
CCIS Markets © 1986 Dataquest Incorporated July 4.2-1
4.3 Mapping Market Overview
HISTORY
Evolution
Dataquest estimates that nearly 75 percent of the installed mapping systems were sold after 1978, even though the first systems became available during the early 1970s. Compared with other computer-aided applications (particularly mechanical and AEG), this timing indicates a much slower acceptance process by the overall base of potential users of mapping systems. Dataquest believes that many users had difficulty justifying the switch to a mapping system for the following two major reasons:
• High hardware costs
• The enormous amount of time and expense involved in the conversion effort from a manual to an automated mapping process (Conversion costs typically run 5 to 10 times the hardware and software costs.)
Until the late 1970s, computers with large storage capacities were required for graphics work, particularly for mapping work. Within the past few years, however, the cost of hardware tools has dropped dramatically, while their capacity for handling graphics and computation-intensive work has increased significantly. This has been a boon for mapping vendors and users alike. However, the prohibitive element still remained—map data conversion. On the average, data conversion costs represent the largest portion of the overall expenditures in automating a mapping and record-keeping process. Thus, the process of automating manual mapping procedures has been far too expensive for many potential users to consider.
CAD, Mapping, or Information Management?
Mapping, like most of the other applications that utilize CAD tools (e.g., EDA, IC, PCB), demands much more than 2-D drafting functionality (see section 4.1-1 for a list of functions). The earliest mapping systems available from the traditional CAD vendors automated only those tasks associated with drafting. And those systems were termed map drafting systems. The traditional CAD vendors that provided these earliest map drafting systems included Auto-trol, Calma, Computervision, and Litergraph.
Several vendors, including IBM, Environmental Systems Research Institute (ESRI), and Synercom Corporation, have adhered to more of a data base management approach since their entry into the mapping market. We believe that this approach has begun to work in their favor, as several markets (particularly utilities and most government sectors) recognized the benefits of using complete mapping/information management tools. We also believe that these particular markets divided over the issue of integrated graphics/data base management systems such that several of the early vendor participants (especially Auto-trol and Calma) have lost momentum as a result of not addressing the issue.
CCIS Markets © 1986 Dataquest Incorporated July 4.3-1
4.3 Mapping Market Overview
Intergraph addressed the information management issue during 1977 and 1978, first with the Data Management and Retrieval System (DMRS) and later (in 1978) with a linkage capability between the DMRS and its graphics software offerings. In addition to addressing the data management issue, Dataquest believes that a number of other factors have contributed to Litergraphic's success over the years in the mapping segment. They include:
• Multifunctional systems incorporating drafting/design capability as well as mapping-related functionality, which has appealed to the engineering-oriented user markets (i.e., utilities)
• Early migration to a 32-bit platform based on a proven line of computing hardware from Digital Equipment Corporation
• A broad range of solutions for mapping, including extensive graphics functionality suitable for stringent cartographical requirements
Computervision Corporation has also offered systems for mapping (since the mid-1970s). Although it immediately became a major force in this market segment with more than a 30 percent market share during 1979 and 1980, Computervision's revenue declined sharply in 1983 and have since continued to do so. Dataquest attributes much of Computervision's downturn in the mapping segment to the following key factors:
• Its failure to respond quickly enough to the market's transition from a 16-bit hardware architecture to a 32-bit architecture
• The company's decision to offer a proprietary hardware platform when commercially available computers such as Digital Equipment's PDP and VAX series were gaining widespread acceptance in the general mapping/CAD market
• Computervision's limited applications offerings and data base management functionality
The marketing and product strategies of each of the vendors have naturally determined how their systems are positioned. Regardless of the terminology used to describe their respective offerings (e.g., CAD system, mapping system, GIS system, or FM system), according to Dataquest's definition, the system will always offer a user the ability to create maps.
4.3-2 © 1986 Dataquest Incorporated July CCIS Markets
4.3 Mapping Market Overview
THE PRESENT
We believe that those vendors that plan to remain competitive in the mapping segment will be focusing primarily on the issues of improved data base management/information handling capability and expansion of application offerings. However, any improvements made to current mapping offerings might prove futile unless prospective buyers are ready to commit the enormous amounts of time and money usually required for conversion from manual mapping to automated mapping practices. In our opinion, the conversion issue is the major roadblock to growth in this industry segment.
The recent proliferation of conversion service bureaus is allowing more users to pursue the alternative of automating mapping. Map and record conversion (building the data base) is the focal point during the early stages of a project. An unsuccessful conversion process would set a user back in both time and dollars.
Users who defer the conversion process to a service company usually find that it decreases the inherent risk associated with implementing a mapping system because the major hardware and software purchases sometimes can be delayed until the conversion stage is under way or even near completion. Hardware cost reductions and early obsolescence are critical issues in the evaluation and purchase of mapping systems.
Existing opportunities for current vendors are:
• The conversion service market itself as an emerging user market
• Conversion service companies as vehicles of exposure for mapping vendors' systems
Conversion service companies are usually equipped with at least one of the commercially available mapping systems. In some cases, partnership agreements have been forged between a conversion service and a vendor, allowing the latter to take advantage of the former's knowledge and expertise in a specific industry.
A prime example is the Synercom/AT&T agreement, which was executed during February 1985. The contract is based on AT&T's use of Synercom mapping systems and specialized application software (OPIS 3) for outside plant information management. AT&T intends to use Synercom's system as a means of establishing a foothold in the lucrative data conversion business. Telephone companies now have a single source of contact for their outside plant map and record conversion needs. This arrangement also gives telephone companies the ability to postpone hardware and software purchases; AT&T will allow its telephone company customers to interface with the converted data base through a time-share type of terminal and/or Synercom workstation. Synercom's exposure in the telephone utility market has increased considerably as a result of this and similar contract agreements.
CCIS Markets © 1986 Dataquest Incorporated July 4.3-3
4.3 Mapping Market Overview
It will always be true that no benefits can be realized from computerized mapping until the data are converted. Therefore, Dataquest believes that conversion service companies will benefit handsomely as more users decide to commit the resources of both time and dollars toward implementing an automated mapping system (and information management system for some).
TRENDS
We believe that advances in data capture technology and the proliferation of low-cost microprocessor-based mapping systems will play a major role in the growth of this segment during the remaining half of this decade. Our forecasts for growth in this segment are also based on one other major factor—success stories, which have prompted increased user awareness of the benefits derived from automating the mapping process.
Low-Cost Systems
With the two-year stint of microprocessor-based workstation announcements having passed, we believe that many current vendors (as well as new entrants) in the mapping market will seek to take advantage of the latest standalone and PC-based hardware by making software available on one or both of these platforms. As it stands now, this will afford vendors the chance to tap what we believe is a large potential base of users that have been waiting for a low-cost alternative.
However, what usually denotes a low-cost system today (i.e., engineering workstation or personal computer) could be very different next year, as the price of hardware in general continues to decline. Therefore, even a host-dependent system (which refers to a central CPU and attached workstations) will eventually fall into the low-cost category, especially when compared with the prices of the past. The issue will really be one of central versus distributed processing data bases.
Dataquest believes that vendors will need to optimize offerings (particularly those witli true data base management systems) to address both the central and distributed processing issues.
Scanner Technology
In no Other application is scanning (automated digitizing) such a critical issue. We believe that the mapping market will benefit greatly (in terms of increased growth) once the issues surrounding scanning are resolved. Two of those issues involve raster-to-vector conversion and the features-recognition capability of a scanning system. While both have been solved to a great extent, the technology is extremely costly for many users to even consider. So as this form of data capture follows the trend of most technology-driven products (i.e., price erosion), we envision greater throngs of users pursuing the alternative to manual mapping methods: automated mapping methods.
4.3-4 © 1986 Dataquest Incorporated July CCIS Markets
4.4.1 Total Mapping CAD/CAM
This section covers the total mapping CAD/CAM market for all regions and product types. Market data are presented in Figures 4.4.1-1 Revenue and 4.4.1-1 Shipments and Table 4.4.1-1.
• The mapping segment was worth an estimated $220 million in 1985 and is forecast to grow to $720 million in 1990, a compound annual growth rate (CAGR) of 27 percent.
• Dataquest estimates that revenue will increase 31 percent in 1986, reaching $288 million.
• An estimated 432 systems were shipped in 1985; shipments are forecast to reach 4,572 in 1990, reflecting a 60 percent CAGR through the period.
• An estimated 1,752 workstations were shipped in 1985; shipments are forecast to reach 9,762 units in 1990, growing at a 41 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 4.4.1-1
4.4.1 Total Mapping CAD/CAM
Millions of Dollars
Figure 4.4.1-1 Revenue
Mapping CAD/CAM—Worldwide
720
640
560
480
400-^
320
240
160
80
^
^
^
^
^
w» sH'isiss.
vSsks
M ^ ^ ^SSS>i .X 'vXV' i
s^--..^%>.
y^M • '\ X \ ,X
m&^ ^ ^
XV-X^ Sxvv^^ W'-AX
^
t x :
^
K-Si'^: ps^-iS^
Kvw '••X-'^^-S^
^^s^x ^^ssS^
^ ^ x > , >
k ^ 1 , C V v V
t$l5$S^, \ X % . \ S '\%,'\W
cC'w:' X\\>A \'vW\
1^ ^
^ > ss ^>i.
1985 1986 tS67 1988 1989 1990
Source: Dataquest June 1986
4.4.1-2 1986 Dataquest Incorporated July CCIS Markets
4.4.1 Total Mapping CAD/CAM
Figure 4.4.1-1 Shipments
Mapping CAD/CAM—Woi;ldwide
Workstation Shipments
10000-
9000
8000
7000-
6000
5000
4000
3000
2000
1000
\ -i,. - 'v % %.
•>'N<Xv 7<!^.X KV'^'\:
iV'vN
^M
%.'^%.xi
k -•!.: %. V V '
V-V''»V\ ^ ' W ^ - X V%,X:vV
\ \v\X
^N'^^^^j
V ^ '• '
ASW
tw>; C\XVS"
XW
;w igas 19S6 1987 1986 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 4.4.1-3
4 .4.1 Total Mapping CAD/CAM
Table 4.4.1-1
Mapping CAD/CAM—Worldwide Total Applications
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market
Revenue
Systems Workstations
220 432
1,752
288 2,153 3,866
375 3,276 5,714
476 3,661 7,001
590 4,083 8,425
720 26.7% 4.527 60.OX
9,762 41.OX
Source: Dataquest June 1986
4-4-1-4 © 1 9 8 6 Dataquest Incorporated July CCIS Markets
4.4.2 Mapping Market Shares
This section covers Dataquest's forecasts for and analysis of the mapping market share distribution. Market share data are presented in Figure 4.4.2-1 and Table 4.4.2-1.
• Intergraph Corporation continues to dominate the sale of systems used for mapping.
• Dataquest attributes Intergraph's dominance in this market during the past few years to several factors:
— Early entry into the marketplace
— Products that serve a wide range of mapping applications
— Continuous expansion of its product line
— Proven product line based on Digital Equipment's VAX line with Intergraph's graphics hardware enhancements
— Multifunctional systems (CAD for other applications and mapping)
• Intergraph's 1985 revenue from mapping systems totaled $135 million, which represented approximately 61 percent of total 1985 revenue for this application segment.
• Despite a substantial growth in revenue during 1985, Intergraph lost market share, falling from a 72 percent share in 1984 to 61 percent in 1985.
• Dataquest believes that IBM and Synercom Corporation represented one part of the reason behind Intergraph's substantial loss in market share during 1985, as both companies experienced significant revenue gains; the Other side of the equation takes into account the addition of companies to Dataquest's roster of companies for the mapping segment.
• These three top companies continue to penetrate the mapping segment with mostly host-dependent offerings; Intergraph is currently the only company among the three that does not unbundle software, while Synercom has gone to the Other extreme by becoming mostly a software vendor (it does still market its own graphics workstations).
• The Other Turnkey and Software Companies category comprises companies that have $15 million or less in total revenue.
•
•
Dataquest believes that Syscan, of Oslo, Norway, is the largest European company in the mapping segment (included in the Other European Companies category), with an estimated $15 million in revenue for 1985.
In the Other Far Eastern Companies category, we believe that Fujitsu is the largest vendor, with an estimated $8 million in revenue for 1985.
GCIS Markets © 1986 Dataquest Incorporated July 4.4.2-1
4.4.2 Mapping Market Shares
Figure 4.4.2-1
Mapping Market Share—Worldwide 1985
Computervlslon 2.0%
Source: Dataquest June 198S
4.4.2-2 1986 Dataquest Incorporated July CCIS Markets
4.4 .2 Mapping Market Shares
Table 4.4.2-1
Mapping Market Share—Worldwide (Millions of Dollars)
COMPANY
Intergraph
IBM
Synercom CoIiputervision Autodesk
SDRC Calcomp
Other Computer Companies
Other Europe Companies
Other Far East
Other Turnkey i All Companies
Companies
and Software
1985 REVENUE
$
$ $
$
$
$
$
$
$
$ $
$
135
26 17
4
1
1
1
1
22
12 1
220
Source:
1985 SHARE
61.2% 11.9%
7.7%
2.0%
.6%
.3%
.3%
.4%
9.9%
5.5%
.2%
100.0%
Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 4.4.2-3
•
4.4.3 Mapping by Region
This section covers Dataquest's forecasts for and analysis of the mapping market, segmented by region. The data are presented in Figures 4.4.3-1 Revenue and 4.4.3-1 Shipments and Tables 4.4.3-1 and 4.4.3-2.
• We believe that the United States will dominate consumption of mapping systems through 1990, with revenue of $145 million in 1985, growing to an estimated $472 million in 1990, a 27 percent CAGR.
• We expect all of the regions to remain at a fairly constant percentage of revenue through 1990.
• Europe had revenue of $47 million in 1985 and is forecast to grow to $156 million in 1990, a 27 percent CAGR.
• The Far East segment had $18 million in 1985 and is forecast to grow to $60 million in 1990, a 27 percent CAGR.
• The Rest of World segment had $10 million in 1985 and is forecast to grow to $33 million in 1990, a 27 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 4.4.3-1
4.4.3 Mapping by Region
Figure 4.4.3-1 Revenue
Mapping CAD/CAM by Region
Millions of Dollars
500
450-
400
350
300
250
200
150
100
1985 taee 1987 1986 WBSf 1990
Source: Dataquest June 1986
4.4.3-2 1986 Dataquest Incorporated July CCIS Markets
4.4.3 Mapping by Region
This section covers Dataquest's forecasts for and analysis of the mapping market, segmented by region. The data are presented in Figures 4.4.3-1 Revenue and 4.4.3-1 Shipments and Tables 4.4.3-1 and 4.4.3-2.
• We believe that the United States will dominate consumption of mapping systems through 1990, with revenue of $145 million in 1985, growing to an estimated $472 million in 1990, a 27 percent CAGR.
• We expect all of the regions to remain at a fairly constant percentage of revenue through 1990.
• Europe had revenue of $47 million in 1985 and is forecast to grow to $156 milUon in 1990, a 27 percent CAGR.
• The Far East segment had $18 million in 1985 and is forecast to grow to $60 million in 1990, a 27 percent CAGR.
• The Rest of World segment had $10 million in 1985 and is forecast to grow to $33 million in 1990, a 27 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 4.4.3-1
4.4.3 Mapping by Region
Figure 4.4.3-1 Revenue
Mapping CAD/CAM by Region
Millions of Dollars
500
450
400 -
350
300
250
200
150
100.
A X
North America
Europe
Far East
ROW
1985 1S86 1987 1988 1989 1990
Source: Dataquest June 1986
4.4.3-2 1986 Dataquest Incorporated July CCIS Markets
4.4.3 Mapping by Region
Figure 4.4.3-1 Shipments
Mapping CAD/CAM by Region
Workstation Shipments
6300
5600
4900
4200
3500
2800
2100i
1400
700
1985 1966 1987 1968 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 4.4.3-3
4 .4.3 Mapping by Region
Table 4.4.3-1
Mapping CAD/CAM Application by Region
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total HarIcet Revenue Systems Workstations
Kortti America
Revenue
Systems Workstations
Europe Revenue
Systems Workstations
Far East
Revenue
Systems Workstations
Rest of World
Revenue
Systems Workstations
220
432 1,752
145 201
1,135
47
182 372
18 37
162
10
12
84
288 2,153 3,866
189
1,221 2,369
62 767
1,097
24
79
234
13 87
166
375 3,276 5,714
246 2,082 3,751
81 864
1,351
31
206 373
17
125
239
476 3,661 7,001
312 2,077 4,468
103
970
1,632
40
445
573
22 168
328
590 4,083 8,425
387
2,110 5,336
127 1,170
1,986
49
593
681
27
211
422
720 4,527 9,762
472 2,264 6,263
156 1,341
2,251
60 701
750
33
221
498
Source:
26.7X 60.OX 41.OX
26.7X 62.3X 40.7X
26.8X 49. IX
43,4X
26.9X
79.7X
35.9X
26.7X
80.OX
42.8X
Dataquest
June 1986
4.4.3-4 1986 Datequest Incorporated July CCIS Markets
4.4.3 Mapping by Region
# Table 4.4.3-2
Mapping CAD/CAM Application by Region
(Percent of Total)
1985 1986 1987 1988 1989 1990
North America
Revenue Systetns UorIcstations
Europe
Revenue Systems Workstations
Far East ReverKie Systems
Workstations
Rest of World
Revenue
Systems
Workstations
66%
47X 65X
22X 42X
21%
8X 9X 9X
5X 3X
5X
66X 57X
61X
22X 36X
28X
8X 4X
6X
5X
4X
4X
66X 64X
66X
22X 26X 24X
8X 6X
7X
5X
4X
4X
66X 57X 64X
22X 26X
23X
8X
12X 8X
5X
5X
5X
66X 52X 63X
22X 29X
24X
8X 15X
8X
5X
5X 5X
66X
SOX 64X
22X 30X 23X
8X 15X
8X
5X
5X
5X
Source: Dataquest
June 1986
OCXS Markets © 1986 Dataquest Incorporated July 4.4.3-5
4.4.4 Mapping Product Types
The following section covers Dataquest's forecasts for and analysis of the C/^/CAM mapping market, segmented by product type. The data are presented in Figures 4.4.4-1 Revenue and 4.4.4-1 Shipments and Tables 4.4.4-1 and 4.4.4-2.
• Revenue from host-dependent systems dominated in 1985, accounting for $215 million, or 98 percent of all mapping revenue.
• Host-dependent workstation shipments also dominated in 1985, Host-dependent workstation shipments also c representing 90 percent of all workstation shipment!
• Dataquest forecasts that host-dependent workstation shipments and revenue will continue to dominate through 1990, accounting for 63 percent of workstation shipments and 17 percent of system shipments.
• We expect a sharp escalation in 1986 in both standalone and personal computer-based system shipments, as much more software is now available for mapping applications on these two types of hardware platforms.
• We believe that sales of standalone workstation-based systems will eventually outdistance sales of both host-dependent and personal computer-based systems due to the exceptional price/performance characteristics of this system architecture.
CCIS Markets © 1986 Dataquest Incorporated July 4.4.4-1
4.4.4 Mapping Product Types
Figure 4.4.4-1 Revenue
Mapping CAD/CAM by Product Type—Worldwide
Millions of Dollars
540-
480
420-
360-
300-
240-
180-
120-
60 -
Ul
• •
Standalone
Host-Dependent
Personal Computer
—"^-X-1
—A — i
A i
A ii 1
1985 1986 1987 1983 1989 1990
Source: DMaouMi June 1986
4.4.4-2 1986 Dataquest Incorporated July CCIS Markets
4.4.4 Mapping Product Types
Figure 4.4.4-1 Shipments
Mapping CAD/CAM by Product Type—Worldwide
Workstation Shipments
6300-
5600
4900-
4200
3500-
2800
2100
1400
700
• Standalone
• Host-Dependent
^ Personal Computer
1985 1986 1987 1968 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 4.4.4-3
4.4.4 Mapping Product Types
Table 4.4.4-1
Mapping CAD/CAM—Worldwide Application by Product Type
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market
Revenue Systems Workstations
Standalone
Revenue Systems Workstations
Host-Dependent Revenue
Systems Workstations
Personal Computer
Revenue
Systems Workstations
220 432
1.752
2 26
26
215 256
1,577
3 149 149
288 2,153
3,866
20 201
201
260 328
2,041
8 1,624 1,624
375 3,276 5,714
50
512
512
311 442
2,880
14
2,323 2,323
476
3,661 7,001
99 1,036
1,036
362 569
3,910
15 2,056
2,056
590
4,083 8,425
164 1,724 1,724
411 691
5,033
15
1,668 1,668
720 4,527 9,762
256
2,681 2.681
451 771
6,006
13
1,075 1,075
26.7X
60.0% 41.0%
160.9X 152.2%
152.2%
16.0% 24.7% 30.7%
31.9%
48.4% 48.4%
SOURCE: Dataquest' June 1986
4 .4 .4 -4 1986 Dataquest Incorporated July CCIS Markets
4.4.4 Mapping Product Types
Table 4.4.4-2
Mapping CAD/CAM—Worldwide Application by Product Type
(Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone Revenue
Systems Workstations
Host-Dependent
Revenue Systems
Workstations
Personal Computer
Revenue
Systems
Workstations
U 6% 1%
98% 59X 90%
1% 35% 9%
7% 9% 5%
90% 15% 53%
3% 75% 42%
13% 16% 9%
83% 13% 50%
4% 71% 41%
21% 28% 15%
76% 16% 56%
3% 56% 29%
28% 42% 20%
70% 17% 60%
3% 41% 20%
36% 59% 27%
63% 17% 62%
2% 24% 11%
SOURCE; Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 4.4.4-5
•
4.4.5 Mapping Turnkey Average Prices
This section covers Dataquest's forecasts for and analysis of the average price per seat by product type for the mapping turnkey segment. The data are presented in Figure 4.4.5-1 and Table 4.4.5-1.
• We believe that the average price per seat for mapping will decrease from $97,300 in 1985 to $50,000 in 1990, which represents a negative 12 percent CAGR.
• Most personal computer-based mapping systems still offer only the functionality that is inherent in most CAD systems—map drafting; this is largely the reason behind a relatively low average price per seat of $16,600 in 1985.
• We believe that personal computer-based systems will continue to automate only the mapping applications that do not require high cartographical standards; therefore, we estimate that the average selling price for these systems will remain at a fairly constant level through 1990.
• Host-dependent systems had the highest average price in 1985, at $107,100 per seat, and will continue to do so until 1988, when the average price per seat of standalone product types is forecast to be greater, at about $64,700 per seat, compared with $43,600 per seat for host-dependent product types.
CCIS Markets © 1986 Dataquest Incorporated July 4.4.5-1
4.4.5 Mapping Turnkey Average Prices
Thousands of Dollars
Figure 4.4.5-1
Mapping Turnkey—Worldwide Average Price per Seat
00-
80-
60
40-
20-
0 -
L *
- ~ r
A
• • A
i-A'
Standalone
Host-Dependent
Personal Computer
I - * 11
1985 1986 1»7 1988 1S83 1990
Source: Dataquest Jane 1986
4,4.5-2 © 1986 Dataquest Incorporated July CCIS Markets
4 .4 .5 Mapping Turnkey Average Prices
Table 4.4.5-1
Mapping Turnkey—Worldwide Average Price per Seat (Thousands of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types
Standalone Host-Depeixlent Personal Coniputer
97.3
54.8
107.1 16.6
86.7
73.1
96.1 16.5
71.8 70.9
78.8
.16.4
62.7
68.8 64.7 16.4
55.3 66.7
53.1 16.4
50.0 -^2X 64.7 3%
43.6 -16% 16.3 -0%
Source: Dataquest June 1986
CCIS Markets © 1986 Dataquest Incorporated July 4.4.5-3
4.4.6 Mapping Revenue Sources
This section covers Dataquest's forecasts for and analysis of the mapping market, segmented by revenue source. The data are presented in Figure 4.4.6-1 and Tables 4.4.6-1 and 4.4.6-2.
• We estimate that hardware accounted for 62 percent of total revenue in 1985; we estimate that the hardware portion of revenue will decrease through 1990 to 44 percent in that year.
• Software revenue is expected to increase from 22 percent of total revenue in 1985 to 36 percent in 1990, representing a 40 percent compound annual growth rate.
• Revenue from service is also expected to increase as a percentage of total revenue through 1990. In 1985, service represented 16 percent of revenue, and in 1990, service is expected to make up 20 percent of total revenue.
CCIS Markets © 1986 Dataquest Incorporated July 4.4.6-1
4.4.6 Mapping Revenue Sources
Figure 4.4.6-1
Thousands of Dollars
Mapping CAD/CAM—Worldwide Applications by Revenue Source
320
2SD
240
200-
• Hardware
• Software
A Service
1B0-
120
1985 1966 1987 1988 1989 1990
Source: Dataquest June 1986
•
4.4.6-2 1986 Datequest Incorporated July eCIS Markets
4.4.6 Mapping Revenue Sources
Table 4.4.6-1
Mapping CAD/CAM—Worldwide Applications by Revenue Source
(Millions of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
A l l Product Types
Hardware
Software Service
Total
Standalone Hardware Software Service
Total
Host-Dependent
Hardware
Software
Service
Total
Personal Coinputer
Hardware
Software
Service
Total
137 48 35 220
1 1
0 2
135
45
35 215
1
2
0
3
170 73
45 288
10
9
2 20
157
59
44
260
3
5 0
8
212 103 59 375
24
21 4 50
183
73
55 311
5
9 0
14
255 143 78 476
46 44
9 99
204
89
69
362
4
10
0
15
292 193 106 590
73
75 16 164
216 107
89
411
4
11
0
15
319 256 145 720
105 123
29 256
212
123
116 451
2 11
0
13
Source:
18X 40X 33X 27%
153%
170%
176X
161X
9X
22X
27X 16X
13X
39X 32X
32X
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 4.4.6-3
4.4.6 Mapping Revenue Sources
Table 4.4.6-2
Mapping CAD/CAM—Worldwide Applications by Revenue Source
(Percent of Total)
1985 1986 1987 1988 1989 1990
Al l Product Types Hardware Software Service
Total
standalone Hardware Software Service
Total
Host.Dependent Hardware Software Service
Total
Personal Computer
Har t^re
Software
Service
Total
62X 22X 16X
100%
48X 41X 8X
100X
63X 21X 16X toox
36X 63X IX
100X
59X 25X 16X 100X
49X 42X
ex 100X
61X 23X 17X 100X
36X 64X TX
100X
57X 28X 16X 100X
48X 43X 9X
100X
59X 23X 18X 100X
33X 66X IX
100X
54X SOX 16X 100X
47X 44X 9X
100X
56X 2SX 19X 100X
28X 71X IX
100X
49X 33X 18X 100X
44X 46X
tox 100X
52X 26X 22X 100X
23X 76X IX
100X
44X 36X 20X 100X
4tX 48X 11X toox
47X 27X 26X 100X
17X 83X IX
100X
Source: Dataquest
June 19^
4.4.6-4 1986 Dataquest Incorporated July OCXS Markets
5.1 EDA Definitions
DEFINITION
The electronic design automation (EDA) segment refers to CAD/CAM products that are typically used in the engineering or design phase of electronic products (as opposed to the physical layout of the products). EDA system users are most often electrical engineers.
The most common output of an EDA system is a net list—a logical or functional description of an integrated circuit, printed circuit board, electronic system, or product. The output is used to analyze the performance or functionality of the circuit and is also used in another product design phase to manually or automatically create the physical layout.
EDA systems may include the following functionalities:
• Schematic capture
• Logic simulation
• Circuit simulation
• Timing verification
• Test pattern generation
• Fault simulation
• Thermal analysis
• Net list extraction (NLE)
• Microprocessor development interfaces
• Software engineering
• Engineering documentation
• Interfaces to external CAD/EDA tools
Because of significant differences between the marketing and product strategies for EDA, IC, and PCB CAD, Dataquest will continue to differentiate and segment the electronic CAD/CAM market in this manner. Therefore, by definition, EDA does not include layout.
CCIS Markets © 1986 Dataquest Incorporated July 5.1-1
5.2 EDA Executive Summary
This summary highlights the key points and analyses discussed throughout this chapter. Please refer to the chapter in its entirety for a comprehensive analysis of the EDA applications segment.
• The EDA market is forecast to, grow from $531 million in 1985 to $1.3 billion in 1990, representing a 21 percent CAGR.
• The EDA market is forecast to grow only 19 percent in 1986 because of the economic conditions of the overall electronics industry and a slowdown in several vendors' annual revenue.
• In 1985, the personal computer accounted for 72 percent of all EDA workstations shipped, but for only 27 percent of all EDA revenue.
• Standalone workstations, which accounted for 60 percent of all EDA revenue in 1985 and 27 percent of all workstations shipped, are forecast to make up 76 percent of all units shipped and 85 percent of all EDA revenue in 1990.
• The average selling price per seat for all product types is expected to decline at a 12 percent CAGR, from $43,000 in 1985 to $23,000 in 1990.
• Dataquest anticipates much consolidation and retrenching among EDA vendors, with company roles and product offerings being redefined to adjust to the high number of vendors.
CCIS Markets © 1986 Dataquest Incorporated July 5.2-1
5.3 EDA Market Overview
EDA HISTORY
Prior to 1981, the emphasis of electronic CAD/CAM vendors was primarily on physical layout applications for both integrated circuits and printed circuit boards. However, the electronic product design process does not begin with physical layout, nor does it end with EDA applications.
Until the introduction of the first commercially available EDA product in 1981, there was a gaping hole in the line of products offered to companies that needed to automate the electronic product design process. Thus began the EDA segment of the CAD/C/^M industry—products for engineers that could be used to automate the engineering process of the product design cycle.
The market has not been the same since then. The depth of product functionality has expanded from simply straightforward schematics capture and logic design. New applications such as physical layout were integrated with EDA functionality. New hardware platforms were born virtually overnight. New companies entered the market, increasing the ante and the stakes.
Thus, the electronic CAD/CAM market has evolved to encompass EDA. The needs of the electrical engineers to increase productivity—to make the design cycle more efficient at the same time as shortening it—are finally being addressed by the $531 million 1985 market.
WKTi DATAQUEST CALLS TT EDA
One of the biggest underlying trends in the entire CAD/CAM market is the move toward providing computer-aided engineering (C/^) applications. CAE is used by engineers of all disciplines to automate the engineering and analysis phase of any product's design cycle. For instance, mechanical engineers apply CAE to their design tasks using applications such as stress analysis, kinematics, and finite element analysis. Dataquest believes that the vendors addressing the needs of electrical engineers have made such a significant impact on the way in which electronic products are designed, as well as on the CAD products themselves, that we chose to differentiate CAE for electrical engineers from all other CAE applications. Hence the term electronic design automation (EDA) for electronic computer-aided electrical engineering applications.
CCIS Markets © 1986 Dataquest Incorporated July 5.3-1
5.3 EDA Market Overview
EDA AND LAYOUT DISTINCTIONS
The leading EDA vendors' first product lines consisted of schematics capture. Shortly after introduction, schematics capture grew to encompass logic design, with various forms of analysis, simulation, and verification. Dataquest distinguishes between schematics capture and logic design by the following definitions:
• Schematics capture is the ability to graphically draw the electrical schematics, or logic diagram, of a product primarily for documentation purposes.
• Logic design includes schematics capture plus the ability to associate electrical parameters with the graphic schematic symbols, facilitating analysis and simulation.
Logic design is the more comprehensive of the two applications because it maintains information such as power, timing, and performance.
The three leading companies in 1985 also included printed circuit board and/or integrated circuit physical layout applications product lines.
Companies with physical layout products as their original entry into the ECAD market have also expanded their product functionality to include logic design. While we recognize that several leading physical layout companies have had schematics capture capabilities for many years, we distinguish between schematics capture as documentation and schematics capture as logic design with electrical connectivity.
Because EDA and physical layout functions can be highly integrated, especially with automatic layout dependent on EDA data, it is impossible to separate completely the two applications. Electronic product design does not end with logic design. Tiierefore, it is important to note the following regarding Dataquest's EDA segmentation:
• The EDA estimates and forecasts are for systems with EDA applications only.
• The EDA chapter refers to functionality. It is also applicable to IC and PCB physical layout products and segments and their respective chapters in this binder.
THE UNDERLYING ISSUES
Dataquest believes that technology is the key driver in the EDA segment, with marketing and sales acting as the vehicle in which it is delivered to the end user. As is most often the case when technology is the driver, an abundance of alternatives emerges when different avenues of product development are explored.
5.3-2 © 1986 Dataquest Incorporated July CCIS Markets
5.3 EDA Market Overview
The design choices presented by EDA products are many and varied. However, Dataquest believes that there are two clearly defined underlying issues steering the market. These issues are:
• Applications
• Hardware
Applications
The electrical engineering community has an insatiable appetite for EDA applications software, while the EDA vendors push the limits of technology and R&D to deliver solutions. Dataquest believes that the most significant and successful application development efforts are directed toward the following:
• Hierarchical design
• Analysis
• Test functions
• Integration
Hierarchical Design
We believe that it is imperative that EDA systems take advantage of hierarchical design methodologies because of:
• Increasing circuit complexity
• Application-specific designs
• The need to share design data among functional organizations within a company and/or with a company's outside manufacturer
The definition and implementation of hierarchical design has evolved as the EDA products themselves have matured. It involves a circuit or product design occurring in increasing levels of detail, with each new level directly correlating with the levels below and above it. In this way, engineers are not forced to deal with or manage massive amounts of detail without first visualizing the concept of the product.
The significance of hierarchical design is that it facilitates delegating design responsibility among many engineers and it allows the design to be analyzed in varying stages of completion. Successful EDA products allow users to implement their own variation of hierarchical design methodologies. In this way, users can take advantage of existing analysis and simulation products.
CCIS Markets © 1986 Dataquest Incorporated July 5.3-3
5.3 EDA Market Overview
Analysis
Perhaps even more significant than actual design methodology is the ability to analyze the design. Is it behaving correctly? Is it functionally doing what it was intended to? Is it performing to specification?
Circuit analysis involves simulating a design using software models and stimuli. It allows engineers to determine the details of a design prior to building a hardware prototype, with the obvious benefits of reducing costs and turnaround time.
The analysis products available can be categorized by the following functional types:
• Logic simulation—Functional analysis ranging in level of hierarchy, from gate- to block-level circuit descriptions
• Circuit simulation—Transistor-level simulation involving intrinsic electrical analysis
• Timing verification—Performance analysis involving the speed at which a circuit operates
• Fault simulation—/Analysis of the testability of a circuit involving test vectors and patterns
Test Functions
While the availability of products that interface design with test is growing, Dataquest believes that this is one application of EDA that is underdeveloped. Testing interfaces and automatic test vector generation are receiving a lot of R&D effort because of the amount of demand from users.
Traditionally, the transition of a design from a design engineer to a test engineer was a slow, error-prone, and tedious task. The test engineer created programs or stimuli for test equipment—logic analyzers to automatic test equipment (ATE)—that determined the correctness of a prototype, breadboard, or volume production part. It was virtually left up to the test engineer to determine which parts of the circuit should be tested, without necessarily knowing which paths were critical to test.
EDA systems, however, generate design data that can be used as input to test programs by indicating which parts of the circuit should be tested and by specifying the expected performance. The link between design and test should be automatic through the design data base itself.
As test software interfaces have become more applicable to the design environment, testing manufacturers have also developed entry-level test equipment that operates within the design—not test—environment for immediate prototype feedback that can be analyzed by the design engineer.
5.3-4 © 1986 Dataquest Incorporated July CCIS Markets
5.3 EPA Market Overview
The importance of testing cannot be underestimated, because as electronic CAD systems become more effective in dealing with complex product design, they, in effect, create a bottleneck at the testing phase. By incorporating testing capability in the initial design phase, i.e., design for testability, the design cycle itself becomes a closed and controllable loop, from concept to product delivery.
Integration
The proliferation of applications creates a new set of problems that must be dealt with effectively for EDA products to be productive and useful. The problem is integration—how to ensure that ECAD applications programs, design tasks, and people involved with the process can communicate with one another quickly, efficiently, and error free.
Integrating the entire design process into a cohesive and workable solution has been a hard, uphill battle for most EDA vendors and users. Litegration has often been an afterthought, evident by several data bases and editors residing within one system.
The workaround to a system that is not cleanly integrated is to include data base extraction products and postprocessors that allow different design tools to communicate with one another. While this workaround is not the optimal solution, it does provide a short-term alternative.
Hardware
The EDA segment emerged out of a need for products that solved electrical engineers' design problems. However, only with the emergence of the standalone, microprocessor-based workstation could this need be met.
The availability of standalone workstations revolutionized the ECAD market, including its design solutions and existing price and profit structures. Had the pioneering companies such as Apollo, Daisy, Sun, and Valid not developed the hardware vehicle, the EDA revolution might have been delayed for another three years---until the IBM PC.
Dataquest distinguishes between the hardware and application issues of the market. It is the application products that meet users' needs and the hardware products by which they are delivered. Users buy neither hardware nor software. They buy solutions to design problems, and these solutions are combinations of hardware and software.
However, hardware technology, implementation, and adaptation are changing underlying applications strategies. The major cause of this is the personal computer. The major effect is a dramatic shift in computational alignment—aligning application requirements with computer capabilities.
CCIS Markets © 1986 Dataquest Incorporated July 5.3-5
5.3 EDA Market Overview
The shift has brought about yet another layer of hardware to the EDA environment—the application accelerator, which decreases the time involved to complete one or more applications.
Application Accelerators
The EDA segment continues to pioneer hardware innovations and utility. Application accelerators are another example. We believe that there are three primary reasons for the development of accelerators:
• They filled a need that arose from a lack of computing power, first at the standalone level, then at the personal computer level.
• They keep computer power distributed and off of hosts and mainframes.
• They are a way of adding value and profit to product lines.
We believe that application accelerators are a workaround to standalone and PC performance shortcomings. We see an accelerator as a means to an end, not an end in itself. For example, we believe that the underlying need is the application, such as simulation and analysis. The constraint placed on the application need is that it be performed in an acceptable time frame.
The technology of most (although not all) accelerators is specialized, pipelined parallel processors that offload the main CPU. They are usually board sets that plug into the host or are in separate cabinets that communicate with the host. They generally exist because the original architecture is not capable of, or not configured to, process background tasks in an effective and timely manner.
Exceptions are accelerators that are optimized to particular applications, either through firmware or customized silicon. In any case, the exceptions are not general-purpose hardware and are an integral part of the application's operation. Customized accelerators are not easy for CPU manufacturers to duplicate for product enhancements.
TRENDS
The underlying issues—applications and hardware—are also the forces shaping the future of the EDA segment. (Corporate structures are also changing the way in which ECAD business is conducted; they are discussed below under "A Fragmented Market.")
5.3-6 © 1986 Dataquest Incorporated July CCIS Markets
5.3 EDA Market Overview
Applications
Dataquest believes that product development will continue to focus on the four levels of products discussed under "Underlying Issues": hierarchical design, analysis, test, and integration. We identify the following trends that affect each of these four levels:
• Single-point data bases that support both logic and physical design with one interface
• Hierarchical simulation supporting varying levels of design completion
• Mixed-mode simulation working with different levels of hierarchy and simulating varying design representations (such as gate, switch, or transistor levels)
• Integration with physical layout for back annotation and design verification
• Test patterns generated automatically through the design data base, possibly including logic sensitivity scan design (LSSD) methodology
• Immediate simulation feedback through either single-point data bases or application accelerators
• True systems design capability supporting simulation of multiple chips and boards, different physical layout representations, and packaging requirements
• High-level design synthesis
We believe that the overall theme of application trends is not focused on product features, but on increased scope. EDA products become an integrated design management tool set by incorporating not only more design tasks, but also analysis capabilities at varying degrees of completion. The result is a design management system—one that meets the needs of a project with many aspects and requirements.
Hardware Platforms—A Division of Labor
The hardware platforms on which EDA software run are radically changing the availability and feasibility of design automation for the mass end-user market. Listed below are the major causes of this change:
• Personal computers and coprocessors
• Application accelerators
CCIS Markets © 1986 Dataquest Incorporated July 5.3-7
5.3 EDA Market Overview
• Decreasing standalone prices
• High-end standalone systems
In all cases, price and performance are paramount. The trend, however, is toward the division of labor between the system workhorse and the personal, desktop design system. To manage this change, we believe that a very flexible and profit-oriented management style is required for the following reasons:
• Downward-revised revenue goals due to lower average selling prices
• Higher unit volumes required to meet revenue goals
• Revised distribution strategies due to higher volumes
• Revised support strategies due to larger installed bases and lower average selling prices
• Increased competition due to less formidable barriers to entry
The Economics of Labor Division
Two years ago, personal computers were barely considered a design automation alternative. Today, they threaten the very existence of the original EDA platform—the standalone workstation. We do not believe that standalones will be obsoleted by PCs (with or without coprocessors). We believe that what is occurring is just natural evolution.
It is a simple lesson of supply-and-demand economics. Dataquest believes that the end-user market will continue to force prices down across the board, especially where higher prices are unwarranted. End users will also continue to force increased performance, at a fair price and only when applications require it.
A FRAGMENTED MARKET
Revised corporate strategies are changing the way in which long-term successful EDA companies will do business. The major corporate changes that we believe are occurring include:
• Product development efforts:
— Platform-free software
— Open data bases
— Buy versus make hardware
5.3-8 © 1986 Dataquest Incorporated July CCIS Markets
5.3 EDA Market Overview
• Marketing strategies
— Niche versus full functionality
— Bundled versus unbundled software
• Strategic alliances
• Offshore alliances
The thrust of all the strategic decisions above involves adding value to either the distribution channel or the implementation of design automation systems.
We believe that no one company will be the leading supplier of all design automation software. Listead, we believe that the following scenario will transpire:
• Three to five companies will lead as suppliers of end-to-end design products.
• Ten to twenty companies will compete with major portions of design automation products.
• Five to ten companies will compete with niche products, with only one or two companies being leaders in any given product niche.
This scenario depicts electronic CAD/CAM companies, not just EDA applications. We believe that it is important to analyze the market in this way because of the interdependencies between logic design and physical layout.
Innovative product development will continue to occur. However, we believe that it will become more difficult for the mass vendor market to exploit innovations because of current product implementations. For example, once a data structure and data base are implemented and installed in the customer base, it becomes nearly impossible to change that structure to take advantage of an integrated, single-point data base. For this reason, we believe that the EDA and EGAD segments will continue to be fragmented throughout the decade.
CCIS Marlcets © 1986 Dataquest Incorporated July 5.3-9
5.4.1 Total EDA CAD/CAM
This section covers the total electronic design automation (EDA) CAD/CAM market for all regions and product types. Market data are presented in Figures 5.4.1-1 Revenue and 5.4.1-1 Shipments and Table 5.4.1-1.
• The EDA segment was worth an estimated $531 million in 1985 and is forecast to grow to $1,354 million in 1990, a compound annual growth rate (CAGR) of 21 percent.
• Dataquest estimates that revenue will increase only 19 percent in 1986, reaching $632 million.
• Dataquest estimates that 14,068 workstations were shipped in 1985. Shipments are expected to reach 42,895 units in 1990, growing at a 25 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 5.4.1-1
5.4.1 Total EDA CAD/CAM
Figure 5.4.1-1 Revenue
EDA CAD/CAM-Worldwide
Millions of Dollars
1600
1400
1200
1000
SOO
600
400
200
1965 1986 I8ffir 1988 1989 1990
Source: Dataquest JuneT986
5.4.1-2 1986 Dataquest Incorporated July CCIS Markets
5.4 .1 Total EDA CAD/CAM
Figure 5.4.1-1 Shipments
EDA CAD/CAM-Worldwide
Workstation Shipments 45000
40000
35000
30000
25000
20000 A
15000
10000
5000 I ^ 1 ^
'^ i ^ t , •t; 'I
NvC** W%^> ^^^\v
^
;g$s
m ss
^ ICsNJX
m '.''XV
-."''fc % , '•<
\--KXSS
i •.>:i
SS"
vH
w
1S85 1986 1987 1988 1989 1390
Source: Dataquest June 1986
CCIS Markets © 1986 Dataquest Incorporated July 5.4.1-3
5.4.1 Total EDA CAD/CAM
Table 5.4.1-1
EDA Turnkey Total Applications
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Harlcet
Revenue Systems Workstations
531 14,036 14,068
632 18,705
18,733
764 22,785 22,817
940 27,767
27,803
1,138
34,287 34,320
1,354 20.6%
42,873 25.OX 42,895 25.0%
Source: Dataquest June 1986
/
5.4.1-4 © 1986 Dataquest Incorporated July CCIS Markets
5.4.2 EDA Market Shares
This section covers Dataquest's forecasts for and analysis of the EDA CAD/CAM market share distribution. Market share data are presented in Figure 5.4.2-1 and Table 5.4.2-1.
• Mentor Graphics and Daisy Systems clearly dominated the 1985 EDA market with a combined 44 percent of the market.
• Mentor Graphics continued its role as EDA market leader in 1985. Dataquest ranks Mentor Graphics' market share at 24 percent, up from its 17 percent share in 1984.
• Second-ranked Daisy Systems garnered a 20 percent market share in 1985, up 9 percentage points from its 1984 position.
• Valid Logic maintained its number three position, capturing 9 percent of the market, down 2 points from its 1984 market share.
• Simulation tool vendor Zycad Corporation ranked fourth in the EDA market with a 5 percent market share.
• FutureNet captured fifth position with a 4 percent share of the market.
• Given the fragmented nature of the EDA market, as well as significant 1986 market debuts of companies currently possessing no share of this market, such as Hewlett-Packard and IBM, we expect this year's market to be distributed among a larger vendor base.
CCIS Markets © 1986 Dataquest Incorporated July 5.4.2-1
5.4.2 EDA Market Shares
Figure 5.4.2-1
EDA Market Share by Company—Worldwide 1985
Cadnetlx t % -
Silvar-Llsoo 2%
Tektronix 2%
Computervislon 3%
Control Data 3%
Source: Dataquest June 198«
5.4.2-2 1986 Dataquest Incorporated July CCIS Markets
5.4.2 EDA Market Shares
Table 5.4.2-1
EDA Market Share by Company (Millions of Dollars)
COMPANY
Mentor Daisy
Valid
Zycad
Futurenet
Control Data Computervision
Tektronix
Silvar-Lisco
Cadnetix
Calma
Telesis
Racal-Redac Other Computer Conpanies
Other Europe Companies
Other Far East
Other Turnkey i All Companies
Companies
and Software
1985
REVENUE
$
$
$ $
$
$ $
$ $
$
$
$
$ $
$
$ $ $
127
107
49 26
20 14
13
11 11
8
4
2 1 79
10
20 29
531
Source:
1985
SHARE
23.9%
20.2%
9.2% 4.9%
3.7%
2.6%
2.5%
2.1% 2.1%
1.4%
.7%
.5%
.2% 14.9%
1.9%
3.8%
5.4% 100.0%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 5.4.2-3
5.4.3 EDA Regions
This section covers Dataquest's forecasts for and analysis of the EDA market, segmented by region. Market data are presented in Figures 5.4.3-1 Revenue and 5.4.3-1 Shipments and Tables 5.4.3-1 and 5.4.3-2.
• North America is expected to dominate regional EDA consumption.
• We estimate that 1985 North American revenue was $358 million and that it will grow to $912 million in 1990, a 21 percent CAGR.
• European revenue was $106 million in 1985 and is forecast to reach $271 million in 1990, growing at a 21 percent CAGR.
• The Far Eastern segment was worth $66 million in 1985 and is forecast to grow at a 21 percent CAGR to reach $169 million in 1990.
• The rest of the world accounted for $1 million, less than 1 percent of EDA revenue. We estimate that it will grow to $2 million in 1990, 21 percent CAGR.
• We believe that North America, with 67 percent of the total market, will remain the largest consumer of EDA products because of the two following interrelated variables:
— Worldwide distribution of electronic product manufacturers
— A disproportionate amount of in-house-developed software among the Japanese electronic product manufacturers
• The Far East, with 12 percent of worldwide consumption, is not forecast to increase because of the large amount of in-house software.
• We expect Europe to maintain a fairly constant 20 percent of worldwide consumption.
CCIS Markets © 1986 Dataquest Incorporated July 5.4.3-1
5.4.3 EDA Regions
Figure 5.4.3-1 Revenue
EDA CAD/CAM by Region
Millions of Dollars 1000
900
800-^
700
600-^
500
400
300
200-^
100
1985 tms 1987 1988 1989 1990
Source: Dataquest June 1986
5.4.3-2 1986 Dataquest Incorporated July CCIS Markets
5.4.3 EDA Regions
Figure 5.4 .3-1 Shipments
EDA CAD/CAM by Region
Workstation Shipments 30000
27000
24000
21000
18000-
15000
12000
9000^
6000
3000
1985 1966 1987 1988 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 5.4.3-3
5.4.3 EDA Regions
Table 5.4.3-1
EDA Turnkey Applications by Region
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market
Revenue Systems
Workstations
North America
Revenue Systems Uorkstatioiis
Europe Revenue
Systems
Workstations
Far East
Revenue
Systems
Workstations
Rest of World Revenue
Systems
Workstations
531 14,036
14,068
358 10,692 10,686
106 2,424
2,422
66
916
953
1
5
6
632 18,705
18,733
426 13,131 13,154
126 3.241
3,245
79 2,319
2,320
1
14
14
764
22,785
22,817
515 15.957
15,981
153 3,906
3,912
95 2.897
2,899
1
25
25
940
27,767
27.803
633 19,255
19,281
188 4,900
4,907
117
3,577
3,579
t
36
36
1,138 34,287
34,320
766 23,581 23,606
228 6.212
6,218
142
4,449
4,451
2 45
46
1,354 42.873
42,895
912 29,219
29,237
271 7,985
7,987
169
5,612
5,613
2
57
58
Source:
20.6X 25.0%
25. OX
20.6X 22.3%
22.3X
20.7X
26.9X
27. OX
20.7%
43.7X
42.6X
20.5%
64.0X
57.6%
Dataquest
June 1986
5.4.3-4 © 1986 Dataquest Incorporated July CCIS Markets
5.4.3 EDA Regions
Table 5.4.3-2
EDA Turnkey Applications by Region
(Percent of Total)
1985 1986 1987 1988 1989 1990
North America
Revenue
Systems
Workstations
Europe
Revenue
Systems
Workstations
Far East
Revenue
Systems
Workstations
Rest of World
Revenue
Systems
Workstations
67X 76% 76%
20%
17% 17%
12% 7%
7%
0%
0%
0%
67%
70% 70%
20%
17% 17%
12% 12%
12%
0%
0% 0%
67% 70% 70%
20% 17%
17%
12%
13%
13%
0%
0% 0%
67% 69% 69%
20%
18%
18%
12%
13%
13%
0%
0%
0%
67% 69%
69%
20%
18% 18%
12% 13%
13%
0%
0%
0%
67% 68% 68%
20%
19%
19%
12%
13%
13%
0%
0%
0%
Source: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 5.4.3-5
5.4.4 EDA Product Types
This section covers Dataquest's forecasts for and analysis of the EDA market, segmented by product type. Market data are preseneted in Figures 5.4.4-1 Revenue and 5.4.4-1 Shipments and Tables 5.4.4-1 and 5.4.4-2.
• Standalone revenue in 1985 was $317 million and will grow at an estimated 29 percent CAGR to reach $1,149 million in 1990.
• Standalone workstation shipments totaled 3,864 units in 1985 and are forecast to reach 32,421 units in 1990, growing at a CAGR of 53 percent.
• Revenue from host-dependent systems was $71 million in 1985 and is forecast to decline to $26 million in 1990, decreasing at a CAGR of -18 percent.
• Host-dependent workstation shipments totaled 114 units in 1985 and are forecast to decrease at a 16 percent CAGR to 48 units in 1990.
• PC revenue in 1985 was $143 million and is expected to reach $211 million in 1990, a CAGR of 8 percent.
• PC shipments totaled 10,089 units in 1985 and are forecast to grow at less than a 1 percent CAGR to reach 10,425 units in 1990.
• The EDA segment is by far dominated by revenue derived from standalone sales.
• Host-dependent products play virtually no role in the EDA segment for two reasons:
— Price-sensitivity and price-elasticity market requirements
— Distributed processing requirements with equal performance for all users
• The PC's major role will be in entry-level schematics entry products, with limited analysis capabilities.
• PCs with application-Specific hardware add-ons (i.e., coprocessors) will be capable of assuming more computationally intensive tasks.
• Networking, communications, and data base management are key issues with the large number of distributed systems.
• We believe that the growth rate of standalone systems will continually increase as a result of improved price/performance ratios, i.e., a decrease in average selling prices.
• Host-dependent systems will be used for batch analysis jobs and relieved of interactive graphics applications.
CCIS Markets © 1986 Dataquest Incorporated July 5.4.4-1
5.4.4 EDA Product Types
Figure 5.4.4-1 Revenue
EDA CAD/CAM by Product Type
MIIIIons of Dollars
1400-
1200
1000
800
600
400
200
• Standalone
• Host-Dependent
A Personal Connputer
1985 1S66 1987 1988 1989 1990
Source: Dataouest June 1986
5.4.4-2 © 1986 Dataquest Incorporated July CCIS Markets
5.4.4 EDA Product Types
Figure 5.4.4-1 Shipments
EDA CAD/CAM by Product Type
Workstation ShiprrIGnts
36000 -
32000
28000
24000
20000
16000
12000
8000
4000
• Standalone
• Host-Dependent
A Personal Connputer
1985 1986 1987 1968 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 5.4.4-3
5 .4 .4 EDA Product Types
Table 5.4.4-1
EDA Turnkey Application by Product Type
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Totst Market Reverue Systems Worlcstatfons
StwKlatane Revenue
Systems Itorlcstations
Host-D^endent
Revenue Systems
Workstations
Personal Computer Revenue
Systems
Workstations
531 14,036 14,068
317
3,864 3,864
71
83
114
143
10,089
10,089
632 18,705 18,733
416 6,606
6,606
49
61 90
167 12,037
12,037
764 22,785 22,817
532
9,874 9,874
43
58
90
190
12.853
12,853
940
27,767 27,803
698
15,063
15,063
39
55
90
204
12,650
12,650
1,138
34,287 34,320
902
22,414 22.414
33
44
77
202 11,830
11,830
1,354
42,873
42,895
1,149
32,421
32,421
26 26
48
179
10,425
10,425
20.6X 25.0% 25. OX
29.4X 53.OX
53.OX
•18.3X
-20.6X
-15.8X
4.6X .7X
.7X
SOURCE: Dataquest June 1986
5.4.4-4 1986 Dataquest Incorporated July CCIS Markets
5.4.4 EDA Product Types
Table 5.4.4-2
EDA Turnkey Application by Product Type
(Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone Revenue
Systems Workstations
Host-Dependent
Revenue Systems
Workstations
Personal Computer
Revenue Systems
Workstations
60% 28% 27%
13% 1% 1%
27% 72% 72%
66% 35% 35%
8% 0% 0%
26% 64% 64%
70% 43% 43%
6% 0% 0%
25% 56% 56%
74% 54% 54%
4% 0% 0%
22% 46% 45%
79% 65% 65%
3% 0% 0%
18% 35% 34%
85% 76% 76%
2% 0% 0%
13% 24% 24%
SOURCE: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 5.4.4-5
5.4.5 EDA Turnkey Average Prices
This section covers Dataquest's forecasts for and analysis of the average selling price per seat for an EDA turnkey system. Average selling prices are presented in Figure 5.4.5-1 and Table 5.4.5-1.
• We expect the average selling price for all product types to decline from $43,000 in 1985 to $22,800 in 1990, decreasing at a 12 percent CAGR, as a result of both the large number of vendors offering EDA capability and the industry-wide shift toward lower-cost workstations.
• We expect a 17 percent decrease in the average price per standalone seat, from $62,700 in 1985 to $25,200 in 1990. We believe that this will be a consequence, of the introduction of lower-cost standalone workstations, as well as of a sharp decline in the price of EDA software, which we believe is becoming almost a commodity item in the ECAD market.
• Consistent with this shift, the average price per seat for host-dependent systems will decline at a CAGR of 16 percent, from $333,400 in 1985 to $141,400 in 1990, according to our estimates. We also believe that the price/performance advantages of standalones and the popularity of personal computers are eroding the market for and the price of, host-dependent EDA workstations.
• We expect a 12 percent decline in the average price per seat for personal computers, from $25,300 to $13,600 in 1990. This will be the slowest decline for all product types and will be a result of two unique data management, computational, and communications requirements this application imposes on the personal computer.
CCIS Markets © 1986 Dataquest Incorporated July 5.4.5-1
5.4.5 EDA Turnkey Average Prices
Figure 5.4.5-1
EDA Turnkey Average Price per Seat
Thousands of Dollars
320
280
240
200-
120
80
• Standalone
• Host-Dependent
A Personal Computer
1985 1986 1987 1988 1989 1990
Source: Dataquest June 1986
5.4.5-2 1986 Dataquest Incorporated July CCIS Markets
5.4.5 EDA Turnkey Average Prices
Table 5.4.5-1
EDA Turnkey Average Price per Seat (Thousands of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types
Standalone Host-Dependent
Personal Computer
43.0 62.7 333.4
25.3
38.3 48.3 298.0
22.7
33.7 41.1 247.5 20.7
29.7
34.9 • 205.4
18.4
26.0 29.7
170.3
16.0
22.8 -12X
25.2 -17% 141.4 -16%
13.6 -12%
Source; Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 5.4.5-3
5.4.6 EDA Revenue Sources
This section covers Dataquest's forecasts for and analysis of the EDA market, segmented by source of revenue for each product type. Revenue data are presented in Figure 5.4.6-1 and Tables 5.4.6-1 and 5.4.6-2.
• We expect hardware revenue for all product types to decline from 53 percent of total revenue in 1985 to 42 percent in 1990.
• Software revenue, which accounted for 40 percent of total EDA revenue in 1985, will grow at a 25 percent CAGR to account for 47 percent of total 1990 revenue. We believe that this shift reflects increased emphasis on applications and data base management issues rather than on hardware platforms, which are becoming standardized.
• We expect service revenue to grow at a 32 percent CAGR between 1985 and 1990. We believe that this grov^h in service revenue reflects response to user demand for increased application support.
CCIS Markets © 1986 Dataquest Incorporated July 5.4.6-1
5.4.6 EDA Revenue Sources
Millions of Dollars
Figure 5.4.6-1
EDA CAD/CAM Revenue by Product Type
720-
640
560
480
400
320
240
160
80
• Hardware
• Software
A Service
T
1969 1985 1986 1987 1988 1990
Source: Dataquest June 1986
5.4.6-2 1986 Dataquest Incorporated July CCIS Markets
5.4.6 EDA Revenue Sources
Table 5.4.6-1
EDA CAD/CAM Revenue by Product Type
(Millions of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
A l l Product Types
Hardware
Software Service
Total
Standalone Hardware Software Service
Total
Host-Dependent
Hardware
Software
Service
Total
Personal Coniputer Hardware Software Service
Total
282
212 37
531
U9 141
27
317
40
24
7
71
93 47
3 143
336
252 44
632
204 177
35 416
25
19
5 49
107
56 3
167
394
315 56 764
254
230 47
532
21
17
5 43
119 67
4 190
462 403 75
940
321 311
66
698
17
17
5
39
124
76 4
204
521 512 104
1,138
391 416
95
902
12
16
5 33
119 80 4
202
563 642 149
1,354
456
552 141
1,149
7
15
5
26
100 76 4
179
Source:
15% 25% 32% 21X
25%
31% 39%
29%
-30%
-10%
-8%
-18%
1% 10% 5%
5%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 5.4.6-3
5.4.6 EDA Revenue Sources
Table 5.4.6-2
EDA CAD/CAM
Revenue by Product Type
(Percent of Total)
1985 1986 1987 1988 1989 1990
At t PFoduit Types Marc&iare software Service
Totat
Standalone
Hardware
Software
Service
Total
Host-Depenctent
Harcbtare
Software
Sei*vice
Total
Personal CoRiputer
Harcftiare
Software
' Service
Total
53X
40X
7X
100%
47X
45%
8X 100X
56X
34X
10X
100X
65X
33X
2X
toox
53X
40X
7X
100X
49X
43X
8X
100X
SIX
39X
10X
toox
64X
34X
2X
10QX
52X
41X
7X
100X
48X
43X
9X
100X
48X
41X
11X
100X
^X
35X
2X
toox
49X
43X
S0i 100%
4&X
45X
9X
100X
44X
44X
12X
100X
61X
37X
2X
10QX
4»
45X
9X
100X
43X
46X
tix 100X
37X
49X
14X
100X
59X
39X
2X
lOffiC
42X
47X
11X
100X
40X
48X
12X
toox
26X
56X
18X
100X
56X
42X
2X
1Q(»
Source: Dataquest
June 1986
5.4.6-4 1986 Dataquest Incorporated July CCIS Markets
6.1 IC Definitions
DEFINITIONS
The Integrated Circuit (IC) CAD/CAM market segment comprises products that are used to create geometric descriptions of integrated circuits. The output of an IC CAD system is data to be read by or formatted for a pattern generation device. By definition, an IC CAD system's output is pattern generation data.
The scope of the IC CAD segment includes the following types of products, functionalities, and methodologies:
• Mask geometry creation and editing
• Layout verification, including:
— Design rule checking
— Electrical rule checking
— Net list comparison
• Gate array place and route
• Cell place and route
• Silicon compilation
• PLA compilation
• Symbolic layout
• Spacing and compaction
Dataquest references two distinct classes of IC design methodology: handcrafted and automatic. Handcrafted IC design methodologies refer to products on which a layout designer physically creates the geometric description of the circuit's transistors based on a schematic typically created by an IC design engineer. Handcrafted design methodologies require extensive graphics editing capabilities, regardless of whether symbolic transistor representations are used.
Conversely, automatic IC design methodologies refer to products that will automatically create mask geometries based on logical or functional descriptions, without the manual intervention of a layout designer. Included in this subsegment are gate array or cell-based place and route products, silicon compilers, and PLA compilers. The distinguishing factor is the integration and close coupling of the logical and physical circuit descriptions.
CCIS Markets © 1986 Dataquest Incorporated July 6.1-1
6.1 IC Definitions
Dataquest differentiates EC AD products based on the system's output; either logical/functional net lists or physical descriptions. With the development and acceptance of automatic IC layout products—and by their definition they include close coupling and integration of logical or functional descriptions with physical descriptions—IC CAD products may include EDA functionality. Depending on the nature of the product and the degree of integration, an automatic IC CAD product may also include the ability to describe the chip's functionality. This description may be in the form of gate, functional, architectural, or language levels.
6-1-2 © 1986 Dataquest Incorporated July CCIS Markets
6.2 IC Executive Summary
This summary highlights the key points and analyses discussed throughout this chapter. Please refer to the chapter in its entirety for a comprehensive analysis of the IC C/UD/CAM applications segment.
• The IC CAD market is growing frorri $198 million in 1985 to an estimated $762 million in 1990, representing a 31 percent compound annual growth rate (CAGR).
• The scope of IC CAD products is quickly changing from high-priced, host-dependent, polygon-pusher systems to lower-priced, standalone systems that are coupled with front-end design and provide some degree of automatic layout.
• We expect the average selling price per seat to decrease 9 percent from $92,100 to $58,900 between 1985 and 1990.
• Dataquest believes that design alternatives that focus on solutions to end-users' problems are essential for vendors selling IC CAD products.
• As the number of design alternatives increases, the segment is becoming crowded with vendors, implying that:
— Traditional vendors' market share positions are being challenged and threatened
— Relationships with silicon manufacturers are critical to IC design
— Product lines need to be broad and deep to keep pace with integrated circuit alternatives
CCIS Markets © 1986 Dataquest Incorporated July 6.2-1
6.3 IC Market Overview
HISTORY
Evolution
Unlike any other CAD/C/\M application, IC CAD is required for integrated circuit product design. Virtually no VLSI can be designed without the use of CAD in some form or another. The sophistication, complexity, and capabilities of IC CAD/CAM products must maintain equal or near pace with the nature of the products being designed.
Gordon Moore of Intel Corporation has a theory that the number of transistors per integrated circuit doubles approximately every two years, and IC CAD/CAM products, too, have evolved in that way. From the early 1970s, IC CAD systems have evolved from comparatively simple digitizing systems to "polygon-pushers" with full manual editing functionalities of the late 1970s and early 1980s, and from these products to the current sophisticated placement and routing products for application-specific integrated circuits (ASICs). Today, commercially available silicon compilers are adding yet another dimension to the complexity and sophistication of IC C/VD/CAM tools.
Shifts in Focus
The IC CAD segment has long been dominated by Applicon, Calma, and Computervision with their "polygon-pushers" and manual editing systems. However, systems offering automated design methodology alternatives, particularly for gate array and cell-based implementations, are gaining in popularity.
IC CAD vendors have neglected the logical and functional IC design issues by primarily focusing on physical layout or mask geometries. Product development and enhancements have tended to concentrate on layout and performance issues, such as:
• Graphics
• Editing
• Design rule checking
• Pattern generation
• General program operations
However, by virtually ignoring design automation solutions for IC design engineers, traditional IC CAD vendors have neglected to protect their customer bases by not providing a continuous stream of new and related products. As a result, several new companies were formed to address specifically electronic design
CCIS Markets © 1986 Dataquest Incorporated July 6.3-1
6.3 IC Market Overview
automation (EDA) applications. These companies—particularly Daisy, Mentor, and Valid—have provided front-end engineering design automation solutions to the customer bases of the traditional IC CAD vendors, thus eroding the traditional vendors' customer bases.
Pricing Umbrellas
Average system and workstation prices have historically been on the high side, for several reasons:
• Unavailability of lower-priced hardware with adequate performance and storage capacity
• A critical requirement for CAD, with no alternative methodologies or products
• Relatively few competing vendors
An umbrella was created for new products and vendors to enter the market with lower-priced solutions due to what seemed unreasonably priced products. As a result, several new companies were formed with lower average selling prices as their main product strategies. However, the market leaders' dominance prevailed. Those entering the market on a price basis alone discovered that they could not compete effectively against the established vendors, at least not to any meaningful degree. The three companies that entered the market segment with lower prices as their primary differentiation were Avera, Metheus, and Via. Avera is now out of business, and Metheus and Via have redefined their product strategies so that price is no longer their primary product differentiation.
THE PRESENT
IC CAD products are no longer available from a limited number of vendors. Newly established entrants bring new ideas—methodologies, interfaces, strategic alliances, hardware platforms—to a market that was formerly dominated by three vendors. With nearly 20 companies currently offering IC physical layout solutions, IC CAD is no longer considered magical or mystical—just difficult.
Automatic Layout
Traditional IC CAD vendors failed to react quickly to the marketing opportunities for ASIC design and layout tools. Dataquest believes that this occurred for several reasons:
• Primary focus on performance enhancements to manual editing functions and related analysis
6.3-2 © 1986 Dataquest Incorporated July CCIS Markets
6.3 IC Market Overview
• Lack of integrated and closely coupled front-end EDA products
• Concentration on the solution, not the problem
As such, end-users' ASIC CAD needs were first addressed by companies other than the traditional vendors.
The high degree of expertise and knowledge required to develop ASIC CAD products brought about yet another rash of companies—both semiconductor companies and CAD vendors—entering the IC CAD segment.
Methodology
With new companies come new design methodologies. The IC CAD market has evolved from one commercially available methodology—manual editing—to a variety of choices. The choice of design methodology is due in part to the ASIC market itself, as well as to evolving CAD techniques. Dataquest tracks three major IC design methodologies:
• Manual editing
• Place and route
• Silicon compilation
Each methodology offers users varying degrees of automation, integration, process dependence, and creativity, /^alyses and forecasts for each of the above methodologies will be published in subsequent Dataquest newsletters and service sections.
A Buyer's Market
In only five short years, the number of vendors selling IC layout solutions has increased dramatically. Dataquest recognizes three distinct groups of companies offering layout solutions. These groups are listed below, with a representative sample of companies in each classification:
• Traditional
— Applicon
— Calma
— Computervision
CCIS Markets © 1986 Dataquest Incorporated July 6.3-3
6.3 IC Market Overview
• Functionality challengers
—• Daisy
— Mentor
— SDA
— Seattle Silicon
— Silicon Compilers
— Silicon Design Labs
— Silvar-Lisco
— Tangent
--- Valid
• Semiconductor companies
— AMI
— IMP
— LSI Logic
— VLSI Technology
Each type of company offers its users distinct, although sometimes overlapping, advantages and disadvantages, as described in Table 6.3-1.
6.3-4 © 1986 Dataquest Incorporated July CCIS Markets
6.3 IC Marke t Overview
Table 6 .3-1
Strengths and Weaknesses of IC C A D Companies by Classification
Company Type
Traditional
Functionality Challengers
Semiconductor
strengths
Large installed base Manual editing PG interfaces Mature and stabilized
products
EDA integration Assorted methodologies ASIC focus Foundry interfaces Hardware platforms
Process expertise EDA integration Manufacturability
guarantee
Weaknesses
Automatic layout
Young and evolving products
Process dependent Few manufacturing
alternatives Design security
Source: Dataquest June 1986
Hardware Platforms
Hardware platforms have begun to play an important role in penetrating the end-user market. As recently as two years ago, almost 100 percent of IC CAD systems shipments were based on host-dependent architectures. (Refer to Section 6.4.1 for Dataquest forecasts and analysis of the IC CAD segment by product type.)
Standalone Workstations
With the introduction of standalone workstations for IC applications came the inherent benefits of standalones, listed below:
• Lower incremental cost, thus more affordability
• Distributed processing, thus maintaining constant performance levels regardless of the number of users (except in the case of large file transfers)
• Computational alignment, thus delegating design responsibilities according to system performance capabilities
CCIS Markets 1986 Dataquest Incorporated July 6.3-5
6.3 IC Market Overview
Nearly all of the functionality challengers offer standalone product architectures, as do most semiconductor challengers. In response to competition, Calma and Computervision now offer standalone workstations in addition to their traditional host-dependent systems.
Dataquest believes that standalone workstations will continue to play an increasing role in IC CAD applications; however, we recognize that they are not without their limitations, as listed below:
• Inadequate for placing and routing large circuits
• Slow when transferring large design files between engineers and layout designers
Host Dependent
Although host-dependent systems will continue to be used for IC design, Dataquest estimates that by 1990 they will account for only 2 percent of all IC CAD revenue, declining from 50 percent in 1985. We believe that host-dependent products will be used mainly as computational engines, especially for automatic layout applications.
However, with the introduction of Digital's Micro VAX n, IBM's RT PC, and Apollo's DN3000, Dataquest believes that there are very few host-dependent alternatives, except for IBM and its 4300 and 308X series.
Personal Computers
Due to large IC design data bases and their extensive storage requirements, Dataquest believes that personal computers will not play a major role in the IC CAD segment. Furthermore, due to the design process itself, it is difficult to partition the design into sizes small enough to be managed by personal computers.
We believe that the present role of the personal computer is limited to the design or compilation of programmable logic arrays (PLAs), because these devices are typically small enough to be handled by a personal computer.
To further substantiate this point, we know of isolated cases where it is possible to run efficiently IC CAD programs on a PC. However, because the value of the software disproportionately exceeds the value of the hardware, we do not believe that vendors will be able to receive an adequate return on their R&D, support, marketing, and sales investments to justify pursuing the PC as a viable hardware alternative.
Although we recognize that there will be exceptions, we believe that the majority of ICs will not be physically designed on a PC, even though at the logical level they could be designed on a PC.
6.3-6 © 1986 Dataquest Incorporated July OCXS Markets
6.3 IC Market Overview
TRENDS
The market will continue to explore and develop products for new design methodologies. Li general, any company considering entering the IC CAD segment and developing an IC CAD tool must provide an automated solution with clearly defined productivity benefits.
Because of highly automated and integrated layout tools, the layout design cycle bottleneck once again is decreasing. As such, Dataquest believes that a secondary focus (second to methodology) will concentrate on developing layout and layout analysis tools that improve on one or more of the following:
• Hierarchical data bases
• Logic, transistor, test, and layout integration
• Interactive place, route, simulation, and analysis
• Improved graphics and processing performance
• Project management and revision control
• Physical as well as behavioral model libraries
User-Controlled Layout
Dataquest believes that silicon manufacturers will begin to rely more on the users and the users' systems to perform layout. However, we believe that this will happen over time, as the following events occur:
• Layout programs stabilize to the point that they can be maintained, supported, and documented
• Process-independent programs incorporate enough process information to produce manufacturable circuits
• More users feel secure that they actually can perform layout, especially users that are not among the elite group of experienced IC designers
• Users feel confident regarding the manufacturability of a circuit in which they performed the layout
• Hardware performance increases and provides acceptable levels of interaction and response times
CCIS Markets © 1986 Dataquest Incorporated July 6.3-7
6.3 IC Market Overview
Third-Party Deals
Due to large R&D investments and expenses required for IC layout product development, we believe that more and more niche products will appear and succeed in the marketplace. Niche products may take the form of a layout methodology, routing, layout verification, or interfaces between IC design cycles.
Dataquest believes that most niche companies will opt for third-party distribution agreements out of necessity, due to large distribution expenses. However, we do not believe that a third-party agreement with any one particular company is a long-term competitive advantage for the mainstream IC CAD vendor, because of:
• The nature of niche companies and their need for distribution alternatives
• The fact that competitors will soon have the same product, or at least the same functionality, thus negating any advantage
Expanded Functionality
As all electronic CAD segments improve in terms of user acceptance, human engineering, connectivity, performance, and functionality, Dataquest believes that design data bases for both integrated circuits and printed circuits will merge into one. We believe that ASICs are the primary reason that this phenomenon will occur.
Future applications products, especially PCBs, will have to interface with IC products at some level so that the pins, power requirements, and performance of the custom IC can be integrated and simulated during printed circuit board design.
Dataquest believes that prime candidates to address this phenomenon will be companies that already have both custom IC and PCB applications product lines, due to the large development, support, and marketing efforts required of each application.
6.3-8 © 1986 Dataquest Incorporated July CCIS Markets
6.4.1 Total IC CAD/CAM
This section covers the total integrated circuit (IC) CAD/CAM market for all regions and product types and refers to Figures 6.4.1-1 Revenue and 6.4.1-1 Shipments and Table 6.4.1-1.
• The IC segment reached an estimated $198 million in 1985 and is forecast to grow to $762 million in 1990, at a compound annual growth rate of 31 percent.
• Dataquest estimates that revenue will increase 16 percent in 1986, reaching $230 million.
• Workstation shipments in 1985 were an estimated 1,419 units; shipments are expected to reach 8,945 units in 1990, growing at a 45 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 6.4.1-1
6.4^1 Total IC CAD/CAM
Figure 6.4.1-1 Revenue
IC CAD/CAM-Worldwide
Millions of Dollars 800
720
640
560
480
400
320
240
160
%ms 1986 1987 1968 1S89 1990
Source: Dataquest June 1986
6.4.1-2 © 1986 Dataquest Incorporated July CCIS Markets
6.4.1 Total IC CAD/CAM
Figure 6.4.1-1 Shipments
IC CAD/CAM-Worldwide
Workstation Shipments 10000
9000
8000
7000
6000
5000
4000
3000
2000
1000 sSSS sm^
1, -^ -V -v \ •
rsV-'-V K ^
•^'vW^'
pr^^ K S : ^ t^^ ^ ' ^ ^ !
^ C'-m < ^
> : ? $ ^ ^ ^ : ^
''ii, " \ % %-•
^ ^ | ? | ' A L ^ . % _ •• • ' "
f. •^j'J •'•'r. ^ j
• \ V ''••,., ' ^ -'f.
v<W"; fe#i ^ ^
ill 1985 1986 1987 1988 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 6.4.1-3
6.4.1 Total IC CAD/CAM
Table 6.4.1-1
IC CAD/CAM-Worldwide (Millions of Dollars/Actual Units)
Total Market
Revenue
Systems Workstations
1985 =S3S
198 1,196
1,419
1986 SSS3.
230 1,753 1,950
1987 3SSS
292 2.723 2,881
1988 ssss
392 4.164 4,280
1989 ssss
543 6,121 6.197
1990 ssss
762 8.903 8,945
Source:
CAGR S=B=
30.9% 49.4X 44.5%
Dataquest June 1986
6.4.1-4 © 198.6 Dataquest Incorporated July CCIS Markets
6.4.2 IC Market Shares
This section includes Dataquest's forecasts and analysis of the IC CAD/CAM market share distribution and refers to Figure 6.4.2-1 and Table 6.4.2-1.
• Calma continues to lead the IC CAD market in terms of revenue and system shipments, with nearly a 28 percent market share, down from 42 percent in 1984.
• Daisy moved into second place in 1985 with its market share estimated at approximately 14 percent.
• Applicon, the number two market leader in 1984, slipped to number six with a 2.3 percent market share in 1985.
• Computervision ranked number three, with approximately a 9 percent share of the 1985 market.
• As the market moves toward higher degrees of automation and integration, Dataquest believes that the market shares of the traditional IC CAD vendors (Applicon, Calma, and Computervision) are being eroded.
• Daisy, Mentor, and Valid are carving away at the traditional IC CAD positions of Applicon, Calma, and Computervision due to their standalone or automatic layout products.
• We expect new product announcements incorporating more automatic layout functionality and tightly coupled front-end design functions from virtually all IC CAD vendors.
CCIS Markets © 1986 Dataquest Incorporated July 6.4.2-1
6.4.2 IC Market Shares
Figure 6.4.2-1
IC Market Share—Worldwide 1985
Tel<tronlx 1.6%
Scientific Calculations
1.7% Appllcon
2 .3%
Control Data 2 .3%
SHvar-Llsco 3.7%
Source: Dataquest June 1986
6.4.2-2 1986 Dataquest Incorporated July CCIS Markets
6.4.2 IC Market Shares
Table 6.4.2-1
IC Market Share—Worldwide (Millions of Dollars)
COMPANY
Calma
Daisy
Computervision
Mentor
Valid
Silvar-Lisco
Control Data
Applicon
Scientific Call
Tektronix
Racal-Redac
Other Computer
Other Far East
Other Turnkey i
All Companies
"
:uIat ions
Companies
Companies
and Software
1985
REVENUE
$
$
$
$
$
$
$ $
$
$
$
$ $
$
$
55
27
18
10
8
7
5
5 3
3
1
1 21
35
198
Source:
1985
SHARE
27.7%
13.6%
8.9%
5.0%
4.1%
3.7%
2.3%
2.3%
1.7%
1.6%
.3%
.3% 10.8%
17.7%
100.0%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 6.4.2-3
6.4.3 IC Regions
This section includes Dataquest's forecasts and analysis of the IC CAD/CAM market segmented by region and refers to Figures 6.4.3-1 Revenue and 6.4.3-1 Shipments and Tables 6.4.3-1 and 6.4.3-2.
• North American CAD/CAM revenues were $123 million in 1985 and are forecast to grow to $473 million in 1990, at a 31 percent CAGR.
• In 1985, European CAD/CAM revenues were $37 million and, growing at a CAGR of 31 percent, are expected to reach $143 million in 1990.
• Far Eastern CAD/CAM revenues were $35 million in 1985 and are forecast to grow to $135 million in 1990, at a 31 percent CAGR.
• The rest of the world consumed $3 million worth of CAD/CAM in 1985, and revenues are forecast to grow at a 31 percent CAGR to reach $12 million in 1990.
• Dataquest believes that North America will dominate consumption of IC CAD systems through 1990, with a relatively constant 62 percent of worldwide shipments.
• The Far East, with 18 percent of worldwide consumption, is not forecast to increase due to the large amount of in-house-developed software used by the major IC manufacturers.
• Although the majority of vendors are actively establishing non-U. S. marketing organizations if they have not already, Dataquest does not anticipate any major shifts in current worldwide consumption of IC CAD systems, basically due to the distribution of IC manufacturers and consumption of ICs.
• We expect Europe to maintain a fairly constant 19 percent of worldwide shipments and consumption.
• IC manufacturers, particularly in Japan, tend to regard CAD tools as a proprietary, competitive advantage, as they do general manufacturing processes.
CCIS Markets © 1986 Dataquest Incorporated July 6.4.3-1
6.4.3 IC Regions
Figure 6.4.3-1 Revenue
IC CAD/CAM by Region
Millions of Dollars 500
450
400
350-
309
2sa
200
150
10©
50
o¥
A.
X
North America
Europe
Far East
ROW
->^ 19S5 1986 1987 1988 1989 1990
Source; Dataquest Junt 19S6
6.4.3-2 1986 Datequest Incorporated July CCIS Markets
6.4.3 IC Regions
Figure 6.4.3-1 Shipments
IC CAD/CAM by Region
Workstation Shipments
5400-
4800-
4200 i
3600-
3000-
2400-
1800-
1200-
600-
0>
• •
X
North America
Europe
Far East
ROW
I f ^
X X X * = 1 F
mm 1366 1987 1988 1969 1990
Sourest Dalaqu&st June 1986
CCIS Markets 1986 Dataquest Incorporated July 6.4.3-3
6.4.3 IC Regions
Table 6.4.3-1
IC CAD/CAM Application by Region
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Marlcet
Revenue
Systems Worlcstations
North America
Revenue
Systems Workstations
Europe
Revenue Systems
Workstations
Far East
Revenue
Systems
Workstations
Rest of World
Revenue
Systems Workstations
198 1,196
1,419
123
811 898
37 213
237
35
158
267
3
U
17
230
1,753 1,950
143
1,127 1.239
43
345
381
41
251
298
4
30
32
292 2,723
2,881
181
1,665 1,770
54 534
562
51 478
502
5
46 47
4
4
2
2
392 .164
,280
243
,560 ,639
73 797
821
69
738 750
6 69
70
543
6,121 6,197
337
3,780 3,832
102 1,155
1,173
96
1,085
1,091
9
101
101
762 8,903
8,945
473 5,513
5,540
143 1,665
1,677
135 1,579
1,583
12
146
146
Source;
30.9% 49.4%
44.5%
30.9%
46.7% 43.9%
31.0% 50.9%
48.0%
31.0% 58.5%
42.7%
30.9%
58.9%
53.3%
Dataquest
June 1986
6.4.3-4 1986 Dataquest Incorporated July CCIS Markets
6.4.3 IC Regions
Table 6.4.3-2
IC CAD/CAM Application by Region
(Percent of Total)
1985 1986 1987 1988 1989 1990
North America Revenue Systems
Workstations
Europe
Revenue
Systems Uorlcstations
Far East
Revenue
Systems
Workstations
Rest of World
Revenue
Systems
Workstations
62X 68% 63X
19X 18X
17X
18X
13X
19X
2X
IX
IX
62X
64X 64X
19X
20X 20X
18X
14X
15X
2X 2X
2X
62X
61X 61X
19X 20X 20X
18X 18X
17X
2X 2X
2X
62X
61X 62X
19X 19X 19X
18X 18X
18X
2X
2X
2X
62X 62X 62X
19X 19X
19X
18X
18X 18X
2X
2X
2X
62X 62X 62X
19X 19X
19X
18X
18X 18X
2X 2X
2X
Source: Dataquest
June 1986
CCIS Markets © 1986 Dataquest Incorporated July 6.4.3-5
6.4.4 IC Product Types
This section includes Dataquest's forecasts and analysis of the IC CAD/CAM market segmented by product type and refers to Figures 6.4.4-1 Revenue and 6.4.4-1 Shipments and Tables 6.4.4-1 and 6.4.4-2.
• The IC CAD market reached $198 million in 1985, and is forecast to grow at a 31 percent CAGR to $720 million in 1990.
• Approximately 1,419 workstation units shipped in 1985 and, growing at a 45 percent CAGR, we estimate that 8,945 workstations will be shipped in 1990.
• Standalone revenues were $97 million in 1985, and are forecast to reach $739 million in 1990, growing at 50 percent compounded annually.
• Approximately 917 standalone workstations were shipped in 1985, and are forecast to reach 8,416 workstation shipments in 1990, growing at 56 percent compounded annually.
• Host-dependent revenues were $99 million in 1985, and revenues are forecast to decrease at 31 percent CAGR through 1990, declining to $15 million.
• Host-dependent workstation shipments were 397 in 1985, and are forecast to decrease at 32 percent CAGR to 67 units shipped in 1990.
• Personal computer revenues were $2 million in 1985 and, growing at 32 percent compounded annually, are forecast to reach $8 million in 1990.
• An estimated 106 personal computers were shipped in 1985, and are expected to reach 462 units in 1990, growing at a 34 percent CAGR.
• Standalone system shipments surpassed host-dependent systems in 1985 due to lower costs per seat and less CPU degradation when performing graphics-intensive tasks.
• Revenues of standalone products will not surpass host-dependent revenues until 1986 due to lower cost per seat.
• Host-dependent systems will continue to be used due to large and computational-intensive processing requirements.
• Host-dependent systems' primary application will be design programs and methodologies that do not require extensive interactivity and that can run in background mode.
CCIS Markets © 1986 Dataquest Incorporated July 6.4.4-1
6.4.4 IC Product Types
• Personal computers will not be a major factor because of the inherent computational-intensive design tasks and large data bases. Dataquest believes that PCs will be used primarily for compilation of programmable logic arrays (PLAs).
• For the foreseeable future, personal computers will be used to serve as front-end (EDA) logic design entry systems for ICs, not for physical layout.
• Workstation performance is a key issue, especially the available disk drive and memory space, due to the large data bases involved.
• Graphics requirements are not as intensive as in mechanical or solids modeling applications. While not needing the high resolutions required by those applications, electronic CAD/CAM graphics do need near to real-time display and response speeds.
6.4.4-2 © 1986 Dataquest Incorporated July CCIS Markets
6.4.4 IC Product Types
Figure 6.4.4-1 Revenue
IC CAD/CAM by Product Type—Worldwide
Millions of Dollars
720-
640
560
480
400-
320
240
160
• Standalone
;V Host-Dependent
A Personal Computer
1985 1986 1987 1988 19Sg 1930
Source: DataqufSSI June^986
CCIS Markets 1986 Dataquest Incorporated July 6.4.4-3
6.4.4 IC Product Types
Figure 6.4.4-1 Shipments
IC CAD/CAM by Product Type—Worldwide
Workstation Shipments
8000-
7000-
6000-
5000-
4000-
3000-
2000-
lOOOi
i
0'-
• •
•
>
Standalone
Host-Dependent
Personal Computer
• • 1 1
* 1
A • 1
a it
tS8$ 1968 1987 1988 1989 1990
Source: Dataquest June 1986
6.4.4-4 1986 Dataquest Incorporated July CCIS Markets
6.4.4 IC Product Types
Table 6.4.4-1
IC CAD /CAM-Worldwide
Application by Product Type (Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Marlcet
Revenue
Systems Workstations
Standalone Revenue
Systems Workstations
Host-Dependent
Revenue Systems
Workstations
Personal Computer
Revenue
Systems Workstations
198
1,196 1,419
97 917 917
99 174
397
2
106 106
230 1,753
1,950
137
1,364 1,364
88 200
396
5
189
189
292
2,723 2,881
225 2,344 2,344
61 143
302
5
235 235
392 4,164 4,280
346
3,742 3,742
39 93
208
7
330
330
543
6,121 6,197
510 5,672 5,672
25 54
131
8
395 395
762 8,903 8,945
739 8,416 8,416
15 25
67
8
462
462
30.9% 49.4%
44.5%
50.1% 55.8% 55.8%
-31.4% -32.0%
-29.9%
31.9%
34.3%
34.3%
SOURCE: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 6.4.4-5
6.4.4 IC Product Types
Table 6.4.4-2
IC CAD/CAM-Worldwide Application by Product Type
(Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone
Revenue
Systems
Workstations
Host-Dependent
Revenue Systens
Workstations
Personal Computer Revenue
Systems
Workstations
49« 77% 65X
SOX 15X 28X
IX 9X 7X
60X 78X 70X
38X 11X 20X
2X 11X 10X
77X 86X SIX
21X SX 10X
2X 9X 8X
88X 90X 87X
10X 2X SX
2X 8X 8X
94X 93X 92X
SX IX 2X
IX 6X 6X
97X 95X 94X
2X OX IX
IX SX SX
SOURCE: Dataquest
June 1986
6.4.4-6 © 1986 Dataquest Incorporated July CCIS Markets
6.4.5 IC Turnkey Average Prices
This section includes Dataquest's forecasts and analysis of the average selling price per seat of IC turnkey systems and refers to Figure 6.4.5-1 and Table 6.4.5-1.
• The average selling price for all product types is expected to decline from $92,100 to $58,900, at a relatively slow rate of 8 percent CAGR between 1985 and 1990, which reflects both the increasingly sophisticated and complex nature of IC design software, as well as the intensive computational requirements of this application.
• The 8 percent decline in average selling price per seat is greatest in absolute dollars among host-dependent systems, from $199,700 in 1985 to $83,000 in 1990. This reflects the industry-wide preference for lower-cost. Standalone systems vis-a-vis the continuing necessity for this product type in full-custom IC design.
• The decline in price per seat is slowest among standalone workstations, decreasing at 5 percent CAGR between 1985 and 1990 from an average of almost $79,500 in 1985 to $61,100 in 1990, which we believe results from increasing demand for this product type.
• The 7 percent decline in price per seat for personal computer systems from $24,000 in 1985 to $16,300 in 1990, is below the average due to its limited applicability in IC design, as well as the high component cost of IC design software.
CCIS Markets © 1986 Dataquest Incorporated July 6.4.5-1
6.4.5 IC Turnkey Average Prices
Figure 6.4.5-1
IC Turnkey—Worldwide Average Price Per Seat
Thousands of Dollars 210-
180
150-
120
30
• Standalone
• Host-Dependent
A Personal Computer
t^ss 1966 1987 19019 1989 1990
Source: Dataquest June 1986
6.4.5-2 1986 Dataquest Incorporated July CCIS Markets
6.4.5 IC Turnkey Average Prices
Table 6.4.5-1
IC Turnkey—Worldwide Average Price per Seat (Thousands of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Prockjct Types Standalone Host-Dependent Personal Coniputer
92.1
79.5 199.7
24.0
85.1
75.8 U 9 . 6
22.3
73.7 72.0
129.8
20.9
66.7 68.4
112.1 19.4
62.6 65.0
96.8
17.9
58.9 -8% 61.1 -5% 83.0 -16% 16.3 -7%
Source: Dataquest
June 1986
CCIS Markets © 1986 Dataquest Incorporated July 6.4.5-3
6.4.6 IC Revenue Source
This section includes Dataquest's forecasts and analysis of the IC market segmented by source of revenue for each product type and refers to Figure 6.4.6-1 and Tables 6.4.6-1 and 6.4.6-2.
• Hardware, as a source of revenue for all product types, is forecast to decline from 50 percent of revenues in 1985 to 36 percent in 1990.
• Software revenues, which accounted for 36 percent of total IC CAD revenues in 1985, are expected to grow at a 38 percent CAGR, to account for 47 percent of total 1990 revenue. Dataquest believes that this shift reflects increased emphasis on applications and functionality rather than on hardware platforms that are standardizing.
• We believe that service revenues will grow at a 36 percent CAGR between 1985 and 1990, due to, among other reasons, the increasing application support required for ASIC design.
CCIS Markets © 1986 Dataquest Incorporated July 6.4.6-1
6.4.6 IC Revenue Source
Millions of Dollars
Figure 6.4.6-1
IC CAD/CAM-Worldwide Applications by Revenue Source
360
320
280
240
200-
leo
120
80-
• Hardware
• Software
A Service
1985 1966 1987 1988 1989 1990
Source; DatiiquesI Juneisse
6.4.6-2 1986 Dataquest Incorporated July CCIS Markets
6.4.6 IC Revenue Source
Table 6.4.6-1
IC CAD/CAM-Worldwide Applications by Revenue Source
(Millions of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
A l l Product Types
Hardware
Software Service
Total
Standalone Hardware Software Service
Total
Host-Dependent
Hardware
Software
Service
Total
Personal Coinputer
Hardware
Software
Service
Total
99
71 28 198
44 41
12 97
54
29 16
99
1 1
0
2
112
87 32 230
63 58 16 137
47
27
15
88
2 2
0
5
134
118 40 292
100
97 28 225
30
19 11
61
3
2 0
5
169 169 54
392
147 153 46 346
18
13 8
39
4 3
0 7
217
245 81 543
203 233 74
510
9
9 7
25
4 4
0
8
275
360 128 762
267 350
122 739
4
6
5
15
4 4
0
8
Source:
23% 38% 36%
31%
43% 53% 60% 50%
-40%
-28%
-20%
•31%
28%
36% 32%
32%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 6.4.6-3
6.4.6 IC Revenue Source
Table 6.4.6-2
IC CAD/CAM—Worldwide Applications by Revenue Source
(Percent of Total)
1985 1986 1987 1988 1989 1990
All Product Types Hardware Software Service Total
Standalone Hardware Software Service Total
Host-Dependent Hardware Software Service Total
Personal CaoIputer
Hardware
Software
Service
Total
SOX
36% 14%
100%
45% 43%
12% 100%
54%
29% 16%
100X
53X
43%
5X 100X
49X 38X
14X
100X
46%
42X
12% 100%
53%
30% 17X
100%
52X
42X
5X 100X
46% 41% 14%
100%
45% 43X
12% 100X
50X
32X 18X
100X
52X
44X
5X
100X
43% 43%
14% 100%
43% 44X
13X 100X
46%
33%
21% 100X
SOX
45X
5X
100X
40X 4SX
15X 100X
40X
46X
15X 100X
38X
36X 26X
100X
49X
47%
5X
100X
36X 47%
17X 100%
36%
47X 17%
100%
27X
38X 3SX
100X
4 ^
49%
SX
100X
Source: Datac test
June 1986
6.4.6-4 1986 Dataquest Incorporated July CCIS Markets
7.1 PCB Definitions
DEFINITION
The printed circuit board (PCB) CAD/CAM applications segment refers to CAD/CAM systems used to design printed circuit boards. Until recently, the functionality of PCB systems was limited to the physical layout or description of the board. Now, however, their functionality has expanded to include comprehensive logic design and analysis of PC boards. PCB CAD systems are typically used by drafters to create the layout of the traces and components to be placed on the board.
The output of a PCB system is the graphic description of the board's layout, which is used in various manufacturing stages. Output typically consists of the following:
• Photoplotter tapes
• Silk screens
• Insertion drawings
• Numeric control drill tapes
Design methodologies range from manual drafting systems to highly automated place and route systems. Manual systems require a drafting person to physically place components on the graphic representation of the board and interactively route each of the traces or connections. Automatic PCB systems vary in the degree to which the system will automatically place and route the components and traces. However, all automatic products work directly from the logical description of the board's functionality.
By definition, PCB output is manufacturing data. Because of automatic layout systems, including the integration and close coupling of logical and physical data, PCB products may also include EDA functionality.
CCIS Markets © 1986 Dataquest Incorporated July 7.1-1
7.2 PCB Executive Summary
This summary highlights the key points and analyses discussed throughout this chapter. Please refer to the chapter in its entirety for a comprehensive analysis of the PCB applications segment.
• The PCB segment grew 34 percent in 1985, reaching $477 million in revenue, compared with $355 million in 1984.
• The segment grew despite the slump in the general electronics industry, i.e., among the end users of PCB systems.
• Companies experiencing the strongest revenue growth in 1985 were those that sell distributed processing systems based on personal computers or Standalone workstations that are tightly coupled to EDA applications.
• Because the PC AT replacement product is expected to have a 32-bit microprocessor, we believe that 16-bit PC shipments will give way to higher-performance standalone workstations.
• Integration with EDA applications is critical for long-term survival.
• The value of software will increase more sharply than hardware; Dataquest forecasts that in 1990, 35 percent of revenue will come from software products.
• We forecast that hardware will fall to 44 percent of revenue in 1990, remaining that high because of an increase in application-specific hardware sales.
CCIS Markets © 1986 Dataquest Incorporated July 7.2-1
7.3 PCB Market Overview
HISTORY
PC drafters have long used PCB CAD systems to create board geometries. However, systems have gone through many phases prior to reaching their present day functionality. These phases are as follows:
• Early 1970s—Artwork-only systems, on which designers manually placed all components and drew traces. Artwork-only systems were both Standalone and host-dependent architectures and were priced in excess of $150,000.
• Late 1970s—Combinations of batch automatic place and/or route systems. These systems were often awkward and difficult to use, rarely resulting in 100 percent routing completion. Systems of this type were generally host-dependent and were priced in the $500,000 range.
• 1980—Reentrant automatic place and routing systems. While still relatively awkward to use, they did allow designer intervention. They were generally host-dependent, and still priced in the $500,000 range when fully configured. They had improved graphics capabilities.
• 1982—16-bit Standalone architectures, which mostly used manual methods and had little automatic place and route capability. Depending on design method, prices ranged from $90,000 to $175,000.
• 1983—PC-based systems, which were basically artwork-only methods. Prices ranged from $8,500 to $15,000 depending on the PC configuration and the complexity of drafting software and its interfaces.
• 1984—Automatic and reentrant place and route on 16/32-bit standalone architectures with good interactive graphics. They were priced between $75,000 and $150,000. Vendors started to incorporate EDA functionality.
• 1985—PC-based systems with automatic and reentrant place and route software, some with EDA functionality. Prices ranged from $10,000 to $20,000.
Although these transitions occurred over the past 15 years, the most innovative development activity has taken place in the last four years. Dataquest believes that the last four years have experienced the most change for several reasons:
• Increasing board complexity, size, density, and functionality created a need for more powerful and flexible CAD products.
• CAD hardware and software developments occurred that allowed these boards to be designed at a cost acceptable to a price-sensitive market.
CCIS Markets © 1986 Dataquest Incorporated July 7.3-1
7.3 PCB Market Overview
Because of the previous PCB systems' high price tags and their reputations of being not so easy to use, target markets were limited to those companies that had to have CAD systems. There remained large and untapped markets that could buy if the price was low enough and the system was functionally "easy" to use by designers and drafters who spent a large portion of their time doing tasks other than creating PC boards.
Finally came the global imperative to become more productive. The realization that CAD is an integral part of a high order process to streamline operations, coupled with the demands of high-technology competition and shortening product life cycles, created opportunities for users to demand and vendors to deliver.
The PCB segment comprises diverse solutions for integration, automation, and hardware. The market leaders in the late 1970s—Applicon, Calma, Computervision, Gerber Scientific, Racal-Redac, and Scientific Calculations—had holes in their product lines and strategies that other companies sought to fill. As new entrants began to introduce and deliver solutions, the old guard leaders began to revitalize their product lines. The results are the diverse solutions described in the next three sections.
INTEGRATION
The electronic product design process neither starts nor ends with printed circuit board design. The electronic portion of the product in which the board will be used must first be conceptualized, designed, and analyzed. Then the board itself must be laid out and verified. And finally, the mechanical design in which the board will be placed must be designed. This process is not a serial one, although many CAD systems of yore approached the design process serially with isolated and discrete products.
Electronic Integration
Dataquest believes that the integration of EDA functionalities into the PCB design process is imperative for the long-term success of the CAD vendors. Integration is achieved on various levels, ranging from interfaces to external products to highly integrated connectivity between logic diagrams and physical geometries within the same system.
It is only within the last two years that logic design and analysis have been truly integrated into PCB CAD systems. However, this integration has come from many young CAD vendors and only a few of the old guard leaders. Most of the old guard leaders that were not among the first with EDA have since added the functionality, but as a defensive response to either those companies that included EDA from the beginning or to those that added it later.
7.3-2 © 1986 Dataquest Incorporated July CCIS Markets
7.3 PCB Market Overview
We believe that the user is largely responsible for driving the incorporation of EDA functionality into PCB systems. CAD vendors that correctly interpreted and quickly responded to users' needs were not only first to market but also have a better chance of surviving the extreme competition and pressures at the PCB design and layout level.
EDA functionalities applicable to printed circuit board design include the following:
• Schematic capture
• Logic simulation
• Physical device modeling/simulation
• Microprocessor development/software engineering
• Timing verification
• Thermal analysis
• Load checking
• Testability analysis ^
• Tester interfaces or program development
We do not believe that EDA functionality must be developed or integrated internally by all PCB CAD vendors. However, EDA options must be clearly visible and easy. Options may include third-party deals or an open and accessible data base to which the user or other vendors can interface. Those that pursue no options will seriously jeopardize their businesses, especially in the short term—when Dataquest believes that the most attrition will occur.
Electromechanical
Electromechanical (EM) applications have long been part of printed circuit board design; so much so that it is not always clear if a vendor is selling mechanical or PCB applications. We believe that EM will continue to be important in PCB design but that its role will change dramatically.
Because the PCB is used in a mechanically designed product (card cage, cabinets, assemblies), integration with mechanical CAD will continue to be important.
CCIS Markets © 1986 Dataquest Incorporated July 7.3-3
7.3 PCB Market Overview
However, Dataquest believes that the user's highest priority is to design a board—logically and physically. With viable EDA and CAD alternatives and Options, we believe that the user will choose electronic design functionality first and EM functions second. This choice will affect companies with a strong focus on EM, as the buyer's primary emphasis will shift toward electronic design.
The data base will play a critical role in the product's acceptance. For example, we believe that the optimum EM product is one that is integrated into or with a data base with electrical data, not vice versa (electronic drafting integrated into a mechanical design product). Because the market's emphasis will shift toward electronic design, we believe that it is important for the data base to be electronic CAD-oriented.
The final point on EM concerns the mechanical CAD segment itself. As its applications scope and depth broadens, so must the mechanical portion of electromechanical. Several vendors currently have a 3-D data base designing and displaying a board and its components. For a company to compete with an EM product, we believe that it must maintain product development and integration equal to the separate developments of both mechanical and electronic CAD products.
AUTOMATION
The approaches to creating printed circuit board geometries—manual editing or automatic layout—vary greatly from system to system. The trend is toward automatic layout, but there are questions about the trend: What kind? To what degree? On what hardware?
We believe that automatic layout is one of the most significant trends occurring in the PCB segment. However, we are also concerned about the seemingly mysterious and fearsome aura surrounding automatic placement and routing and about the effect that this aura will have on the success of PCB CAD automation growth.
For instance, automatic place and route programs have been commercially available for five to seven years, yet they are just becoming accepted. We believe that early routers were difficult to use, vague in their operations, and little understood, thus creating their mystery. Routers also tended to be less effective in completions than the user was led to believe, and, because they were usually batch programs, they were not friendly.
The good news is that both hardware and software technologies have changed. Automatic routers allow more user intervention; their command structures and operating procedures are no longer just machine readable; and routing algorithms are better understood, at least conversationally. Routers themselves have removed some of the mystery and fear about their use.
7.3-4 © 1986 Dataquest Incorporated July CCIS Markets
7.3 PCB Market Overview
It's not all good news, however. In solving some of the major problems associated with routers, vendors have inadvertently created a new set of obstacles, as follows:
• "A little knowledge is dangerous." Despite only minimum understanding of routing algorithms, users are distracting vendors from selling benefits and are forcing features pitches.
• Lower system prices mean more potential buyers in this price-elastic market. More buyers mean that routers must become even easier to use and get even closer to 100 percent completion.
• Allowing rumored performance to overshadow conventional benchmarks will not only damage a company, but overselling to this degree will affect the entire PCB segment by rekindling fears and doubts in the end-user communities.
• The EDA connection allows a heated data base debate to surface—whether or not to open or control data base interfaces so that routing and back-annotation can both be done but perhaps on different vendors' product lines.
HARDWARE
Unlike the IC and EDA CAD segments, the PCB segment is plagued by different types of hardware. The IC segment, while predominately based on host-dependent architectures, is making a fairly smooth transition to standalone products. The EDA segment, while previously dominated by standalone products, is experiencing a computational alignment with the introduction of the personal computer. The PCB environment allows disparate hardware types to thrive in competition against each other.
Platforms
The availability of distributed processing has dramatically changed the PCB segment. Standalone and personal computers have expanded target markets and brought about new application implementations, better design integration, and lower prices. The chain of events causing the change has been a series of offensive actions and defensive reactions.
Initially, standalone PCB systems first competed against host-dependent systems on the basis of price, targeted at smaller companies that could not afford expensive shared-logic systems. Large companies, the sacred target markets of the host-dependent leaders, also realized the benefits of standalones and actively sought them out. This resulted in companies with host-dependent-based systems reacting defensively and scrambling to develop standalone-based products.
CCIS Marliets © 1986 Dataquest Incorporated July 7.3-5
7.3 PCB Market Overview
In the next aggressive move, standalones competed against hosts on the basis of functionality, user interface, and ease of use. This was not so easy to react to because, by this time, any flaws in the host-dependent software were already being ported to new standalone products, requiring major rewrites in order to compete effectively.
In yet another aggressive move, EDA functionality was integrated with standalone PCB systems. The defensive reaction was even more difficult; in some cases, it required a complete software rewrite in order to associate electrical connectivity with geometry data. Nonetheless, vendors defensively scrambled to at least address EDA applications.
Then came the personal computer CAD system, first introduced by an outside set of competitors. Dataquest believes that PCs were first introduced as a defensive action, hiding behind niche classification because they were targeted at smaller companies. However, the move soon turned out to be extremely aggressive because the larger companies once again realized the benefits of the new hardware, this time the personal computer.
We believe that the market will continue to evolve in this cyclical fashion, with the majority of the vendors reacting defensively to the innovations of the few.
Accelerators
Not only is the PCB segment contending with competing and overlapping hardware platforms, it is also ushering in yet another type of hardware—the application accelerator. Accelerators are used to speed specific applications. In the PCB segment, they are used most often as routing engines. We believe that the PCB accelerator phenomenon is occurring for several reasons, as follows:
• Routing algorithms are better understood, more flexible, and more stable.
• Hardware platforms with insufficient horsepower to complete a route within given time constraints require acceptable options.
• There is an underlying need for tools that increase productivity, in this case by decreasing the amount of time needed to complete a route.
• Distributed processing allows an accelerator to be accessed easily by many users, thus decreasing the cost per seat.
Current accelerators either are standalone engines without comprehensive design capabilities or are integrated into a design system. We do not believe that either technology, in and of itself, is better than the other. We do believe, however.
7.3-6 © 1986 Dataquest Incorporated July CCIS Markets
7.3 PCB Market Overview
that price is the determining factor as to which is ultimately the best implementation, assuming fairly equal routing capability. The considerations and trade-offs affecting the buyer's decision may include the following:
• Process speed
• Routing completion
• Shared resource, network accessibility
• Remote job access
• Design functions
• Limitations imposed by the router
• Manufacturability
As the printed circuit board design function is more closely integrated into the broader electronic design cycle, we believe that it is important for application accelerators to be shared by the design network. Furthermore, we believe that as more and more personal computers become part of the design network, the power of the accelerator will become a required and critical part of most design projects.
MARKET PRESSURES
Companies selling PCB products are quickly redefining and expanding their businesses. The new business statement is an example of electronic product design automation. The expansion includes EDA applications, lower-priced hardware, accelerators, automatic placement and routing software, interactive and fast graphics, and, to some degree, electromechanical design.
We believe that the redefinition is occurring in reaction to several factors:
• New PCB companies with lower system prices, reentrant automatic layout, and/or front-end design capabilities
— Users' demands for alternatives
• EDA companies bringing out their big guns by introducing PCB CAD products while yelling "blood bath"
— Users' demands for closely coupled and integrated electronic product design products
CCIS Markets © 1986 Dataquest Incorporated July 7.3-7
7.3 PCB Market Overview
• The perceived necessary evil of personal computers that have lower gross profit margins and lower overall revenue, but are the platforms that users are buying and that produce PCB designs
— Users' demands for low-cost hardware solutions
• The old guard leaders flexing their mechanical CAD and CAM muscles
— Users' needs for integration into the product design process
These factors do not assume that the reactions were strictly to competition; they do not preclude strategic reactions to the users' demands. However, they do illustrate not only the competitive pressures, but also the diverse approaches in printed circuit board design and the major opportunities in the market segment.
7.3-8 © 1986 Dataquest Incorporated July CCIS Markets
7.4.1 Total PCB CAD/CAM
This section covers the total printed circuit board (PCB) CAD/CAM market for all regions and product types (see Figure 7.4.1-1 Revenue, Figure 7.4.1-1 Shipments, and Table 7.4.1-1).
• The PCB segment was an estimated $477 million in 1985 and is forecast to grow to $1,038 million in 1990, at a compound annual growth rate (CAGR) of 17 percent.
• Dataquest estimates that revenue will grow 16 percent in 1986, reaching $552 million.
• Workstation shipments in 1985 were an estimated 5,668 units; shipments are expected to reach 23,663 units in 1990, growing at a 33 percent CAGR.
CCIS Markets © 1986 Dataquest Incorporated July 7.4.1-1
7.4.1 Total PCB CAD/CAM
Figure 7.4.1-1 Revenue
PCB CAD/CAM-Worldwide
ly/litlions of Dollars 1200-
1000-^
800-^
600
400
200
^ ^ ^ ^
xvvvi Cv^-^w-J
VV^O^i
$H li ^ ^
'?%^W
W^ . : \ : : i .
!C\\:\X;
m^ :i$ii
^ 1385 1SS6 1987 1988 1989 1990
Source: Dataquest June 1986
7.4.1-2 1986 Dataquest Incorporated July CCIS Markets
7.4.1 Total PCB CAD/CAM
Workstation Shipments
Figure 7.4.1-1 Shipments
PCB CAD/CAM-Worldwide
24000-
21000
18000~
15000-
12000
9DD0
6000
3000
f ^ ^ ^ S ^
sSSS^^
5 ^ litS
^ ^ ^ ^ '
m ^X-C'"
K^Sx
Vw^ .-oX'w
] , . V . •^./^•t. Hi..
t ^ ^
ik •ii'SS'
mi NX, :ss : ' ' : ^ ; ^ "x ' ' - "
iS^s^S^ V -V"-w<X'
•'-..X.
1985 1986 1987 1988 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 7.4.1-3
7 .4.1 Total PCB CAD/CAM
Table 7.4.1-1
PCB CAD/CAM-Worldwide Total Applications
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market
ReveIme Systems
Workstations
477 4,449
5,668
552 6,949
8,221
659 9,876
10,975
778 13,392 14,294
902 17,634
18,367
1,038 16.8% 23,150 39.1%
23,663 33.1%
Source: Dataquest
June 1986
7-4-1-4 © 1986 Dataquest Incorporated July CCIS Markets
7.4.2 PCB Market Shares
This section covers Dataquest's analysis of the PCB market share distribution (see Figure 7.4.2-1 and Table 7.4.2-1).
• Computervision continues to lead the PCB market, with nearly 11 percent of the 1985 market, although its market share dropped 9 points from its 1984 share.
• Dataquest believes that Computervision continues to dominate the PCB segment because the majority of PCB sales are integrated with CADDS4X, its mechanical design software.
• Racal-Redac became the second-largest PCB vendor, with a 10 percent share. Dataquest attributes Redac's growth to the relatively new Visuala product.
• Scientific Calculations' position slipped to third place in 1985, with a 9 percent market share.
• Hewlett-Packard achieved a 6 percent market share in its first year of shipping a PCB product. The company's product is primarily a drafting tool that can also be used for mechanical design.
• The PCB segment continues to have many vendors jockeying for market position, making it a highly fragmented market with total revenue of more than $15 million. Dataquest is listing, for the first time, market share for the following companies:
— Autodesk
— Cadnetix
— Calay
— Ferranti
— Tektronix
CCIS Markets © 1986 Dataquest Incorporated July 7.4.2-1
7.4.2 PCB Market Shares
Figure 7.4.2-1
PCB Market Share—Worldwide 1985
Source: Dataquest Junel986
7.4.2-2 1986 Dataquest Incorporated July CCIS Markets
7 .4.2 PCB Market Shares
Table 7.4.2-1
PCB Market Share—Worldwide (Millions of Dollars)
COMPANY
CoInputervision
RacaL-Redac Scientif ic Calculations
Hewlett-Packard
IBM
Intergraph
Calma
Cadnetix
Applicon
Calay
Telesis Gerber Scientific
Tektronix Autodesk
Ferranti
Other Coniputer Companies
Other Europe Companies
Other Far East Conpanies
Other Turnkey and Software
All Companies
1985
REVENUE
$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $
53 49
45
30 26
23
18
17 17
16
13
6
5 1
0
11
34
96
18
477
1985
SHARE
11.1% 10.2%
9.4%
6.3%
5.5% 4.7%
3.8%
3.7%
3.5%
3.3%
2.6%
1.3%
1.1%
.3%
.0%
2.3%
7.1%
20.1%
3.7%
100.0%
Source: Dataquest
June 1986
CCIS Markets 1986 Datequest Incorporated July 7.4.2-3
7.4.2 PCB Market Shares
(Page intentionally left blank)
T.4.2-4 © 1986 Etetaquest Incorporated July CCIS Markets
7.4.3 PCB Regions
MARKET BY REGION
This section includes Dataquest's forecasts for and analysis of the PCB market, segmented by region (see Figure 7.4.3-1 Revenue, Figure 7.4.3-1 Shipments, and Tables 7.4.3-1 and 7.4.3-2).
• Dataquest believes that North America will lead in consumption of PCB systems through 1990, with $219 million in 1985, growing to $476 million in 1990, at a CAGR of 17 percent.
• We are forecasting no change in the relative positions of Europe, the Far East, and the Rest of World segments for consumption of PCB systems.
• Europe consumed $116 million worth of PCB systems in 1985; this figure is forecast to grow to $254 million in 1990, at a CAGR of 17 percent.
• The Far East segment consumed $136 million worth of PCB systems in 1985; consumption is forecast to grow to $298 million in 1990, at a CAGR of 17 percent.
• The Rest of World countries consumed $5 million worth of PCB systems in 1985; consumption is forecast to grow at a CAGR of 17 percent, reaching $10 million in 1990.
CCIS Markets © 1986 Dataquest Incorporated July 7.4.3-1
7.4.3 PCB Regions
Figure 7.4.3-1 Revenue
PCB CAD/CAM by Region
Millions of Dollars
540
480
420-
360
300
240
180
120
1985 18W 1987 1988 1989 1990
Source: -Dataquest June 1986
7.4.3-2 1986 Dataquest Incorporated July CCIS Markets
7.4.3 PCB Regions
Figure 7.4.3-1 Shipments
PCB CAD/CAM by Region
Workstation Shipments
10000-
9000
6000
4000
2000-
O:K= 1985
X
North America
Europe
Far East
ROW
1986 1987 1988 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 7.4.3-3
7.4.3 PCB Regions
Table 7.4.3-1
PCB CAD/CAM Application by Region
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Marlcet
Revenue Systems
Uorl(stations
North Aflierica
Revenue Systems Workstations
Europe ReverKie
Systems
Workstations
Far East
Revenue Systems
Workstations
Rest of World Revenue
Systems
Workstations
477
4,449
5,668
219
2,293 2,618
116 1,146 1,271
136 977
1,733
5
33
47
552 6,949
8,221
254
3,295 3,846
135 1,819
2,149
158 1,777
2,154
5
58
72
659
9,876 10,975
303 4,596 5.075
161 2,420
2.765
189 2.780
3,037
6
81
97
778
13,392 14,294
357
6,158 6,543
190 3,167
3,502
223
3,942
4,113
8
125
136
902 17.634
18,367
414
8,102 8,381
220 4,165
4,461
259
5.186 5,339
9
181
185
1,038 23,150
23,663
476
10,586 10,795
254 5,532
5.743
298 6,793
6.884
10
239 241
Source;
16.8X 39. IX
33.IX
16.8X
35.8X 32.8X
16.9X 37. OX
35.2X
16.9X
47.4X
31.8X
16.8X
48.6X
39. OX
Dataquest
June 1986
7.4.3-4 1986 Dataquest Incorporated July CCIS Markets
7.4.3 PCB Regions
Table 7.4.3-2
PCB CAD/CAM Application by Region
(Percent of Total)
1985 1986 1987 1988 1989 1990
North America
Revenue Systems Workstations
Europe
Revenue Systems Workstations
Far East Revenue
Systems
Workstations
Rest of World
Revenue
Systems Workstations
46X
52% 46X
24% 26X 22%
29X 22X
31X
IX
IX
IX
46X 47X 47X
24X 26X 26X
29X
26X
26X
IX
IX IX
46X
47X 46X
24X 24X 25X
29%
28X 28X
IX
IX
IX
46X 46X 46X
24X 24X
2SX
29X
29X
29X
IX
IX IX
46X
46X 46X
24X 24X 24X
29X
29X 29X
IX
IX IX
46X
46X 46X
24X 24X
24X
29X
29X
29X
IX IX
IX
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 7.4.3-5
7.4.4 PCB Product Types
This section includes Dataquest's forecasts for and analysis of the PCB CAD/CAM market segment by product type (see Figure 7.4.4-1 Revenue, Figure 7.4.4-1 Shipments, and Tables 7.4.4-1 and 7.4.4-2).
• Host-dependent systems led in revenue in 1985, with $237 million, or 50 percent of all PCB revenue.
• Host-dependent revenue is expected to give way to standalone revenue in 1986 and to fall to only 6 percent of PCB revenue in 1990.
• Standalone revenue is forecast to grow from $193 million in 1985 to $941 million in 1990, representing a 37 percent CAGR.
• As a percent of revenue, standalones are expected to increase from 40 percent in 1985 to 91 percent in 1990.
• Dataquest believes that the primary reasons for the strength of standalone systems in the PCB segment are their lower cost per seat and their acceptable performance levels.
• We believe that with the relative strength of standalone systems will also come the inherent benefits of distributed architectures.
• Personal computer (PC) revenue is expected to decrease from $47 million in 1985 to $38 million in 1990, at a rate of 4 percent.
• PC shipments were 2,100 in 1985 and are forecast to increase to 2,195 in 1990, at a CAGR of 1.2 percent.
• Dataquest believes that PCs have become widely accepted, primarily because of their low cost per seat.
• Because of their comparatively low price/performance ratios, we believe that most PCs will be used in a networked environment for manual drafting applications, not for automatic place and route.
• Place-and-route programs are available for several vendors' PCs. Dataquest believes that there is a market for such a product, but that these PCs will not be used for large and complex printed circuit boards.
• Due to inherent computational issues of automatic place and route, we believe that end users with complex boards will opt for higher performance, trading off lower price per seat.
• Plug-in coprocessors and accelerators will play a large role in the widespread acceptance of the PC and an automatic layout product.
CCIS Markets © 1986 Dataquest Incorporated July 7.4.4-1
7.4.4 PCB Product Types
• With the availability of truly low-cost standalone systems, we believe that standalone systems will be chosen over PCs because of both their network and graphics capabilities and their relatively higher performance.
• PCB shipments will be dominated by standalone architectures through 1990.
• We believe that the majority of large, more costly host-dependent systems will be sold by CAD vendors with multifunctionality, such as mechanical or Other electronic applications.
7.4.4-2 © 1986 Datequest Incorporated July CCIS Markets
7.4.4 PCB Product Types
Figure 7.4.4-1 Revenue
PCB CAD/CAM by Product Type—Worldwide
Millions of Dollars
900-
800-
700-
600-
500-
400-
300-
2 0 0 ,
100-
0
• • A
Standalone
Host-Dependent
Personal Computer
— i • —A
1
— ^
y^ _ /
^
i
* iv
1
1965 1986 1987 1988 1989 1990
Source: Dataquest June 1986
CCIS Markets 1986 Dataquest Incorporated July 7.4.4-3
7.4.4 PCB Product Types
Figure 7.4.4-1 Shipments
PCB CAD/CAM by Product Type—Worldwide
Workstation Shipments
21000
18000
15000
12000
9000-
6000
3000
• Standalone
• Host-Dependent
A Personal Corriputer
1985 1986 1987 1988 1989 1990
Source: Dataqueit June 1986
7.4.4-4 1986 Dataquest Incorporated July CCIS Markets
7.4.4 PCB Product Types
Table 7.4.4-1
PCB CAD/CAM-Worldwide Application by Product Type
(Millions of Dollars/Actual Units)
1985 1986 1987 1988 1989 1990 CAGR
Total Market Revenue Systems Workstations
Standalone Revenue Systems Workstations
Host-Dependent Revenue
Systems
Workstations
Personal Computer
Revenue Systems
Worksttitions
477 4.449 5,668
193 1,823 1,823
237
526 1,746
47
2,100 2,100
552 6,949
8,221
289
3,762 3,762
213 565
1,837
50
2.622 2,622
659 9.876 10.975
444 6.610 6,610
161
450
1.548
53 2,816
2,816
778 13,392 14.294
611 10.415 10.415
118
338 1.241
50
2.639
2.639
902 17,634 18,367
772 15,075 15,075
87
249
981
43
2.311
2.311
1.038 23.150 23,663
941 20,929
20,929
59 155
668
38 2,066
2,066
16.8X 39.1% 33.1%
37.3% 62.9%
62.9%
-24.4%
-21.7%
-17.5%
-4.0%
-.3%
-.3%
SOURCE: Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 7.4.4-5
7.4.4 PCB Product Types
Table 7.4.4-2
PCB CAD/CAM-Worldwide Application by Product Type
(Percent of Total)
1985 1986 1987 1988 1989 1990
Standalone
Revenue
Systems Workstations
Host-Dependent
Revenue Systeffs Uorlcstations
Personal Computer Revenue
Systems Workstations
40X 41X 32%
SOX 12X 31X
10X 47X 37X
52X 54X 46X
39X 8X 22X
9X 38X 32X
67X 67X 60X
24X 5X 14X
8X 29X 26X
78X 78X 73X
15X 3X 9X
6X 20X 18X
86X 85X 82X
10X IX 5X
5X 13X 13X
91X 90X 88X
6X IX 3X
4X 9X 9X
SOURCE: Dataquest
June 1986
7.4.4-6 © 1986 Dataquest Incorporated July CCIS Markets
7.4.5 PCB Average Price Per Seat
This section includes Dataquest's forecasts for and analysis of the average price per seat by product type for the PCB segment (see Figure 7.4.5-1 and Table 7.4.5-1).
• The overall average price per seat for PCB CAD applications was $64,400 in 1985 and is forecast to decrease at a 13 percent CAGR, reaching $31,600 in 1990.
• The amount of software and its value ultimately determines the end-user price.
• The value of software will hold the price of a turnkey seat higher than if measuring only the value of the CPU and workstation.
• The Standalone average price per seat is forecast to decrease the most, from $84,100 in 1985 to $32,600 in 1990, at a compound rate of 17 percent.
• Dataquest believes that as the average price per standalone seat decreases, its performance will increase, resulting in systems of equivalent performance at a lower price.
• Host-dependent seats, while decreasing at a compound rate of 14 percent, from $124,400 in 1985 to $58,000 in 1990, will not favorably compete on a price basis with standalone systems.
• Personal computers are forecast to decrease the least, at a rate of 7 percent compounded annually, because we believe that PCs will proportionately absorb more software and peripherals than standalone and host-dependent workstations.
CCIS Markets © 1986 Dataquest Incorporated July 7.4.5-1
7.4.5 PCB Average Price Per Seat
Thousands of Dollars
Figure 7.4.5-1
PCB Turnkey—Worldwide Average Price per Seat
120-
itjo-
80-
?qv
m-
20-
n-
' A i—
• • •
m
1
Standalone
Host-Dependent
Personal Corriputer
* - ^ L
1
198S 1986 1987 1988 1989 1990
Source: Daiaquest June 1986
7.4.5-2 1986 Dataquest Incorporated July CCIS Markets
7.4.5 PCB Average Price Per Seat
Table 7.4.5-1
PCB Turnkey—Worldwide Average Price per Seat (Thousands of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
All Product Types
Standalone Host-Dependent
Personal Coniputer
64.4 84.1
124.4
18.4
56.8
61.0
97.9
17.1
49.2
53.1 85.9
16.0
43.0 45.7 75.4
14.9
37.3
38.8
66.1 13.7
31.6 -13%
32.6 -17%
58.0 -14% 12.5 -8%
Source: Dataquest June 1986
CCIS Markets © 1986 Dataquest Incorporated July 7.4.5-3
7.4.5 FOB Average Price Per Seat
(Page intentionally left blank)
7.4.5-4 © 1986 Dataquest Incorporated July CCIS Markets
7.4.6 PCB Revenue Source
This section includes Dataquest's forecasts for and analysis of the PCB market, segmented by source of revenue for each product type (see Figure 7.4.6-1 and Tables 7.4.6-1 and 7.4.6-2).
• The hardware portion of PCB systems in 1985 was $273 million, or 57 percent of PCB revenue.
• Dataquest forecasts that the value of hardware will decrease to 44 percent of revenue, or $457 million in 1990.
• The percentage value of hardware is decreasing because both software and service will increase as a percent of the system's value.
• A primary reason for hardware remaining at the percentage level forecast is that the value of peripherals compared to the value of a CPU and terminal is expected to increase.
• Peripherals such as application accelerations, physical modelers, and graphics accelerators are expected to contribute heavily to the hardware portion of the business.
• Dataquest believes that the relative and absolute software content of a system will increase over time, resulting in more software purchases and in end-user price decreases not maintaining pace with decreasing hardware prices.
• The software portion of the PCB segment was 30 percent in 1985, or approximately $141 million.
• As the installed base increases, especially due to the proliferation of Standalone workstations and personal computers, the value of service is forecast to grow from 13 percent revenue in 1985 to 21 percent in 1990.
• We believe that service is a core and critical part of all CAD vendors' business; we also believe that it must become a revenue-contributing profit and loss center.
CCIS Markets © 1986 Dataquest Incorporated July 7.4.6-1
7.4.6 PCB Revenue Source
Figure 7.4.6-1
PCB CAD/CAM-Worldwide Applications by Revenue Source
Millions of Dollars 500-
450
400-
350-
300-.
250
200
150
100
• Hardware
• Software
A Service
1985 1986 1987 1988 1989 1990
Sources Datsque&t June 1986
7.4.6-2 1986 Dataquest Incorporated July CCIS Markets
7 .4.6 PCB Revenue Source
Table 7.4.6-1
PCB CAD/CAM-Worldwide Applications by Revenue Source
(Millions of Dollars)
1985 1986 1987 1988 1989 1990 CAGR
A l l Product Types
Hardware
Software Service
Total
Standalone Hardware Software Service
Total
Host-Dependent
Hardware
Software
Service
Total
Personal Coinputer Hardware Software Service
Total
273 141 63 477
98 67 28 193
157 46 34 237
18 28 1 47
314 163 74 552
156 91 42 289
140 41 31 213
18 31 1 50
357 209 94 659
235 143 67 444
103 32 26 161
19 34 1 53
400 258 120 778
311 201 98 611
72 24 21 118
16 33 1 50
434 309 159 902
372 261 139 772
49 19 19 87
13 30 1 43
457 366 215
1,038
418 326 197 941
29 13 17 59
10 28 1
38
Source:
11% 21% 28% 17%
34% 37% 48% 37%
-28%
-23%
-13% -24%
-11%
-0% -4% -4%
Dataquest
June 1986
CCIS Markets 1986 Dataquest Incorporated July 7.4.6-3
7.4.6 PCB Revenue Source
Table 7.4.6-2
PCB CAD/CAM-Worldwide Applications by Revenue Source
(Percent of Total)
1985 1986 1987 1988 1989 1990
A l l Product Types
Hardware Software Service
Total
Standalone
Hardware
Software
Service
Total
Host-Dependent
Hardware
Software
Service
Total
Personal Computer
Hardware
Software
Service
Total
57X 30X 13X
100X
51X 3SX 15X
100X
66X 19X 14X 100X
39X 60X 2X
100X
57X 30X 13X
100X
54X 32X 15X
100X
66X 19X 15X 100X
37X 61X 2X
100X
54X 32X 14X 100X
53X 32X 15X
100X
64X 20X 16X 100X
35X 63X 2X
100X
51X 33X 15X
100X
51X 33X 16X
100X
61X 21X 18X 100X
33X 66X 2X
100X
48X 34X 18X 100X
48X 34X 18X 100X
57X 21X 22X 100X
30X 69X 2X
100X
44X 35X 21X 100X
44X 35X 21X 100X
SOX 21X 29X 100X
26X 72X 2X
100X
Source: Dataquest
June 1986
7.4.6-4 1986 Dataquest Incorporated July CCIS Markets
top related