cart & stacking stand specifications · n i5 and i3 oven: place oven on top shelf. oven is...

CART & STACKING STANDSPECIFICATIONS

CA

RT & STA

CKING

STAN

D SPECIFIC

ATION

S

www.turbochef.comDOC-1157 / Revision F /April 2018 / Page 1 of 2

TurboChef Global Operations 2801 Trade Center DriveCarrollton, Texas 75007 USA

US: 800.90TURBO (800.908.8726)International: +1 214.379.6000

Fax: +1 214.379.6073

TM

18”457mm

24”610mm

44.6”1133mm

32”813mm

26.6”676mm

27.8”706mm

27.5”699mm

32”813mm

27”686mm

24.1”612mm

24.1”612mm

20.9”531mm

20.9”531mm

21.3”541mm28.6

726mm32.5”

826mm

18”457mm

24”610mm

44.6”1133mm

32”813mm

26.6”676mm

27.8”706mm

27.5”699mm

32”813mm

27”686mm

24.1”612mm

24.1”612mm

20.9”531mm

20.9”531mm

21.3”541mm28.6

726mm32.5”

826mm

18”457mm

24”610mm

44.6”1133mm

32”813mm

26.6”676mm

27.8”706mm

27.5”699mm

32”813mm

27”686mm

24.1”612mm

24.1”612mm

20.9”531mm

20.9”531mm

21.3”541mm28.6

726mm32.5”

826mm

PART NUMBERSn 18” Oven Cart: NGC-1217-2n 24” Oven Cart: NGC-1217-1n 32” Oven Cart: NGC-1217-3n Stacking Stand (i3 and i5, for use with 18” cart only): i5-9369

CONSTRUCTIONn Stainless steel top shelf and framen Integrated locking casters (oven carts only)

COMPATIBILITYn C3 Oven: Remove legs and attach to inner mounting holes with provided hardwaren NGC Oven: Remove legs and attach to outer mounting holes with provided hardwaren HhB Oven: Attach to outer mounting holes with HhB oven cart clamp set (see “Stacking Hardware,” below)n i5 and i3 Oven: Place oven on top shelf. Oven is sealed to the top shelf via integrated rubber-base gasketn Sota Oven: Stacking and installation on oven cart is not supportedn Encore Oven: Remove legs and attach to mounting holes with provided hardware

CAUTION: Seals, attachments, and locking the casters will not prevent injury or oven damage if the oven is forcefully pulled or not properly attached.

STACKING HARDWARE

CAUTION: Ovens cannot be safely stacked on top of a 32” cart.

n C3 and NGC Stacking Bracket (P/N:TC3-0323)n NGC Sorbothane® Stacking Mat (P/N: NGC-1342-1)n HhB Stacking Bracket (P/N: HHB-8165)n HhB Oven Cart Clamp Set (P/N: HHB-8206)n Encore Stacking Bracket (P/N: ENC-1201)

NOTE: See DOC-1032 for comprehensive stacking information.

18” Oven Cart-Front

32” Oven Cart-Front

Oven Stacking Stand-Front

18”457mm

24”610mm

44.6”1133mm

32”813mm

26.6”676mm

27.8”706mm

27.5”699mm

32”813mm

27”686mm

24.1”612mm

24.1”612mm

20.9”531mm

20.9”531mm

21.3”541mm28.6

726mm32.5”

826mm

18”457mm

24”610mm

44.6”1133mm

32”813mm

26.6”676mm

27.8”706mm

27.5”699mm

32”813mm

27”686mm

24.1”612mm

24.1”612mm

20.9”531mm

20.9”531mm

21.3”541mm28.6

726mm32.5”

826mm

18”457mm

24”610mm

44.6”1133mm

32”813mm

26.6”676mm

27.8”706mm

27.5”699mm

32”813mm

27”686mm

24.1”612mm

24.1”612mm

20.9”531mm

20.9”531mm

21.3”541mm28.6

726mm32.5”

826mm

24” Oven Cart-Front

All Oven Carts-Top Shelf

Oven Stacking Stand-Side

OVEN DIMENSIONS WITH CARTS

Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3B: i5

T: i3B: i3

T: i5B: i5

T: i5B: i3

T: NGCB: NGC

T: C3B: C3

T: NGCB: C3

T: HhBB: HhB

T: HhBB: C3

T: NGCB: HhB

T: EncoreB: Encore

T: EncoreB: NGC

Inchesmm

18457

37940

39.51003

38.5978

42.31074

39.25997

37940

Inchesmm

18457

65.851673

65.851673

68.91750

68.91750

561422

611549

58.51486

591499

601524

57.51461

561422

561422

Inchesmm

24610

431092

45.51156

44.51130

48.31227

45.251149

431092

Inchesmm

24610 - - - - 62

157567

170264.51638

651651

661676

63.51613

621575

621575

Inchesmm

32813

511295

53.51359

52.51334

56.31430

53.251353

511295

Inchesmm

32813 - - - - - - - - - - - -

Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3B: i5

T: i3B: i3

T: i5B: i5

T: i5B: i3

T: NGCB: NGC

T: C3B: C3

T: NGCB: C3

T: HhBB: HhB

T: HhBB: C3

T: NGCB: HhB

T: EncoreB: Encore

T: EncoreB: NGC

Inchesmm

27.8706

27.8706

29737

27.8706

28.1714

27.8706

27.8706

Inchesmm

27.8706

32.5826

32.5826

32.5826

32.5826

27.8706

29 737

29 737

27.8706

29 737

27.8706

27.8706

27.8706

Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3B: i5

T: i3B: i3

T: i5B: i5

T: i5B: i3

T: NGCB: NGC

T: C3B: C3

T: NGCB: C3

T: HhBB: HhB

T: HhBB: C3

T: NGCB: HhB

T: EncoreB: Encore

T: EncoreB: NGC

Inchesmm

26.6676

28.2716

32.25819

31.5800

31.1790

31.25794

32.7831

Inchesmm

26.6676

31.25794

31.25794

31.1790

31.25 794

28.2716

32.25819

32.25819

31.5800

32.25819

31.5800

32.7831

32.7831

Height - Stacked Ovens

Width - Stacked Ovens

Depth - Stacked Ovens

Height - Single Ovens

Width - Single Ovens

Depth - Single Ovens

18”457mm

24”610mm

44.6”1133mm

32”813mm

26.6”676mm

27.8”706mm

27.5”699mm

32”813mm

27”686mm

24.1”612mm

24.1”612mm

20.9”531mm

20.9”531mm

21.3”541mm28.6

726mm32.5”

826mm

v

HhC CONVEYOR OVEN CARTS

PART NUMBERSn 35.8” Oven Cart: HCT-3004-1n 23.5” Oven Cart: HCT-3004-2

CONSTRUCTIONn Stainless steel framen Integrated locking casters

COMPATIBILITYCart Oven Quantity

35.8” Oven Cart: HCT-3004-1

HhC 1618, HhC 2020, HhC 2620† 1 or 2 ovens*

23.5” Oven Cart: HCT-3004-2

HhC 1618, HhC 2020, HhC 2620† 2 or 3 ovens*

* One stacking kit is required to stack two ovens and two stacking kits are required to stack three ovens; see “Stacking Hardware,” below.† When stacking, HhC 2620 ovens must always be placed below HhC 2020 and/or HhC 1618 ovens. HhC 2020 ovens must always be placed below HhC 1618 ovens.

CAUTION: Attachments and locking the casters will not prevent injury or oven damage if the oven is forcefully pulled or not properly attached.

CAUTION: Ovens cannot be safely stacked using 35.8” cart.

STACKING HARDWARE

n Stacking Kit, HhC 2020 to HhC 2020, HhC 2620 to HhC 2620, or HhC 2020 to HhC 2620 (flush back): HCT-3001

n Stacking Kit, HhC 2020 to HhC 2620 (flush front): HCW-4173

n Stacking Kit, HhC 1618 bottom to HhC 1618 middle/top: HCS-3001

n Stacking Kit, HhC 1618 middle to HhC 1618 top: HCS-3016

n Stacking Kit, HhC 1618 to HhC 2020, HhC 1618 to HhC 2620: HCS-3001

HhC CO

NV

EYOR O

VEN

CA

RTSTM

www.turbochef.comDOC-1157 / Revision F /April 2018 / Page 2 of 2

TurboChef Global Operations 2801 Trade Center DriveCarrollton, Texas 75007 USA

US: 800.90TURBO (800.908.8726)International: +1 214.379.6000

Fax: +1 214.379.6073

TurboChef reserves the right to make substitutions of components or change specifications without prior notice. © 2009-2018 TurboChef Technologies, Inc.

HCW-3004-1 Front HCW-3004-1/2 Top

HCW-3004-2 Front

HCT-3004-1 Front HCT-3004-1/2 Top

HCT-3004-2 Front

35.8”909mm

HCW-3004-1 Front HCW-3004-1/2 Top

HCW-3004-2 Front

HCT-3004-1 Front HCT-3004-1/2 Top

HCT-3004-2 Front

23.5”597mm

HCW-3004-1 Front HCW-3004-1/2 Top

HCW-3004-2 Front

HCT-3004-1 Front HCT-3004-1/2 Top

HCT-3004-2 Front

24.1”612mm

20.9”531mm

35.8” Oven Cart-Front

35.8” & 23.5”Oven Cart-Top

23.5” Oven Cart-Front

OVEN DIMENSIONS WITH CARTS

Cart Dimensions

Width (HhC 1618

with extensions)

Width (HhC 2020

or HhC 2620 with

extensions)

Width (HhC 1618

without extensions)

Width (HhC 2020

or HhC 2620 without

extensions)

Depth(HhC 1618)

Depth(HhC 2020)

Depth(HhC 2620) Height

Single Oven

HeightDouble Stacked

HeightTriple

Stacked

Height: 35.8” (909mm)Width: 20.9” (531mm)Depth: 24.1” (612mm)

48.1” (1222mm)

60.1” (1527mm)

36.1” (917mm)

48.3” (1227mm)

31.7” (805mm)

35.7” (907mm)

41.7” (1059mm)

48.8” (1240mm)

61.8”(1570mm) -

Height: 23.5” (597mm)Width: 20.9” (531mm)Depth: 24.1” (612mm)

48.1” (1222mm)

60.1” (1527mm)

36.1” (917mm)

48.3” (1227mm)

31.7” (805mm)

35.7” (907mm)

41.7” (1059mm)

36.5” (927mm)

49.5” (1257 mm)

62.5” (1588mm)