catalog :: gate, globe & check · pdf file · 2012-05-1530-053-01 30-054-01...

IntroductionApollo Valves is proud to introduce our new line of multi-turn cast bronze gate, globe and check valves. Suitable for a wide range of applications including HVAC systems, potable water, irrigation and OEM, these valves are an ideal complement to our existing family of commercial products including ball valves, butter!y valves, back!ow preventers and pressure reducing valves.

Proudly Made in the USA, our new line of bronze multi turn valves are cast, machined, assembled and 100% tested in our foundry and assembly plants in Pageland, South Carolina.

Apollo Valves – committed to quality, innovation and service since 1928.

MULTI-TURN takes a new turn

Table of ContentsGate Valves ............................................................................. 4-6Globe Valves .......................................................................... 7-8Check Valves ....................................................................... 9-11Comparison Chart .......................................................... 12-15De!nitions ......................................................................... 16-17A History of Quality, Service & Innovation .................. 18Warranty Information ......................................................... 18 Terms & Conditions .............................................................. 19

Customer Service (704) 841-60004

www.apollovalves.com

GATE VALVES

Part Number30-083-0130-084-0130-085-0130-086-0130-087-0130-088-0130-089-0130-080-01

Part Number30-001-0130-002-0130-003-0130-004-0130-005-0130-006-0130-007-0130-008-0130-009-0130-000-01

LEAD FREEPart Number30LF-083-0130LF-084-0130LF-085-0130LF-086-0130LF-087-0130LF-088-0130LF-089-0130LF-080-01

LEAD FREEPart Number30LF-001-0130LF-002-0130LF-003-0130LF-004-0130LF-005-0130LF-006-0130LF-007-0130LF-008-0130LF-009-0130LF-000-01

NPS1/23/4

11 1/41 1/2

22 1/2

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

Length2.032.072.452.632.883.064.134.48

Length1.761.762.032.072.452.632.883.064.134.48

Height4.855.716.718.109.08

11.2814.5819.07

Height4.574.514.855.716.718.109.08

11.2814.5819.07

Weight1.001.302.203.204.407.00

13.8017.70

Weight0.800.771.001.302.163.204.367.01

13.7917.70

Features:Threaded BonnetSolid DiscRising StemSolder Ends

Body, Bonnet & Wedge:ASTM B62 BronzeLF = ASTM B584-C89836

Stem: ASTM B371 Sil-Brz

Packing: Graphoil

Hand Wheel: Malleable Iron

Features:Threaded BonnetSolid DiscRising StemNPT

Packing: Graphoil

200 CWP GATE VALVE

Class 125 (200 CWP, 125 SWP) GATE VALVE

101S/101S-LF SERIES

101T/101T-LF SERIES

Part Number30-043-0130-044-0130-045-0130-046-0130-047-0130-048-0130-049-0130-040-01

NPS1/23/4

11 1/41 1/2

22 1/2

Height3.564.054.555.146.027.099.11

Length1.882.432.963.143.444.114.795.43

Weight0.851.191.982.803.955.88

12.1916.84

Features:Threaded BonnetSolid DiscNon-Rising StemSolder Ends

Packing: Graphoil

200 CWP GATE VALVE102S/102S-LF SERIES

All dimensions are in inches and pounds.

5Customer Service (704) 841-6000for additional information, submittal sheets and manuals, visit www.apollovalves.com

GATE VALVES

Part Number30-031-0130-032-0130-033-0130-034-0130-035-0130-036-0130-037-0130-038-0130-039-0130-030-01

LEAD FREEPart Number30LF-031-0130LF-032-0130LF-033-0130LF-034-0130LF-035-0130LF-036-0130LF-037-0130LF-038-0130LF-039-0130LF-030-01

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

Length1.761.762.032.072.452.632.883.064.134.48

Height3.293.293.564.054.555.146.027.099.11

Weight0.740.710.851.191.982.803.955.88

12.1916.84

Features:Threaded BonnetSolid DiscNon-Rising StemNPT

Packing: Graphoil

Class 125 (200 CWP, 125 SWP) GATE VALVE102T/102T-LF SERIES

Part Number30-033-01K30-034-01K30-035-01K30-036-01K30-037-01K30-038-01K30-039-01K30-030-01K

NPS1/23/4

11 1/41 1/2

22 1/2

Length2.032.072.452.632.883.064.134.48

Height3.564.054.555.146.027.099.11

Weight0.851.191.982.803.955.88

12.1916.84

Features:Threaded BonnetSolid DiscRising StemNPTCross-Handle (irrigation)

Body, Bonnet & Wedge:ASTM B62 Bronze

Packing: Graphoil

Cross-Handle: Bronze

Class 125 (200 CWP,125 SWP) GATE VALVE102T-K SERIES

Part Number30-051-0130-052-0130-053-0130-054-0130-055-0130-056-0130-057-0130-058-0130-059-0130-050-01

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

Length1.761.762.032.072.452.632.883.064.964.48

Height4.574.514.855.716.718.109.08

11.2814.5819.07

Weight0.900.861.071.432.443.714.897.53

15.3319.56

Features:Union BonnetSolid DiscRising StemNPT

Packing: Graphoil

Class 125 (200 CWP,125 SWP) GATE VALVE103T SERIES

GATE VALVES

Part Number30-201-0130-202-0130-203-0130-204-0130-205-0130-206-0130-207-0130-208-0130-209-0130-200-01

Part Number30-443-0130-444-0130-445-0130-446-0130-447-0130-448-01

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

NPS1/23/4

11 1/41 1/2

Length1.761.762.032.072.452.632.883.064.134.48

Length2.312.562.893.013.053.08

Height4.574.514.855.716.718.109.13

11.2814.5816.90

Height4.976.226.948.299.28

Weight0.900.861.071.432.503.695.017.53

15.3319.56

Weight1.402.303.505.106.809.60

Features:Union BonnetSolid DiscRising Stem

Packing: Graphoil

Features:Union BonnetSolid DiscRising StemNPT

Packing: Graphoil

107T SERIES

111T SERIES

Part Number30-281-0130-282-0130-283-0130-284-0130-285-0130-286-0130-287-0130-288-0130-289-0130-280-01

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

Length1.761.762.032.072.452.632.883.064.134.48

Height3.293.293.564.054.555.146.027.099.11

Weight0.740.710.981.211.982.804.065.88

12.1916.90

Features:Threaded BonnetSolid DiscNon-Rising StemNPT

Packing: Graphoil

Class 150 (300 CWP, 150 SWP) GATE VALVE106T SERIESAll dimensions are in inches and pounds.

Part Number33-143-0133-144-0133-145-0133-146-0133-147-0133-148-01

NPS1/23/4

11 1/41 1/2

Length2.973.834.575.955.957.18

Height3.474.755.407.807.808.43

Weight1.001.902.807.306.80

Features:Threaded BonnetPTFE DiscSolder Ends

Disc: PTFE

Packing: Graphoil

200 CWP GLOBE VALVE120S SERIES

Part Number33-132-0133-133-0133-134-0133-135-0133-136-0133-137-0133-138-01

NPS3/81/23/4

11 1/41 1/2

Length2.392.703.203.754.744.745.72

Height3.373.474.755.407.787.788.43

Weight1.001.101.903.007.307.00

Features:Threaded BonnetPTFE DiscSolder EndsNPT

Disc: PTFE

Packing: Graphoil

Class 125 (200 CWP, 125 SWP) GLOBE VALVE120T SERIES

GLOBE VALVES

Part Number33-161-0133-162-0133-163-0133-164-0133-165-0133-166-0133-167-0133-168-01

NPS1/43/81/23/4

11 1/41 1/2

Length2.392.392.703.203.754.744.745.72

Height3.463.463.564.755.407.787.788.43

Weight1.001.001.101.903.007.307.00

Features:Threaded BonnetBronze DiscNPT

Disc: ASTM B505

Packing: Graphoil

Class 125 (200 CWP, 125 SWP) GLOBE VALVE121T/121T-LF SERIES

GLOBE VALVES

Part Number33-663-0133-664-0133-665-0133-666-0133-667-0133-668-01

NPS1/23/4

11 1/41 1/2

Length2.703.204.005.255.256.25

Height5.405.866.718.508.509.75

Weight1.782.284.228.308.10

Features:Union BonnetBronze Disc and SeatNPT

Disc: ASTM B61 Bronze

Packing: Graphoil

Class 300 (1000 CWP, 300 SWP) GLOBE VALVE127T SERIES

Part Number33-221-0133-222-0133-223-0133-224-0133-225-0133-226-0133-227-0133-228-0133-229-0133-220-01

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

Length2.392.392.703.203.754.744.745.206.607.74

Height4.234.234.314.895.407.797.798.76

10.0711.39

Weight1.401.401.402.203.507.707.40

12.4018.8025.50

Features:Union BonnetPTFE DiscNPT

Disc: PTFE

Packing: Graphoil

Class 150 (300 CWP, 150 SWP) GLOBE VALVE122T SERIESAll dimensions are in inches and pounds.

SWING CHECK VALVES

Part Number61Y-093-0161Y-094-0161Y-095-0161Y-096-0161Y-097-0161Y-098-0161Y-099-0161Y-090-01

LEAD FREEPart Number61YLF-093-0161YLF-094-0161YLF-095-0161YLF-096-0161YLF-097-01 61YLF-098-01 not available not available

NPS1/23/4

11 1/41 1/2

22 1/2

Length2.533.364.074.685.286.508.309.58

Height1.651.902.262.652.993.745.116.05

Weight0.620.911.702.002.704.909.70

Features:Y-PatternBronze DiscSolder Ends

Body & Cap:ASTM B62 BronzeLF = ASTM B584-C89836

Hanger & Pin: SS for 1/2”, 3/4” & 1”, or B62 on 1 1/4” to 3”LF - Stainless

Seat: ASTM B62 BronzeLF -ASTM B584-C89836

Plug: Brass

200 CWP SWING CHECK161S/161S-LF SERIESAll dimensions are in inches and pounds.

Part Number61Y-191-0161Y-192-0161Y-193-0161Y-194-0161Y-195-0161Y-196-0161Y-197-0161Y-198-0161Y-199-01 61Y-190-01

LEAD FREEPart Number61YLF-191-0161YLF-192-0161YLF-193-0161YLF-194-0161YLF-195-0161YLF-196-0161YLF-197-0161YLF-198-01not available not available

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

Length2.142.142.482.943.574.504.505.258.009.24

Height1.511.511.651.902.262.992.993.745.116.05

Weight0.640.620.731.061.703.303.105.50

11.7017.80

Features:Y-PatternBronze DiscNPT

Hanger & Pin: Stainless

Seat: ASTM B62 BronzeLF -ASTM B584-C89836

Plug: Brass

Class 125 (200 CWP, 125 SWP) SWING CHECK161T/161T-LF SERIESAll dimensions are in inches and pounds.

Part Number61Y-201-V161Y-202-V1 61Y-203-V1 61Y-204-V1 61Y-205-V161Y-206-V161Y-207-V161Y-208-V1

NPS1/43/81/23/4

11 1/41 1/2

Length2.142.142.482.943.574.504.505.25

Height1.511.511.651.902.262.992.993.74

Weight0.640.620.731.061.703.303.105.40

Features:Y-PatternViton® DiscNPT

Body & Cap:ASTM B62 Bronze

Seat: Viton®

Plug: Brass

Class 125 (200 CWP, 125 SWP) SWING CHECK162T SERIESAll dimensions are in inches and pounds.

SWING CHECK VALVES

Part Number61Y-201-T161Y-202-T161Y-203-T161Y-204-T161Y-205-T161Y-206-T161Y-207-T161Y-208-T1

LEAD FREEPart Number61YLF-201-T161YLF-202-T161YLF-203-T161YLF-204-T161YLF-205-T161YLF-206-T161YLF-207-T161YLF-208-T1

NPS1/43/81/23/4

11 1/41 1/2

Length2.142.152.482.943.574.504.505.25

Height1.511.511.651.902.262.992.993.74

Weight0.640.620.731.061.703.303.105.40

Features:Y-PatternPTFE DiscNPT

Seat: PTFE

Plug: Brass

Class 125 (200 CWP, 125 SWP) SWING CHECK163T/163T-LF SERIES

Part Number61Y-211-0161Y-212-01 61Y-213-01 61Y-214-01 61Y-215-0161Y-216-0161Y-217-0161Y-218-0161Y-219-0161Y-210-01

NPS1/43/81/23/4

11 1/41 1/2

22 1/2

Length2.142.142.482.943.574.504.505.258.009.24

Height1.511.511.651.902.262.992.993.745.116.05

Weight0.640.620.731.061.703.303.105.50

11.7017.80

Seat: ASTM B62 BRONZE

Plug: Brass

Class 150 (300 CWP, 150 SWP) SWING CHECK164T SERIES

Part Number61Y-753-0161Y-754-0161Y-755-0161Y-756-0161Y-757-0161Y-758-01

NPS1/23/4

11 1/41 1/2

Length2.502.953.574.504.505.25

Height1.651.902.273.003.003.75

Weight.75

1.201.803.503.205.60

Seat: ASTM B61 BRONZE

Plug: Brass

Class 300 (600 CWP, 300 SWP) SWING CHECK168T SERIESAll dimensions are in inches and pounds.

Class 300 (600 CWP) SWING CHECK

SWING CHECK VALVES

Part Number61Y-753-T161Y-754-T161Y-755-T161Y-756-T161Y-757-T161Y-758-T1

NPS1/23/4

11 1/41 1/2

Length2.5

2.953.574.504.505.25

Height1.651.902.273.003.003.75

Weight.75

1.201.803.503.205.60

Features:Y-PatternPTFE DiscNPT

Seat: PTFE

Plug: Brass

169T SERIESAll dimensions are in inches and pounds.

BRONZE CROSS REFERENCE CHART Apollo Model Apollo P/N Size Range Description

Design Standard Crane Model Hammond Model Kitz Model Milwaukee Model Nibco Model Stockham Model Walworth Model

Apollo Model Apollo P/N Size Range Description

101S30-08X-011/2” to 3”

MSS SP-80 1334IB635444149

S111B108K55SJ

101T30-00X-011/4” to 3”

MSS SP-80 428

IB64024

148T111

B100K55

161S61Y-09X-011/2” to 3”

MSS SP-80 1340IB912

1509S413B

B309YK3406SJ

102S30-04X-011/2” to 3”

MSS SP-80 1320IB647

S113B104K

161T61Y-19X-01

1/4” to 3”

MSS SP-80 37

IB90422

509T413B

B319YK3406

162T61Y-20X-VI1/4” to 2”

MSS SP-80

T413VB320BYK

200 CWPGate ValveBronzeThreaded Bonnet Solid DiscRising StemSolder Ends

Class 125 (200 CWP, 125 SWP)Gate ValveBronzeThreaded Bonnet Solid DiscRising StemNPT

200 CWPSwing CheckBronzeY-PatternBronze DiscSolder Ends

200 CWP Gate ValveBronzeThreaded Bonnet Solid DiscNRSSolder Ends

Class 125 (200 CWP, 125 SWP)Swing CheckBronzeY-Pattern Bronze DiscNPT

Class 125 (200 CWP, 125 SWP)Swing CheckBronzeY-Pattern Viton® DiscNPT

101S-LF30LF-08X-01

1/2” to 3”

MSS SP-139

101T-LF30LF-00X-01

1/4” to 3”

MSS SP-139

161S-LF61YLF-09X-01

1/2” to 2”

MSS SP-139

UP1509

161T-LF61YLF-19X-01

1/4” to 2”

MSS SP-139

200 CWP Gate ValveLF-BronzeThreaded Bonnet Solid DiscRising Stem Solder Ends

Class 125 (200 CWP, 125 SWP)Gate ValveLF-BronzeThreaded Bonnet Solid DiscRising StemNPT

200 CWP Swing CheckLF-BronzeY-PatternBronze DiscSolder Ends

Class 125 (200 CWP)Swing CheckLF-BronzeY-PatternBronze DiscNPT

BRONZE CROSS REFERENCE CHART102T-K

30-03X-01K1/4” to 3”

MSS SP-80

T113-K

163T-LF61YLF-20X-T1

1/2” to 2”

MSS SP-139

T413Y-LF

168T61Y-75X-011/2” to 2”

MSS SP-80 76E

IB94919

507T473BB375K3428

106T30-28X-011/4” to 3”

MSS SP-80 437

IB64646

1140T133

B128K14

102T30-03X-011/4” to 3”

MSS SP-80 438

IB64540

105T113

B103K4

Class 125 (200 CWP, 125 SWP)Gate ValveBronzeThreaded Bonnet Solid DiscNRSNPT

Class 125 (200 CWP)Swing CheckLF-BronzeY-PatternPTFE DiscNPT

Class 300 (600 CWP, 300 SWP)Swing CheckBronzeY-PatternBronze DiscNPT

103T30-05X-011/4” to 3”

MSS SP-80 428UBIB617

1152T124

B105K2

164T61Y-21X-01

1/4” to 3”

MSS SP-80 137

T433bB321K

169T61Y-75X-T1

1/2” to 2”

MSS SP-80

102S-LF30LF-04X-01

1/2” to 3”

MSS SP-139

UP115S113-LF

107T30-20X-011/4” to 3”

MSS SP-80 431UBIB629

421151T134

B120K11

102T-LF30LF-03X-01

1/4” to 3”

MSS SP-139

UP105T113-LF

163T61Y-20Y-T1

1/4” to 2”

MSS SP-80 41TFIB940

22T509T

T413YB320TYK

Class 125 (200 CWP, 125 SWP)Gate ValveBronzeUnion Bonnet Solid DiscRising StemNPT

Class 150 (300 CWP, 150 SWP)Swing CheckBronzeY-Pattern Bronze DiscNPT

Class 300 (600 CWP, 300 SWP)Swing CheckBronzeY-Pattern PTFE DiscNPT

200 CWPGate ValveLF-BronzeThreaded Bonnet Solid DiscNRSSolder Ends

Class 125 (200 CWP, 125 SWP)Gate ValveLF-Bronze Threaded Bonnet Solid DiscNRSNPT

Class 125 (200 CWP, 125 SWP)Swing CheckBronzeY-Pattern PTFE DiscNPT

111T30-44X-011/2” to 2”

MSS SP-80 662EIB652

371182

T174AB144K3048

BRONZE GATE VALVES

BRONZE CHECK VALVES

BRONZE AND IRON CROSS REFERENCE CHART

120S33-14X-011/2” to 2”

MSS SP-80

S211YB14TK3095SJ

121T33-16X-011/4” to 2”

MSS SP-80 1

IB44011

502T211bB16K3058

122T33-22X-011/4” to 3”

MSS SP-80 7TF

IB413T9

590TT235YB22TK3095

200 CWPGlobe ValveBronzeThreaded Bonnet PTFE DiscSolder Ends

Class 125 (200 CWP, 125 SWP)Globe ValveBronzeThreaded Bonnet Bronze DiscNPT

Class 150 (300 CWP, 150 SWP)Globe ValveBronzeUnion Bonnet PTFE DiscNPT

120T33-13X-013/8” to 2”

MSS SP-80 5TF

T211YB13TK

121T-LF33LF-16X-01

1/4” to 2”

MSS SP-139

127T33-66X-011/2” to 2”

MSS SP-80

IB41217

572T275BB66K3205

711F6GB-11X-B1

2” to 10”

MSS SP-85 351

2981MF718BG512

721F6GB-21X-B1

2” to 8”

MSS SP-85 21E

2983MF768BF532

Class 125 (200 CWP, 125 SWP)Globe ValveBronzeThreaded Bonnet PTFE DiscNPT

Class 125 (200 CWP)Globe ValveLF-BronzeThreaded Bonnet Bronze DiscNPT

Class 300 (1000 CWP,300 SWP) Globe ValveBronzeUnion BonnetBronze DiscNPT

Class 125 FlangedGlobe ValveCast IronOS&YIBBM

Class 250 FlangedGlobe ValveCast IronOS&YIBBM

BRONZE GLOBE VALVESIRON GLOBE VALVES

IRON CROSS REFERENCE CHART

910F6SC-10X-B1

2” to 24”

MSS SP-71 373

IR1124

2974MF918BG931

610F6GA-10X-B1

2” to 24”

MSS SP-70 461

IR1138

2882MF619G612

920F6SC-20X-B1

2” to 8”

MSS SP-71 39E

2970MF968BF947

W8970F

Class 125FlangedSwing CheckCast IronIBBM

Class 125 FlangedGate ValveCast IronNRSIBBM

Class 250FlangedSwing CheckCast IronIBBM

910FLW6SC-10X-B1L

2” to 12”

MSS SP-71 383

C2974MLWF918BLWG931W

620F6GA-20X-B1

2” to 12”

MSS SP-70

F669F661

910WB6WC-10X-N1

2” to 24”

IR9253

1400W910BWG970

621F6GA-21X-B1

2” to 12”

MSS SP-70 7 1/2EIR330

2894MF667-0

F667W786F

611F6GA-11X-B1

2” to 24”

MSS SP-70 465 1/2IR1140

2885MF617-0G623

910WE6WC-10X-E1

2” to 12”

Class 125FlangedSwing CheckCast IronIBBM w/ lever& weight

Class 250FlangedGate ValveCast IronNRSIBBM

Class 125Wafer CheckBunaCast IronIBBM

Class 250 FlangedGate ValveCast IronOS&YIBBM

Class 125 FlangedGate ValveCast IronOS&YIBBM

Class 125Wafer CheckEPDMICast IronIBBM

IRON GATE VALVES

IRON CHECK VALVES

DEFINITIONSVALVE TYPES:Apollo o"ers cast bronze alloy Gate, Globe and Swing Check valves in a variety of con!gurations and sizes:

Gate Valves: Apollo Gate valves are all fully guided solid wedge style available in Type 1A, “Non-Rising Stem and External Stu#ng Box” and Type 2, “Rising Stem, Inside Screw, External Stu#ng Box” designs.

Globe Valves: Apollo Globe valves are available in Type 1, “Metallic Disc, Integral Seat” and Type 2, “Non-Metallic Disc, Integral Seat”, and Type 3, “Metallic Disc, Replaceable/Renewable Seat” designs.

Check Valves: Apollo Swing Check valves are available in Type 3, “Metal to Metal Seated”, and Type 4, “Non-Metallic Disc, Metal Seat” designs.

PRESSURE RATINGS:

SWP: “Steam Working Pressure” is de!ned as the maximum allowable working pressure for saturated steam service.CWP: The acronym for “Cold Working Pressure” and is the allowable working pressure for the device in the temperature range of -20°F to 150°F (-29°C to 66°C)Class 125: The CWP for Apollo’s Class 125 valves is 200 psig.Class 150: The CWP for Apollo’s Class 150 valves is 300 psigClass 300: The CWP for Apollo’s Class 300 valves is 1000 psig (600 psig for swing checks) 200 CWP: Commonly applied to solder-end valves and equates to 200 psig.125 SWP: The SWP for Apollo’s Class 125 metal to metal seated valves is 125 psig.*150 SWP: The SWP for Apollo’s Class 150 metal to metal seated valves is 150 psig.*300 SWP: The SWP for Apollo’s Class 300 metal to metal seated valves is 300 psig.** The maximum saturated steam working pressure (SWP) for soft seated valves is determined by the limits of the non-metallic materials.

TEMPERATURE RATINGS:Maximum temperature ratings for valves with non-metallic seating (such as is o"ered in some globe and check valves) are dependant upon the composition of the sealing element. It is the responsibility of the user to specify the service conditions and verify that the valves selected are suitable for their intended use.

END CONNECTION:

Threaded Ends: Valves supplied with threaded ends comply with ASME B1.20.1.Solder Ends: Valves supplied with solder joint ends comply with ASME B16.18.

STEM TYPES:Rising Stem: Rising stem, inside screw is the most common stem design used in bronze gate and globe valves. In the fully open, back seated position the stem threads are isolated from the media. The rising stem also give a clearly visible indication as to whether the valve is open or closed. Because the stem and handle rise above the valve during operation, adequate clearance must be provided.Non-Rising Stem: Applicable only to gate valves. Valves with non-rising stems have a lower pro!le but the stem threads are exposed to the media leaving them subject to damage from errosion, corrosions or deposits. There is no visual open-closed indication.

BONNET OPTIONS:Threaded Bonnet: This is the most cost e"ective method for assembling the bonnet of Gate and Globe valves.Union Bonnet: Union bonnets are intended to simplify inspection of the interior of the valve.

DEFINITIONSMATERIALS OF CONSTRUCTION:For Standard Valves: All materials of construction comply with the requirements of MSS SP-80. Class 125, Class 150 and 200 CWP bodies and bonnets or covers are produced from ASTM B62 cast bronze containing a nominal 85% copper. Class 300 bodies and bonnets or covers are produced from ASTM B61 cast bronze containing a nominal 88% copper. Stems are produced from ASTM B371 silicon bronze.“Lead-Free” Valves: Bodies and bonnets or covers are produced from ASTM B584-C89836 cast bronze containing a nominal 89% copper and no more than 0.1% lead. Stems are produced from ASTM B371 silicon bronze.

STEM PACKING:All Apollo Bronze Gate and Globe valves are factory equipped with Die-Formed Graphite stem packing which ensures an e"ective seal under a wide range of service conditions.

MARKING:All Apollo Bronze Gate, Globe and Check valves are marked in compliance with MSS SP-80, MSS SP-139 and MSS SP-25. Swing check valves include a cast $ow direction arrow. Lead Free valves feature a cast “LF” symbol where space permits.

TESTING:All Apollo Bronze Gate, Globe and Check valves are tested in compliance with MSS SP-80 and MSS SP-139.

STANDARDS COMPLIANCE:ASME B1.20.1, “Pipe Threads, General Purpose (Inch)”ASME B16.18, “Cast Copper Solder Joint Pressure Fittings”ASTM B61, “Standard Speci!cation for Steam or Valve Bronze Castings”ASTM B62, “Composition Bronze or Ounce Metal Castings”ASTM B371, “Standard Speci!cation for Copper-Zinc-Silicon Alloy Rod”ASTM B584, “Standard Speci!cation for Copper Alloy Sand Castings for General Applications”*MSS SP-25, “Standard Marking System for Valves, Fittings and Flanges”MSS SP-80, “Bronze Gate, Globe, Angle and Check Valves”MSS SP-139, “Copper Alloy Globe, Angle, and Check Valves for Low Pressure/Low Temperature Plumbing Applications”** Lead-Free versions of Apollo’s Gate, Globe and Check valves

CAUTIONS:Bubble tight shut-o" should not be expected on metal seated check valves. MSS SP-80 de!nes acceptable leakage rates as 40 ml of water per hour per inch of Nominal Pipe Size (NPS) for valves 1” and larger or 0.4 Standard Cubic Foot (SCF) air per hour per inch of NPS. For valves smaller than 1” the allowable leak rate is 40 ml of water per hour or 0.4 SCF of air per hour.Bubble tight shut-o" should not be expected on metal to metal seated Gate or Globe valves. MSS SP-80 de!nes acceptable leakage rates as 10 ml of water per hour per inch of Nominal Pipe Size (NPS) for valves 1” and larger or 0.1 SCF of air per hour per inch of NPS. For valves smaller than 1” the allowable leak rate is 10 ml of water per hour or 0.1 SCF of air per hour.Gate valves are not recommended for throttling service and should only be used in the fully open or fully closed positions to minimize vibration and chatter which may damage the seat or wedge. For throttling applications refer to Apollo’s Globe valve o"ering.Safe working pressures and temperatures for solder end valve depends not only on the valve and tubing strength, but also on the composition of the solder used to produce the joints. It is the responsibility of the user to choose a solder that is compatible with the service conditions.Properly sized swing check valves frequently are smaller than the pipe in which they are used. This practice keeps velocities up so the valve operates near full open, minimizing noise and vibration while maximizing valve life.

WARRANTY AND LIMITATIONS OF LIABILITYConbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of FIVE years from the date of delivery to you, our initial purchaser. This warranty applies to Apollo brand product with”Made in the USA” markings only.Should any failure to conform to this warranty appear within FIVE years after the date of the initial delivery to our initial purchaser, Conbraco will, upon written noti"cation thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco’s recommendations and standard industry practice, correct such defects by suitable repair or replacement at Conbraco’s own expense.APOLLO INTERNATIONAL PRODUCTS: Conbraco Industries, Inc. warrants its International products, to its initial purchaser only, that its international products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of TWO years from the date of delivery to you, our initial purchaser. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute ful"llment of all liabilities of Conbraco to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether expressed or implied shall pass through our initial purchaser to any other person or corporation.LIMITATION OF LIABILITY: Conbraco Industries, inc. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, DAMAGES OR TO LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET FORTH HEREIN, ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE GOODS UPON WHICH SUCH LIABILITY IS BASED.* It is the end user’s responsibility to con"rm that items intended for use satisfy local codes and standards.

Conbraco® and Apollo® are registered trademarks of Conbraco Industries Inc. Conbraco Industries Inc. reserves the right to change speci!cations without notice.

A history ofQuality, Service and Innovation

Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of !ow control products for U.S. and international markets. The company’s headquarters is based in Matthews, North Carolina with manufacturing plants and foundries located in Pageland and Conway, South Carolina.

Conbraco has a history of new product development and innovation that dates back to the company’s inception in 1928. Today, the Conbraco line of products is marketed under the “Apollo Valves” brand and includes: ball valves, butter!y valves, back!ow prevention devices, water pressure reducing valves, mixing valves, safety relief valves, water gauges, strainers, vacuum breakers, valve actuators and more.

Conbraco’s vertically integrated manufacturing ensures a consistency of production, testing, quality and availability. It’s your assurance that Conbraco !ow control products will deliver long term performance advantages. All Conbraco plants are registered to ISO 9001 quality standards.

The Conbraco line continues to expand - with new products, designs and advanced materials - to better serve the needs of our customers in the chemical processing, pulp and paper, petroleum, residential and commercial plumbing and heating markets, as well as manufacturing and other markets.

Bronze Foundry | Pageland, SC

TERMS, CONDITIONS & WARRANTY INFORMATION

19Customer Service (704) 841-6000

TERMS & CONDITIONS OF SALE

Payment: 2% 10th prox. Net 30 days.All prices F.O.B. shipping point with freight allowed on shipments of 750 pounds and/or $5,000 net minimum to all shipping points within the United States excluding Alaska and Hawaii. No freight allowed on Air Freight or Parcel Post shipments. Claims for shortages must be made within 10 days of receipt of material. Our responsibility ends when a delivery receipt is furnished us by the carrier.No invoice rendered For Less than $50.00.No freight will be allowed on Air Freight, Air Express, Parcel Post or U.P.S. shipments.All Conbraco products may be combined to make su#cient weight for full freight allowance.Phone order quoted prices are subject to correction. Prices and designs are subject to change without notice.Orders for material of special design or speci"cation are made to customer’s order and are not subject to cancellation or return.All goods returned to us will not be accepted unless a full explanation has been made and our written authorized permission obtained in advance. All goods returned - if accepted - will be credited at invoice price, less 30% for service and rehandling charges, plus shipping expenses.We reserve the right to adjust orders to box quantities.

for additional information, submittal sheets and manuals, visit www.apollovalves.com

Conbraco International Sales: Jose Arias Mexico jose.arias@conbraco.com 956-631-4542 956-631-4681Luis Guzman Caribbean luis.guzman@conbraco.com 787-739-5620 JR Je$erson Central & South America jr.je$erson@conbraco.com 832-220-3783 Mike Link United Kingdom michael.link@pegleryorkshire.co.uk 44-0-1302-560-560 44-0-1302-367-661Luke Liu China luke.liu@conbraco.com 411-869-02498 411-869-02498 Jonathan Yap Asia Paci"c/India jonathan.yap@conbraco.com 65-9626-9241 65-6753-0131 Europe/Africa/Australia/Israel Contact Customer Service 704-841-6000 704-841-6021 Pegler Yorkshire Mid East Middle East (except Israel) pydubai@mailme.ae 971-4-454-2353 971-4-454-2352

AREAS COVERED EMAIL PHONE FAXINTERNATIONAL SALES REPS & REGIONAL MANAGERS

APOLLO VALVES REGIONAL SALES DIRECTORS P.O. BOX 247, Matthews, NC 28106Brian Blalock East brian.blalock@conbraco.com 704-614-3744 704-841-6021Skip Wilson West skip.wilson@conbraco.com 760-330-3293 775-854-5722APOLLO VALVES REGIONAL MANAGERSKevin Ashworth Mid Atlantic kevin.ashworth@conbraco.com 757-272-6200Steve Brown Northwest steve.brown@conbraco.com 425-985-5095 253-862-3548Andy Fretz Canada - Commercial andy.fretz@conbraco.com 647-281-3161 905-761-6666Ben Lauletta Northeast ben.lauletta@conbraco.com 518-795-4629 Sanford Pauly North Central sanford.pauly@conbraco.com 513-716-7772 513-321-7717Hector Rivera Florida hector.rivera@conbraco.com 786-210-7010James Saldivar South Central - Industrial james.saldivar@conbraco.com 832-776-5547Nick Shelley South Central - Commercial nick.shelley@conbraco.com 214-790-4157Jim Todman Canada - Industrial jim.todman@conbraco.com 905-407-8385 905-761-6666

David Beyer Northeast dbeyer@lasco"ttings.com 561-718-9379Ron Modugno West rmodugno@lasco"ttings.com 661-910-5058 661-775-0713Jimmy White Central jwhite@lasco"ttings.com 731-234-2372 731-779-3608Ben Freeman Southeast bfreeman@lasco"ttings.com 205-919-4944Rick Williamson Eastern Speci"cations Manager rwilliamson@lasco"ttings.com 386-451-2307

LASCO FITTINGS IRRIGATION REGIONAL MANAGERS P.O. BOX 116, Brownsville, TN 38012

d in t

Phone: (704) 841-6000Fax: (704) 841-6020

SALES & CUSTOMER SERVICE:CA

Mid South Marketing, Inc. VA/MD/Washington, D.C./WV-East michael.uecker@msmsales1.com 804-213-3801 804-213-3802Pro Marketing, Inc. NC/SC/TN-East sales@promarketinginc.net 864-578-4334 864-578-4889Spirit Group FL (except Panhandle) info@spiritgroupinc.com 407-291-6035 407-299-0378Tim Morales & Associates, Inc. AL/FL Panhandle sales@timmorales.com 251-602-8333 251-602-8339White Wolf Group GA info@whitewolfgroupinc.com 800-401-4870 888-908-9372

BWC Inc. LA (Commercial Products) chuck@bwcassoc.com 504-734-0229 504-734-3711Marathon Flow Control TX, OK, KS except Northeast, LA (Industrial) sales@marathon!owcontrol.com 214-201-0100 214-201-0104Southern Marketing Group MS/TN-West/AR/Bowie Cty.-TX SMG49@bellsouth.net 901-547-0042 901-547-0035

FourMation Sales MN/ND/SD/WI-West ryan@fourmationsales.com 763-420-6900 763-420-6993Marshall-Rodeno Heartland NE/IA (Except River Counties) trodeno@marshallrodeno.com 303-575-6701 303-575-6706Midwest Spec KY/OH/PA-West/WV-West glsales@mwspec.com 330-538-0406 330-538-0410New Tech Marketing Northern-IL/WI-East/IN/MI-UP/IA-River Counties sales@new-techmarketing.com 630-378-4300 630-378-0343New Tech Marketing MO/Southern IL/Northeast Kansas ntm112@aol.com 618-394-0329 618-394-0427V.E. Sales Co., Inc. MI (Except Upper Peninsula) tomv@vesalesinc.com 586-774-7760 586-774-1490

Elmco Duddy CA - South tduddy@elmcoduddy.com 626-333-9942 626-855-4811Gordon & Associates WA, OR, AK, Northern counties ID laura@gordonandassoc.com 360-566-1470 360-566-1478HC Fletcher CA - North (AB 1953 compliant product) apollosales@hc!etcher.com 800-432-7047 949-660-9072Marshall-Rodeno Associated CO/WY/MT/ID-SE/UT/NV-NE/NM/El Paso-TX trodeno@marshallrodeno.com 303-575-6701 303-575-6706Romatec CA - North PVF (non AB 1953) apollo@romatec.com 877-530-3530 661-588-3534Southwest Valves CA (Waterworks and Fire Protection) d.burell@southwestvalve.com 559-261-2703 559-261-2711Southwestern Industrial Sales Co. AZ/Nevada-SW eduardop@sw-ind.com 480-458-5838 480-458-5843Spec Management Group HI msmarch4@cox.net 949-481-4225 949-487-0990

Conroy & Griese Sales, Inc. NY-East/NJ-North iezzi52@aol.com 856-663-4440 856-663-6644Keith Engle & Associates OEM accounts keith.engle@verizon.net 610-827-9560 610-827-9561Layden Company NY-Upstate/PA-East/DE/NJ-South joejr@laydencompany.com 610-363-6657 877-529-3361Urell, Inc. MA/New England States conbraco@urell.com 617-923-9500 617-926-9414

Active Sales Northwest, Inc. OR, WA, Western ID skactive@aol.com 541-726-0320 541-726-1148 Biz Sales Company OH, KY, MI, IN, parts of PA, WV, WI dzavelson@bizpvf.com 216-595-2888 216-595-2899Fourmation Sales MN/ND/SD/WI-West dean@fourmationsales.com 763-262-4700 763-262-4740Hall Marketing AL, LA hallmarketing@bellsouth.net 228-547-4637 228-832-6666J&J Midwest Sales NE, IA, MO, KS john@jandjmidwestsales.com 314-422-8419 Jim Benton & Associates AL, FL Panhandle jim@bentonandassoc.com 205-664-1221 205-664-1277John Hart FL jhart@lasco"ttings.com 772-595-7773 772-489-4305Larry Perkins TX - Southern lperkins@lasco"ttings.com 936-443-1096 Marel Enterprises New England, NY, DE, MD, VA, DC, parts of PA & WV marelenterprise@gmail.com 631-271-1718 631-427-8558Marshall-Rodeno Associated CO/WY/MT/ID-SE/UT/NV-NE trodeno@marshallrodeno.com 303-575-6701 303-575-6706NSC Marketing Group Inc. OK nsc_tulsa@sbcglobal.net 918-627-5340 918-664-1408Pro Marketing, Inc. NC/SC/TN-East sales@promarketinginc.net 864-578-4334 864-578-4889Sherman Dobbs TX - Northern sdobbs@lasco"ttings.com 469-442-8510 972-417-9733Southern Marketing Group MS/TN-West/AR/Bowie Cty.-TX SMG49@bellsouth.net 901-547-0042 901-547-0035Spec Management Group CA-South msmarch4@cox.net 949-481-4225 949-487-0990VPC Sales AZ chudson@vpcsales.com 661-257-3923 661-257-3928

Ventes Techniques Nimatec Quebec nimatec@nimatec.com 450-691-9427 450-691-4949Barclay Sales Ltd. British Columbia bbarclay@barclaysales.com 604-945-1010 604-945-3030Conbraco Industries, Canada 178 Pennsylvania Ave., Unit 1, Concord, Ontario L4K 4B1 conbraco.canada@conbraco.com 905-761-6161 905-761-6666D & M Mechanical Sales Ontario/East don@dandmsales.ca 613-384-7084 613-384-3407Dynamic Agencies, Ltd. Saskatchewan doug.dynamicage@sasktel.net 306-343-1901 306-343-1901J. Levandier Sales, Inc. Nova Scotia, New Brunswick, Prince Edward Island & Newfoundland service@jlevandiersales 506-858-1615 506-858-1084 Kern Industries, Ltd. Alberta-North kernind@telusplanet.net 780-451-2056 780-454-6687Kern Industries Calgary, Ltd. Alberta-South marty.yucytus@kernindustries.ca 403-730-7791 403-239-8179Key to the North Sales Agency, Inc. Ontario-North hmehes@keytothenorth.ca 705-524-6714 705-566-0148Task Controls, Inc. Ontario infotoronto@taskcontrols.com 416-291-3004 416-754-3481Tom Beggs Agencies Ltd. Manitoba/NW Ontario tba@mts.net 204-953-1900 204-774-6915

AGENCY AREAS COVERED EMAIL PHONE FAX

current rep list as of 2/15/12

catalog :: gate, globe & check · pdf file · 2012-05-1530-053-01 30-054-01...

Documents

· created date: 1/30/2017 9:01:28 am

1 of 201 30/08/2018 6:01 pm

case 17-30140 doc 1 filed 01/30/17 entered 01/30/17 07:47...

06 / 2020(mm/yyyy) - cse … · 06 - 2020 05 - 2020 06 -...

€¦ · created date: 10/30/2014 1:01:46 pm

01 01 0 01 05:30 23:00 05:30 23:00 ego - sejong ·...

case 3:01-cv-00332-gcm document 1 filed 06/14/01 page 1 of...

01-30-2006 11;08;49am · title:...

01/28/2020 - commerce tourism (1:30 pm - 3:30...

2015-01-30 (1) - mcgill university

1409567-01-30-01 1409491-01-30-01 - tejidos roca alaska/cads...

· 2004-01-30 · created date: 1/30/2004 6:11:50 pm

created date 1/15/2016 12:30:01 pm

new doc 2018-01-30 (1) - padasalai 11th studymaterials ·...

-30...

01(.)2('/30$3%.)$1(%41) &,013.')*',(.3.4)&'$

1-30-1974 spectator 1974-01-30

1-30-1982 3:30 pm 1982-01-30 - core

· created date: 1/5/2018 12:01:30 pm

01 layout 1 30/05/2016 16:37 page 1