catalog laser marking - interpack€¦ · laser source ytterbium fiber laser, pulsed, air-cooled cw...
Post on 23-Jul-2020
3 Views
Preview:
TRANSCRIPT
Diode-Pumped Ytterbium Fiber Lasers
Laser Marking
Made in Germany
Edition 5.1
2
The basics
For current data refer to websitewww.cab.de/en/marking-laser.
All information on scopes of delivery, design and technical specifications correspond to the date of printing. Subject to change.
Using marking lasers is economic, when it comes to precisely and durably mark smallest components up to larger parts. The benefits of laser marking are manifold. The most significant are:
• Focusing in smallest spaces, as laser beams allow enormous energies to be bundled.
• Flexibility, as both metal and plastic parts can be marked. Even in places that are difficult to access.
• High marking speed, as strongly focused light does not have to overcome mechanical resistance.
• No mechanical force on components, as heat energy is used without direct contact.
• High durability, as laser marking is insensitive to acids or alkalis, UV radiation, heat and abrasion.
Marking lasers of the FL+ series are designed for a wide range of applications. The process allows stationary as well as on-the-fly marking on metal or plastic parts in various industries:
• Medtech: For example machine-readable codes on medical or surgical instruments. According to the guidelines for “Unique Device Identification“.
• Aerospace: Datamatrix codes on all strategic component parts, such as turbine components.
• Electronics: For quality assurance with permanent codes and alpha-numeric characters on PCBs, terminals, switches and others.
• Automotive: Laser marked codes for traceability of automotive components and assemblies. Allows marking contents including production data, date as well as serial, part and lot numbers, and others.
3
Marking laser FL+ – Applications
cab FL+ marking lasers are primarily used for the processing of metal and plastic parts. Different methods are commonly used depending on the requirement and material.
EngravingAblation of the material through evaporation with very high energy density that produces a deep marking with contour sharpness. An additional color change depending on the alloy or chemical composition improves the readability of the marking contents.
Surface removalThe laser marker removes top coating to show a different-colored material underneath. Examples: top coatings or anodizing layers, laser label material or day and night design on control buttons.
AnnealingIs mainly used with high-alloy, stainless steels and with titanium. Laser annealing creates a color change when the material is selectively exposed to heat and oxygen without noticeable material ablation.
Color changeIs used for the processing of plastic material. The color change depends on the chemical composition of the material and additives. Destroying color pigments and creating gas bubbles within the material produces light marks. Carbonization produces dark marks.
FoamingThe laser beam melts the workpiece surface locally. Small gas bubbles increase the volume of the molten material producing a raised marking. Small gas bubbles within the material diffusely reflect the light.
QR codes for traceability
Automotive components
Plastic ident clips Cable tags
Cast parts
Aluminum nameplates
Consumption meters Size allocation in medical technology
Medtech Traceability in sterilization processes
4
Marking laser FL+
Different plano-spherical lenses allow the lasers to mark in a field of 69x69 up to 290x290 mm. The lasers are used to mark on plastic, metal and color-coated surfaces.
The marking lasers FL+ consist of two fiber coupled functional modules: The scan head and the control unit with integrated laser source. The scan head may be assembled in each installation position.
Control unit with integrated laser source is available in two different designs.
Precise, fast, economic
Performance and quality of a marking mainly relies on the output power and the laser beam‘s focusing.
cab marking lasers FL+ are diode-pumped, air-cooled and offer highest beam quality and pulse peak power.
An output power of the laser source of 10 up to 50 Watt is available.
Type 2 “Rack” for FL+10/20/30/50 Watt Preferably used for the integration into 19“ cabinets. Control unit and laser source are incorporated in a 19“ rack mount.
Type 1 “Tower” for FL+20/30 WattVery compact design, used both as desktop version and for the integration into housings.
2.1, 2.2, 2.3, 2.4
1.2, 1.3
5
Marking laser FL+
InterfacesFor controlling and monitoring the process flow.
Ethernet 10/100 Base for PC. The device is supplied with a fixed IP address or configured in the DHCP mode.
Ethernet 10/100 Base for peripherals. For data communication from and to end devices.
2 x RS232 C for peripherals. For data communication from and to end devices.
Digital I/O for control and monitoring. Including eight freely programmable inputs and outputs. Protective circuit according to IEC 61131-2.
Remote for switching on and monitoring the laser.
Interlock/E-Stop for the integration into external safety circuits and the connection to an external E-Stop according to performance level d.
1
2
4
5
6
7
3 +
Technical data Tower 1.2 1.3Rack 2.1 2.2 2.3 2.4
Marking laser FL+10 FL+20 FL+30 FL+50Laser source Ytterbium fiber laser, pulsed, air-cooled cw output power max. W 10 20 30 50 Pulse energy mJ 0.5 1 1 1 Wave length nm 1064 Beam quality M2 <1.8 Pulse width ns 90-120 80-120 Pulse frequency kHz 20-80 2-200 2-200 2-200 Fiber coupling m 4.5 2.5 2.5 2.5Scan head Mounting Horizontal/vertical Marking speed mm/s ~5000Pilot laser
Wave length nm 650 cw output power mW <1Electronics Processor 32 bit clock rate MHz 600 Main memory (RAM) MB 256 Data memory (Flash) MB 512 Extensions (Flash) USB memory stickDimensions and weights Tower Rack 4RU 19“Control unit HxWxD mm 312x150x410 178x420x420 weight kg 15 16Scan head HxWxD mm 110x170x330 weight kg 7
Control panelKey switch Laser source ON/OFF
Push button pilot laser ON/OFF shutter open OPEN/CLOSEIndicator emission Laser source active laser error Laser source error ready Laser source ready power Power supply ON pilot laser ON shutter open Safety lock openConnector service USB mini data memory USBOperating data FL+10 FL+20 FL+30 FL+50Operating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFPower consumption standby W 65 max.W 150 175 200 250Temp./humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingApprovals CE, FCC class A, ICE S3Performance level dLaser safety class EN60825-1 laser source Class 4 pilot laser Class 2
2
1
3
5
6
7
4+
Recommended system requirements PC
Computer IBM PC/AT compatible
Operating system Microsoft Windows 7 Professional SP1 (32/64 bit)
Processor Intel Core i3-540 or higher
Main storage Minimum 1 GB RAM, 2 GB or more recommended
Hard disc Memory requirements software 1 GB,recommended size of hard disc 40 GB or more
Drives CD-ROM/DVD drive for software installation
Interfaces Network card 10/100 Mbit for laser connection, PS2/USB interfaces for mouse/keyboard, USB 2.0 connection for dongle Options: USB 2.0 connection for storage medium, RS232 interface for cab axis systems or cab laser label marker LM+
Software cabLase Editor 5Monitor SVGA, recommended resolution 1280x1024
Remote
User I/O
6
Marking laser FL+ – Accessories
Plano-spherical lenses F-ThetaFor bundling the laser beam to focus energy on one spot. Lenses with marking fields in different sizes are available. The smaller the marking field the higher the resolution.
Mounting plateIs used to tightly screw the tower housing on a base plate or a frame design.
Laser protection windowsIs used to be built in housings or doors for monitoring the marking process. The window can be tighten bolt directly to the housing panel.
Assembly frames for laser protection windowAs an alternative, the laser protection window can be mounted with a black anodized front cover and rear side frame.
3.1 3.3 3.6 3.9Plano-spherical lens 100.1 160.1 254.1 420.1Working distance mm 141±2 202±4 302±4 541±10Marking field mm 69x69 112x112 180x180 290x290Spot diameter µm ~25 ~35 ~50 ~85=̂ Resolution dpi 1000 725 500 300
3.12 3.13Laser protection window 100x200 120x270Dimensions Height mm 128 148 Width mm 228 298 Thickness mm 3 3
3.11Mounting plate FL+TDimensions Width mm 144 Depth mm 460 Thickness mm 6
3.14 3.15Assembly frame 100x200 120x270Dimensions Height mm 128 148 Width mm 228 298 Thickness mm 2 2
290x290
180x180
541±
10
302±
4
202±
4
141±
2
112x112
69x69
Working distance Marking field
Adapter cables FL/FL+
User I/O and remote interfaces have different connector pin assignments between FL and FL+. The adapters allow the marking lasers FL+ to be connected to even older installations. The E-Stop also requires an adapted wiring.
3.1, 3.3, 3.6, 3.9
3.11
3.12, 3.13
3.14, 3.15
3.16, 3.17
3.16 3.17Adapter cable set FL-PCI/FL+ FL-TCP/FL+
Adapter cable Remote FL/FL+
Adapter cable User I/O FL-PCI/FL+ –Adapter cable User I/O FL-TCP/FL+ –
Description E-Stop
7
Overview marking laser systems
LM+ LSG+65 LSG+100E THS+Basic THS+M
1.1 Marking laser FL+T 20 W 1.2 Marking laser FL+T 30 W 2.1 Marking laser FL+R 10 W
2.2 Marking laser FL+R 20 W
2.3 Marking laser FL+R 30 W
2.4 Marking laser FL+R 50 W
3.1 Plano-spherical lens F-Theta 100.1
3.3 Plano-spherical lens F-Theta 160.1
3.6 Plano-spherical lens F-Theta 254.1
3.9 Plano-spherical lens F-Theta 420.1
4.1 PC in 19“ rack mount 4RU
4.2 Monitor 19“
4.3 - 4.6
Keyboard USB
5.3 External rewinder ER 4/300 LM
5.56.7
Mobile cart
7.3 Linear axis X400
7.4 Rotary axis ZD30
7.7 Axis controller 2S
7.9 Rotary table module RTM650
7.10 Typeplate handling on request
10.110.2
Extraction and filter device AF1.1
8
Laser label marker LM+
The laser label marker allows to precisely mark and cut labels in different sizes out of continuous material without the need of additional tools.
After the marking, labels made of of laser markable foil can be separated via cutter or rewound by using an external rewinder.
Technical data 5.1 5.2Laser label marker LM+160.1 LM+254.1Working area HxWxD mm 5x160x190Positioning accuracy mm 0.2Transport speed mm/s 200Interior light LEDMaterial Die cut or continuous thickness mm 0.055-0.3 weight up to g/m2 500 width mm 25-120Label height max. mm 180
Roll outer diameter max. mm 300 core diameter mm 76 winding Outside or insideFor plano-spherical lens type 160.1 254.1Marking field mm 112x112 120x180Working distance mm 202 302Dimensions and weightHxWxD mm 520x440x802Laser protect. window HxW mm 50x100Mounting feet Ø mm 50Connector extraction Ø mm 50Weight kg 22Operating dataOperating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE
Cutter
5.1, 5.2
Control panelLED indicators Continuous material
Labels
Push buttons Material feed forwardsMaterial feed backwards
Cut
Switches Automatic/manualE-Stop
MonitoringSafety circuits ClosedPressure roller LockedMaterial In marking position/no materialInterfacesInterlock/E-Stop FL+
Serial RS232 C FL+ Con5External E-StopCutter
Laser label marker LM+with mobile cart, an external rewinder on the console, a column to attach a monitor and an extraction and filter device AF1.1
Accessories
External rewinder
Hose set
Mobile cart
Console
Column for monitor
5.3
5.4
5.5
5.6
5.7
9
Laser safety housing LSG+65
The laser safety housing LSG+65 offers a professional solution that allows an easy and fast marking of single workpieces and small series. The desktop version provides enough working space even for larger workpieces. The manual operation door is balanced. Keyboard and monitor may, as an option, be installed in an ergonomic way on a pivot arm.
Technical data 6.1Laser safety housing LSG+65Working area HxWxD mm 200x530x380Base plate T-slot WxD mm 495x375Pitch mm 25Z axis stroke mm 240Positioning accuracy mm 0.1Interior light LEDOperating door ManualFor plano-spherical lens type 100.1 160.1 254.1Marking field mm 69x69 112x112 180x180Working distance mm 141 202 302Workpiece height max. mm 30-270 210 110Workpiece weight max. kg 20Dimensions and weightHxWxD mm 615x675x860Laser protect. window HxW mm 200x100Mounting feet Ø mm 50Connector extraction Ø mm 50Weight kg 90Operating dataOperating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE
Control panel LED indicators Power
EmissionMarkingReadyError
Push buttons illuminated Control ON/OFFFocus finder ON/OFFExtraction ON/OFF
Air pressure ON/OFF
Interior light ON/OFFStart
Z axis UP/DOWNRotary axis LEFT/RIGHT
Switch E-StopKey switch Automatic/manualMonitoringSafety circuits ClosedCollective error Marking laser
ExtractionInterfacesInterlock/E-Stop FL+
Remote FL+
Digital I/O FL+
Step motor z axis, rotary axisExtraction and filter device AF1.1
6.1
Accessories
Pivot arm for monitor with keyboard tray
Rotary axis
Suction hose
Mobile cart
6.2
6.7
6.3
6.6
10
Laser safety housing LSG+100E
The laser safety housing LSG+100E offers the industrial solution that allows the marking of parts in series with the FL+ marking laser. The robust metal design provides a large working area and enough space for the integration of laser source and industrial PC into 19“ rack mounts.
Keyboard and monitor are installed in an ergonomic way on a pivot arm. The operation door opens and closes pneumatic driven.
Control panelLED indicators Power
EmissionMarkingReadyError
Push buttons illuminated Control ON/OFFFocus finder ON/OFFExtraction ON/OFF
Interior light ON/OFFStart
Z axis UP/DOWNX axis LEFT/RIGHT
Rotary axis LEFT/RIGHTOPEN/CLOSE door
Reserve
Switch E-StopKey switch Automatic/manualMonitoringSafety circuits ClosedCollective error Marking laser
ExtractionInterfacesInterlock/E-Stop FL+
Remote FL+
Digital I/O FL+
Step motor z axis, x axis, rotary axisExtraction and filter device AF1.1
Technical data 7.1 7.2Laser safety housing LSG+100E 230 V LSG+100E 120 VWorking area HxWxD mm 460x980x980Groove plate T-slot WxD mm 550x375Pitch mm 25Z axis stroke mm 440Positioning accuracy mm 0.02Repetitive accuracy mm ±0.02Traversing speed max. mm/s 60Interior light Low energy light bulbOperating door Electric driveOpening/closing time s <2For plano-spherical lens type 100.1 160.1 254.1 420.1Marking field mm 69x69 112x112 180x180 290x290Working distance mm 141 202 302 541Workpiece height max. mm 60-490 430 330 90Workpiece weight max. kg 50Dimensions and weightHxWxD mm 2280x1000x1120Laser protect. window HxW mm 100x200Mounting feet Ø mm 80Connector extraction Ø mm 50Rack mount for marking laser FL+ and PC
19“, 4RU
Weight kg 395Operating dataOper. voltage/frequency VAC/Hz 220-240/50 100-140/60Power ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE
7.1, 7.2
Accessories
Linear axis
Rotary axis
Axis controller
Round table module
Laser typeplate handling on request
7.3
7.4
7.7
7.9
7.10
11
Laser safety housing LSG+100E
Setup doorThe large setup door allows easy access to the laser safety housing LSG+100E. By this, jigs may comfortably be mounted on the groove plate in the well-lit working space.
Linear axis Z400Allows precise and fast focus adjustment. With buttons integrated in the control panel the linear axis is traversed in setup operation.
Turning axis ZD30 with 3-jaw chuck
7.3
7.4, 7.5
AccessoriesLinear axis X400Allows to precisely position user-specific jigs or pallet carriers with a maximum weight of 50 kg.
7.3Linear axis X400Traversing distance mm 440Positioning accuracy mm 0.02Repetitive accuracy mm ±0.02Traversing speed max. mm/s 60Dimensions HxWxD mm 110x835x200Load capacity kg 50Weight kg 16
Turning axis ZD30For marking the outline of round components. These can be manually clamped in the 3-jaw chuck.
7.4Turning axis ZD30Rotation speed U/min 0-40Operating torque Nm 12Increment min. [arcmin] 2.5Holding torque Nm 2.0Dimensions HxWxD mm 105x125x128Weight kg 3
7.53-jaw chuck ZD30
Clamping range Ø inner mm 23-76
Ø outer mm 3-76
12
Laser typeplate handling THS+
The laser typeplate handling THS+ allows to durably mark flat parts as e.g. typeplates or marker sheets made of plastics or metal.
Designed for the processing of nameplates for motors, pumps, control cabinets, and others it is used for applications in demanding industrial environments where the contents needs to be clearly legible even after years.
Two different designs are available:
Type 1 “THS+Basic”Plates or other flat parts up to a thickness of 4 mm are individually inserted into a jig, fed after start, marked and then automatically rejected.
Type 2 “THS+M”The plates are stacked in a magazine. The upper one of a stack is marked and then automatically rejected.
Technical data 8.1 9.1Laser typeplate handling THS+Basic THS+MWorking area HxWxD mm 10x120x120 –Typeplate WxH min. mm max. mm
– 40x40– 110x90
Positioning accuracy mm ±0.2Handling motor driven Linear slide MagazinePlates 0.5 mm piece 1 100For plano-spherical lens type 160.1Marking field WxH mm 112x112 110x88Working distance mm 202Thickness plate max. mm 4 0.5-1.0Workpiece weight max. kg 0.5 0.1Dimensions and weightHxWxD mm 299x176x340Laser protect. window HxW mm 100x98Connector extraction Ø mm 50Total weight kg 14Operating dataOperating voltage/frequency 110-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85% not condensing stock 0-60 °C/20-80% not condensing transport –25-60 °C/20-80% not condensingLaser safety class EN60825-1 Class 1Approval CE
Control panel THS+Basic THS+MPush buttons illuminated Tray OPEN/CLOSE
AutostartSynchronizing/
Manual rejection
Switch E-StopMonitoringSafety circuits ClosedLinear slide Position –Magazine – PositionTypeplate In marking positionInterfacesInterlock/E-Stop FL+
Digital I/O FL+
Extraction and filter device AF1.1
THS+Basic
THS+M
8.1 9.1
Accessories
Customer-specific jig for THS+Basic
Customer-specific magazine for THS+M
8.2
9.2
Dire
ctio
n of
tran
spor
t Corner radius R at least 1 mm
Left/right 1 mm margins not markable
Type plate THS+M
13
Extraction and filter devices AF1.1
Material processing with lasers produces toxic dust and gaseous contaminants. The extraction system protects the operator’s health and prevents the working area and lens from being contaminated, thus providing a constant laser output power.
The contaminated air of the working area is extracted by a high-power turbine and transported to the filter unit via a flexible hose. Contaminant particles, respectively dust are filtered out in the pre-filter and filter for suspended particles. Gaseous contaminants are absorbed by the active carbon filter. The cleaned air is then diverted into the environment.
The extraction and filter device AF1.1 features
• compact design, • small footprint,• simple and fast change of filter,• low sound level due to extract air silencer,• monitoring of filter saturation and motor.
Option: additional safety filter bag for rough particles and dusts
Consumables
Safety filter bag
Pre-filter
Filter for susp. particles
Active carbon filter
Option
Suction hose 10.410.3
10.7
10.5
10.6
Technical data 10.1 10.2Extraction and filter device AF1.1-230 AF1.1-120Suction capacity max. m3/h 320Vacuum max. Pa 12500Filter Separation ClassSafety filter bag
Pre-filter 96-98% M5
Filter for susp. particles ≥ 99,95% H13
Active carbon filter 10L
Dimensions and weight
Device HxWxD mm Weight approx. kg
682x355x35535
Connector extraction Ø mm 50Operating dataOperating voltage/frequency VAC/Hz 230/50 120/60Power consumption max. kW 1.2Sound level dB (A) <67Protection class IP 42Temp./air humidity operation 5-40 °C/10-85 % not condensing
stock 0-60 °C/20-80 % not condensing
transport –25-60 °C/20-80 % not condensingApproval CE
Operation panelPower ON/OFFLED indicators for Filter
Push button 1 LED indicator green
Extraction ON/OFF
Push button 2 LED indicator red
Reset
Adjusting knob Speed regulationInterfaceDigital I/O interface a Extraction ON/OFF
Operation OKCollective error
24 VDCMonitoringFilter Saturated
Motor Defective
Standard Optionally
Larger extraction devices on request
10.1, 10.2
14
Marking software cabLase
All FL+ marking lasers have installed the marking software cabLase Editor 5. Key features are:
• Graphic design of layouts• Control of marking• Monitoring marking process
• Stand-alone modecabLase supports marking without the need of a PC. Marking layouts and associated fonts are downloaded and then transferred to the laser control for further management. Allows process control and monitoring by digital signals.
• Remote host modecabLase allows to be remote controlled via serial, Ethernet or ProfiBus connection by a host control, e.g. PC/PLC. Programming commands are available to select layouts, to change marking data, for process control and monitoring.
• Remote API interfaceSpecially designed to be integrated into demanding manufacturing environments. Allows to generate objects, its parameter setting, management and processing of associated layouts and variable contents externally from a PC or via PLC.
• COM Automation Server For individual, customizable marking applications. It offers a command library with all functions of the marking software cabLase.
• Integration in ERP and MES systemscabLase offers program modules for the integration of laser marking systems into MES and ERP platforms. As member in SAP’s Printer Vendor Program cab has access to e.g. implement marking applications to the SAP data stream.
cabLase overviewSoftwareSoftware cabLase Editor 5CharactersFonts All TrueType fonts installed in Windows,
filled or as outline, laser specific single, double and triple line fonts. All fonts can be freely sca-led and „wobbled“.
Alignment Any alignment and direction of rotation, circular arc marking
Character spacing Stretching and compressingGraphicsGraphic elements Lines, circles, rectangles, polygones; Hatching
of all filled surface elements
Graphic formats PLT, DXF, BMP, JPG, PCX, WMF, EPS, TIF;All graphic elements can be scaled, moved, rotated, grouped or mirrored. Special tools are available to align the objects.
BarcodesLinear barcodes Interleaved 2/5
Code 39, Code 93Code 128
CodabarEANUPC
2D-Codes Data Matrix, ECC200, QR codeAll codes are variable in height, module width and ratio. Optionally: check digits, inverted codes
Additional featuresSerial number, time, dateVariable fieldsInsertion of graphic data out of Windows programsProgrammable laser parametersStorage of process and parameter filesControl of digital in- and outputs
Control and monitoring of additional axes, e.g. lifting, rotary and linear axes
Industry 4.0 and the Internet of Things symbolize tomorrow’s smart production. Software for users and connectivity are key technologies to be implemented. cab FL+ marking lasers are designed for the future and supplied with all necessary program and data interfaces. We will be pleased to advise you on questions about your application!
Industry 4.0
15
Part no. Device
1.2 Tower 5527530 Marking laser FL+20T
1.3 5527540 Marking laser FL+30T
2.1 Rack 5527250 Marking laser FL+10R
2.2 5527580 Marking laser FL+20R
2.3 5527590 Marking laser FL+30R
2.4 5527450 Marking laser FL+50R
Scope of delivery Marking laser FL+
USB software dongle cabLase Editor 5Power cable type E+F, 1,8 mPatch cable CAT 5e, 3 mAssembly instructions de/en
Part no. Accessories
3.1 5525039 Plano-spherical lens F-Theta 100.1 69x69 mm
3.3 5527254 Plano-spherical lens F-Theta 160.1 112x112 mm
3.6 5525038 Plano-spherical lens F-Theta 254.1 180x180 mm
3.9 5527405 Plano-spherical lens F-Theta 420.1 290x290 mm
3.11 5527237 Mounting plate FL+T
3.12 5907189 Laser protection window 100x200 mm
3.13 5906286 Laser protection window 120x270 mm
3.14 5527416 Assembly frame 100x200 mm
3.15 5527419 Assembly frame 120x270 mm
3.16 5527478 Adapter cable set FL-PCI/FL+
3.17 5527479 Adapter cable set FL-TCP/FL+
Part no. Device
4.1 5570125 PC in 19" rack mount 4RU
4.2 5570130 Monitor 19“
4.3 5901626 Standard keyboard USB de4.4 5901677 Standard keyboard USB en4.5 5901621 Keyboard with trackball USB de4.6 5901651 Keyboard with trackball USB en
Laser marking – Product range
Part no. Device
5.1 5527265 Laser label marker LM+160.1
5.2 5527485 Laser label marker LM+254.1
Scope of delivery Laser label marker LM+
Power cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/15 pole, 3 m, for extraction AF1Funnel for scan headGuide 1 mm for label transportGuide 2 mm for label transportCutterBlind plug for extractionJoint with throttle valve for extractionAssembly instructions de/en
Part no. Accessories
5.3 5525355External rewinder ER 4/300 LM
5.4 5527655 Hose set LM+
5.5 5527585 Mobile cart
5.6 5527675 Console r/l
5.7 5527705 Column for monitor
16
Laser marking – Product range
Part no. Device
6.1 5527245 Laser safety housing LSG+65
Scope of delivery Laser safety housing LSG+65Power cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Assembly instructions de/en
Part no. Accessories
6.2 5526167Pivot arm formonitor with keyboard tray
6.3 5905933 Rotary axis ZD30
6.4 5905978 3-jaw chuck ZD306.5 5526156 Connecting cable ZD306.6 5905818 Suction hose, 2.5 m
6.7 On request: Mobile cart
Part no. Device
7.1
5528090Laser safety housing LSG+100E 230 V
7.2 5528095Laser safety housing LSG+100E 120 V
Scope of delivery Laser safety housing LSG+100EPower cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Pivot arm for monitor with keyboard trayAssembly instructions de/en
Part no. Accessories
7.3 5527690 Linear axis X400
7.4 5905933 Rotary axis ZD30
7.5 5905978 3-jaw chuck ZD307.6 5526156 Connecting cable ZD307.7 5527685 Axis controller 2S7.8 5527665 Connecting cable 2S7.9 5526030 Rotary table module RTM6507.10 On request: Laser typeplate handling 7.11 5525994 Roller set
Part no. Device
8.1 5527285Laser typeplate handling THS+Basic
Scope of delivery Laser typeplate handling THS+BasicPower cable type E+F, 3 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Assembly instructions de/en
Part no. Accessories
8.2 On request: Customer-specific jig
Part no. Device
9.1 5527290Laser typeplate handling THS+M
Scope of delivery Laser typeplate handling THS+MPower cable type E+F, 3 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Assembly instructions de/en
Part no. Accessories
9.2 On request: Customer-specific magazine
Part no. Device
10.1 5907275Extraction and filter device AF1.1-230 including filter set
10.2 5907280Extraction and filter device AF1.1-120 including filter set
Scope of delivery Extraction and filter device AF1.1Pre-filterFilter for suspended particlesActive carbon filterPower cable type E+F, 2,5 mAssembly instructions de/en
Part no. Accessories
10.3 5905818 Suction hose, 2.5 m
Part no. Consumables PU10.4 5906623.001 Safety filter bag 110.5 5906617.001 Pre-filter AF1/AF2 1010.6 5906618.001 Filter for susp. part. AF1/AF2 110.7 5906619.001 Active carbon filter AF1/AF2 1
19
Product overview
Label software cablabel S3Design, print, monitoring
Label dispensers HS/VSfor horizontal or vertical dispensing
Labeling heads IXORto be integrated in labeling machines
Print and apply systems Hermes+
for automation
Marking lasers FL+
with output powers 10 to 50 wattLaser marking systemsfor industrial solutions
Label printers XD4Tfor double-sided printing
Label printers A2+
industrial device up to print width 57 mm
Label printers A6+
industrial device up to print width 168 mm
Label printers A8+
industrial device up to print width 216 mm
Label printers SQUIX
industrial device up to print width 108 mm
Label printers EOS1desktop device for label rolls up to diameter 155 mm
Label printers EOS4desktop device for label rolls up to diameter 210 mm
Label printers MACH1/2in the lower price segment
Label printers MACH4where little space is available
Label printers XCfor two-color printing
Labelsof more than 400 materials
Ribbonsin wax, resin and resin/wax qualities
Print modules PXto be integrated in automatic labeling systems
Print and apply systems Hermes Cfor two-color printing and applying
2
3
4
5
6
7
1
This document and any translations hereof are the property of cab Produkttechnik GmbH & Co KG. © cab/9009751The replication, processing, reproduction or distribution in whole or in parts requires our prior written consent.
Headquarters and fabrication in Germany
to International subsidiaries
There are further 820 distribution partners in more than 80 countries.
2 7
Asia
Taiwancab Technology Co., Ltd.
16F-1, No. 700, Jhong Jheng RdJunghe, Taipei 23552phone +886 (02) 8227 3966fax +886 (02) 8227 3566info.asia@cab.dewww.cab.de/tw
Chinacab (Shanghai) Trading Co., Ltd.
A507, No. 268, Tong Xie RdShanghai 200335phone +86 (021) 6236 3161fax +86 (021) 6236 3162info.cn@cab.dewww.cab.de/cn
cab (Shanghai) Trading Co., Ltd.
Room 39, 10F, 8 Lin He Zhong Rd Tian He District, Guangzhou 510610phone +86 (020) 2831 7358info.cn@cab.dewww.cab.de/cn
Europe
Germanycab Produkttechnik GmbH & Co KGWilhelm-Schickard-Str. 1476131 Karlsruhephone +49 721 6626 0fax +49 721 6626 129info@cab.de www.cab.de
Francecab Technologies S.à.r.l.2a Rue de la ModerZ.A. Nord du Val de Moder67350 Niedermodernphone +33 388 722501fax +33 388 722502 info.fr@cab.dewww.cab.de/fr
America
USAcab Technology, Inc.87 Progress Avenue Unit 1Tyngsboro, MA 01879phone +1 978 649 0293fax +1 978 649 0294info.us@cab.dewww.cab.de/us
Latin America Alejandro BalmacedaHacienda Jurica Pte 1615Colonial de Valle32553 Juárez, Mexicophone +52 656 682 4301a.balmaceda@cab.dewww.cab.de/es
Africa
South Africacab Technology (Pty) Ltd.14 Republic StreetBordeaux2125 Randburgphone +27 11 886 3580fax +27 11 789 3913info.za@cab.dewww.cab.de/za
Sta
tus:
10/
2016
1
top related