catalog no. 109claridge now offers three porcelain enamel writing surfaces: • lcs-ii markerboard...
Post on 09-Jul-2020
4 Views
Preview:
TRANSCRIPT
EASTERN DIVISION Sales and Warehouse500 Ogden AvenueP. O. Box 189Mamaroneck, New YorkZip 10543-0189Phone: 914-381-5330Fax: 914-381-2145east@claridgeproducts.com
MIDWEST DIVISIONSales and Warehouse713 South Vermont StreetPalatine, Illinois Zip 60067-7138Phone: 847-991-8822Fax: 847-991-9057mw@claridgeproducts.com
SOUTH CENTRAL DIVISIONSales and Warehouse3248 Towerwood DriveFarmers Branch, TexasZip 75234-2315Phone: 972-247-8075Fax: 972-484-8149sc@claridgeproducts.com
WESTERN DIVISIONSales and Warehouse14736 Wicks BoulevardSan Leandro, CaliforniaZip 94577-6770Phone: 510-351-8183Fax: 510-351-8241west@claridgeproducts.com
MAIN OFFICE AND PRODUCTION FACILITY601 Highway 62-65 SouthP. O. Box 910Harrison, ArkansasZip 72602-0910 Phone: 870-743-2200Toll Free: 800-434-4610Fax: 870-743-1908claridge@claridgeproducts.com
CLARIDGE LOS ANGELESManufacturing & Distribution1477 Davril CircleCorona, CaliforniaZip 92880-6957Phone: 951-734-6262Fax: 951-734-6464claridge@claridgewest.com
Product catalog
10 11 00/CLCBuyLine 3119
Catalog No. 109
Series 1Factory Built Units
SERIES 1, 3, 4, 5, 8, and 185
• Perimetertrimis11/2”wide.
• Furnishedwithanglecliphangers2’oncenter,topandbottom.
SERIES 1
• Perimetertrimis11/4”wide.
• Furnishedwithanglecliphangers2’oncenter,topandbottom.
SERIES 3
Series 3
Series 4
• Perimetertrimis5/8”wide.
• Furnishedwithclipanglehangers2’oncenter,topandbottom.
SERIES 4
Typical Markerboard, Chalkboard & Tackboard Arrangements
Series 4 Factory Built Units
Tackboard
Mullion Map Railwith Cork Insert
Maprail withCork Insert
End Closure
Chalktrough
803-F Joint Strip
Tackboard
TackboardSill Trim
TackboardHead Trim
Tackboard
Jamb Trim
Markerboardor
Chalkboard
3 1/4"
1 5/16"
1"
Mounting Angle ClipsTypical at Top &
Bottom of all Units
Markerboardor Chalkboard
1-1/4"1"
1"
Markerboardor Chalkboard
5/8"
2 ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Features:• PorcelainenamelsteelLCSmarkerboardsand
Vitracitechalkboards
• ClaridgeCork,Fabricork,DesignerFabric,Hook-Fab,andTanNucorkTackboards
• Satinanodizealuminumframe
• Maximumlength,16’0”;maximumheight-TypeAandTypeCOunits-4’0”
• O.A.panelthicknessapprox.1/2”
Options:• Coloranodizeorpowdercoatfinishaluminum
frames
• Radiuscornersavailable,Series4units
Finishedsizeofunitsis¼”largerinheightandwidththansizeslisted.Ifexactoverallsizeisrequired,specifywhenordering.
Installationusing16Aadhesiveisrecommended.Screwsorwallanchorsarenotincluded.
Freightclass70.
Visit www.claridgeproducts.com for CAD library and specifications.
Factory Built Units
• Perimetertrimis5/8”wide.
• Furnishedwithsteelmountingclipsattopandangleclipsatbottom,2’oncenter.
SERIES 5
• Perimetertrimis5/16”wide.
• Furnishedwithclipanglehangers2’oncenter,topandbottom.
SERIES 8
Series 5
Series 185
• Perimetertrimis1-1/2”wide.
• FurnishedwithZ-barclipsfortopandangleclipsforbottom,2’oncenter.
Note:Necessary12”square,1/2”Duracoreblockingpadsarefurnished.
SERIES 185
10 11 00/CLCBuyLine 3119
3ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
LCS-II Markerboards• Premiumwritingsurfaceineither#92Whiteor#75LowGloss,bothwithasmooth
surfaceforeasywritingandcleanerasing
• Minimal“hotspot”(#75LowGlosscanbeusedasaprojectionsurface)
• Madefromenamelinggradesteelduringa3-coatprocess
• Afterpre-cleaningaground(primer)coatofporcelainisappliedtofrontandbackofsteel;colorcover(finish)coatisappliedtofaceofsteelandisfusionbondedtothesteelsubstrate
Claridgenowoffersthreeporcelainenamelwritingsurfaces:• LCS-IImarkerboarddry-erasewritingsurfacein#92Whiteor#75LowGloss
• LCSmarkerboarddry-erasewritingsurfaceforfacesheetsandskins
• Vitracitechalkboardwritingsurface
Vitracite® Chalkboard and LCS® Markerboard Steel Skins(Made from aluminized steel sheets)
Themostpracticalandeconomicalwaytorejuvenateoldchalkboards is to installsteelskins(facesheets)overexistingold,badly-wornchalkboards.Steelskinscanbeappliedon the face of natural slate, composition chalkboard, or slated plasterwalls. Convertsold defective boards into permanent new markerboards or chalkboards of superiorqualitywhichwillprovidemanyyearsofservice.Sheetsareshippedprecuttocustomer’sspecifications.Skinscanbeinstalledbyqualifiedinstallerusing16AAdhesive,commercialadhesive,ordouble-sidedtape,inaccordancewithlocalbuildingcodes.
InTRODUCIng LCS EZ STICk SkInSDesignedtomakeresurfacingexistingboardsabreeze,EZStickSkinsareLCSSkins(facesheets)backedwithdouble-sidedtape.EZStickSkininstallationsusenosolvents,eliminatedryingtimeandarealwaysaconsistentthickness.Measuretoverifyfit,cleanoldboardsurface,positionnewskin,peelandstick-itsthateasy.
InTRODUCIng EZ FIT PAnELSDesignedtofitoverexistingboards,EZFitpanelsareLCS-IIineither#92Whiteor#75LowGloss.Porcelainwritingsurfaceismountedonhardboardwithmoisturebarrierback.Panelshave½”facesatinanodizealuminumframe.Holesarepre-drilled2’oncenter;1”countersinkscrewsincluded.
S873MarkerboardandVisualCommunicationSystemClaridge LCS-II low gloss porcelainwriting surface combineswith3M’sSCP712SuperCloseProjectoranddigitalannotationsensortoprovideanidealsolutionformemorablepresentations.
• LCS-IIwithlow-glosssurfaceforeasywriting,cleanerasing,andcrispprojection;notchedaluminumframeforcordmanagement
• Projectormountsabovetheboardvirtuallyeliminatingallshadowsforinteractivemarkerboarduse
• SuperCloseProjectorhassinglebuttonoperation;wallmountingprovidesfortheunittobepositionedandreadytouseatamoment’snotice
Easytouse,simpletoinstall.
L2EBS3-LCS-IIandeBeamSystem3CompleteTheworld’ssmallestinteractivemarkerboardsolutionANDanLCS-II porcelain enamel steel markerboard with a low glossidealforwriting,erasingandprojecting-allatthesametime.
• eBeamreceiverispermanentlyattachedtothefaceofthemarkerboard
• eBeamCompletesoftwareandallaccessoriesincluded
• Satinanodizedaluminumframewith3/8”faceprovidescordmanagementthroughadeep,notcheddesign
• Z-barhangersforeasyinstallation.
Vitracite Porcelain Enamel Steel
Chalkboard Skins — 3 colors
LCS Porcelain Enamel Steel Markerboard Skins —
2 colors
LCS-II-217-M no. 75 LCS-II Low-gloss White Markerboard
FaceSheetMDFCoreMoistureBarrierBacking
MarkerboardandChalkboardColorsLCS-II•LCS•Vitracite
No. 75 LOW GLOSSWHITE
No. 92 LCS-IIWHITE
LCS-II(usewithLCSmarkers)
No. 41 LCSLIGHT GRAY
No. 32 LCSWHITE
LCS-forskinsorfacesheetsonly(usewithLCSmarkers)
No. 16CHARCOAL GRAY
No. 13BLACK
No. 19 ClearciteGREEN
Vitracite(usewithchalk)
4 ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Tan nucork Bulletin Board
• Puregrainnaturalcorkwithoutburlapbacking
• Smooth,resilientsurface
• Punctureshealquickly
• Tacksinserteasily,grippedfirmly
• MeetsMilitarySpecMIL-C-15116,TypeII
1689 Wedgewood 1694 Blue Topaz 1695 Amethyst 1691 Quartz 1699 Quarry 1698 Pearl
1690 Gray Mix 1697 Mulberry 1696 Thistle 1684 Noir 1692 Wheat 1688 Seafoam
1676 Green Apple 1677 Geranium 1678 Straw 1679 Lapis 1680 Angora 1681 Fossil
Claridge Cork Bulletin Board
• Environmentallyfriendly,burlapbackedcork• Purenaturalingredients• Smooth,durablesuede-likesurface• Self-healing,soilresistant• Tacksinserteasily,grippedfirmly
3102
3102EW
3104
Designer FabricBulletin Boards
• Soilandstainresistant
• 100%polyester
• DesignerFabricshaveASTM-E84FlameTunnelTestClass“A”rating
Hook-FabBulletin Boards
• Lightweightandpliable,yetdurable
• Soilandstainresistant
• Usewithhooktapeorthumbtack
1/4” Unmounted Claridge Cork
1/4” Mounted Claridge Cork
Premium Designer Fabric Selection
1500
1380
1380EW
Premium Vinyl Selection
10 11 00/CLCBuyLine 3119
970 Lime 971 Chili Red
972 Sand 973 Silver
974 Dark Blue 975 Lightsout
150or150FR
380A
550
Fabricork Bulletin Boards
• Wearalmostindefinitely
• Entirelywashable;spotsandsoilwashawaywithhouseholdsoapandwater
• VinylfabricmeetsorexceedsFederalSpecificationCCC-W-408A
B220 Antique White B221 Beige C620 Dover C621 Opal C622 Jade Mist
C623 Slate Gray F223 Frost F559 Dawn Blue F560 Dusk Blue F571 Champagne
F573 Pearl Gray F577 Mist Green F578 Off White F580 Blush F581 Academy Gray
F592 Cream F593 Mauve F595 Slate Green T421 White T422 Natural
S634 Moonlit S635 Tobacco S636 Cranberry S637 Smokescreen S638 Spice S639 Haze
934
930
5ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Snap-On Aluminum Trim Detail
The most versatile of the field assembled trims, snap-on trim, with its wide face and no visible fasteners, adjusts to job conditions and joins in a neat, precision fit.
Snap-On, Screw-On, and Slip-On aluminum trim is typically furnished in stock lengths to be cut to size and applied in the field.
Trim Selection Elevation
Type A
A
B B
C
Type D
B
B B
C
D
Type CO
B
B B
B
Type F
B
B B
CB B
DEScrew-On Aluminum Trim Detail
Screw-on aluminum trim, with exposed fasteners, is noted for ease of installation.
The narrow face of slip-on trim gives it a clean, low-profile appearance.
Slip-On Aluminum Trim Detail
Divider Bars, Channel Trim & Angle TrimDivider BarsNumber Opening Face StockLengths803 1/4” 1/2” 10’6”and12’0”803A 1/2” 1/2” 10’6”and12’0”803F 1/2” 1” 10’6”and12’0”12314 7/16” 1” 10’6”and12’0”
Dividerbarsweighapproximately1/4lb.perlin.ft.Shippedbymotorfreight.Usefreightclass85.
Channel TrimNumber Opening Face StockLengths804 1/4” 1/2” 8’0”and12’0”804A 1/2” 5/8” 8’6”,10’6”,12’6”, 17’0”and21’0”
Channeltrimweighsapproximately1/4lb.perlin.ft.8’0”and8’6”lengthscanshipUPSorFedExGround.Balanceoflengthswillbeshippedmotorfreight.Usefreightclass85.
Angle TrimNumber Description StockLengths160 1”x1”x1/16”angletrim 12’6”161 1”x1/2”x1/16”angletrim 12’6”162 1”x1”x1/8”angletrim 12’6”
No.160andNo.161angletrimweighsapprox.1/4lb.perlin.ft.No.162weighs1/3lb.Angletrimisshippedbymotorfreight.Usefreightclass85.
6 ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Marker WallsLCS Porcelain Enamel Steel Skins with matched butt joints are ideal for most wall conditions.
• Coveranentirewall,floor-to-ceiling
• Utilizeallavailablespace
• Panelsbutttogetherforacontinuouswritingsurface
When laminated panels are required, LCS, mounted on 7/16”MDF,hasmatchedbuttjointsandcanbejoinedwithsteelsplinejointsforsmoothalignment.ForamorefinishedlookuseNo.1016perimetertrim.
Marker Wall Detail
Tack WallsEdge-wrapped panels of either Fabricork or Designer Fabric butt together to cover an entire wall or work space, floor-to-ceiling.
• ChoosefromFabricorkandDesignerFabriccolors
• Idealforoffices,boardrooms,conferencerooms,etc.
• Edge-wrappedpanelscanbecustom-madetofitexistingwalls
Where trim is required, fabric coveredH-bars,fabric covered trim and fabric covered insideandoutsidecornersarealsoavailable.
Tack Wall Detail
10 11 00/CLCBuyLine 3119
7ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Horizontal Sliding Units• ManuallyorMotorOperatedSlidingUnits
• Fixedbackpanelwith2,3or4slidingpanelson2,3or4tracks
• Slidingpanelsare top-suspendedandglideeasilyoveraluminumtrackonmoldednylonrollers
• Nylonballbearingrollersattopofunitandnylonguiderollersatbottomeliminatevibrationandprovidesmooth,quietoperation
• Slidingpanelsandbackpanelcanbe:LCSmarkerboard;Vitracitechalkboard;orClaridgeCork,Fabricork,DesignerFabric,Hook-Fab or Tan Nucork bulletin board;Matte white or glass beadedprojectionscreen;orCOMfabrics
• Trimandpanel edgingareextrudedaluminumwith satinanodizefinish(Powdercoatandcoloranodizefinishoptional)
• Componentparts(slidingpanelswithtrack,guidechannel,hardware-nohousing)available
Horizontal Sliding UnitsNumber Size (H x W) Number Size (H x W)HS46 4’ x 6’ HS414 4’ x 14’HS48 4’ x 8’ HS416 4’ x 16’HS410 4’ x 10’ HS420 4’ x 20’HS412 4’ x 12’ HS424 4’ x 24’
Vertical Sliding Units• ManuallyorMotorOperatedSlidingUnits
• Floorandwallmounted(panelsonwallmountedunitsslidefromsillortraytotopofunit;panelsonfloormountedunitsslidefromfloortotopofunit)
• One,twoorthree7/8”thickslidingpanels(2-panelhousingis6-1/2”deep;faceis4”)
• Balanced, lightweight panel construction guards againstwarpage;povidesneededrigidityandeliminates toand fromovementwhenpanelsareinuse.
• Slidingpanels andbackpanel canbe: LCSmarkerboard;Vitracitechalkboard;orClaridgeCork,Fabricork,DesignerFabric,Hook-FaborTanNucorkbulletinboard;Mattewhiteorglassbeadedprojectionscreen;orCOMfabrics
• Trim and panel edging are extruded aluminum with satinanodizefinish(Powdercoatandcoloranodizeoptional)
Vertical Sliding UnitsManually Operated Motor OperatedFloorMounted WallMountedNumber High-Long Number High-Long Number High-Long410CS 10’x4’ 48CSW 8’x4’ 410MO 10’x4’510CS 10’x5’ 58CSW 8’x5’ 510MO 10’x5’610CS 10’x6’ 68CSW 8’x6’ 610MO 10’x6’810CS 10’x8’ 88CSW 8’x8’ 810MO 10’x8’1010CS 10’x10’ 108CSW 8’x10’ 1010MO 10’x10’1210CS 10’x12’ 128CSW 8’x12’ 1210MO 10’x12’1410CS 10’x14’ 148CSW 8’x14’ 1410MO 10’x14’1610CS 10’x16’ 168CSW 8’x16’ 1610MO 10’x16’
OptionalKickPanelandoptionalWirelessremotecontrol.Approvedshopdrawingsrequired.Freightclass70.
Section "B-b"
"B"
Typical Elevation
CounterWeight
WeightCounter
Notes:Removable Access Covers For Head Assemblies And Cover Plates For Motor Drives Must Be Accessible.Section A-A Head Details For Both Manually Operated And Motor Driven Units Are Shown.Detail Is Common To Both Types Of Units BelowTop Breakline.
1.
2.
"B"
Section "A-A"
Typical (4) Per Panel
1/2" Kick PanelBy Others OrOptional Add
Chalktrough
Fixed BackPanel
Sliding Panels
Ball BearingRoller
Panel Trim
SlidingPanel Width
FixedBackPanel
Overall Width
RemovableAccess Cover
RemovableAccess Cover
Rubber Bumpers(Top & Bottom)
BallBearing Pulleys
Finger PullsTypical For Manual
Sliding Panels
"A"
"A"
Sliding PanelHeight
Kick PanelHeight(Varies)
1/2"Typ.
2 7/16"
6 1/2"
4"
OverallHeight
1 1/4"
4"
6 1/2"
Optional Cover PlateFor Motors
RemovableAccess Cover
1/15 H.P. Motor WithGearhead Reducer
(1 Per Sliding Panel)
10 1/2"
8 ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Contemporary Series Bulletin Board CabinetFeatures:• 1-1/2”x3”rectangularaluminumperimetertrim,
satinanodizefinish;insidedepth1-3/4”• TackablebackpanelscanbeClaridgecork,
Fabricork,DesignerFabric,Hook-FaborTanNucork(grooveddirectorybackpanelsoptional)
• 3/16”temperedglassdoorswithflatkeytumblerlocks
• Hingeddoorcabinetshavecontinuouspianohinges;slidingdoorunits,ground-infingerpulls
• SurfacemountedunitsequippedwithZ-barhangers
• Availablewithheaderpanel
Options:• Fluorescentlights• Weatherproofing(hingeddooronly)• Recessedinstallation• Mediumordarkbronzeanodizeorpowdercoat
finish
Large Contemporary SeriesBulletin Board CabinetFeatures:• Heavy-gaugerectangularaluminum,satin
anodizefinish• Temperedglassdoorshungonpiano
hinges,flatkeytumblerlocks• Miteredcornersreinforcedforrigidity• TackablebackpanelsinClaridgeCork,
Fabricork,Hook-Fab,DesignerFabricorTanNucork
• Anglehangersfurnished-topandbottom• 3”housing-1-3/4”I.D.;4”-2-3/4”I.D.
Options:• 1-1/2”x3”or1-3/4”x4”housing• SurfaceorRecessinstallation• Fluorescentlight(4”cabinetsonly)• Med.orDk.BronzeAnodize;Powder
CoatFinish
Contemporary Cabinets Size WeightNumber (HxW) Lbs.2035 3’x2’ 362041 3’x4’ 722040 4’x4’ 962044 4’x6’ 1442046 4’x8’ 2562048 4’x10’ 3202050 4’x12’ 384Intermediatesizesavailable.
2041 Contemporary Cabinet
Large Contemporary Series
Size WeightNumber (HxW) Lbs.2153 5’x3’ 1802156 5’x6’ 3002164 6’x4’ 2502168 6’x8’ 500
Note: 3’ and 4’ widths have onedoor;6’and8’cabinetshavetwo.
Specify depth - 3” or 4”, recessor surface installation (if recessinstallation,providefinishedopeningmeasurements),and typeandcolorforbackpanel.
Imperial Series Bulletin andDirectory Board CabinetFeatures:
• Heavy-gaugesatinanodizealuminum;Z-barhangers
• 3/16”temperedslidingglassdoors;tumblerlock
• ClaridgeCork,Fabricork,DesignerFabric,Hook-FabandTanNucorktackablepanels;FeltorVinyldirectorypanels
• 3-1/4”O.A.;insidedepthis1-1/2”• 6”Translucent
plexiglasheaderpanel
Options:
• MediumorDarkBronzeanodize,orPowderCoatfinish
• Fluorescentlight
Imperial Series
With Without Header Header Size WeightNumber Number (HxW) Lbs.300 294 36”x48” 80302 296 36”x72” 120303 297 48”x60” 135304 298 48”x72” 160
no. 310 Bulletin Board CabinetFeatures:
• Qualityconstruction;neatlymiteredcorners
• Natural,MediumorDarkOak;Walnut,Mahogany,Cherry,andMaple,optional
• ClaridgeCork,Fabricork,DesignerFabricorHook-Fab(Groovedfeltandvinyldirectorypanelsoptional)
• 3-1/4”perimeter;insidedepthis1-1/4”
• Slidingglassdoorshoe,channelandtrackareheavy-gaugeextrudedaluminum,bronzefinish
• Z-barhangers• Fluorescentlightsareoptional
BulletinBoard Size WeightNumber (HxW) Lbs.310 36”x48” 78310A 36”x60” 98310B 36”x72” 118310C 48”x60” 130310D 48”x72” 156Freightclass100.
Note: 3’x2’ cabinethas one door; 3’x4’through 4’x6’ havetwo;and4’x8’through4’x12’havethree.
Weatherproofed Contemporary CabinetLarge Door Contemporary Detail
10 11 00/CLCBuyLine 3119
Contemporary Detail
9ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Series 370 and 390 Recessed Trophy CasesFeatures:
• Aluminumfrontswithsatinanodizefinish• TackablebackpanelsinClaridgeCork,Fabricork,Hook-
Fab,DesignerFabricorTanNucork• Low-pressurelaminatebackpanelsinOakorWalnutfinish• 3/16”temperedglassdoorswithfingerpulls,locksandkeys• Three6,8,10or12-inchwideadjustableglassshelves
withstandardsandbrackets(specifywidthrequiredwhenordering)
Options:
• WoodBox-specifydepth(upto24”)-16”depthstandard-andfinish-walnutoroaklowpressurelaminate
• Fluorescentlight• MediumorDarkBronzeAnodize,orPowderCoatFinish• HingedDoors,RadiusandFlutedFronts(370Casesonly)• CustomStylesandSizes
Masonry openingsize for 370 and390 cases is3-11/16” smallerinbothheightandwidth than O.A.casesize.
*For weight ofunit with woodbox,addapprox.5 lbs. per sq. ft.for OAcase sizeto weight shown.FreightClass125.
370 Series Recessed Cases
Sliding HingedDoor Door Size Weight*Number Number H-W Lbs.372 372H 4’x4’ 135373 373H 4’x6’ 204374 374H 4’x8’ 272375 375H 4’x10’ 340376 376H 4’x12’ 408378 378H 4’x16’ 544
4’ and 6’ cases have 1 pair slidingdoors,8’and10’caseshave2pair,and12’and16’have3pair.
Large Door Display Cases
Shipping*Number SizeH-W Weight394 6’x6’ 360lbs.395 6’x8’ 480lbs.396 6’x10’ 600lbs.397 6’x12’ 720lbs.398 6’x14’ 840lbs.399 6’x16’ 960lbs.
6’and8’caseshave2pairofslidingdoors;10’caseshave3pair;and12’,14’and16’unitshave4pair. Premiere Freestanding or Wall Mounted Display Cases
Features:
• Heavygaugealuminumframe-satinfinish• 3/16”temperedglassslidingdoorswithlocks• Threeeach6,8,10or12”wideadjustableglassshelves• TackablebackpanelinClaridgecork,Fabricork,Hook-Fab,
DesignerFabricorTanNucork• Low-pressurelaminatebackpanelsinOakorWalnutgrain
finish• Aluminumlegsandbases
ofFreestandingcasesare18”high;OAheight5’6”;floorlevelingglidesincluded
• WallmountedcasesOAheight4’0”;furnishedwithanglehangers
• 13-3/4”ID,16”OD• Twoandthreesection
casesmadeinonepiece
Options:
• MediumorDarkBronzeAnodizeorPowderCoatFinish
• FluorescentLights• IntermediateSizes
Premiere Display Cases
FreestandingAlum. Wood Wall CaseLegs Base Mounted Width 479 3’0”456 470 481 4’0”457 471 482 5’0”458 472 483 6’0”463 474 484 8’0”465 475 485 10’0”467 476 486 12’0”469 478 488 16’0”
3’, 4’, 5’ and 6’ cases have 1 pairslidingdoors;8’and10’,2pair;12’and16’,3pair.
Series 390
Large Door Detail
Wall MountedCase Detail
10 ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
Lecture Units & Credenzas
Contemporary Style Lecture Units and CredenzasCabinet Features:• Radiuscorners(except518’s);squarecornersoptional• WhiteLCS-IIlowglossporcelainenamelwritingsurface• 1691QuartzDesignerFabricbulletinboardinsidedoors(other
fabricsandcolorsoptional)• Concealedhangersforeasyandsecureinstallation• Lectureunits3-3/4”deep;credenzas16”deepCredenza Features:• RadiusCorners• TwoShelves• RecessedToeSpace• HingedDoors;ballcatches;woodendoorknobsAccessories:• 1whitesketchingpad• 4LCSmarkersand1eraser• DisplayRailwithcorkinsert• SpringcliphooksforchartsOptions:• MatteWhiteprojectionscreen• FluorescentLight• LCSinsidedoorsinlieuofbulletinboard• Laminatelectureunitswithsquarecorners• LockandKeysNote:4’Credenzashavetwodoors,6’Credenzashavethree.
LectureUnit Credenza Size TypeWoodandFinish508-4WN 604-4WN 4’ Walnutnaturallacquer508-4WO 604-4WO 4’ Walnutwithoil508-6WN 604-6WN 6’ Walnutnaturallacquer508-6WO 604-6WO 6’ Walnutwithoil509-4N 602-4N 4’ Oaknaturallacquer509-4M 602-4M 4’ Oakmediumfinish509-4D 602-4D 4’ Oakdarkfinish509-6N 602-6N 6’ Oaknaturallacquer509-6M 602-6M 6’ Oakmediumfinish509-6D 602-6D 6’ Oakdarkfinish512-4MS 603-4MS 4’ Mahoganystained512-6MS 603-6MS 6’ Mahoganystained516-4MA 616-4MA 4’ Maplewithnaturalfinish516-6MA 616-6MA 6’ Maplewithnaturalfinish517-4CH 617-4CH 4’ Cherrywithstain517-6CH 617-6CH 6’ Cherrywithstain518-4PL 4’ PlasticLaminate518-6PL 6’ PlasticLaminate
Conference Room Chalkboards, Markerboards, Tackboards and Combination Units• 2”darkfinishoakframewithblackaccentstrip(naturalormedium
oakatnoadditionalcost)• LCSmarkerboardorVitracitechalkboardwritingsurface• Markerboards,Chalkboards,andCombinationunitshavemarkertray• TackboardsareavailablewithClaridgeCork,Fabricork,Designer
Fabric,Hook-FabandTanNucork
• Combinationunitsavailablewithanyoftheabovematerials
• Keyholehangersfurnished
Options:• Genuinewalnut,
mahogany,mapleorcherryoptional
• Maprailoptional• Custommatchfinishes
Wood FinishesWood finish color samples are reproduced withreasonableaccuracy.Ifmatchiscriticalcallorwriteforactualsamples.Custommatchfinishesoptional.
Chalkboard/ SizeMarkerboard Tackboard Combination (H-W)210 213 210E 4’x4’210A 213A 210F 4’x6’210B 213B 210G 4’x8’210C 213C 210H 4’x10’210D 213D 210K 4’x12’
Natural Oak Medium Oak Dark Oak
Ebony Walnut Natural Walnut Oil
Mahogany Stain Maple Natural Cherry Stain
10 11 00/CLCBuyLine 3119
No. 604-4WN Credenza with matching
No. 508-4WN Lecture Unit. Both are walnut
with natural finish.
No. 210E
11ClaridgeProductsandEquipment,Inc.•Phone:800-434-4610•Fax:870-743-1908
No. 517-4CH
Specification Information
gEnERALDESCRIPTIONOFWORK
Section Includes:
1. Porcelainenamelchalkboards2. Porcelainenamelmarkerboards3. Tackboardsandaccessories4. MarkerWallsandTackWalls5. VerticalandHorizontalslidingunits
Related Sections:
1.Directories2.DisplayCasework
REFEREnCED STAnDARDS
A. ASTM-E84B. ASTMB221
SUBMITTALS
A. ShopDrawings:Provideshopdrawingsforeachtypeofvisualdisplayboardrequired.
B. ProductData:Providetechnicaldataformaterialsspecified.IncludeMaterialSafetyDataSheets,whenapplicable.
C. Samples:1. Manufacturer’scolorcharts2. Compositionsamplesofface,core,
backingmaterialandtrimtoillustratefinish,colorandtexture.
OPERATIOn & MAInTEnAnCE
Includedataonregularcleaning,stainremoval,andprecautions
REgULATORY REQUIREMEnTS
Conformtoapplicablecodeforflame/smokeratingintackboardsinaccordancewithASTM-E84.
QUALITY ASSURAnCE
Provideitemsinthissectionasmanufacturedby:ClaridgeProductsandEquipment,Inc.Harrison,Arkansas72602-0910Phone:870/743-2200Fax:870/743-1908
FIELD COnDITIOnS
Fieldmeasurepriortopreparationofshopdrawingsandfabricationtoensureproperfit.
WARRAnTY
Submit“LifeoftheBuilding”warranty,statingthatundernormalusageandmaintenance,andwheninstalledinaccordancewithmanufacturer’sinstructionsandrecommendations,Claridgeporcelainenamelsteelchalkboardsandmarkerboardsareguaranteedforthelifeofthebuilding.Guaranteecoversreplacementofdefectiveboardsbutdoesnotincluderemovalorreinstallationcost.
PRODUCTSMAnUFACTURERS
Visualdisplayboards-chalkboards,markerboards,andtackboards-asmanufacturedby:ClaridgeProducts&Equipment,Inc.,Harrison,Arkansas72602
MATERIALS
A. AllvisualdisplayboardsshallbeSeries____(architecttoselectfromSeries1,3,4,5,8or185)factorylaminatedandfactoryframedchalkboards,markerboardsortackboards.
B. PorcelainenamelMarkerboards/Chalkboards:AllporcelainenamelmarkerboardsandchalkboardsshallbemanufacturedinaccordancewiththePorcelainEnamelInstitute’sspecifications.Thesteelsurfaceispre-cleanedtoensurecompletebondbetweenthesteelandtheporcelainsurface.1. LCSMarkerboardandVitracite
Chalkboard:Madefromaluminizedsteelsheets,theporcelainenamelsurfaceisfusionbondedtoonesideduringasingleprocessandisfiredatlowestpossibletemperaturetoreducesteelandporcelainstressesandachievesuperiorenamelbondandhardness.
2. LCS-IIMarkerboard:Madefromcold-rolledsteel,duringa3-coatprocessbothsteelsurfacesreceiveagroundcoatofporcelainenamel.Then,acolorcovercoatofporcelainisappliedtoone
surfaceofthegroundcoatandisfusionbondedtothesteelsubstrateattemperaturenecessarytoreducesteelandporcelainstresses.a. FaceSheet:LCS,LCS-IIorVitraciteb. CoreMaterial:7/16”MediumDensity
Fiberboard(MDF)c. Backing:Moisturebarrierback
3. Laminations:Shallbehot-typeneoprenecontactadhesiveappliedtobothsurfacesautomatically.Eachsubstratetohaveminimumof80%coveringwith1.5-2.0drymilsofadhesive.Panelcomponentsshallhaveuniformpressureappliedmechanicallyoverentirearea.Laminationsshallbemadebyfacesheetmanufacturer.
4. Sizes:Standardheightis4feet.Porcelainmarkerboardsandchalkboardsshallbeavailableinsinglepiecelengthsupto16feet.
C. Tackboards:Architecttoselectfromtackboardscomposedof1/4”thickself-healing,burlapbackedClaridgecork;Fabricorkvinylfabriconcorkunderlay;Hook-Fabfabriconcorkunderlay;Designerpolyesterfabriconcorkunderlay;or1/4”TanNucork,allon1/4”hardboardbacking.
D. MetalTrimandAccessories:ProvideSeries____aluminumextrusionsasmanufacturedbyClaridgeProductsandEquipment,Inc.TrimshallbeheavygaugeextrudedaluminumandshallmeetorexceedASTMB221AlloyStandards.Finishtobeetchedandanodizedsatinfinishstandard.ColorAnodizedandPowderCoatPaintfinishedtrimoptional.
Chalktray/MarkerTray:Standardcontinuous,solidtypealuminumChalkTray/MarkerTraywithribbedsectionandinjectionmoldedendclosures,orstandardcontinuoushollowtraywithinjectionmoldedendclosures;metalendclosuresoptional.
MapRail:Standardcontinuous1”(2”optional)maprailwithcorkinsertandendstopsatthetopofeachchalkboardormarkerboard,completewiththefollowingaccessories:1. MapHooks:Provide2maphooksfor
each4feetofmaprail.2. RollerBrackets:Provide____permap
rail.3. FlagHolder:Provide____permaprail.
E. Colors:Asselectedfrommanufacturer’sstandardcolors.Colorchartsonrequest.
F. Adhesive:Asrecommendedbymanufacturer.
FABRICATIOn
A. Shopassembly:Providefactoryassembledchalkboard,markerboard,andtackboardunits,exceptwherefieldassembledunitsarerequired.1. LCSorLCS-IIPorcelainEnamelSteel
MarkerboardsorVitracitePorcelainEnamelSteelChalkboards
a.FaceSheet:PorcelainEnamelSteel b.Core:7/16”MDF c.Backing:Moisturebarrierback2. ClaridgeCorkTackboards a.FaceSheet:1/4”cork b.Binder:burlap c.Backing:1/4”hardboard
EXECUTIOnPROJECT COnDITIOnS
A. Verifybeforeinstallationthatinteriormoistureandtemperatureapproximatenormaloccupiedconditions.
B. Verifythatwallsurfacesarepreparedandreadytoreceiveboards.
InSTALLATIOn
A. Deliverfactorybuiltunitscompletelyassembledinonepiecewithoutjointswhereverpossible.Wheredimensionsexceedpanelsize,provide2ormorepiecesofequallengthasacceptableatthefactory,
disassemblefordelivery,andmakefinaljointsatthejobsite.UseH-baratjointstomaintainalignment.
B. Followmanufacturer’sinstructionsforstorageandhandlingofunitsbeforeinstallation.
C. Installlevelandplumb,keepingperimetertrimstraightinaccordancewithmanufacturer’srecommendations.
ADJUST AnD CLEAn
A. Verifythatallrequiredaccessoriesareinstalledforeachunit.
B. Atcompletionofwork,cleansurfacesand
triminaccordancewithmanufacturer’srecommendations,leavingallmaterialsreadyforuse.
Seewww.claridgeproducts.comforcompletespecificationsandCADlibrary.
12 Copyright©2008ClaridgeProductsandEquipment,Incorporated.PrintedinUSA.Wereservetherighttomakechangeswithoutnotice.
top related