ccna voice from networkers
Post on 11-Apr-2015
732 Views
Preview:
TRANSCRIPT
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
1
© 2008 Cisco Systems, Inc. All rights reserved. Cisco PublicBRKCRT 1106IIUC Exam Prep 2
BRKCRT-1106
CCNA Voice: A New Associate Level Certification
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
2
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 3BRKCRT-110614362_04_2008_c2
Agenda
Preparing for the IIUC ExamUnderstanding Traditional Telephony and VoIPImplementing the Cisco Smart Business Communications SystemImplementing Cisco Unified Communications Manager ExpressImplementing Cisco Unity ExpressQ&A
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 4BRKCRT-110614362_04_2008_c2
What we will coverImpossible to cover all topics for IIUC in two hour sessionSession is about “How to Prepare for the IIUC Exam”, not about “Covering all IIUC knowledge in two hours”Will provide:
SuggestionsResourcesSome sample questions
We will cover practice exam tasks in a few of the key topic areas:
Understanding Traditional Telephony and VoIP
Implementing Cisco Smart Business Communications SystemImplementing Cisco Unified Communications Manager ExpressImplementing Cisco Unity Express
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
3
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 5BRKCRT-110614362_04_2008_c2
Disclaimer
We may not be able to address your specific question
If you have taken the exam please refrain from asking questions from the exam
We will be available after the session to direct you to resources to assist with specific questions or to provide clarification
This session will strictly adhere to the Cisco’s Rules of Confidentiality
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 6BRKCRT-110614362_04_2008_c2
Topics Covered in IIUCDescribe the components of the Cisco Unified Communications Architecture
Describe the function of the infrastructure in a UC environment Describe the function of endpoints in a UC environment Describe the function of the call processing agent in a UC environment Describe the function of messaging in a UC environment Describe the function of auto attendants and IVRs in a UC environment Describe the function of contact center in a UC environment Describe the applications available in the UC environment, including mobility, Presence, and Telepresence Describe how the Unified Communications components work together to create the Cisco Unified Communications Architecture
Describe PSTN components and technologies Describe the services provided by the PSTN Describe time division and statistical multiplexing Describe supervisory, informational, and address signalling Describe numbering plans Describe analog circuits Describe digital voice circuits Describe PBX, trunk lines, key-systems, and tie lines
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
4
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 7BRKCRT-110614362_04_2008_c2
Topics Covered in IIUC cont.
Describe VoIP components and technologiesDescribe the process of voice packetization Describe RTP and RTCP Describe the function of and differences between codecs Describe H.323, MGCP, SIP, and SCCP signalling protocols
Describe and configure gateways, voice ports, and dial peers to connect to the PSTN and service provider networks
Describe the function and application of a dial plan Describe the function and application of voice gateways Describe the function and application of voice ports in a gatewayDescribe the function and operation of call-legs Describe and configure voice dial peers Describe the differences between PSTN and Internet Telephony Service Provider circuits
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 8BRKCRT-110614362_04_2008_c2
Topics Covered in IIUC cont.
Describe and configure a Cisco network to support VoIPDescribe the purpose of VLANs in a VoIP environment Describe the environmental considerations to support VoIP Configure switched infrastructure to support voice and data VLANs Describe the purpose and operation of PoE Identify the factors that impact voice quality Describe how QoS addresses voice quality issues Identify where QoS is deployed in the UC infrastructure
Implement UC 500 using Cisco Configuration Assistant Describe the function and operation of Cisco Configuration Assistant Configure UC 500 device parameters Configure UC 500 network parameters Configure UC 500 dial plan and voicemail parameters Configure UC 500 SIP trunk parameters Configure UC 500 voice system features Configure UC 500 user parameters
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
5
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 9BRKCRT-110614362_04_2008_c2
Topics Covered in IIUC cont.Implement Cisco Unified Communications Manager Express to support endpoints using CLI
Describe the appropriate software components needed to support endpoints Describe the requirements and correct settings for DHCP, NTP, and TFTP Configure DHCP, NTP and TFTP Describe the differences between key system and PBX mode Describe the differences between the different types of ephones and ephone-dns Configure Cisco Unified Communications Manager Express endpointsConfigure call-transfer per design specifications Configure voice productivity features, including hunt groups, call park, call pickup, paging groups, and paging/intercom Configure Music on Hold
Implement voicemail features using Cisco Unity Express Describe the Cisco Unity Express hardware platforms Configure the foundational elements required for Cisco Unified Communications Manager Express to support Cisco Unity Express Describe the features available in Cisco Unity Express Configure AutoAttendant services using Cisco Unity Express Configure basic voicemail features using Cisco Unity Express
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 10BRKCRT-110614362_04_2008_c2
Topics Covered in IIUC cont.
Perform basic maintenance and operations tasks to support the VoIP solution
Describe basic troubleshooting methods for Cisco Unified Communications Manager Express
Explain basic troubleshooting methods for Cisco Unity Express
Explain basic maintenance and troubleshooting methods for UC 500
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
6
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 11BRKCRT-110614362_04_2008_c2
Exam Task Formats
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 12BRKCRT-110614362_04_2008_c2
Exam Taking Tips
Eliminate nonsense options
Look for the “best” answer
Look for subtleties
Make an intelligent guess
Use a time budget. Do not spend too much time on one question
Practical Tips on Taking Multiple Choice Exams
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
7
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 13BRKCRT-110614362_04_2008_c2
Exam Format
Question formatsDeclarative
Procedural
Drag and drop
Complex procedural
Avoided question formatsMemorization of command syntax or interface/menus
“Trick questions”
Version dependencies (platform dependencies are not avoided, i.e., configure Cisco IOS vs. Cisco Cat IOS)
Test Practical Implementation Skills
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 14BRKCRT-110614362_04_2008_c2
Exam Format: Declarative
Which OSI model layer provides the connectionless protocol used for VoIP?
A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 6
A Declarative Exam Task Tests Simple Recall of Pertinent Facts
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
8
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 15BRKCRT-110614362_04_2008_c2
Exam Format: ProceduralA Procedural Exam Task Tests the Ability to Apply Knowledge to Solve a Given IssueRefer to the figure. Which would you recommend for a customer interaction management solution that will provide for 10 to 300 agents?
A. Cisco Unified Contact Center Express
B. Cisco Unified Contact Center Enterprise
C. Cisco Unified Contact Center Hosted
D. Cisco Unified IP Contact Center
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 16BRKCRT-110614362_04_2008_c2
Exam Format Procedural Figure
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
9
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 17BRKCRT-110614362_04_2008_c2
Exam Format: Drag and DropA Drag and Drop Exam Task Tests the Ability to Relate ConceptsClick and drag the characteristic on the left to the Voice Protocol to which it applies.
Point to Point
Text Based
Peer to Peer
Packet Based
H.323
SIP
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 18BRKCRT-110614362_04_2008_c2
Exam Format
A complex procedural exam task test the ability to apply multiple knowledge points to solve an issue
Complex Procedural
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
10
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 19BRKCRT-110614362_04_2008_c2
Section1:Understanding Traditional and VoIP Telephony
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 20BRKCRT-110614362_04_2008_c2
Practice Task
Which port type is typically used to connect to an analog circuit from the PSTN?
A. FXSB. T1/E1 CASC. FXOD. T1/E1 PRI
Analog and Digital Circuits
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
11
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 21BRKCRT-110614362_04_2008_c2
Which port type is typically used to connect to an analog circuit from the PSTN?
A. FXS
B. T1/E1 CAS
C. FXO
D. T1/E1 PRI
Practice Task Analog and Digital Circuits
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 22BRKCRT-110614362_04_2008_c2
Practice Task
Which channel(s) are used for signaling on an E1 PRI?
A. Time slot 1
B. Time slot 17
C. Time slots 1 and 17
D. Time slot 32
E. Time slots 17 and 32
Analog and Digital Circuits
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
12
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 23BRKCRT-110614362_04_2008_c2
Which channel(s) are used for signaling on an E1 PRI?
A. Time slot 1
B. Time slot 17
C. Time slots 1 and 17
D. Time slot 32
E. Time slots 17 and 32
Practice TaskAnalog and Digital Circuits
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 24BRKCRT-110614362_04_2008_c2
Practice Task
Drag the characteristic on the left to the type of circuit on the right; some may be used more than once.
T1 CAS
Up to 24 channels for voice
16 frames are grouped together to make a multiframe
E1 PRI
One channel for signaling
ESF groups together 24 frames
1 sample per channel per frame
Analog and Digital Circuits
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
13
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 25BRKCRT-110614362_04_2008_c2
Practice Task
Drag the characteristic on the left to the type of circuit on the right; some may be used more than once.
T1 CAS
Up to 24 channels for voice
16 frames are grouped together to make a multiframe
E1 PRI
One channel for signaling
ESF groups together 24 frames
1 sample per channel per frame
1 sample per channel per frame
Analog and Digital Circuits
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 26BRKCRT-110614362_04_2008_c2
Practice Task
What is the combined header overhead for a voice packet with RTP/UDP/IP and Ethernet headers without using cRTP?
A. 18 bytes
B. 20 bytes
C. 22 bytes
D. 40 bytes
E. 46 bytes
F. 58 bytes
DSPs and CODECs
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
14
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 27BRKCRT-110614362_04_2008_c2
What is the combined header overhead for a voice packet with RTP/UDP/IP and Ethernet headers without using cRTP?
A. 18 bytes
B. 20 bytes
C. 22 bytes
D. 40 bytes
E. 46 bytes
F. 58 bytes
Practice TaskDSPs and CODECs
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 28BRKCRT-110614362_04_2008_c2
Practice Task
Which two identify the function and components of a gateway? (Choose two.)
A. Functions exclusively in client-server voice networks.
B. May function as an analog-to-digital or digital-to-analog device.
C. A different gateway type is required for client-server and peer-to-peer networks.
D. Translates between different networks.
E. Requires DSP resources to support translation.
Gateways
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
15
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 29BRKCRT-110614362_04_2008_c2
Practice TaskGateways
Which two identify the function and components of a gateway? (Choose two.)
A. Functions exclusively in client-server voice networks.
B. May function as an analog-to-digital or digital-to-analog device.
C. A different gateway type is required for client-server and peer-to-peer networks.
D. Translates between different networks.
E. Requires DSP resources to support translation.
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 30BRKCRT-110614362_04_2008_c2
Section 2 Implementing the Cisco Smart Business Communications System
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
16
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 31BRKCRT-110614362_04_2008_c2
The Cisco Unified Communications 500 Series for Small BusinessThe key component of the Cisco Smart Business Communications System is the Cisco Unified Communications 500 Series for Small Business.The Cisco Unified Communications 500 Series for Small Business includes:
Call processing based on Cisco Unified Communications Manager Express 4.2Voice mail and auto-attendant provided using Cisco Unity Express 2.3.4 Support for full portfolio of Cisco Unified IP phonesLAN switching with built-in or expansion switchesFirewall and VPN capabilitiesCisco data routingH.323 and SIP protocol supportCisco Configuration AssistantCisco Smart Assist default configuration preconfigured for voice, data, and mobilityWireless LAN support using built-in or external AP (optional)
8- or 16-User Desktop Models
32- or 48-User Models
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 32BRKCRT-110614362_04_2008_c2
Cisco Unified Communications 500 Series for Small Business
MOH
10.5” wide, 11.05” deep, 1.5 RU tall (2.625”)
Wi-Fi (optional)
Console PoE (8) WANPort
ExpansionPort
2 x BRI FXS (4)VIC Slot
(field expansion)
FXO (4)
ModelUC520-8U-2BRI-K9
ModelUC520-8U-4FXO-K9
8- or 16-User Models
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
17
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 33BRKCRT-110614362_04_2008_c2
Telephony FeaturesPBX mode or keyswitch modeSystem features
LanguageDate formatSystem messageSystem speed dials
Network featuresVoice VLANDHCP scope settingsIP addressing
SIP trunk settingsDial plan settings
Extension lengthOutgoing call handlingIncoming call handling
Voice-mail featuresVoice-mail pilot numbersAuto-attendant
Voice featuresMOHPagingIntercomHunt GroupCall PickupCaller ID BlockingCall blockingCall ParkConferencing
UsersNameAssociation with a device
PhoneMAC addressExtension number(s)PermissionsCall Forward settings
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 34BRKCRT-110614362_04_2008_c2
Cisco Configuration AssistantIs a GUI tool used to deploy, configure, maintain, and monitor the following aspects of Cisco Smart Business Communications Systems:
SwitchingTelephonyWirelessSecurityNetwork servicesInternet connectivity
Is a Windows-based applicationRequires IP connectivity to functionProvides an interactive topology view
Drag and drop upgrades of software, firmware, and language files
Provides a front panel view
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
18
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 35BRKCRT-110614362_04_2008_c2
Demonstration of Configuring UC-520
1. Verify autoconfiguration of two IP phones2. Configure an Internet connection – IP address 10.1.10.100/24
Default Gateway 10.1.10.13. Verify the Data and Voice VLAN settings – Data VLAN 10, Voice VLAN
1004. Configure Users and Passwords – Username: admin, Password: cisco5. Configure an NTP server – IP address: 172.16.1.16. Configure a System Message – Your current options 7. Configure dial plan to support E9118. Configure Date and Time Format – Date YY/MM/DD Time: 24-hour
format
We Are Going to Verify Some of the Default Settings and Add Some Basic Configuration to a UC-520
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 36BRKCRT-110614362_04_2008_c2
Section 3 –Implementing Cisco Unified Communications Manager Express
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
19
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 37BRKCRT-110614362_04_2008_c2
Practice Task
You have a customer that is interested in deploying a Unified Communications network to replace their existing PBX. They have a LAN that is using a registered IP address range that do not have enough free IP addresses to support both a data and voice network. You want to make a point of discussing voice VLANs withyour customer, what characteristics do you need to emphasize? (Choose three.) A. The voice VLAN when combined with a data VLAN separate the
voice and data trafficB. A voice VLAN allows RFC 1918 to be used for voice network addressing
preserving the registered IP address space.C. It simplifies QoS configurationD. Requires separate network connections for the data and voice networks.E. Requires separate switches to support the data and voice VLANs.F. A voice VLAN reduces spanning tree overhead.
VLAN Configuration
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 38BRKCRT-110614362_04_2008_c2
You have a customer that is interested in deploying a Unified Communications network to replace their existing PBX. They have a LAN that is using a registered IP address range that do not have enough free IP addresses to support both a data and voice network. You want to make a point of discussing voice VLANs withyour customer, what characteristics do you need to emphasize? (Choose three.) A. The voice VLAN when combined with a data VLAN separate the
voice and data trafficB. A voice VLAN allows RFC 1918 to be used for voice network addressing
preserving the registered IP address space.C. It simplifies QoS configurationD. Requires separate network connections for the data and voice networks.E. Requires separate switches to support the data and voice VLANs.F. A voice VLAN reduces spanning tree overhead.
Practice Task – VLAN Configuration
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
20
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 39BRKCRT-110614362_04_2008_c2
Practice Task
Drag the steps in the IP phone bootup process on the left and place them in the correct order on the right.
1.The phone uses Cisco Discovery Protocol to learn the voice VLAN.
The phone initializes the IP stack.
The IP phone powers on.
The phone performs a POST.
The phone boots.
2.
3.
5.
4.
Phone Bootup Process
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 40BRKCRT-110614362_04_2008_c2
Practice Task
Drag the steps in the IP phone bootup process on the left and place them in the correct order on the right.
1.
The phone uses Cisco Discovery Protocol to learn the voice VLAN.
The phone initializes the IP stack.
The IP phone powers on.
The phone performs a POST.
The phone boots.
2.
3.
5.
4.
Phone Bootup Process
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
21
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 41BRKCRT-110614362_04_2008_c2
Practice Task
What is the point of using the ip dhcp excluded-address command?A. It provides a method of having DHCP serve the same IP
address to the same device every time. B. It removes addresses from the DHCP subnet so they can be
used for other devices that require static addresses like servers or gateways
C. It provides a method of having DHCP serve up addresses reserved for servers and gateways
D. It provides a method of removing IP addresses reserved for data VLANs.
DHCP
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 42BRKCRT-110614362_04_2008_c2
What is the point of using the ip dhcp excluded-addresscommand? A. It provides a method of having DHCP serve the same IP
address to the same device every time. B. It removes addresses from the DHCP subnet so they can be
used for other devices that require static addresses like servers or gateways.
C. It provides a method of having DHCP serve up addresses reserved for servers and gateways.
D. It provides a method of removing IP addresses reserved for data VLANs.
Practice TaskDHCP
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
22
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 43BRKCRT-110614362_04_2008_c2
CMERouter1# show running-configuration!!ip dhcp excluded-address 10.1.10.1 10.1.10.10ip dhcp excluded-address 10.1.10.11 10.1.10.254ip dhcp excluded-address 10.1.110.1 10.1.110.10ip dhcp excluded-address 10.1.110.11 10.1.110.2540ip dhcp pool Datanetwork 10.1.10.0 255.255.255.0default-gateway 10.1.10.1!ip dhcp pool Voicenetwork 10.1.110.0 255.255.255.0default-gateway 10.1.110.1Option 150 ip 10.1.110.1!
Practice Task
Refer to the exhibit. You have configured a DHCP pool for the 10 IP phones on your network. The phones are not receiving IP addresses. What is the problem?A. The default gateway has the wrong IP addressB. The option 150 command is missingC. The subnet overlaps with the data VLAND. The ip excluded-address range won’t allow any IP addresses to be deployed.
DHCP
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 44BRKCRT-110614362_04_2008_c2
Refer to the exhibit. You have configured a DHCP pool for the 10 IP phones on your network. The phones are not receiving IP addresses. What is the problem?A. The default gateway has the wrong IP addressB. The option 150 command is missingC. The subnet overlaps with the data VLAND. The ip excluded-address range won’t allow any IP addresses to be deployed.
Practice Task
CMERouter1# show running-configuration!!ip dhcp excluded-address 10.1.10.1 10.1.10.10ip dhcp excluded-address 10.1.10.11 10.1.10.254ip dhcp excluded-address 10.1.110.1 10.1.110.10ip dhcp excluded-address 10.1.110.11 10.1.110.254!ip dhcp pool Datanetwork 10.1.10.0 255.255.255.0default-gateway 10.1.10.1!ip dhcp pool Voicenetwork 10.1.110.0 255.255.255.0default-gateway 10.1.110.1Option 150 ip 10.1.110.1!
DHCP
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
23
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 45BRKCRT-110614362_04_2008_c2
Practice Task
Refer to the exhibit. You have configured a DHCP pool for the 10IP phones on your network. The phones are receiving IP addresses, but are not getting the configuration files from the Cisco Unified Communications Manager Express. What is the problem?A. The default gateway has the wrong IP addressB. The option 150 command is missingC. The subnet overlaps with the data VLAND. The ip excluded-address range is won’t allow any IP addresses to be deployed.
CMERouter1# show running-configuration!!ip dhcp excluded-address 10.1.10.1 10.1.10.10ip dhcp excluded-address 10.1.10.21 10.1.10.254ip dhcp excluded-address 10.1.110.1 10.1.110.10ip dhcp excluded-address 10.1.110.21 10.1.110.254!ip dhcp pool Datanetwork 10.1.10.0 255.255.255.0default-gateway 10.1.10.1!ip dhcp pool Voicenetwork 10.1.110.0 255.255.255.0default-gateway 10.1.110.1
DHCP
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 46BRKCRT-110614362_04_2008_c2
Practice Task
CMERouter1# show running-configuration!!ip dhcp excluded-address 10.1.10.1 10.1.10.10ip dhcp excluded-address 10.1.10.21 10.1.10.254ip dhcp excluded-address 10.1.110.1 10.1.110.10ip dhcp excluded-address 10.1.110.21 10.1.110.254!ip dhcp pool Datanetwork 10.1.10.0 255.255.255.0default-gateway 10.1.10.1!ip dhcp pool Voicenetwork 10.1.110.0 255.255.255.0default-gateway 10.1.110.1
DHCP
Refer to the exhibit. You have configured a DHCP pool for the 10 IP phones on your network. The phones are receiving IP addresses, but are not getting the configuration files from the Cisco Unified Communications Manager Express. What is the problem?A. The default gateway has the wrong IP addressB. The option 150 command is missingC. The subnet overlaps with the data VLAND. The ip excluded-address range is won’t allow any IP addresses to be deployed.
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
24
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 47BRKCRT-110614362_04_2008_c2
Practice TaskRefer to the exhibit. Drag the correct configuration commands on the left into the router configuration on the right to configure three ephone-dns starting with extension 2000. Each ephone-dn must allow consultative transfer. Add the configured ephone-dns to the ephone 1 configuration so that button one has the lowest extension number and button 2 supports an overlay with call waiting. Not all options will apply.
MAC 000F.2470.F8F8
!
!
!ephone 1
button 1:1 2o2 3ephone-dn 1 dual-line
mac-address 000f.2470.f8f8button 1:1 2c2 3number 2000ephone-dn 3 dual-line
number 2001
number 2002ephone-dn 2 dual-line
ephone-dn 1
ephone-dn 2ephone-dn 3
Ephone-dn and Ephone Configuration
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 48BRKCRT-110614362_04_2008_c2
Practice TaskRefer to the exhibit. Drag the correct configuration commands on the left into the router configuration on the right to configure three ephone-dns starting with extension 2000. Each ephone-dn must allow consultative transfer. Add the configured ephone-dns to the ephone 1 configuration so that button one has the lowest extension number and button 2 supports an overlay with call waiting. Not all options will apply.
MAC 000F.2470.F8F8
ephone-dn 1 dual-linenumber 2000!ephone-dn 2 dual-linenumber 2001!ephone-dn 3 dual-line number 2002!ephone 1mac-address 000f.2470.f8f8button 1:1 2c2 3
button 1:1 2o2 3ephone-dn 1
ephone-dn 2ephone-dn 3
Ephone-dn and Ephone Configuration
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
25
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 49BRKCRT-110614362_04_2008_c2
Practice Task
Refer to the exhibit. If a third call is placed to extension 1004, how will the call be treated?
A. The call will ring on the second channel on Ephone 5.
B. The call will ring on the second channel on both Ephones 4 and 5.
C. The call will ring on the second channel of Ephone 4
D. The call will receive a busy tone because both ephone-dns are busy.
Hunt Groups1004 on Line Button 2
1004 on Line Button 2
Ephone 4
Ephone 5
Button 2 preference 0 huntstop channel
1004
1004
Button 2 preference 1 huntstop channel
1004
1004
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 50BRKCRT-110614362_04_2008_c2
Practice Task
Refer to the exhibit. If a third call is placed to extension 1004, how will the call be treated?
A. The call will ring on the second channel on Ephone 5.
B. The call will ring on the second channel on both Ephones 4 and 5.
C. The call will ring on the second channel of Ephone 4
D. The call will receive a busy tone because both ephone-dns are busy.
1004 on Line Button 2
1004 on Line Button 2
Ephone 4
Ephone 5
Button 2 preference 0 huntstop channel
1004
1004
Button 2 preference 1 huntstop channel
1004
1004
Hunt Groups
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
26
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 51BRKCRT-110614362_04_2008_c2
Practice Task
A. 100 Mb/sB. 10 Mb/sC. 512 kb/sD. 256 kb/s
QoS Configuration
IP IP IP IP
10 Mb/s256 kb/s 512 kb/s
100 Mb/s
Refer to the exhibit. What is the maximum bandwidth available to packets going from the PC to the server?
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 52BRKCRT-110614362_04_2008_c2
A. 100 Mb/sB. 10 Mb/sC. 512 kb/sD. 256 kb/s
Practice Task
IP IP IP IP
10 Mb/s256 kb/s 512 kb/s
100 Mb/s
Refer to the exhibit. What is the maximum bandwidth available to packets going from the PC to the server?
QoS Configuration
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
27
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 53BRKCRT-110614362_04_2008_c2
Practice Task
Drag the characteristic on the left to the traffic type on the right; some may be used more than once.
Voice
Data
Video
Delay-insensitive
TCP retransmits
Smooth
Bursty
Smooth or Bursty
Greedy
UDP priority
Benign
QoS Configuration
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 54BRKCRT-110614362_04_2008_c2
Practice Task
Drag the characteristic on the left to the traffic type on the right; some may be used more than once.
Voice
Data
Video
Delay-insensitive
TCP retransmits
Smooth
Bursty
Smooth or Bursty
Greedy
UDP priority
Benign
UDP priority
QoS Configuration
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
28
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 55BRKCRT-110614362_04_2008_c2
Practice Task
Which of the following single dial peers will support using an access code of 9 and support local, long distance and international dialing?
Dial Peer Configuration
A. dial-peer voice 9 potsdestination-pattern 9.port 1/0/0
B. dial-peer voice 9 potsdestination-pattern 9Tport 1/0/0
C. dial-peer voice 9 potsdestination-pattern 9#voice port 1/0/0
D. dial-peer voice 9 potsdestination-pattern 9$port 1/0/0
E. dial-peer voice 9 potsdestination-pattern 9%port 1/0/0
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 56BRKCRT-110614362_04_2008_c2
Practice Task
A. dial-peer voice 9 potsdestination-pattern 9.port 1/0/0
B. dial-peer voice 9 potsdestination-pattern 9Tport 1/0/0
C. dial-peer voice 9 potsdestination-pattern 9#voice port 1/0/0
D. dial-peer voice 9 potsdestination-pattern 9$port 1/0/0
E. dial-peer voice 9 potsdestination-pattern 9%port 1/0/0
Dial Peer ConfigurationWhich of the following single dial peers will support using an access code of 9 and support local, long distance and international dialing?
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
29
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 57BRKCRT-110614362_04_2008_c2
Practice Task
Refer to the exhibit. What digits are forwarded to the PSTN in the following pots dial?
A. 9
B. 911
C. 9911
D. No digits are forwarded
dial-peer voice 9911 potsdestination-pattern 9911port 1/0/0
Dial Peer Configuration
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 58BRKCRT-110614362_04_2008_c2
9
911
9911
No digits are forwarded
dial-peer voice 9911 potsdestination-pattern 9911port 1/0/0
Dial Peer Configuration
Refer to the exhibit. What digits are forwarded to the PSTN in the following pots dial?
Practice Task
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
30
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 59BRKCRT-110614362_04_2008_c2
Section 4 -Implementing Cisco Unity Express
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 60BRKCRT-110614362_04_2008_c2
Practice Task
Refer to the exhibit. You have configured your Cisco Unified Communications Manager Express to support Cisco Unity Express. When you try to use the service-engine service-module 1/0 session command to gain access to the Cisco Unity Express you receive the following error message “IP address needs to be configured on interface Service-Engine1/0”. What needs to be edited or changed to resolve the issue?
A. The service-module ip default-gateway address is incorrect
B. The IP address of the service-engine should be outside the excluded-address rangeC. The IP address of the Service-Engine should be the same a
interface Loopback 0
D. The ip unnumbered Loopback 0 command is missing from interface Service-Engine 1/0
ip dhcp excluded-address 10.19.153.0 10.19.153.10interface Loopback 0
ip address 10.19.153.1 255.255.255.0interface Service-Engine1/0
service-module ip address 10.19.153.2 255.255.255.0service-module ip default-gateway 10.19.153.1
ip route 10.19.153.2 255.255.255.255 service-engine 1/0
Cisco Unity Configuration
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
31
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 61BRKCRT-110614362_04_2008_c2
Refer to the exhibit. You have configured your Cisco Unified Communications Manager Express to support Cisco Unity Express. When you try to use the service-engine service-module 1/0 session command to gain access to the Cisco Unity Express you receive the following error message “IP address needs to be configured on interface Service-Engine1/0”. What needs to be edited or changed to resolve the issue?
A. The service-module ip default-gateway address is incorrect
B. The IP address of the service-engine should be outside the excluded-address rangeC. The IP address of the Service-Engine should be the same a
interface Loopback 0
D. The ip unnumbered Loopback 0 command is missing from interface Service-Engine 1/0
Practice TaskCisco Unity Configurationip dhcp excluded-address 10.19.153.0 10.19.153.10interface Loopback 0
ip address 10.19.153.1 255.255.255.0interface Service-Engine1/0
service-module ip address 10.19.153.2 255.255.255.0service-module ip default-gateway 10.19.153.1
ip route 10.19.153.2 255.255.255.255 service-engine 1/0
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 62BRKCRT-110614362_04_2008_c2
Practice Task
Which of the following are capabilities associated with the TUI for a Cisco Unity Express Administrator? Choose three.)
A. Audio-based interface using the phone
B. Recording of personal greeting
C. Prompt management and recording
D. Alternate emergency, vacation, or holiday greeting
E. Recording spoken name
F. Manager phone setting for associated device
Cisco Unity Express Configuration
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
32
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 63BRKCRT-110614362_04_2008_c2
Practice TaskCisco Unity Express ConfigurationWhich of the following are capabilities associated with the TUI for a Cisco Unity Express Administrator? Choose three.)A. Audio-based interface using the phone
B. Recording of personal greeting
C. Prompt management and recording
D. Alternate emergency, vacation, or holiday greeting
E. Recording spoken name
F. Manager phone setting for associated device
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 64BRKCRT-110614362_04_2008_c2
Practice Task
What are the Cisco IOS router prerequisites for Cisco Unity Express Support? (Choose three.)
A. Create SIP dial peers for directing calls into Cisco Unity Express.
B. Configure NTP settings if the router is the NTP server.
C. Setup IP addressing for the Cisco Unity Express hardware module.
D. Configure a static route to the address of the Cisco Unity Express module.
E. Setup routing and IP addressing on the router.
Cisco Unity Express
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
33
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 65BRKCRT-110614362_04_2008_c2
Practice Task
What are the Cisco IOS router prerequisites for Cisco Unity Express Support? (Choose three.)A. Create SIP dial peers for directing calls into Cisco Unity
Express.
B. Configure NTP settings if the router is the NTP server.
C. Setup IP addressing for the Cisco Unity Express hardware module.
D. Configure a static route to the address of the Cisco Unity Express module.
E. Setup routing and IP addressing on the router.
Cisco Unity Express
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 66BRKCRT-110614362_04_2008_c2
Practice Task
Which Cisco Unified Communications Manager configuration component is associated with MWI on/off?
A. ephones
B. POTS dial peers
C. VoIP dial peers
D. ephone templates
E. ephone-dns
Cisco Unity Express Configuration
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
34
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 67BRKCRT-110614362_04_2008_c2
Which Cisco Unified Communications Manager configuration component is associated with MWI on/off?
A. ephones
B. POTS dial peers
C. VoIP dial peers
D. ephone templates
E. ephone-dns
Practice TaskCisco Unity Express Configuration
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 68BRKCRT-110614362_04_2008_c2
Q and A
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
35
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 69BRKCRT-110614362_04_2008_c2
Recommended Reading
Continue your Cisco Live learning experience with further reading from Cisco Press
Check the Recommended Reading flyer for suggested books
Available Onsite at the Cisco Company Store
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 70BRKCRT-110614362_04_2008_c2
Complete Your Online Session Evaluation
Cisco values your input
Give us your feedback—we read and carefully consider your scores and comments, and incorporate them into the content program year after year
Go to the Internet stations located throughout the Convention Center to complete your session evaluations
Thank you!
© 2006, Cisco Systems, Inc. All rights reserved.14362_04_2008_c2.scr
36
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Public 71BRKCRT-110614362_04_2008_c2
top related