certificate course in tot for electrical sector · 2019-11-08 · iron and plate, fixing bolts,...
Post on 11-May-2020
3 Views
Preview:
TRANSCRIPT
Page | 1 Electrical Sector
Certificate Course in TOT for Electrical Sector
Certificate Course in TOT for Electrical Sector
1. Name and address of submitting body : Instructor Training Centre, ITI
Tarsali Campus, Tarsali, Vadodara. -
390009
2. Name and contact details of individual
dealing with the submission.
Name : Shri R.R.Patel
Position in the organization : Principal (Class – 1)
Address if different from above : Same as above
Tel number(s) : 0265 646678
E-mail address : principal_itc@yahoo.co.in
3. Name of Qualification/Course :
4. NCO code : 7411.0100, 7412.0200, 7137.20
(A55855.10)(Please refer National
Classification of Occupation -2004
available on www.dget.nic.in)
5. Engineering OR Non-engineering : Engineering
6. No. of students per batch : 20
7. Duration in Hours. : 384
8. Duration in Month : 3 Months .
9. Nature and purpose of the qualification : ToT
10. Occupation(s) to which the qualification
gives access : ToT for Supervisor Instructor
11. Job description of the occupation : ToT for Supervisor Instructor
12. Licensing requirements : NO
13. Statutory and Regulatory requirement of : Enhance the Quality of the delivery
the relevant sector (documentary evidence of the training.
to be provided)
14. Level of the qualification in the NSQF
(As per Notification dated 27/12/2013
Of Ministry of finance, New Delhi) : Level 6
15. Progression from the qualification
(Please show Professional and academic
Progression) : To improve training quality as per
industries requirement
Page | 2 Electrical Sector
16. Examination Scheme:
17. Entry qualification for Trainee:
Minimum entry qualification
(Essential):
1. Supervisor Instructor of Electrician
2. Supervisor Instructor of Wireman
3. Supervisor Instructor of Lift And Escalator Mechanic
4. Supervisor Instructor of Armature Motor
Rewinding/Coil Winder
5. Supervisor Instructor of Domestic Home Appliances
Repair
Desirable: Supervisor Instructor of Electrical Group
18. Minimum qualification for Trainer:
Minimum qualification (Essential):
Diploma or Degree Electrical/Electrical & Electronics
Engineering from AICTE recognized Board / University
with five / two years’ experience respectively.
Desirable: Passed National Craft Instructor Training course in
Electrician & Wireman trade.
19. Syllabus Committee Member:
Name of Qualification/Course: Certificate Course in TOT for Electrical Sector
No. Name of Subject
Teaching
Hours
during
full
course.
Maximum
Marks.
(Excluding
Sessional)
Minimum
Marks
required for
Passing
(Excluding
Sessional).
Sessional Marks
if any.
Subject-1 Practical 384 250 150 -
Sr
No. Name Organization Designation
Technical
Qualification
Exp. in
Years
1 Shri A. C.
Muliyana
Directorate of
Employment &
Training,
Gandhinagar.
Deputy Director
(Training),
Gandhinagar
D.A.E.,
D.M.E. 36 Years
2 Shri R.R.Patel ITC Tarsali,
Vadodara Principal Class-I
B.E.
Electronics 25 Years
3 Smt. N. K. Shah ITC Tarsali Principal Class-II D.R.T. /
D.E.R.E. 36 Years
4 Shri M. P. Patel ITI Tarapur Principal Class II DEE, AMIE 16 Years
Page | 3 Electrical Sector
25, 00,000 Reference Year
2018-2019
5.2 K.W.
98Sq. Meter
20. Terminal Skills of trainee: (Should be well defined and having reference to NCO):
1. One can impart practical training to others.
2. Domain specific work like Safety Practices.
3. Electrical circuits laws.
4. Different kind of wirings.
5. Luminaries Practices.
6. Practices on different kinds of measuring instruments
7. Different Kinds of practices like installation, commissioning, fault finding &
rectification of electrical machines.
8. Practices like fault finding & repairing of domestic appliances.
9. Practices of basic electronics circuits & components assembling & testing.
10. Knowledge of conventional & nonconventional power plant.
11. Knowledge of power distribution.
21. Approximate cost of Tools
/ Equipment / Machinery for
Starting one batch of the course :
22. Area required for practical / Workshop for one batch. :
23. Minimum Power connection required :
24.1 No of items in Standard list of Machinery : 23 NOS.
As per Annexure - I:
5
Shri
KamleshBhai
Prajapati
Technology
Exchange Services
Pvt. Ltd.
Managing Director B.E 15 Years
6 Shri Ishan Parekh
Technical Resource
and Planning
Service Pvt. Ltd.
Electrical Engineer D.E.E 05 Years
7 Ku. H.C.Tandel ITC Tarsali Foreman Instructor B.E.E.C 05 Years
8 Shri M. M.
Kolcha
ITI Waghodiya Foreman Instructor DEE 30 Years
9 Ku.K.P.Mistry ITI Maninagar
Foreman Instructor B.Tech EC 06 Years
10 Shri S.V.Kharadi ITI Gandhinagar Foreman Instructor D.M.E. 05 Years
11 Shri D N Jingar ITI Sarkhej Supervisor instructor D.M.E 25Years
12 Ku. J M Banker ITI Maninagar Supervisor instructor DEE 07 Years
13 Shri N L Mansuri
ITI Kubernagar Supervisor instructor ITI 29 Years
14 Shri R. R.
Prajapati ITI Tarapur Supervisor Instructor
B.E.E 05 Years
Page | 4 Electrical Sector
24.1.1. Page NO from 06 to 08
24.2 No of items in Standard list of Shop outfit : 112 NOS.
24.2.1. Page NO from 08 to 12.
24.3 No of items in Standard list of Trainee Toll-Kit : 18 NOS.
24.3.1. Page NO from 12 to 13.
25. Formal structure of the qualification as per Annexure - II: Annexure – II attested
26. Assessment evidences as per Annexure – III : Annexure – III attested
27. Evidence of Level :
Title/Name of qualification/component: Certificate Course in TOT for Electrical Sector
Domain Key requirements of the job role. How the job role
relates to the NSQF
level descriptors
NSQF
Level
Process In Electrical Familiar with different kinds of
electrical machines, tools & Equipment. Able
to perform different kinds of wirings. Able to
Installation, commissioning, operation,
maintenance, fault identification &
rectification of electrical apparatus &
machines. Able to perform single phase &
three phase installation as per IE rules. Able to
perform domestic, industrial & multistory
building wiring. Able to perform planning
electrical job work. Able to rewinding of
motors & domestic appliances. Fault finding &
repairing of domestic appliances. Illumination,
Electronics. Power generation & Distribution.
Job that requires
well developed skill,
with clear choice of
procedures in
familiar context.
6
Professional
knowledge
Plan and organize assigned work and detect &
resolve issues during execution in his own
work area within defined limit. Demonstrate
possible solutions and agree tasks within the
team. Communicate with required clarity and
understand technical English. Sensitive to
environment, self-learning and productivity
Knowledge of facts,
principles, processes
and general
concepts, in a field
of work or study.
6
Professional
skill
Replaces or repairs defective parts. Overhauls
units and reassembles them after cleaning
components and replacing defective parts or
components of electrical apparatus & machine.
Studies drawings to understand specification of
different wiring, parts, fittings or assembles to
be made and their proper functions.
Calculations & estimation of electrical
material, machine, etc.
A range of cognitive
and practical skills
required to
accomplish tasks
and solve problem
by selecting and
applying basic
methods, tools,
materials and
information.
6
Page | 5 Electrical Sector
Domain Key requirements of the job role. How the job role
relates to the NSQF
level descriptors
NSQF
Level
Core skill Communicate with required clarity and
understand technical English. Sensitive to
environment, self-learning and productivity.
Desired
mathematical skill,
understanding of
social, political and
some skill of
collecting and
organizing
information,
communication
6
Responsibility To help people take more responsibility for
their work, provide them with the skill a
resource to actually do their job. Then setup an
environment that makes it easy for them to
change and help them to take responsibility for
their decision and action.
Responsibility for
own work and
Learning and some
responsibility for
other’s works and
learning
6
Page | 6 Electrical Sector
Annexure - I
Standard List of Machinery - Equipment / Shop-outfit / or Trainee Toolkit
Name of Qualification/Course: Certificate Course in TOT for Electrical Sector
Sr.
No.
Description of Item with detailed
specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students
for
Instructor
Total Quantity
Required(Total
of previous two
columns)
1 Pillar Electric Drill Machine 12
mm capacity
Machinery /
Equipment 1No 0 1No
2 Motorized Bench Grinder Machinery /
Equipment 1No 0 1No
3
Used DC Generators-series, shunt
and compound type for
overhauling practice
Machinery /
Equipment
01 No
Each 0 01 No Each
4 D.C. Shunt Generator with control
panel, 2.5 KW, 230 V
Machinery /
Equipment 1No 0 1No
5
D.C. Compound Generator with
control panel including fitted
rheostat, voltmeter, ammeter and
breaker,2.5 KW, 230 V
Machinery /
Equipment 1No 0 1No
6
DC Series Motor coupled with
mechanical load 0.5 to 2 HP,
220Volts
Machinery /
Equipment 1No 0 1No
7 DC Shunt Motor 2 to 3 HP, 220
volts
Machinery /
Equipment 1No 0 1No
8 DC compound Motor with starter
and switch 2 to 3 HP, 220 volts
Machinery /
Equipment 1No 0 1No
9 Single phase Transformer, core
type, air cooled
Machinery /
Equipment 3Nos 0 3Nos
10 Three phase transformer, shell type
oil cooled
Machinery /
Equipment
1No 0
1No
Page | 7 Electrical Sector
No.
Description of Item with detailed
specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students
for
Instructor
Total Quantity
Required(Total
of previous two
columns)
11
Electrical Machine Trainer
Suitable for demonstrating the
construction and functioning of
different types of DC machines
and AC machines (single phase
and three phase).Should be fitted
with friction brake arrangement,
dynamo meter, instrument panel
and power supply unit
Machinery /
Equipment 1No 0 1No
12
Motor-Generator (AC to DC)
consisting of :
Squirrel Cage Induction Motor
with star delta starter and directly
coupled to DC shunt generator and
switch board mounted with
regulator, air breaker, ammeter,
voltmeter, knife blade switches
and fuses, set complete with case
iron and plate,
fixing bolts, foundation bolts and
flexible coupling.
Induction Motor rating:
7 HP, 400V, 50 cycles, 3 phase
DC Shunt Generator rating: 5 KW,
440V
Machinery /
Equipment 1No 0 1No
13
Motor Generator(DC to AC) set
consisting of -
Shunt Motor with starting
compensator and switch directly
coupled to AC generator with
exciter and switch board mounted
with regulator, breaker, ammeter,
voltmeter frequency meter, knife
blade switch and fuses etc. Set
complete with cast iron bed plate,
fixing bolts, foundation bolts and
flexible coupling
Shunt Motor rating :
5 HP, 440V
AC Generator rating :
3-Phase, 4 wire, 3.5 KVA, 400/230
Volts, 0.8 pf, 50cycles
Machinery /
Equipment 1No 0 1No
14
Thyristor /IGBT controlled D.C.
motor drive with Techo -
generator feedback
arrangement. 2 HP
Machinery /
Equipment 1No 0 1No
Page | 8 Electrical Sector
No.
Description of Item with detailed
specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students
for
Instructor
Total Quantity
Required(Total
of previous two
columns)
15
Thyristor /IGBT controlled A.C.
motor drive with VVVF control 3
Phase,
2 HP
Machinery /
Equipment 1No 0 1No
16
Diesel Generator Set with
changeover switch, over current
breaker and
water-cooled with armature, star-
delta connections AC 3 phase, 5
KVA,
230 volt
Machinery /
Equipment 1No 0 1No
17
AC Squirrel Cage Motor with star
delta starter and triple pole iron
clad switch fuse.2 to 3 HP, 3-
phase ,400 volts, 50 cycles
Machinery /
Equipment 2Nos 0 2Nos
18
AC phase-wound slip ring Motor
with starter and switch5 HP, 400
volts, 3-phase, 50 cycles
Machinery /
Equipment 1No 0 1No
19
A.C. Series type Motor with
mechanical load ¼ HP, 230V, 50
cycles
Machinery /
Equipment 1No 0 1No
20
Single Phase Capacitor Motor with
starter switch 1 HP 230 volt 50
cycles
Machinery /
Equipment 1No 0 1No
21
Universal Motor with
starter/switch 230volt, 50 cycles ¼
HP
Machinery /
Equipment 1No 0 1No
22 Stepper Motor with Digital
Controller
Machinery /
Equipment 1No 0 1No
23 Shaded Pole Motor Machinery /
Equipment 1No 0 1No
List of Shop outfit:
Sr.
No.
Description of Item with
detailed specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students for
Instructor
Total
Quantity
Required
(Total of
previous
two
columns)
1 3- point D.C. Starter Shop outfit 2 Nos 0 2 Nos
2 4- point D.C. Starter Shop outfit 2 Nos 0 2 Nos
3 Variable Auto Transformer Shop outfit 1No 0 1No
4 Oscilloscope Dual Trace,30 MHZ Shop outfit 1No 0 1No
Page | 9 Electrical Sector
Sr.
No.
Description of Item with
detailed specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students for
Instructor
Total
Quantity
Required
(Total of
previous
two
columns)
5 Function Generator Shop outfit 1No 0 1No
6 Discrete Component Trainer Shop outfit 1No 0 1No
7 Linear I.C. Trainer Shop outfit 1No 0 1No
8 Digital I.C. Trainer Shop outfit 1 No 0 1 No
9 Bath Impregnating Shop outfit 1 No 0 1 No
10 Oven Stove Shop outfit 1 No 0 1 No
11 Oil Testing Kit Shop outfit 1 No 0 1 No
12 Battery Charger Shop outfit 1 No 0 1 No
13 Hygrometer Shop outfit 1 No 0 1 No
14 C- Clamp 200 mm, 150 mm and
100 mm
Shop outfit 2 Nos
each
0 2 Nos
each
15 Spanner Adjustable 150 mm, 15
degree
Shop outfit 2 Nos 0 2 Nos
16 Blow lamp 0.5 ltr Shop outfit 2Nos 0 2Nos
17 Melting Pot Shop outfit 1No 0 1No
18 Ladle Shop outfit 2Nos 0 2Nos
19 Chisel Cold firmer 25 mm X 200
mm
Shop outfit 2 Nos 0 2 Nos
20 Chisel 25 mm & 6 mm Shop outfit 4 Nos each 0 4 Nos each
21 Hand Drill Machine0 to 6 mm
capacity
Shop outfit 1No 0 1No
22 Allen Key Shop outfit 1 set 0 1 set
23 Oil Can 0.12 ltr Shop outfit 2 Nos 0 2 Nos
24 Grease Gun Shop outfit 1 No 0 1 No
25 Out Side Micrometer 0 to 25 mm Shop outfit 1No 0 1No
26 Portable Electric Drill Machine 6
mm capacity
Shop outfit 1No 0 1No
27 Rawl plug tool & bit Shop outfit 2 set 0 2 set
28 Pulley Puller 3 legs 250 mm
adjustable
Shop outfit 2Nos 0 2Nos
29 Bearing Puller 3 legs 120 mm
flexible
Shop outfit 2Nos 0 2Nos
30 Hydrometer Shop outfit 2 set 0 2 set
31 Thermometer 0 to 100 deg
Centigrade
Shop outfit 1No 0 1No
32 Scissors blade 150 mm Shop outfit 4 Nos 0 4 Nos
33 Crimping Tool Shop outfit 1 set 0 1 set
34 Crimping Tools Heavy duty Shop outfit 2 Nos 0 2 Nos
35 Chisel Cold flat 12 mm Shop outfit 2 No 0 2 No
Page | 10 Electrical Sector
Sr.
No.
Description of Item with
detailed specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students for
Instructor
Total
Quantity
Required
(Total of
previous
two
columns)
36 Mallet hard wood 0.50 kg Shop outfit 4 No 0 4 No
37 Hammer Exeter type 0.40 kg Shop outfit 8 nos 0 8 nos
38 Hacksaw frame 200 mm 300 mm
adjustable
Shop outfit 4 Nos 0 4 Nos
39 Try Square 150 mm blade Shop outfit 4 Nos 0 4 Nos
40 Outside & Inside Divider Caliper Shop outfit 2 Nos each 0 2 Nos each
41 Pliers flat nose 100 mm Shop outfit 4 Nos 0 4 Nos
42 Pliers round nose 100 mm Shop outfit 4 Nos 0 4 Nos
43 Plier longnose150 mm Shop outfit 4 Nos 0 4 Nos
44 Tweezers 100 mm Shop outfit 4 Nos 0 4 Nos
45 Snip Straight & Bent 150 mm Shop outfit 2 Nos each 0 2 Nos each
46 Spanner D.E. metric standard Shop outfit 4 Nos 0 4 Nos
47 Drill hand brace0 to 100 mm Shop outfit 4 Nos 0 4 Nos
48 Drill S.S. Twist block 2 mm, 5
mm 6 mm set of 3
Shop outfit 4 set 0 4 set
49 Plane, smoothing cutters 50 mm Shop outfit 4 Nos. 0 4 Nos.
50 Gauge, wire imperial(SWG) Shop outfit 4 Nos 0 4 Nos
51 File flat 200 mm 2nd cut Shop outfit 8 Nos. 0 8 Nos.
52 File half round 200 mm 2 cut Shop outfit 4 Nos 0 4 Nos
53 File round 200 mm 2 cut Shop outfit 4 Nos. 0 4 Nos.
54 File flat 150 mm rough Shop outfit 4 Nos. 0 4 Nos.
55 File flat 250 mm bastard Shop outfit 4 Nos. 0 4 Nos.
56 File flat 250 mm smooth Shop outfit 4 Nos. 0 4 Nos.
57 File Rasp, half round 200 mm
bastard
Shop outfit 4 Nos. 0 4 Nos.
58 Soldering Iron 25 watt, 65 watt,
125 watt
Shop outfit 4 Nos each 0 4 Nos each
59 Copper bit soldering iron 0.25 kg. Shop outfit 4 Nos. 0 4 Nos.
60 De soldering Gun Shop outfit 4 Nos 0 4 Nos
61 Hand Vice 50 mm jaw Shop outfit 4 Nos 0 4 Nos
62 Table Vice 100 mm jaw Shop outfit 8 Nos. 0 8 Nos.
63 Pipe Cutter to cut pipes upto 5 cm.
dia
Shop outfit 2 Nos. 0 2 Nos.
64 Pipe Cutter to cut pipes above 5
cm dia
Shop outfit 1 No. 0 1 No.
65 Stock and Die set for 20 mm to 50
mm G.I. pipe
Shop outfit 1 No. 0 1 No.
66 Ohm Meter; Series Type & Shunt
Type
Shop outfit 1 No. each 0 1 No. each
Page | 11 Electrical Sector
Sr.
No.
Description of Item with
detailed specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students for
Instructor
Total
Quantity
Required
(Total of
previous
two
columns)
67 Stock and Dies conduit Shop outfit 4 Nos 0 4 Nos
68 Multi Meter (analog) 0 to 1000 M
Ohms, 2.5 to 500 V
Shop outfit 1 No 0 1 No
69 Digital Multi Meter 3 ½ digit Shop outfit 8 Nos 0 8 Nos
70 A.C. Voltmeter M.I. 0 –500V A.C Shop outfit 1 No 0 1 No
71 Milli Voltmeter Shop outfit 6 Nos 0 6 Nos
72 D.C. Milli ammeter 0 -500m A
(Digital+ Analog)
Shop outfit 1 No. 0 1 No.
73 Ammeter MC 0-1A, 0-5 A, 0- 25
A
Shop outfit 1 No. 0 1 No.
74 A.C. Ammeter Shop outfit 2 Nos each 0 2 Nos each
75 A.C. Ammeter M.I 0-10 -20 A, 0-
15-25 A
Shop outfit 2 Nos each 0 2 Nos each
76 Kilo Wattmeter 0-5 kw (CC-0-5-
10 A,PC-0-250-500V)
Shop outfit 2 Nos 0 2 Nos
77 A.C. Energy Meter, Single phase 5
amp. Three Phase 15 amp
Shop outfit 2 Nos 0 2 Nos
78 Power Factor Meter single phse-
230 volt (Analog+ Digital)
Shop outfit 1 No each 0 1 No each
79 Frequency Meter (Analog +
Digital)
Shop outfit 1 No each 0 1 No each
80 Tachometer with stop watch
(Analog + Digital)
Shop outfit 1 No each 0 1 No each
81 Current TransformerPrimary-0-10-
20 A, Sec- 5 A)
Shop outfit 2Nos 0 2Nos
82 Potential Transformer(0-230-
400V/110V)
Shop outfit 2 Nos 0 2 Nos
83 Growler Internal+ External Shop outfit 1 No each 0 1 No each
84 Tong Tester / Clamp Meter 0 –
100 amp. AC Analog+ Digital)
Shop outfit 1No 0 1No
85 Megger 500 volts Shop outfit 1No 0 1No
86 Wheat Stone Bridge with
galvanometer & battery
Shop outfit 1No 0 1No
87 Earth Tester 0-30 Ohm Shop outfit 2 No 0 2 No
88 Contactor & auxiliary contacts 3
phase, 440 volt, 32 amp.
Shop outfit 1 No each 0 1 No each
Page | 12 Electrical Sector
Sr.
No.
Description of Item with
detailed specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students for
Instructor
Total
Quantity
Required
(Total of
previous
two
columns)
89 Load Bank5 KW( Lamp / heater
Type) Shop outfit 1No 0 1No
90 Brake Test arrangement with two
spring balance 0 - 25 kg rating Shop outfit 2 set 0 2 set
91 DC Power Supply 0-440v , 15A Shop outfit 2 Nos. 0 2 Nos.
92
Inverter- 1 KVA with 12 V
Battery Input- 12 volt DC,
Output- 220 volt AC
Shop outfit 1 No 0 1 No
93
Voltage Stabilizer Input: 150 –
230 volt AC Output: 220 volt AC
, 1 KVA
Shop outfit 1 No 0 1 No
94 Rheostat, 0 -1 Ohm, 5 Amp Shop outfit 2 Nos. 0 2 Nos.
95 Rheostat, 0 -10 Ohm, 5 Amp Shop outfit 2 Nos. 0 2 Nos.
96 Rheostat, 0- 25 Ohm, 10 Amp Shop outfit 2 Nos. 0 2 Nos.
97 Rheostat, 0- 300 Ohm, 3 Amp Shop outfit 2 Nos. 0 2 Nos.
98 Flux meter Shop outfit 2 Nos 0 2 Nos
99 Laboratory Type Induction Coil Shop outfit 1 no 0 1 no
List of Trainee Toolkit:
Sr.
No.
Description of Item with
detailed specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students for
Instructor
Total
Quantity
Required
(Total of
previous
two
columns)
1 Steel Tape, 10 mtr length Trainee
Toolkit 20 Nos. 01 Nos. 21 Nos.
2 Plier Insulated, 150 mm Trainee
Toolkit 20Nos. 01 Nos. 21 Nos.
3 Plier Side Cutting, 150 mm Trainee
Toolkit 20 Nos. 01 Nos. 21 Nos.
4 Screw Driver, 100 mm Trainee
Toolkit 20 Nos. 01 Nos. 21 Nos.
5 Screw Driver, 150 mm Trainee
Toolkit 20 Nos. 01 Nos. 21 Nos.
Page | 13 Electrical Sector
Sr.
No.
Description of Item with
detailed specifications
Item type i.e.
Machinery /
Equipment
OR Shop
Outfit OR
Trainee
Toolkit
Quantity
Required
per one
Batch of
Students
Quantity
Required
per one
Batch of
Students for
Instructor
Total
Quantity
Required
(Total of
previous
two
columns)
6 Electrician Connector, screw
driver insulated handle thin stem,
100 mm
Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
7 Heavy Duty Screw Driver , 200
mm
Trainee
Toolkit
20Nos. 01 Nos. 21 Nos.
8 Electrician Screw Driver thin
stem insulated handle, 250 mm
Trainee
Toolkit
20 Nos. 1 Nos. 21 Nos.
9 Punch Centre , 150 mm X 9 mm Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
10 Knife Double Bladed Electrician Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
11 Neon Tester Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
12 Steel Rule 300 mm Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
13 Hammer, cross peen with handle Trainee
Toolkit
20Nos. 01 Nos. 21 Nos.
14 Hammer, ball peen With handle Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
15 Gimlet 6 mm. Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
16 Bradawl Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
17 Scriber (Knurled center position ) Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
18 Pincer 150 mm Trainee
Toolkit
20Nos. 01 Nos. 21 Nos.
19 Wire Stripper Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
20 Tennon Saw 250 mm Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
21 Firmer chisel wood 12mm Trainee
Toolkit
20 Nos. 01 Nos. 21 Nos.
Page | 14 Electrical Sector
Annexure – II (Detail structure of the qualification/course)
Name of Qualification/course : Certificate Course in TOT for Electrical Sector
Sector : ELECTRICAL
Terminal Competency :
Note:
1. Workshop must be well established.
2. All required machinery must be in running condition.
3. All the practical of CITS has been covered in this syllabus of ToT.
4. Every week has 40-48 hours of training. 32 hours are for conducting practical and 8/16 hours
are for revising theory, repeating practical covered during the day.
5. Training batch strength will be of maximum 20 trainees.
6. Group size will be of maximum 5 trainees, minimum 4 groups per batch.
7. Practical like “Verification of Ohm’s law” must be performed by all group of trainees.
8. Practical like “Wire joints” must be performed by each & every trainee.
9. Training must be arranging in such a way that the whole day working hours can be utilized.
10. Practical jobs must be submitted to trainer.
Week
No.
Topic
No.
Title Of Component(Module) with
Subject duration in hours
Key Learning
Outcomes(content)
Practical
Equipme
nt
Required
NSQF
Level
Week
1
1 Safety Practices
(08 Hours)
After completion of
training (TOT)
trainees knows
about Safety
Practices
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Fires in electrical Circuits & Precautions
(01 Hours)
Fire Extinguishers & its Types
(02 Hours)
General Safety of Tools & Equipment
(01 Hours)
Rescue of person who is in contact with live
wire
(02 Hours)
Treat a person for electric shock/ injury
(02 Hours)
2 Basic Electricity
(24 Hours)
After completion of
training (TOT)
trainees knows
about Basic
As per
Graded
Ex. &
From
6
Verification of Ohm’s Law.
(04 Hours)
Page | 15 Electrical Sector
Measure current & voltage in series and
parallel circuits.
(04 Hours)
Electricity Anexture-
1(Tools
Equipmen
t List) Measurement of Resistance using Wheat-
stone bridge.
(02 Hours)
Verification of Kirchhoff’s Laws.
(04 Hours)
Practice on bare conductor joint.
(03 Hours)
Practice on PVC wire joints.
(03 Hours)
Practice on Crimping of lugs.
(01 Hours)
Soldering Practice.
(03 Hours)
Week
2
3 Effects of Electric current
(09 Hours)
After completion of
training (TOT)
trainees knows
about Effects of
Electric current
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Connecting heating elements & solenoid
coil.
(03 Hours)
Preparation of electrolyte. Measurement of
specific gravity. Grouping of Cells.
(02 Hours)
Testing the battery with High rate discharge
tester & Hydrometer.
(01 Hours)
Different methods of battery charging.
(02 Hours)
Care & Maintenance.
(01 Hours)
4 Wiring systems and types
(18 Hours)
After completion of
training (TOT)
trainees knows
about Wiring
systems and types
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Practice in using Wire gauge and
Micrometer.
(02 Hours)
PVC, Casing -capping, Conduit wiring,
Testing, Maintenance and repairing of
wiring.
(05 Hours)
Application of fuse, MCB, ELCB relays.
(05 Hours)
Multi-storied building wiring.
(03 Hours)
Measuring Earth resistance by Earth tester.
(03 Hours)
Page | 16 Electrical Sector
5 Magnetism, Alternating current & Poly
phase system
(13 Hours)
After completion of
training (TOT)
trainees knows
about Magnetism,
Alternating current
& Poly phase
system
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Preparation of Electromagnet.
(02 Hours)
Testing of Capacitor.
(03 Hours)
Week
3
Measurement of R, L, C, Z, Power, Power
Factor, Energy by different methods – Single
Phase & 3 Phase.
(06 Hours)
Measure the line & phase values of voltage
& current in star & Delta connection.
(02 Hours)
6 DC Motor
(32 Hours)
After completion of
training (TOT)
trainees knows
about DC Motor
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Identification of parts of DC motor.
(04 Hours)
Starting and running of series, shunt &
compound Motors using starter (3 point & 4
point).
(08 Hours)
Speed control of DC Shunt motor (armature
& Field control).
(04 Hours)
Characteristics curve &Efficiency
(08 Hours)
Week
4
Dismantling & Re assembling of DC motor.
(08 Hours)
7 Work, Power & Energy, Power factor
(16 Hours)
After completion of
training (TOT)
trainees knows
about Work, Power
& Energy, Power
factor
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Measure the power & Power Factor in a
balanced & unbalanced load by two
wattmeter method, use of Power Factor
meter.
(06 Hours)
Improve the power factor of a circuit using
static capacitor.
(06 Hours)
Measure Energy in single phase Load.
(04 Hours)
8 Transformer
(32 Hours)
After completion of
training (TOT)
trainees knows
about Transformer
As per
Graded
Ex. &
From
6
Transformation ratio.
(04 Hours)
Page | 17 Electrical Sector
Open Circuit (OC) Test ,Short Circuit( SC)
test ,Efficiency &Regulation
(04 Hours)
Anexture-
1(Tools
Equipmen
t List) Week
5
Parallel Operation.
(04 Hours)
Connection of star and Delta
(04 Hours)
Testing of Oil
(04 Hours)
Troubleshooting.
(04 Hours)
Verify the voltage of autotransformer with
different tapings.
(04 Hours)
Measurement of high current & voltage
using CT and PT.
(04 Hours)
9 Electrical Measuring instruments
(16 Hours)
After completion of
training (TOT)
trainees knows
about Electrical
Measuring
instruments
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Identify the types of instruments
(02 Hours)
Uses of PMMC and MI meters
(02 Hours)
Calibration of meters.
(04 Hours)
Week
6
Calibration of Energy meter.
(04 Hours)
Measurement of insulation resistance.
(04 Hours)
10 Illumination
(16 Hours)
After completion of
training (TOT)
trainees knows
about Illumination
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Connection & Installation of all kinds of
lamps.
(02 Hours)
Connection of single & twin tube light
fittings.
(04 Hours)
Connection of HPMV & HPSV lamp.
(04 Hours)
Practice on Decorative Light.
(04 Hours)
Use of Lux-meter.
(02 Hours)
11 Basic Electronics
(32 Hours)
After completion of
training (TOT)
trainees knows
about Basic
As per
Graded
Ex. &
From
6
Color coding of Resistors.
(02 Hours)
Page | 18 Electrical Sector
Construction of Rectifiers.
(04 Hours)
Electronics Anexture-
1(Tools
Equipmen
t List) Check the different wave shape using CRO.
(02 Hours)
Week
7
Testing the Transistor
(02 Hours)
Single stage Amplifier
(03 Hours)
Simple circuit containing power diode &
power transistor.
(03 Hours)
UJT for Triggering, FET & MOSFET as an
amplifier.
(08 Hours)
Control circuit for -SCR, DIAC, TRIAC,
IGBT.
(08 Hours)
12 OP-AMP circuits & Logic Gates.
(8 Hours)
After completion of
training (TOT)
trainees knows
about OP-AMP
circuits & Logic
gates
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Assemble different OP-AMP circuits using
IC 741.
(04 Hours)
Verification of Logic gates truth tables.
(04 Hours)
Week
8
13 Three phase Induction motor
(16 Hours)
After completion of
training (TOT)
trainees knows
about three phase
induction motor
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Connection with various starters.
(06 Hours)
Starting, running & loading of ac 3 phase
Squirrel cage & Wound rotor Induction
motors.
(06 Hours)
Change the direction of rotation.
(02 Hours)
Measurement of speed, torque, slip, current,
power , PF etc.
(02 Hours)
14 Single phase & Special type of motors
(16 Hours)
After completion of
training (TOT)
trainees knows
about Single phase
& Special type of
motors
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Starting, running of single phase motors &
change DOR [direction of rotation].
(10 Hours)
Dismantling and Reassembling of different
types of 1 Ø motors.
(06 Hours)
Week
9
15 Alternator
(16 Hours)
After completion of
training (TOT)
As per
Graded
6
Page | 19 Electrical Sector
Identification of parts and terminals of
Alternator.
(02 Hours)
trainees knows
about Alternator
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
Build up voltage, Excitation, loading,
Characteristics.
(04 Hours)
Calculation of Regulation & Efficiency.
(02 Hours)
Synchronization (Parallel Operation) of
Alternators by Different Methods.
(04 Hours)
Starting and Running, building up voltage
and loading of MG set.
(04 Hours)
16 Synchronous Motor
(06 Hours)
After completion of
training (TOT)
trainees knows
about Synchronous
Motor
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Identification of parts of Synchronous
Motor.
(01 Hours)
Connect, Start and Run the Synchronous
Motor.
(02 Hours)
Plot V curve
(01 Hours)
Application of synchronous motor.
(01 Hours)
Power factor correction
(01 Hours)
17 Winding and Insulating materials
(10 Hours)
After completion of
training (TOT)
trainees knows
about Winding and
Insulating materials
As per
Graded
Ex.
&From
Anexture-
1(Tools
Equipmen
t List)
6
Practice on small transformer winding.
(04 Hours)
Testing of burnt out DC machine for re-
winding, winding procedure, practice on
small armature winding, impregnation,
baking.
(06 Hours)
Week
10
18 AC motor stator Re-winding:-
(8 Hours)
After completion of
training (TOT)
trainees knows
about AC motor
stator Re-winding
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Testing of burnt stator, rewinding procedure,
practice on single & double layer winding.
(06 Hours)
Impregnations, Varnishing, Baking &
Assembling.
(02 Hours)
19 Basic Rectifiers and Inverter circuits-
(16 Hours)
After completion of
training (TOT)
As per
Graded
6
Page | 20 Electrical Sector
Basic Rectifiers and Inverter Circuit.
(04 Hours)
trainees knows
about Basic
Rectifiers and
Inverter circuits
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
Speed control of DC Motor using DC Drive.
(04 Hours)
Speed control of AC Motor (Induction
Motor) using AC Drive.
(04 Hours)
Maintenance of AC/DC machines, voltage
stabilizer, UPS, Inverter & Drives.
(04 Hours)
20 Industrial Wiring
(16 Hours)
After completion of
training (TOT)
trainees knows
about Industrial
Wiring
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Practice on wiring of motors.
(04 Hours)
Protective devices and control panel etc.
(02 Hours)
Practice of wiring on UPS & Inverter.
(02 Hours)
Week
11
Practice on control cabinet / control panel
assembly, wiring, checking / buzzing &
testing for the following exercises on 3-Ø
induction motor.
(03 Hours)
DOL starter with push button control
(01 Hours)
Forward / Reverse starter, Automatic Star /
Delta starter.
(04 Hours)
21 Domestic appliances
(16 Hours)
After completion of
training (TOT)
trainees knows
about Domestic
appliances
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Repair and test of various domestic
appliances and equipment
(08 Hours)
Dismantling, Servicing, re-assembling &
Testing, Care & Maintenance.
(08 Hours)
22 Planning, Estimation & Costing Of
Wiring
(8 Hours)
After completion of
training (TOT)
trainees knows
about Planning,
Estimation &
Costing Of Wiring
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Domestic / Industrial / Commercial and
Multistoried building Workshop Estimating
and costing labour / Materials-accessories as
per layout.
(08 Hours)
Week
12
23 Power Generation
(8 Hours)
After completion of
training (TOT)
As per
Graded
6
Page | 21 Electrical Sector
Non-conventional power plant –Prepare
layout plan.
(08 Hours)
trainees knows
about Power
Generation
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
24 Transmission of electric power, UG cables
& Distribution of power
(24 Hours)
After completion of
training (TOT)
trainees knows
about Transmission
of electric power,
UG cables &
Distribution of
power
As per
Graded
Ex. &
From
Anexture-
1(Tools
Equipmen
t List)
6
Identification of different types of insulators
(01 Hours)
Binding insulators, fixing of jumper by
crimping tool.
(04 Hours)
Joints in UG cables.
(03 Hours)
Visit to HT/LT Substation
(08 Hours)
To visit and Prepare layout plan and single
line diagram of the Thermal / Hydro /
Nuclear power plant.
(08 Hours)
Page | 22 Electrical Sector
Annexure – III (Assessment evidences)
Name of Qualification/Syllabus: Certificate Course in TOT for Electrical Sector
Assessable
Outcome/
component
Assessment criteria for the Outcome Total
Marks
Out
of
Marks
Allocation
(Skill
Practical)
Safety
Practices
Fires in electrical Circuits & Precautions 100 20 20
Fire Extinguishers & its Types 20 20
General Safety of Tools & Equipment 20 20
Rescue of person who is in contact with live wire 20 20
Treat a person for electric shock/ injury 20 20
Basic
Electricity
Verification of Ohm’s Law. 100 15 15
Measure current & voltage in series and parallel circuits. 15 15
Measurement of Resistance using Wheat- stone bridge. 15 15
Verification of Kirchhoff’s Laws. 15 15
Practice on bare conductor joint. 10 10
Practice on PVC wire joints. 10 10
Practice on Crimping of lugs. 10 10
Soldering Practice. 10 10
Effects of
Electric
current
Connecting heating elements & solenoid coil. 100
20 20
Preparation of electrolyte. Measurement of specific
gravity. Grouping of Cells. 20 20
Testing the battery with High rate discharge tester &
Hydrometer. 20 20
Different methods of battery charging. 20 20
Care & Maintenance. 20 20
Wiring
systems and
types –
Practice in using Wire gauge and Micrometer. 100
20 20
PVC, Casing -capping, Conduit wiring, Testing,
Maintenance and repairing of wiring. 20 20
Application of fuse, MCB, ELCB relays. 20 20
Multi-storied building wiring. 20 20
Measuring Earth resistance by Earth tester. 20 20
Magnetism,
Alternating
current &
Poly phase
system
Preparation of Electromagnet. 100 25 25
Testing of Capacitor. 25 25
Measurement of R, L, C, Z, Power, Power Factor, Energy
by different methods – Single Phase & 3 Phase. 25 25
Measure the line & phase values of voltage & current in
star & Delta connection. 25 25
Page | 23 Electrical Sector
Assessable
Outcome/
component
Assessment criteria for the Outcome Total
Marks
Out
of
Marks
Allocation
(Skill
Practical)
DC Motor Identification of parts of DC motor. 100 20 20
Starting and running of series, shunt & compound Motors
using starter (3 point& 4 point).
20 20
Speed control of DC Shunt motor (armature & Field
control).
20 20
Characteristics curve &Efficiency 20 20
Dismantling & Re assembling of DC motor. 20 20
Work, Power
& Energy,
Power factor
Measure the power & Power Factor in a balanced &
unbalanced load by two wattmeter method, use of Power
Factor meter.
100 40 40
Improve the power factor of a circuit using static
capacitor.
40 40
Measure Energy in single phase Load. 20 20
Transformer Transformation ratio. 100 10 10
Open Circuit (OC) Test ,Short Circuit( SC) test
,Efficiency &Regulation
20 20
Parallel Operation. 20 20
Connection of star and Delta 10 10
Testing of Oil 10 10
Troubleshooting. 10 10
Verify the voltage of autotransformer with different
tapings.
10 10
Measurement of high current & voltage using CT and
PT.
10 10
Electrical
Measuring
instruments
Identify the types of instruments 100 20 20
Uses of PMMC and MI meters 20 20
Calibration of meters. 20 20
Calibration of Energy meter. 20 20
Measurement of insulation resistance. 20 20
Illumination Connection & Installation of all kinds of lamps. 100 20 20
Connection of single & twin tube light fittings. 20 20
Connection of HPMV & HPSV lamp. 20 20
Practice on Decorative Light. 20 20
Use of Lux-meter. 20 20
Basic
Electronics
Color coding of Resistors. 100 10 10
Construction of Rectifiers. 10 10
Check the different wave shape using CRO. 10 10
Testing the Transistor 10 10
Single stage Amplifier 10 10
Simple circuit containing power diode & power
transistor.
10 10
UJT for Triggering, FET & MOSFET as an amplifier. 10 10
Control circuit for -SCR, DIAC, TRIAC, and IGBT. 10 10
Page | 24 Electrical Sector
Assessable
Outcome/
component
Assessment criteria for the Outcome
Out
of
Marks
Allocation
(Skill
Practical)
OP-AMP
circuits &
Logic Gates.
Assemble different OP-AMP circuits using IC 741. 10 10
Verification of Logic gates truth tables. 10 10
Three phase
Induction
motor
Connection with various starters. 100 25 25
Starting, running & loading of ac 3 phase Squirrel cage &
Wound rotor Induction motors.
25 25
Change the direction of rotation. 25 25
Measurement of speed, torque, slip, current, power , PF
etc.
25 25
Single phase
& Special
type of
motors
Starting, running of single phase motors & change DOR
[direction of rotation].
100 50 50
Dismantling and Reassembling of different types of 1 Ø
motors.
50 50
Alternator Identification of parts and terminals of Alternator. 100 20 20
Build up voltage, Excitation, loading, Characteristics. 20 20
Calculation of Regulation & Efficiency. 20 20
Synchronization (Parallel Operation) of Alternators by
Different Methods.
20 20
Starting and Running, building up voltage and loading of
MG set.
20 20
Synchronous
Motor
Identification of parts of Synchronous Motor. 100 20 20
Connect, Start and Run the Synchronous Motor. 20 20
Plot V curve 20 20
Application of synchronous motor. 20 20
Power factor correction 20 20
Winding and
Insulating
materials
Practice on small transformer winding. 100 50 50
Testing of burnt out DC machine for re- winding,
winding procedure, practice on small armature winding,
impregnation, baking.
50 50
AC motor
stator Re-
winding:-
Testing of burnt stator, rewinding procedure, practice on
single & double layer winding.
100 50 50
Impregnations, Varnishing, Baking & Assembling. 50 50
Basic
Rectifiers
and Inverter
circuits
Basic Rectifiers and Inverter Circuit. 100 25 25
Speed control of DC Motor using DC Drive. 25 25
Speed control of AC Motor (Induction Motor) using AC
Drive.
25 25
Maintenance of AC/DC machines, voltage stabilizer,
UPS, Inverter & Drives.
25 25
Page | 25 Electrical Sector
Assessable
Outcome/
component
Assessment criteria for the Outcome Total
Marks
Out
of
Marks
Allocation
(Skill
Practical)
Industrial
Wiring Practice on wiring of motors. 100 20 20
Protective devices and control panel etc. 20 20
Practice of wiring on UPS & Inverter. 20 20
Practice on control cabinet / control panel assembly,
wiring, checking / buzzing & testing for the following
exercises on 3-Ø induction motor.
20 20
DOL starter with push button control 10 10
Forward / Reverse starter, Automatic Star / Delta
starter. 10 10
Domestic
appliances Repair and test of various domestic appliances and
equipment,
100 50 50
Dismantling, Servicing, re-assembling & Testing,
Care & Maintenance. 50 50
Planning,
Estimation &
Costing Of
Wiring
Domestic / Industrial / Commercial and Multistoried
building Workshop Estimating and costing labour /
Materials-accessories as per layout.
100
100 100
Power
Generation Non-conventional power plant –Prepare layout plan.
100 100 100
Transmission of
electric power,
UG cables &
Distribution of
power
Identification of different types of insulators 100
25 25
Binding insulators, fixing of jumper by crimping tool. 25 25
Joints in UG cables. 25 25
Visit to HT/LT Substation 25 25
To visit and Prepare layout plan and single line
diagram of the Thermal / Hydro / Nuclear power
plant.
25 25
top related