chapter 18
Post on 25-Jan-2016
18 Views
Preview:
DESCRIPTION
TRANSCRIPT
Chapter 18Chapter 18
Direct Current CircuitsDirect Current Circuits
Sources of emfSources of emf
The source that maintains the The source that maintains the current in a closed circuit is called a current in a closed circuit is called a source of source of emfemf Any devices that increase the potential Any devices that increase the potential
energy of charges circulating in energy of charges circulating in circuits are sources of emfcircuits are sources of emf
Examples include batteries and Examples include batteries and generatorsgenerators
emf and Internal emf and Internal ResistanceResistance
A real battery has A real battery has some internal some internal resistanceresistance
Therefore, the Therefore, the terminal voltage terminal voltage is not equal to the is not equal to the emfemf
More About Internal More About Internal ResistanceResistance
The schematic The schematic shows the internal shows the internal resistance, rresistance, r
The terminal The terminal voltage, ΔV = Vvoltage, ΔV = Vbb--VVaa
ΔV = ε – IrΔV = ε – Ir For the entire For the entire
circuit, ε = IR + Ircircuit, ε = IR + Ir
Internal Resistance and Internal Resistance and emf, contemf, cont
ε is equal to the terminal voltage ε is equal to the terminal voltage when the current is zerowhen the current is zero Also called the Also called the open-circuit voltageopen-circuit voltage
R is called the R is called the load resistanceload resistance The current depends on both the The current depends on both the
resistance external to the battery resistance external to the battery and the internal resistanceand the internal resistance
Resistors in SeriesResistors in Series
When two or more resistors are connected When two or more resistors are connected end-to-end, they are said to be in end-to-end, they are said to be in seriesseries
The current is the same in resistors The current is the same in resistors because any charge that flows through because any charge that flows through one resistor flows through the otherone resistor flows through the other
The sum of the potential differences The sum of the potential differences across the resistors is equal to the total across the resistors is equal to the total potential difference across the potential difference across the combinationcombination
Resistors in Series, contResistors in Series, cont
Potentials addPotentials add ΔV = IRΔV = IR11 + IR + IR22 = I = I
(R(R11+R+R22)) Consequence of Consequence of
Conservation of EnergyConservation of Energy The equivalent The equivalent
resistance has the resistance has the effect on the circuit effect on the circuit as the original as the original combination of combination of resistorsresistors
Equivalent Resistance – Equivalent Resistance – SeriesSeries
RReqeq = R = R11 + R + R22 + R + R33 + … + … The equivalent resistance of a The equivalent resistance of a
series combination of resistors is series combination of resistors is the algebraic sum of the individual the algebraic sum of the individual resistances and is always greater resistances and is always greater than any of the individual than any of the individual resistanceresistance
Equivalent Resistance – Equivalent Resistance – SeriesSeriesAn ExampleAn Example
Four resistors are replaced with their Four resistors are replaced with their equivalent resistanceequivalent resistance
QUICK QUIZ 18.1When a piece of wire is used to connect points b and c in this figure, the brightness of bulb R1 (a) increases, (b) decreases, or (c) stays the same. The brightness of bulb R2 (a) increases, (b) decreases, or (c) stays the same.
QUICK QUIZ 18.1 ANSWER
R1 becomes brighter. Connecting a wire from b to c provides a nearly zero resistance path from b to c and decreases the total resistance of the circuit from R1 + R2 to just R1. Ignoring internal resistance, the potential difference maintained by the battery is unchanged while the resistance of the circuit has decreased. The current passing through bulb R1 increases, causing this bulb to glow brighter. Bulb R2 goes out because essentially all of the current now passes through the wire connecting b and c and bypasses the filament of Bulb R2.
QUICK QUIZ 18.2With the switch in this circuit (figure a) closed, no current exists in R2 because the current has an alternate zero-resistance path through the switch. Current does exist in R1 and this current is measured with the ammeter at the right side of the circuit. If the switch is opened (figure b), current exists in R2. After the switch is opened, the reading on the ammeter (a) increases, (b) decreases, (c) does not change.
QUICK QUIZ 18.2 ANSWER
(b). When the switch is opened, resistors R1 and R2 are in series, so that the total circuit resistance is larger than when the switch was closed. As a result, the current decreases.
Resistors in ParallelResistors in Parallel
The potential difference across each The potential difference across each resistor is the same because each is resistor is the same because each is connected directly across the battery connected directly across the battery terminalsterminals
The current, I, that enters a point must be The current, I, that enters a point must be equal to the total current leaving that pointequal to the total current leaving that point I = II = I11 + I + I22
The currents are generally not the sameThe currents are generally not the same Consequence of Conservation of ChargeConsequence of Conservation of Charge
Equivalent Resistance – Equivalent Resistance – Parallel, ExamplesParallel, Examples
Equivalent resistance replaces the two original Equivalent resistance replaces the two original resistancesresistances
Household circuitsHousehold circuits are wired so the electrical are wired so the electrical devices are connected in paralleldevices are connected in parallel Circuit breakers may be used in series with other Circuit breakers may be used in series with other
circuit elements for safety purposescircuit elements for safety purposes
Equivalent Resistance – Equivalent Resistance – ParallelParallel
Equivalent ResistanceEquivalent Resistance
The inverse of the The inverse of the equivalent resistance equivalent resistance of two or more of two or more resistors connected in resistors connected in parallel is the parallel is the algebraic sum of the algebraic sum of the inverses of the inverses of the individual resistanceindividual resistance The equivalent is The equivalent is
always less than the always less than the smallest resistor in the smallest resistor in the groupgroup
321eq R
1
R
1
R
1
R
1
Problem-Solving Strategy, Problem-Solving Strategy, 11
When two or more unequal When two or more unequal resistors are connected in resistors are connected in seriesseries, , they carry the same current, but they carry the same current, but the potential differences across the potential differences across them are not the same.them are not the same. The resistors add directly to give the The resistors add directly to give the
equivalent resistance of the series equivalent resistance of the series combinationcombination
Problem-Solving Strategy, Problem-Solving Strategy, 22
When two or more unequal resistors When two or more unequal resistors are connected in are connected in parallelparallel, the , the potential differences across them are potential differences across them are the same. The currents through the same. The currents through them are not the same.them are not the same. The equivalent resistance of a parallel The equivalent resistance of a parallel
combination is found through reciprocal combination is found through reciprocal additionaddition
The equivalent resistance is always less The equivalent resistance is always less than the smallest individual resistor in than the smallest individual resistor in the combinationthe combination
Problem-Solving Strategy, Problem-Solving Strategy, 33
A complicated circuit consisting of several A complicated circuit consisting of several resistors and batteries can often be resistors and batteries can often be reduced to a simple circuit with only one reduced to a simple circuit with only one resistorresistor Replace any resistors in series or in parallel Replace any resistors in series or in parallel
using steps 1 or 2. using steps 1 or 2. Sketch the new circuit after these changes have Sketch the new circuit after these changes have
been madebeen made Continue to replace any series or parallel Continue to replace any series or parallel
combinations combinations Continue until one equivalent resistance is Continue until one equivalent resistance is
foundfound
Problem-Solving Strategy, Problem-Solving Strategy, 44
If the current in or the potential If the current in or the potential difference across a resistor in the difference across a resistor in the complicated circuit is to be complicated circuit is to be identified, start with the final circuit identified, start with the final circuit found in step 3 and gradually work found in step 3 and gradually work back through the circuitsback through the circuits Use ΔV = I R and the procedures in Use ΔV = I R and the procedures in
steps 1 and 2steps 1 and 2
QUICK QUIZ 18.3With the switch in this circuit (figure a) open, there is no current in R2. There is current in R1 and this current is measured with the ammeter at the right side of the circuit. If the switch is closed (figure b), there is current in R2. When the switch is closed, the reading on the ammeter (a) increases, (b) decreases, or (c) remains the same.
QUICK QUIZ 18.3 ANSWER
(a). When the switch is closed, resistors R1 and R2 are in parallel, so that the total circuit resistance is smaller than when the switch was open. As a result, the total current increases.
QUICK QUIZ 18.4You have a large supply of lightbulbs and a battery. You start with one lightbulb connected to the battery and notice its brightness. You then add one lightbulb at a time, each new bulb being added in parallel to the previous bulbs. As the lightbulbs are added, what happens (a) to the brightness of the bulbs? (b) to the current in the bulbs? (c) to the power delivered by the battery? (d) to the lifetime of the battery? (e) to the terminal voltage of the battery? Hint: Do not ignore the internal resistance of the battery.
QUICK QUIZ 18.4 ANSWER
(a) The brightness of the bulbs decreases
(b) The current in the bulbs decreases
(c) The power delivered by the battery increases
(d) The lifetime of the battery decreases
(e) The terminal voltage of the battery decreases
Equivalent Equivalent Resistance – Resistance – Complex Complex CircuitCircuit
Kirchhoff’s RulesKirchhoff’s Rules
There are ways in which resistors There are ways in which resistors can be connected so that the can be connected so that the circuits formed cannot be reduced circuits formed cannot be reduced to a single equivalent resistorto a single equivalent resistor
Two rules, called Kirchhoff’s Rules Two rules, called Kirchhoff’s Rules can be used insteadcan be used instead
Statement of Kirchhoff’s Statement of Kirchhoff’s RulesRules
Junction RuleJunction Rule The sum of the currents entering any The sum of the currents entering any
junction must equal the sum of the currents junction must equal the sum of the currents leaving that junctionleaving that junction
A statement of Conservation of ChargeA statement of Conservation of Charge
Loop RuleLoop Rule The sum of the potential differences across The sum of the potential differences across
all the elements around any closed circuit all the elements around any closed circuit loop must be zeroloop must be zero
A statement of Conservation of EnergyA statement of Conservation of Energy
More About the Junction More About the Junction RuleRule
II11 = I = I2 2 + I+ I33
From From Conservation of Conservation of ChargeCharge
Diagram b shows Diagram b shows a mechanical a mechanical analoganalog
Setting Up Kirchhoff’s Setting Up Kirchhoff’s RulesRules
Assign symbols and directions to the Assign symbols and directions to the currents in all branches of the circuitcurrents in all branches of the circuit If a direction is chosen incorrectly, the If a direction is chosen incorrectly, the
resulting answer will be negative, but resulting answer will be negative, but the magnitude will be correctthe magnitude will be correct
When applying the loop rule, choose When applying the loop rule, choose a direction for transversing the loopa direction for transversing the loop Record voltage drops and rises as they Record voltage drops and rises as they
occuroccur
More About the Loop RuleMore About the Loop Rule Traveling around the loop Traveling around the loop
from a to bfrom a to b In a, the resistor is In a, the resistor is
transversed in the transversed in the direction of the current, direction of the current, the potential across the the potential across the resistor is –IRresistor is –IR
In b, the resistor is In b, the resistor is transversed in the transversed in the direction opposite of the direction opposite of the current, the potential current, the potential across the resistor is +IRacross the resistor is +IR
Loop Rule, finalLoop Rule, final In c, the source of In c, the source of
emf is transversed in emf is transversed in the direction of the the direction of the emf (from – to +), the emf (from – to +), the change in the electric change in the electric potential is +εpotential is +ε
In d, the source of In d, the source of emf is transversed in emf is transversed in the direction opposite the direction opposite of the emf (from + to of the emf (from + to -), the change in the -), the change in the electric potential is -εelectric potential is -ε
Junction Equations from Junction Equations from Kirchhoff’s RulesKirchhoff’s Rules
Use the junction rule as often as Use the junction rule as often as needed so long as, each time you needed so long as, each time you write an equation, you include in it write an equation, you include in it a current that has not been used in a current that has not been used in a previous junction rule equationa previous junction rule equation In general, the number of times the In general, the number of times the
junction rule can be used is one fewer junction rule can be used is one fewer than the number of junction points in than the number of junction points in the circuitthe circuit
Loop Equations from Loop Equations from Kirchhoff’s RulesKirchhoff’s Rules
The loop rule can be used as often The loop rule can be used as often as needed so long as a new circuit as needed so long as a new circuit element (resistor or battery) or a element (resistor or battery) or a new current appears in each new new current appears in each new equationequation
You need as many independent You need as many independent equations as you have unknownsequations as you have unknowns
Problem-Solving Strategy Problem-Solving Strategy – Kirchhoff’s Rules– Kirchhoff’s Rules
Draw the circuit diagram and assign Draw the circuit diagram and assign labels and symbols to all known and labels and symbols to all known and unknown quantities. Assign directions unknown quantities. Assign directions to the currents.to the currents.
Apply the junction rule to any junction Apply the junction rule to any junction in the circuitin the circuit
Apply the loop rule to as many loops as Apply the loop rule to as many loops as are needed to solve for the unknownsare needed to solve for the unknowns
Solve the equations simultaneously for Solve the equations simultaneously for the unknown quantities.the unknown quantities.
RC CircuitsRC Circuits
A direct current circuit may contain A direct current circuit may contain capacitors and resistors, the current will capacitors and resistors, the current will vary with timevary with time
When the circuit is completed, the When the circuit is completed, the capacitor starts to chargecapacitor starts to charge
The capacitor continues to charge until The capacitor continues to charge until it reaches its maximum charge (Q = Cε)it reaches its maximum charge (Q = Cε)
Once the capacitor is fully charged, the Once the capacitor is fully charged, the current in the circuit is zerocurrent in the circuit is zero
Charging Capacitor in an Charging Capacitor in an RC CircuitRC Circuit
The charge on the The charge on the capacitor varies with capacitor varies with timetime q = Q(1 – eq = Q(1 – e-t/RC-t/RC)) The The time constanttime constant, ,
=RC=RC The time constant The time constant
represents the time represents the time required for the required for the charge to increase charge to increase from zero to 63.2% from zero to 63.2% of its maximumof its maximum
Discharging Capacitor in Discharging Capacitor in an RC Circuitan RC Circuit
When a charged When a charged capacitor is placed in capacitor is placed in the circuit, it can be the circuit, it can be dischargeddischarged q = Qeq = Qe-t/RC-t/RC
The charge decreases The charge decreases exponentiallyexponentially
At t = At t = = RC, the = RC, the charge decreases to charge decreases to 0.368 Q0.368 Qmaxmax In other words, in one In other words, in one
time constant, the time constant, the capacitor loses 63.2% of capacitor loses 63.2% of its initial chargeits initial charge
Electrical SafetyElectrical Safety
Electric shock can result in fatal burnsElectric shock can result in fatal burns Electric shock can cause the muscles of Electric shock can cause the muscles of
vital organs (such as the heart) to vital organs (such as the heart) to malfunctionmalfunction
The degree of damage depends onThe degree of damage depends on the magnitude of the currentthe magnitude of the current the length of time it actsthe length of time it acts the part of the body through which it passesthe part of the body through which it passes
Effects of Various CurrentsEffects of Various Currents
5 mA or less5 mA or less can cause a sensation of shockcan cause a sensation of shock generally little or no damagegenerally little or no damage
10 mA10 mA hand muscles contracthand muscles contract may be unable to let go a of live wiremay be unable to let go a of live wire
100 mA 100 mA if passes through the body for 1 second or if passes through the body for 1 second or
less, can be fatalless, can be fatal
Ground WireGround Wire
Electrical Electrical equipment equipment manufacturers manufacturers use electrical use electrical cords that have a cords that have a third wire, called third wire, called a grounda ground
Prevents shocksPrevents shocks
Ground Fault Interrupts Ground Fault Interrupts (GFI)(GFI)
Special power outletsSpecial power outlets Used in hazardous areasUsed in hazardous areas Designed to protect people from Designed to protect people from
electrical shockelectrical shock Senses currents (of about 5 mA or Senses currents (of about 5 mA or
greater) leaking to groundgreater) leaking to ground Shuts off the current when above Shuts off the current when above
this levelthis level
Electrical Signals in Electrical Signals in NeuronsNeurons
Specialized cells in the body, called Specialized cells in the body, called neuronsneurons, , form a complex network that receives, form a complex network that receives, processes, and transmits information from processes, and transmits information from one part of the body to anotherone part of the body to another
Three classes of neuronsThree classes of neurons Sensory neuronsSensory neurons
Receive stimuli from sensory organs that monitor the Receive stimuli from sensory organs that monitor the external and internal environment of the bodyexternal and internal environment of the body
Motor neuronsMotor neurons Carry messages that control the muscle cellsCarry messages that control the muscle cells
InterneuronsInterneurons Transmit information from one neuron to anotherTransmit information from one neuron to another
Diagram of a NeuronDiagram of a Neuron
top related