clean rooms sam® 24 h.o. high output - weaver tech · clean rooms lotematiooaj sam® 24 h.o. high...

Post on 13-Oct-2020

6 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Clean RoomslotematiooaJ SAM® 24 H.O. High Output

Delivers Up To 1000 CFM

SAM 24 H.O. Series Fan Filter Units are ideal forcleanroom applications with high ceilings.

SAM 24 1-1.0. Fan Filter Units are designed to de­liver from 1000-1200 CFM, and include a 100mm99.99% efficient HEPA filter, 2" prefilter, seismicclip suspension points, solid state variable speedcontrol with RFI suppression, and a safety switch.

Housings are fabricated from steel with a whitepowdercoat finish and include seismic clip suspen­sion points.

The energy efficient N31 0 motor blower is a lowwatt, backward curved impeller, single phase, per­manent split capacitor type motor blower assemblywith thermal overload protection. Units are avail­able in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz)and 277 (60 Hz).

The HErA 100mm final filter is protected with awhite epoxy diamond pattern grille and is testedaccording to accepted procedures as described bythe Institute of Environmental Sciences (lEST) andor ISO standards.

CRF units feature a polystyrene eggcrate grillein an anodized aluminum frame hinged to open,permitting removal of the HEPA or ULPA filterwithout removing the unit from the ceiling.

Popular options include an 8' power cord (I 10 Voltonly), 99.9995% eff. ULPA grade final filter, UL900 Class I filters and duct collar adapters. Referto the back of this section for more options andaccessones.

Consult with one of our cleanroom experts in yourarea, or call the factory for more infonnation.

SAM is a registered trademark owned by Clean Rooms International

July/2007 Phone: 616-452-8700 * Fax: 616- 452-2372Email: sales@cleanroomsinl.com

www.cleanroomsinl.com

441

Clean Roomsloteroatio(8) Data & Specifications for SAM® 24 H.O.

CRF Style Filter Data: Size: 20-5/8" x 44-5/8" x 6" withanodized aluminum frame and diamond pattern whiteepoxy face screen. The HEPA Filter with IOOmmmedia isdesigned for 145 FPM average face velocity @ initial DAD

w.g. and has a rated efficiency of99.99% @ 0.3 micron orlarger. An access port with removable plug is located in thecenter of the filter element faceand is used for introducing anupstream challenge or measuringstatic pressure.

Swing Down(irilk

Filtc:rFilter

Filter

Clamp

Gasket StyleKnife Edge Seal

SAM 24 H.G. CRF Style

Filter Clamp Detail Exploded View

NCR Style Filter Data: Size: 23-5/8" x 47-5/8" x 6" withexposed anodized aluminum frame and diamond patternwhite epoxy face screen. The HEPA Filter with 100mmmedia is designed for 145 FPM average face velocity @initial OAO W.g. and has a rated efficiency of99.99% @ 0.3micron or larger.

All Models

Standard Equipment: Includes a N31 0 Low Watt motor,prefilter and a solid state variable speed control with RFISuppression. A safety switch is provided for all voltages aslisted below.

Options: ULPA Filter, Power Cord, Duct Collar Adaptors.More options are shown in the back of this section.

Ordering InformationMfg. Code

Model or

StyleSizeMotorVoltageHzWattsFLAWeight

Description12500

SAM 2411.0.NCR2x4N31011560IR51.690 Ibs. (40.9 kg.)

12501

SAM 24 H.O.NCR2x4N31020R-23050/60165.8-.790 Ibs. (40.9 kg.)

12502

SAM 24 H.O.NCR2 x 4N31027760165.690 Ibs. (40.9 kg.)

SAM 24 H.O. CRF

CRF2 x 4N31011560IR51.6110 Ibs. (50 kg.)

SAM 24 H.O. CRF

CRF2x4N31020R-23050/60165.8-.7110 Ibs. (50 kg.)

SAM 24 H.O. CRF

CRF2 x 4N31027760165.6110 Ibs. (50 kg.)

Replacement Filters302027

302028

302029

302197

NCR Stylc HEPA Filter. 99.99'% efr @ 0.3 mieron

NCR Style ULPA Filter, 99.9995% err. @ 0.12 mieron

CRF Style ULPA Filter. 99.99%, efT.@ 0.3 mieron

CRF Style HEPA Filter. 99.9995% efT.@ 0.12 mieron

Pret1lter 20 x 20 x 2, 30'% ASHRAE etlicient. pleated type

NOTE: Consult with the faetory for horizontal flow applications

442 Phone: 616-452-8700 * Fax: 616- 452-2372Email: sales@cleanroomsint.com

www.cleanroomsint.com

July/2007

top related