clue machinery - july 2015 issue
Post on 22-Jul-2016
242 Views
Preview:
DESCRIPTION
TRANSCRIPT
M A C H I N E R Y
JULY 2015Volume 30 Number 7Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.comemail: clue@cluemachines.com
a TOS Varnsdorf company
TOS Trade Canada Inc.415 Industrial Dr.Milton, ON L9T 5A6http://www.tostrade.com
Tel: (905) 878 0888Fax: (905) 878 9022info@tostrade.com
WHN-13 CNCStructured to guaranteehigh rigidity, reliabilityand accuracy.
Wide range of technologicalfunctions
www.tostrade.com
Starting at:$499,000 US
X - 3500 mm / 137.79”Y - 2500 mm / 98.42”Z - 1600 mm / 62.99”W - 800 mm / 31.49”
Spindle 130mm / 5.1”Speed 3000 rpm
Table 1800 x 2200 mm 70.8” x 86.6”
CNC Fanuc / Heidenhain
MACHINERY IN INVENTORYTHE MACHINE TOOL SPECIALISTS
Full range of new and used machinery
Haas , VMC, VF-4, 4th Axis
Trens Lathe, SN70C3000, 27” x 120”
Deckel CNC Mill, FP-4A, Equipped
Authorised Pave CNC Wire Dealer
We will buy your surplus machines or complete plants
Deckel Maho VMC, DMC 64V Linear, Fanuc
Hyd-Mech Column Saw, H-16, 16” x 16”
Hyundai-Kia CNC Lathe, SKT-21
GR8Huron Mark IV
Axis 6
Zukron II Micro 8 FC
Page 2 Clue July, 2015
Clue July, 2015 Page 3
PAGE 4 CLUE, July 2015
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: trader@tradermachinery.com ! web: www.tradermachinery.com
BENDERS, HYDRAULIC2-1/2" SOCO, SB-63NCMP (2005), Hyd. Mandrel Type, Touch Screen PLC Ctl
5-1/2" ENERPAC, Hyd. Pipe bender, w/asst’d tooling
BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i
BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC
45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety
50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen
50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis
60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains
70 Ton x 10’ ALLSTEEL, CNC, Automec, Light curtains
70 Ton x 10’ ALLSTEEL, Hyd.
75 Ton x 10’ “NEW” ACCURPRESS, CNC
88 Ton x 8’ AMADA, HDS-8025NT (2008), Servo Hyd. Hybrid CNC
11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System 5000
120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge
130 Ton x 10’ “NEW” ACCURPRESS, CNC
130 Ton x 12’ ACCURPRESS, 2-Axis
130 Ton x 12’ ACCURPRESS, 713012 (1997), Upgraded ETC3000 ctrl
130 Ton x 14’ ACCURPRESS, ETS3000 (2005)
140 Ton x 10’ WYSONG, CNC, Automec
143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid CNC
200 Ton x 12’ “NEW” ACCURPRESS, CNC
225 Ton x 10’ CINCINNATI, Mech.
235 Ton x 12’ ACCURPRESS, Accell 523512 (2006), Mint!, Fully Loaded
250 Ton x 12’ “NEW” ACCURPRESS, CNC
300 Ton x 10’ CINCINNATI, Hydraulic
DRILLS, COLUMN & BENCH1-3/8"cap “New” DRILLMASTER, Z5035, Geared Head
DRILLS, RADIAL3’ arm “New” TONE FAN, RD-900
3’ Arm SUNLIKE, 1500rpm, w/work table
9’arm SHENYANG, Box table
GRINDERS, CYLINDRICAL5"x 13" JONES & SHIPMAN, 1212E
GRINDERS, SURFACE, RECIPROC6" x 18" “New” KENT, KGS-200
8"x 20" YOUIL (1998), fully-auto, Electro-Mag Chk
12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB
20"x 13’ SNOW, Hydraulic
IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle
LASERS2600 Watt TRUMPF, L2530 (1999), 50"x 100", Siemens 840D, Dual pallet
3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’
3200 Watt TRUMPF, Lasercell, 5-Axis
4000 Watt AMADA, FO3015 (2002), 5’ X 10’, w/Shuttle table
LATHES, ENGINE12" x 40" “New” MORTON, F1900-AEG (2001), Single Phase
18" x 60" “New” POWERTURN, 460
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!
OKUMA, Space Turn LB3000 EX/BB/MY (2012), Live mill, Y-axis, Tooling, OSP-P200LA
HAAS, TL-25, Sub-Spdl, 10"Chk, 25"Sw.
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar cap
MORI SEIKI, SL150S (1997)
MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y Axis Milling, 10"Chk, Live holders
MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill cap
OKUMA, LT25M (2001), Twin spindle, Twin turret, Chip conveyor, 12’ LNS Barfeeder
MORI SEIKI, NL3000MC/700 (2010), MSX850 Ctrl, C-Axis, Live mill cap, 15" 3-Jaw
HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore
HARDINGE, CHNC II SP, Fanuc 14"Sw., 12.5"ctrs, 5000rpm, 10hp
17"x 43", ROMI, M17 (2007), Fanuc 21i, 8"Chk
HYUNDAI, SKT21 (2006), Fanuc Control, 21.7"Swing, 16.1" turn length
22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens 840D, 16" Chk.
24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens 840D, 16” Chk.
MACHINING CTRS, HORZTOYODA, FH100 (1989), Twin Pallet
MAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 control
OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000
HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!
MACHINING CTRS, VERTLAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta CNC Control
MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpm
MILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 control
HAAS, VF3 (2000), X-40" Y-20" Z-25"
TOPWELL, TW60-MCV-50 (2002), X-60" Y-30" Z-28", Anilam 5300
LEADWELL, MCV-1650 (2005), X-65" Y-33" Z-28", Fanuc 18iMB
DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5", Fanuc O-MC
MILLS, VERTICAL9" x 49" "NEW"MAGNUM-CUT, VM-2V, 3hp
10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp
12"x 51" TOS, FNK2R (2003), DRO, P/F Allways, Vari-Speed
12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S
NOTCHING MACHINES5/32" x 8-7/8" x 8-7/8" "NEW" BOSCHERT, Hydraulic
1/4"x 8.6"x 8.6" EUROMAC, Hyd. Notcher w/Bending Attachment
PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II
PRESSES, OBI80 Ton ROUSSELLE, 8B-48, 48” x 22” Bed, OBI
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed
PRESSES, STRAIGHT SIDE800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like New!
PUNCHES, SINGLE STATION25 Ton PIERCE-ALL
60 Ton FABMASTER (2011), Like new
PUNCHES, TURRET22 Ton AMADA, Vipros 255 (2000)
25 Ton TRUMPF, TC500/1300, 50"x 100"
30 Ton EUROMAC, CX1250/30 (2000), CNC
33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I
ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic
2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV
SANDERS24" TIMESAVER, Series 2100 (2008), Wet
SAWS, BAND, HORIZONTAL10"x 15""NEW" ACRA, Speeder FHBS-250V
12"x 14"RAM, Semi-Auto
SHEARS, POWER SQUARING1/4"x 10’ "NEW" ACCURSHEAR, Hyd.
1/4"x 10’ HACO, TS3006 (2001)
3/8"x 8’ ACCURSHEAR (1998), Hydraulic
MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65
Barfeeds LNS, Servo S2 & S3, Late models, w/Remote pendant, Excellent
Magazine Barfeeder 4’ SAMECA, MBF1000 (1998), Auto Loading
Gundrill 3/4" x 30" ELDORADO
Honing Machine SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet
Insertion Press 8 Ton, HAEGER
Insertion Press 8 Ton, PEMSERTER, Series 2000 (2002), PLC control
Sinker EDM AGIETRON, Advance 2, X-11.8" Y-9.8" Z-9.8"
Spot Welder 20 KVA, SIP
Tool Presetter TRUMPF (2005), Multi-Set ITM
Wire EDM, CNC AGIECUT, Classic 2S (2002), X-13.7" Y-9.8" Z-10"
Wire Machinery "NEW" METALEX, WT250, Wire Nibbler
NEW
Page 4 Clue July, 2015
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com
NEW ACCURPRESS MODELSCNC PRESS BRAKES
Mori Seiki, NL-2500Y/700 & NL-3000Y/1250, 2006/07, Turning, Mill/Drill Center
OKUMA, LT25M, 2001, 7-Axis, Twin Spindle, Twin Turret, CNC lathe, W/ Live Milling
See Demos on the highly successful leader in precision forming Accurpress Press Brakes.
TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control
130 Ton x12’, ACCURPRESS, No. 713012,Upgraded ETS 3000 Control
Clue July, 2015 Page 5
Address: 2783 Portland Dr. Oakville ON L6H 6M6 Tel: 905-829-1579 Email: info@smtcl.ca Website: www.smtcl.com www.smtcl.ca
CY-K800B/3000 • Distance Between Centers: 118” • Swing Over Bed: 31.5” • Swing Over Cross Slide: 20.5” • Width of Bed: 23.6” • Spindle Bore: 5” • Spindle Speed: 22-1200rpm • Main Motor: 20HP
CY-K510n/1500, CYK510n/2000 • Distance Between Centers: 59” to 79” • Swing Over Bed: 19.7” • Swing Over Cross Slide: 11.4” • Width of Bed: 15.4” • Spindle Bore: 3.2” • Spindle Speed: 35 – 2500rpm • Main Motor: 10HP
New Arriving Teach-in CNC Lathes With Fagor Control: Fagor 8055i-TC Control, 2-axis drive motor, heat exchanger, full cover door, (10”/16”) 3 jaw chuck, 4-position turret, electric hand wheel, steady rest, follow rest, damping washer, absolute encoder
Special Deal For New Machineries!
New Arriving 3-Axis CNC Turning Center (SCHIESS - German Design): FANUC Oi TD control, α servo spindle motor with manual guide Horizontal 12 position DM servo turret, 1 axial live tool, 1 radial live tool and 10 standard tool holders
VIVA T2Sm/500 • Max Swing Diameter: 22” • Max Cutting Length: 19.3” • Spindle Hole Diameter: 3.5” • Spindle Speed Range: 30-4000 rpm • Main Motor Output Power: 15/18.5 kw
Canada Inc.
VIVA T4Cm/1000 • Max Swing Diameter: 28.3” • Max Cutting Length: 40” • Max Cutting Diameter: 20” • Spindle Speed Range: 30-3000 rpm • Main Motor Output Power: 22/30 kw
Page 6 Clue July, 2015
Page 8 / Steel Marketplace / JULY 2007
�
• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •
VISIT US AT:www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 jc@jordancraigmachinery.comFax: 845-398-0074 www.jordancraigmachinery.com
20 TON TRUMPF TC2020R ROTATION,TURRET PUNCH, 9 STA. ROTATION, 50” X 100”
MFG: 2001, STOCK #10267
175 TON X 12’, ACCURPRESS ADVANTAGE 717512, PRESS BRAKE, ETS3000 3-AXIS,
MFG: 2004, STOCK #10273
187 TON, AMADA, NO. HFE-1704S/7,PRESS BRAKE, OPERATEUR 7-AXIS CNC,
MFG: 2004, STOCK #10166
AMADA FOM2 3015NT LASERMFG:2013, STOCK #10268
88 TON, AMADA HDS8025NT, PRESS BRAKE, MFG:2008 STOCK #10244
143 Ton, AMADA, HDS-1303NT,PRESS BRAKE, AMNC-PC 8-AXIS,
MFG:2005, STOCK #10245
AMADA LC3015F1NT, LASER, 4000 WATT,5’ X 10’, AMS-3015 10 SHELF LOAD/UNLOAD
SYSTEM, MFG:2009 STOCK #10187
AMADA, LC1212A3XL, LASER, 2000 WATT,4’ X 8’, 17,000 HOURS, NEW TURBO BLOWER,
MFG:2004, STOCK #10175
TRUMPF L2030, LASER, 2 KW, 4’ X 10’, MFG:2007, LOW HOURS, STOCK #10237
AMADA FO MII RI 3015, LASER, 4000 WATT,5’ X 10’ ROTARY INDEX,
MFG:2012, STOCK #10229
55 TON, AMADA RG 5020 M2, PRESS BRAKE, AMNC-IS, 82.1” O.A., MFG:2010,
STOCK #10205
33 TON, AMADA, PEGA 345Q, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I, MFG: 1993,
STOCK #10157
Clue July, 2015 Page 7
Page 8 Clue July, 2015
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
Special Package Includes• Fagor 2-Axis DRO• Machine Vise• Clamping Kit
40” x 26” Fagor Control 30” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: sales@powermaster.ca website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
STEVENS MACHINERY SALES INC.2 Royalcrest Road, Etobicoke (Toronto) ON., Canada M9V 2L5 Phone: 416-798-3611 Toll Free: 1-866-798-3611
www.stevensmachine.com email: andrew@stevensmachine.com
NEW AND USED FABRICATING & METALWORKING MACHINERY SALES & SERVICE FOR OVER 38 YEARS
CLOSED O-FRAME FEM DESIGN - SIX (6) AXES - Y, X, (DELTA X), R, Z1, Z2 - FULL LASER GUARDS, SIDE & REAR FENCING - RAM SERVO-DRIVES WITH 2-6 BALL SCREW SPINDLES - AUTO CROWNING OF RAM DRIVES ON LARGER MODELS - FAST ACCELERATION, FAST-DIRECT POSITIONING - LOW MAINTENANCE, NO OIL, PUMPS OR VALVES - AMADA / WILA TOOL HOLDERS AVAILABLE - 575 VOLT ELECTRICS & HYDRO APPROVAL - PNEUMATIC TOOL CLAMPING AVAILABLE - LOW ENERGY CONSUMPTION, QUIET, SAFE - ANGLE ACCURACY TO 0.000039”
SERVO-DRIVEN O-FRAME PRESS BRAKES
- HIGH SPEEDS- SERVO-DRIVEN RAMS- 0.000039” RAM ACCURACY- NO HYDRAULIC TANKS OR OIL- SIMPLE TOUCH SCREEN COLOUR CONTROL- FULL LASER GUARDS, SIDE & REAR FENCING- SAVE ON HYDRO COSTS WITH NO MOTORS RUNNING
C - FRAME MODELS- CONE 900 - 34” x 25 Ton - X,Y,R (3 AXES)- CONE 1300 - 50“ x 50 Ton - X,Y,R (Z1,Z2, X Delta) (3 & 6 AXES)
FINNISH EXPERTISE AT ITS BEST!
CNC TAPONE MACHINES- 1, 2, 3 TAPPING HEADS- BRUSH TABLE FROM 27" X 23" TO 59" X 59"- EACH SPINDLE C/W: PROGRAMMABLE SPEED- 4 AXES CNC WORKS WITH JETCAM SOFTWARE- HIGH SPEEDS, BALL SCREWS, LOW ENERGY- TAPPING CAPACITY FROM M2.5 TO M10
SERVO-DRIVEN C - FRAME PRESS BRAKES
V VI VII VIII IX X XI XII
XIX
XII
IXVIII VII VI
IIIIII
V CoastOne
O - FRAME MODELS- 60’’ BED X 50 TON- 80’’ BED X 67 TON- 100’’ BED X 89 TON- 120’’ BED X 110 TON- 160’’ BED X 166 TON
Clue July, 2015 Page 9
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
Special Package Includes• Fagor 2-Axis DRO• Machine Vise• Clamping Kit
40” x 26” Fagor Control 30” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: sales@powermaster.ca website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
Page 10 Clue July, 2015
7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com sales@dipaolocnc.com
USED MACHINERY
OTHER SERVICES» On-Site spindle taper grinding» Machine tool calibration and metrology» Mechanical, Electrical and CNC field service» Installations and plant moves» Spare parts including exchange programs» Authorized distributor for Heidenhain, Fagor, Fanuc FA, Siemens and Renishaw.» Certified Appraiser on staff» Way Grinding
Subscribe to our mailing list
Vertical LathesBERTHIEZ
SCHIESS
BULLARD
OKUMA + HOWA
62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 407940” table, 55” swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071Man-Au-Trol, 42” table, equipped with side head, from an aerospace facility, gently used, Stock No.4205ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219
Horizontal Lathes“NEW”
“NEW”
MAZAK
RD&D
SAFOP
OKUMAHITACHI
MORI SEIKI
OKUMA+HOWA
SMTCL
DMG
DMG
20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, stock 403920” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, 2 available, stock 4036 and 4037Slant Turn 40N-ATC Millcenter 1000, Fanuc Control64" x 170", sliding bed type gap lathe, 16" hole through spindle, GN10 CNC control, Stock No. 384963" x 236", C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 379115” x 36”, LU-15 CNC Lathe, 1995, Stock No. 358029” swing, Turret Lathe, 6.25” hole through, Stock No. 318327” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 417311” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157HTC2050, 8”x20”, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.CTX-310, 2006, 200mm turning diameter, 330mm swing, 51mm bar diameter, 3000 hrs, glass scales.CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.
Surface & Blanchard GrindersFAVRETTO
ARTER
SHIBAURA
Model No. MG300 2T, Siemens CNC Control, 60” x 120” x 28”, two heads, reconditioned, you won’t find a nicer grinder on the market.Rotary Surface, Horizontal Spindle, Stock No. 3827
48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684
MiscellaneousIEMCA
DANDREA
DO-ALL
AMADA
ARCHDALE
PRATT & WHITNEY
AMERICAN
PFAUTER
FLOOR PLATES
Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock No. 4066
CNC facing head
Horizontal Bandsaw, Model C-916A, Stock No. 3466
Punch Grinder, Stock No. 3463
Granite Table, 150" x 150", Massive!, Stock No. 3418
Radial Drill, Stock No. 4211
Jig Grinder, Model No 20, Pratt and Whitney rotary table,
from an aerospace facility, gently used, Stock No.4215
Radial drill, 5’ arm, 17” column, 5MT spindle taper, power
quill travel, Stock No. 4237
Gear hobber, Model P900 Turbo, 36” max workpiece
diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x
9” long, Auto hob shift, swing away tailstock, change gears,
Stock No. 4253
Various sizes
Machining CentresTOS
LEADWELL
BRIDGEPORT
BOSTOMATIC
12” x 51”, Model FV 25, FAGOR CNC control, box ways, priced to sell, Stock No. 3710
20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453
20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159
32G Graphite VMC, 42K spindle, 4th axis.
Cylindrical GrindersSCHAUDT
B&S13” x 27”, Universal Heavy Duty, Stock No. 3826
10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock No.3825
Horizontal Boring MillsTOS
SCHARMANN
JUARISTI
WD130, 130mm spindle, Floor type boring mill, FAGOR 8055 CNC, 232” x 97” travel, 90” x 84” G&L table, linear scales, under power, Stock No. 4353
125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”
Rotary Table, MGX20, 100” x100” with 60” of infeed travel, new in 2004, hydrostatic rotary axis.
Milling MachinesHECKERT
DARBERT
16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal, Stock No. 3686
9” x 42”, Turret Style mill, Stock No. 3458
Clue July, 2015 Page 11
Page 12 Clue July, 2015
SYLVAIN TREMBLAY MACHINERY
Milling, EAST-LION, with C-TEC Ctrl, 12”x 60”, CNC 3 AXIS, $9,500
TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO
Press Brake, WARCOM, FUTURA, 125TMx4M, CNC 6axis, tooling $37,500
Kone 50TM (2 x 25TM) X 45', Mint Condition
CLEARANCE SALE, MUST BE SOLD
FANUC robot arc mate with 450A LINDE power source, 460V
LVD Shear, Max. Cap. 20' x 1/2'', Back Gauge
AMADA PROMECAM, STPC 200TM-4M, 3 axis-Tooling, $18,500
Contact: Sylvain Tremblay • Cell: (819) 314-4967 • syltrem@machineriest.com
ALL MACHINES
REVISED DOWN
Latest Installation by FERRIC Machinery
Speed Bend 3950x220 press brake atA I Manufacturing, Elmira, ON
A I Manufacturing, a full fabrication shop in Elmira providing customers all over Ontario with metal products, upgraded their press brake division with a new FERRIC-ERMAK Speed Bend Pro 13ft x 242 ton. This custom designed machine will increase the productivity with faster set ups on the ER90 Plus 2D-full 3D control and off line programming software capable of uploading dxf files from parts. The flexibility of the standard 4 axes back gauge and the CNC crowning allows accurate bending with a minimum input from the operator.To contact A I Manufacturing : isaiah@aimfg.ca
www.ferr icmachinery.com
All FERRIC products are sold with installation and training.Local service by our local FERRIC team.
For more information on the FERRIC-ERMAK products visit:
FERRIC Machinery Inc.3980 Chadburn Cres, Mississauga, ONTel: 905-820-3232 sales@ferricmachinery.com
Westside Service Ltd.122 Broxburn Blvd, Lethbridge, AB
Tel: 403-380-5047 westsideservice@telus.net
Clue July, 2015 Page 13
CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: sales@skbraly.com
W W W . S K B R A L Y . C O M
CLUE, July 2010 Page 3
AIR COMPRESSORS
POWER FIST, 10hp 2-stage compressorGARDNER DENVER, Eberda, 15hp compressor
DRILLS
SAALFELD, BS50 Pillar drill, 2" capacityMOLLART, LD4-500 4 spindle gun drill
FACING & CENTERING
SENECA FALLS CNCSENECA FALLS, CS, LO. Swing
GRINDERS
STUDER, S36 CNC, CylindricalOKAMOTO, ACC-618, 6"x 18" HydarulicNICCO, NFG-515HD, 6"x 20" Form grinderTOS, BRH20-02, 12"x 24" Hydraulic surface grinderBROWNE & SHARPE, 12"x 24"HASBERG, FS5 CutterBLANCHARD, 16" Vertical surface grinder
KEYSEATERS
MORRISON Keyseater
LATHES, CNC
DAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisNAKAMURA TOME, TMC-15NAKAMURA TOME, SL-JR
LATHES, ENGINE
LANSING, TAD-FS-650, 53" facing latheNAMSEON, 17"x 55"SOFIA, 18"x 80"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 60"CHIEN YEH, CY560, 22"x 80"
TOS, SN63/2000, 24"x 80"MORANDO, 24"x 120"PBR, TM-300, 24"x 196"CHIEN YEH, CY680, 26"x 60"
MACHINING CTRS
ENSHU, JE30S, HorizontalMORI-SEIKI, NV-5000, Vertical
MILLS, UNIVERSAL
JAFO, FWD 25U, 10"x 50"
MILLS, VERTICAL
FIRST, LC, 9"x 42" 1-1/2TOPWELL, VK 4, 10"x 50"FIRST, LC20VH, 10"x 50" Vert/HorizKAO FONG, 12"x 50" Horz/Vert
PRESSES
PERKINS, 3 Ton, OBIROUSELLE, 2G Deep throat Gap press
SAW
SOCO, MC350 NFA Automatic cut-off saw, non-ferrous
SHEARS, POWER SQUARING
DIACRO, 24"x 16ga Hand shear with standAMADA, M-2560, 1/4"x 8’
TOOLING
WAHLI, MXH 300/200 Tool setterLYNDEX, E348 Elba Tool setter
MISCELLANEOUS
End Finishing Machine, SOCO, EF-PV/52Parts cleaner, HOTSY, 7630Parts cleaner, HOTSY, H20-2836Spot Welder, CANOX, CPMS-20FT 20 KVAThread Rolling Machine, SHENG JIAN, Z28-63Tilting box table, 30"x 24"x 22"
Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS
PAGE 22 CLUE, April 2012
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month
DEADLINE
The deadline for advertising is the dayfollowing the last Wednesday of the month
ADDRESS
343 Smith AveBurlington, ON, L7R 2T9
Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.com
e-mail: clue@cluemachines.com
MUST SELL
Cincinnati 10ga x 10'
Power Squaring Shear
Bliss #21
Punch Press
Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228
Website: www.managingyourassets.com
Alberta
B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15
British Columbia
ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17
Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15
Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21
Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22
Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27
Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10
Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18
Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3
Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26
Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13
Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15
Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1
Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15
Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15
Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15
Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5
S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23
Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4
Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15
TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28
Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15
Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17
Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23
Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15
Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25
Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15
USA
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8
S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25
Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
PAGE 30 CLUE, December 2013
AIR COMPRESSOR
JUN AIR 15 litre 120psi
DRILLS
BUFFALO
ALLEN drill press, 3ph
ARBOGA (G1304) Bench top drill
IMA Gearhead drill
HERBERT 15" 3ph
CINCINNATI BICKFORD 24"
FORK LIFT TRUCKS
TCM 5000 lb Lift truck, side shift, see through
mast.
YALE 5000lb electric, 3 stg mast, side shift
NISSAN 5000lb propane, 3 stg mast, side shift
TCM 10000 lb Propane, 3stge mast
Assorted Pallet Trucks
HYSTER 15000 lb propane
GRINDERS
BALDOR 3/4hp pedestal grinder
BALDOR 2hp 10" double end ped. Grinder
THOR Pedestal grinder
DELTA ROCKWELL 6" belt grinder/sander
JONES & SHIPMAN Surface Grinder 540,
550v, 3ph
BROWN & SHARPE 10"x 24" Cylindrical
LATHES, ENGINE
COLCHESTER (Triumph 2000)
HARRISON 11"x 20"
CHIEN-YEH 14"x 36" 24" gap
TOS (SV18RA) 15"x 60"
MITCHELL 16"x 36"
VOEST 17"x 60"
MILLS
HONEYWELL Light curtains
FIRST (LC-20VSG) w/Readout
EXCELLO (602)
HASCO 9"x 42" R8 taper
FIRST (LC-20VSG) 10"x 51" 40 taper
TOS (FA3AV) 12"x 54" 40 taper
PRESSES
ARBOR (#2)
GREENERD (#3a) Arbor Press
JET (#3) Arbor Press AP3
ALGOMA 50T H Press, 575v, 3ph
BUFFALO 100T H press
ROLLS
B&B 36" x 18ga Hand Rolls
NIAGARA 4’ Initial Power Pinch rolls
SAWS, BAND, HORIZONTAL
CRAFTEX 10" table saw
GREENLEE (1346) 7"x 10" single phase
SAWS, BAND, VERTICAL
RIGID (MS1065LZA) 10" compound mitre saw
REMI-EISLE (JMS300PV) Cold cut saw
HOE JUN (HV400)
CLIPPER (BBC156) 14" Concrete saw
MAKITA 14" Chop saw, single phase
MEP (Rabbit 351) 14" Cold cut saw
DOALL 20"
WILSON 28" Vertical Woodworking band saw
GROB 36" band saw
WELDERS
MILLER (250P) Stick welder
AERCOLOGY’S WELDAIR (WA1000CP)
Smoke eater
THERMAL ARC (PAK 5Xr) Plasma cutter
MILLER (Coolmate 4) Water cooler
ARCWELD (G022263) 230/460/575
Smoke Eater, NEDERMAN
HOBART (300RVS) Mig Welder w/Feeder
LINCOLN (Tig 300/300)
THERMALARC (250 Tigwave)
CANOX Arc Welder
L-TEC Heliarc 250hf plus squarewave
MILLER (Big 50) Diesel welder, 400 amp
MILLER (D302) 3+12 Diesel welder
MEMCO (Stick AC-225) single phase
MISCELLANEOUS
Assorted Transformers
Hydraulic Pump
Industrial Fan, VARY 4’ x 4’
MITUTOYO height gauges, assorted sizes
Wet Soda Blaster 38 x 41 x 38
Assorted Rotary Tables
Mag. Lathe Chuck, ECLIPSE
Assorted Demagnetisers
HILTI (DXA40 driver) w/ XHN date stamp
attachment
Bead Rolling Machine, CMZ7, 114v, single ph.
Pressure Washer, PSC 600v, 3ph
Assorted Measuring Tools
Belt Sander, BROOK HANSEN 6"x 80"
Pipe Vise Stands, (2) PILOT (No.20)
Angle Plates
Torque Wrench, PROTO 600 ft/lbs
Collet sets
Assorted vises
Assorted Chain Hoists
Threading Caddy, RIGID
Magnets, 800-1000kg
Hardness Testers
Pedestal Buffer, CINCINATTI 14"
JET & CM 10T chain falls, 20’ lift
Bore Gauge, SUNNEN (Dial)
Vise, RIGID
RIGID Tooling for threading machine
Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5
www.paulmachinery.com
Page 14 Clue July, 2015
Clue July, 2015 Page 15
B1804 BENDERS, HYDRAULIC
5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
B7000 BRAKES, PRESS
35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical, Hurco
5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,
Crowning, Laser safety, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
55 Ton AMADA, RG 5020 M2 (2010), AMNC-IS, 82.1"O.A.,
Ref# 10205, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
70 Ton x 10’ ALLSTEEL, , CNC, Automec, Light curtains,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
88 Ton AMADA, HDS8025NT (2008), Ref# 10244, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW in
2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
88 Ton x 8’ AMADA, HDS-8025NT (2008), Servo Hyd. Hybrid
CNC, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,
Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
99 Ton DURMA, AD-E 3090 (2007), Delem DA-51 2-Axis, Ref#
10184, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
110 Ton AMADA, HFE 1003S/7 (2000), CNC, 122", Ref#
10144, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic
bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon
2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 23
110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,
CNC Crown, DNC angel prog., (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System
5000, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
123 Ton BAILEIGH, BP-12313NC (2008), Delem 2-Axis,
Installed New 2011, Ref# 10183, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
130 Ton x 12’ ACCURPRESS, , 2-Axis, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
130 Ton x 12’ ACCURPRESS, 713012 (1997), Upgraded
ETC3000 ctrl, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC,
165", Ref# 10214, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
138 Ton AMADA, FBD1253NT (2002), Up-Acting CNC, Ref#
9978, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
143 Ton AMADA, HDS-1303NT (2005), AMNC-PC 8-Axis, Ref#
10245, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
PAGE 16 CLUE, June, 2015
CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222
STEVENS MACHINERY SALES INC. & COASTONEKam-Press Mississauga, ON purchased a new CONE Electronic Press Brake (made by CoastOne Finland) from Stevens Machinery Sales Inc.
This is what Mr. Mario Laquintana had to say about the CONE Electronic Press Brake:“I was totally and completely surprised.Quicker, simpler and easy to program.The accuracy is superb versus a CNC hydraulic brake press.Very happy with the Coastone, great machine”. Mr. Mario Laquintana, Kam Press Metal Products, Mississauga, ON.
Stevens Machinery Sales Inc. 2 Royalcrest Road, Etobicoke (Toronto) ON., Canda M9V 2L5 Phone:416-798-3611 Toll Free:1-866-798-3611www.stevensmachine.com email: andrew@stevensmachine.com
Page 16 Clue July, 2015
CLUE, April 2014 PAGE 17
B7000 BRAKES, PRESS I6200 IRONWORKERS
143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid
CNC, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke
Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
148 Ton x 10’ BYSTRONIC, 3100 x 130, 6 axes back gauge,
Hyd clamping, with tooling, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
150 Ton x 10’ “NEW” FERRIC, Speed Bend 3100x135, XRZ1Z2
back gaug, CNC crown, 2-3D prog. off line software, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 23
160 Ton x 3200mm WUXI, WC 67K, New 2012, Delham DA41
2-Axis CNC Control, Never used, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
160 Ton x 13.5’ NISSHINBO, 4100 x 150, XRZ1Z2, CNC
crown, 2D graphic control, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
165 Ton x 12’ HACO, ERM 36150, X-39’, Man Crown, BC55 2D
graphic, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),
ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
187 Ton AMADA, HFE-1704S/7 (2004), Operateur 7-Axis CNC,
Ref# 10166, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2,
Crowning, Clamping, Ref# 10013, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
193 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
225 Ton x 10’ CINCINNATI, , Mech., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
242 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x220, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
245 Ton x 14’ HACO, ERM 42225, X back gauge Man Crown,
BC40 Angle prog., (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69
6-axis, Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69
6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
300 Ton x 10’ CINCINNATI, , Hydraulic, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
350 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x350, XR
Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec 8805,
Ref# 10242, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
D5700 DRILLS, RADIAL
36" x 4MT TONE FAN, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
64" x 5MT MAS, VO50, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
64" x 5MT TOS, VR5, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric,
Gas, Oil, Propane, for all purposes, (Park Thermal
International Tel: 905-877-5254, Fax: 905-877-6205)
G8025 GRINDERS, SURFACE, RECIPROC
8"x 24" TOS, BRH20, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
G9030 GRINDERS, MISCELLANEOUS
DECKEL, SO, End Mill, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
HEINMAN, , Cutter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
I6200 IRONWORKERS
50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
Trans-Canada Liquidations (TCL) has been in business since 1958 and offers the following services:
AUCTION SALES: We conduct auction sales right across Canada and have facilities in the USA. We will purchase any type of manufacturing company for cash or sell on a commission basis.APPRAISALS: We have certified appraisers on staff who can appraise all types of machinery and equipment; woodworking, printing, chemicals, fabricating, tool & die, construction, aircraft, foundries, etc...(in the strictest confidence).LIQUIDATIONS: We are able to conduct all types of Liquidation Sales, and can show you where more money can be realized. Complete liquidation is assured; our efficient organization enables us to handle numerous sales a week.MERGERS & ACQUISITIONS: There is a separate department for Mergers and Acquisitions, and we have been very successful in buying and selling both ongoing and bankrupt companies for clients. We represent various groups interested in purchasing manufacturing businesses.Our clients are Federal and Provincial Governments, Financial Institutions, Chartered Accountants, Trustees in Bankruptcies and Private Corporations.No proposition is too large to arouse our interest. The next time you have a plant with an uncertain future... get in touch with TCL for fast action.
TCL Asset Group Inc.
LET US WORK FOR YOU
4610 Dufferin Street, Suite 209Toronto, Ontario, Canada M3H 5S4www.ManagingYourAssets.com
Contact: NORM JACOBSTel: 416-736-1367 or Fax: 416-736-4159
Email: njacobs@managingyourassets.com
WE APPRAISE • WE LIQUIDATE • WE AUCTION
Clue July, 2015 Page 17
I6200 IRONWORKERS L3000 LATHES, ENGINE
PAGE 18 CLUE, April 2014
60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
75 Ton KINGSLAND, 75XS, Dual operator, 5 stations, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 23
80 Ton “NEW” FERRIC, HIW 80 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
100 Ton “NEW” FERRIC, HIW 100 DC, Dual operator, 5
stations, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
125 Ton “NEW” FERRIC, HIW 125 DC, Dual operator, 5
stations, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
L0850 LASERS
WUHAN, Goldel, New 2012, 650 Watts Yag lamp laser, Gantry
design, Never used, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
AMADA, FOM2 3015NT (2013), Ref# 10268, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
AMADA, Altair LCV 3015 (1997), Fanuc 16L, 5’x 10’, Only 18,
883 Hours, Ref# 10270, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
1500 Watt AMADA, LC1212XL (1995), 4’ x 8’, Rebuilt 2012,
Ref# 10251, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000 hours,
New turbo blower, Ref# 10175, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt TRUMPF, L2510 (2006), Loan/Unload cell, Ref#
10246, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref# 10255,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
2000 Watt AMADA, Pulsar LC1212XLA2 (1995), Swing away
clamps, Approx. 29,000hrs, Ref# 10243, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#
9955, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
2KW TRUMPF, L2030 (2007), 4’x 10’, Low hours, Ref# 10237,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
3000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483
Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:
2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
4000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
4000 Watt AMADA, LC3015F1NT (2009), 5’x 10’, AMS-3015 10
Shelf Load/Unload System, Ref# 10187, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
4000 Watt AMADA, Gemini FO-3015NT (2007), 5’x 10’, Approx.
40,000hrs, Ref# 10249, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Theta (2008), 5-AXIS, LC3015CII, No
rotary chk, Ref# 10248, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual
Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual
Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,
Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#
10123, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary
Index, Ref# 10229, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
5000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 23
5000 Watt TRUMPF, Trulaser 5040 (2007), 6’x 13’, Ref# 10241,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
5000 Watt TRUMPF, Trulaser (2012), 5’x 10’, 10000 Laser On
& 6000 Beam On, Ref# 10278, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#
10072, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
6000 Watt BYSTRONIC, BYSTARII 3015-2 (2007), 5’x 10’,
Bytrans Automation, Almos new Res., Ref# 10235, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#
10114, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
L3000 LATHES, ENGINE
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3
& 4 jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1-589 Middle�eld Rd, Toronto ON M1V 4Y6Phone: 416-291-9499 Fax: 416-291-4990Email: peter@compumachine.caWeb: www.compumachine.ca
Toshiba BTD 9R CNC Boring Mill with Rotary table
Great capacity low price20hp, Vert Travel Of Headstock, Y-39.4",X-48", Spindle Travel, W-20" SaddleTravel Z-35.4", Built-In Pwr Rotary Table35.4" x 41.3", Capacity 5,510.lb
Toshiba BTD 11B P4 CNC Boring Mill Plain Table
Big Capacity 98" table low priceX-98”, Y-59”, Z-62”, W-24”, Table size 98”x 59”, Table load Capacity 17,000lb, Spindle diameter 4.3”, Spindle speeds 1600rpm, Spindle motor 20/30hp
Toshiba TMC 13-3 CNC, VBM w/Live spindle and C axis
Table Diameter: 49.2", Max Swing: 63", Max. Turning Dia: 63", Max Turning Height: 49.2", Max Table load – turning – (milling) 22,000 LBS (15,000LBS), Table RPM 3~250, Table Motor 40/50 HP, Cross Rail Stroke (4) positions 19.7”- 49.2”. ATC 24 Live spindle:, 20 HP (1,500 RPM)New Fanuc 0i-TD CNC Control with warranty.TOSHIBA SALE
CNC Machining Centers2001 Deckel Maho Gildemeister (DMG) DMU-70 Evolution 5-Axis
VMC with Heidenhain TNC 430 Control1990 Mazak VQC 15/40 with Mazatrol M32, Table 16” X 35”, X-22”,
Y-16.1”, Z-15”, 6000rpm2000 Daewoo Mynx 500 Fanuc 21-M Control, Table size 49”x20”
X-40”, Y-20”, Z-20” 6000rpm ATC 241992 Hermle UWF 851 H CNC Univ Milling Mach, Heidenhain 415
CNC Control, X-600mm Y-450mm Z-400mm, 20-4500rpm1993 Enshu 500H CNC Horiz Mach Center Fanuc 16-M Ctrl, Two
Pallet auto changer 20” pallets, X-28” Y-25.6” Z-23.6”, 20-6000rpmCNC Lathes1981 VDF Boehringer 800 3m centers Fanuc 6T Control1981 VDF Boehringer 820 3m centers Fanuc 6T Control1983 VDF Boehringer 800 3m centers Fanuc 0T ControlCNC Boring Mills1996 Toshiba BTD 110 R16 2m x axis, 1500mm Y axis. Rotary
table 55”x63”, ATC 38 Tosnuc 888 ControlBoring Mills2001 Tos W100A Horizontal with Heidenhain 3 axis DRO
Union Floor Type Horizontal, BFP 125 Accurite 3 axis DRO Spindle Diameter 5”, 12 Ton Rotary table and floor platesEngine lathesMerli Clover 24” swing, 80” centersGiana Torgim. 32” swing, 140” centers 15” chuckChien Yeh 14” swing 60” centers 8” chuckMilling machines Dah- Lih: DL-VHRU-G2, 10” x 48” table, 40 taper (vert. & horiz.),
133-2160 rpm (belt)- vert., 50- 750 rpm (belt)- horiz.. c/w x- axis power feedPresses60 Ton Hydraulic H frame pressFork liftsElectric Lift- Truck: Clark; E-C 500, 5000 lb. capacity, 188” lift. c/w battery charger.GrindersKarstens CNC Universal Cylindrical Grinder, 12” magnetic chuck,
24” swing, 60” centers, Universal Swivel grinding wheel, George Karstens CNC Control
Page 18 Clue July, 2015
L3000 LATHES, ENGINE M1659 MILLS, UNIVERSAL
18"x 80" DARBERT, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
22"x 60" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
22"x 80" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
26"x 64" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
SHENYANG, CW 6263B, 26" swing x 120" centers, Mint cond.,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
L6135 LATHES, N/C & CNC
HAAS, TL-25, Sub-Spdl, 10"Chk, 25"Sw., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2"
Bar cap, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MORI SEIKI, SL150S (1997), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y
Axis Milling, 10"Chk, Live holders, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live
holders, C&Y Mill cap, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
OKUMA, LT25M (2001), Twin spindle, Twin turret, Chip
conveyor, 12’ LNS Barfeeder, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MORI SEIKI, NL3000MC/700 (2010), MSX850 Ctrl, C-Axis, Live
mill cap, 15" 3-Jaw, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed
20", Mint cond., (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
HARDINGE, CHNC II SP, Fanuc 14"Sw., 12.5"ctrs, 5000rpm,
10hp, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
HYUNDAI, SKT21 (2006), Fanuc Control, 21.7"Swing, 16.1"
turn length, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens
840D, 16" Chk., (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens
840D, 16” Chk., (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0130 MACHINING CTRS, HORZ
OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0185 MACHINING CTRS, VERT
LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta
CNC Control, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9",
Ref# 9854, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5
CNC, 13,000 rpm, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
HAAS, VF3 (2000), X-40" Y-20" Z-25", (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
FADAL, VMC 4020 HT CNC (2005), Table size 48"x 20", X-40"
Y-20" Z-28", Spindle Taper CAT40, $37,000, (ZR Tool Inc.
Tel: 905-836-0590, Fax: 905-836-0577)
TOPWELL, TW60-MCV-50 (2002), X-60" Y-30" Z-28", Anilam
5300, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5",
Fanuc O-MC, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0850 MEASURING MACHINES
SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
M1550 MILLS, CNC
JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
M1659 MILLS, UNIVERSAL
10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery
Ltd Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
CLUE, April 2014 PAGE 19
British Columbia
Modern Tool (BC) Ltd, Port Coquitlam (Pam)..........................................604-472-1444............604-472-1455............21
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ......................................519-485-7089............519-485-7368............18
Compumachine Canada, Toronto (Peter)................................................416-291-9499............416-291-4990............18
DiPaolo Machine Tools Ltd., Mississauga (Nelson).................................905-676-9265............905-676-9436............10
Fabtec Machine Tool Solutions Inc, Oakville (Raj) ..................................905-469-1586............905-469-3054............17
Ferric Machinery Inc, Mississauga (Koen) ..............................................877-337-7424............905-820-3234............23
Havlik Int’l Machinery, Cambridge (John)................................................519-624-6240............519-624-4119............22
L S Walker Machine Tools Inc, Milton (Chris) ..........................................905-876-0890............905-876-1959............15
Machine Solutions Inc., Guelph (Andrew) ...............................................416-220-5910................................................3
Park Thermal International, Georgetown (Sales) ....................................905-877-5254............905-877-6205............18
Paul Machinery, Burlington (Paul) ...........................................................905-634-8442............905-681-6940............14
Phase Quest, Mississauga (Harold)........................................................416-578-5399............416-753-7209............18
Powermaster Machinery Ltd, Mississauga (Peter) ..................................905-624-9327............905-624-8591..............8
S K Braly Machinery Inc, Mississauga (Steve)........................................905-793-8080............905-793-2190............14
SMTCL Canada Inc., Oakville (Merry) ....................................................905-829-1579............905-829-8692..............6
Stevens Machinery Sales (2005) Inc, Toronto (Andrew) .........................416-798-3611............416-798-8439..............9
TOS Trade Canada Inc., Milton (Marian) ................................................905-878-0888............905-878-9022..............1
Trader Machinery Inc, Concord (Jonathan) .............................................905-669-7507............905-669-7512..............4
ZR Tool Inc., Newmarket (Zakariah)........................................................905-836-0590............905-836-0577............18
Quebec
Machinerie Gilles Lupien, Drummondville (Gilles)...................................819-478-5266............819-478-5266............18
Machinery S. Tremblay, Drummondville (Sylvain) ...................................819-477-6677............819-477-6466............13
Seguin Machinery Ltd, Vaudreuil-Dorion (Gerry).....................................514-935-3531............514-932-4459..............2
USA
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan).........................845-398-0073............845-398-0074..............7
Franke CNC, LLC., Germantown, WI (York) ...........................................262-888-3748............york@yfranke.com....24
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
Clue July, 2015 Page 19
N5230 NOTCHING MACHINES
(NEW) BOSCHERT, , 5/32" x 8-7/8" x 8-7/8", Hydraulic, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
1/4"x 8.6"x 8.6" EUROMAC, , Hyd. Notcher w/Bending
Attachment, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 23
O7397 OVENS
New & Reconditioned , Powered by Electric, Gas, Oil, Propane,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P2135 PLASMA CUTTING MACHINES
100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC
plasma, Metalmaster II, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P6100 PRESSES, OBI
60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x
36"bed, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable
Stroke Length, Command stamp ctls, (Brighton Machinery
Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch
w/air assist, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
P7100 PRESSES, STRAIGHT SIDE
800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,
20-40spm, Like New!, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9150 PUNCHES, SINGLE STATION
25 Ton PIERCE-ALL, , (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
60 Ton FABMASTER, (2011), Like new, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9275 PUNCHES, TURRET
19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#
9812, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,
Ref# 9851, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
20 Ton TRUMPF, TC2020R Rotation (2001), 19 Sta. Rotation,
50"x 100", Ref# 10267, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW
Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 2510 King (1999), Fanuc 18P, Ref#
10172, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
22 Ton FINN POWER, F5-20 (2000), 60"x 80", 20 Station,
Thick Style, Ref# 10266, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,
Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31 Sta., 3A/I,
Ref# 10124, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, EM2510NT (2004), AMNC NT CNC, 50"x 100",
Servo driven, Ref# 10220, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 255 (2000), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
23 Ton STRIPPIT, 1000XP20 (2000), Fanuc OP, Thick turret,
Ref# 10221, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
25 Ton TRUMPF, TC5000R-1600 (2005), New linear amplifier,
14,039hrs, Ref# 10159, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &
PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 357 (1985), Fanuc 6M, 58 Sta, 2 A/I,
Ref# 10007, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4A/I,
Ref# 10250, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf Loader,
Unload Conveyor, Ref# 10269, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton NISSHINBO, HIQ1250PAL-510T (2000), 37 Station
Thick Turret, 3 A/I, Ref# 10212, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton MURATEC WIEDEMANN, 3046A (2000), Fanuc 18-iP,
Ref# 9690, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
N5230 NOTCHING MACHINES P9275 PUNCHES, TURRET
PAGE 22 CLUE, June, 2015
OvensFor Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Numerous Sizes Available
Call: 905-702-4644
STEVENS MACHINERY SALES INC.NEW AND USED FABRICATING & METALWORKING MACHINERY SALES & SERVICES FOR OVER 38 YEARS
2 Royalcrest Road, Etobicoke (Toronto) ON, Canada M9V 2L5 Phone: 416-798-3611 Toll Free: 1-866-798-3611www.stevensmachine.com email: andrew@stevensmachine.com
SERIES 4The press is totally pneumatic providing 6 tons of force and has a 45.7 cm / 18" throat depth which provides clearance for a variety of chassis configurations.It is designed to install self-clinching fasteners in size M2 / #0 thru M10 / 3/8" in steel, and sizes up to M12 / 1/2" in aluminum panels and circuit boards.
NEWSTANDARDFEATURES
Stroke Counter
Laser Pointer
Lockable Tool/Accessories Storage
Cabinet
● Insertion force adjustable from 4.5 to 53.4 kN 1000 lbs. to 6 tons.● Pneumatic power for speed, consistency, and simple operation. Requires shop air only.● Integral point-of-operation safety.● Large parts tray with dividers.● Rapid tooling changeover, perfect for short production runs.● Laser pointer, stroke counter, and lockable cabinet for tools and accessories storage.● One-year parts warranty and two-year limited warranty on pneumatic components.
FEATURES AND BENEFITS● Job search & recall mode allows operators to reference 300 stored jobs and return to previous jobs quickly and easily.● PLC ready accommodates custom programs.● Cast aluminum bowl with epoxy coating handles larger parts and performs quietly.● A wide feeder track increases fastener-feeding rates; the robust shuttle support design improves small-fastener tooling.● A large touch-screen and graphics are operator-friendly.● The press is Ethernet capable and expandable to intercase with data collections systems, production management systems, and off-site troubleshooting systems.● Adjustable ram stroke distance control in manual and bottom feed nut mode.● Real-time installation force feedback displayed on screen.● Fastener and batch counters.● Descriptive screen alerts for operating errors.● Smart dwell and force verification.● Self-diagnostic system lets operator work with increased speed, accuracy, and confidence.● LightStream® Operator Safety Systems provides continuous operator and workpiece protection.● Color-coated tooling for quick changeover.
WITH AUTOMATIC FEED
® ®
● Pneumatic power for speed, consistency, and simple operation.● Uses the same tooling components as the Series 2000 and Series 3000 presses.● Automatically installs nuts, studs, and standoffs from M2.5 to M6 / #2-56 to 1/4".● Pneumatic and PLC logic control systems.● Touch-screen for operator friendly operation.● Vibratory feeder bowl for automatic fastener feeding.● Integral point-of-operation safety.● Insertion force adjustable from 1.8 to 53.4 kN / 400 to 12,000 lbs.● Laser pointer, stroke counter, and lockable cabinet for tools and accessories storage.
™®
The PENSERTER Series 4 press with automatic feed provides 6 tons of force and has a 45.7cm / 18" throat depth which provides clearance for a varietyof chasis configurations. It is designed to install self-clinching nuts, studs, and standoffs in sizes M2.5 to M6 / #2-56 to 1/4".
SERIES 4 SERIES 2000This automatic fastener-installation press system incorporates upgraded operating features and expansion capabilities topromote streamlined job productivity and quality. The press offers the idealtechnology to install all types of self-clinching fasteners rapidly, reliably, and permanently in thin metal plate.
FEATURES AND BENEFITSFEATURES AND BENEFITS
®® ® ®®®
Page 20 Clue July, 2015
CLUE, May 2010 PAGE 21
P9275 PUNCHES, TURRET Z9000 MISCELLANEOUS
33 Ton AMADA, Apelio III 357V (1998), Fanuc 16L CNC Ctrl,
1500 Watt Laser, Ref# 10274, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 368 King II (2000), Fanuc 18P, CNC
control, Ref# 10173, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 345Q (1993), Fanuc 04PC, 58 Sta, 2 A/I,
Ref# 10157, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton AMADA, Coma 567 (1984), Fanuc 6M, 58 Sta. 2 A/I,
Ref# 10257, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
R4704 ROLLS, ANGLE BENDING
2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,
Hydraulic, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK60, Mod. Rolls,
DRO, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.
Side guides, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
R5603 ROLLS, PLATE BENDING
3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending
roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending
roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.
Bending roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
5/16"x 8’ “NEW” FERRIC, , AHS plate roll, 4 roll machine, DRO,
(Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
NANTONG, WIIJ-10, Max. Cap 3/8" x 6’, New 2012, Never
used, Roll speed 4m/min, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
S0690 SAWS, BAND, VERTICAL
24" STARTRITE, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
S0948 SAWS, MISCELLANEOUS
4"x 10" ELUMATEC, , Fully Automatic Circular Saw,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
S4105 SHEARS, POWER SQUARING
1/4"x 10’ “NEW” ACCURSHEAR, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1/4"x 10’ HACO, HSLX 3006, Mot. CNC back gauge, auto
gap-angle, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back
gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
1/4"x 10’ HACO, TS3006 (2001), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back
gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 23
W0990 WELDERS
MOTOMAN, Welding Robot, New 2012, w/NX Control, Miller
Auto-300, Never used, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
W3054 WELDERS, SPOT
20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
Z9000 MISCELLANEOUS
Transformers 5 KVA to 1000 KVA, Large Assortment of used,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
LNS, Barfeeds, Servo S2 & S3, Late models, w/Remote
pendant, Excellent, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
LYNDEY, , Tool Presetter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
WAHLI, , Tool Presetter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 8
SUNNEN, MBB-1650, Manual Honing Machine, Asst’d Tooling &
Cabinet, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
TRUMPF, (2005), Multi-Set ITM Tool Presetter, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
8 Ton PEMSERTER, Series 2000 (2002), PLC control, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
MODERN TOOL BC LTD.
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
DURMA AD-R37175 CNC Hydraulic Press Brake
HYD-MECH S-20A IIIAutomatic Band-Saw
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC
Service & Parts Sales | Toll-Free: 1-800-717-1440
SCOTCHMAN 6509-24MHydraulic Ironworker
DURMA PBH-180Profile Bending Machine
Clue July, 2015 Page 21
Page 22 Clue July, 2015
• Table size ranging from 2500 to 6000 mm • Machines large and heavy workpieces • High efficient machining • Rigid table bearing using hydro-static guiding principles • Precise table positioning (C-axis) and rotary tool drive with high power output • Siemens or Fanuc Control systems • Can be equipped to use high-pressure coolant
• High rigidity and stability • Functional design for easy maintenance • Short delivery time from manufacturer • Siemens or Fanuc control systems • Can be equipped with table positioning and rotary tool drive • Automatic exchange of turning tools and rotary tools • Ram designed for efficient and precise machining • Variable height of the working area • Possibility to perform high-pressure through tool coolant
Clue July, 2015 Page 23
Your Production Matters To Us
PROFILE ROLLS
PLATE ROLLS
PRESS BRAKES
FIBER LASER
PUNCH PRESS
PLASMA MACHINE
SHEARS
We offer innovative solutions to increase your productivity
ONTARIO - EASTERN CANADA3980 Chadburn CrescentMississauga, ON L5L 3X4Tel: 905-820-3232Fax: 905-820-3234
WESTERN CANADAWestside Service Ltd4406-58 St. SouthLethbridge, AB T1K7E2Tel: 403-380-5047Fax: 403-380-5048
FLEXIBLE COIL PUNCHING LINES
Quality | Service | Value | www.ferricmachinery.com
M A C H I N E R Y
899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765
Fax: 905-917-0222
Page 24 Clue July, 2015
FRANKE CNC, LLC.
A Franke Family Tradition Since 1981
Specialists in Used German & Swiss 5-Axis Machining Centers
INSPECT UNDER POWER ON OUR FLOOR!
Franke CNC LLC.N112 W16298 Mequon Road
Germantown, WI 53022P: 262-888-3748
www.yfranke.com • york@yfranke.com
View complete details and request a quote for these machines on our website.
Stocking Dealer1998 KELLENBERGER UR 175/1000 Kel-Varia CNC Universal Cylindri-cal Grinder, KELCO 90, Z1,150 mm, CNC Controlled B-Axis, Internal Attachment, Movomatic Gauging (064068)
2002 DECKEL MAHO DMG-DMC64V Full 5-Axis VMC, TNC 530, X640mm Y600mm Z500mm, 12,000 rpm, 19 kW, 30 ATC, 580 PSI CTS, Chip Conveyor, Laser TLM, Probe (063980)
2008 DECKEL MAHO DMG-HSC 105 linear Full 5-Axis VMC, TNC 530, X1,050mm Y800mm Z560mm, 28,000 rpm, 55 kW, 120 ATC, 580 PSI CTS, Chip Conveyor, Laser TLM, Probe (064040)
1992 HERMLE UWF 600 3-Axis Uni-versal CNC Mill, TNC 355, Manual Swivel Milling Head, X320mm Y280mm Z350mm, 6,000 rpm, CAT 40, Manual Quill, 600 original hours, (063832)
2000 DECKEL MAHO DMG-DMU 50 eVolution Full 5-Axis VMC, Mill-plus, X500mm Y420mm Z380mm, 18,000 rpm, 35 kW, 60 ATC, 580 PSI CTS, Chip Conveyor, Laser TLM (064057)
2007 MIKRON HSM600U, Full 5-Axis VMC, TNC 530, X800mm Y600mm Z500mm, 36,000 rpm, 60 ATC, 7 x UCP Pallets, Chip Conveyor, Laser TLM, Probe, (064064)
2009 MIKRON HPM800U HD, Full 5-Axis VMC, TNC 530, X800mm Y800mm Z550mm, 20,000 rpm, 60 ATC, Trunnion Table, 70 bar CTS, Chip Conveyor, Laser TLM, Probe (064071)
1998 HERMLE C800U, Full 5-Axis VMC, TNC 430, X800mm Y600mm Z500mm, 15,000 rpm, 30 ATC, Trunnion Table, Tool Measuring (064067)
1990 HERMLE UWF 1000 3-Axis Uni-versal CNC Mill, TNC 155, Manual Swivel Head, X700mm Y550mm Z500mm, 3,150 rpm, CAT 40, 1,000 mm X 500 mm Table, Manual Quill, $5,500.00 CAD (063993)
2007 MIKRON HSM400U, Full 5-Axis VMC, TNC 530, X400mm Y450mm Z350mm, 42,000 rpm, 36 ATC, 18 x Macro Magnum Pallets, Chip Conveyor, Laser TLM, Probe (064069)
top related