coim s.r.l. - presezzi extrusion group presezzi extrusion group the creation of the presezzi...
Post on 10-Mar-2018
230 Views
Preview:
TRANSCRIPT
1
2
3
Coim s.r.l.Index
2. Coim s.r.l.
3. Presezzi Extrusion Group
5. Engineering & Production
Project
Automation
Research and Development
Start Up
7. Products
Gas Fired-Billet Heaters
Log Heating Furnaces + Hot Log Shear / Hot Saw
Annealing and Heat Treatment Furnaces
“Turn Key” Fully Automatic Vertical Storages for billets and logs, with Data Management System
14. Service
15. Thanks to Our Customers
16. Contacts
4
COIM is world leader in designing and manufacturing Gas-Fired Billet Heaters for the extrusion of
Copper, Brass and Aluminum.
Since 1978 COIM means worldwide excellence and expertise for the most important extruders.
Our range of products includes Special Furnaces for Annealing and Heat Treatment of extruded
products and tailor-made Automatic Storages for billets.
Coim s.r.l.Gas-fired Billet Heaters - Annealing Furnaces
In 1978, some metallurgical technicians from the
district of Brescia - Italy (one of the main worldwide)
pool their experience to design and build furnaces and
machines for the non-ferrous extrusion industries.
In the 80S, COIM emerges and specializes in the
particular niche market of gas fired heaters and
furnaces for preheating and heat treatment of
copper, aluminum and relative alloys, developing and
improving the design and construction of energy
efficient furnaces.
In the 90S, COIM undertakes a major expansion,
coming to cover much of the Italian market furnaces
for brass billets and winning the European market
(in particular in Germany).
From 2000 the company enthusiastically espouses the
philosophy of the founders and helps to further accentuate
the distinctive features of COIM products: top quality
and energy efficiency, extreme customization, fast and
efficacious after sales service, expanding the activity to
emerging markets, such as EAST EUROPE and FAR EAST
ASIA.
5
Presezzi Extrusion Group
The creation of the Presezzi Extrusion Group now means that customers can entrust all their extrusion requirements to a single, consolidated industrial reality, whose management dedicates itself to a constant technological growth, supported by the continuous, highly qualifiedactivities in its research and development department.
Our objectives:
the highest possible level of technical specialization in the field
the utmost flexibility in the supply of complete turn-key installations as well as standalone units
perfect synergy between the realities of the production and service departments within the group;
being considered as a candidate as the main contractor in order to simplify the handling of financial matters for the customer as well asensuring punctual delivery for machinery and complete plants;
the capacity to listen to our customers has been one of the main priorities of the group over the years and has enabled us to fulfill the most widespread and varied requirements by customizing, when required, any type of installation to raise the productive standards and final results of the supply.
Our life for perfect extrusion
research and development: one of the most important objectives for investments within the group, involving all the best technical and design resources and which has been made the principal objective for all our customers: energy savings, complete software solutions and programs for handling the production process, excellent quality of the finished extruded product as well as a reduction in overheads;
6
The Group
Automatic wrapping linesAdhesive film applicationBox preparationStrapping linesPacking line for PVCComplete handling and logistics solutionsAutomatic Storage system for dies, bundle and baskets
Gas-fired billet heaters aluminum, hard alloys, brass, copperand copper alloysHot logs shears for aluminum logsHot log saws for aluminum logsHeat treatment furnaces (batch or continuous) for bars, rods and tubesAutomatic handling machines and storages for billets and logs
Complete Extrusion LinesTurn key main contractorExtrusion PressesAluminium, Hard Alloy, Copper and Brass, Shaped profiles, solid profiles, rods and hollow shaped profiles. Scalper systemBillets DescalerIntensive coolingTooling press spare partRevamping of existing pressRevamping of existing extrusion plant
7
Engineering & ProductionEach project we undertake is a journey to be followed with attention, dedication and professionalism.
We take great care to all the construction phases, from technical specifications to full commissioning, to best repay our customers’ faith in us.
Coim is located in the heart of one of the most advanced industrial areas in Europe for metal processing, an excellent site that boasts a high reputation in industrial machine technology.
Project
All projects within the group are initiated and developed by our widely experienced and highly qualified engineering department using the latest generation of innovative 3D design systems to ensure the utmost quality at each and every stage of the design process.
Every project carried by the group out is UNIQUE in as much that it is custom designed according to the customers specific needs. It is followed through at every stagefrom design through production, installation and commissioning by independently operated business departments within the company.
8
Automation
Today COIM s.r.l. offers a unique, durable, safe and highly automated range of machinery. All systems are designed to ensure complete flexibility and ease of use. The systems are designed to ensure the full automation of the plants and the machinery and allow a continuous monitoring of the plant operation and efficiency thanks to dedicated software. Automation can be achieved at various levels, depending on the customer needs, starting from management of the single press to the control of the production and the entire extrusion line.
Start Up
Due to perfect group organization and synergies, our furnaces are preassembled directly in COIM s.r.l. workshop. This allows our staff to check every detail and achieve excellent results, significantly reducing assembly and start-up time.
Research & development
We are convinced that technological innovation requires continuous research to thrive. For this reason, our Research & Development department works round the clock to keep up with the market trends.We interpret RESEARCH as looking to the future and investing in innovation, foreseeing new scenarios and being ready to meet tomorrow’s needs today. “High production performance and reliability” is the mission followed by our staff made up of engineers, draughtsmen and system administrators, always ready to anticipate market needs and ensure maximum product quality.
9
Products - Gas Fired Billet Heaters
COIM’s core product is the Gas-Fired Billet Heater, which has made the company famous all over the world.
Simply The BestCOIM Gas-fired Billet Heaters are universally known as the most performing, efficient and reliable on the market.
COIM’s Billet Heater represents the absolute excellence in terms of energy efficiency, accuracy of heating, robustness and reliability.
Top Energy Efficiency - The Lowest Gas ConsumptionCOIM exclusive heat recover system allows to reach
a top level of energy efficiency which is wide over the performances of competitors.
10
Ecologic ChoiceA lot of our customers got financial incentives by
their governments, due to the reduction of exhausts and energy consumptions after the substitution of
their old heaters.
Strenght and Lifetime Wide Over the AverageThe longest- guarantees about lifetime of refractories, heat resistant rolls, burners.
The generous dimensions of our heaters and the high quality of the installed components allow a drastic
reduction of maintenances’ frequency and costs.
Excellent Heating Homogeneity - Custom Heating AlgorithmsExcellent homogeneity of the heat inside (radial homogeneity) and along (longitudinal homogeneity) the billet. COIM heaters can perform excellent taper heating as big added value.
11
Products - Gas fired Billet Heaters
12
For Aluminum, “turn-key” solutions with our gas-fired heater with hot shear or hot saw for logs, including logs storage, pusher and conveyor to the press.
Products - Log Heating Furnaces + Hot Log Shear / Hot Saw
Our shears and saws are characterized by their high solidity and reliability, cut precision and the possibility to work with “Programmable Scrap”.
13
COIM designs and manufactures special furnaces for the Heat Treatment of Copper and Brass Rods, Tubes and Profiles (Annealing, Bright Annealing, Straightening), Aluminum Billets (Homogenization) and Aluminum Bars and Profiles (Ageing and Hardening). COIM has developed its own technology for Roller-Heart Continuous Furnaces (Jet Impingement), also with Vacuum and Inert Gas.
Special Solutions for the Heat TreatmentDifferent and custom solutions for the annealing of rods and tubes in copper and copper alloys, for the homogenization of aluminum billet and the ageing of aluminum profiles.
Products - Annealing and Heat Treatment Furnaces
Continuous Roller Hearth FurnacesAdvanced technology for Continuous Roller Hearth Furnaces, for copper and copper alloys rods and tubes, applying our highly efficient Jet Impingement Technology.
14
Bright Annealing with Vacuum and Inert GasLarge experience both with direct and indirect gas-fired heating; we know and manage bright annealing technology with use of vacuum and inert gases.
Aluminum Log Homogenizing FurnacesHighly efficient and reliable Batch Furnaces for
the Logs Homogenizing.
Ageing Furnaces for Aluminum ProfilesAluminum extruders who choose COIM are
“quality oriented” and pay their investments in terms of productivity, low maintenances costs
and top quality of heat treatment.
15
Automatic / Intelligent Storages and machine to move and stock billets or extruded products.
Billet Handling Machines for Up (Down) Streaming Of Billet Heaters
High quality Custom machines for the handling and storage of billets and extruded products
Custom software for the Billet Data Management, connecting Mes production orders and the company’s databases.
Brass Billet Automatic Storage - Capacity 6000 Ton
n°2 Exit Lines from Continuos Casting Machinesn°2 Walking Beam Machines for Singularizationn°5 Crane Manipulators with Hydraulic Grippersn°5 Billet Vertical StoragesFully Integrated with Casting Machines and Saws
Products-“Turn Key” Fully Automatic Vertical Storages for billets and logs, with Data Management System
16
Service Specialized staff dedicated to any customer need
Even after our machines are assembled and commisioned, they are followed and monitored by our Service department, one of our strengths, a team of professionals highly specialized in assisting customers during production.
Remote ServiceInitial customer service is provided via Internet. For this reason, each machine or system is equipped with a modem that guarantees systematic service, constantly monitoring each customer’s problem. Remote service allows us to identify problems in real-time and, when possible, resolve situations directly from our facilities, thus saving time and increasing productivity.
Mechanical service and Spare PartsOur Service department helps customers find the best solution to any mechanical problem since we are able to provide mechanical spare parts whenever necessary. If on-site service is required, an appointment will be made with our technicians to identify the best corrective measures to be implemented.If, on the other hand, Spare Parts are required, whether standard or special, our staff will be pleased to quickly provide customers with the best estimate for the required parts.
17
Thanks to Our CustomersFor their contribution to our success since 2000
ALMAG ITALY
ALUMERO FINEX EXTRUSION NETHERLANDS
ALUTITAN ITALY
ANODALL EXTRUSION ITALY
ARAB ALUMINUM JORDANY
ASB BARBOSA PORTUGAL
AURUBIS STOLBERG GERMANY
BERNA ERNESTO ITALY
CECIL S/A LAMINAÇAO BRASIL
DIEHL METALL STIFTUNG GERMANY
ELITE EXTRUSION UAE
EREDI GNUTTI ITALY
ESTRAL ITALY
ETEM GREECE
FIRAT TURKEY
FITCO GREECE
GASTALDELLO ITALY
GINDRE DUCHAVANY FRANCE
HALCOR METAL WORKS GREECE
HYDRO ALLUMINIO ITALY
KLIL ISRAEL
KME SERRAVALLE ITALY
KME BERLIN GERMANY
KME OSNABRUCK GERMANY
KME GIVET FRANCE
KME NIEDERBRUCK FRANCE
KME BOISTHOREL FRANCE
KUZOCM RUSSIA
LDM OUTOKUMPU NETHERLANDS
METALLI ESTRUSI ITALY
METALLURGICA CIDNEO ITALY
METALLURGICA SAN MARCO ITALY
MUELLER COPPER TUBE USA
NINGBO BOWAY CHINA
NOVELLINI INDUSTRIES ITALY
ORIENTAL COPPER THAILAND
PANDOLFO ALLUMINIO ITALY
PEGLER UK
PENINSULAR DEL LATON SPAIN
SAPA EXTRUSION USA
SARKUYSAN TURKEY
STEELMET BULGARY
SWISSMETAL SCHWEIZ
VMK RUSSIA
WIELAND WERKE GERMANY
18
Contact UsCoim s.r.l.
Presezzi Extrusion Group Contact
Profile Automation S.r.l.Operation Headquarters:Via Verdi, 1,2/4A 46032 - Castelbelforte (MN) tel. +39 0376 258050 - fax +39 0376 256009 www.pasrl.com
Presezzi Extrusion S.P.A.via Rovereto 1/d - 20871 Vimercate (MB) tel +39 039 635011 - fax +39 039 63501220www.presezziextusion.com
Coim s.r.l.Operation Headquarters:
Via del Donatore, 5, 25030 Castelcovati (BS)tel. +39 030 718473 - fax +39 030 718527
C.F. e N° R.Imp. 00945240174 P.IVA IT 00590030987mail: info@coimsrl.net - www.coimsrl.net
Registered Office: via Rovereto 1/d - 20871 Vimercate (MB)
tel +39 039 635011 - fax +39 039 63501220
Presezzi Extrusion Group - Head OfficeMilan - Italy
via Rovereto 1/d - 20871 Vimercate (MB) tel +39 039 635011 - fax +39 039 63501220
USA and CANADAsell and serviceBruno Donada Area Managerb.donada@presezziextrusion.com Phone/Fax +1 (847) 676 2459
www.presezziextrusiongroup.com
19
20
top related