commercial body fittings body mounting fittingsstorage.cbf.uk.com/pdf/bodymountingbrackets.pdf ·...
Post on 02-Sep-2018
229 Views
Preview:
TRANSCRIPT
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
001
Universal Body Mounting Bracket
No. ABMB006 wgt. 0.43kgFor use on chassis with 75 or 100mm runnersEpoxy coated 5mm pressed steel
Universal Body Mounting Bracket
No. ABMB007 wgt. 0.45kgFor use on chassis with 125mm runnersEpoxy coated 6mm pressed steel
UniversalBody Mounting Bracket
No. ABMB007/14 wgt. 0.45kgFor use on chassis with 125mm runnersEpoxy coated 6mm pressed steel
No. ABMB022 wgt. 0.35kgFor use on chassis with 100mm runnersEpoxy coated 6mm pressed steel
UniversalBody Mounting Bracket
No. ABMB023 wgt. 0.36kgFor use on chassis with 100mm runnersEpoxy coated 6mm pressed steel
UniversalBody Mounting Bracket
UniversalBody Mounting Bracket
70
2 x Ø11.5
40
1 slot 13 x 19
40
86
2 x Ø11.5
65
34
126
Ø13
40
62
1 x slot 14 x 29
2 x Ø11.5
65
32
126
40
62
30
45
Ø12.5
2 x Ø11.5
9434
62
2 x Ø11.5
45
30
38 93
1 slot 16 x 19
62
No. ABMB023/14 wgt. 0.36kgFor use on chassis with 100mm runnersEpoxy coated 6mm pressed steel
45
30
32 93
2 x Ø11.5
1 x slot 14 x 29
62
BODY MOUNTINGFITTINGS
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
002
UniversalBody Mounting Bracket
No. ABMB028 wgt. 0.40kgFor use on chassis with 125mm and 150mm runnersEpoxy coated 6mm pressed steel
UniversalBody Mounting Bracket
No. ABMB030 wgt. 0.43kgFor use on chassis with 150mm runnersEpoxy coated 6mm pressed steel
UniversalBody Mounting Bracket
No. ABMB066 wgt. 0.35kgFor use on chassis with 100mm runners. Epoxy coated 6mm pressed steel
UniversalPedestal Bracket
No. ABMB067 wgt. 0.42kgFor use on chassis with 75mm runnersEpoxy coated 6mm pressed steel
UniversalBody Mounting Bracket
No. ABMB072 wgt. 0.36kgFor use on chassis with 100mm runnersEpoxy coated 6mm pressed steel
UniversalBody Mounting Bracket
No. ABMB069 Black paintedNo. ABMB069/GV Galvanized wgt. 0.51kgFor use on chassis with 75-100mm runners5mm fabricated steelEpoxy coated or galvanized finish
2 x Ø12.5
58
29
39110
1 slot 16 x 19
62
32
2 x Ø12.5
32
Ø12.5
133
62
2 x Ø11
45
30
32
Ø14.5
95
62
70
36
41 2 x Ø11.5
1 Slot 12.5 x 25
85
86
2 x Ø11.5
95
1 slot 12.5 x 16.5
45
30
34
62
80
2 x Ø10.5
1 slot17x 25
62
42
31
55
BODY MOUNTINGFITTINGS
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
BODY MOUNTINGFITTINGS
003
Mercedes/VolkswagenBody Mounting Bracket
Inner longitudinal bracket suits Mercedes Sprinter and Volkswagen Crafter 3.5 tonne GVW
Works in conjunction with ABMB007/14
Body MountingChannel
No. ABMB18581/BLK wgt. 1.02kg
Black painted 5mm steel
Mercedes Sprinter/Volkswagen Crafter 2006 onwardsUpper Body Mounting Bracket
Standard Chassis: Suits the first 2 mountings on each side of the chassis directly behind the cabDouble cab: Suits the first mountings on each side of the chassis directly behind the cab
No. ABMB088/MV wgt. 0.80kgSuits 125mm runnerBlack painted 6mm steel
1 slot20 x 13
125
112
60
2 x Ø11
185
81
50
55
50
118
124
5671
2 slots27 x 14
4 x Ø12
62
4 x Ø11
71
65
BODY MOUNTINGFITTINGS
No. ABMB075/125GV wgt. 1.17kg
Galvanized 6mm fabricated steelSuits 125mm runner
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
004
DAF Upper Initial frontBody Mounting Bracket
No. ABMB006/16DFwgt. 0.43kgFor use on chassis with 100 & 125mm runnersBlack painted 6mm pressed steel Suits LF45/55 Euro 4
*It is recommended that 16mm bolts are used to connect the upper & lower brackets
DAF Upper Intermediate Body Mounting Bracket
No. ABMB007/16DFwgt. 0.45kgFor use on chassis with 125mm runnersBlack painted 6mm pressed steel Suits LF45/55 Euro 4
*It is recommended that 16mm bolts are used to connect the upper & lower brackets
DAF Upper IntermediateBody Mounting Bracket
*It is recommended that 16mm bolts are used to connect the upper & lower brackets
Body MountingSpring & Washer Set
No. ABMB044/SPR 1 x Spring wgt. 0.28kg 1 x WasherSpring: 76 x 39 dia. x 21.5mm i/d Red paintedWasher: 4 x 36 dia. x 16.5mm i/d Galvanized finish
*Where required, spring & washer to be fitted to the first and second mountings on each side of the chassis! To achieve the recommended pre-load, the spring must be tightened/reduced to a length of 70mm
Optional: Washer onlyABMB044/WA/GV4 x 36mm dia x 16.5mm i/d
DAF Lower (Front)Body Mounting Bracket
No. ABMB045/DFwgt. 0.71kgBlack painted 6mm fabricated steel Suits LF45/55 Euro 4
*It is recommended that 16mm bolts are used to connect the upper & lower brackets
70
2 x Ø13
1 slot 17 x 28.5
32
41
No. ABMB023/16DF wgt. 0.36kgFor use on chassis with 100mm runnersBlack painted 6mm pressed steel
2 x Ø13.5
65
38
31
124
1slot 17 x 28.5 62
2 x Ø13.5
45
31
93
1 slot 17 x 28.5
30
62
55
8899
351 slot
40 x 16.5
50
86
2 x Ø13.5
BODY MOUNTINGFITTINGS
150115
50
50
25
3 x Ø17
135
No. ABMB52wgt. 1.17kg
To suit LF55Black painted 8mm steel
DAF Guide Plate
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
005
DAF Retainer Plate (bolt on)
No. ABMB53/6 wgt. 1.18kgBlack painted 8mm steel
DAF Retainer Plate (weld on)
No. ABMB53 wgt. 1.20kgBlack painted 8mm steel* To be used when a rigid joint between the chassis & body subframe is required (i.e. fitment of tail lift)
* To be used when a rigid joint between the chassis & body subframe is required (i.e. fitment of tail lift)
No. ABMB550/DF wgt. 0.98kgTo suit LF55 & 65, CF65, 75, 85Black painted 8mm pressed steel
25
102
67
851001 x Ø17
2 x Ø13
60
DAFTie Bar (LF45 Series)
No. ABMB754 435mm wgt. 0.62kgBolt on 16mm dia. Gold passivate finishSuitable for use with No. 550/DF
No. ABMB755 380mm wgt. 0.32kgNo. ABMB755/335 335mm wgt. 0.28kgBolt on 12mm dia.Gold passivate finishSuitable for use with No. 551/DF
DAFMounting Bracket
No. ABMB551/DF wgt. 0.44kgTo suit LF45 Series Black painted 5mm pressed steel
Thread180
435
Ø16
38
Ø17335/380
Ø12
32
Ø13
Thread150
DAFMounting Bracket
1 x Ø13
20
90
55
7790
2 x Ø13
55
50
50
25
6 x Ø13
135150
DAFTie Bar (LF55 & 65,
CF65, 75, 85)
BODY MOUNTINGFITTINGS
50
50
25
135150
3 x Ø13
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
135
118
46 50
90
2 x Ø8
006
Disc SpringWasher
No. ABMB03/14 wgt. 0.80kg/1001.5mm Phospheric coated steel
Ø12.2 id
No.ABMB03 wgt. 0.50kg/1001mm Zinc plated steel
Disc SpringWasher
Body Mounting Bracket
No. ABMB691 wgt. 0.64kg17 tonne MAN Upper bracket Mitsubishi Canter lower bracket17 tonne Renault Midlum upper bracketFor use with125 & 150mm runners with slotted holeBlack painted 6mm fabricated steel
Body Mounting Bracket
No. ABMB706B/90GV wgt. 0.73kgSuitable for Renault Master, Vaux-hall Movano, Citroen Relay, Fiat Ducato, Peugeot Boxer 2010 chassis onwards. To suit 100mm runnersGalvanized fabricated steel
No. ABMB706A wgt. 0.62kgSuitable for Ford Transit (pre- April 2000), Mercedes Sprinter, LDV Black painted fabricated steel
Body Mounting Bracket
Ø14.2 id
MAN/Mitsubishi/RenaultBody Mounting Bracket
Ø31.5
Ø34
2 slots 10.5 x 30
65
54
Slot 24 x 15
Ø12.5
123
60
40
2 holesØ82 Slots
12 x 27
90
5086
152
130
40
2 slots 10.5 x 30
118100
8150
90
2 x Ø8
40
No. ABMB706B wgt. 0.62kgSuitable for Ford Transit (pre April 2000), Mercedes Sprinter, LDV, Volkswagen LT RangeBlack painted fabricated steel
Body Mounting Bracket
BODY MOUNTINGFITTINGS
141
82
60
2 slots10.5 x 19.5
2 x Ø8.5
9550
146
No. ABMB705B wgt. 0.86kgSuitable for Citroen Relay, Fiat Ducato, Peugeot Boxer, pre 2010 modelsTo suit 100mm runnerBlack painted 5mm fabricated steel
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
2 holesØ12.5
135
85152
140
2 slots12 x 27
007
Body Mounting Bracket
No. ABMB706B/140GV wgt. 0.89kgSuitable for Renault Master and Vauxhall Movano. To suit 150mm runnersGalvanized fabricated steel
Body Mounting Bracket
No. ABMB707A wgt. 0.60kgSuitable for Ford Transit (Pre- April 2000), Mercedes Sprinter, LDV, Volkswagen LT RangeEpoxy coated fabricated steel
Body Mounting Bracket
No. ABMB707B wgt. 0.60kgSuitable for Ford Transit (Pre- April 2000), Mercedes Sprinter, LDV, Volkswagen LT RangeEpoxy coated fabricated steel
2 x Ø82 slots11 x 30
No. ABMB760/48 Size: 125 x 51mmSuits chassis thickness 4-5mm & 5-8mm wgt. 0.83kg24 x 15.5mm slotted holeDrop forged steel, galvanized
No. ABMB760/712 Size 125 x 51mm Suits chassis thickness 7-8mm & 10-12mm wgt. 0.70kg24 x 15.5mm slotted holeDrop forged steel, galvanized
No. ABMB760/1016 Size: 129 x 60mmSuits chassis thickness 10-12mm & 14-16mm wgt. 0.96kg24 x 16.5mm slotted holeDrop forged steel, galvanized
Body Clamp
No. ABMB760/36 Size: 124 x 47mm Suits chassis thickness 3-4mm & 5-6mm wgt. 0.54kg26 x 17mm slotted holeDrop forged steel, galvanized
132
50
117
4850
70 35
83 70
2 x Ø8 2 slots11 x 30
102
7850
35
120
Body Clamp
Body Clamp Body Clamp
BODY MOUNTINGFITTINGS
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
008
Mercedes Atego Lower Body Mounting Bracket
No. ABMB051wgt. 0.34kgTo suit Atego 816-1024 Atego 1218-1529Black painted 6mm pressed steel
Mercedes Atego Lower Front Body Mounting Bracket
No. ABMB058 wgt. 0.33kgTo suit Axor 1824-2633 Actros 1832L-2560LBlack painted 6mm pressed steel
No. ABMB080 wgt. 0.718kg To suit Atego 816-1024 Atego 1218-1529Epoxy coated10mm fabricated steel
Mercedes AtegoAttachment Plate
No. ABMB082 wgt. 0.59kgTo suit Atego 816-1024Black painted 8mm steel
Mercedes AtegoGuide Plate
No. ABMB083 wgt. 0.61kgTo suit Atego 816-1024Black painted 8mm steel
45
2 x Ø13.544
24 x 18
20
25
102
134
Ø18 25
2 x Ø13
5750
110
Ø18
45
60
30
2 x Ø15
50
100
50
94
15
80
125
4 x Ø14.5
15
80
125
2 x Ø14.5
50
Mercedes AtegoGuide Plate
Mercedes Axor/Actros LowerBody Mounting Bracket
BODY MOUNTINGFITTINGS
150
18450
50
2 x Ø14.5
No. ABMB084 wgt. 1.66kgTo suit Atego 1218-1529Black painted 8mm steel
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
009
No. ABMB085 wgt. 1.62kgTo suit Atego 1218-1529Black painted 8mm steel
Mercedes Axor/ActrosGuide Plate
Mercedes Axor/ActrosAttachment Plate
Body Mounting Spring
No. ABMB086 wgt. 1.31kgTo suit Axor 1824-2633 Actros 1832L-2560L Black painted 8mm steel
No. ABMB087 wgt. 1.31kgTo suit Axor 1824-2633 Actros 1832L-2560LBlack painted 8mm steel
150 184
13550
50
25
150 150
50
50
25
3 x Ø14.5
6 x Ø14.5
150150
50
50
25
6 x Ø14.5
100
Mounted Photo
No. ABMB0237/SPR wgt.0.11kg Yellow paintedSpring: 44 x 31mm dia. o/d 16.5mm dia. i/dSuits all Mercedes Atego/Axor/Actros chassis (except tippers) Spring to be fitted to the first mounting brackets on each side of the chassis directly behind the cab.Suits Mercedes, Iveco chassis and Isuzu chassisSuitable for use with 023/14, 007/14 & 051/14/IZU Mounting Brackets
! To achieve recommended pre-load the spring must be tightened/reduced to a lengthof 38mm (approx 6mm)
! Important note
Prior to the fitment of all Body Mounting Hardware please refer to the Chassis Manufacturers’ manual/website for the correct mounting procedures
BODY MOUNTINGFITTINGS
Mercedes AtegoAttachment Plate
Sect
ion
1
Commercial Body Fittings6th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
website: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
010
Mercedes Atego & Actros Body Mounting GuidelinesThe following information is for guidelines only, for the latest up-to-date recommendations please refer to the
chassis manufacturer’s handbook/website
Arrangement shown using 100mm runners – when 127mm runners are required replace 023/14 with 007/14 upper brackets. Brackets and plates must be fitted no more than 1000mm apart along the chassis length.A 3mm gap must be visible between upper and lower brackets when fitted.
! First nearside and offside mountings behind the cab must be flexible. Use: ABMB0237/SPR (see page 009)
Arrangement shown using 127mm runners Brackets and plates must be fitted no more than 1000mm apart along the chassis length
Fitment of Tail LiftFrom centre of the rear axleto the rear of the chassis, replace 023/14 and 051with 082 flat attachment plates
Atego 816 - 1024 7.49 - 10 tonne
Atego 1218 - 1529 12 - 16 tonne! First nearside and offside mountings behind the cab must be flexible. Use: ABMB0237/SPR (see page 009)
Fitment of Tail LiftFrom centre of the rear axleto the rear of the chassis, replace 007/14 and 051with 085 flat attachment plates
! First nearside and offside mountings behind the cab must be flexible. Use: ABMB0237/SPR (see page 009)
Axor 1824-2633 & Actros 1832L-2560L 18 - 26 tonne
Fitment of Tail LiftFrom centre of the rear axleto the rear of the chassis, replace 007/14 and 058 with 087 flat attachment plates
Arrangement shown using 127mm runnersBrackets and plates must be fitted no more than 1000mm apart along the chassis length
BODY MOUNTINGFITTINGS
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
Iveco/CargoUpper Pedestal Bracket
011
No. ABMB692 wgt. 0.56kgFor use on chassis with 100mm runnersBlack painted 6mm fabricated steel
No. ABMB696/IV wgt. 1.13kgTo suit chassis to runner Can be welded to steel runner or bolted to aluminium runnerGalvanized 6mm pressed steel
No. ABMB695/IV wgt. 0.88kgTo suit chassis to runner. Can be welded to steel runner or bolted to aluminium runnerGalvanized 6mm pressed steel
Body Mounting Spring
98
1 slot15 x 25mm
32
602 x Ø11.5
45
30
2 x Ø12.5
100
14545
115
100
115
190
4 x Ø12.5
45
Iveco Chassis Bracket
Mounted Photo
No. ABMB0237/SPR wgt.0.11kg Yellow paintedSpring: 44 x 31mm dia o/d 16.5mm dia. idSuits all Mercedes Atego/Axor/Actros chassis (except tippers) Spring to be fitted to the first mounting brackets on each side of the chassis directly behind the cab.Suits Mercedes, Iveco chassis and Isuzu chassisSuitable for use with 023/14, 007/14 & 051/14/IZU Mounting Brackets
IvecoChassis Bracket
IsuzuChassis Bracket
No. ABMB051/14/IZU wgt. 0.34kg
Suits Grafter chassis To suit chassis to runner Black painted 6mm pressed steel
45
Ø14 25
2 x Ø13
5740
110
! To achieve recommended pre-load the spring must be tightened/reduced to a lengthof 38mm (approx 6mm)
BODY MOUNTINGFITTINGS
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
No. ABMB603/VO wgt. 0.97kgModels FL4 FL6 FL7 FL10For use on steel sub-frame, rigid type bodiesFor use with Nos. 6037RP/VO & 6037WA/VOBlack painted 5mm fabricated steel
012
Ford TransitBody Mounting Bracket
No. ABMB709A wgt. 0.72kgTo suit 100mm runners on all new transits from April 2000.Epoxy coated fabricated steel
Ford TransitBase Plate
Ford Transit Body Mounting Bracket
No. ABMB710A wgt. 0.38kgTo suit all new transits from April 2000Self colour 5mm steel
No.ABMB708A wgt. 0.65kgTo suit 75mm runners on all new transits from April 2000Epoxy coated fabricated steel
Volvo Fm SeriesUpper Body Mounting Bracket
No. ABMB601/VO wgt. 0.64kgWeld onModels FL4 FL6 FL7 FL10For use on steel sub-frame, rigid type bodiesBlack painted 5mm fabricated steel
VolvoLower Body Mounting Bracket
No. ABMB602/VO wgt. 0.92kgModels FL616 FL7 FL10Black painted 5mm fabricated steel
50 44
95
1 x Ø18.5
60
2 x Ø14.5
2 x Ø82 slots10 x 20
110
5560
100
9050
2 x Ø8
2 slots10 x 20
110
5560
100
7030
100165
60
100
2 x slots10 x 20
195
Volvo FM SeriesUpper Body Mounting Bracket
78
Ø18.5
125
48
50
125
44
28
Ø18.5
BODY MOUNTINGFITTINGS
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
013
No. ABMB6037RP/VO wgt. 0.10kgFor use with Nos. 603/VO & 607/VONatural rubber, black
No. ABMB6037WA/VO wgt. 0.12kgFor use with Nos. 603/VO & 607/VOBlack painted 8mm steel
Volvo FM SeriesLower Mounting Bracket
No. ABMB605/VO wgt. 0.46kgModels FL618 FS7A lower mounting bracket is recommended for pivoted and one way flexible mountings on the FL618 FS7 rigid trucksBlack painted 5mm fabricated steel
Volvo FM SeriesLower Mounting Bracket
No. ABMB607/VO wgt. 1.50kgModels FL6 FL7 FL10For use on aluminium sub-frameFlexible type bodiesBlack painted 5mm fabricated steel
Volvo FL/FM SeriesUpper Mounting Bracket
Volvo FM SeriesUpper Mounting Bracket
Ø1836
67
Volvo FM SeriesRubber Pad & Washer
44
Ø18.5
2 x Ø14.5
110
50
150
Ø18.5
4 x Ø12.5 89
95
125
25 50
No. ABMB606/VO wgt. 1.12kgFor use on aluminium sub-frame rigid type bodiesBlack painted 5mm fabricated steel
125
Ø18 36
58
32
9550
155120
25
4 x Ø12.5
Ø18.5
125
28
Ø18.5
2 x Ø14.5
105
4650
60
No. ABMB604/VO wgt. 0.75kgBolt onModels FL4 FL612 FL614All body typesBlack painted 5mm fabricated steel
BODY MOUNTINGFITTINGS
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
014
No. ABMB608/VO wgt. 0.73kgBlack painted 6mm fabricated steel
No. ABMB609/VO wgt. 0.75kgTo suit models FE, FL240 & FL280For use with semi rigid & rigid attachments.Black painted 6mm fabricated steel
Volvo FE/FL SeriesFlexible Attachment Set
No. ABMB609/RP/VO wgt. 0.14kg per setRubber Pad: 40 x 40mm dia.Washers: 2 x 43mm dia. x 4.0mm80 Shore HardnessTo suit models FE, FL240 & FL280For use with ABMB609/VOWhen tightened the rubber must be compressed 4mmAlso suits Renault Midlum & Premium
No. ABMB635/VO wgt. 1.70kgModels FL4 FL6For use on steel sub-frameAll body typesBlack painted 8mm steel
No. ABMB637/VO wgt. 1.65kgBlack painted 8mm steel
2 x Ø14.5
Ø18.5
98
50
75
27
3113
50
Volvo FM/FH SeriesUpper Body Mounting Bracket
Volvo Fe/FL SeriesUpper Body Mounting Bracket
98
75
50
2 x Ø16
58
Ø18.5
37
VolvoAttachment Plate
150 184
50
50
3 x Ø14
VolvoAttachment Plate
195140
50
5060
6 x Ø14
Ø14.5
BODY MOUNTINGFITTINGS
200184
50
50
50
4 x Ø14
No.ABMB636/VO wgt. 2.30kgModels FL7 FL10For use on steel sub-frameAll body typesBlack painted 8mm steel
Volvo FM/FH SeriesLower Attachment Plate
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
015
VolvoAttachment Plate
No. ABMB638/VO wgt. 1.00kgTo suit models FE, FL SeriesBlack painted 6mm fabricated steel
No. ABMB641/SCA wgt. 0.57kg
Black painted 6mm fabricated steel
ScaniaSeries 4 & P, R, T Series
Upper Body Mounting BracketRigid Fixing
Scania 4 & p, r, t Series
Upper Body Mounting BracketFlexible Fixing
No. ABMB643/SCA wgt. 0.57kgWeld onBlack painted 7.5mm fabricated steel
No. ABMB642/SCA wgt. 0.55kgBolt onBlack painted 7.5mm fabricated steel
No. ABMB644/SCA wgt. 0.71kgBlack painted 6mm fabricated steel
ScaniaSeries 4
Lower Body Mounting BracketRigid Fixing
No. ABMB645/SCA wgt. 0.85kgBlack painted 6mm fabricated steel
1 x Ø17.5
140
25
60
50 46
52
60
2 x Ø14.5
166
47
1 x Ø17.5
25
ScaniaSeries 4
Lower Body Mounting BracketFlexible Fixing
2 x Ø14.5
1 x Ø17.550
110
60
46
25
1 x Ø17.52 x Ø14.5
118
88
60
3824
Ø17.5
118
60
3824
190
100
45
4 x Ø12.5
2 x Ø14.5
45
Scania4 & P, R, T Series
Upper Body Mounting BracketFlexible Fixing
BODY MOUNTINGFITTINGS
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
016
Scania Series 4Attachment Plate
No. ABMB646/SCA wgt. 2.65kgBolt to chassis & weld to runnerBlack painted 12mm steel
Scania Series 4Attachment Plate
No. ABMB647/SCA wgt. 3.05kgChassis to runner attachment plateBlack painted 12mm steel
No. ABMB648/SCA/PRT wgt. 0.91kgBlack painted 5mm fabricated steelFor use with 641/SCA
Scania P, R, T SeriesLower BracketRigid Fixing
Scania P, R, T SeriesLower BracketFlexible Fixing
No. ABMB649/SCA/PRT wgt. 0.81kgFor use with 642/SCA or 643/SCABlack painted 5mm fabricated steel
No. ABMB650/SCA/PRT wgt. 2.33kgChassis to runner attachment PlateBlack painted 12mm steel
Scania P, R, T SeriesAttachment Plate
No. ABMB651/SCA/PRT wgt. 2.27kg
Bolt to chassis & weld to runnerBlack painted 12mm steel
Scania P, R, T SeriesAttachment Plate
100 216
60
1378 x Ø14.560
85
60
245
140
4 x Ø14.5
1 slot18 x 30
140
2 x Ø15
7060
50
34
9 x Ø15
200 130
50
5050
110
50
50
200
6 x Ø15
130
50
51
170
45
50
2 x Ø15
23
1 slot18 x 25
BODY MOUNTINGFITTINGS
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44(0) 121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
017
Balata Belting 10m rolls
Balata Belting offers excellent weathering properties and resistance to ageing
No. ABMBB3/50 10m x 50mm x 3 ply wgt. 2.95kgNo. ABMBB5/50 10m x 50mm x 5 plywgt. 3.94kg
3 ply approximately 3.75mm thick 5 ply approximately 7.00mm thick
Balata Belting 30m rolls
Balata Belting offers excellent weathering properties and resistance to ageing
No. ABMBB3/50/30 30m x 50mm x 3 ply wgt. 6.36kgNo. ABMBB3/75/30 30m x 75mm x 3 plywgt. 9.54kgNo. ABMBB3/100/30 30m x 100mm x 3 ply wgt. 12.72kgNo. ABMBB3/150/30 30m x 150mm x 3 ply wgt. 19.08kg
3 ply approximately 3.75mm thick
No. ABMBB3/68RD 68mm dia. x 3 ply wgt. 0.020kg No. ABMBB3/85RD 85mm dia. x 3 ply wgt. 0.026kg 1 x 16mm dia. hole Suits single bolt wing stay (P187-188)
Balata Packing Washer
No. ABMBB3/SQ 50 x 50mm x 3 ply wgt. 0.014kg1 x 12mm dia. hole
Balata Packing Washer
No. ABMBB5/RD 50mm dia x 5 ply wgt. 0.014kg1 x 12mm dia. hole
Balata Packing Washer
BODY MOUNTINGFITTINGS
ForBuffers & Fender
see pages 105-110
Sect
ion
1
Commercial Body Fittings7th Edition
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Universal Bearer Cleat PlateGalvanized Steel
No. ASTL9050/GVwgt. 0.35kg/each90 x 50 x 50 x 6mm2 x 6.5mm holes
Sold singly
Universal Bearer Cleat PlateZinc Plated Mild Steel
No. ASTL9548wgt. 0.22kg/each95 x 48 x 48 x 3.5mm2 x 6.5mm holes
Sold singly
Mounted Bearer Bracket
No. ASTL19040/85/PRwgt. 0.94kg/pr190 x 40 x 40 x 4mm4 x 8.5mm holes per bracket
Suits 100mm runner/100mm bearerSold in pairs
No. ASTL19040/PRwgt. 0.94kg/pr190 x 40 x 40 x 4mm4 x 6.5mm holes per bracket
Suits 100mm runner/100mm bearerSold in pairs
018
Runner Bearer BracketZinc Plated Mild Steel
No. ASTL16540wgt. 0.80kg/pr165 x 40 x 40 x 4mm4 x 6.5mm holes per bracket
Suits 100mm runner/75mm bearerSold in pairs
Runner Bearer BracketZinc Plated Mild Steel
4 x Ø6.5 4 x Ø6.5
50
50
6
48
48
3.5
40
40
4
Runner Bearer BracketZinc Plated Mild Steel
40
40
4
8 x Ø8.5
40
40
4
BODY MOUNTINGFITTINGS
2 x Ø6.5 2 x Ø6.5
Welwyn Garden City Tel: +44 (0)1707 371161 Fax: +44 (0)1707 372603Coseley: Tel: +44 (0)121 520 0100 Fax: +44 (0)121 522 3889
websites: www.cbf.uk.com & www.flush-tech.co.uk e-mail: sales@cbf.uk.com
Commercial Body Fittings7th Edition
Runner Bearer BracketGalvanized Steel
No. ASTL19050/3/PRwgt. 0.70kg/pr190 x 50 x 50 x 3mm4 x 6.5mm holes per bracket
Suits 100mm runner/100mm bearerSold in pairs
No. ASTL19040/4/6/UNIwgt. 0.40kg/ea190 x 40 x 40 x 4mm8 x 6.5mm holes
Suits 100mm runner/100mm bearerSold singly
Runner Bearer BracketZinc Plated Steel
No. ASTL19040/5/8/PRwgt. 1.42kg/pr190 x 40 x 40 x 5mm4 x 8.5mm holes per bracket
Suits 100mm runner/100mm bearerSold in pairs
Runner Bearer BracketZinc Plated Steel
No. ASTL19050/510wgt. 1.40kg/pr190 x 50 x 50 x 5mm4 x 10mm holes per bracket
Suits 100mm runner/100mm bearerSold in pairs
019
No. ASTL22050wgt. 1.51kg/pr220 x 50 x 50 x 5mm4 x 10mm holes per bracket
Suits 125mm runner/100mm bearerSold in pairs
Runner Bearer BracketGalvanized Steel
No. ASTL24050wgt. 0.89kg/pr240 x 50 x 50 x 3mm4 x 8.5mm holes per bracket
Suits 150mm runner/100mm bearerSold in pairs
8 x Ø6.5 4 x Ø8.54 x Ø6.5
50
50
3
40
40
4
40
40
5
50
50
5
Runner Bearer BracketZinc Plated Steel
50
50
5
50
50
3
Runner Bearer BracketUniversal
Galvanized steel
BODY MOUNTINGFITTINGS
4 x Ø10.0
4 x Ø10.0 4 x Ø8.5
Sect
ion
1
top related