communications & networks introduction

Communications & Networks – Introduction

Alexander Nelson

February 19th, 2018

University of Arkansas - Department of Computer Science and Computer Engineering

Networking

Number of Connected Devices

1

How can 50B devices all be connected?

1

Wireless Networking Categories

• LPWAN – Low Power

Wide Area Network

• WWAN - Wireless

Wide Area Network

• WPAN – Wireless

Personal Area

Network

• WLAN – Wireless

Local Area Network

2

WWANs

Wireless Networking Categories

1

1“Smart Cities Technologies” Ivan Nunes Da Silva and Rogerio Andrade –

ISBN 978-953-51-2808-3

3

WWAN – Wireless Wide Area Network

WWAN – Set of technologies that provide wireless access to

geographically distant sources

Includes:

• Cellular Technologies

• 2G

• 3G

• LTE

• LTE-M

• IEEE 802.16 – WiMAX

• LPWAN Technologies

• LoRA

• SigFox

• Ingenu

• Mesh Networking?

4

Cellular Communications

Cellular Network – Communication network where last link is

wireless

Distributed over land areas – “cells”

2

2By Andrew pmk - SVG version of Frequency reuse.fig by Mozzerati, CC

BY-SA 2.5, https://commons.wikimedia.org/w/index.php?curid=2155967 5

Cellular Communications

Advantages:

• More capacity than a single large transmitter, same frequency

used for multiple links in different cells

• Cell towers are closer – Mobile devices use less power than

with single transmitter

• Larger coverage area than a single terrestrial transmitter –

additional cell towers can be added indefinitely

6

Cellular Communications

Range is inversely proportional to frequency

CDMA2000 Network

7

WiMAX

WiMAX – Worldwide Interoperability for Microwave Access

Microwave meaning 300MHz-300GHz frequencies

Meant to provide “last-mile” broadband over wireless

Originally 30-40Mbps – Upgraded to 1Gbps in 2011

8

WiMAX

WiMAX – Worldwide Interoperability for Microwave Access

Microwave meaning 300MHz-300GHz frequencies

Meant to provide “last-mile” broadband over wireless

Originally 30-40Mbps – Upgraded to 1Gbps in 2011

Most WiMAX deployments are winding down

9

LPWAN Communications

LPWAN – Low Power Wide Area Network

Designed for long range communications at low bit rates

Data Rates – 0.3kbps-50kbps

10

LPWAN Communications

LPWAN – Low Power Wide Area Network

Designed for long range communications at low bit rates

Data Rates – 0.3kbps-50kbps

Intended for sensor-type deployments at long range

Power IoT/Smart-City type applications

11

LPWAN Communications

12

Mesh Networks

WANETs – Wireless Ad hoc Networks

MANETs – Mobile Ad hoc Networks

ad hoc – latin, literally “for this” – Does not rely on static

infrastructure

MANETs allow for nodes to move freely geographically

13

Mesh Networks

Mesh Networks as WWAN?

Communications technologies similar to cellular networks

Can provide WAN access to small devices through sink nodes

14

Wireless Network Challenges

Wireless Communication

Given a certain amount of RF frequency spectrum, how to

optimize communication?

Metrics:

• Throughput – Total network bits-per-second

• Latency – Average time form packet creation to reception

• Fairness – Do devices receive equal share of resource

(airtime)?

15

Multiple Access Techniques

If multiple wireless clients exist, how to divide resources?

Multiple Access Methods – Techniques for dividing resources

• CSMA – Carrier Sense Multiple Access

• TDMA – Time Division Multiple Access

• FDMA – Frequency Division Multiple Access

• CDMA – Code Division Multiple Access

• SDMA – Space Division Multiple Access

16

Carrier-Sense Multiple Access

CSMA – Carrier Sense Multiple Access

Nodes check to see if anyone is communicating

If channel is empty, they may start

17

Hidden Node Problem

Not detecting communication does not mean channel is clear

18

CSMA/CA

CSMA/CA – CSMA with Collision Avoidance

1. Carrier Sense – Listen for other transmission

2. Random Backoff – If channel is busy, backoff for random

amount of time

3. Request to Send/Clear to Send (RTS/CTS) – Access

Control Signals

4. Transmission – Send entire packet to Access Point (AP)

5. Acknowledgment – AP sends acknowledgment if packet is

received

6. Exponential Backoff – If no ACK, assume collision and

backoff

19

CSMA

Advantages

• Low latency if channel is not busy

• No need for centralized control

Disadvantages

• Busy channel causes many collisions – low throughput & high

energy waste

20

TDMA

TDMA – Time Division Multiple Access

3

3By Mozzerati at English Wikipedia - 13:13, 2004 Sep 5 (UTC), CC BY-SA

3.0, https://commons.wikimedia.org/w/index.php?curid=32927708

21

TDMA

Advantages

• Nodes only need to listen during frame – save power

• Guaranteed no collision

Disadvantages

• Lower Throughput – A node may not need to use their frame

22

FDMA

FDMA – Frequency Division Multiple Access

Divide available frequency into channels

Nodes communicate on their own channel

Wi-Fi FDMA – 5MHz channel width – 22MHz spectrum spread

23

CDMA

CDMA – Code Division Multiple Access

Use orthogonal psuedorandom codes to allow additive

communication on same spectrum

Four mutually orthogonal codes24

CDMA Example

25

CDMA

Advantages

• Multiple nodes may communicate at the same time

• Flexible length of codes – dynamic allocation

Disadvantages

• Reduced throughput per device per frame

That is, takes n times as long to transmit a single bit, where n

is length of the code

• Subject to Near-Far problem

26

Near Far Problem

Problem with SNR for geographically disparate nodes

Near node Noise may be similar to magnitude of far node signal

27

Phase Shift Keying

Phase Shift Keying – PSK

Code division multiple access – Codes are multiplexed by phase

rather than time

28