create myconfig cmc 4 - siemens ag · create myconfig cmc 4.6 industry sector ... 2013-09-01 page...

Create MyConfig CMC 4.6 New Functions

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 2/50

SUA/SCI/CMC application environment

SUA SinuCom Update Agent

SCI SinuCom Installer

CMC Create MyConfig

840D sl Hardware NCU 7x0.2

SW 1.4 SW 1.5 SW 2.6 SW 2.4 SW 2.5 SW 2.7

840D Powerline NCU 57x.y

SW PL

840D sl Hardware NCU 7x0.3

SW 4.4

SUA 2.2.1 SUA 3.0.6

SCI 2.6 SP1

CMC 4.4 (German only)

SW 4.5 SW 4.5 SP2

CMC 4.5

PCU50.3 Win XP HMI-Advanced

SUA 3.0.6, SCI 2.6 SP1, CMC 4.5/4.6

can be installed in parallel on the PC

CMC 4.6

PCU50.5 Win7

SW2.7 SP3

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 3/50

SINAMICS system configuration with Create My Config

Automatic configuration with comparative topology

Default topology in a

SINAMICS offline topology package

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 4/50

Definition of terms In order to avoid confusion with the “setpoint topology“ of SINAMICS regarding CMC, the term “setpoint topology“ will only be used as from CMC 4.6 when referring to the “setpoint topology“ of SINAMICS. In the future, the term “default topology“ shall replace the existing term “setpoint topology“ regarding CMC issues. Default topology: A SINAMICS Offline Topology package (SOT) allows to load a CMC package with a configured default topology in SINAMICS with the aim to activate it as a setpoint topology. Comparative topology: Within a CMC package, a configured comparative topology can be compared with the setpoint topology of SINAMICS and an error evaluation can be performed. Setpoint topology: When uploading a DRV online archive or an offline archive, you can display the setpoint topology of SINAMICS in CMC-Topo for diagnosing and, if required, further process this for a comparative or default topology.

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 5/50

Terminology Starter

Create MyConfig - Topo

SINAMICS

Topologyies

Actual topology [p9901]

Setpoint topology [p9903]

SINAMICS Offline Topology package (SOT) with

default topology [*.utz]

Setpoint topology [*.arc]

for diagnosing and further processing

Comparative topology [*.ust]

Prj setpoint topology

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 6/50

Create MyConfig

New functions CMC 4.6

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 7/50

New functions CMC 4.6

Expert/Shield § Password protection for logbook, package, project and components § Change of the dialog pages

§ SINAMICS device configuration + archive data selection ð system configuration § configuring of the archive source (online archive including all data -> “00“) § Blocking of configured dialog page functions § Dialog page for storing archives and backup § Selection of the Windows XP resp.Windows 7 operating system

§ System variables for the configuration of dialog pages with read only access § New type-oriented input function

Expert § Cross-reference list § Information for language archive § IntelliSense and context menu for system variables in manipulation tasks and step conditions § Display of the internal versions of the project, components and package

Shield § Adjust abort conditions

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 8/50

New functions CMC 4.6

Diff § Merging of files during folder / archive comparison

§ Editing / merging during file comparison

§ Bit editor for the input of hex values § Uploading and downloading of online archives during folder / archive comparison § Uploading and downloading of online archives during NC data comparison

§ Fading out of NC data which are only included in one archive

§ Plaintext PLC blocks

Topo § Redesign of graphic in Topo (SMI, SMC, DQE, DQI…) § Uploading of online archives for diagnosing § Axis-drive assignment for diagnosing single machines § Axis-drive assignment for commissioning with CMC packages for series machines § Support of the HF spindle

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 9/50

New functions CMC 4.6

Setup § CMC silent installation

CMC Report § Display of the versions entered in the project, components resp. package. These

versions are called up via the context menu in the Windows explorer or in the menu project in Expert

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 10/50

Password protection

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 11/50

Redesign of the dialog pages

CMC 4.5 CMC 4.6

Conversion

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 12/50

Dialog page system configuration

n

Archiving of all machine data (00)

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 13/50

Dialog page SINAMICS topology

New function

List for comparative topology

List for default topology

Initial condition ð comparative topology

Automatic configuration ð comparative topology

Default topology ð default topology

Offline archive ð comparative topology

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 14/50

Selection of the operating system PCU50 Dialog page access to Windows / Linux

Selection of the operating system PCU under the Package tab PCU, NCU login information, release for Windows package

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 15/50

Storing of archives

Backup.arc StepBegin.arc StepEnd.arc Result.arc

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 16/50

CF card backup before and after package processing

<CF-Id>_backup.tgz <CF-Id>_result.tgz

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 17/50

Blocking of configured dialog page functions

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 18/50

Introduction of system variables for dialog page configuring

The ambient conditions and all configurations on the dialog pages can be read via system variables in manipulation tasks and step conditions.

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 19/50

IntelliSense when scripting in manipulation tasks and step conditions

Autocomplete tool for processing instructions which have been given by a programmer. Example:

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 20/50

New type-bound input functions

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 21/50

Cross-reference list in the project

Cross-reference list for identifiers

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 22/50

Cross-reference list in the project

Cross-reference list for folder and file objects

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 23/50

Installation of language archives

Information output when displaying linked language archives

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 24/50

CMC Report for projects, packages, components via the menu in Expert and via the context menu in the Windows explorer

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 25/50

CMC package processing

When processing packages , the package is not always terminated in case of errors. If it is suitable – under the given supplementary conditions – to continue the package, the user can decide whether the package shall be continued or aborted. Example: Error message One file could not be copied. Continue or Abort

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 26/50

Bit editor in CMC-Diff, NC data comparison

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 27/50

CMC-Diff merging during the folder-archive comparison

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 28/50

Editing and merging during the CMC-Diff file comparison

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 29/50

Commissioning of single machines

Uploading and downloading of online archives during the Diff NC data comparison and folder / archive comparison

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 30/50

Commissioning of single machines

Uploading of online archives in Topo

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 31/50

Fading out of NC data which are only included in one archive

Archive 1 with 00 stored

Archive 2 with FF stored

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 32/50

PLC plaintext names during the CMC-Diff folder archive comparison and in CMC Expert in components when copying

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 33/50

Redesign of graphic in Topo

Hardware-based display of SMI, SMC, DQE and Combi

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 34/50

Commissioning of single machines

Uploading of online archives in Topo

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 35/50

Axis-drive assignment

Specification of the axis-drive assignment via the comparative topology resp. the default topology in CMC packages

§ Calculation using the I/O address § Calculation using the drive number § Display of the dagnosis for the axis-drive assignment

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 36/50

Axis-drive assignment 840D sl

NC SINAMICS Profibus

doB

doY

doZ

doX

doSp

DO Variable

DO4

DO5

DO6

DO7

DO3

Value

DRV2

DRV3

DRV4

DRV5

DRV1

DRV6

Value Value

4140

4180

4220

4260

4100

4300

DRV2-1

DRV3-1

DRV4-1

DRV5-1

DRV1-1

DRV6-1

Index

Drive number

MD 30110[AXn] $MA_CTRLOUT_MODULE_NR[0,AX1]

I/O address

MD 13050[DRVn] $MN_DRIVE_LOGIC_ADDRESS[0]

AX2

AX3

AX4

AX5

AX1

AX6

Index

p978[n]

Index

1

2

3

4

0

5

Y

Z

Sp

B

X Axis name

2

3

4

5

1

6

dpSlot

Number

CU

Permanent syst.assignmt

Axis DO Variable

X ð doX Y ð doY Z ð doZ Sp ð doSp B ð doB

doSp doB doY doZ doX

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 37/50

Axis-drive assignment - configuring and diagnosing Calculation using the I/O address or drive number

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 38/50

Silent Installation CMC 4.6

The CMC 4.6 can be installed in silent mode. Via an opfile, you can include installation parameters : Command line call for automated installation. Sample call for installation in German: setup.exe /W /L1031 /V"commandline=-OF:OPFILE.txt" The installation directory contains a sample opfile OPFILE.TXT

Unrestricted / © Siemens AG 2013 - Subject to change without prior notice Industry Sector Create MyConfig CMC 4.6

2013-09-01 Page 39/50

CMC Report

CMC Report for project and package