cs 267 applications of parallel computers dense linear algebra
Post on 03-Jan-2016
35 Views
Preview:
DESCRIPTION
TRANSCRIPT
CS267 Dense Linear Algebra I.1 Demmel Fa 2001
CS 267 Applications of Parallel Computers
Dense Linear Algebra
James Demmel
http://www.cs.berkeley.edu/~demmel/cs267_221001.ppt
CS267 Dense Linear Algebra I.2 Demmel Fa 2001
Outline
° Motivation for Dense Linear Algebra (as opposed to sparse)
° Benchmarks
° Review Gaussian Elimination (GE) for solving Ax=b
° Optimizing GE for caches on sequential machines• using matrix-matrix multiplication (BLAS)
° LAPACK library overview and performance
° Data layouts on parallel machines
° Parallel matrix-matrix multiplication review
° Parallel Gaussian Elimination
° ScaLAPACK library overview
° Eigenvalue problems
° Open Problems
CS267 Dense Linear Algebra I.3 Demmel Fa 2001
Motivation
° 3 Basic Linear Algebra Problems• Linear Equations: Solve Ax=b for x
• Least Squares: Find x that minimizes ri2 where r=Ax-b
• Eigenvalues: Findand x where Ax = x
• Lots of variations depending on structure of A (eg symmetry)
° Why dense A, as opposed to sparse A?• Aren’t “most” large matrices sparse?
• Dense algorithms easier to understand
• Some applications yields large dense matrices
- Ax=b: Computational Electromagnetics
- Ax = x: Quantum Chemistry
• Benchmarking
- “How fast is your computer?” = “How fast can you solve dense Ax=b?”
• Large sparse matrix algorithms often yield smaller (but still large) dense problems
CS267 Dense Linear Algebra I.4 Demmel Fa 2001
Computational Electromagnetics – Solve Ax=b
•Developed during 1980s, driven by defense applications
•Determine the RCS (radar cross section) of airplane
•Reduce signature of plane (stealth technology)
•Other applications are antenna design, medical equipment
•Two fundamental numerical approaches:
•MOM methods of moments ( frequency domain)
•Large dense matrices
•Finite differences (time domain)
•Even larger sparse matrices
CS267 Dense Linear Algebra I.5 Demmel Fa 2001
Computational Electromagnetics
image: NW Univ. Comp. Electromagnetics Laboratory http://nueml.ece.nwu.edu/
- Discretize surface into triangular facets using standard modeling tools
- Amplitude of currents on surface are unknowns
- Integral equation is discretized into a set of linear equations
CS267 Dense Linear Algebra I.6 Demmel Fa 2001
Computational Electromagnetics (MOM)
After discretization the integral equation
has the form
A x = b where
A is the (dense) impedance matrix,
x is the unknown vector of amplitudes, and
b is the excitation vector.
(see Cwik, Patterson, and Scott, Electromagnetic Scattering on the Intel Touchstone Delta, IEEE Supercomputing ‘92, pp 538 - 542)
CS267 Dense Linear Algebra I.7 Demmel Fa 2001
Results for Parallel Implementation on Intel Delta
Task Time (hours)
Fill (compute n2 matrix entries) 9.20
(embarrassingly parallel but slow)
Factor (Gaussian Elimination, O(n3) ) 8.25
(good parallelism with right algorithm)
Solve (O(n2)) 2 .17
(reasonable parallelism with right algorithm)
Field Calc. (O(n)) 0.12
(embarrassingly parallel and fast)
The problem solved was for a matrix of size 48,672. 2.6 Gflops for Factor - The world record in 1991.
CS267 Dense Linear Algebra I.8 Demmel Fa 2001
Current Records for Solving Dense Systems
Year System Size Machine # Procs Gflops (Peak)
1950's O(100) 1995 128,600 Intel Paragon 6768 281 ( 338)1996 215,000 Intel ASCI Red 7264 1068 (1453)1998 148,000 Cray T3E 1488 1127 (1786)1998 235,000 Intel ASCI Red 9152 1338 (1830) (200 MHz Ppro)
1999 374,000 SGI ASCI Blue 5040 1608 (2520)2000 362,000 Intel ASCI Red 9632 2380 (3207) (333 MHz Xeon)
2001 518,000 IBM ASCI White 8000 7226 (12000) (375 MHz Power 3)
source: Alan Edelman http://www-math.mit.edu/~edelman/records.html LINPACK Benchmark: http://www.netlib.org/performance/html/PDSreports.html
www.netlib.org, click on Performance DataBase Server
CS267 Dense Linear Algebra I.9 Demmel Fa 2001
Current Records for Solving Small Dense Systems
MegaflopsMachine n=100 n=1000 Peak
Fujitsu VPP 5000 1156 8784 9600 (1 proc 300 MHz)Cray T90 (32 proc, 450 MHz) 29360 57600 (4 proc, 450 MHz) 1129 5735 7200IBM Power 4 (1 proc, 1300 MHz) 1074 2394 5200…Dell Itanium (4 proc, 800 MHz) 7358 12800 (2 proc, 800 MHz) 4504 6400 (1 proc, 800 MHz) 600 2382 3200
source: LINPACK Benchmark: http://www.netlib.org/performance/html/PDSreports.html
www.netlib.org, click on Performance DataBase Server
CS267 Dense Linear Algebra I.10 Demmel Fa 2001
Computational Chemistry – Ax = x
° Seek energy levels of a molecule, crystal, etc.• Solve Schroedinger’s Equation for energy levels = eigenvalues
• Discretize to get Ax = Bx, solve for eigenvalues and eigenvectors x
• A and B large, symmetric or Hermitian matrices (B positive definite)
• May want some or all eigenvalues and/or eigenvectors
° MP-Quest (Sandia NL)• Si and sapphire crystals of up to 3072 atoms
• Local Density Approximation to Schroedinger Equation
• A and B up to n=40000, complex Hermitian
• Need all eigenvalues and eigenvectors
• Need to iterate up to 20 times (for self-consistency)
° Implemented on Intel ASCI Red• 9200 Pentium Pro 200 processors (4600 Duals, a CLUMP)
• Overall application ran at 605 Gflops (out of 1800 Gflops peak),
• Eigensolver ran at 684 Gflops
• www.cs.berkeley.edu/~stanley/gbell/index.html
• Runner-up for Gordon Bell Prize at Supercomputing 98
° Same problem arises in astrophysics...
CS267 Dense Linear Algebra I.11 Demmel Fa 2001
Review of Gaussian Elimination (GE) for solving Ax=b
° Add multiples of each row to later rows to make A upper triangular
° Solve resulting triangular system Ux = c by substitution
… for each column i… zero it out below the diagonal by adding multiples of row i to later rowsfor i = 1 to n-1 … for each row j below row i for j = i+1 to n … add a multiple of row i to row j for k = i to n A(j,k) = A(j,k) - (A(j,i)/A(i,i)) * A(i,k)
CS267 Dense Linear Algebra I.12 Demmel Fa 2001
Refine GE Algorithm (1)
° Initial Version
° Remove computation of constant A(j,i)/A(i,i) from inner loop
… for each column i… zero it out below the diagonal by adding multiples of row i to later rowsfor i = 1 to n-1 … for each row j below row i for j = i+1 to n … add a multiple of row i to row j for k = i to n A(j,k) = A(j,k) - (A(j,i)/A(i,i)) * A(i,k)
for i = 1 to n-1 for j = i+1 to n m = A(j,i)/A(i,i) for k = i to n A(j,k) = A(j,k) - m * A(i,k)
CS267 Dense Linear Algebra I.13 Demmel Fa 2001
Refine GE Algorithm (2)
° Last version
° Don’t compute what we already know: zeros below diagonal in column i
for i = 1 to n-1 for j = i+1 to n m = A(j,i)/A(i,i) for k = i+1 to n A(j,k) = A(j,k) - m * A(i,k)
for i = 1 to n-1 for j = i+1 to n m = A(j,i)/A(i,i) for k = i to n A(j,k) = A(j,k) - m * A(i,k)
CS267 Dense Linear Algebra I.14 Demmel Fa 2001
Refine GE Algorithm (3)
° Last version
° Store multipliers m below diagonal in zeroed entries for later use
for i = 1 to n-1 for j = i+1 to n m = A(j,i)/A(i,i) for k = i+1 to n A(j,k) = A(j,k) - m * A(i,k)
for i = 1 to n-1 for j = i+1 to n A(j,i) = A(j,i)/A(i,i) for k = i+1 to n A(j,k) = A(j,k) - A(j,i) * A(i,k)
CS267 Dense Linear Algebra I.15 Demmel Fa 2001
Refine GE Algorithm (4)
° Last version for i = 1 to n-1 for j = i+1 to n A(j,i) = A(j,i)/A(i,i) for k = i+1 to n A(j,k) = A(j,k) - A(j,i) * A(i,k)
o Split Loopfor i = 1 to n-1 for j = i+1 to n A(j,i) = A(j,i)/A(i,i) for j = i+1 to n for k = i+1 to n A(j,k) = A(j,k) - A(j,i) * A(i,k)
CS267 Dense Linear Algebra I.16 Demmel Fa 2001
Refine GE Algorithm (5)
° Last version
° Express using matrix operations (BLAS)
for i = 1 to n-1 A(i+1:n,i) = A(i+1:n,i) * ( 1 / A(i,i) ) A(i+1:n,i+1:n) = A(i+1:n , i+1:n ) - A(i+1:n , i) * A(i , i+1:n)
for i = 1 to n-1 for j = i+1 to n A(j,i) = A(j,i)/A(i,i) for j = i+1 to n for k = i+1 to n A(j,k) = A(j,k) - A(j,i) * A(i,k)
CS267 Dense Linear Algebra I.17 Demmel Fa 2001
What GE really computes
° Call the strictly lower triangular matrix of multipliers M, and let L = I+M
° Call the upper triangle of the final matrix U
° Lemma (LU Factorization): If the above algorithm terminates (does not divide by zero) then A = L*U
° Solving A*x=b using GE• Factorize A = L*U using GE (cost = 2/3 n3 flops)
• Solve L*y = b for y, using substitution (cost = n2 flops)
• Solve U*x = y for x, using substitution (cost = n2 flops)
° Thus A*x = (L*U)*x = L*(U*x) = L*y = b as desired
for i = 1 to n-1 A(i+1:n,i) = A(i+1:n,i) / A(i,i) A(i+1:n,i+1:n) = A(i+1:n , i+1:n ) - A(i+1:n , i) * A(i , i+1:n)
CS267 Dense Linear Algebra I.18 Demmel Fa 2001
Problems with basic GE algorithm
° What if some A(i,i) is zero? Or very small?• Result may not exist, or be “unstable”, so need to pivot
° Current computation all BLAS 1 or BLAS 2, but we know that BLAS 3 (matrix multiply) is fastest (earlier lectures…)
for i = 1 to n-1 A(i+1:n,i) = A(i+1:n,i) / A(i,i) … BLAS 1 (scale a vector) A(i+1:n,i+1:n) = A(i+1:n , i+1:n ) … BLAS 2 (rank-1 update) - A(i+1:n , i) * A(i , i+1:n)
PeakBLAS 3
BLAS 2
BLAS 1
CS267 Dense Linear Algebra I.19 Demmel Fa 2001
Pivoting in Gaussian Elimination° A = [ 0 1 ] fails completely, even though A is “easy” [ 1 0 ]
° Illustrate problems in 3-decimal digit arithmetic:
A = [ 1e-4 1 ] and b = [ 1 ], correct answer to 3 places is x = [ 1 ] [ 1 1 ] [ 2 ] [ 1 ]
° Result of LU decomposition is
L = [ 1 0 ] = [ 1 0 ] … No roundoff error yet [ fl(1/1e-4) 1 ] [ 1e4 1 ]
U = [ 1e-4 1 ] = [ 1e-4 1 ] … Error in 4th decimal place [ 0 fl(1-1e4*1) ] [ 0 -1e4 ]
Check if A = L*U = [ 1e-4 1 ] … (2,2) entry entirely wrong [ 1 0 ]
° Algorithm “forgets” (2,2) entry, gets same L and U for all |A(2,2)|<5° Numerical instability° Computed solution x totally inaccurate
° Cure: Pivot (swap rows of A) so entries of L and U bounded
CS267 Dense Linear Algebra I.20 Demmel Fa 2001
Gaussian Elimination with Partial Pivoting (GEPP)° Partial Pivoting: swap rows so that each multiplier |L(i,j)| = |A(j,i)/A(i,i)| <= 1
for i = 1 to n-1
find and record k where |A(k,i)| = max{i <= j <= n} |A(j,i)| … i.e. largest entry in rest of column i if |A(k,i)| = 0 exit with a warning that A is singular, or nearly so elseif k != i swap rows i and k of A end if A(i+1:n,i) = A(i+1:n,i) / A(i,i) … each quotient lies in [-1,1] A(i+1:n,i+1:n) = A(i+1:n , i+1:n ) - A(i+1:n , i) * A(i , i+1:n)
° Lemma: This algorithm computes A = P*L*U, where P is a permutation matrix° Since each entry of |L(i,j)| <= 1, this algorithm is considered numerically stable° For details see LAPACK code at www.netlib.org/lapack/single/sgetf2.f
CS267 Dense Linear Algebra I.21 Demmel Fa 2001
Converting BLAS2 to BLAS3 in GEPP
° Blocking• Used to optimize matrix-multiplication
• Harder here because of data dependencies in GEPP
° Delayed Updates• Save updates to “trailing matrix” from several consecutive BLAS2
updates
• Apply many saved updates simultaneously in one BLAS3 operation
° Same idea works for much of dense linear algebra• Open questions remain
° Need to choose a block size b• Algorithm will save and apply b updates
• b must be small enough so that active submatrix consisting of b columns of A fits in cache
• b must be large enough to make BLAS3 fast
CS267 Dense Linear Algebra I.22 Demmel Fa 2001
Blocked GEPP (www.netlib.org/lapack/single/sgetrf.f)for ib = 1 to n-1 step b … Process matrix b columns at a time end = ib + b-1 … Point to end of block of b columns apply BLAS2 version of GEPP to get A(ib:n , ib:end) = P’ * L’ * U’ … let LL denote the strict lower triangular part of A(ib:end , ib:end) + I
A(ib:end , end+1:n) = LL-1 * A(ib:end , end+1:n) … update next b rows of U A(end+1:n , end+1:n ) = A(end+1:n , end+1:n ) - A(end+1:n , ib:end) * A(ib:end , end+1:n) … apply delayed updates with single matrix-multiply … with inner dimension b
(For a correctness proof, see on-lines notes.)
CS267 Dense Linear Algebra I.23 Demmel Fa 2001
Efficiency of Blocked GEPP
CS267 Dense Linear Algebra I.24 Demmel Fa 2001
Overview of LAPACK
° Standard library for dense/banded linear algebra• Linear systems: A*x=b
• Least squares problems: minx || A*x-b ||2• Eigenvalue problems: Ax =x, Ax = Bx
• Singular value decomposition (SVD): A = UVT
° Algorithms reorganized to use BLAS3 as much as possible
° Basis of math libraries on many computers, Matlab 6
° Many algorithmic innovations remain• Projects available
• Automatic optimization
• Quadtree matrix data structures for locality
• New eigenvalue algorithms
CS267 Dense Linear Algebra I.25 Demmel Fa 2001
Performance of LAPACK (n=1000)
CS267 Dense Linear Algebra I.26 Demmel Fa 2001
Performance of LAPACK (n=100)
CS267 Dense Linear Algebra I.27 Demmel Fa 2001
Recursive Algorithms
° Still uses delayed updates, but organized differently• (formulas on board)
° Can exploit recursive data layouts• 3x speedups on least squares for tall, thin matrices
° Theoretically optimal memory hierarchy performance
° See references at• http://lawra.uni-c.dk/lawra/index.html
• http://www.cs.berkeley.edu/~yelick/cs267f01/lectures/Lect14.html
• http://www.cs.umu.se/research/parallel/recursion/recursive-qr/
CS267 Dense Linear Algebra I.28 Demmel Fa 2001
Recursive Algorithms – Limits
° Two kinds of dense matrix compositions
° One Sided • Sequence of simple operations applied on left of matrix
• Gaussian Elimination: A = L*U or A = P*L*U
- Symmetric Gaussian Elimination: A = L*D*LT
- Cholesky: A = L*LT
• QR Decomposition for Least Squares: A = Q*R
• Can be nearly 100% BLAS 3
• Susceptible to recursive algorithms
° Two Sided• Sequence of simple operations applied on both sides, alternating
• Eigenvalue algorithms, SVD
• At least ~25% BLAS 2
• Seem impervious to recursive approach
• Some recent progress on SVD (25% vs 50% BLAS2)
CS267 Dense Linear Algebra I.29 Demmel Fa 2001
Parallelizing Gaussian Elimination
° Recall parallelization steps from earlier lecture• Decomposition: identify enough parallel work, but not too much
• Assignment: load balance work among threads
• Orchestrate: communication and synchronization
• Mapping: which processors execute which threads
° Decomposition• In BLAS 2 algorithm nearly each flop in inner loop can be done in
parallel, so with n2 processors, need 3n parallel steps
• This is too fine-grained, prefer calls to local matmuls instead
• Need to discuss parallel matrix multiplication
° Assignment• Which processors are responsible for which submatrices?
for i = 1 to n-1 A(i+1:n,i) = A(i+1:n,i) / A(i,i) … BLAS 1 (scale a vector) A(i+1:n,i+1:n) = A(i+1:n , i+1:n ) … BLAS 2 (rank-1 update) - A(i+1:n , i) * A(i , i+1:n)
CS267 Dense Linear Algebra I.30 Demmel Fa 2001
Different Data Layouts for Parallel GE (on 4 procs)
The winner!
Bad load balance:P0 idle after firstn/4 steps
Load balanced, but can’t easilyuse BLAS2 or BLAS3
Can trade load balanceand BLAS2/3 performance by choosing b, butfactorization of blockcolumn is a bottleneck
Complicated addressing
CS267 Dense Linear Algebra I.31 Demmel Fa 2001
PDGEMM = PBLAS routine for matrix multiply
Observations: For fixed N, as P increases Mflops increases, but less than 100% efficiency For fixed P, as N increases, Mflops (efficiency) rises
DGEMM = BLAS routine for matrix multiply
Maximum speed for PDGEMM = # Procs * speed of DGEMM
Observations (same as above): Efficiency always at least 48% For fixed N, as P increases, efficiency drops For fixed P, as N increases, efficiency increases
CS267 Dense Linear Algebra I.32 Demmel Fa 2001
Review: BLAS 3 (Blocked) GEPP
for ib = 1 to n-1 step b … Process matrix b columns at a time end = ib + b-1 … Point to end of block of b columns apply BLAS2 version of GEPP to get A(ib:n , ib:end) = P’ * L’ * U’ … let LL denote the strict lower triangular part of A(ib:end , ib:end) + I
A(ib:end , end+1:n) = LL-1 * A(ib:end , end+1:n) … update next b rows of U A(end+1:n , end+1:n ) = A(end+1:n , end+1:n ) - A(end+1:n , ib:end) * A(ib:end , end+1:n) … apply delayed updates with single matrix-multiply … with inner dimension b
BLAS 3
CS267 Dense Linear Algebra I.33 Demmel Fa 2001
Review: Row and Column Block Cyclic Layout
processors and matrix blocksare distributed in a 2d array
pcol-fold parallelismin any column, and calls to the BLAS2 and BLAS3 on matrices of size brow-by-bcol
serial bottleneck is eased
need not be symmetric in rows andcolumns
CS267 Dense Linear Algebra I.34 Demmel Fa 2001
Distributed GE with a 2D Block Cyclic Layout
block size b in the algorithm and the block sizes brow and bcol in the layout satisfy b=brow=bcol.
shaded regions indicate busy processors or communication performed.
unnecessary to have a barrier between each step of the algorithm, e.g.. step 9, 10, and 11 can be pipelined
CS267 Dense Linear Algebra I.35 Demmel Fa 2001
Distributed GE with a 2D Block Cyclic Layout
CS267 Dense Linear Algebra I.36 Demmel Fa 2001
Ma
trix
mu
ltip
ly o
f
gre
en
= g
ree
n -
blu
e *
pin
k
CS267 Dense Linear Algebra I.37 Demmel Fa 2001
PDGESV = ScaLAPACK parallel LU routine
Since it can run no faster than its inner loop (PDGEMM), we measure:Efficiency = Speed(PDGESV)/Speed(PDGEMM)
Observations: Efficiency well above 50% for large enough problems For fixed N, as P increases, efficiency decreases (just as for PDGEMM) For fixed P, as N increases efficiency increases (just as for PDGEMM) From bottom table, cost of solving Ax=b about half of matrix multiply for large enough matrices. From the flop counts we would
expect it to be (2*n3)/(2/3*n3) = 3 times faster, but communication makes it a little slower.
CS267 Dense Linear Algebra I.38 Demmel Fa 2001
CS267 Dense Linear Algebra I.39 Demmel Fa 2001
CS267 Dense Linear Algebra I.40 Demmel Fa 2001
Scales well, nearly full machine speed
CS267 Dense Linear Algebra I.41 Demmel Fa 2001
Old version,pre 1998 Gordon Bell Prize
Still have ideas to accelerateProject Available!
Old Algorithm, plan to abandon
CS267 Dense Linear Algebra I.42 Demmel Fa 2001
The “Holy Grail” of Eigensolvers for Symmetric matrices
To be propagated throughout LAPACK and ScaLAPACK
CS267 Dense Linear Algebra I.43 Demmel Fa 2001
Have good ideas to speedupProject available!
Hardest of all to parallelize
CS267 Dense Linear Algebra I.44 Demmel Fa 2001
Out-of-core means matrix lives on disk; too big for main mem
Much harder to hide latency of disk
QR much easier than LU because no pivoting needed for QR
CS267 Dense Linear Algebra I.45 Demmel Fa 2001
A small software project ...
CS267 Dense Linear Algebra I.46 Demmel Fa 2001
Extra Slides
CS267 Dense Linear Algebra I.47 Demmel Fa 2001
Parallelizing Gaussian Elimination
° Recall parallelization steps from Lecture 3• Decomposition: identify enough parallel work, but not too much
• Assignment: load balance work among threads
• Orchestrate: communication and synchronization
• Mapping: which processors execute which threads
° Decomposition• In BLAS 2 algorithm nearly each flop in inner loop can be done in
parallel, so with n2 processors, need 3n parallel steps
• This is too fine-grained, prefer calls to local matmuls instead
for i = 1 to n-1 A(i+1:n,i) = A(i+1:n,i) / A(i,i) … BLAS 1 (scale a vector) A(i+1:n,i+1:n) = A(i+1:n , i+1:n ) … BLAS 2 (rank-1 update) - A(i+1:n , i) * A(i , i+1:n)
CS267 Dense Linear Algebra I.48 Demmel Fa 2001
Assignment of parallel work in GE
° Think of assigning submatrices to threads, where each thread responsible for updating submatrix it owns
• “owner computes” rule natural because of locality
° What should submatrices look like to achieve load balance?
CS267 Dense Linear Algebra I.49 Demmel Fa 2001
Different Data Layouts for Parallel GE (on 4 procs)
The winner!
Bad load balance:P0 idle after firstn/4 steps
Load balanced, but can’t easilyuse BLAS2 or BLAS3
Can trade load balanceand BLAS2/3 performance by choosing b, butfactorization of blockcolumn is a bottleneck
Complicated addressing
CS267 Dense Linear Algebra I.50 Demmel Fa 2001
The main steps in the solution process are
Fill: computing the matrix elements of A
Factor: factoring the dense matrix A
Solve: solving for one or more excitations b
Field Calc: computing the fields scattered from the object
Computational Electromagnetics (MOM)
CS267 Dense Linear Algebra I.51 Demmel Fa 2001
Analysis of MOM for Parallel Implementation
Task Work Parallelism Parallel Speed
Fill O(n**2) embarrassing low
Factor O(n**3) moderately diff. very high
Solve O(n**2) moderately diff. high
Field Calc. O(n) embarrassing high
CS267 Dense Linear Algebra I.52 Demmel Fa 2001
BLAS 3 (Blocked) GEPP, using Delayed Updates
for ib = 1 to n-1 step b … Process matrix b columns at a time end = ib + b-1 … Point to end of block of b columns apply BLAS2 version of GEPP to get A(ib:n , ib:end) = P’ * L’ * U’ … let LL denote the strict lower triangular part of A(ib:end , ib:end) + I
A(ib:end , end+1:n) = LL-1 * A(ib:end , end+1:n) … update next b rows of U A(end+1:n , end+1:n ) = A(end+1:n , end+1:n ) - A(end+1:n , ib:end) * A(ib:end , end+1:n) … apply delayed updates with single matrix-multiply … with inner dimension b
BLAS 3
CS267 Dense Linear Algebra I.53 Demmel Fa 2001
BLAS2 version of Gaussian Elimination with Partial Pivoting (GEPP)
for i = 1 to n-1
find and record k where |A(k,i)| = max{i <= j <= n} |A(j,i)| … i.e. largest entry in rest of column i if |A(k,i)| = 0 exit with a warning that A is singular, or nearly so elseif k != i swap rows i and k of A end if A(i+1:n,i) = A(i+1:n,i) / A(i,i) … each quotient lies in [-1,1] … BLAS 1 A(i+1:n,i+1:n) = A(i+1:n , i+1:n ) - A(i+1:n , i) * A(i , i+1:n) … BLAS 2, most work in this line
CS267 Dense Linear Algebra I.54 Demmel Fa 2001
How to proceed:
° Consider basic parallel matrix multiplication algorithms on simple layouts
• Performance modeling to choose best one
- Time (message) = latency + #words * time-per-word
- = + n*
° Briefly discuss block-cyclic layout
° PBLAS = Parallel BLAS
CS267 Dense Linear Algebra I.55 Demmel Fa 2001
Parallel Matrix Multiply
° Computing C=C+A*B
° Using basic algorithm: 2*n3 Flops
° Variables are:• Data layout
• Topology of machine
• Scheduling communication
° Use of performance models for algorithm design
CS267 Dense Linear Algebra I.56 Demmel Fa 2001
1D Layout
° Assume matrices are n x n and n is divisible by p
° A(i) refers to the n by n/p block column that processor i owns (similiarly for B(i) and C(i))
° B(i,j) is the n/p by n/p sublock of B(i) • in rows j*n/p through (j+1)*n/p
° Algorithm uses the formulaC(i) = C(i) + A*B(i) = C(i) + A(j)*B(j,i)
p0 p1 p2 p3 p5 p4 p6 p7
j
CS267 Dense Linear Algebra I.57 Demmel Fa 2001
Matrix Multiply: 1D Layout on Bus or Ring
° Algorithm uses the formulaC(i) = C(i) + A*B(i) = C(i) + A(j)*B(j,i)
° First consider a bus-connected machine without broadcast: only one pair of processors can communicate at a time (ethernet)
° Second consider a machine with processors on a ring: all processors may communicate with nearest neighbors simultaneously
j
CS267 Dense Linear Algebra I.58 Demmel Fa 2001
Naïve MatMul for 1D layout on Bus without Broadcast
Naïve algorithm:
C(myproc) = C(myproc) + A(myproc)*B(myproc,myproc)
for i = 0 to p-1
for j = 0 to p-1 except i
if (myproc == i) send A(i) to processor j
if (myproc == j)
receive A(i) from processor i
C(myproc) = C(myproc) + A(i)*B(i,myproc)
barrier
Cost of inner loop:
computation: 2*n*(n/p)2 = 2*n3/p2
communication: + *n2 /p
CS267 Dense Linear Algebra I.59 Demmel Fa 2001
Naïve MatMul (continued)
Cost of inner loop:
computation: 2*n*(n/p)2 = 2*n3/p2
communication: + *n2 /p … approximately
Only 1 pair of processors (i and j) are active on any iteration,
an of those, only i is doing computation
=> the algorithm is almost entirely serial
Running time: (p*(p-1) + 1)*computation + p*(p-1)*communication
~= 2*n3 + p2* + p*n2*
this is worse than the serial time and grows with p
CS267 Dense Linear Algebra I.60 Demmel Fa 2001
Better Matmul for 1D layout on a Processor Ring
° Proc i can communicate with Proc(i-1) and Proc(i+1) simultaneously for all i
Copy A(myproc) into TmpC(myproc) = C(myproc) + T*B(myproc , myproc)for j = 1 to p-1 Send Tmp to processor myproc+1 mod p Receive Tmp from processor myproc-1 mod p C(myproc) = C(myproc) + Tmp*B( myproc-j mod p , myproc)
° Same idea as for gravity in simple sharks and fish algorithm
° Time of inner loop = 2*( + *n2/p) + 2*n*(n/p)2
° Total Time = 2*n* (n/p)2 + (p-1) * Time of inner loop
~ 2*n3/p + 2*p* + 2**n2
° Optimal for 1D layout on Ring or Bus, even with with Broadcast: Perfect speedup for arithmetic A(myproc) must move to each other processor, costs at least (p-1)*cost of sending n*(n/p) words
° Parallel Efficiency = 2*n3 / (p * Total Time) = 1/(1 + * p2/(2*n3) + * p/(2*n) ) = 1/ (1 + O(p/n))
Grows to 1 as n/p increases (or and shrink)
CS267 Dense Linear Algebra I.61 Demmel Fa 2001
MatMul with 2D Layout
° Consider processors in 2D grid (physical or logical)
° Processors can communicate with 4 nearest neighbors
• Broadcast along rows and columns
p(0,0) p(0,1) p(0,2)
p(1,0) p(1,1) p(1,2)
p(2,0) p(2,1) p(2,2)
CS267 Dense Linear Algebra I.62 Demmel Fa 2001
Cannon’s Algorithm
… C(i,j) = C(i,j) + A(i,k)*B(k,j)
… assume s = sqrt(p) is an integer
forall i=0 to s-1 … “skew” A
left-circular-shift row i of A by i
… so that A(i,j) overwritten by A(i,(j+i)mod s)
forall i=0 to s-1 … “skew” B
up-circular-shift B column i of B by i
… so that B(i,j) overwritten by B((i+j)mod s), j)
for k=0 to s-1 … sequential
forall i=0 to s-1 and j=0 to s-1 … all processors in parallel
C(i,j) = C(i,j) + A(i,j)*B(i,j)
left-circular-shift each row of A by 1
up-circular-shift each row of B by 1
k
CS267 Dense Linear Algebra I.63 Demmel Fa 2001
Communication in Cannon
C(1,2) = A(1,0) * B(0,2) + A(1,1) * B(1,2) + A(1,2) * B(2,2)
CS267 Dense Linear Algebra I.64 Demmel Fa 2001
Cost of Cannon’s Algorithm
forall i=0 to s-1 … recall s = sqrt(p)
left-circular-shift row i of A by i … cost = s*( + *n2/p)
forall i=0 to s-1
up-circular-shift B column i of B by i … cost = s*( + *n2/p)
for k=0 to s-1
forall i=0 to s-1 and j=0 to s-1
C(i,j) = C(i,j) + A(i,j)*B(i,j) … cost = 2*(n/s)3 = 2*n3/p3/2
left-circular-shift each row of A by 1 … cost = + *n2/p
up-circular-shift each row of B by 1 … cost = + *n2/p
° Total Time = 2*n3/p + 4* s* + 4**n2/s ° Parallel Efficiency = 2*n3 / (p * Total Time) = 1/( 1 + * 2*(s/n)3 + * 2*(s/n) ) = 1/(1 + O(sqrt(p)/n)) ° Grows to 1 as n/s = n/sqrt(p) = sqrt(data per processor) grows° Better than 1D layout, which had Efficiency = 1/(1 + O(p/n))
CS267 Dense Linear Algebra I.65 Demmel Fa 2001
Drawbacks to Cannon
° Hard to generalize for• p not a perfect square
• A and B not square
• Dimensions of A, B not perfectly divisible by s=sqrt(p)
• A and B not “aligned” in the way they are stored on processors
• block-cyclic layouts
° Memory hog (extra copies of local matrices)
CS267 Dense Linear Algebra I.66 Demmel Fa 2001
SUMMA = Scalable Universal Matrix Multiply Algorithm
° Slightly less efficient, but simpler and easier to generalize
° Presentation from van de Geijn and Watts• www.netlib.org/lapack/lawns/lawn96.ps
• Similar ideas appeared many times
° Used in practice in PBLAS = Parallel BLAS• www.netlib.org/lapack/lawns/lawn100.ps
CS267 Dense Linear Algebra I.67 Demmel Fa 2001
SUMMA
* =C(I,J)I
J
A(I,k)
k
k
B(k,J)
° I, J represent all rows, columns owned by a processor° k is a single row or column (or a block of b rows or columns)° C(I,J) = C(I,J) + k A(I,k)*B(k,J)
° Assume a pr by pc processor grid (pr = pc = 4 above) For k=0 to n-1 … or n/b-1 where b is the block size … = # cols in A(I,k) and # rows in B(k,J)
for all I = 1 to pr … in parallel
owner of A(I,k) broadcasts it to whole processor row
for all J = 1 to pc … in parallel
owner of B(k,J) broadcasts it to whole processor column Receive A(I,k) into Acol Receive B(k,J) into Brow C( myproc , myproc ) = C( myproc , myproc) + Acol * Brow
CS267 Dense Linear Algebra I.68 Demmel Fa 2001
SUMMA performance
For k=0 to n/b-1 for all I = 1 to s … s = sqrt(p) owner of A(I,k) broadcasts it to whole processor row … time = log s *( + * b*n/s), using a tree for all J = 1 to s owner of B(k,J) broadcasts it to whole processor column … time = log s *( + * b*n/s), using a tree Receive A(I,k) into Acol Receive B(k,J) into Brow C( myproc , myproc ) = C( myproc , myproc) + Acol * Brow
… time = 2*(n/s)2*b
° Total time = 2*n3/p + * log p * n/b + * log p * n2 /s
° Parallel Efficiency = 1/(1 + * log p * p / (2*b*n2) + * log p * s/(2*n) )° ~Same term as Cannon, except for log p factor log p grows slowly so this is ok° Latency () term can be larger, depending on b When b=1, get * log p * n As b grows to n/s, term shrinks to * log p * s (log p times Cannon)° Temporary storage grows like 2*b*n/s° Can change b to tradeoff latency cost with memory
CS267 Dense Linear Algebra I.69 Demmel Fa 2001
Summary of Parallel Matrix Multiply Algorithms
° 1D Layout• Bus without broadcast - slower than serial
• Nearest neighbor communication on a ring (or bus with broadcast): Efficiency = 1/(1 + O(p/n))
° 2D Layout• Cannon
- Efficiency = 1/(1+O(p1/2 /n))
- Hard to generalize for general p, n, block cyclic, alignment
• SUMMA
- Efficiency = 1/(1 + O(log p * p / (b*n2) + log p * p1/2 /n))
- Very General
- b small => less memory, lower efficiency
- b large => more memory, high efficiency
• Gustavson et al
- Efficiency = 1/(1 + O(p1/3 /n) ) ??
top related