curso extreme

EXTREME NETWORKS

OVERVIEW

• Capacidad de restauración de procesos por

separado:

– Telnet (11.0) – SSH / SCP (11.0) – SNMP (11.0) – TFTP (11.0) – HTTPD (11.3) – XML/SOAP (12.0) – CNA Agent (11.2) – Network Login (11.3) – LLDP (11.4) – EAPS (11.0) – VRRP (11.0) – OSPF (with Graceful Restart extensions,

11.3) – BGP (with Graceful Restart extensions,

11.4) – IS-IS (with Graceful Restart extensions,

12.1)

EXTREME XOS – RESTAURACIÓN DE PROCESOS

EXTREME XOS – SIMPLIFICADO Y SENCILLO

10.1 12.1 11.0 11.1 11.2 11.3 11.4 11.5 11.6 12.0

2003

En comparación con otros fabricantes donde…

Cada producto tiene su propio SW

El SW no es modular

Complicadas releases como las descritas en la web de este otro fabricante

ExtremeXOS simplifica los upgrades de su SW mediante:

Ciclos de release predecibles

El mismo SO y línea de release para toda la gamas de switches

SUMMIT X150 – FRONT AND REAR VIEW

• 8.8 Gbps – 13.6 Gbps de ancho de banda para trama de conmutación, y velocidad de retransmisión de paquetes de Capa 2 de 6.5 Mpps – 10.1 Mpps •Tamaño máximo de paquete de 9,216 bytes (trama Jumbo) • 8 colas/puertos de QoS • 4,094 VLANs (Puerto, IEEE 802.1Q, basadas en MAC) • ACLs basadas en hardware con clasificación de Capa 2 – Capa 4, incluyendo ACL IPv6

TRAINING MADE EXTREME

The Clear Alternative

-Free Content -Online ENA -Sandbox -Certification

Instructor, Student and Lab Guides all available online, free of charge, to enable self-learning

Nominal testing fee for certification either online for ENA or proctored for Extreme Networks Specialist (ENS)

Online Extreme Networks Associate (ENA) training allowing you to learn in a directed manner at the entry level

Freely available (first come, first serve) environment to practice, reserved time available for fee

LOCAL AND REMOTE ACCESS

configure snmp sysname Training_Switch

configure vlan mgmt ipaddress <ipaddress> {<netmask>} Examples: configure vlan mgmt ipaddress 10.0.0.1 255.255.255.0

1- Download the software module from your TFTP server or external compact flash memory card using the following command: download image [[<hostname> | <ipaddress>] <filename> {{vr} <vrname>} | memorycard <filename>] {<partition>} {msm <slotid>} {slot <slotid>} 2 - Activate the installed modular package, if installed on the active partition, using the following command: run update 3 Terminate and restart the processes associated with the software module using one of the following commands: restart process [class <cname> | <name> {msm <slot>}] (modular switches) restart process [class <cname> | <name> {slot <slot>}] (SummitStack)

INSTALATION SSH MODULE - STEPS

REBOOT, SAVE AND RECOVERY

CONFIGURATION

REBOOT, SAVE AND RECOVERY

CONFIGURATION

ACCOUNTS CREATE AND

RECOVERY

BootROM Menu Options

The BootROM of the switch initializes certain important switch variables during

the boot process.

If necessary, the BootROM can be upgraded using TFTP.

For disaster recovery purposes (i.e. in the event the switch does not boot

properly), you can download a rescue image from a TFTP server by entering

the dowload image command from the BootROM menu.

INTRODUCCION TO VLANS

STATIC ROUTES

CONFIGURATION LAYER 1

TEST LAYER 1 AND LAYER 2

LOGS

POE CONFIGURATION AND

VERIFICATION

Here is represented the general command to verify the status of

POE

WORKING WITH PROCESS

ACL AND POLICES

MAKING ACL TEST IN YOUR SWITCH:

Your policy is the next :

entry test{

if{

protocol icmp;

icmp-type echo-request;

ethernet-source-address 1C:75:08:44:70:7E; # You shuld change this

source address

}

then{

deny;

}

}

QoS