curved bench designs installation instructions · curved bench designs installation instructions...
Post on 15-Mar-2020
1 Views
Preview:
TRANSCRIPT
CURVED BENCH DESIGNSINSTALLATION INSTRUCTIONS
Option 1Closed End
Option 3Full Seat End
Option 2Open End
Option 4Column End
Option 2 - Open End Shown Above
2 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N SK E Y S T O N E O U T D O O R L I V I N G • C U R V E D B E N C H D E S I G N S
INDEX
Materials List ................................................................................... 3
Foundation and Courses 1 through 4 ........................................... 4-8
Closed End Option Isometric ....................................................... 9
Courses 4 (capping) through 6 ...................................................... 10-13
Elevation Views ............................................................................... 14
Open End Option Isometric .......................................................... 15
Courses 4 (capping) through 6 ...................................................... 16-19
Elevation Views ............................................................................... 20
Common Courses
Option 2
Option 3
Option 1
Full Seat End Option Isometric ..................................................... 21
Courses 4 (capping) through 6 ...................................................... 22-25
Elevation Views ............................................................................... 26
Column End Option Isometric ...................................................... 27
Courses 4 (capping) through 8 ...................................................... 28-34
Elevation Views ............................................................................... 35
Option 4Closed End Design
Open End Design
Full Seat End Design
Column End Design
Safety Glasses
BASIC TOOLS
safety alterationslayout finishinglevelingbase
Gloves Stone Chisel
MalletLayout Stakes
Line Caulking Gun
Exterior Grade Concrete Adhesive
Level MalletShovel Wheelbarrow HandCompactor
ConcreteSaw
Keystone Step-by-StepKits 3www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SK E Y S T O N E O U T D O O R L I V I N G • C U R V E D B E N C H D E S I G N S
Option 1
Notes: • All Keystone Country Manor/Stonegate units are 6"h x 10"d. "Keystone Cap units are 3"h x 11"d* Keystone recommends the use of its interlocking pins when alignment allows. Use pins in conjunction with exterior grade construction adhesive to maximize stability of your structure.
Option 2
Option 3
Option 4
You will need: • 128 - 16"/14"w Large units • 93 - 12"/10"w Medium units• 193 - 6"/4"w Small units• 100 - 12"/10"w Cap units• Bench/Column Pad Material - 47.6 cf• Bench Infill Material - 35.6 cf• Column Infill Material - 5.6 cf• Keystone Interlocking Pins* • Exterior Construction Grade Adhesive*• Fire pit quantities not included
Closed End Design
Open End Design
Full Seat End Design
Column End Design
You will need: • 98 - 16"/14"w Large units • 93 - 12"/10"w Medium units• 163 - 6"/4"w Small units• 94 - 12"/10"w Cap units• Bench Pad Material - 47.6 cf• Bench Infill Material - 38.4 cf• Keystone Interlocking Pins* • Exterior Construction Grade Adhesive*• Fire pit quantities not included
You will need: • 101 - 16"/14"w Large units • 93 - 12"/10"w Medium units• 170 - 6"/4"w Small units• 94 - 12"/10"w Cap units• Bench Pad Material - 47.6 cf• Bench Infill Material - 38.4 cf• Keystone Interlocking Pins* • Exterior Construction Grade Adhesive*• Fire pit quantities not included
You will need: • 106 - 16"/14"w Large units • 93 - 12"/10"w Medium units• 171 - 6"/4"w Small units• 94 - 12"/10"w Cap units• Bench Pad Material - 47.6 cf• Bench Infill Material - 38.4 cf• Keystone Interlocking Pins*• Exterior Construction Grade Adhesive*• Fire pit quantities not included
4 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Co
mm
on C
ourses
Keystone Step-by-StepKits 5www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SC
om
mo
n Co
urses
Note:If required, place geotextile fabric around the perimeter of the inside open area against the block units and up to the 4th course capping course to stop the migration of the fill material between the block units.
Block Cutting Note:Block units to be cut are labeled with angular hatching.
6 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Co
mm
on C
ourses
Block Cutting Note:Block units to be cut are labeled with angular hatching.
Keystone Step-by-StepKits 7www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SC
om
mo
n Co
urses
Block Cutting Note:Block units to be cut are labeled with angular hatching.
8 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Co
mm
on C
ourses
Block Cutting Note:Block units to be cut are labeled with angular hatching.
Go to page 9Option 1Closed End Design
Option 2Open End Design
Option 3Full Seat End Design
Option 4Column End Design
Go to page 15
Go to page 21
Go to page 27
To complete your kit, choose one of the following end options.
Keystone Step-by-StepKits 9www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 1
You have chosen the Closed End Option 1 for your kit. Complete the following courses 4 (capping) - 6 on the Red tabs to achieve this option.
10 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 1
Block Cutting Note:Cap units to be cut are labeled with angular hatching.
Bench Capping Note:Cut cap units tight to the face of the 5th course back wall block units for best appearance.
Keystone Step-by-StepKits 11www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 1
Block Cutting Note:Block units to be cut are labeled with angular hatching.
12 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 1
Block Cutting Note:Block units to be cut are labeled with angular hatching.
Keystone Step-by-StepKits 13www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 1
Block Cutting Note:Cap units to be cut or hard split are labeled with angular hatching.
14 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 1
Keystone Step-by-StepKits 15www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N S
You have chosen the Open End Option 2 for your kit. Complete the following courses 4 (capping) - 6 on the Green tabs to achieve this option.
Op
tion 2
16 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 2
Block Cutting Note:Cap units to be cut are labeled with angular hatching.
Bench Capping Note:Cut cap units tight to the face of the 5th course back wall block units for best appearance.
Keystone Step-by-StepKits 17www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 2
Block Cutting Note:Block units to be cut are labeled with angular hatching.
18 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 2
Block Cutting Note:Block units to be cut are labeled with angular hatching.
Keystone Step-by-StepKits 19www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 2
Block Cutting Note:Cap units to be cut or hard split are labeled with angular hatching.
20 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 2
Keystone Step-by-StepKits 21www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 3
You have chosen the Full Seat End Option 3 for your kit. Complete the following courses 4 (capping) - 6 on the Orange tabs to achieve this option.
22 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 3
Block Cutting Note:Cap units to be cut are labeled with angular hatching.
Bench Capping Note:Cut cap units tight to the face of the 5th course back wall block units for best appearance.
Keystone Step-by-StepKits 23www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 3
Block Cutting Note:Block units to be cut are labeled with angular hatching.
24 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 3
Block Cutting Note:Block units to be cut are labeled with angular hatching.
Keystone Step-by-StepKits 25www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 3
Block Cutting Note:Cap units to be cut or hard split are labeled with angular hatching.
26 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 3
Keystone Step-by-StepKits 27www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N S
You have chosen the Column End Option 4 for your kit. Complete the following courses 4 (capping) - 8 on the Blue tabs to achieve this option.
Op
tion 4
28 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 4
Block Cutting Note:Cap units to be cut are labeled with angular hatching.
Bench Capping Note:Cut cap units tight to the face of the 5th course back wall block units for best appearance.
Keystone Step-by-StepKits 29www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 4
Block Cutting Note:Block units to be cut are labeled with angular hatching.
30 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 4
Block Cutting Note:Block units to be cut are labeled with angular hatching.
Keystone Step-by-StepKits 31www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 4
Block Cutting Note:Cap units to be cut or hard split are labeled with angular hatching.
32 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 4
Block Cutting Note:Block units to be cut are labeled with angular hatching.
Keystone Step-by-StepKits 33www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 4
Block Cutting Note:Block units to be cut are labeled with angular hatching.
34 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Op
tion 4
Block Cutting Note:Block units to be cut or hard split are labeled with angular hatching.
Keystone Step-by-StepKits 35www.Keystonewalls.com
C O U R S E B Y C O U R S E I N S T R U C T I O N SO
ptio
n 4
36 Keystone Step-by-StepKits
C O U R S E B Y C O U R S E I N S T R U C T I O N S
©2017 Keystone Retaining Wall Systems LLC Patents Pending SbsCurvedBenchDesigns-0617
We reserve the right to improve our products and make changes in the specifications and design without notice. The information contained herein has been compiled by KEYSTONE and to the best of our knowledge, accurately represents the KEYSTONE product use in the applications which are illustrated. Final determination of the suitability for the use contemplated and its manner of use are the sole responsibility of the user.
Keystone Retaining Wall Systems LLC A Contech Company
4444 West 78th Street • Minneapolis, MN 55435 (952) 897-1040 • www.keystonewalls.com
ENGINEERED SOLUTIONS
Don’t forget to check out all of our Keystone Outdoor Living Designs on keystonewalls.com.
Outdoor Kitchen Designs Fireplaces Columns Fire Pits Water Feature Outdoor Table
top related