custom products - conestoga wood specialties, cabinet doors and
Post on 03-Feb-2022
3 Views
Preview:
TRANSCRIPT
5.1
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
Premium Edge Profiles: $14 additional charge per door.These three profiles require 2 additional working days.
LC-2*3/4" and 1"
L-059*3/4" and 1"
PRS-2*3/4" and 1"
V-2*3/4" and 1"
B3/4" onlyRabbet: 7/16" deep 3/8" high
B-2*3/4" and 1"
C3/4" onlyRabbet: 7/16" deep 3/8" high
C-23/4" and 1"
E-23/4" and 1"
FP3/4" only
H3/4" onlyRabbet: 7/16" deep 3/8" high
H-23/4" and 1"
Machine Edge*3/4" and 1"
J-23/4" and 1"
3/8" radius
1/8" radius
L-149*3/4" and 1"
L-0613/4" and 1"
L-2533/4" and 1"5 degree back bevel
L-6863/4" and 1"5 degree back bevel
Images shown are not to scale.* Drilling for concealed hinges is available on doors with these profiles.** Designed for use on a “finished end panel.” Can be used with Conestoga Cabinet Systems.
Edge Profiles
L-034*3/4" and 1"
CFP-2*3/4" and 1"
L-1203/4" and 1"
L-281*3/4" and 1"
L-7723/4" and 1"
L-803*3/4" and 1"
L-9473/4" and 1"
RC-23/4" and 1"
L-3043/4" and 1"
LC-Inset*3/4" and 1"
FEP**3/4" onlyRabbet: 11/16" deep 1/8" high
L-297*3/4" and 1"
5.2
De
sig
n O
pt
iOn
sC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
P008 Raise3/4" and 1" Doors
Panel Raises
Framing Beads
Regular3/4" and 1"
Square3/4" and 1"
Elite3/4" only
Slant3/4" and 1" Doors
G-Cove3/4" and 1" Doors
M-Bead3/4" and 1" Doors
RM-Raise3/4" and 1" Doors
Presidential Raise3/4" Doors only
Louis XIII Raise3/4" Doors only
Reverse G-Cove3/4" and 1" Doors
Ogee3/4" and 1"
Not all framing beads and panel raises are available with all door designs. Design charges include choice of framing bead and panel raise.
All published raises are available in hybrid products. Hybrid products consist of MDF panel and solid wood framing.3/4" panel raises measure 5/8" finished thickness except reverse G-cove and P-057 which measures 3/8" thick.1" panel raises measure 3/4" finished thickness except reverse G-cove and P-057 which measures 1/2" thick.Images shown are not to scale.
P-0573/4" and 1" Doors
P-6023/4" and 1" Doors
5.3
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
Mullion Doors
Conestoga offers a wide variety of mullion configurations and options. Mullions illustrated on the following pages are only a representation of the available patterns. Contact your Sales Representative or our Special Designs Department for additional mullion information.
Pricing
To calculate mullion door square foot material charges use 9" for the width, regardless of actual width, multiplied by the actual height, divided by 144. Multiply total square footage by the appropriate material charge found in the Material Pricing Guide. Add the material to the design charge of the desired door. Add appropriate lite charges indicated in the Mullion Design chart.
•ForTWandCRPdesigns,usetheCRPdesignchargeandcategoryBmaterialcharges.Forexample TW-20 and CRP-20 both use the CRP-20 design charge.
•AvailabilityofmiterandappliedmouldingmulliondoorsislistedthroughouttheWoodDoors and Drawer Fronts section. Use published design charge plus material category.
•SeetheMDFsectionforMDFmullionpricinginstructions.
Retainer Moulding Options
• Non-groovedframingisavailable.Simply specify “No rout for retainer moulding" in the special instructions portion of the order form.
Regular bead shown
• Frameonlydoorscomestandard with glass retainer moulding groove.
Frame Only products
Most Conestoga door styles are available with a frame only option to match your solid panel door designs. Frame only doors are a perfect accent and can accommodate a wide array of decorative glass and wire mesh inserts.
Pricing
To calculate frame only door square foot material charges use 9" for the width, regardless of actual width, multiplied by the actual height, divided by 144. Multiply total square footage by the appropriate material charge found in the Material Pricing Guide. Add the material charge to the design charge of the desired door style.
•ForTWandCRPdesigns,usetheCRPdesignchargeandcategoryBmaterialcharges.Forexample TW-20 and CRP-20 both use the CRP-20 design charge.
•Frameonlyproductsexceeding50"inwidthorheightreceivea$50upchargeformanualsanding and special handling.
•SeetheMDFsectionforMDFframeonlypricinginstructions.
#52, for varying glass thickness. Use on radius doors.
Use #83 (similar to #52) on TW-10916, 209seriesandBarcelona.
Glass Moulding specify moulding number
Clear (standard) for 1/8" glass only
#906, for 1/8" glass only
#907, for 1/4" glass
5.4
De
sig
n O
pt
iOn
sC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
Standard Lite Mullion
•Specify4-lite,6-lite,8-lite,10-liteor12-litewhenordering.•Allliteswillbeevenlyspacedunlessotherwiserequested.Oddmullion
configuration charges will apply if custom spacing is requested.•Allstandard3/4"and1"framingbeadsavailable.•MullionprofilesavailableinRegular,OgeeandSquare.Eliteframebead
receives Regular mullion profile.•Minimumsize–7-7/8"x7-7/8".•Clearplasticretainermouldingstandardunlessotherwisespecified.Wood
retainer moulding or no retainer moulding options available.•Truedividedliteoptionavailable.Upchargeapplies.
Mullion Doors (continued)
Mullion Design OptionsDesign Price Design Notes
Glass Moulding specify moulding number
• Fittedforonepieceofglassperdoor.
• Fittedforonepieceofglassperdoor.• SpecialmullionsapplytoallMiterdesigns
except CRP-10 Miter.
• Fittedforindividualpiecesofglass per lite.
• Thesedoorshave7/8" wide mullions unless otherwise specified.
• Glassretainermouldingnotsupplied.
RegularandOgeebeadmullions $3.40/lite Square bead mullions 3.90/lite
Elite/Special (mullion bead differs from framing bead) 9.10/lite Oddmullionconfiguration 11.60/door Odd mullion configuration MDF doors will be priced by our Special Designs Department.
True Divided Lites RegularandOgeebeadmullions 8.25/lite Square bead mullions 8.75/lite Elite/Special 13.95/lite (mullion bead differs from framing bead) Oddmullionconfiguration 11.60/door
Mullion Width Details Retainer Moulding Options Framing Bead Mullion Width
Regular/Elite 5/8" wide for 3/4" thick doors 3/4" wide for 1" thick doors
Square 5/8"
Ogee 7/8"
MDF beads 3/4"
• Mulliondoorscomestandardwithglass retainer moulding grove.
• Non-groovedframingisavailable.Simply specify “No rout for retainer moulding” in the special instructions portion of the order form.
Regular bead shown
#52, for varying glass thickness. Use on radius doors.
Use #83 (similar to #52) on TW-10916, 209seriesandBarcelona.
Clear (standard) for 1/8" glass only
#906, for 1/8" glass only
#907, for 1/4" glass
5.5
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
9-Lite Offset Mullion
•9-liteoffsetmullionfeatures2"x2"cornerlitesstandard.•Allstandard3/4"and1"framingbeadsavailable.•MullionprofilesavailableinRegular,OgeeandSquare.Eliteframebead
receives Regular mullion profile.•Minimumsize–11-7/8"x11-7/8".•Clearplasticretainermouldingstandardunlessotherwisespecified.Wood
retainer moulding or no retainer moulding options available.•Oddmullionconfigurationupchargeapplies.•Truedividedliteoptionavailable.Upchargeapplies.
11-Lite Offset Mullion
•11-liteoffsetmullionfeatures2"x2"cornerlitesstandard.•Allstandard3/4"and1"framingbeadsavailable.•MullionprofilesavailableinRegular,OgeeandSquare.Eliteframebead
receives Regular mullion profile.•Minimumsize–11-7/8"x14-5/8".•Clearplasticretainermouldingstandardunlessotherwisespecified.Wood
retainer moulding or no retainer moulding options available.•Oddmullionconfigurationupchargeapplies.•Truedividedliteoptionavailable.Upchargeapplies.
Odyssey Mullion
•Asixlitedesignwithtwomullionstripsextendingbelowhorizontalmullion.•AdimensionedsketchmustaccompanyeachOdysseymullionorder.•Allstandard3/4"and1"framingbeadsavailable.•MullionprofileavailableinRegular,OgeeandSquare.Eliteframebead
receives Regular mullion profile. •Minimumsize–14-7/8"x11-3/8".•Clearplasticretainermouldingstandardunlessotherwisespecified.Wood
retainer moulding or no retainer moulding options available.•Oddmullionconfigurationupchargesapply.•Truedividedliteoptionavailable.Upchargeapplies.
Mullion Doors (continued)
5.6
De
sig
n O
pt
iOn
sC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
Mullion Doors (continued)
Diamond & Double Diamond Mullion
•Featuresa4"x4"diamondlitecenteredleftandrightinopeningand4-1/2"from top rail. Double Diamond mullion features two 4"x 4" Diamond lites centered left and right in opening and 4-1/2" from top and bottom rails.
•Allstandard3/4"and1"framingbeadsavailable.•MullionprofilesavailableinRegular,OgeeandSquare.Eliteframebead
receives regular mullion profile.•MinimumsizeonDiamondmullion–12-5/8"x18-5/8"andminimumsize
onDoubleDiamondmullion–12-5/8"x25-1/4".•Clearplasticretainermouldingstandardunlessotherwisespecified.Wood
retainer moulding or no retainer moulding options available.•DiamondmullionswillbequotedthroughSpecialDesigns.Additional
lead-time required.
Arched Lite Mullion
•Archedlitemullionsfeaturesevenradiuslites.•3/4"and1"Regular,SquareandOgeeframingbeadsavailable.Ogeeframing
bead may burnish when coped.•MullionprofilesavailableinRegularandSquareonly.•Minimumsize–11-5/8"x9-5/8".•Clearplasticretainermouldingstandardunlessotherwisespecified.Wood
retainer moulding or no retainer moulding options available.•ArchedLitemullionwillbequotedthroughSpecialDesigns.Additional
lead-time required.•AnAutoCADdrawingwillbefaxedtocustomerforapprovalpriorto
manufacturing process beginning.
Double Arched Lite Mullion
•Doublearchedlitemullionsfeature12radiuslites.•3/4"and1"Regular,SquareandOgeeframingbeadsavailable.Ogeeframing
bead may burnish when coped.•MullionprofilesavailableinRegularandSquareonly.•Minimumsize–11-5/8"x14-15/16".•Clearplasticretainermouldingunlessotherwisespecified.Woodretainer
moulding or no retainer moulding options available.•DoubleArchedmullionsquotedthroughSpecialDesigns.Additionallead-time
required.•AnAutoCADdrawingwillbefaxedtocustomerforapprovalpriorto
manufacturing.
5.7
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
Mullion Doors (continued)
X-lite Mullion
•Featuresdiagonalmullionpattern.•Allstandard3/4"and1"framingbeadsavailable.•MullionprofilesavailableinRegular,OgeeandSquare.Eliteframebead
receives Regular mullion profile.•Minimumsize–8-5/8"x8-5/8".•Clearplasticretainermouldingstandardunlessotherwisespecified.Wood
retainer moulding or no retainer moulding options available.•X-litemullionsquotedthroughSpecialDesigns.Additionallead-timerequired.•AnAutoCADdrawingwillbefaxedtocustomerforapprovalpriorto
manufacturing.
Wainscot Panels
WainscotpanelscanbeorderedtomatchmostdoorstylesthatConestogaoffers.Eachwainscotpaneliscustommadetomeetyourexactsize,panelandframingspecifications.
Wainscot panels are typically constructed with multiple panels and/or wide bottom rails. A wainscot product is defined as any door or panel that exceeds 36" wide and 36" high, where the length or width exceeds 84", or that contains any framing (stile or rail) greater than or equal to 6" in width.
•Whenorderingwainscotproducts,specifyallrailandstileswidths,includingcenterframingpieces. Framing width of the wainscot panel will match the standard framing width of the door design requested unless otherwise noted by customer.
•Dimensionedsketchesarepreferredwitheachordertoensurecorrectorderentry.•ContactSpecialDesignsifwainscotpanelsareover119"inwidthorheight,orforwainscot
products that require more than five panels.•Alder,BambooandWalnutcannotbeorderedover95-3/4"inlengthduetolumber
availability.•Stilesorrailsover2-5/16"inwidthmayutilizeframingmaterialcontainingoneormore
glue joints. Number of glue joints is dependent on the overall width and length of the framing in question. See 5.12 in this section for framing width glue joint guide lines.
•Finishedwainscotpanelswillhaveonlythefaceandallexterioredgesstainedandtopcoated. The back of the panel will receive only a clear coat of sealer unless “Finished Back”optionisrequested.SeetheSolidWoodFinishProgramforpricingofFinishedBackoption.
Pricing
•Wainscotpanelpricingiscalculatedusingthedoordesignchargemultipliedbythenumberof panels specified, then added together with the material charge.
• Ifawainscotpanelexceeds50"inwidthand50"inheight,a$110upchargewillbeincurred due to the manual sanding and special handling.
•Wainscotpanelswithstilesorrails8-13/16"to15"willautomaticallyreceiveamulliontypespline as structural reinforcement. The spline charge is $34.65 per stile.
•Wainscotpanelswillreceiveanadditionnetchargeof$24.95foroversizepackagingifthepanel exceeds 36" in width and 36" in height, or if any dimension exceeds 84".
5.8
De
sig
n O
pt
iOn
sC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
Appliance Panel Options
Appliance panel selection must be noted when ordering. See offering and availability pages in the Wood Doors and Drawer Fronts section for appliance panel options and specific designs.
Apply over plywood and glue in strips options will have the following margins unless otherwise specified:•Refrigeratorpanel–1/2"marginonallsides.•Otherappliancepanels–1-1/2"bottommarginand1/2"onallsides.•Marginsupto3"availablewithglueinstripoption.• Ifnon-standardmarginsaredesired,dimensioneddrawingsmustbesubmitted.•Conestogausesancompositecoreplywoodasabackerforitssolidwoodappliancepanels.
For apply over plywood and glue in strips methods:•Listoverallsizeofpanelwhenordering.Specifyrequiredreveal/margin.Refertothe
appliance manufacturer’s specifications for this information.•Toseeifthechosendoordesigncanbemanufacturedasanappliancepanel,refertothe
OfferingandAvailabilitypagesintheWoodDoorsandDrawerFrontssection.Appliance panels are used on the main surface area of the appliance. For example, the door of a dishwasher would receive an appliance panel.
Glue in strips
•5sq.ft.orunder–add$14.50listtodesigncharge.•Over5sq.ft.–add$22.00listtodesigncharge.
Apply over plywood
•5sq.ft.orunder–add$18.50listtodesigncharge.•Over5sq.ft.–add$36.50listtodesigncharge.•Multipledoorsononepanel;$8.60perextradoor.
Insert Panel
• Insertpanelsareusedinsmaller,complementaryareasofthe appliance, such as over access panels of a refrigerator or dishwasher.
•Forusewithglueinstripandapplyoverplywoodoptions.
• Insertprofileswillmatchpanelraisedoors.•$8.00designcharge,MaterialCategoryB.
Putty Pin Holes
•$.50perdoor•Noadditionallead-timerequired.
5.9
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
5/16" Square and Diamond Pegs
•$1.05persquarepeg,$1.25perdiamondpeg•Forregular,ogeeandsquareframingbeads,pegswillbecenteredon
stile one half of the total width of the stile and in from exterior edge one half of the total width of the rail.
•Foreliteframingbead,mustsubmitsketch.•Pegwillbesandedflushwithfaceofframing.•Availableinallpublishedspecies.•Add1daytolead-time.
5/16" Diagonal Pegs
•$1.05perpeg•Seedrawingforpegplacementfordoorswith2-5/16"framing.•Fordoorsutilizingframingotherthan2-5/16"-centeroftheouter
peg will be mounted diagonally 1/3 the distance from the exterior corner. The center of the lower peg will be mounted diagonally 2/3 the distance from the exterior corner.
•Foreliteframingbead,mustsubmitsketch.•Multi-paneldoorswillreceiveonlyonepegateachinteriorjoint.•Availableinallpublishedspecies.•Add1daytolead-time.
5/16" Pyramid Pegs
•$1.90perpeg•Pyramidpegswillshiplooseanddoorswillbedrilledtoacceptpegs.•Pyramidpegswillbecenteredonstilesonehalfofthetotalwidthof
holes for stile and in from exterior edge one half of the total width of the rail.
•Fortwopegspercorner,orderasdiagonalpyramidpegs.•Multi-paneldoorswillbedrilledforonepegateachinteriorjointif
requested.•Availableinallpublishedspecies.•Add1daytolead-time.
Radius Corners
•$2.60perdoor•Specify1/8",1/4",1/2"or1"radius.•AvailablewithB-2,C-2,H-2,L-059,L-149,L-281,L-772,LC-2,
MachineEdge,PRS-2andV-2edgeprofilesonly.•Add1daytolead-time.
1-9/16"
1-9/16"
15/16"
15/16"
Options
Peg placement for doors with 2-5/16" framing
5.10
De
sig
n O
pt
iOn
sC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
3/4" or 1-1/2" spacing
1/2" spacing
G-012 Panel Groove
•$8.00perpanel•1-1/2"spacingfromcenterofgroovetocenterofgroove
standard. Groove pattern begins from center of panel.•Customspacingavailable.•Add1daytolead-time.
G-056 Panel Groove
•$8.00perpanel•1-1/2"spacingfromcenterofgroovetocenterofgroove
standard. Groove pattern begins from center of panel.•Customspacingavailable.•Add1daytolead-time.
G-121 Panel Groove
•$8.00perpanel.•1-1/2"spacingfromcenterofgroovetocenterofgroove
standard. Groove pattern begins from center of panel.•Notavailablewith1/4"panels.•Customspacingavailable.•Add1daytolead-time.
G-015 Panel Groove
•$2.50perpanel•1/2",3/4"or1-1/2"spacing.•1/2"spacingbaseofgrooveisflat.•Add1daytolead-time.
Camelot Rout
•$4.00perdoor•Routsaremachinedonstilesandrails.Astileonlyoption
is available and must be specified when ordering.•Ondesignswithcathedraltoporbottomrails,routis
available on stiles only.•Cannotbeusedwithappliedmoulding,CRP-10751MT,
CRP-1389MT, Madison, miter designs or Presidential series.
•Add1daytolead-time.
Groove width: 1/4"Groove depth: 1/16"
Groove width: 3/8"Groove depth: 1/8"
Groove width: 1/4"Groove depth: 1/8"
Options (continued)
5.11
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
Distressing
•Level1–arandomdistributionofnicksandimpressions.$3.00 design charge, $.50 per square foot material charge.
•Level2–arandomdistributionofnicksandimpressions,simulatedwormholes,razorcutsandcutjoints.$4.50design charge, $.50 per square foot material charge.
•Level3–arandomdistributionofnicksandimpressions,simulated wormholes and powder beetle damage, rasp marks and cracks. $7.00 design charge, $.50 per square foot material charge.
•Add1daytolead-time.
Rendering represents example only. Distressingisarandomtreatment;appearance of distressing will vary from piece to piece. A physical sample should be purchased before placing an order.
Cross Grain Sanding
•Thecrossgrainsandingoptionisavailableonunfinisheddoorsanddrawerfronts.Seeradius options for radius pricing.
•Pleasenote,evenwithcrossgrainremoval,doorsarenotfinish-roomready.Toprepareforfinishing, we recommend a light hand sanding in addition to cross grain removal.
•Thisoptionisautomaticallyincludedatnochargeonprefinishedproducts.Pricesbelowareper panel for unfinished doors, wainscoting and appliance panels, and per piece for other unfinished products such as drawer fronts and valances.❖ Face, back and edge profile $2.00 ❖Edgeprofileonly$1.50❖ Face and edge profile only $1.75 ❖ Face only $.75❖ Face and back only $1.50
•Noadditionallead-timerequired.
Antiquing
•$4.00designcharge,$1.00persquarefootmaterialcharge.•Antiquingisarandompost-stainsandingofexposedcornersandedges.Providesa
complementary worn look to our distressing.•Toachieveaheavierlevelantiquing,combinethisoptionwiththewearsandingoptionalso
found in this section.•Noadditionallead-timerequired.
Options (continued)
Wear Sanding
• $4.50perpanel.•Thewearsandingoptionprovidesanagedappearance
tounfinisheddoorsanddrawerfronts.Onraisedpaneldesigns, sanding is applied to the corners of the panel and the outside corners of the framing. Flat panel, mullions and frame only designs will receive sanding on the outside corners of the frame. Sanding will be random and each corner will vary in appearance. Wear sanding is available with all published panel raises and edge profiles.
•Noadditionallead-timerequired.
5.12
De
sig
n O
pt
iOn
sC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
Bottomedgeview
1-1/4" to std. width $1.00 std. width to 6-7/16"
6-1/2" to 8-3/4" 6.00
*8-13/16" to 14-15/16" 40.00
*15" and over Quote from Special Designs
*Stiles 8-13/16" to 15" wide automatically receive a mullion-type spline as a structural reinforcement. Charge for spline is $34.65 per stile.
Non-standard Width Framing - 1-1/4" minimum size Only available on mortise and tenon constructed doors
Width Cost per stile and rail
Add 4 days to lead-time.
Std. width to 6-7/16" $11.15
6-1/2" to 8-3/4" 26.00
8-13/16" to 14-15/16" 60.00
15" and over Quote through Special Designs
Additional charges for wider framing on CRP-1075MT, CRP-1389MT, Madison and Presidential
Framing Width Cost per stile and rail
Non-standard Width Framing
Front viewBack Routed Hand Pull
•$1.40perdoor.•Specifylocation:toporbottomandleft,rightorcentered.•Routis3-5/8"wideand3/8"deep.Whenspecifyingleftor
right hand, pull will start 3" in from edge of door. Hand pull is centered on doors less than 10" wide.
•AvailablewithallpublishededgeprofileswithoutRabbetexceptE-2,FP,L-253,L-304,L-686andL-947.
•Add1daytolead-time.
Face Routed Hand Pull
•$1.40perdoor.•Specifylocation:toporbottomandleft,rightorcentered.•Routis4-1/2"wideand1/2"deep.Whenspecifyingleft
or right, hand pull will start 3" in from edge of door. Hand pull is centered on doors less than 10" wide.
•AvailablewithallpublishededgeprofileswithoutRabbetexceptE-2,FP,J-2,L-253,L-297,L-304,L-686,L-947and LC-Inset.
•Add1daytolead-time.
Bottomedgeview
Front view
Options (continued)
2-3/8" to 4" width 1 glue joint is acceptable
4" to 6" width 2 glue joints are acceptable
over 6" in width 2 or more glue joints are acceptable
Glued up framing may be used on wide framed product. The chart below lists the number of glue joints that will be considered acceptable.
Framing Glue Joint Parameters Finish Width of Framing Number of Glue Joints Acceptable
3-5/8"
4-1/2"
No additional lead-time required.
5.13
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
3" std
2.5mm
45mm
9.5mm20mm
9"
center of door
Options (continued)
2.5mm
20mm
3" std
With insert holes
Without insert holes
Cut Down (Width or Height)
•$4.00perdoor.•Thecutdownoptionisavailableonmortiseandtenon
doors and drawer fronts that are manufactured to the minimumsizeandcutdowntoachieveasmallersize.Thisoption is not available for mitered designs.
•Noadditionallead-timerequired.
Soss Hinge Boring
•$3.50perdoor.•Theroutsareplaced9"offcenter,measuredfromthe
vertical center of the door to the start of the rout.•Notavailableondoorsover42"highorunder25-1/8"
high.•Add1daytolead-time.
Concealed Hinge Boring: Pattern “A” 2.5mm
•$2.00perdoor.•Boringconsistsofa35mmdiameterhole,13.5mmdeep
with a 2.5mm tab dimension from the edge of the door• Insertholesare8mmindiameter,11.9mmdeep,located
9.5mm from the center of the 35mm bore to the center of the 8mm insert bore.
•Specifywithorwithoutinsertholes.•Doors9"-42"longreceivetwobores.•Doors42-1/16"-72"receivethreebores.•Doors72-1/16"andlongerreceivefourboreswithcenter
holes set 25" in from each end.•Boringavailableonthefollowingedgeprofilesonly:B-2,
CFP-2, L-034, L-059, L-149, L-281, L-297, L-803, LC-2,LC-Inset,MachineEdge,PRS-2andV-2.Notavailable with rabbeted or partial inset edge profiles.
•Pattern“A”accommodatesthefollowinghingemodels: Blum:Compact33,38C,38Nand39Cseries Grass: Tech, 300 and 3000 Series Amerock: CM2042 Mepla: ACC162 (screw-in version) Salice: “S” Series Hettich:TBandOptimatTBSeries
•Customboringlocationsavailable-$2.20perdoor. Specify dimension from top or bottom edge of door to center of cup locations.
•Add1daytolead-time.
5.14
De
sig
n O
pt
iOn
sC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
Concealed Hinge Boring: Pattern “B” 5mm
•$2.00perdoor.•Boringconsistsofa35mmdiameterhole,13.5mmdeep
with a 5mm tab dimension from the edge of the door.• Insertholesare8mmindiameter,11.9mmdeep,located
9.5mm from the center of the 35mm bore to the center of the 8mm insert bore.
•Specifywithorwithoutinsertholes.•Doors9"–42"longreceivetwobores.•Doors42-1/16"–72"receivethreebores.•Doors72-1/16"andlongerreceivefourboreswithcenter
holes set 25" in from each end.•Boringavailableonthefollowingedgeprofilesonly:B-2,
CFP-2, L-034, L-059, L-149, L-281, L-297, L-803, LC-2, LC-Inset,MachineEdge,PRS-2andV-2.Notavailablewith rabbeted or partial inset edge profiles.
•Pattern“B”accommodatesthefollowinghingemodels: Blum:107,120,120+,170,Diagonal20,30,37,45, Angle 25 and Clip Top Series Grass: Tech, 300 and 3000 Series Salice: 200 Series (use 2mm mounting plate)
•Customboringlocationsavailable-$2.20perdoor. Specify dimension from top or bottom edge of door to center of cup locations.
•Add1daytolead-time.
Knife Hinge Slot
•$1.50perdoor.• Knifehingeslotis9/32"wide,37/64"deepand1-3/4"long.
Placement is 3" from edge of door to the center of slot.•Doors9"–35-15/16"receive2slots.•Doors36"–51-15/16"receive3slotswithonecentered.•Doors52"andgreaterreceive4slotswithcenterslotsset
25" in from each end.•Knifehingeslotwillaccommodatethefollowinghinges:
Youngdale: 5 and 6 hinge Amerock: 2603, 2605 and 2606 hinges
•Availablewiththefollowingedgeprofilesonly:B-2,C-2,CFP-2,E-2,H-2,J-2,L-034,L-120,L-149,L-281,L-297,L-772,L-803,LC-2,LC-Inset,MachineEdge,PRS-2andV-2.Notavailablewithrabbetededgeprofiles.
• Notavailableonframinglessthan2-5/16"inwidth.Cutdown framing option is not available.
•Notavailableinframeonlyormulliondesigns,doorsunder9"high,Battendoors,CRP-10605andCRP-10446.
•Add1daytolead-time.
Options (continued)
5mm
45mm
9.5mm22.5mm
3" std
3" std
5mm
22.5mm
With insert holes
Without insert holes
9/32"1-3/4"
3"
5.15
De
sig
n O
pt
iOn
sC
ustom
Pro
ducts
Spring 2008 Conestoga Wood Specialties Corporation
•AvailableinstandardgradeCherryandHardMaple.•Availableonthefollowing3/4"thickdesignsusing
2-5/16" wide framing: Cornwall, Cotswald, CRP-10, CRP-10334, CRP-10382, CRP-10533, CRP-10751, CRP-10751MT, CRP-10827,CRP-10 Miter, CRP-1389, CRP-1389MT, Monarch Square, Newbury and Saxony.
•AllotherdesignsandframingwidthsmustquotedthroughSpecial Designs.
•Dependingondoorsize,therevealfromtheoutsideedgeof carving to inside edge of the framing bead will fall between 1/2" to 2".
•Add2daystolead-time(noexpedites).•Tocalculatematerialchargeswhencarvedpaneloption
is ordered use 9" for width, regardless of actual width, multiplied by the actual height and divide by 144. Multiply total square footage by the appropriate material charge found in the Material Pricing Guide. Add the material charge to the design charge to one of the available door styles.
•Loosepanelsalsoavailable.Seesection12forpricingandavailability.
To determine the list price:
15" x 28" CRP-10 with carved acanthus panel option in Cherry.Designcharge=($11.25+$195)=$206.25Material charge = ((9" x 28")/144) x $15.95) = $27.91Totalcost=($206.25+$27.91)=$234.16 ThefollowingPanelSizesareavailablewiththe MinimumandMaximumdoorsizeforeach.
Pricing Min. Door Size Max. Door Size Cherry Hard Maple
13" x 28" 16" x 31" $195.00 $180.00
13" x 34" 16" x 37" 215.00 200.00
13" x 40" 16" x 43" 235.00 215.00
16" x 28" 19" x 31" 215.00 200.00
16" x 34" 19" x 37" 240.00 220.00
16" x 40" 19" x 43" 265.00 235.00
19" x 28" 22" x 31" 235.00 215.00
19" x 34" 22" x 37" 265.00 240.00
19" x 40" 22" x 43" 290.00 260.00
22" x 28" 25" x 31" 260.00 235.00
22" x 34" 25" x 37" 290.00 260.00
22" x 40" 25" x 43" 320.00 280.00
Carved Acanthus Panel Option
5.16
sO
liD
wO
OD
fin
ish
ing
pr
Og
ra
mC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Spring 2008
Enkeboll Designs® Panel Option
EnkebollDesigns’® carved panels can now be purchased wrapped with Conestoga door or drawer front framing. Enkeboll’spanelsareavailableinvarioussizesandcarveddesigns,butcannotbetrimmedinheightorwidth.Becausethepaneldimensionscannotbealtered,theoverallsizeofyourassembleddoorisdependentonpanelsizechosencombined with the framing width of the Conestoga door design.
•EnkebollpanelsmaybeinsertedintonearlyanystyleofConestoga door or drawer front framing.
•AvailablespeciesincludeAlder,Cherry,HardMaple,RedOak,WalnutandWhiteOak.
•Slightmismatchesincolormayoccurbetweenpanelsandframing and will not be considered defective.
•EachEnkebollcarvedpaneldoorwillbequotedthroughSpecialDesigns;simplyselecttheEnkebollpartnumberand specie of the panel along with style of door or drawer frontframingtobeutilized.Wideframingandcutdownoptions are available on most mortis & tenon door designs.
•ThefinishingoptionisavailablewithallEnkebollDesignspaneldoorsincludingstains,Colourtonesandglazing.
•Lead-timeswillvarydependingonpaneldesignandframing combination chosen.
top related