cv-6 › wp-content › ... · atc 40 tools as option 13 14 6shfl¿fdwlrq 0rgho &90 &9...

Version : March, 2014

CV-6

200kgs

CV-6Travel [ X,Y,Z ]:

Max. Load Capacity:

200kgs

1 2

(1) (3)(2)

(5)(4) (6) Direct-driven VMC-137+ / 1688 / 21100+

�B�T�-�3�0

�B�T�-�4�0�/�5�0

3 4

7 8

9 10

ATC 40 tools as option

11 12

ATC 40 tools as option

13 14

KAFO reserves the right to modify the specifications without further notice. KAFO reserves the right to modify the specifications without further notice.

15 16

MODEL CVM-6 CV-6

CVM-6A CV-6A

VMM-116A VMC-116A

VMM-116B VMC-116B

TravelX-axis mm 600 1100Y-axis mm 400 600Z-axis mm 400 635Guideway- X/Y/Z type Linear Guide Way Box WayDistance from spindle nose to table surface mm 200-600 100-735Distance from spindle center to the track surface of Z-axis mm 432 650TableTable Dimension mm 700x400 1250x600Max Loading kgs 200 1200T-Slots(Number*Width*Pitch) no x mm 3 X 14mm X 125mm 5 X 18mm X 125mmSpindleSpindle Speed ( ST ) rpm Belt Head 10000 Gear Head 6000

Spindle Speed ( OP ) rpm Direct-Driven 10000/12000/15000

Belt Head/Direct-Driven

8000/10000/12000-

Speed Change steps steps 1 2Spindle Taper type #30 #40 #50Spindle bearing bore diameter mm 50 70 75(*70 Belt Head) 85FeedRapid travel rate (X/Y/Z) m/min 48/48/48 24/24/20Cutting Rate m/min 10Manual JOG feed rate m/min 4 (20 steps)Tool Shank Type

Tool Shank Type type MAS BT-30 MAS BT-40 (*CAT-40/*DIN-40)

MAS BT-50 (*CAT-50/*DIN-50)

Pull-Stud type MAS BT-30/P30-T-1 MAS BT-40/P40-T-1 (*CAT-40/*DIN-40)

MAS BT-50/P50-T-1 (*CAT-50/*DIN-50)

Auto Tool Change System CVM/VMM Series do not support ATCMagazine Capacity ( ST ) tools 20 (Cam Type) 24 (Cam Type)Magazine Capacity ( OP ) tools - - *32/*40 (Cam Type) -Max.Tool Diameter mm 65 75 108Max.Tool Diameter (Without adjacent tool) mm 130 150 216Max.Tool Length mm 200 250 300Max.Tool Weight kgs 3 7 15Tool Change Time (CHIP TO CHIP) sec 1 1.2 2(*1.4) 2.8Tool Change Time (TOOL TO TOOL) sec 2.5 2.7 5.8 6MotorSpindle Motor output(cont./30min) kw 3.5/5.5 5.5/7.5 7.5/11 15/18.5Feed Motor X/Y/Z kw 1.6/1.6/3.0 3.0/3.0/3.0Coolant Motor kw 0.75Power SupplyPower Supply KVA 15 20Compressed Air Supply Mpa,l/min 0.6,500Coolant Tank Capacity L 200 420Controller FANUC / MITSUBISHI / SIEMENS / HEIDENHAINExternal DimensionWidth mm 1750 3830 3830Lenth mm 2490 2925 2925Height mm 2261 2516 2770 2770Net Weiht kgs 2800 3000 7500 7600Accuracy (following values wer tested in the temperature-controlled room)ISO 10791 Accuracy

Positioning mm 0.009 0.01 0.01Repeatability mm 0.006 0.01 0.01

JIS 6338 Accuracy

Positioning(within 300mm) mm ±0.004 ±0.005 ±0.005Repeatability(within 300mm) mm ±0.002 ±0.002 ±0.002

Packing for Export 20'STD 40'HQ