cwspe48002 su-17/22 engine bay doors set in 1/48 scale for

Su-17/22 Engine Bay Doors set in 1/48 scalefor all kits

CWSPE48002

Extra pressure valves for the bottom door of the model.

Inside fuselage framing

Structural framing of the doors

Doors

Pressure valves

1. Bent the PE parts to the curvature of the fuselage.

2. Use the doors as a template to mark and cut the accessopenings in the fuselage of the airplane. You might have touse and verify with drawings or pictures. From the inside you’ll have to thin down the plastic or resin and glue the inner framesinto their places. Not shown here.

3. Fold and glue the pressure valves.

4. Glue the inner structural framing to the doors.

5. Glue the pressure valves into their marked positions on theinner side of the doors.

6. Join the hinges to display the access doors open.

7. Use the extra pressure valves on the bottom side door onyour model.

Warning! This set is for experienced modelersand kit surgery is required.

Cold War Studio 2017

Right LeftRightLeft

Folded presure valves

Doors internal structure glued in place

Finished doors with the pressure valves glued in place.