data access network for monitoring and troubleshooting
Post on 23-Jan-2015
3.003 Views
Preview:
DESCRIPTION
TRANSCRIPT
LAN, WAN, SAN,and now
DANData Access Network
What’s a DAN?out-of-band passive monitoring network
Includes passive tools like: Security IDS Sensors,
Application Performance Monitors,
Troubleshooting Protocol Analyzers,
VoIP QoS Probes,
Forensic Recorders,
and Data Access Switching
Prop
rieta
ry &
Con
fiden
tial
Prop
rieta
ry &
Con
fiden
tial
3
DAN provides “Data Sockets”Part of a Flexible Network Infrastructure
• Plug-in multiple out-of-band tools – ANY data to ANY tool• Unobtrusive 24x7 tool connections – never touch the network• Aggregate, Replicate, Filter and load balance data streams• Use legacy 1Gig tools to monitor new 10Gig networks
Why are DANs Needed Now?Things Have Changed
Enron and 9/11 spawned SOX auditing, increased security
and lawful intercept requirement
PLUS technology and business developments:Web site e-commerce and internet applications demand support
VoIP and media convergence make the network more strategic
Green networking demands smaller Data Center footprint
Network is how business gets done. Downtime is unacceptable
Prop
rieta
ry &
Con
fiden
tial
New SOX compliance transaction monitors Keep your boss out of jail!
IDS Sensors detect external attacksFrom hackers
NAC appliance protects networks from insideFrom your own people!
CALEA lawful intercept and Forensic Recorders
Configuration monitoring tools watch over network resources
Application and Network troubleshooting
Prop
rieta
ry &
Con
fiden
tial
Proliferation of Tools
Prop
rieta
ry &
Con
fiden
tial
Proliferation Causes Contention for Span Ports
Security and IT Engineers seen
here “Negotiating” Over
a SPAN Port
Prop
rieta
ry &
Con
fiden
tial
An Analogy:
Using a DAN is like using a power strip.
Prop
rieta
ry &
Con
fiden
tial
Too Many Power Tools? Not Enough Sockets?
?
??
?
Prop
rieta
ry &
Con
fiden
tial
For Power Tools, use a Power Strip
Prop
rieta
ry &
Con
fiden
tial
Too Many Monitoring Tools? Not Enough Span Ports?
?
?
?
?
Prop
rieta
ry &
Con
fiden
tial
For Sensors/Monitors/Analyzers,Use a DAN Switch
One Span port serves Many tools
What Other Problems do DANssolve?
Distributed Monitoring burning the budget?Consolidate tools; $ave money on capital and operational budgets
Unsecure monitor or tap ports risk data leakage?DAN can secure all access point to prevent snooping
Too much traffic for one tool? Reduce and balance load over multiple units to match tool capacity
Restrictive Configuration Management Policies?Deploy tools and make changes on your own schedule
Prop
rieta
ry &
Con
fiden
tial
Prop
rieta
ry &
Con
fiden
tial
Monitoring a Mesh Network?
Prop
rieta
ry &
Con
fiden
tial
Old Solution: Lots of Distributed Tools,Deploy one tool per span port/switch
Lots of hardware…very expensive!
Prop
rieta
ry &
Con
fiden
tial
Better: Distribute Connections with a DANConsolidate Tools; Save CapEx $$$
Aggregate and balance flows to Consolidated Tools
DAN is “Best Practice” for Network Infrastructure Design
Totally flexible solution to many problems
Facilitates unobtrusive instrumentation of a network
Solves requirement for multiple tool access
Gives tools the view of the total network
Secures monitor and tap ports
Improves monitor coverage, saves time and money.
Prop
rieta
ry &
Con
fiden
tial
DAN Solves Access Problems By
• Aggregating many links to any tool
• Multicasting any link to many tools
• Filtering data to map packets to tools
• Saving $$ Cap Ex and Op Ex budget$
Any to Any Any to ManyMany to Any Bit-Mask Filtering
Prop
rieta
ry &
Con
fiden
tial
top related