design and generation of high performance mr fluid brake

Project on-

Project by-Kundan R AvchareDivyanshu jainTarang bansal

Faculty adviser-Prof. R.K. Mandloi

Magnetorheological Fluidso sometimes referred to as ferrofluidso often made by mixing ferromagnetic particles

(iron, cobalt, etc) into a carrier fluid such as silicone oil or even water.

Magnetorheological Fluids– the ferromagnetic particles are forced into an

aligned arrangement when the fluid is placed in a magnetic field

Magnetorheological Fluids– The alignment of the particles in the fluid will

also cause the viscosity of the fluid to increase, making the fluid seem “thicker.”

Braking is considered to be one of the most important aspects in driving.

ABS is the most advance breaking system available at present.

ABS helps the driver stop quicker under wet or slippery conditions.

Allows the driver to brake and steer at the same time.

A very useful safety feature of car during emergency braking.

A : Wheel Speed SensorsB : ECUC : Pressure Release ValvesD : Brake Line to Caliper

High cost Complicated mechanisms Heavy system

Simple design. Less no. of components. More sensitive

Dampers Disc Brakes Drum Brakes