dynapac pl2000s: fresadora de elevada capacidade com …...dynapac pl2100s: fresadora de elevada...
Post on 14-Feb-2021
4 Views
Preview:
TRANSCRIPT
-
Dynapac PL1000Compact planers
Technical data
Cutting section
Working width 1,000 mm
Cutting depth 300 mm
Cutting drum diameter 930 mm
Spacing 15 mm
Number of tools 93
Working performance
Operating speed 0 -30 m/min
Travel speed 0 -6 km/h
Size, front rubber tires (mm) 650x250
Size, rear rubber tires (mm) 650x250
Tank capacities
Fuel tank 450 l
Hydraulic tank 110 l
Water tank 1,100 l
Electrical system
Heavy-duty cold start battery 2 x 12V 170Ah
Generator 24 V /100 A
Loading system
Belt width 400 mm
Maximum discharge height 4,600 mm
Masses
Transport mass 12.4 t
Operating mass (CE) 13.1 t
Max. operating mass, fully loaded (CE) 15 t
Engine
Manufacturer/Model Deutz TCD2012L06
Fuel Diesel
Number of cylinders 6
Rated power, SAE J1995 150 kW @ 2,200 rpm
Dynapac PL1000Compact planers
Technical data
Cutting section
Working width 1,000 mm
Cutting depth 300 mm
Cutting drum diameter 930 mm
Spacing 15 mm
Number of tools 93
Working performance
Operating speed 0 -30 m/min
Travel speed 0 -6 km/h
Size, front rubber tires (mm) 650x250
Size, rear rubber tires (mm) 650x250
Tank capacities
Fuel tank 450 l
Hydraulic tank 110 l
Water tank 1,100 l
Electrical system
Heavy-duty cold start battery 2 x 12V 170Ah
Generator 24 V /100 A
Loading system
Belt width 400 mm
Maximum discharge height 4,600 mm
Masses
Transport mass 12.4 t
Operating mass (CE) 13.1 t
Max. operating mass, fully loaded (CE) 15 t
Engine
Manufacturer/Model Deutz TCD2012L06
Fuel Diesel
Number of cylinders 6
Rated power, SAE J1995 150 kW @ 2,200 rpm
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl1000_en-20140331.111820.pdf 2014-03-31 11:18
http://www.atlascopco.com/us/Contactus/
-
Dynapac PL1000Compact planers
Technical data
Dimensions
A. Wheelbase 2,600 mm
B. Front to axle 815 mm
B1. Width, max. 2,265 mm
B2. Width, standard 1,880 mm
B3. Width, wheel track 1,100 mm
C1. Conveyor angle, left 25°
C2. Conveyor angle, right 25°
D. Rear to axle 1,190 mm
H1. Height, with canopy 3620 mm
H2. Height, with folded canopy 2,820 mm
H3. Height, w/o canopy 2,580 mm
H4. Height, with conveyor 3600 -4600 mm
H5. Height, with 1m conveyor 1,575 mm
K1. Width, max. 895 mm
K2. Width, standard 660 mm
L1. Length 4,600 mm
L2. Length, with folded conveyor 8,820 mm
L3. Length, with conveyor 10,400 -11,500 mm
L4. Length, with short conveyor 5,700 mm
R. Milling radius, min. 230 mm
α1. Steering angle, left 41°
α2. Steering angle, right 72°
Optional equipment
■ Conveyor, 1 m rigid ■ Conveyor, 5,5 m rigid ■ Conveyor, 5,5 m foldable ■ Conveyor, 7,5 m rigid ■ Conveyor, 7,5 m foldable ■ EASY Level system ■ Slope sensor (ELS) ■ Fine milling drum (spacing 7,5 mm)
Dynapac PL1000Compact planers
Technical data
Dimensions
A. Wheelbase 2,600 mm
B. Front to axle 815 mm
B1. Width, max. 2,265 mm
B2. Width, standard 1,880 mm
B3. Width, wheel track 1,100 mm
C1. Conveyor angle, left 25°
C2. Conveyor angle, right 25°
D. Rear to axle 1,190 mm
H1. Height, with canopy 3620 mm
H2. Height, with folded canopy 2,820 mm
H3. Height, w/o canopy 2,580 mm
H4. Height, with conveyor 3600 -4600 mm
H5. Height, with 1m conveyor 1,575 mm
K1. Width, max. 895 mm
K2. Width, standard 660 mm
L1. Length 4,600 mm
L2. Length, with folded conveyor 8,820 mm
L3. Length, with conveyor 10,400 -11,500 mm
L4. Length, with short conveyor 5,700 mm
R. Milling radius, min. 230 mm
α1. Steering angle, left 41°
α2. Steering angle, right 72°
Optional equipment
■ Conveyor, 1 m rigid ■ Conveyor, 5,5 m rigid ■ Conveyor, 5,5 m foldable ■ Conveyor, 7,5 m rigid ■ Conveyor, 7,5 m foldable ■ EASY Level system ■ Slope sensor (ELS) ■ Fine milling drum (spacing 7,5 mm)
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl1000_en-20140331.111820.pdf 2014-03-31 11:18
http://www.atlascopco.com/us/Contactus/
-
Dynapac PL2000High capacity planers
Technical data
Cutting section
Working width 2,010 mm
Cutting depth 320 mm
Cutting drum diameter 1,100 mm
Spacing 15 mm
Number of tools 162
Working performance
Operating speed 0-40 m/min
Travel speed 0-5 km/h
Theoretical turning radius 2,125 mm
4 heavy-duty tracks 1890x306x685 mm
Tank capacities
Fuel tank 1,100 l
Hydraulic tank 270 l
Water tank 3,700 l
Loading system
Belt width (collecting conveyor) 850 mm
Belt width (discharge conveyor) 800 mm
Theoretical swept volume 470 m3/h
Masses
Transport mass 28.2 t
Operating mass (CE) 30.7 t
Max. operating mass, fully loaded (CE) 33.4 t
Engine
Manufacturer/Model Cummins QSX 15
Fuel Diesel
Cooling Water
Number of cylinders 6
Rated power, SAE J1995 447 kW (600 hp ) @ 2,100 rpm
Dynapac PL2000High capacity planers
Technical data
Cutting section
Working width 2,010 mm
Cutting depth 320 mm
Cutting drum diameter 1,100 mm
Spacing 15 mm
Number of tools 162
Working performance
Operating speed 0-40 m/min
Travel speed 0-5 km/h
Theoretical turning radius 2,125 mm
4 heavy-duty tracks 1890x306x685 mm
Tank capacities
Fuel tank 1,100 l
Hydraulic tank 270 l
Water tank 3,700 l
Loading system
Belt width (collecting conveyor) 850 mm
Belt width (discharge conveyor) 800 mm
Theoretical swept volume 470 m3/h
Masses
Transport mass 28.2 t
Operating mass (CE) 30.7 t
Max. operating mass, fully loaded (CE) 33.4 t
Engine
Manufacturer/Model Cummins QSX 15
Fuel Diesel
Cooling Water
Number of cylinders 6
Rated power, SAE J1995 447 kW (600 hp ) @ 2,100 rpm
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl2000_en-20150804.174318.pdf 2015-08-04 17:43
http://www.atlascopco.com/us/Contactus/
-
Dynapac PL2000High capacity planers
Technical data
Dynapac PL2000High capacity planers
Technical data
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl2000_en-20150804.174318.pdf 2015-08-04 17:43
http://www.atlascopco.com/us/Contactus/
-
Dynapac PL350Compact planers
Technical data
Cutting section
Working width 350 mm
Cutting depth 100 mm
Cutting drum diameter 520 mm
Spacing 12 mm
Number of tools 38
Working performance
Operating speed 0-25 m/min
Travel speed 0-5.8 km/h
Tank capacities
Fuel tank 125 l
Hydraulic tank 110 l
Water tank 400 l
Electrical system
Heavy-duty cold start battery 2 x 12V
Generator 12 V /35 A
Loading system
Belt width 250 mm
Maximum discharge height 750 mm
Masses
Transport mass 3.4 t
Operating mass (CE) 3.7 t
Ballast mass 1.1 t
Conveyor with scraper (standard) 0.1 t
Max. operating mass (incl. ballast) 4.6 t
Max. operating mass, fully loaded (CE) 4.9 t
Engine
Manufacturer/Model Cummins B 3.3
Fuel Diesel
Cooling Water
Number of cylinders 4
Rated power, SAE J1995 45 kW @ 2,200 rpm
Dynapac PL350Compact planers
Technical data
Cutting section
Working width 350 mm
Cutting depth 100 mm
Cutting drum diameter 520 mm
Spacing 12 mm
Number of tools 38
Working performance
Operating speed 0-25 m/min
Travel speed 0-5.8 km/h
Tank capacities
Fuel tank 125 l
Hydraulic tank 110 l
Water tank 400 l
Electrical system
Heavy-duty cold start battery 2 x 12V
Generator 12 V /35 A
Loading system
Belt width 250 mm
Maximum discharge height 750 mm
Masses
Transport mass 3.4 t
Operating mass (CE) 3.7 t
Ballast mass 1.1 t
Conveyor with scraper (standard) 0.1 t
Max. operating mass (incl. ballast) 4.6 t
Max. operating mass, fully loaded (CE) 4.9 t
Engine
Manufacturer/Model Cummins B 3.3
Fuel Diesel
Cooling Water
Number of cylinders 4
Rated power, SAE J1995 45 kW @ 2,200 rpm
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl350_en-20141210.084418.pdf 2014-12-10 08:44
http://www.atlascopco.com/us/Contactus/
-
Dynapac PL350Compact planers
Technical data
Dimensions
A. Wheelbase 1,570 mm
B. Front to axle 620 mm
B1. Width, max. 1,310 mm
B2. Width, standard 1,010 mm
B3. Width, wheel track 1,030 mm
B4. Width 740 mm
B5. Width 290 mm
B6. Width 410 mm
C1. Conveyor angle, left 10°
C2. Conveyor angle, right 10°
D. Rear to axle 300 mm
H1. Height, max. 2,010 mm
H2. Height, max. 750 mm
H3. Height 685 mm
K. Ground clearance 305 mm
L1. Length 2,955 mm
L2. Length, with folded conveyor 3,065 mm
L3. Length, with conveyor 3,800 mm
R. Milling radius, min. 100 mm
V. 26°
α1. Steering angle, left 75°
α2. Steering angle, right 75°
Optional equipment
■ Fine milling drum (spacing 6 mm)
Dynapac PL350Compact planers
Technical data
Dimensions
A. Wheelbase 1,570 mm
B. Front to axle 620 mm
B1. Width, max. 1,310 mm
B2. Width, standard 1,010 mm
B3. Width, wheel track 1,030 mm
B4. Width 740 mm
B5. Width 290 mm
B6. Width 410 mm
C1. Conveyor angle, left 10°
C2. Conveyor angle, right 10°
D. Rear to axle 300 mm
H1. Height, max. 2,010 mm
H2. Height, max. 750 mm
H3. Height 685 mm
K. Ground clearance 305 mm
L1. Length 2,955 mm
L2. Length, with folded conveyor 3,065 mm
L3. Length, with conveyor 3,800 mm
R. Milling radius, min. 100 mm
V. 26°
α1. Steering angle, left 75°
α2. Steering angle, right 75°
Optional equipment
■ Fine milling drum (spacing 6 mm)
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl350_en-20141210.084418.pdf 2014-12-10 08:44
http://www.atlascopco.com/us/Contactus/
-
Dynapac PL500Compact planers
Technical data
Cutting section
Working width 500 mm
Cutting depth 200 mm
Cutting drum diameter 700 mm
Spacing 15 mm
Number of tools 61
Working performance
Operating speed 0-24
Travel speed 0-5.3
Size, front rubber tires (mm) 560x250
Size, rear rubber tires (mm) 560x250
Tank capacities
Fuel tank 250 l
Hydraulic tank 140 l
Water tank 500 l
Electrical system
Heavy-duty cold start battery 2x 12V, 74Ah
Generator 24V /70A
Loading system
Belt width 400 mm
Maximum discharge height 3,850 mm
Masses
Transport mass 7.20 t
Operating mass (CE) 7.50 t
Max. operating mass, fully loaded (CE) 7.80 t
Engine
Manufacturer/Model Cummins QSB4.5-C130
Fuel Diesel
Cooling Water
Rated power, SAE J1995 97 kW @ 2,200 rpm
Dynapac PL500Compact planers
Technical data
Cutting section
Working width 500 mm
Cutting depth 200 mm
Cutting drum diameter 700 mm
Spacing 15 mm
Number of tools 61
Working performance
Operating speed 0-24
Travel speed 0-5.3
Size, front rubber tires (mm) 560x250
Size, rear rubber tires (mm) 560x250
Tank capacities
Fuel tank 250 l
Hydraulic tank 140 l
Water tank 500 l
Electrical system
Heavy-duty cold start battery 2x 12V, 74Ah
Generator 24V /70A
Loading system
Belt width 400 mm
Maximum discharge height 3,850 mm
Masses
Transport mass 7.20 t
Operating mass (CE) 7.50 t
Max. operating mass, fully loaded (CE) 7.80 t
Engine
Manufacturer/Model Cummins QSB4.5-C130
Fuel Diesel
Cooling Water
Rated power, SAE J1995 97 kW @ 2,200 rpm
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl500_en-20140114.090558.pdf 2014-01-14 09:05
http://www.atlascopco.com/us/Contactus/
-
Dynapac PL500Compact planers
Technical data
Dimensions Table
A1 4,888 -5,077 mm
A2 8,200 -9,300 mm
B 3,730 mm
C 1,970 mm
D 1,000 mm
E 740 mm
F 2,350 mm
G 2,500 mm
H 3,400 mm
I1 1,140 mm
I2 1,500 -4,220 mm
J 1,650 mm
K 1,200 mm
L 860 mm
M1 68° /73° /70°
M2 29° /50° /50°
N 850 mm
O 1,250 mm
P 780 mm
S1 25°
S2 20°
T 955 mm
U 388 mm
V 30°
Dynapac PL500Compact planers
Technical data
Dimensions Table
A1 4,888 -5,077 mm
A2 8,200 -9,300 mm
B 3,730 mm
C 1,970 mm
D 1,000 mm
E 740 mm
F 2,350 mm
G 2,500 mm
H 3,400 mm
I1 1,140 mm
I2 1,500 -4,220 mm
J 1,650 mm
K 1,200 mm
L 860 mm
M1 68° /73° /70°
M2 29° /50° /50°
N 850 mm
O 1,250 mm
P 780 mm
S1 25°
S2 20°
T 955 mm
U 388 mm
V 30°
Find us locally at www.atlascopco.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
rce_pl500_en-20140114.090558.pdf 2014-01-14 09:06
http://www.atlascopco.com/us/Contactus/
-
Criar documento PDF
Solicitar informação
Centro de Suporte a Clientes -Construção e MinasEnviar uma mensagem de correioelectrónico
Informações sobre oproduto
Unidades: Métrico Imperial
Dynapac PL2000S: Fresadora de elevada capacidade com uma largura de fresagem de2000 mm
A Dynapac PL2000S é uma fresadora a frio compacta, poderosa, de accionamento hidráulico, elevada capacidade e com direcção a quatro rastos, sistema decarregamento dianteiro e tambor de corte accionado mecanicamente por correias. A Dynapac PL2000LS foi desenvolvida para a remoção e perfilamentocompletos de pavimentos de asfalto e betão em locais de trabalho de grande dimensão.
Características e vantagens
Dados técnicos
Especificações técnicas
Tipo de modelo High capacity
Accionamento do motor Belt driven drum
Massa de transporte 31000 kg
Massa operacional 33500 kg
Largura de corte máx. 2010 mm
Profundidade de corte máx. 320 mm
Velocidade de funcionamento máx. 0 - 40 m
Velocidade de transporte máx. 0 - 5 km/h
Número de bits 162
Motor
Marca/modelo do motor Cummins QSX 15
Potência nominal 447 kW (600 hp) at 2100 rpm
Sistema hidráulico
Fresagem Belt driven
Direcção Hydrostatic
Travão de serviço Hydrostatic in forward and reverse lever
Travão de estacionamento/emergência Failsafe multidisc brake in planetary gears
Portugal atlascopco.com
LIGAÇÕES RÁPIDAS
Loja de publicações Atlas Copco
Galeria de fotos Atlas Copco
Compacta
Boa capacidade de manobra
Raio de viragem reduzido
Potente
Função de activação e desactivação automática, sistema de água
Função de activação e desactivação automática, sistema de transporte
Níveis de ruído e consumo de combustível reduzidos
-
Capacidades
Capacidade do depósito de combustível 1100 l
Depósito hidráulico 300 l
Capacidade do depósito de água 3700 l
-
Criar documento PDF
Solicitar informação
Centro de Suporte a Clientes -Construção e MinasEnviar uma mensagem de correioelectrónico
Informações sobre oproduto
Unidades: Métrico Imperial
Dynapac PL2100S: Fresadora de elevada capacidade com uma largura de fresagem de2100 mm
A Dynapac PL2100S é uma fresadora a frio compacta, poderosa, de accionamento hidráulico, elevada capacidade e com direcção a quatro rastos, sistema decarregamento dianteiro e tambor de corte accionado mecanicamente por correias. A Dynapac PL2100S foi desenvolvida para a remoção e perfilamentocompletos de pavimentos de asfalto e betão em locais de trabalho de grande dimensão.
Características e vantagens
Dados técnicos
Especificações técnicas
Tipo de modelo High capacity
Accionamento do motor Belt driven drum
Massa de transporte 31400 kg
Massa operacional 33900 kg
Largura de corte máx. 2100 mm
Profundidade de corte máx. 320 mm
Velocidade de funcionamento máx. 0 - 40 m
Velocidade de transporte máx. 0 - 5 km/h
Número de bits 176
Motor
Marca/modelo do motor Cummins QSX 15
Potência nominal 447 kW (600 hp) at 2100 rpm
Sistema hidráulico
Fresagem Belt driven
Direcção Hydrostatic
Travão de serviço Hydrostatic in forward and reverse lever
Travão de estacionamento/emergência Failsafe multidisc brake in planetary gears
Portugal atlascopco.com
LIGAÇÕES RÁPIDAS
Loja de publicações Atlas Copco
Galeria de fotos Atlas Copco
Compacta
Boa capacidade de manobra
Raio de viragem reduzido
Potente
Função de activação e desactivação automática, sistema de água
Função de activação e desactivação automática, sistema de transporte
Níveis de ruído e consumo de combustível reduzidos
-
Capacidades
Capacidade do depósito de combustível 1100 l
Depósito hidráulico 300 l
Capacidade do depósito de água 3700 l
top related