electret microphone - sonion · cover electret microphone document: sonion academy poster doc code:...
Post on 09-Aug-2020
1 Views
Preview:
TRANSCRIPT
Solder pads
Membrane SpoutBackplate
Cover
Electret Microphone
Document: Sonion Academy PosterDoc code: 307Version: 001Release date: 2015-08-24
Hybrid + ASIC
Case
How it works
1 A sound wave enters the sound inlet and front volume of the microphone.
2 The rear volume of the microphone creates a pressure reference for the membrane. Incoming sound creates a pressure difference between front and rear volume This pressure difference moves the membrane.
4 The amplifier converts the high impedance of the car-tridge to a low impedance. Due to this the voltage swing at the output terminal represents the potential change at the membrane and is consequently pro-portional to the incoming sound level.
E
v
3 The backplate creates an electrical field over the cartridge. The strength of this depends on the amount of charge in the backplate and on the size of the air-gap. The potential of the membrane changes when it moves in a sound field.
top related