encap systems7192010

ENCAP SYSTEMS

“Encapsulating and

Protecting building systems

for a stronger tomorrow”

www.theencapgroup.com

www.encapseal.com

INDUSTRY QUANDARIES

WATER INTRUSION THROUGH:

CRACKED STUCCO/BRICK/

CONCRETE WALLS

ROOFING COVERING MATERIALS

ELEVATED SLABS

BASEMENT WALLS

MULTI FAMILY, COMMERCIAL &

RESIDENDTIAL STRUCTURES

COMPETITIVE ADVANTAGES

Only Cementitious based coating system in the US

approved by the Health Departments and the EPA

in all 50 States.

More cost effective than traditional stucco

applications

Moisture resistant and allows for breathability

Extensive positive track record and testimonials

Moisture curing capabilities

Easy application process

Extensive color pallet

Extreme adhesion and compaction strength

Past Performance

Dewberry & Davis Study

Andros Island Navy Sub

Base

Patuxten Naval Air Station

Ohio Adjutant general Army

New Haven Court House

Authority

Oakland Housing Authority

Patrick Air Force Base

Veteran’s Hoapital-

Oakland,CA

Veteran’s Hospital- Vieira, FL

Veterans Hospital, Orlando, FL

F.D.O.T

Tyndall Air Base

Greater Orlando Aviation

Authority

Orlando Expressway Authority

Virgin Islands Port Authority/

Marine & Air

Federal Emergency

Management Agency

Homestead Air Base

Ft. Myer, Arlington, VA

Orlando Utilities

Commission, Orlando FL

Potential Projects

• Enviro Tubes

• Gabion Baskets

EnviroTubes

The Encap Group, LLC

EnviroTubes

Enviro-Tubes currently deployed,

shoreline protection and wetland re-

nourishment systems.

Currently for Enviro-Tube protection, we

are the only manufacturer of a coating

system that “significantly” adherers to the

petroleum based Bag Fabric.

Gabion Baskets

The Encap Group, LLC

U.S. ARMY CORPS OF

ENGINEERS (USACE)

TEMPORARY FLOOD PROTECTION

• SYSTEMS DEGRADATION

Examples of Past Performance

Wall Repair

The Encap Group, LLC

BRICK

RESTORATION/ENCAPSULATI

ON

Bethune Cookman College,

Dayton Beach, FL

The Encap Group, LLC

ENCAP SEALWater Intrusion Test

ASTM 1601

The Encap Group, LLC

RESULTS

.083 Gallons/ hour intrusion

(.375 Gallons/ hour intrusion considered

excellent)

The Encap Group, LLC

Asbestos

&

Lead

The Encap Group, LLC

Historical

renovation/preservationLead abatement/encapsulation

• Preserves a historical building’s

appearance while abating the lead base

paint or asbestos wall cladding

EXAMPLES OF PRODUCT USE

WATER PROOFING ON WALLS AND ROOFSOUC

Water Storage Tank,

Lake Highland

Orlando, FL

Encap Seal was applied as

a roof coating this water

Tank.

Allowing heavy

lift crane to traverse

without damage to

The coating.

As a water proof

coating on concrete /

stucco walls

INSULATED WALL PANELS

SYSTEM OVER T1-11 WOOD

SIDING

CONCRETE STRUCTURAL

REPAIRS

DENSE GLASS

PRODUCT SPECS Environmentally friendly

Designed to encapsulate lead based

paint.

Encapsulates some forms of asbestos

Adheres to most sub-straits

Encap Seal achieves maximum

strength of 4500 PSI in 28 days

Pro-Tec-Coat achieves maximum

strength of 6000 PSI in 28 days

NAICS CODES:

236115, 236117, 236220,

237310, 238350, 238990, 238110, 238140,

238310,

238340, 238910, 321114, 337110, 321911,

332323,

541310, 541320, 561790, 561730, 541620,

562910.

COMPETITIVE ADVANTAGESComparison Study of Landing and Patio water proofing systems

Products/ properties SONOGUARD VULKEM 350/351 ENCAP SEALProduct base/ make up Polyurethane/paint Polyurethane/paint Cementitious/mortar

Bonds to smooth surfaces no no Extremely well

Level of surface prep required extensive extensive- moderate minor

Water proofer yes yes yes

Allows for water vapor release no no yes

Available colors standard/limited standard/limited standard/unlimited

Installed applications 3 parts 2 parts 1 part

Tensile strength/ASTM C-780/D-412 752 320

530 PSI w/o fabric. W/

fabric exceeds 2500psi

Compressive strengths N/A 2200psi 4500psi

Adhesion/ peal strengths 275psi 30psi 406 psi

Color application topical applied through-out through-out

slip resistance topical applied sand topical applied sand product finish & texture

Moisture curing yes no yes

bridging limitations 1/16" max 1/16" max

1/2" or < w/o mesh

1/2" or> w/ mesh

Packaging/ coverage 50-80 sqft/gallon 40 & 100 sqft/gallon 40sqft/50lb bag

application thickness 25/25/20 wet mills 40 & 15 wet mills 1/8"-1/4" min.

abrasion resistance ASTM D-4060 1000 cycles 1000 cycles exceeds 1000 cycles

Weatherization/ UV exposure N/A N/A Impervious

Warranty N/A on product only 5 years L&M

Application Risks

Combustible liquid and

Vapor

Combustible liquid and

Vapor none

Requires maintenance agreement for

warranty Yes n/a No

Can be Pressure washed No No Yes

damaged by sharp objects, sand, gravel

metal yes yes no

Storage/shelf life 1 year/with proper storage n/a Unlimited w/proper storage

Clean up Reducer 990 or xylene Reducer 990 or xylene water

Manufacturers: BASF® Tremko, Industries The Encap Group, LLC

The Chemical company

ENCAP SYSTEMS

THE BEGINNING