es, eso series valves - smc · pdf filees, eso series valves ... running, quiet operation and...
Post on 29-Mar-2018
213 Views
Preview:
TRANSCRIPT
219
ES, ESO SERIES VALVES
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
ES, ESO SERIES COMPACT VALVES
Housing is molded Zytel ST 801for toughness and rigidity.
ESO and similar styles have tophose barb or 10-32 threaded fittingfor N.C. exhaust or N.O. inlet.
Coils are available withan AMP# 103959-2 pinconnection or 18” wireleads which utilize #26wire.
Clippard ES valves are unique,with only one internal movingpart that travels a mere .007 inches.
Valves feature low power, coolrunning, quiet operation and fastresponse time. They convert lowvoltage, low current signals intohigh pressure pneumatic outputs.
Valves are small in size with a variety ofcoil voltages and flow options. Mounting
is as close as 7/8” on center.
pneu
air
e
ES, ESO SERIES VALVES
220 Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
Quality DesignThe compact ES valve, like Clippard EV and ET valves, converts low voltage, low current signalsinto high pressure (0-105 psig) pneumatic outputs, utilizing a unique, patented, valving principle.Since there are no sliding parts, and complete poppet travel is only .007”, low powerconsumption and exceptionally long life are assured with this design. No flow is requiredfor cooling because the compact ES is cool, as well as quiet, in operation.
The compact nature of design makes this valve well suited to a wide range of applications inbiomedical, environmental test equipment, textile machines, packaging machinery, computerizedindustrial automation, and portable systems.
Features• Temperature Range: 30˚ - 180˚ F
• Close mounting - 7/8” on center
• Overall height less than 1 inch
• Easy to mount
• Geometric design
• Polymer housing - Zytel ST 801®
super tough
• Pin connectors - AMP # 103959-2or 18” wire leads: #26 wire
• Flow up to 0.6 scfm
NUMBERINGSYSTEMS
PortingBlank - Normally CLOSEDO - Normally Open or
Captivated ExhaustCoil ConnectionsS - Side PinT - Top PinW - WiresB - Board Mount
Orifice OptionsBlank - .025 Dia. Orifice (105 psig)L - .040 Dia Orifice (50 psig)H - .060 Dia Orifice (25 psig)
Valve Type2 - 2 Way3 - 3 Way
E S ❑ - ❑ ❑ - ❑ - ❑ ❑
Options (ESO only)Blank - 10-32 Female1 - 1/16” I.D. Hose Barb2 - 1/8” I.D. Hose Barb
Voltage6 - Volts12 - Volts24 - Volts
NOMINALVoltage Amps Resistance Watts
6 .17 36 1.0
12 .083 144 1.0
24 .042 576 1.0
Zytel ST 801® super tough is a registered trademark of DuPont
Working Range(cont. duty)
90% - 150%of rated voltagep
neu
air
e
221
ES SERIES 2-WAY VALVES
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
inlet
.187
outlet
.875
.687#4-40 thd.
.906
.687
.343
.968
inlet
.187
outlet
.875
.687#4-40 thd.
.906
.687
.984
.343
.968 #4-40 thd.
.906.687
.875
.687
inlet
.187
outlet
.968 #4-40 thd.
.906
.687
.875
.687
outlet
inlet
.187
#10-32thd.inlet
ES-2S - ❑
ES-2T - ❑
ES-2W - ❑
ES-2B - ❑
Type: Normally closed 2-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two#4-40 screws
Ports: Inlet and outlet, 10-32 through manifold
Type: Normally closed 2-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two#4-40 screws
Ports: Inlet and outlet, 10-32 through manifold
Type: Normally closed 2-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two#4-40 screws
Ports: Inlet and outlet, 10-32 through manifold
Type: Normally closed 2-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two#4-40 screws
Ports: Inlet and outlet, 10-32 through manifold
Normally closed 2-way electronic valve with sidepin connectors
Normally closed 2-way electronic valve with toppin connectors
Normally closed 2-way electronic valve with wireleads
Normally closed 2-way electronic valve with boardmount
pneu
air
e
ES SERIES 3-WAY VALVES
222 Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
ES-3S - ❑
ES-3T - ❑
ES-3W - ❑
ES-3B - ❑
exhaust
.343
.968 #4-40 thd.
.906
.687
.875
.687
outlet
inlet
.187
exhaust
.343
.968 #4-40 thd.
.906
.687
.875.687
inlet
.187
outlet
.968 #4-40 thd.
.906.687
outlet
.187
inlet
.875
.687
exhaust
.968 #4-40 thd.
.906
.687
.875
.687
outlet
inlet
.187
#10-32thd.inlet
Type: Normally closed 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H))
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Inlet and outlet, 10-32 through manifold;3-way exhaust through top of valve
Type: Normally closed 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Inlet and outlet, 10-32 through manifold;3-way exhaust through top of valve
Type: Normally closed 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Inlet and outlet, 10-32 through manifold;3-way exhaust through top of valve
Type: Normally closed 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Inlet and outlet, 10-32 through manifold;3-way exhaust through top of valve
Normally closed 3-way electronic valve withside pin connector
Normally closed 3-way electronic valve withtop pin connector
Normally closed 3-way electronic valve withwire leads
Normally closed 3-way electronic valvewith board mount
pneu
air
e
223
ESO SERIES 3-WAY VALVES
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
.250.968
#10-32thd.inlet
.343
#4-40 thd.
.906
.687
.875
.687
outlet
exhaust
3/16
.250.968
#10-32thd.inlet
.343
#4-40 thd.
.906
.687
.875
.687
exhaust
.187
outlet
.250.968
#10-32thd.inlet
#4-40 thd.
.906
.687
.875
.687
exhaust
.187
outlet
.968 #4-40 thd.
.906
.687
.875
.687
outlet
inlet
.187
#10-32thd.inlet
ESO-3S- ❑
ESO-3T- ❑
ESO-3W- ❑
ESO-3B- ❑
Type: Fully ported 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Exhaust and outlet, 10-32 through
manifold; 3-way supply through top of valve
Type: Fully ported 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Exhaust and outlet, 10-32 throughmanifold; 3-way supply through top of valve
Type: Fully ported 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Exhaust and outlet, 10-32 throughmanifold; 3-way supply through top of valve
Type: Fully ported 3-way poppet
Medium: air (40 micron filtration)
Input Pressure: 28” Hg Vac. to 105 psig28” Hg Vac. to 50 psig (L)25” Hg Vac. to 50 psig (H)
Air Flow: 0.6 scfm @ 100 psig0.5 scfm @ 50 psig (L)0.45 scfm @ 25 psig (H)
Voltages: 6, 12, or 24 VDC
Power Consumption: 1 watt at rated voltage
Response: 5-10 ms at max rated pressure
Mounting: Onto manifold with two #4-40 screws
Ports: Exhaust and outlet, 10-32 throughmanifold; 3-way supply through top of valve
Fully ported 3-way electronic valve with side pinconnector
Fully ported 3-way electronic valve with top pinconnector
Fully ported 3-way electronic valve with wire leads
Normally open 3-way electronic valve with boardmount
pneu
air
e
ES, ESO SERIES VALVES MANIFOLDS
224 Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
.500
.750 M1 #10-32 UNF-2B thd..187 deep (2) places
CL
#10-32 UNF-2B thd.both ends
M2.187
.875 typ.
.437
.937
.218
.875 .125 typ.
.203 dia. - thru(2) places
.156
#10-32 UNF-2B thd.typ. this side
L
.500
.750 M1 #10-32 UNF-2B thd..187 deep (2) places
CL
#10-32 UNF-2B thd.both ends
M2
.187
.437
.937
.218
.875.125 typ.
.250 typ.
.203 dia. - thru(2) places
.156
#10-32 UNF-2B thd.typ. this side
L
.156
.875 typ.
Double sided dual mount
26081- ❑
26082- ❑
Single sided dual mount
Dash Valves L(in.) M1(in.) M2(in.)
8 8 4.375 2.875 4.000
12 12 6.125 4.625 5.750
16 16 7.875 6.375 7.500
* ESM-CP plate is to cover individualunused manifold station.
* ESM-CP cover plate is available for onemanifold station.
Dash Valves L(in.) M1(in.) M2(in.)
4 4 4.375 2.875 4.000
6 6 6.125 4.625 5.750
8 8 7.875 6.375 7.500
pneu
air
e
225
ES, ESO SERIES VALVES MANIFOLDS
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
.312
.500
M #10-32 UNF-2B thd..187 deep (2) places
CL
#10-32 UNF-2B thd.both ends
.156
.875 typ..437
.437
.937
.125 typ.
L
#10-32 UNF-2B thd.typ. this side
.312
.500
M #10-32 UNF-2B thd..187 deep (2) places
CL
#10-32 UNF-2B thd.both ends
.437 .875 typ.
.937
.437
.125 typ.
.250 typ.
.156
.156
#10-32 UNF-2B thd.typ. this side
L
Single sided rear mount
Double sided rear mount
26083- ❑
26084- ❑
Dash Valves L(in.) M1(in.)
4 4 3.500 2.875
6 6 5.250 4.625
8 8 7.000 6.375
Dash Valves L(in.) M1(in.)
8 8 3.500 2.875
12 12 5.250 4.625
16 16 7.000 6.375
* ESM-CP cover plate is availablefor one manifold station.
* ESM-CP cover plate is availablefor one manifold station.
pneu
air
e
Single station side port manifold
Single station bottom port manifold
Dual station manifold
ES, ESO SERIES VALVES SINGLE MANIFOLDS
226 Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
1.812
.812
#10-32 thd.inlet
.375
1
.116 dia.mounting holes
#10-32 thd. outlet
#4-40 thd.mounting hole
.116 dia.mounting holes
.812
.812
1
1
#10-32 thd.inlet
.375
#10-32 thd.outlet
#10-32 thd.inlet
#4-40 thd.mounting hole
#10-32thd.outlet
.375
1
1
26090-1
26090-2
26090-3
pneu
air
e
Part No. Used On Lead Length Wire gage
227
ES, ESO SERIES VALVES
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
ES / ESO
The ES/ESO series valve was developed to fit into tighter physicalenvelopes. By reducing the size of the base as well as the size of thecoil, a considerable volume savings was achieved.
As in the case of the EI/EIO product, the ES/ESO uses the singlemoving part design proven many times in the EV/ET/EC seriesvalves. Of course, given the reduced size of the coil the power tooperate increases to 1 watt.
Because of its reliability, the ES/ESO series valve is found in manyof the same applications and industries as its predecessor, the EV/ET,EC. However, the smaller size finds it used more commonly inportable or mobile equipment. This makes the valve particularlyapplicable in home healthcare applications.
Lead Set Chart For ES Valve
Wire Colors
pin 1 pin 2 pin 3
C3-RXB18 ES red ~ black 18” #26
AMP connector #103960-2 with 18” wire leads for ES/ESO valves
.093
.281
.500
black, 26 gauge
18
red, 26 gauge
.437
C3-RXB18
pneu
air
e
top related