ethernet access services definition and implementation
Post on 20-Jan-2016
23 Views
Preview:
DESCRIPTION
TRANSCRIPT
1
Ethernet Access Services Definition and Implementation
2
Co-presented by:
Ralph SantitoroDirector of Carrier Ethernet Solutions
Ralph@Marcom-Services.net
Arie GoldbergOmnitron CEO and Founder
MEF Board Memberagoldberg@omnitron-systems.com
3
Ethernet over SDH (EoS)Ethernet over
PON/WDM
Ethernet Service Delivery over Different Access Network Technologies
EoDSL10/100BaseT
Co
ax
Ether
net
over H
FC
10/100BaseT
Ethernet over Fiber (EoF)
Ethernet over
PDH (EoPDH)10/100BaseT
10/100BaseT
Ethernet can be delivered over many different Ethernet can be delivered over many different types of access network technologiestypes of access network technologies
10/100BaseT
Ethernet Ethernet Service Service ProviderProvider
4
Fundamental Ethernet Service Components
• UNI (User-to-Network Interface)– Physical interface/demarcation between service provider and subscriber– Service start/end point
• NNI (Network-to-Network Interface)– Demarcation/peering point
• between service providers (E-NNI)• between service provider internal networks (I-NNI)
• Ethernet Virtual Connection (EVC)– Logical representation of an Ethernet service as defined by the associate
between 2 or more UNIs
E-NNI I-NNI
These Ethernet Service components are independent of the These Ethernet Service components are independent of the Access or Transport Network Technology to delivery the serviceAccess or Transport Network Technology to delivery the service
Access/Aggregation Access/Aggregation
NetworkNetwork
E-NNI Metro Transport / Metro Transport /
Core NetworkCore Network
Access/Aggregation Access/Aggregation
NetworkNetwork
UNI UNI
EVCEVC
5
Example of Ethernet Service Delivery over Different Access/Transport Technologies
E-NNI
10Mbps EVC10Mbps EVC
I-NNI
Subscriber is unaware of the various transport network Subscriber is unaware of the various transport network technologies used to deliver this 10Mbps Ethernet Servicetechnologies used to deliver this 10Mbps Ethernet Service
PDH (E1/T1) Access PDH (E1/T1) Access
Network ProviderNetwork Provider
E-NNIMPLS Transport MPLS Transport
NetworkNetwork
Fiber Access Fiber Access
NetworkNetwork
UNI2
PDH Access Network• EoPDH: N bonded E1sEoPDH: N bonded E1s
Fiber Access Network• Ethernet over Fiber (EoF)Ethernet over Fiber (EoF)
MPLS Transport Network• Ethernet over MPLSEthernet over MPLS
• PDH Access/Aggregation Network– UNI1: PDH access network bonds 5 E1s for 10Mbps EoPDH– E-NNI: 1Gbps Ethernet over Fiber (802.1ad / QinQ)
• MPLS Transport Network– 802.1ad frames mapped to MPLS transport network– I-NNI: 1Gbps Ethernet over Fiber (802.1ad / QinQ)
• Fiber Access Network– UNI2: 10Mbps Ethernet over Fiber (EoF)
Ethernet Ethernet Service ProviderService Provider
UNI1
6
Ethernet Services and Ethernet Access to IP Services
Ethernet Services are Connectivity Services– Multi-site E-LAN
• Ethernet Private LAN• Transparent LAN Service• VPLS
– Site-to-Site E-Line• Ethernet Private Line• Ethernet Virtual Private Line
Ethernet Access to IP Services– Provide Layer 2 connectivity to IP Service
Networks• Ethernet access to Internet• Ethernet access to Managed VoIP service
Ethernet Service: Layer 2 Service End-to-EndEthernet Service: Layer 2 Service End-to-EndEthernet Access to IP Service: Layer 2 access to IP ServiceEthernet Access to IP Service: Layer 2 access to IP Service
E-LANE-LAN
E-LineE-Line
InternetInternet
VoIPVoIP
E-LineE-Line
7
Comparison of Ethernet L2 VPN and IP VPN Services in Access Network
Fundamental difference between Ethernet and IP Services in the access Fundamental difference between Ethernet and IP Services in the access network is the information used to identify, forward and process service frames network is the information used to identify, forward and process service frames
Ethernet L2 VPN Service• UNIUNI• EVC (service) identified via VLAN IDEVC (service) identified via VLAN ID• CoS identified via PCPCoS identified via PCP• Forwarding on MAC or VLAN IDForwarding on MAC or VLAN ID
IP VPN Service• PortPort• Service identified via IP addressService identified via IP address• CoS identified via DSCPCoS identified via DSCP• Forwarding on IP AddressForwarding on IP Address
Service Service AttributeAttribute Ethernet ServiceEthernet Service IP ServiceIP Service
Customer Handoff Ethernet UNI Ethernet port (or PDH circuit)Service Identification VLAN ID / EVC IP AddressCoS Identification PCP DSCP/ToS
Packet/Frame Routing/Forwarding
MAC Address (E-LAN)VLAN ID (E-Line)
IP Address
Fault Management Link Trace, Continuity Check (Layer 2 Ping), Loopbacks Traceroute, ICMP Ping
Performance Management
Frame Delay, Frame Delay Variation, Frame Loss Ratio, Service Availability
Packet Delay, Packet Delay Variation, Packet Loss,
Service Service ProviderProvider
8
Ethernet Access Service Attributes
Ethernet Service Performance Metrics, Bandwidth Profiles, CoS, Service
Performance, and Fault Management
9
Ethernet Service Performance Management
• Key Metrics1. Frame/Packet Delay (Latency)2. Frame/Packet Delay Variation (Jitter)3. Frame/Packet Loss Ratio4. Service Availability5. Frame/Packet Goodput
• ITU-T has defined measurement framework/metrics for items 1-3– IP packet-based measurements– ITU-T Y.1731 defines how to use 802.1ag to measure service performance
• MEF has defined measurement framework for items 1-4– Ethernet Frame-based measurements– MEF 10.1 defines formulae for:
• Frame Delay (FD), FD Variation, Frame Loss Ratio, Service Availability
The combination of IEEE 802.1ag, ITU-T Y.1731 The combination of IEEE 802.1ag, ITU-T Y.1731 and MEF 10.1 define Ethernet service performanceand MEF 10.1 define Ethernet service performance
10
Ethernet Service Performance Metrics
• Frame Delay (FD) and Frame Delay Variation (FDV)– Measured between UNI pairs via transmission and reception of
a percentile of service OAM frames over a measurement period– Example:
• FD: 30ms (99th percentile over 15 minute interval)• FDV: 10ms (99the percentile over 15 minute interval)
– FD and FDV measurements can be One Way or Round Trip• Frame Loss Ratio (FLR)
– Percentage of Green (in-profile for CIR) Ingress frames received at Egress UNI over a measurement period
– Example FLR: 2% ( over 15 minute interval) • Service Availability
– Percentile Amount of time, FLR meets its service level objectives over a measurement period
– Example Availability: 99.9% (over 1 month interval)
11
Bandwidth Profiles (BWP) and CoS
Bandwidth Profiles per EVC (service) and per CoS– CIR (Committed Information Rate)
• CIR assured via Bandwidth Reservation and Traffic Engineering
– EIR (Excess Information Rate)
• EIR bandwidth is considered ‘excess’
• Traffic dropped at congestion points in the network
– CBS/EBS (Committed/Excess Burst Size)
• Higher burst size results in improved performance
EVC-1
CIR
EIREVC-2
CIR
EIR
EVC-3
CIR
EIR
UNIEVC 1
CoS 61Mbps CIR for VoIP
CoS 26Mbps CIR for VPN data traffic
3Mbps for Internet AccessEVC 2
10Mbps UNI
(port)
BWPs can divide bandwidth per EVC (service) over a single UNI
– Multiple services over same port (UNI)– CoS markings enable the network to
determine the network QoS to provide
CIR defines the assured bandwidth CIR defines the assured bandwidth EIR improves the network’s Goodput EIR improves the network’s Goodput
12
Ethernet Service Connectivity Fault Management
• IEEE 802.1ag for EVC Connectivity Fault Management– For Protection/Restoration
• Connectivity Check Messages (CCMs) for heartbeats– For diagnostic purposes
• Connectivity Check (Layer 2 Ping), Link Trace, Loopbacks
• CCMs initiated between:– Management Endpoints (MEPs / UNIs)– Management Intermediate Points (MIPs / NNIs)– Management Endpoints and Intermediate Points (UNI-NNI)
Connectivity Fault Management provided by Connectivity Fault Management provided by Carrier Ethernet network elements and NIDs Carrier Ethernet network elements and NIDs
13
Ethernet Link Fault Management
• IEEE 802.3ah for Link Fault Management for (first mile) Ethernet access connection– Link Fault Detection and Remote Loopbacks
• Layer 1 fault management used for transport connections used to deliver Ethernet services– Ethernet over PDH– Ethernet over SDH– Ethernet over DSL– Ethernet over HFC Coax
Ethernet Link Fault Management performed by Ethernet Link Fault Management performed by Carrier Ethernet network elements and NIDsCarrier Ethernet network elements and NIDs
14
Access Access NetworkNetwork
Metro Metro AggregationAggregation
NetworkNetwork Access Access NetworkNetwork
IP/MPLS CoreIP/MPLS CoreNetworkNetwork Metro Metro
Aggregation Aggregation NetworkNetwork
Maintenance Association (MA)
MEP#1 MEP #2
MIPMIP
Ethernet Service Continuity Check
MEP #1No CCMs received from MEP #2 within 30ms (3 x 10ms) MEP #2
Report on CC fault if no CCMs are received from MEP #1 for 30ms
MEP #1Send CCMs with RDI flag set
MEP #2Remote alarm detected by received RDI Report alarm to management system
MEP #2Initiate protection switchover
MEP #1CCMs sent every 10ms on working/protect paths Check for CCMs received from MEP #2 on working/protect paths
MIP MIPMIPMIP
UNIUNI
MEP #2CCMs sent every 10ms Check for CCMs received from MEP #1
MEP #1Report CC fault to management system
Ethernet continuity check is analogous to IP’s Ping but does much Ethernet continuity check is analogous to IP’s Ping but does much more more
15
Ethernet Link Trace
Access Access NetworkNetwork
Metro Metro AggregationAggregation
NetworkNetworkAccess Access NetworkNetwork
IP/MPLS CoreIP/MPLS CoreNetworkNetwork Metro
Aggregation Network
MEP MEPMIPMIP MIPMIP
Link trace Reply
UNIUNI
Ethernet Link Trace is analogous to IP’s TracerouteEthernet Link Trace is analogous to IP’s Traceroute
16
Some Benefits of Ethernet L2 VPN versus IP VPN
L2 VPN Service L2 VPN Service BenefitBenefit Enterprise BenefitsEnterprise Benefits Service Provider Service Provider
BenefitsBenefits
• No IP awareness required
– Especially important with IPv6 applications
• No service provider coordination of IP addresses
• No concerns of service provider’s IPv6 capabilities
• No need for service provider to have IPv6-capable routers
• Fault management
– Ethernet OAM versus IP, MPLS and Ethernet OAM
• Simpler OAM (lower OpEx) by managing a single network layer
– Perform just Ethernet OAM instead of Ethernet OAM + MPLS (OAM) + IP OAM for fault management
•Multi-site connectivity
• Simpler to add new location to an E-LAN service (auto learning)
• In many cases, simpler to deploy L2 multipoint services
17
Summary
• Ethernet Service are agnostic of the Access or Transport Network Technology
– Facilitates a common service portfolio for all markets
• Ethernet Service can be:
– A Layer 2 Connectivity Service (E-Line or E-LAN L2 VPN)
– A Layer 1 Private Line Replacement (EPL)
– A Layer 2 access connection to an IP Service
• Ethernet Access to Internet
• Managed IP VPN or VoIP service
18
Presentation available for download at: http://MetroEthernetForum.org/Presentations
top related