exothermic joint connection
Post on 14-Apr-2018
227 Views
Preview:
TRANSCRIPT
-
7/27/2019 Exothermic Joint Connection
1/7
AMIABLE IMPEX. Email info@amiableimpex.com Tel. +91-22-28933996 / +91-9594899995 URL-www.amiableimpex.com
Exothermic Joint
Exothermic Joint, also known as exothermic bonding, thermite welding (TW), and Thermit
welding. There are many advantages of using Exothermic Joint. The most important one being that the
process produces a molecular joint and not just a mechanical one in between the conductors. It is produced
through a starting reactant which provides enough energy to activate the welding reaction. This takes placequickly and safely inside a graphite mould. The mould is designed specifically for a certain union depending
on the elements to be welded and the joint type required. We guarantees all types of joints, not only copper
cable unions but also to weld tapes, brass metallic pieces, stainless steel, steel ground rods covered with
copper, etc. It is especially useful for joining dissimilar metals.
Amiable Impex was the first Company in Mumbai to introduce and supply Exothermic Joint Powder and
Accessories. AI-Weld Exothermic welded electrical connections supply from us will never loosen, corrode or
increase in resistance. We are one of the largest importer ofExothermic Joint in India. Due to our
Superior and Best Quality we are able to sell our product to Railways Contractors, Rail Metro,
Telecommunications, Earthing and Lightning Installers Industries, as well as to Electrical Suppliers etc.
mailto:info@amiableimpex.comhttp://exothermic-welding.com/mailto:info@amiableimpex.comhttp://exothermic-welding.com/ -
7/27/2019 Exothermic Joint Connection
2/7
AMIABLE IMPEX. Email info@amiableimpex.com Tel. +91-22-28933996 / +91-9594899995 URL-www.amiableimpex.com
What does Exothermic Joint means?
Exothermic Joint System is a very effective and cost efficient method of making electrical connections in
high quality which includes Large Connection or Small Connection. It is a simple self-contained system that
uses the high temperature reaction of powdered copper oxide, aluminium and other required chemical and
materials, within a mould to form permanent electrical connections.
For more details please visit our website: http://exothermic-welding.com/what-is-exothermic-weld.html
Features of Exothermic Joint:
Superior electrical conductivity to the conductors themselves.
Does not corrode, oxidize or degrade with time and is resistant to galvanic coupling.
Able to withstand repeated electrical discharges.
Never increases its resistance.
Has greater mechanical and squeezing resistance than the conductors themselves.
What and Which Metal can be Weld through Exothermic Joint ?
The process ofExothermic Joint is a method of making electrical connections from Copper to
Copper or Copper to Steel and it can join any Metals to Metals like Bronze, Galvanized metals and Stainless
steel etc , in which no outside source of heat or power is required.
What are the Accessories Requires for Exothermic Joint Joints?
1) Graphite Mould
2) Exothermic Joint
3) Steel Disc
4) Ignite Powder / Starting Powder
5) Cleaning Brush Set (Soft, Hard and File Card Brush)
6) Flame Torch
7) Mould Handle
8) Hand Gloves
9) Flint Gun
10) Sealing Compound
For more details please visit our website: http://exothermic-welding.com/exothermic-weld-accessories.html
What is the Process for Exothermic Joint OR How the Metal is Welded by Exothermic Joint ?
In Exothermic Joint Process, the following are the steps
Step 1 - The two conductors that is to be joined are placed in the weld cavity and than the steel disc is
located in the base of the crucible in the Graphite Mould.
Step 2 - After the disc is placed in the Mould, AI-Weld Exothermic Joint Material is poured down into
Graphite Mould followed by Starting PowderStep 3 - Some Ignite Powder should also be sparkled on the Mouth of Mould and than ignited by Flint Gun.
The process of igniting the particles creates extremely high heat i.e upto 1400 degree Celcius and
produces Exothermic Reaction which also melts the Steel Disc and then the Exothermic Joint flows into the
weld cavity thus filling any available space and completes the weld. In weld cavity the molten copper alloy
partially melts the conductors. The molten copper alloy gets cooled and forms a fusion weld which solidify
before it is removed from the mould.
This entire process takes only upto 10 to 15 seconds to complete. Then the mould is ready for the
next weld after a brief cleaning with a brush. Exothermic welded connections produce a permanent
connection, superior in performance to any known mechanical or pressure type surface-to-surface contact
connector. Due to the fact that the connection produced is a molecular bond so an exothermic welded
connection will not loosen and there will be increase in resistance over the lifetime of the installation.
mailto:info@amiableimpex.comhttp://exothermic-welding.com/what-is-exothermic-weld.htmlhttp://exothermic-welding.com/exothermic-weld-accessories.htmlmailto:info@amiableimpex.comhttp://exothermic-welding.com/exothermic-weld-accessories.htmlhttp://exothermic-welding.com/what-is-exothermic-weld.html -
7/27/2019 Exothermic Joint Connection
3/7
AMIABLE IMPEX. Email info@amiableimpex.com Tel. +91-22-28933996 / +91-9594899995 URL-www.amiableimpex.com
The Process is very Simple and hence a Laymen can do the Job Work by just seeing the process once.
Hence one need to ensure that the process should be undertaken carefully and proper instruction should be
maintained by the Laymen.
For more details please visit our website: http://exothermic-welding.com/exothermic-weld-process.html
What are the Advantages or Features of Weld done from Exothermic Joint
Molecular bonding of Copper to Copper and other metals can be made
Ensure excellent conductivity in the electrical grounding
Exothermic Joint Joint ensures permanent molecular bond
Longer life span Not required any external power or heat source required
Safe operation, without professional technology knowledge, easy to learn
Very simple tools and equipment that results in execution of high efficiency
Will not deteriorate with age and will never loosen or corrode etc
Application
It is ideal for the following application:
- Earthing joints,
- Strip joints,
- Solid wire joints,
- Rod joints,
- Cable joints,
- Lug connections,
- Cable and Rail joints,
- Continuity bonding and track circuiting, etc.
Hence this Exothermic Joint is used in Grounding & bonding and lightning protection in Power
plants , Substations , Transmission line , Refinery , Industrial plant , Commercial plants , Telecommunication
tower , Building , Housing etc.
Type of Joints possible from Exothermic Joint:
1) Horizontal Joints
2) Vertical Joints
3) Straight Joints
mailto:info@amiableimpex.comhttp://exothermic-welding.com/exothermic-weld-process.htmlmailto:info@amiableimpex.comhttp://exothermic-welding.com/exothermic-weld-process.html -
7/27/2019 Exothermic Joint Connection
4/7
AMIABLE IMPEX. Email info@amiableimpex.com Tel. +91-22-28933996 / +91-9594899995 URL-www.amiableimpex.com
4) Cross Joints
5) Overlap Joints
6) L shape Joints
7) T shape Joints
According to the customers specification and requirement any shape Joints is Possible through our
innovative design of Graphite Moulds.
Overview:
In Exothermic Joint, aluminium dust reduces the oxide of another metal, most commonly iron oxide,
because aluminium is highly reactive. Iron(III) oxide is commonly used:
Fe2O3 + 2 Al 2 Fe + Al2O3
The products are aluminium oxide, free elemental iron, and a large amount of heat. The reactants are
commonly powdered and mixed with a binder to keep the material solid and prevent separation. Commonly
the reacting composition is 5 parts iron oxide red (rust) powder and 3 parts aluminium powder by weight,
ignited at high temperatures. A strongly exothermic (heat-generating) reaction occurs that via reduction and
oxidation produces a white hot mass of molten iron and a slag of refractory aluminium oxide. The molten
iron is the actual welding material; the aluminium oxide is much less dense than the liquid iron and so floats
to the top of the reaction, so the set-up for welding must take into account that the actual molten metal is
at the bottom of the crucible and covered by floating slag.
Other metal oxides can be used, such as chromium oxide, to generate the given metal in its elemental form.
Copper thermite, using copper oxide, is used for creating electric joints in a process called cadwelding:
3 CuO + 2 Al 3 Cu + Al2O3
Thermite welding is widely used to weld railway rails. The weld quality of chemically pure thermite is low
due to the low heat penetration into the joining metals and the very low carbon and alloy content in the
nearly pure molten iron. To obtain sound railroad welds, the ends of the rails being thermite welded are
preheated with a torch to an orange heat, to ensure the molten steel is not chilled during the pour. Because
the thermite reaction yields relatively pure iron, not the much stronger steel, some small pellets or rods ofhigh-carbon alloying metal are included in the thermite mix; these alloying materials melt from the heat of
the thermite reaction and mix into the weld metal. The alloying beads composition will vary, according to
the rail alloy being welded.
Exothermic Connection between Cable to Cable Joint
The AiWeld Exothermic Joint is the great quality product that helps to have permanent Joint between
Copper Cables to Copper Cable. Our Exothermic Powder works best for Copper Cable to Copper Cable
Connection.
Infact through our continuous innovative development and Quality Improvement Passion our AiWeld
Exothermic Joint can not only joint Copper to Copper Cable but also helps to Joint any Cables made from
any Metals. Following are the Joint Connection Possible from our AiWeld Exothermic Joint.
Exothermic Connection between Cable to Cable JointThe AiWeld Exothermic Joint is the great quality product that helps to have permanent Joint between
Copper Cables to Copper Cable. Our Exothermic Powder works best for Copper Cable to Copper Cable
Connection.
Infact through our continuous innovative development and Quality Improvement Passion our AiWeld
Exothermic Joint can not only joint Copper to Copper Cable but also helps to Joint any Cables made from
any Metals. Following are the Joint Connection Possible from our AiWeld Exothermic Joint.
mailto:info@amiableimpex.commailto:info@amiableimpex.com -
7/27/2019 Exothermic Joint Connection
5/7
AMIABLE IMPEX. Email info@amiableimpex.com Tel. +91-22-28933996 / +91-9594899995 URL-www.amiableimpex.com
As referred by the Image, one can imagine that our Exothermic Joint can joint Copper Cable to Copper
Cable in any Shape. The following shape possibilities is as below:1) Horizontal Joint of Copper Cable to Copper Cable Connection
2) Vertical Joint of Copper Cable to Copper Cable Connection
3) Overlap Joint of Copper Cable to Copper Cable Connection
4) Cross Joint of Copper Cable to Copper Cable Connection
5) T Shape Joint of Copper Cable to Copper Cable Connection
6) L Shape Joint of Copper Cable to Copper Cable Connection
7) Y Shape Joint of Copper Cable to Copper Cable Connection
8) Parallel Shape Joint of Copper Cable to Copper Cable Connection etc.
As per the Customer Specification and Requirement any shape Joint is Possible by designing the
Graphite Mould accordingly.
mailto:info@amiableimpex.commailto:info@amiableimpex.com -
7/27/2019 Exothermic Joint Connection
6/7
AMIABLE IMPEX. Email info@amiableimpex.com Tel. +91-22-28933996 / +91-9594899995 URL-www.amiableimpex.com
Amiable Impex is the only Company in India that offer Quality AiWeld
Exothermic Joint at reasonable rate and ensures delivery within 10 to 15
days in India. So Get high quality products at quickest lead time with fast
response time. Full Customer Satisfaction. Our Products are tested and
approved by CPRI Govt. Body and we are also certified by ISO 9001:2008
Our Other products in Exothermic Joint / Thermit Weld
Regd. Office AMIABLE IMPEX.
101/A, Surya Darshan, Pai Nagar,
Borivali(W), Mumbai 400092. India.
Phone: 022-28933996 / 022-28957101
Fax: 022-28957102
S.no Table Of Content
1) Exothermic Joint
2) What is Exothermic Joint
3) Exothermic Joint Accessories
4) Exothermic Joint Process
5) Exothermic Connection Joint
6) Exothermic related Certificates
7) Exothermic Joint Connection between Cable to Cable Connection
8) Exothermic Joint joint for cable to ground rod connection
9)Exothermic Joint joint for Copper Cable to Copper Strip / GI TapeConnection
10) Exothermic Joint joint for Cable to Steel Connection
11)Exothermic Joint joint for Copper Strip / GI Strip to Ground Steel Plate
Connection
12) Exothermic Joint joint for Rod to Steel Connection
13) Exothermic Joint joint for Ground Rod to Ground Rod Connection
14) Exothermic Joint joint for Copper Strip to Ground Rod Connection
15) Exothermic Joint joint for Copper Strip to Copper Strip Connection
16) Exothermic Joint joint for Copper Strip to Rebar Connection
17) Exothermic Joint joint for Copper Cable to ReBar Connection
18) Exothermic Joint joint for Rod To ReBar Connection
19) Exothermic Joint joint for Rebar to Rebar Connection
mailto:info@amiableimpex.comhttp://exothermic-welding.com/http://exothermic-welding.com/what-is-exothermic-weld.htmlhttp://www.exothermic-welding.com/exothermic-weld-accessories.htmlhttp://www.exothermic-welding.com/exothermic-weld-process.htmlhttp://www.exothermic-welding.com/exothermic-weld.htmlhttp://www.exothermic-welding.com/certificate.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-cable-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-ground-rod-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/copper-cable-to-strip-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/copper-cable-to-strip-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-steel-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/steel-to-copper-tape-joints.htmlhttp://www.exothermic-welding.com/exothermic-weld/steel-to-copper-tape-joints.htmlhttp://www.exothermic-welding.com/exothermic-weld/steel-to-rod-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/ground-rod-to-ground-rod-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/ground-rod-to-tape-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/copper-strip-to-tape-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/tape-to-rebar-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-rebar-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/rod-to-rebar-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/rebar-to-rebar-connection.htmlmailto:info@amiableimpex.comhttp://www.exothermic-welding.com/exothermic-weld/rebar-to-rebar-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/rod-to-rebar-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-rebar-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/tape-to-rebar-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/copper-strip-to-tape-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/ground-rod-to-tape-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/ground-rod-to-ground-rod-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/steel-to-rod-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/steel-to-copper-tape-joints.htmlhttp://www.exothermic-welding.com/exothermic-weld/steel-to-copper-tape-joints.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-steel-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/copper-cable-to-strip-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/copper-cable-to-strip-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-ground-rod-connection.htmlhttp://www.exothermic-welding.com/exothermic-weld/cable-to-cable-connection.htmlhttp://www.exothermic-welding.com/certificate.htmlhttp://www.exothermic-welding.com/exothermic-weld.htmlhttp://www.exothermic-welding.com/exothermic-weld-process.htmlhttp://www.exothermic-welding.com/exothermic-weld-accessories.htmlhttp://exothermic-welding.com/what-is-exothermic-weld.htmlhttp://exothermic-welding.com/ -
7/27/2019 Exothermic Joint Connection
7/7
AMIABLE IMPEX. Email info@amiableimpex.com Tel. +91-22-28933996 / +91-9594899995 URL-www.amiableimpex.com
Admin -
501/A, Surya Darshan, Pai Nagar,
Borivali(W), Mumbai 400092. India.
Phone: 022-28933996 / 91-9594899995
MAULIK SHAH
E-mail: maulik@amiableimpex.com
Mob :+ 91- 9594899995
UJJWAL SHAH
Email: ujjwal@amiableimpex.com
Website - www.exothermic-welding.com
mailto:info@amiableimpex.commailto:info@meetindustries.co.inhttp://www.exothermic-welding.com/mailto:info@amiableimpex.comhttp://www.exothermic-welding.com/mailto:info@meetindustries.co.in
top related