exploration drilling products -...
Post on 16-Oct-2018
222 Views
Preview:
TRANSCRIPT
Lo Campino 432 / Quilicura / Santiago - ChilePhone: +56 (2) 620 7800
Av. Santa Ana 180 / Ate Vitarte / Lima - PerúPhone: +51 (1) 326 0494
E X P L O R A T I O N D R I L L I N G P R O D U C T S
w w w . d i a m a n t i n a c h r i s t e n s e n . c o m
s a l e s @ d i a m a n t i n a c h r i s t e n s e n . c o m
UP+7 is indicated for 4 to 7 Mohs rock formations (cracked or semi-tight) with great penetration speed and long useful life.
UP+10 is indicated for 8 to 9.5 Mohs formations (semi-tight and tight) with great penetration speed and long useful life.
INNER AND OUTER REINFORCED DIAMETER Reinforced with tungsten carbide and Thermally Stable Polycrystalli-ne (TSP) diamond inserts. Thanks to the strategic location of these inserts the lost of inner and outer diameter is avoided extending the useful life of the bit.
THESE BITS ALLOW FASTER, LONG LASTING AND CONSTANT CUTTING, due to the combination of matrix and high quality coated synthetic diamonds.
DIAMANTINA CHRISTENSEN TECHNOLOGIES offers a full line of tools and accessories for the diamond core drilling industry.The experience, expertise, technology and research, allows us to continually improve our products.We have expanded our line of drilling and replacement tools. In addition, our engineering team develops solutions tailored to customer needs.Our manufacturing facilities in Santiago, Antofagasta and Lima are ISO 9001:2008 certified.
DIAMANTINA CHRISTENSEN TECHNOLOGIES
Leader in Latin America in the manufacture of
products for mineral exploration.
UP Series gives diamond core drilling further adaptation and resistance increasing your productivity.
DurationRateAdaptation in different types of terrain
VERSATILITY & DURABILITY
SERIES SELECTION TABLE
ROCKTREND
CHARACTERISTICS OF THE ROCKNEW SERIE UP EXAMPLES
CRAC
KED
ABRA
SIVE
SOFT
TIGH
T
NON-
ABRA
SIVE
HARD
SERIE N°
2
6B
7
7B
7F
8
8B8C
10A
10C
10D
10E
11
9C
9D
3
4A
Extremely abrasive, coarse grained. Soft to slightly hard formations, highly cracked with failures and landslides.
Very abrasive, medium to coarse grained. Soft to slightly hard formations, very cracked to slightly cracked.
Abrasive, medium to coarse grained. Medium hard formations, moderately cracked to slightly cracked.
Moderate abrasive, medium to coarse grained. Medium hard to hard formations, slightly cracked to tight.
Slightly abrasive, fine to medium grained. Hard and tight formations.
Slightly abrasive, fine grained. Very hard and tight formations.
Non-abrasive. Very fine grained. Extremely hard and very tight formations.
Limestone, Sandstone, Conglomerate
Alluvial, Sandstone, Shale, Ophite
Garbo, Shale, Andesita, Basalt
Pegmatite, Garbo, Monzonite
Porphyry, Granite, Gneiss, Garbo
Diorite, Taconite, Gabbro, Granite
Chert, Rhyolite, Quartz
IMPREGNATED SERIES AVAILABLE IN 10 mm - 12 mm & 15 mm - 20 mm.
UP+7 is indicated for 4 to 7 Mohs rock formations (cracked or semi-tight) with great penetration speed and long useful life.
UP+10 is indicated for 8 to 9.5 Mohs formations (semi-tight and tight) with great penetration speed and long useful life.
THREADPROFILE 90°
Operation range From 800 m. deep in H to 1500 m. deep in N.
Operation range From 1200m. deep in H to 2500m. deep in N.
Excellent performance in case of stuck rods.
ROD WT CASING2½” TPI tapered rod (Thread per inch), trapezoidal with a straight 90° flank. Provides excellent pull-up for casing (casing/rods lifting), average tube joint resistance 40% to 50% (load efficiency).
ROD OAvailable in P, H, N, B and A diameters.Trapezoidal taper thread (3 threads per inch).Average strength of threaded joint: 35% of the base material (load efficiency).
ROD MOAvailable in H and N diameters.Trapezoidal taper thread with 90 ° flank of 3 threads per inch.Average resistance of threaded joint: 45% of base material.This thread gives better performance while tripping rods out of the drill hole (pull up).
MAXIMUM TIGHTENING TORQUE
AO / 330 lbf x ft - 406 (Nm.)
BO / 410 lbf x ft - 550 (Nm.)
NO / 560 lbf x ft - 750 (Nm.)
NMO / 1750 lbf x ft - 2400 (Nm.)
HO / 1000 lbf x ft - 1350 (Nm.)
HMO / 2600 lbf x ft - 3500 (Nm.)
PW / 3000 lbf x ft - 4000 (Nm.)
A
B
N
H
P
MAXIMUM DRILLING DEPTH
AO / 1000 m. (3200 ft)
BO / 1500 m. (4900 ft)
NO / 1500 m. (4900 ft)
NMO / 2500 m. (8200 ft)
HO / 800 m. (2600 ft)
HMO/ 1200 m. (3900 ft)
PW / 1500 m. (4900 ft)
PO / 200 m. (650 ft)
A
B
N
H
P
Heat treated terminals in 30-36 HRC give a better wear resistance
Replaceable inner tubes with circlip system
Thread design don´t get spoiled
Tubes made of stell alloy improve its resistance to abrasive wear
Interchangeable inner tubes stabilized in its length avoid vibration
Internal geometry designed to enable greater air circulation
Tube quality AISI 4130 seamless
Rod total weight: 172 kg. Outer tube: 125 kg.Inner Tube: 47 kg.
Inner tube replacement also available in low cost steel / AISI 1026-Seamless
UP+7 is indicated for 4 to 7 Mohs rock formations (cracked or semi-tight) with great penetration speed and long useful life.
UP+10 is indicated for 8 to 9.5 Mohs formations (semi-tight and tight) with great penetration speed and long useful life.
Diamonds and Reinforcements:The natural diamonds and WC sparks (tungsten carbide) have been replaced by high quality synthetic diamonds and TSP rectangular inserts (polycrystalline diamond thermally stable) apart from keeping WC rectangular inserts.All these elements have been redistributed in the matrix to maximize the protection area of the bit and, therefore, the resistance to erosion and useful life of the reamer shell.
MatrixAfter many field tests, it was found the ideal relation between hardness and ductility of the matrix, increasing hardness to maximize the resistance to erosion and maintain the ductility needed to resist all adverse conditions under drilling without problems.
SYNTHETIC DIAMOND REAMER SHELL
NEWCone to the top of the bit, which reduces erosion of the reamer shell by softening the change of diameter between the drill and the reamer shell making easier the reaming of the hole.
Thanks to all these new qualities the new synthetic diamond reamer shell of Diamantina Christensen will guarantee an excellent performance of all terrain equipment.
Different models and configurations
Less maintenance cost
High durability Fluid controloptions
Reaming Shells with multiple rings to reduce the hole deviation.
STRAIGHT BROACHINGDesigned for cracked to tight rock.Adaptable to irregular core forms.The broaching provides a very elastic Core Lifter, which allows its usage in different types of terrain.
OUR NEW TITANIUM CORE LIFTER LINE HAS BEEN SUCCESSFULLY TESTED IN FIELD, ALLOWING SUBSTANTIAL INCREASES IN ITS LIFE SPAN.
ALL CORE LIFTER MODELS ARE AVAILABLE WITH OUR NEW HIGHLY RESISTANT TO EROSION ALLOY CASING, WHICH INCREA-SES THE USEFUL LIFE SIGNIFICANTLY.
CORE LIFTER SLOTTEDIdeal for use in competent ground conditionsIncreased grip area.
HIGH QUALITY CORE LIFTERS IN DIFFERENT SETTINGS FOR MORE EFFICIENT OPERATIONAL PERFORMANCE.
This image illustrates the CORE LIFTER position applied to core in diamond core bits with side waterways.The CORE LIFTER retains the core by traction for cutting.
HELICAL BROACHINGDesigned for competent to slightly cracked terrain. The angular broaching makes cutting easier.It widens the inner zone of contact with core and avoids slides; thus, it improves core recovery.
TYPE DIAMETER (Inches)
3,345”PO
3,270”PO3
2,500”HO
2,406”HO3
1,432”BO
1,654”BTW
BO3 1,320”
1,995”NO2
2,209”NTW
1,775”NO3
1,875”NO
UP+7 is indicated for 4 to 7 Mohs rock formations (cracked or semi-tight) with great penetration speed and long useful life.
UP+10 is indicated for 8 to 9.5 Mohs formations (semi-tight and tight) with great penetration speed and long useful life.
OVERSHOT & CORE BARRELA complete line of core barrels with double and triple tube, specially designed to achieve high performance and to obtain the full core recovery in any drilling application W/L
WATER SWIVELFor all applications to ensure efficient cooling of the drill continuously. Their components allows a under load rotation and self sealing. Compact size, lightweight, easy replacement and roads for bearing lubrication.
WEAR SLEEVE SANDVIK 5 7/8”Diameter: 5 13/16” (147.6mm)Lenght: 124mmRef. Code: 09271030111
WEAR SLEEVE SANDVIK 5 3/4”Diameter: 5 11/16” (144.4mm)Lenght: 122mmRef. Code: 09271030106
WEAR SLEEVE THOMPSON 5 5/8”Diameter: 5 9/16” (141.3mm)Lenght:114mmRef. Code: 0927103108
WEAR SLEEVE THOMPSON 5 1/2”Diameter: 5 7/16” (138.1mm)Lenght: 119mmRef. Code: 09271032802
WEAR SLEEVE SANDVIK 5 1/2”ATLAS COPCO 5 1/2”Diameter: 5 7/16” (138.1mm)Lenght: 130.2mmRef. Code: 09271031804
WEAR SLEEVE SANDVIK 5 1/4” (ANTIGUO)SANDVIK 5 1/4” (NUEVO)Diameter: 5 3/16” (131.7mm)Lenght:125mmRef. Code: 09271031803
Conection to Grey Rock Bit Sub: Whitworth Thread
Conection to Yellow Rock Bit Sub: Square Thread
HOISTING PLUGEnsures the materials movement from the pit with the necessary capabilities for their security. Lifting capacity: 10.000 to 45.000 lb / According depth pit.
CORE LIFTER CASE / CORE LIFTERThe precision and quality of our springs holder are essentials for the optimal core recovery allowing increased production and avoiding costly losses core generated.
ADAPTORSCan joint the entire drilling line with the pieces you need.
CASING ADVANCERCasing Advancer allows to drill and advance the casing in one simple operation.
UP+7 is indicated for 4 to 7 Mohs rock formations (cracked or semi-tight) with great penetration speed and long useful life.
UP+10 is indicated for 8 to 9.5 Mohs formations (semi-tight and tight) with great penetration speed and long useful life.
ROD LIFTERThe gripping or clamping is performed in the sector that has tungsten grit, which is opened and tightened inside the rod by moving the conical components. This ensures easy gripping and extraction.
CUTTERSCutters for drill pipe and casing and all its parts.
FOOT CLAMP, JAWS AND FULL GRIP WRENCH For inner tubes manipulation.
FISHING TOOLSVarious tools that allow easy removal rescue of items stuck in the pit.
HYDRAULIC HOSES All measurements and diameters to replace on your machine.
RIDGID WRENCHESFull line of wrenches for coupled rods.
CORE BOXLightweight and resistance in HO y NO diameter.
TOOLS FOR MINING OPERATIONDTH Rods, adaptors, rung and bits.
top related