filtration catalogue - bulven-filters.com · 2016-03-29 · filtration catalogue product range 2016...
Post on 24-May-2020
1 Views
Preview:
TRANSCRIPT
World Class Filtration Solutions
Filtration Catalogue Product Range 2016
Porvair Filtration Group
Filtration Catalogue Product Range 2016
www.porvairfiltration.com
54
Co
nte
nts
- Pr
od
uct
Porv
air
Filtr
atio
n G
rou
p
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
INTRODUCTION
Introduction to Porvair Filtration Group
6-7
Our Locations 8-9
Product Innovation, Manufacturing, Testing and Quality
10-11
PRODUCTS
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
12-13
Sinterflo® F Sintered Metal Fibre
Cylindrical 14-15
Pleated 16-17
Sinterflo® P Sintered Metal Powder
Cylindrical 18-19
Sinterflo® M Metal Mesh
Cylindrical 20-21
Pleated 22-23
Sinterflo®MCSinteredMetalComposite
Cylindrical 24-25
Candle Filters
Candle Filters (forpolymermelt) 26
RempakTM Candle Filters (forpolymermelt) 27
PleatedFilterElements(Aerospace)
PleatedFilterElements(Aerospace) 28
LEAF DISC AND SOLID PLATE FILTERS 30-31
Leaf Discs (forpolymermelt) 32
Solid Plate Leaf Disc Filters (forpolymermelt) 33
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
35
PleatedFilterElements(Aerospace)
PleatedFilterElements(Aerospace) 37
Pre-Filters
CarbofilTM 38-39
CryptofilTM 40-41
KlearfilTM 42-43
MicrofllTM 44-45
PolyfilTM II 46-47
TekfilTM 48-49
TrapfilTM 50-51
MembraneFilters
AquafilTM 52-53
BiofilTM II 54-55
BiofilPlusTM 56-57
ChemifilTM 58-59
FluorofilTM 60-61
FluorofilTM Plus 62-63
FluorofilTM F100 64-65
HydrofilTM 66-67
HydrofilTM Plus 68-69
VinofilTM 70-71
Junior Pre-Filters
MicrofilTM Junior 72-73
PolyfilTM Junior 74-75
JuniorMembraneFilters
BiofilTM Junior 76-77
FluorofilTM Junior 78-79
VentafilTM 80-81
FILTER ELEMENT AND CARTRIDGE HOUSINGS
82-83
Filter Housings 84-85
IN-LINE AND LAST CHANCE FILTERS 86-87
Metallic In-Line and Last Chance Filters
Metal Mesh Filter Discs 88
Metal Fibre Filter Discs 89
Metal Powder Filter Discs 90
In-LineElementsandScreens 91
Union Filters and Miniature Housings 92
In-line Filter Housings 93
FinalInkFilters 94
In-Line Filters (30mm,StainlessSteel) 95
PleatedUnrimmedDiscFilters 96
MicrodiscTM 3SS 97
MicrodiscTM 4SS 98
Grid Filter and O-Ring 99
PolymericIn-LineandLastChanceFilters
MicrodiscTM 1PA (15mmS-VentDiscFilter) 100
MicrodiscTM 2PA (25mmS-VentDiscFilter) 101
MicrodiscTM 3PS (33mmDiscFilter) 102
MicrodiscTM 4PS (45mmStandardDiscFilter) 103
MicrodiscTM 4PV (45mmPre-PumpDiscFilter) 104
MicrodiscTM 7PS (74mmDiscFilter) 105
Bullet Filters 106
In-Line Filters (PEEK) 107
In-Line UV Filters (PEEK) 108
LastChanceInkjetFilters 109
DISPOSABLE CAPSULE FILTERS 110-111
MicrocapTM 112
MicroprintTM 113
MicrojetTM 114
FLUIDISATION AND POWDER HANDLING UNITS 116-117
Sinterflo® P Metal Powder Aeration Units
118-119
Sinterflo® MC Fluidising Media 120-121
Vyon®PorousPolymerFluidisingMedia 122-123
FLOW CONTROL UNITS 125-126
Sinterflo® MC Filter Plates 126-127
Sinterflo® P Flow Restrictors 128
BatteryVentsandFlameArrestors 129
Sinterflo® P Porous Powder Cylinders 130-131
Porous Cups and Bushings 132
Spargers 133
Vyon® Silencers 134-135
DISPOSABLE DIFFUSED AERATION UNITS 136-137
Vyon® Disc Diffusers 138
Vyon® Tubular Diffusers 139
SPECIALITY PRODUCTS 140-141
StabifilTM 142-143
AUXILIARY PRODUCTS 144-145
Differential Pressure Indicators 147
MEDIA AND MATERIALS 148-149
Metals
Sinterflo® F Metal Fibre 150
Sinterflo® P Metal Powder 151
Sinterflo® M Metal Mesh 152
Sinterflo®MCMetalMeshComposite 153
Polymers
Vyon® 154-155
BioVyonTM 156-157
ORDERING GUIDE
Sinterflo®CleanableFilterElementsandCartridges
160-162
Cartridge Filter End Cap Adapters 164-165
CartridgePre-filtersandMembraneFilters
166-167
Junior Cartridge Filters 168
FilterElementandCartridgeHousings 170-171
Metallic In-Line and Last Chance Filters 172-173
PolymericIn-LineandLastChanceFilters
174-175
Disposable Capsule Filters 176-177
INDEX
Index by Industry Application 178-188
TheCompany
76
Intr
od
uctio
nPo
rva
ir Fi
ltra
tion
Gro
up
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Porvair Filtration Group is an international leader in the developmentandsupplyofmaterialsandproductsforapplicationsinfiltrationandseparation.
PorvairmanufactureinboththeUKandUSAandhaveanextensivenetworkofsalesofficesanddistributionchannels throughout the world. Our expertise is wide and varied spanning over 50 years, with products used inmarketssuchas:
• Aerospace and Defence
• Nuclear
• Energy
• Process
• Food and Beverage
• Printing
• WaterTreatment
• Pharmaceutical
• BiosciencesandScientific
• Porous Media and Materials
Our ongoing success is based on a dedication to technicalexcellenceandsuperiorcustomerservice.Ourfuturewillbebuiltonourinvestmentinresearchanddevelopmenttoprovideinnovativenewproductsthatexceedtheexpectationsofourcustomersinsolving the challenges that they face.
Aerospace and Defence
Porvair Filtration Groupdesignsandmanufacturesspecialistfiltrationequipmenttomeettheexceptionaltechnical challenges of the aerospace and defence industry,forcontaminationcontrolandconditionmonitoringinhydraulic,fuel,lubrication,coolantandairsystems.
Ourfiltersprotectvitalsub-systemsinaircraft,helicopters,militaryvehicles,missilesandspacecraftsuchasflightcontrols,fuelmanagementandinertingsystems,thrustreversers,coolantsystems,brakingandsteering,powergenerationandairintakes.
Nuclear
Porvair Filtration Group has over 35 years experience in supplyinghighqualityfiltrationsolutionstothenuclearindustry.Workingacrossthefuelcycle,weoffersolutions to the power generation, fuel production, reprocessing,decontamination,decommissioningandwastepackagingsectors.
Energy
Porvair Filtration Groupisactiveinanumberofareasconcerning the generation and safeguarding of energy production. We are leading innovations in gasificationtechnologiestoenabletheproductionofsyntheticnaturalgas(syngasorbiogas)aspartofalternative clean energy techniques.
Process
Porvair Filtration Group supply the process industries withinnovativeandperformancedrivenfiltrationequipment(elements,cartridgesandvessels).Weprovidehighlyspecialisedfiltrationsolutionsforusethroughoutthemanufacturingprocess,offeringprovenfiltrationsolutionsfortheproductionofavastrangeofchemicalsincluding:nitricacid,maleicanhydride,ether,sulphuricacid,phosphoricacid,sodiumchlorate, solvents as well as HDPE and LLDPE.
Food and Beverage
Porvair Filtration Group’srangeoffiltersareinstalledtoeffectivelyremoveparticulates,yeast,mouldsporesandbacteriaforuseinapplicationssuchas:wineries,breweries,cider,mineralwater,softdrinks,foodanddairy,culinarysteamsterilisationandsanitisation,powder handling and sparging.
Ourproductsaremanufacturedunderstrictqualityprocess controls and are fully validated and technicallysupportedbyourqualifiedscientistsandlaboratoryservices.Ourpolymericfiltercartridges,manufacturedfromFDA-approvedmediaundercleanroomconditions,includeawiderangeofendadaptorstoenableeasyretrofittingintoneworexistingcompetitorhousingsandallmembranefiltercartridgesare 100% integrity tested during production.
Printing
InprintaistheInkjetsalesdivisionof Porvair Filtration Group. Inprinta design andmanufactureawiderangeofin-
lineandlastchancefilterstooffersolutionsforinkjetfiltrationthroughoutthebodyoftheprinter.Theseself-containedfilterassembliesareprovidedforvariedtypesofinkjetapplicationsincludingCIJcoding,textile,ceramicsandgraphics.
Microelectronics
Porvair Filtration Group offer a range of high purity gas filtrationproductstothesemiconductormarket,aswellastoOEMsuppliersinthemicroelectronicsindustry.Applications for this product range include gas safety management,exhaustventingsystems,flowcontrol,massflowcontrol,needlevalvereplacement,laminarflowdiffusing,pressuresnubbingandflamearresting.
Water Treatment
Porvair Filtration Group supply a range of diffused aerationproductsforthetreatmentofbothindustrialandmunicipaleffluent.Wealsomanufactureproductstoeliminateorganic,chemicalandotherdebristomeetstringentregulationsfordrinkingwater,aswellasforthechemical,industrial,pharmaceuticalandsciencemarkets.
Pharmaceutical
Themanufacturingofourhighperformancecost-effective products is underpinned by our quality assuranceprogramme,cGMPpracticesandcleanroomenvironmenttoensureproductsmeetthestringentrequirementsofthepharmaceutical,genericsandveterinarymedicineindustries.ApplicationsfortheseproductsincludesterilefiltrationforLVPandIV’s,sterileairforfermenterfeeds,sterileventfilters,solventextraction,veterinaryproducts,ophthalmicsolutions,sterilegrowthmediaandseraproducts.
Biosciences and Scientific
Porvair Filtration GroupmanufacturearangeofBioVyonTMsinteredporousplasticmaterialsandproductsforthebioscienceandscientificindustries.Manufacturedtocurrentgoodmanufacturingpractices(cGMP),theBioVyonTMrangeismadetodemandingregulatorystandardsasrequiredbytheWRAS, FDA and USP.
Porous Media and Materials
Porvair Filtration Groupmanufactureanextensiverangeofporousmaterialstoprovideoptimumsolutionsforawidevarietyofapplications.Thesematerialscanbe purchased for OEM products or integrated and packagedintofinishedproducts.
Our Locations
98
Intr
od
uctio
nPo
rva
ir Fi
ltra
tion
Gro
up
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Ashland, Virginia, USA
TheAshlandDivisioninVirginiaisourUSAheadoffice,aswellastheUSAmanufacturerformanyoftheindustries Porvair Filtration Group are involved with.
This includes Aerospace and Defence, Nuclear, Energy, Process, Food and Beverage, Printing, Water Treatment,Pharmaceutical,BiosciencesandScientific,Porous Media and Materials.
ISO9001:2008approved.AS9100RevCapproved.
Porvair Filtration Group Inc., Ashland Division 301 Business Lane Ashland Virginia 23005 USA
Tel: +18045501600 Email: infoUS@porvairfiltration.com
Caribou, Maine, USA
Porvair Filtration Group in Caribou, Maine, focuses on themanufactureofcustomengineeredporousmetalfibreandmetalPTFEcomponentsandassembliesforuseinawiderangeoffiltrationandflowapplications.
• ProcessandAnalyticalInstruments
• Porous Media and Materials
ISO9001:2008approved.
Porvair Filtration Group Inc., Caribou Division 15ArmcoAvenue Caribou Maine 04736 USA
Tel: +12074933027 Email: infoUS@porvairfiltration.com
Porvair Filtration Group’sheadofficeislocatedinSegensworth, UK. The following business units also operateoutofSegensworth:
• Aerospace and Defence
• Nuclear
• Energy
ISO9001:2008,AS9100RevC,EASA(Part21SubpartG)approved.
Porvair Filtration Group Ltd., Segensworth Division 1 Concorde Close Segensworth Fareham Hampshire PO15 5RT UK
Tel: +44(0)1489864330 Email: info@porvairfiltration.com
Boise, Idaho, USA
Porvair Filtration Group in Boise, Idaho, focuses on the manufactureofcustomengineeredporoussinteredmetalcomponentsandassembliesforuseinarangeofapplicationswithin:
• Solar Panel, LED and Wafer Manufacture
• Microelectronics
Porvair Filtration Group Inc., Boise Division 1226 Caldwell Boulevard Nampa Idaho 83651 USA
Tel: +12084612090 Email: infoUS@porvairfiltration.com
Segensworth, Hampshire, UK - Head Office
Xiaogan, Wuhan, China
Our Wuhan Division in China provides an operational baseformanufacturingandmarketingourextensiverangeofproductswithinAsia.Thissiteprimarilyfocusesonthefollowingindustries:
• Energy
• Food and Beverage
• WaterTreatment
• Pharmaceutical
Porvair Filtration Group, Wuhan Division Chengdong Area SquareIndustrialPark,NorthDistrict XiaonanEconomicDevelopmentZone Xiaogan, 432000 China
Tel: +86-(0)712-2878955 Email: info@porvairfiltration.com
New Milton, Hampshire, UK
OurNewMiltonDivisionishometoPorvair Filtration Group’sprocessdepartments,whichincorporate:
• Process
• Food and Beverage
• Printing
• Pharmaceutical
• Polymer
ISO9001:2008approved.
Porvair Filtration Group Ltd., New Milton Division Queensway StemLane New Milton Hampshire BH25 5NN UK
Tel: +44(0)1425612010 Email: nmsales@porvairfiltration.com
Wrexham, UK
OurWrexhamDivisionishometothemanufacturingsiteforsinteredporousplasticandmetalmaterials.ThesematerialsareusedwithintheGrouptomakefiltersprimarilyforthechemicalprocessing,gasificationand nuclear industries, as well as a wide range of other applications.
• Porous Media and Materials • BiosciencesandScientific
• WaterTreatment
ISO9001:2008approved.
Porvair Filtration Group Ltd., Wrexham Division Clywedog Road South WrexhamIndustrialEstate Wrexham LL13 9XS UK
Tel: +44(0)1978661144 Email: info@porvairfiltration.com
Engineering
Frominitialconceptdesignthroughmanufactureand validation to in-service support, our highly experiencedteamofdedicatedengineersworktodeveloptheoptimalfiltrationsolution.Ourteamutilisesthe latest engineering tools of 3D AutoCAD®, Finite ElementStressAnalysis,ComputationalFluidDynamics(CFD)andbespokepressurevesseldesignsoftware(PD5500,ASMEVIII,EN13445).Thisiscombinedwithourknowledgeandstrongethosofworkingcloselywithourcustomers,ensuringfiltrationsolutionsthatmeetcustomersrequirements.
Testing and Laboratory
Ourdedicatedtest,developmentandlaboratoryservicesunderpinourdesignanddevelopmentactivity;fromfiltrationmediaandmaterialcharacterisation,productverificationtestingtocustomersystemssimulationtrialsandinserviceperformanceevaluation.Ourcapabilitiesincludefiltrationcharacterisation,environmentaltestingandanalysis.
Technical Support Services
• Validation services:
- Processspecificvalidation
- Filtercompatibility
- Retention studies
- Microbial challenge tests
- Endotoxin and particulate testing
- Extractables testing
• On-site services:
- Customerplantsurveys
- Processfilteroptimisation
- Trouble-shooting
- Pre-inspection review
• Training:
- Integrity testing
- SIPandCIPmethods
Quality
Our policy is to provide products and services that consistentlysatisfythecommitmentsmadetoourcustomersbycomplyingwiththeirrequirements,workingtogetherasateamandbyachievingcontinualimprovementinourskills,systems,processesandperformance.
Wehaveadedicatedteamofqualityprofessionalswithmanyyearsexperienceindefinition,implementationandmaintenanceofqualitymanagementsystemsmeetingmultipleindustryrequirements.Thisextendsacrosstheworkforcethrough a strong quality culture and a philosophy of ‘gettingitrightfirsttime’drivenfromthetopoftheorganisation.
Ourqualitymanagementsystemsareregularlyauditedinternallyandbycustomersandregulatorybodies.WeholdISO9001atourmanufacturingsitesalongwith,EN9100 and EASA Part 21 Subpart G at facilities in the UK andUSA.WeareNQA1capablesubjecttospecificprojectrequirements.
Porvair Filtration Group has a policy of continuous improvementinallareasofitsbusiness.Listening tothecustomers’presentandfuturerequirements isavitalpartofouroperationsandakeypartof driving change.
Weunderstandthatproductdevelopmentinvolvesbuildingmultidisciplinaryteams,notonlywithinthecompany,butofteninpartnershipwithourcustomers.Thiscontinuousdevelopmentofproductsandmaterialsis vital, to enable us to offer new and better solutions. Porvairhasimplementedvariousmethodologiestodrive out waste and process variance across the companytoachieveourgoalofzerodefects.
Wehaveadedicatedteamofscientists,engineers,productionandqualityprofessionalsworkingtowardsthebestpossiblefiltrationsolutionsforourcustomers.We have a fully equipped test house and laboratory, and our experienced design engineers use the latest AutoCAD®technology,with3Dsolidmodelling,integratedwithfiniteelementanalysistogivefullstructural assurance capability.
Quality is at the heart of every stage of our operation andafundamentalpartofourculture.WeareISO9001approvedandholdmanyotheraccreditationsforthevarious industries we serve.
Research and Development
Developmentplaysafundamentalpartinouroperations and, as a result, we have developed a numberofcustomdesignedproductsbasedonourestablishedporouspolymericmaterials(Vyon®)andsinteredmetalmedia(Sinterflo®),aswellasdevelopingarangeoffiltersforfueltankinertingapplications.
Althoughweoperateacrossmanyfiltrationandseparationmarketsthereissignificantinteractionbetweeneachdivisionintermsofproductresearchanddevelopment.Thenewproductdevelopmentteamisdrawnfromscientistsandengineersfromacrossall divisions encouraging new ideas and new solutions. The success of this approach has been in theinteractionofchemistsandengineersworkingtogethertofindpracticalsolutionstosomeextremelycomplexscientificchallengesidentifiedinthechosenmarketareas.
Manufacturing
Porvair Filtration Group producefiltersandfiltrationsystems,aswellasarangeofporousmaterials,at production sites within the UK and the USA. Wemanufactureforawidevarietyofindustrial,pharmaceuticalandbiomedicalapplications,aswellassupplyingfiltrationsolutionsforextremeconditionsoftemperature,pressureandcorrosionfortheaerospaceandnuclearmarkets.
Ourproductioncapabilitiesincludethecompleteelementorcartridgeconstruction,alongwiththebuildofentiretubeplateandvesselassemblies.WeboastspecialistfabricationskillsandtechniquesinallofourmanufacturingsitesaroundtheworldaswellasextensiveISOcleanroomfacilities.
1110
Intr
od
uctio
nPr
od
uc
t In
no
vatio
n, M
an
ufa
ctu
ring
, Te
stin
g a
nd
Qu
alit
y
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Product Innovation, Manufacturing, Testing and Quality
13
Porvair Filtration Group manufacture a range of cleanable metallic filter cartridges and elements, which are used in the following industries:
• Aerospace and Defence
• Nuclear
• Food and Beverage
• Pharmaceutical
• Industrial Process
• ChemicalProcess
• Polymer
The robustness of design, that is provided by a fully weldedmetallicelementorcartridge,isrequiredtoresistdeteriorationinharshoperatingenvironments,includingaggressiveconditions,hightemperaturesorwhere the operating differential pressures are high.
13
Cleanable Filter Elements and Cartridges
Manufactured from randomly laid metal fibres, sinter-bonded to form a uniform high porosity filter medium, Sinterflo® F demonstrates a significantly low pressure drop, high permeability and excellent dirt holding capacity.
Moreover,sinteredmetalfibremaybepleatedtoincreasetheavailablefiltrationareaofafilterelement,thereby further increasing dirt holding capacity, minimisingmaintenanceandmaximisingon-streamprocessing.
Withthefeasibilitytoformulatemetalfibrestomeetspecificapplicationrequirements,combinedwithinherentdurability,sinteredmetalfibrefilterscanbe cleaned in situwithoutinterruptingprocessflow,therebyprovidingtheultimateinprocesseconomicsbyreducingdowntimetoaminimum.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Resistanttohightemperaturesandcorrosiveenvironments.
• Highvoidvolume.
• Excellent cleanability and dirt holding capacity.
• Minimalmaintenancecosts.
• Available in 316L as standard with other alloys such as Inconel® 601, Hastelloy® X, NiCrMo Alloy 59 and Fecralloy® on request.
Sinterflo® FCylindrical Sintered Metal FibreFilterElements
15
Sint
erfl
o® F
Cyl
ind
rica
l Sin
tere
d M
eta
l Fib
re F
ilte
r Ele
me
nts
CleanableFilterElementsandCartridges
14
Ordering Information: Fororderinginformationpleasegotopage160.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CLEANABLE FILTER ELEMENTS AND CARTRIDGESCONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Specifications
Materials of Manufacture316L stainless steel standard. Inconel®, Hastelloy®, NiCrMo Alloy 59 and Fecralloy® on request or by process selection. Additional alloys are available on request.
Element Dimensions*Diameter: 66mm (2.6”)standard
Length: 05: 125mm(5”) 10: 250mm(10”) 20: 498mm(20”) 30: 745mm(30”) 40: 1012mm(40”)
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10”)element.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coated Viton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: 15bar(218psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Sinterflo® F Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 3 1
5(0005) 5 1.5
10(0010) 10 3
15(0015) 15 4
20(0020) 20 6
30(0030) 30 8
40(0040) 40 11
60(0060) 60 16
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
200
300
Flow Rate (litres/min)
50
100
150
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
30
40
50
Flow Rate (ALPM)
10
20
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
15
10
20
30
Flow Rate (ALPM)200 10000 400 800600
25
5
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm250
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
200 1000400 800600
* Using a 10 inch element, at ambient temperature.
Manufactured from randomly laid metal fibres, sinter-bonded to form a uniform high porosity filter medium, Sinterflo® F demonstrates a significantly low pressure drop, high permeability and excellent dirt holding capacity.
Pleatedsinteredmetalfibreincreasestheavailablefiltrationareaofafilterelement,therebyfurtherincreasingdirtholdingcapacityandsominimisingmaintenanceandmaximisingon-streamprocessing.
Withthefeasibilitytoformulatemetalfibrestomeetspecificapplicationrequirementscombinedwithinherentdurability,sinteredmetalfibrefilterscanbe cleaned in situwithoutinterruptingprocessflowtherebyprovidingtheultimateinprocesseconomicsbyreducingdowntimetoaminimum.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Resistanttohightemperaturesandcorrosiveenvironments.
• Highvoidvolume.
• Excellent cleanability and dirt holding capacity.
• Minimalmaintenancecosts.
• Pleatablestructure,offeringhigherfiltrationareaper cartridge.
• Available in 316L as standard with other alloys such as Inconel® 601, Hastelloy® X, NiCrMo Alloy 59 and Fecralloy® on request.
Sinterflo® FPleated Sintered Metal Fibre Filter Cartridges
17
Sint
erfl
o® F
Ple
ate
d S
inte
red
Me
tal F
ibre
Filt
er C
art
ridg
es
CleanableFilterElementsandCartridges
16
Ordering Information: Fororderinginformationpleasegotopage160.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Specifications
Materials of Manufacture316L stainless steel standard. Inconel®, Hastelloy®, NiCrMo Alloy 59 and Fecralloy® available on request or by process selection. Additional alloys are available on request.
Cartridge Dimensions* Diameter: 66mm (2.6”)standard
Length: 05: 125mm(5”) 10: 250mm(10”) 20: 498mm(20”) 30: 745mm(30”) 40: 1012mm(40”)
* Other diameters and lengths available on request.
Effective Filtration Area0.13m2 (1.40ft2)per250mm(10”)cartridge.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coated Viton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: 25bar(363psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
100
20
140
Flow Rate (litres/min)
40
60
80
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
15
20
25
Flow Rate (ALPM)
5
10
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
8
6
10
14
Flow Rate (ALPM)200 10000 400 800600
12
4
2
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
120
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
60µm
40µm
30µm
20µm
15µm
10µm
5µm
3µm
200 1000400 800600
* Using a 10 inch cartridge, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Sinterflo® F Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 3 1
5(0005) 5 1.5
10(0010) 10 3
15(0015) 15 4
20(0020) 20 6
30(0030) 30 8
40(0040) 40 11
60(0060) 60 16
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
Primarily produced from 316L grade powder, however other stainless steel grades and powder alloys such as Inconel®, Hastelloy® and Monel® are available, depending upon the requirements of the operating conditions.
Thesematerialsofferresistancetomostchemicalsandcanbeusedintemperaturesupto1000ºC (1832°F).
Ourisostaticpressingensuresgreatermediauniformitywith no welds, leading to increased corrosion resistance.
Typical Applications
• Catalyst recovery and retention
• Polymermelt
• Chemicalproduction
• Steamfiltration
• Culinarysteam
• Processsteam
• Liquidsandliquidbackwash
Features and Benefits
• Extremelyrobustconstruction.
• Smoothsurfacefinishpreferableforbackwashapplications.
• Selfsupportingconstructioneliminatingtheneedfor additional hardware.
• Isostatic pressed, robust construction.
• Broadrangeoffixed,uniformporesizes.
• Ability to withstand varying process conditions.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, 904L stainless steel, 310 stainless steel, Inconel®, Hastelloy® and Monel® on request, as well as sinteredpowderedbronze.
Sinterflo® PCylindrical Sintered Metal PowderFilterElements
19
Sint
erfl
o® P
Cyl
ind
rica
l Sin
tere
d M
eta
l Po
wd
er F
ilte
r Ele
me
nts
CleanableFilterElementsandCartridges
18
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel®, Hastelloy®, Monel® on request or by process selection. Additional alloys are available on request.
Element Dimensions*Diameter: 66mm (2.6”)standard
Length: 05: 125mm(5”) 10: 250mm(10”) 20: 498mm(20”) 30: 745mm(30”) 40: 1012mm(40”)
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10”)element.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coated Viton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)
Normalflowdirection: 25bar(363psi)
Reverseflowdirection: 10bar(145psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Ordering Information: Fororderinginformationpleasegotopage161.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
1200
1400
Flow Rate (litres/min)
600
800
1000
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
150
200
250
Flow Rate (ALPM)
50
100
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
60
40
120
160
Flow Rate (ALPM)200 10000 400 800600
140
20
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
60µm
40µm
30µm
25µm
15µm
10µm
6µm
60µm
40µm
30µm
25µm
15µm
10µm
6µm
60µm
40µm
30µm
25µm
15µm
10µm
6µm
200 1000400 800600
400
200
100
80
Sinterflo® P Stainless Steel Media Grades
StainlessSteel MicronRating(µm) Liquids(µm)* Gases(µm) Grades (microncode) (99.9%efficiency) (99.99%efficiency)
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
S10 6(0006) 6 0.7S20 10(0010) 10 0.8S30 15(0015) 15 4S36 25(0025) 25 5S40 30(0030) 30 6S41 40(0040) 40 8S50 60(0060) 60 15
* Using a 10 inch element, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Sinterflo® M demonstrates good permeability, high tensile strength and is available from single wrap designs through to complex multi-layered structures in pleated constructions to optimise the area available. These meshes can be manufactured in diffusion bonded versions to increase performance security of pore shape and size and have the broadest range of pore sizes of any filter media type.
Sinterflo®Mprecisionwovenmeshesaremanufacturedin various types of weaves. Plain square weave is availableforsimplesievingdutiesthroughvariousweave patterns (Reverse Plain Dutch, Broad Mesh Twill andSinglePlainWeave).DutchTwillWeaveisprovidedforthemostcomprehensiveselectionofsurfacefiltrationduties.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Manufactured in various types of weaves.
• Preciseapertureinsizeandshape.
• Goodpermeability.
• All welded, robust construction.
• Availablefromsinglelayereddesignstocomplexmulti-layeredstructures.
• Availableinthebroadestrangeofporesizesofanyfiltermediatype.
• Smoothsurfacevariantpreferableforbackwashapplications.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, Inconel®, Hastelloy® and Monel® on request.
Sinterflo® MCylindrical Metal Mesh FilterElements
21
Sint
erfl
o® M
Cyl
ind
rica
l Me
tal M
esh
Filt
er E
lem
ent
s CleanableFilterElementsandCartridges
20
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel®, Hastelloy® and Monel® available on request or by process selection.
Element Dimensions*Diameter: 66mm (2.6”)standard
Length: 05: 125mm(5”) 10: 250mm(10”) 20: 498mm(20”) 30: 745mm(30”) 40: 1012mm(40”)
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10”)element.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coated Viton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: 15bar(218psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Ordering Information: Fororderinginformationpleasegotopage162.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
70
10
90
Flow Rate (litres/min)
20
30
40
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
6
8
12
Flow Rate (ALPM)
2
4
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
3
5
7
Flow Rate (ALPM)200 10000 400 800600
2
1
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
80
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
200 1000400 800600
60
50
10
6
4
Sinterflo® M Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 10 2
5(0005) 18 13
10(0010) 25 18
15(0015) 35 25
20(0020) 30 20
30(0030) 40 30
35(0035) 50 45
70(0070) 75 60
* Hard spherical particle maximum passed.
* Using a 10 inch element, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Sinterflo® M demonstrates good permeability, high tensile strength and is available from single wrap designs through to complex multi-layered structures in pleated constructions to optimise the area available. These meshes can be manufactured in diffusion bonded versions to increase performance security of pore shape and size and have the broadest range of pore sizes of any filter media type.
Sinterflo®Mprecisionwovenmeshesaremanufacturedin various types of weaves. Plain square weave is availableforsimplesievingdutiesthroughvariousweave patterns (Reverse Plain Dutch, Broad Mesh Twill andSinglePlainWeave).DutchTwillWeaveisprovidedforthemostcomprehensiveselectionofsurfacefiltrationduties.
Sinterflo® M is available in 316L stainless steel as standard with other alloys such as 304L stainless steel, Inconel® and Monel® on request.
Typical Applications
• Catalyst recovery and retention
• Gasificationandchemicalproduction
• Ventfilters
• Agrochemical
• Steamfiltration
• Culinarysteam
• Processsteam
• Pharmaceuticalpowderrecovery
• Polymermelt
Features and Benefits
• Manufactured in various types of weaves.
• Preciseapertureinsizeandshape.
• Goodpermeability.
• All welded, robust construction.
• Availablefromsinglelayereddesignstocomplexmulti-layeredstructuresinpleatedconstructionstooptimisetheareaavailable.
• Availableinthebroadestrangeofporesizesofanyfiltermediatype.
• Smoothsurfacevariantpreferableforbackwashapplications.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, Inconel®, Hastelloy® and Monel® on request.
Sinterflo® MPleated Metal Mesh Filter Cartridges
23
Sint
erfl
o® M
Ple
ate
d M
eta
l Me
sh F
ilte
r Ca
rtrid
ge
s CleanableFilterElementsandCartridges
22
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel®, Hastelloy® and Monel® on request or by process selection. Additional alloys are available on request
Cartridge Dimensions*Diameter: 66mm (2.6”)standard
Length: 05: 125mm(5”) 10: 250mm(10”) 20: 498mm(20”) 30: 745mm(30”) 40: 1012mm(40”)
* Other diameters and lengths available on request.
Effective Filtration Area0.13m2 (1.40ft2)per250mm(10”)cartridge.
Gaskets and O-Rings*EPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coated Viton® available on request or by process selection.* FDA approved seals are available.
Typical Maximum Differential Pressure* (alllengths)Normalflowdirection: Upto25bar(363psi)
Reverseflowdirection: 3bar(44psi) * Grade dependant.
Operating TemperatureMaximumcontinuous: From-195°C(-319°F)
to340°C(644°F)seallimiting. From-269°C(-452°F)to1000°C(1832°F)alloylimiting.
Ordering Information: Fororderinginformationpleasegotopage162.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Typical Flow Rates in Air*
Typical Flow Rates in Steam*
Typical Flow Rates in Water*
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
50
10
70
Flow Rate (litres/min)
20
30
40
20 60 1000 40 80
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
6
8
10
Flow Rate (ALPM)
2
4
0
0
Diff
ere
ntia
l Pre
ssur
e L
oss
(m
ba
r)
3
4
5
Flow Rate (ALPM)200 10000 400 800600
2
1
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.4
0.2
0.6
0.8
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
Flow Rate (US GPM)5 15 250 10 20
Typical Flow Rates in Air
Typical Flow Rates in Steam
Typical Flow Rates in Water
0.0
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
1.0
0.2
1.6
2.0
7µm
5µm
3µm
Flow Rate (US GPM)
0.4
0.6
0.8
1.2
1.4
1.8
5 15 250 10 20
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.10
0.02
0.12
Flow Rate (ACFM)
0.06
0.04
0.08
5 15 350 10 20 25 30
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.03
0.02
0.04
0.06
Flow Rate (ACFM)5 15 350 10 20
0.01
3025
0.05
>60µm
40µm
30µm
25µm
20µm
15µm
10µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.25
0.05
0.30
0.35
Flow Rate (ACFM)
0.15
0.10
0.20
5 15 350 10 20 25 30
7µm
5µm
3µm
0.00
Diff
ere
ntia
l Pre
ssur
e L
oss
(p
si)
0.14
0.12
0.16
0.20
Flow Rate (ACFM)5 15 350 10 20
0.08
3025
0.18
0.06
0.04
0.02
0.10
7µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
60
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
50µm
35µm
30µm
25µm
15µm
10µm
5µm
3µm
200 1000400 800600
Sinterflo® M Stainless Steel Media Grades
MicronRating(µm) Liquids(µm)* Gases(µm) (microncode) (99.9%efficiency) (99.9%efficiency)
3(0003) 10 2
5(0005) 18 13
10(0010) 25 18
15(0015) 35 25
20(0020) 30 20
30(0030) 40 30
35(0035) 50 45
70(0070) 75 60
* Hard spherical particle maximum passed.
* Using a 10 inch cartridge, at ambient temperature.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Sinterflo® MC multi-layered, diffusion-bonded stainless steel mesh is produced using a novel sintering process; it is available in both Lo Flow and Hi Flow rates, to meet your application requirements.
Thismaterialiseasilycustomengineeredtomeettherequiredspecificationofmaterials,strength,flowrequirements,thickness,micronratingandenvironment.
Dependingonatmosphericconditions,itcanbeusedintemperaturesupto540ºC(1004ºF),withintermittentoperatingpeaksupto650ºC(1202ºF).
Primarilymadefrom316Lstainlesssteel,itisalsoavailable in Inconel®, Hastelloy® and Monel®materialsforuseinthemostaggressiveenvironments.
Typical Applications
• Liquid applications
• Steamfiltration
• Culinarysteam
• Processsteam
Features and Benefits
• Asuperior,mechanicallystrongstructure.
• Fabricated shapes without expensive support structuresorjoiningstrips.
• Can be reused as the structure allows repeated cleaning,providinganeconomicalchoice.
• Non-sheddingmediathatprovidesresistancetomechanicalabrasion.
• Resistancetomostchemicals.
Sinterflo® MCMetalCompositeFilterCartridges
25
Sint
erfl
o® M
C M
eta
l Co
mp
osi
te F
ilte
r Ca
rtrid
ge
s CleanableFilterElementsandCartridges
24
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Specifications
Materials of Manufacture316L stainless steel standard. 304L stainless steel, Inconel® 600, Hastelloy® X and Monel® available on request or by process selection.
Cartridge Dimensions*Diameter*: 66mm (2.6”)standard
Length*: 05: 125mm(5”) 10: 250mm(10”) 20: 498mm(20”) 30: 745mm(30”) 40: 1012mm(40”)
* Other diameters and lengths available on request.
Effective Filtration Area0.05m2 (0.55ft2)per250mm(10”)cartridge.
Gaskets and O-RingsEPDMasstandard.Chemraz®, nitrile, PTFE, silicone, Viton®, FEP coated EPDM, FEP coated silicone, FEP coated Viton® available on request or by process selection.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Stainless Steel Media Grades
Liquids(µm) Gases(µm)
* Single Pass Efficiency Test in accordance with ASTM795 ACFTD.
5 3.5
8 6
10 8
15 13
20 16
30 20
35 22
70 55
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Porvair Filtration Group’s candle filters are available in both cylindrical and pleated formats, in industry standard designs, or can be custom designed to fit any particular housing. These are available in both sintered metal fibre and woven wire mesh.
Availableinfiltrationratingsfrom3to100microns,ourcandlefiltersarenormallysuppliedwithanouterguard,bothtoprotectthemediaandtoallowreverseflowduringcleaning.Ourcandlesarereadilycleanable with current technology.
Allcandlesareprovidedwithinternalvolumereducestoavoidstagnantflowregionswithinthecandledesign.Flowdiverterfeatureswithinthevolumereducer provide good distribution over the candles as thepolymerentersthehousing.
Usingourrangeofhighstrength,highlypermeablestainlesssteelfibremedia,resultsincandlefilterswithlowinitialpressuredropsandlongon-streamlife.
Typical Applications
• Polyester bottle chip
• Polyesterfibre
• Celluloseacetatefibre
• Nylon6and66fibre
Features and Benefits
• Proven robustness for cleaning and repeat use. • Longfilterlife.
• Operateinhightemperatureenvironments.
• High carbon resistance.
• Highfiltrationareaforpleatedcandleversion.
Candle FiltersforthePolymerMeltIndustry
27
Ca
ndle
Filt
ers
for t
he P
oly
me
r Me
lt In
dus
try
CleanableFilterElementsandCartridges
26
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Porvair Filtration Group’s RempakTM candle filters are manufactured with removable hardware fittings, and replaceable media, resulting in lower operating costs.
These are available in both cylindrical and pleated formats,inindustrystandarddesigns,orcanbecustomdesignedtofitanyparticularhousing.Theseareavailableinbothsinteredmetalfibreandwovenwiremesh.
Allcandlesareprovidedwithinternalvolumereducerstoavoidstagnantflowregionswithinthecandledesign.Flowdiverterfeatureswithinthevolumereducer provide good distribution over the candles as thepolymerentersthehousing.
Typical Applications
• Polyester bottle chip
• Polyesterfibre
• Celluloseacetatefibre
• Nylon6and66fibre
Features and Benefits
• Proven robustness for cleaning and repeat use. • Longfilterlife.
• Operateinhightemperatureenvironments.
• High carbon resistance.
RempakTM Candle FiltersforthePolymerMeltIndustry
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
Porvair Filtration Group manufacture a range of pleated filter elements for the aerospace and defence industries. These are used tor critical contamination control in a variety of aircraft systems.
Thefiltermediaforpleatedelementscanbepolymeric,glassfibreorsinteredmetalfibreusedincombinationwithavarietyofsupportanddrainmeshestooptimisecostandperformance.Typicalabsolutefiltrationratingsare5,10,15and25micronwith a Beta ratio greater than 200.
Sinterflo® M Sintered Metal MeshOurSinterflo®Mmetalmeshpleatedfiltersdemonstrategoodpermeability,hightensilestrengthandareavailableincomplexmulti-layeredstructures.
Thesefiltersarecleanableunderspecificconditions,whichcanbedefinedbyamemberofPorvair FIltration Group’sSalesTeam.
Porvair Filtration Group also supply a range of sinteredmetalfibre,glassfibre,polymericorresin-impregnatedcellulosepleatedelements,formoreinformationpleaserefertopage37.
Typical Applications
• Hydraulic
• Lubricant
• Coolant
• Fuel
• Air
• Environmentalcontrol
Features and Benefits
• Highfiltrationefficiency. • Lightweight.
• Enhanced operating life.
Filter Assemblies
Porvairmanufacturesfilterassembliesforhydraulic,fuel,lubricationandairsystems.Applicationsinclude:
• Hydraulic pressure, return and case drain.
• Thrustreverseractuationsystems.
• FuelsupplyforbothmainengineandAPU’s.
• Fuelinertingsystems.
• Gearbox lubrication.
2928
CONTENTS INDEXORDERING INFORMATION
Pleated Filter ElementsFor the Aerospace Industry
PRODUCTSINTRODUCTION
Ple
ate
d F
ilte
r Ele
me
nts
for t
he A
ero
spa
ce
Ind
ustr
yCleanableFilterElementsandCartridges
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CLEANABLE FILTER ELEMENTS AND CARTRIDGES
31
Leaf disc and solid plate filters are designed for critical hot melt polymer filtration applications such as the manufacture of PET packaging film, PEEK chip and film.
Thesefiltersaredesignedtoachievegreatergelcontrolbyprovidingsmootherflowandthereforegreatergelretentiononthefilter.
Inadditiontoofferingawiderangeoffiltermedia,Porvair’s leafdiscfiltersofferthelatestdesignfeatures,ensuring lower pressure drops leading to longer on streamlife.Therobustconstructionallowsformanycleaning cycles, reducing whole life costs.
With our wide experience and our broad range of filtermedia,ourapplicationanddesignengineerscancustomdesignoptimumfiltrationproductsforeachproductandprocess;thisincludessupportduring the design process in order to achieve on-line performance.
Our technical laboratory services include facilities wherewecancharacteriseourmediaandelements’performancebytheuseofflowtests,porosimetry,microscopy,chemicalanalysis,tensiletesting,metallographyandthequantificationofpolymercontaminantwithimageanalysis.
31
Leaf Disc and Solid Plate Filters
Porvair Filtration Group manufacture a range of stainless steel fibre and powder leaf disc filters for use within the polymer melt industry.
Stackeddisccapsulesarepreferredwhenlowresidencetimeanduniformflowareimportant,andwhere degradation is a concern. Capsules also produceasingulardownstreamflowpathwhicheliminatestheneedformixerstopreventflowlinesinfinishedfilm.
Capsulesareavailablewithdiametersof178mm(7″),254mm(10″)and305mm(12″),allindustrystandardhubdesignsanddimensions,withoptionallooseorweldedspiders.Awiderangeofefficienciesareavailableincluding3to40micronsinsinteredsteelfibremediaand10to40micronsinsinteredsteelpowdermediausingstainlessorspecialitysteels.
Thestainlesssteelfibremediafiltershavethefollowingfeaturesandbenefits:
• Photo etched plate support Thenon-perforatededgeimprovesweldingstrength at the edge of the disc, increasing the strengthandrigidityofthefilter.
• Mesh separator Precision316LalloystainlesssteelmeshIncreasestheoverallstrengthandrigidityofthefilter.
• Advanced hard hub Maximumstrengthand35%moreopenarea,reducingpressuredropwithoutcompromisingdisc strength.
Typical Applications
• Polyesterfilm
• PEEKmaterial
Features and Benefits
• Optimumstrengthandperformance.
• Readily cleanable.
• Longon-streamlife.
• Constantporesizedistributionduringmanufacture.
Specifications
Materials of Manufacture304L / 316L stainless steel standard.
Method of ConstructionFusion welded.
Method of SealingMetalfibregasket.
Dimensions305mm(12”)x63.5mm(2.5”) 305mm(12”)x85.1mm(3.35”) 178mm(7”)x47.75mm(1.88”)
Minimum Differential Pressure300bar(4351psi)at350°C(662°F)
Operating TemperatureMaximumcontinuous:upto400°C(752°F)
Disc Stack Sealing Load8tonnemaximum.
Leaf Disc FiltersForthePolymerMeltIndustry
33
Lea
f Dis
c F
ilte
rs fo
r the
Po
lym
er M
elt
Ind
ustr
y Le
af D
isc a
nd
So
lid P
late
Filt
ers
32
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Porvair Filtration Group manufacture solid plate leaf disc filters for use within the polymer melt industry.
Oursolidplatecapsulefilterisdesignedforhighperformancefilmandfibreproduction,witharuggedconstruction offering increased strength and durability andminimalresidencetime.
Thesolidplategreatlyimprovestheappearanceandperformanceofthinfilmproductsandlimitsthecreationofgelsanddegradedpolymerathightemperatures.
WithPrologtracking,eachfilterisuniquelyidentifiedandcertifiedbyweightandbubblepointatmanufacturetoallowforpreciseverificationofthecleaning process.
Typical Applications
• Polycarbonatefilms
Features and Benefits
• Easy to clean.
• Inherent strength.
• Low interference drainage channels.
• Nofiltersupportmaterialrequired.
• Can be re-clothed.
• Lowresidencetime.
Solid Plate Leaf Disc FiltersForthePolymerMeltIndustry
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
LEAF DISC AND SOLID PLATE FILTERS
35
Porvair Filtration Group manufacture a range of disposable polymeric filters for use within the following industries:
BiopharmaceuticalOurdisposablepolymericcartridgefiltersareconstructedfromFDAapprovedmaterialscarryingtheCFR21numberforbiologicalsafetyandourmaterialsofconstructionmeetUSPClassVI-121°Cplastics.Designedandmanufacturedforrobustness,oursterilisinggradepolymericmembranefiltersarefullyvalidatedprovidingretentionof>107colonyformingunitspersquarecentimetreofeffectivefiltrationareaas stipulated by PDA Technical Reports 26 and 40.
Food and BeverageOurrangeoffiltersareinstalledtoeffectivelyremoveparticulates,yeast,mouldsporesandbacteriaforuseinwineries,breweries,cider,mineralwater,softdrinks,foodanddairyproducts,culinarysteam,powderhandling and sparging applications.
Industrial and Chemical ProcessOurfilterrangecanbeusedinprocessapplicationssuchasspecialistinks,UVcurableinks,laminates,coatingsandlacquers,electronicsgradechemicals,watertreatment,carbonfibreprecursor,paint,partswashing,powderhandlingandtransmission,cosmeticsand toiletries.
PrintingInprinta’sextendedrangeoffiltersofferssolutionsforinkjetrequirementsincludingcapsule,in-line,lastchance,andbulkinkfiltration.
35
Disposable Filter Elements and Cartridges
Porvair Filtration Group manufacture a range of pleated filter elements for the aerospace and defence industries. These are used tor critical contamination control in a variety of aircraft systems.
Thefiltermediafordisposablepleatedelementscanbepolymeric,glassfibreorsinteredmetalfibreusedincombinationwithavarietyofsupportanddrainmeshestooptimisecostandperformance.Typicalabsolutefiltrationratingsare5,10,15and25micronwith a Beta ratio greater than 200.
Polymeric or Resin-Impregnated Cellulose Moderate dirt-holding capacity and lightweight. Offer a cost-effective solution for low pressure and temperaturefuelfiltration.
Glass FibreReduced pressure drop, increased dirt-holding capacity and can withstand greater pressures and temperaturesthancellulosefilters.
Sinterflo® F Sintered Metal FibreOurSinterflo®Fsinteredmetalfibrefiltersofferunparalleledperformanceandcanwithstandextremesoftemperatureandpressure.Studiesindicateasuperiorresistancetothedownstreamdepositofcontaminationandmaintainingintegrityduringdynamicflowconditions.
Porvair Filtration Group also supply a range of sintered metalmeshpleatedelements,formoreinformationplease refer to page 28.
Typical Applications
• Hydraulic
• Lubricant
• Coolant
• Fuel
• Air
• Environmentalcontrol
Features and Benefits
• Highfiltrationefficiency. • Lightweight.
• Enhanced operating life.
Filter Assemblies
Porvairmanufacturesfilterassembliesforhydraulic,fuel,lubricationandairsystems.Applicationsinclude:
• Hydraulic pressure, return and case drain.
• Thrustreverseractuationsystems.
• FuelsupplyforbothmainengineandAPU’s.
• Fuelinertingsystems.
• Gearbox lubrication.
3736
CONTENTS INDEXORDERING INFORMATION
Pleated Filter Elements For the Aerospace Industry
PRODUCTSINTRODUCTION
Ple
ate
d F
ilte
r Ele
me
nts
for t
he A
ero
spa
ce
Ind
ustr
yDisp
osableFilterElementsandCartridges
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Activated Carbon, a porous substance with strong physical adsorbtion properties, has the highest volume of adsorbing porosity of any material known.
By carbonisation and activation, activated carbon canbemadefrommanysubstancescontaininghighcarboncontentsuchascoal,wood,bambooandcoconut shells.
Activatedcarbonfiltersarewidelyappliedinindustrialprocessandciviluseasthemostefficientmethodofremovingodours,chlorine,volatileorganiccompounds(VOC),colours,tastesandothercontaminantsfromfluids.
ThePorvairCarbofilTM series is the new generation of carbon cartridges produced by the extrusion process. They provide long service life and superior adsorptionperformancecomparedtoconventionalgranular activated carbon cartridges together with minimumfines.Withahighmechanicalstrengthandlowashcontent,thecarbonblockstructurepreventschannelling,bypassing,fluidizingorunloadingofcarbonfines.
Topreventprematureblockingoftheactivatedcarbonlayer,theCarbofilTMfiltersincorporateaneffectivepre-filtrationlayerdesignedtointerceptgelsand large particles.
TheCarbofilTMseriesactivatedcarbonfiltercartridgesusepremiumgradecoconutshellextrudedcarbonblocksandcanbesuppliedinanylengthandendcapconfiguration,tomeettherequirementsoftheprocessapplication.
Typical Applications
• PCB solutions
• Plating and coating solutions
• Industrialwatertreatment
• Drinkingwatertreatment
• ChlorineandVOCremoval
• Tastes,odoursandorganicpigments
• Chlorinatedcompoundsreduction
• Oilsandaromaticcompoundsremoval
Features and Benefits
• Safe handling without any loose powder.
• Sanitaryinstallationandremoval.
• Fitsintoavarietyofstandardfilterhousings.
• Rapid and high capacity adsorption of contaminants.
CarbofilTMActive Carbon Cartridges
39
Ca
rbo
filTM
Ac
tive
Ca
rbo
n C
art
ridg
es
Disp
osableFilterElementsandCartridges
38
Specifications
Materials of ManufactureFiltermedia: PACimpregnatedcellulose
Netting: Polyethylene
Reinforcementbacking: Cellulosepolyester
Core: Polypropylene
Outersupport: Polypropylene
Endcaps: Polypropylene
Cartridge Dimensions (Nominal)Outsidediameter: 70mm(2.8”)
Insidediameter: 27mm(1.1")
Length: 254mm(10”) 508mm(20”) 762mm(30”) 1016mm(40”)
Gaskets and O-RingsEthylene Propylene.
Operating TemperatureFrom40ºF(4ºC)to125ºF(52ºC)
Cartridge Performance
Additional InformationTheCarbofilTMcartridgewillcontainaverysmallamountofcarbonfines(veryfineblackpowder)andanewcartridgeafterinstallationshouldbeflushedwithsufficientwatertoremovetracesofthefinesfromyourwatersystembeforeusingthewater.Itisrecommendedthatyourun(flush)foratleast20seconds prior to using water.
Estimatedcapacitytestedatgivenflowrateusing2ppmfreeavailablechlorineatcontinuousflowtowithgreaterthan90%reduction.Increasedflowratesmayresult in less effective chlorine reduction.
Micronratingsarebasedon85%removalofgivenparticlesize.
Ordering Information: Fororderinginformationpleasegotopage166.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
WARNING
Fordrinkingwaterapplications,donotusewithwaterthatismicrobiologicallyunsafeorofunknownquality without adequate disinfection before or afterthesystem.
Filter Code Cartridge Length Micron Rating Initial ∆p (psi) Chlorine Reduction (mm) (µm) @flowratelpm @flowratelpm
CR05-N1 250mm(10") 5 1.4psi@4lpm >23,000litres@4lpm
CR05-N2 508mm(20") 5 1.5psi@8lpm >46,000litres@8lpm
CR05-N3 762mm(30") 5 1.5psi@15lpm >69,000litres@15lpm
CR05-N4 1016mm(40") 5 1.5psi@20lpm >92,000litres@20lpm
CryptofilTM filter cartridges are utilised for the control of Cryptosporidium oocysts in water used in the food, beverage and ultrapure water industries.
TheCryptofilTM cartridge has been developed after extensiveresearchandhasresultedinfiltermediawithcontinuouslygradedfibredensity.Thisyieldsprogressivelyfineroocystretentionthroughthedepthofthemedia.
Thisgradeddensitydepthfiltrationmechanism,combinedwithoptimisedpleatedpackconfigurationandresultanthighsurfacearea,affordshighflowcapability and exceptional oocyst retention capacity.
Cryptosporidiumoocystsremovedfromthewaterflowarecapturedwithinthemediaandarenotsubjecttoreleasebysystemfluctuations.ThevoidsvolumeofCryptofilTMcombinedwithadvancedcartridgeconstructionresultsinafiltercapableofretaininghighconcentrations of oocysts ensuring extended service lifeandreducedfiltrationcosts.
Typical Applications
• Mineral water
• Food processing
• Embarkationwatersupply
• Leisure
Features and Benefits
• Gradedmulti-layermedia.
• Guaranteedremovalratings.
• Highfiltrationarea.
• Cartridge integrity and low TOC levels.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
CryptofilTMFortheRemovalofCryptosporidiumOocysts
41
Cry
pto
filTM
Pre
-Filt
er C
art
ridg
es
Disp
osableFilterElementsandCartridges
40
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 508mm(20”) 2modules: 762mm(30”)
1016mm(40”)
Effective Filtration AreaUpto0.6m2per250mmmodule.
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogenfreewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam60x30minutecyclesat130°C(266°F). Hotwater200x20minutecyclesat80°C(176°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe CryptofilTM Validation Guide.
Integrity TestingEachCryptofilTMmoduleofeverycartridgeisindividually integrity tested using the Bubble Point Test. ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)CryptofilTM single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
250
50
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
100
150
200
Ordering Information: Fororderinginformationpleasegotopage166.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of absolute rated cartridge filters from Porvair Filtration Group, featuring the latest developments in meltblown polypropylene filter media technology, KlearfilTM cartridges are based on a robust all polypropylene construction, offering removal ratings from 0.5 to 75 micron absolute.
Thecombinationofuptoeightseparatefiltrationlayersprovidestruedepthfiltration,withinapleatedcartridge construction. This design will reduce fouling of thefiltersurfaceareacausedbyabroadspectrumofcontaminants.
KlearfilTMcartridgesareideallysuitedforthefiltrationofprocessfluids,thatcontaincontaminantswithawiderangeofparticlesizes.
Thegradedmulti-layerpolypropylenemediaprovidespre-filtrationoftheprocessfluidpriortotheabsoluteratedfinallayer.TheuniquedesignoftheKlearfilTM cartridges helps to achieve lower running costs and a smallerprocessfootprint.
TheKlearfilTM are also highly resistant to integrity failure causedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Pharmaceuticalsandbioprocessing
• Foods and beverages
• Processwatersystems
• Finechemicals
•Cosmetics
KlearfilTMcartridgescanalsobeusedaspre-filtersorfinalfiltersinbulkinkjetfiltration;suitableformanufacturewithallmajorinktypes:
• Aqueous
• UV
• Solvent
• Dye
• Pigment
Features and Benefits
• Gradedmulti-layermedia.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
KlearfilTM Absolute Rated Pleated Depth Filters
43
Kle
arfi
lTM P
re-F
ilte
r Ca
rtrid
ge
s Disp
osableFilterElementsandCartridges
42
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module(short): 125mm(5”) 1module: 254mm(10”), 508mm(20”) 2modules: 762mm(30”), 1016mm(40”)
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam80x30minutecyclesat135°C(275°F). Hotwater200x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe KlearfilTM Validation Guide.
Integrity TestingKlearfilTMfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)KlearfilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
600
200
100
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
300
500
400
K02
K01
KP5
20
10
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
30
50
40
K15
K10
K05
K03
K20
Ordering Information: Fororderinginformationpleasegotopage166.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of absolute rated cartridge filters from Porvair Filtration Group, featuring the latest developments in borosilicate glass fibre filter media technology, MicrofilTM cartridges are constructed from robust glass fibre and polypropylene filtration layers, offering removal ratings from 0.5 to 5 micron absolute.
MicrofilTMcartridgesaresuitableforabsoluteremovalofunwantedparticulatesandforpre-filtrationtomembranefilters.
TheMicrofilTM cartridges incorporate a polypropylene pre-filtrationlayer,combinedwithahighdirtcapacityglassfibremedia.Thishastheeffectoflongerservicelife,improvedoperatingcostsandsmallerprocessfootprint.
TheMicrofilTMfiltercartridgesarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Foods and beverages
• Processwatersystems
• Pharmaceuticalsandbioprocessing
• Finechemicals
•Cosmetics
Features and Benefits
• Zetapotential.
• Highfiltrationarea. • Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• ResistancetoCleaning-In-Place(CIP)regimes.
• Full traceability.
• Controlledmanufacturingenvironment.
MicrofilTMAbsolute Rated Pleated Glass Fibre Cartridge Filters
45
Mic
rofil
TM P
re-F
ilte
r Ca
rtrid
ge
s Disp
osableFilterElementsandCartridges
44
Specifications
Materials of ManufactureFiltermedia: Glassfibre
Pre-filtrationlayer: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8")
Length: 1module(short): 125mm(5") 1module: 254mm(10"), 508mm(20") 2modules: 762mm(30"), 1016mm(40")
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam20x30minutecyclesat130°C(266°F). Hotwater200x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe MicrofilTM Validation Guide.
Integrity TestingMicrofilTMfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)MicrofilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
80
40
20
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
60
MO2
MO5
MO1
MP8
25
MP5
70
50
30
10
Ordering Information: Fororderinginformationpleasegotopage166.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
AbsoluteRemoval EffectiveFiltrationArea Rating (each254mm(10")module)
0.5, 0.8, 1.0, 2.0 and5.0µm 0.4m2 (4.4ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of absolute rated cartridge filters from Porvair Filtration Group, featuring the latest developments in meltblown polypropylene filter media technology, Polyfil™ II cartridges are based on a robust all polypropylene construction, offering removal ratings from 0.5 to 105 micron absolute.
PolyfilTMIIcartridgesaresuitableforabsoluteremovalofunwantedparticulatesandforpre-filtrationtomembranefilters.
Thegradedmulti-layerpolypropylenemediaprovidepre-filtrationoftheprocessfluidpriortotheabsoluteratedfinallayer.TheuniquedesignofthePolyfilTM II cartridges helps to achieve lower running costs and a smallerprocessfootprint.
ThePolyfilTM II are also highly resistant to integrity failure causedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Pharmaceuticalsandbioprocessing
• Foods and beverages
• Inksandcoatings
• Finechemicals
•Cosmetics
• Processwatersystems
Features and Benefits
• Gradedmulti-layermedia.
• Highfiltrationarea. • Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
PolyfilTM II Absolute Rated Pleated Polypropylene Cartridge Filters
47
Poly
filTM
II P
re-F
ilte
r Ca
rtrid
ge
sDisp
osableFilterElementsandCartridges
46
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module(short): 125mm(5”) 1module: 254mm(10”), 508mm(20”) 2modules: 762mm(30”), 1016mm(40”)
Effective Filtration AreaUpto0.6m2per250mmmodule(dependingonporerating).
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton®, Nitrile or Polypropylene felt.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30lb/in2) 80°C(176°F): 1.0bar(15lb/in2) 100°C(212°F): 0.5bar(7lb/in2)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam80x30minutecyclesat135°C(275°F). Hotwater200x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe PolyfilTM II Validation Guide.
Integrity TestingPolyfilTMIIfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)PolyfilTM II single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10 25
3µm
2µm
1µm
16
8
4
12
20
24
P07
P05
P03
P02
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10 25
P15
P10
16
8
4
12
20
24
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10 25
P60
P40
P30
P20
P90
8
4
2
6
10
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
P07
P05
P03
30
20
10
40
50
P02
P01
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
P30
P20
P15
10
5
15
20
P10
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
P90
P60
P40
3
2
1
4
5
05 15 20
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
PP8
PP5
400
200
600
800
Ordering Information: Fororderinginformationpleasegotopage166.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
TekfilTM is a high flow, graded depth filter with high contaminant capacity for long life. Constructed from FDA approved polypropylene with excellent performance characteristics, it is an economic choice for a wide range of applications.
TekfilTM is available in a range of industrial standard lengthsaseitherabsoluteornominalratedcartridges.AlsoavailableinNylonconstructionforsolventfiltration.
Typical Applications
• Foods and beverages
• Pharmaceuticals
• Finechemicalsandsolvents
• Coatings
• Photographicchemicals
• Metalfinishingelectroplating
• Watertreatmentpriortoreverseosmosis
• Cosmeticsproductfilling
TekfilTMcartridgescanalsobeusedaspre-filtersorfinalfiltersinbulkinkjetfiltration;suitableformanufacturewithallmajorinktypes:
• Aqueous
• UV
• Solvent
• Dye
• Pigment
Features and Benefits
• Gradeddepthmedia.
• Highdegreeofchemicalcompatibility.
• Absoluteandnominalremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
TekfilTM Polypropylene Depth Cartridge Filters
49
Tekfi
lTM P
re-F
ilte
r Ca
rtrid
ge
sDisp
osableFilterElementsandCartridges
48
Specifications
Materials of ManufactureFiltermedia: Polypropylene/nylon
Endfittings: Polypropylene
Cartridge Dimensions (Nominal)Diameter: 63mm(2.5”)
Length: 254mm(10”), 508mm(20”) 762mm(30”), 1016mm(40”)
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton®, NitrileorPolypropylenefeltavailablefornon-crush-fitend adapters.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 3.5bar(51psi) 60°C(140°F): 1.0bar(15psi) 80°C(176°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
ExtractablesMinimumtotalextractables.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10")TekfilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Ordering Information: Fororderinginformationpleasegotopage166.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
05 15 20
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
TN20 (Nominal)
TN10 (Nominal)
TN05 (Nominal)
30
20
10
40
50
TN01 (Nominal)
010 30 40
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 20
TA90 (Absolute)
300
200
400
500
100
TA10 (Absolute)
TA05 (Absolute)
TA03 (Absolute)
TA20 (Absolute)
TA12 (Absolute)
TA01 (Absolute)
TAP5 (Absolute)
010 30 40
Pre
ssur
e D
rop
(kg
/cm
2 )
Water Flow (l/min)
0 20
TA90 (Absolute)
0.3
0.2
0.4
0.5
0.1
TA10 (Absolute)
TA05 (Absolute)
TA03 (Absolute)
TA20 (Absolute)
TA12 (Absolute)
TA01 (Absolute)
TAP5 (Absolute)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
The Trapfil™ filter from Porvair Filtration Group has been specifically developed for the retention of diatomite and polyvinylpolypyrrolidone (PVPP) particles. It is manufactured from materials which are 100% FDA (Food and Drug Administration) approved and fully welded for strength and integrity.
TheallpolypropyleneconstructionenablestheTrapfilTM filtertoberesistanttohotcausticsolutionandstandardCIPpractices.Itisalsocompatiblewithsteamandhotwater sanitising procedures.
Designedtobebackflushed in situtoremovediatomiteandPVPPparticles.TheTrapfilTMfilterhasbeenindustryproventowithstandupto100backflushcycleswithhotcausticsolutionat70-80ºC(158-176ºF).ThisbackflushingprocesswillregeneratetheTrapfilTMfilterprovidingtheenduserwithimprovedeconomics.
TheTrapfilTMfilterisavailableinavarietyoflengthsandindustrystandardadaptors.TrapfilTM cartridges are availablein5,10and15micronratings,validatedatBeta 5000.
EachTrapfilTMfiltercarriesauniqueserialnumbertoenablefulltraceabilityofmaterialcomponents.
Typical Applications
• Stabilisation
• Clarification
Features and Benefits
• Backflushing.
• Chemicalregeneration.
• Suitableforsteamandhotwatersanitisation.
• Guaranteedremovalratings.
• Full traceability.
• Controlledmanufacturingenvironment.
TrapfilTM Polypropylene Guard Filters for Clear, Bright Beverages
51
Tra
pfil
TM P
re-F
ilte
r Ca
rtrid
ge
s Disp
osableFilterElementsandCartridges
50
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”), 508mm(20”) 2modules: 762mm(30”), 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam100x30minutecyclesat125°C(257°F). Hotwater250x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe TrapfilTM Validation Guide.
Integrity TestingTrapfilTMfiltercartridgesarebatchtestedforintegrityusing the Bubble Point Test. Procedural details are availablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)TrapfilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Ordering Information: Fororderinginformationpleasegotopage166.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
AbsoluteRemoval EffectiveFiltrationArea Rating (each254mm(10")module)
5,10and15µm 0.53m2 (5.7ft2)
30
10
5
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
0 10
15
25
20
R15
R10
R05
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of cartridge filters from Porvair Filtration Group, featuring the latest developments in membrane technology, Aquafil™ cartridges are based on a naturally hydrophilic polyethersulphone membrane with a mirrored asymmetric pore structure. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the polyethersulphone membrane provides a high strength, long life cartridge.
AquafilTMcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatAquafilTM cartridges are suited toretentiondownto0.2micronratings.AquafilTM cartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
AquafilTMcartridgesbenefitfromthelownon-specificprotein binding characteristics of polyethersulphone membranes.Theyarealsoresistanttosteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.Furthermore,sincetheywillnothydrolyse,AquafilTM cartridges are ideal for use in ultra purewatersupplysystems(18MΩ.cm).
Asaconsequence,AquafilTM cartridges provide acombinationoffeaturesandbenefitsuntilnowunavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Pure water supply
• Biopharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Finechemicals
• Beverages
Features and Benefits
• Removalratings
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
AquafilTM Single Layer Polyethersulphone MembraneCartridgeFilters
53
Aq
uafil
TM M
em
bra
ne C
art
ridg
e F
ilte
rs
Disp
osableFilterElementsandCartridges
52
Specifications
Materials of ManufactureFiltermembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 60°C(140°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)AquafilTM single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
PoreSizeRating EffectiveFiltrationArea (each254mm(10")module)
0.2, 0.45, 0.65and1.2µm 0.69m2 (7.4ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
600
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 A65
A120
A45
A20
A range of microbially rated cartridge filters from Porvair Filtration Group, featuring the latest developments in membrane technology, Biofil™ II cartridges are based on a naturally hydrophilic polyethersulphone (PES) membrane with a mirrored asymmetric pore structure. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the polyethersulphone membrane provides a high strength, long life cartridge of consistently precise microbial retention.
BiofilTMIIcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatBiofilTM II cartridges are also very suited to critical particle control down to 0.04 micronratings.BiofilTMIIcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
BiofilTMIIcartridgesbenefitfromthelownon-specificprotein binding characteristics of polyethersulphone membranes.Theyarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.Furthermore,sincetheywillnothydrolyse,BiofilTM II cartridges are idealforuseinultrapurewatersupplysystems(18MΩ.cm).
Asaconsequence,BiofilTM II cartridges provide a combinationoffeaturesandbenefitsbeforenowunavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,bioburdenreductionandtheclarificationofawide range of process liquids and end products.
Typical Applications
• Biopharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Finechemicals
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
BiofilTM II Polyethersulphone MembraneCartridgeFilters
55
Bio
filTM
II M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
54
Specifications
Materials of ManufactureFiltermembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8")
Length: 1module: BiofilTM II Junior 1module: 254mm(10") 2modules: 508mm(20") 3modules: 762mm(30") 4modules: 1016mm(40")
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat90°C(194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe BiofilTM II Validation Guide.
Integrity TestingEachBiofilTMIImoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)BiofilTM II single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.04, 0.1, 0.2, 0.45, 0.65and1.2µm 0.69m2 (7.4ft2)
500
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
300
100
500
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
300
100
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
The Porvair Filtration Group Biofil™ Plus microbial rated cartridge has been developed and manufactured for the filtration of liquids within the pharmaceutical, biotechnology and other critical applications.
BiofilTM Plus utilises a naturally hydrophilic polyethersulphone(PES)membranewithamirroredasymmetricporestructure.Thecartridge’suniquebuiltinpre-filtrationmembranelayerprovideslongerlifeand higher throughput.
Whencombinedwithqualityall-polypropylenecomponentsandhighintegritymanufacturingtechniques,theBiofil™Plusfiltercartridgeisideallysuitedtothemostdemandingprocessconditions.
Porvair’sBiofilTM Plus cartridges are constructed in a cleanroomundertightlycontrolledconditionsusingadvanced,highlyspecialisedmachinery.Qualityandconsistency of product is assured by the quality control andmanufacturingprocedures,whichareinplacethroughoutallstagesofmanufacture.
BiofilTMPlusmembranecartridgesare100%integritytestedduringmanufacturebytheforwardflowdiffusiontestmethod.
Typical Applications
• Biopharmaceuticals
• Fermentation
• Ophthalmicsolutions
• API’s
• LVP’s
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
BiofilTM Plus Double Layer Polyethersulphone MembraneCartridgeFilters
57
Bio
filTM
Plu
s M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
56
Specifications
Materials of ManufacturePre-filtermembrane: Polyethersulphone
Finalmembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: BiofilTM Plus Junior 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe BiofilTM Plus Validation Guide.
Integrity TestingEachBiofilTMPlusmoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)BiofilTM Plus single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
500
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
300
100
180
100
20
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
BT10
100
80
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 1025
60
BT04 BT65
BT120
BT45
BT20
80
40
60
160
120
140
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2, 0.45 and 0.65µm 0.48m2 (5.2ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Chemifil™ cartridges are manufactured using a polypropylene membrane of uniform thickness and high voids, with a homogeneous structure and controlled pore size.
Designedfortheremovalofsub-micronorganicandinorganicparticulatematter,theinherentstructuralstabilityofthemembraneeliminatesanyriskofmediamigrationandminimisesthereleaseofparticles.
Forsolventandaggressivechemicalfiltrationapplications,ChemifilTM cartridges offer a wide range ofchemicalcompatibility.Suitableforthemostdemandingmicrofiltrationapplications,thecartridgescanbeusedforthefiltrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
ChemifilTM cartridges can also be used for a wide range ofsterileventingandgasfiltrationapplications.
Typical Applications
• Finechemicalsandsolvents
• Photoresists and developers
• Purewatersupplysystems
• Sterile process gases
• Sterile vents
Features and Benefits
• Guaranteedmicrobialratings.
• FlowΔPcharacteristics.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Solventsandaggressivechemicals.
• Full traceability.
• Controlledmanufacturingenvironment.
ChemifilTM Polypropylene MembraneCartridgeFilters
59
Che
mifi
lTM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
58
Specifications
Materials of ManufactureFiltermembrane: Polypropylene
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: ChemifilTM Junior 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam100x30minutecyclesat125°C(257°F)
ExtractablesMinimumtotalextractables.Pleaserefertothe ChemifilTM Validation Guide.
Integrity TestingEachChemifilTMmoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, PressureHoldandBubblePoint,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)ChemifilTM single cartridge exhibits theflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Gas Flow Rates• Typicalcleanairflowrate:
A254mm(10”)ChemifilTM single cartridge exhibits theflow-∆P characteristics indicated below.
250
50
050 150 200 250
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
C20
C10
200
100
150
800
200
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
C20
400
600
C10
250
50
050 150 200 250
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
C20
C10
200
100
150
800
200
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
C20
400
600
C10
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.1 and 0.2µm 0.66m2 (7.1ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
FluorofilTM cartridges are manufactured using a highly hydrophobic ePTFE membrane offering exceptionally high gas flow rates at low pressure differentials.
FluorofilTMcartridgesarerecommendedforsterilegasfiltrationandventingapplications.ThehydrophobiccharacteristicsoftheePTFEmembranemakestheFluorofilTMfiltercartridgeparticularlysuitableforwetgassterilisingapplications,suchasfermenterairfeed.
Forsolventandaggressivechemicalfiltrationapplications,FluorofilTM cartridges offer a wide range ofchemicalcompatibilitywithhighthermalstability.Suitableforthemostdemandingmicrofiltrationapplications, the cartridges can be used for the filtrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
Typical Applications
• Sterile process gases
• Sterile vents
• Finechemicalsandsolvents
• Photoresists and developers
• Purewatersupplysystems
Features and Benefits
• Guaranteedmicrobialratings.
• Bacterial spores and viruses. • FlowΔPcharacteristics.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Solventsandaggressivechemicals.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM ePTFEMembraneCartridge Filters
61
Fluo
rofil
TM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
60
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: FluorofilTM Junior 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat90°C(194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTM Validation Guide.
Integrity TestingEachFluorofilTMmoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, Pressure Hold and BubblePoint,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanairflowrate:
A254mm(10”)FluorofilTM single cartridge exhibits the flow-∆P characteristics indicated below.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)FluorofilTM single cartridge with 0.2µmmicrobialratingexhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
180
80
40
050 150 200 300
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
3barg
250
2barg
1barg
0barg
120
160
140
60
20
100
250
50
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
0.45µm
200
100
150
180
80
40
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
250mm Cartridge
120
160
140
60
20
100
0.2µm
0.1µm
180
80
40
050 150 200 300
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 100
3barg
250
2barg
1barg
0barg
120
160
140
60
20
100
250
50
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
0.45µm
200
100
150
180
80
40
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
250mm Cartridge
120
160
140
60
20
100
0.2µm
0.1µm
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating(inliquids) (each254mm(10")module)
0.02, 0.1, 0.2 and 0.45µm 0.73m2 (7.8ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Fluorofil™ Plus cartridges are manufactured using a highly hydrophobic ePTFE membrane. The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials.
FluorofilTMPluscartridgesarerecommendedforsterilegasfiltrationandventingapplications.ThehydrophobiccharacteristicsoftheePTFEmembranemakestheFluorofilTMPlusfiltercartridgeparticularlysuitable for wet gas sterilising applications, such as fermenterairfeed.
TheconstructionoftheFluorofilTM Plus cartridge has designfeaturesthatallowhighermembranesurfacearea, lower pressure drops and incorporates a stainless steelcoreforgreatermechanicalstrengthwhenoperatedathighertemperatures.
Typical Applications
• Sterile process gases
• Sterile vents
• Biotechnology
• Powder handling and tabletting
Features and Benefits
• Guaranteedmicrobialratings.
• Bacterial spores and viruses. • FlowΔPcharacteristics.
• Mechanical strength.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM Plus High Flow Sterile Gas Filters with ePTFE Membrane
63
Fluo
rofil
TM P
lus
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
62
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: 316Lstainlesssteel
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 127mm(5”) 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Gaskets and O-RingsEthylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating Temperature Maximumcontinuous: 80°C(176°F)
SterilisationIn situsteam500x30minutecyclesat135°C(275°F). In situsteamcyclesfor200hoursat142°C(286°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTM Plus Validation Guide.
Integrity TestingEachFluorofilTMPlusmoduleofeverycartridgeis individually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, PressureHoldandBubblePoint,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanairflowrate:
A254mm(10”)FluorofilTM Plus single cartridge exhibitstheflow-∆P characteristics indicated below.
160
80
40
050 150 200 300
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Airflow Rate (Nm3/hr)
0 100
3barg
250
2barg
1barg
0barg
120
140
60
20
100
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2µm 0.8m2 (8.6ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
FluorofilTM F100 cartridges are manufactured using a highly hydrophobic 1 micron PTFE membrane. The enhanced PTFE membrane offers exceptionally high liquid flow rates at low pressure differentials, making FluorofilTM F100 cartridges ideally suited to solvent filtration.
Forsolventandaggressivechemicalfiltrationapplications,FluorofilTM F100 cartridges offer a wide rangeofchemicalcompatibilitywithhighthermalstability.Suitableforthemostdemandingmicrofiltrationapplications, the cartridges can be used for the filtrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
Typical Applications
• Carbonfinesremoval
• Finechemicalandsolvents
• Photoresists and developers
Features and Benefits
• Guaranteed particle retention in a liquid challenge.
• FlowΔPcharacteristics.
• Cartridge integrity and low TOC levels.
• Solventsandaggressivechemicals.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM
F100 PTFEMembraneCartridges for Solvent Filtration
65
Fluo
rofil
TM F
100
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
64
Specifications
Materials of ManufactureFiltermembrane: PTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFEP encapsulated, Viton®, Ethylene Propylene, Nitrile or Silicone.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating Temperature (in water)Maximumcontinuous: 80°C(176°F)
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTM F100 Validation Guide.
Integrity TestingEachFluorofilTMF100moduleofeverycartridgeisindividually integrity tested using the Reverse Bubble Point Test, which correlates to the particle retention ratingdeterminedbythemodifiedOSUF-2SinglePassChallenge Test. Non-destructive integrity testing, using theReverseBubblePointTest,canbeperformedbytheenduser.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)FluorofilTM F100 single cartridge with 1.0µmparticleretentionratingexhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
50
20
10
040 120
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 80
3barg
160
30
40
60
20
05 15 25 30
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
50
30
40
10
20
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Micron Effective Filtration Area Rating(inwater) (each254mm(10")module)
1.0µm(″5000,99.98%) 0.68m2 (7.3ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of microbially rated cartridge filters from Porvair Filtration Group, featuring the latest developments in membrane technology, Hydrofil™ HT cartridges are based on a naturally hydrophilic nylon membrane. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the nylon membrane provides a high strength, long life cartridge of consistently precise particle retention across a wide range of particle sizes.
HydrofilTMcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatHydrofilTM cartridges are also very suitedtocriticalparticlecontroldownto0.03micronratings.HydrofilTMcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontonylonmembranes.
HydrofilTMcartridgesbenefitfromhighproteinbindingcharacteristicsofnylonmembranes.Theyarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
HydrofilTM cartridges are ideal for use in ultra pure water supplysystems(18MΩ.cm).
AsaconsequenceHydrofilTM cartridges provide a combinationoffeaturesandbenefitsnothithertoavailablefromcartridgesbasedonPVDF,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,bioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Biopharmaceuticals
• Electronicsandsemiconductors
• Finechemicals
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Excellentchemicalcompatibility. • Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
HydrofilTMNylon6.6MembraneCartridge Filters
67
Hyd
rofil
TM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
66
Specifications
Materials of ManufactureFiltermembrane: Nylon6,6
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 60°C(140°F)
SterilisationIn situsteam30x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe HydrofilTM Validation Guide.
Integrity TestingEachHydrofilTMmoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)HydrofilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
600
400
200
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
HT45
HT20
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.03, 0.1, 0.2 and 0.45µm 0.69m2 (7.4ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
The Porvair Filtration Group Hydrofil™ Plus microbial rated cartridge has been developed and manufactured for the filtration of liquids in the pharmaceutical, biotechnology and other critical applications. Hydrofil™ Plus utilises a naturally hydrophilic Nylon 6.6 membrane with a mirrored asymmetric pore structure. The cartridge’s unique built in pre-filtration membrane layer provides longer life and higher throughput.
Whencombinedwithqualityall-polypropylenecomponentsandhighintegritymanufacturingtechniques,theHydrofilTMPlusfiltercartridgeisideallysuitedtothemostdemandingprocessconditions.
Porvair HydrofilTM Plus cartridges are constructed in a cleanroomundertightlycontrolledconditionsusingadvanced,highlyspecialisedmachinery.Qualityandconsistency of product is assured by the quality control andmanufacturingprocedures,whichareinplacethroughoutallstagesofmanufacture.
HydrofilTMPlusmembranecartridgesare100%integritytestedduringmanufacturebytheforwardflowdiffusiontestmethod.
Typical Applications
• Biopharmaceuticals
• Fermentation
• API’s
• LVP’s
• Beverages
• Pure water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
HydrofilTM Plus Dual Nylon 6.6 Layer MembraneCartridgeFilters
69
Hyd
rofil
TM P
lus
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
68
Sterilisation
Materials of ManufacturePre-filtermembrane: Nylon
Finalmembrane: Nylon
Filtermembrane: Nylon
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 60°C(140°F)
SterilisationIn situsteam30x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe HydrofilTM Validation Guide.
Integrity TestingEachHydrofilTMPlusmoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)HydrofilTM Plus single cartridge exhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
2000
400
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
HTP20
1000
HTP10
800
1600
1400
1800
1200
600
200
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2µm 0.5m2 (5.38ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Vinofil™ membrane cartridges have been specifically designed, by Porvair Filtration Group for wine and beer filtration, as a final filter for cold biological stabilisation. Vinofil™ cartridges utilise a double layer of naturally hydrophilic polyethersulphone (PES) membrane with a mirrored asymmetric pore structure, which provides graded filtration throughout its depth, resulting in higher throughputs and long service life. When combined with quality all-polypropylene components and high integrity manufacturing techniques, the VinofilTM filter cartridge is ideally suited to the most demanding process conditions.
VinofilTMcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatVinofilTM cartridges are also very suited to critical particle control down to 0.2 micronratings.VinofilTMcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
VinofilTMcartridgesbenefitfromthelowbindingcharacteristicsofpolyethersulphonemembranes.Theyare also highly resistant to integrity failure caused by steamsterilisationandhaveexcellentcompatibilitywith CIP sterilising agents.
AsaconsequenceVinofilTM cartridges provide a combinationoffeaturesandbenefitsnothithertoavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,stabilisationandtheclarificationofawiderange of beverages.
Typical Applications
• Wineandsparklingwine
• Beer
• Mineralwaterandsoftdrinks
• Process water supply
Features and Benefits
• Guaranteedmicrobialratings.
• Low binding and fouling.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
VinofilTM DoubleLayerMembraneFilters for Wine and Beer Filtration
71
Vin
ofil
TM M
em
bra
ne C
art
ridg
e F
ilte
rsDisp
osableFilterElementsandCartridges
70
Specifications
Materials of ManufactureFiltermembranes: DualPolyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8”)
Length: 1module(short): 125mm(5”) 1module: 254mm(10”) 2modules: 508mm(20”) 3modules: 762mm(30”) 4modules: 1016mm(40”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Gaskets and O-RingsFDA approved Ethylene Propylene, FEP encapsulated, Silicone, Viton® or Nitrile.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationIn situsteam80x20minutecyclesat125°C(257°F). Hotwater100x20minutecyclesat85-90°C(185-194°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe VinofilTM Validation Guide.
Integrity TestingEachVinofilTMmoduleofeverycartridgeisindividuallyintegrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A254mm(10”)VinofilTM single cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
180
160
120
40
20
05 15 20 25
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow (l/min)
Clean Water Flow vs Differential Pressure
0 10
140
60
100
80
0.65µm
0.45µm
0.2µm
Ordering Information: Fororderinginformationpleasegotopage167.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating (each254mm(10")module)
0.2, 0.45 and 0.65µm 0.48m2 (5.2ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of absolute rated cartridge filters from Porvair Filtration Group, designed for retrofitting into existing junior-style housings. Featuring the latest developments in borosilicate glass fibre filter media technology, MicrofilTM Junior cartridges are constructed from robust glass fibre and polypropylene filtration layers, offering removal ratings from 0.5 to 5 micron absolute.
MicrofilTM Junior cartridges are suitable for absolute removalofunwantedparticulatesandforpre-filtrationtomembranefilters.
TheMicrofilTM Junior cartridges incorporate a polypropylenepre-filtrationlayer,combinedwithahighdirtcapacityglassfibremedia.Thishastheeffectoflongerservicelife,improvedoperatingcostsandsmallerprocessfootprint.
TheMicrofilTMJuniorfiltercartridgesarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Small-scalepharmaceuticalsandbioprocessing
• Pilot-scale studies
• Batch processing
Features and Benefits
• Zetapotential.
• Highfiltrationarea.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Full traceability.
• Controlledmanufacturingenvironment.
MicrofilTM Junior Absolute Rated Pleated Glass Fibre Cartridge FiltersforSmall-ScaleApplications
73
Mic
rofil
TM J
unio
r Dis
po
sab
le F
ilte
rsDisp
osableFilterElementsandCartridges
72
Specifications
Materials of ManufactureFiltermedia: Glassfibre
Pre-filtrationlayer: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Length: 77.5mm(2.5”) 136mm(5”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationJ-style: In situsteam70x25minutecyclesat130°C
(266°F).
S-style: Autoclave100x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe MicrofilTM Validation Guide.
Integrity TestingMicrofilTMJuniorfiltercartridgesarebatchtestedforintegrity using the Bubble Point Test. Procedural details areavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)MicrofilTM Junior cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
180
20
02 8 10
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 6
80
40
60
100
120
160
140
M01
MP8
MP5
4
Ordering Information: Fororderinginformationpleasegotopage168.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
AbsoluteRemoval EffectiveFiltrationArea Rating (for5"cartridge)
0.5, 0.8, 1.0, 2.0 and5.0µm 0.15m2 (1.6ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of absolute rated cartridge filters from Porvair Filtration Group, designed for retrofitting into existing junior-style housings. Featuring the latest developments in meltblown polypropylene filter media technology, Polyfil™ Junior cartridges are based on a robust all polypropylene construction, offering removal ratings from 0.5 to 5 micron absolute.
PolyfilTM Junior cartridges are suitable for absolute removalofunwantedparticulatesandforpre-filtrationtomembranefilters.
Thegradedmulti-layerpolypropylenemediaprovidepre-filtrationoftheprocessfluidpriortotheabsoluteratedfinallayer.TheuniquedesignofthePolyfilTM Junior cartridges helps to achieve lower running costs andasmallerprocessfootprint.
ThePolyfilTM Junior are also resistant to integrity failure causedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.
Theyaresuitableforapplicationsrangingfrombioburdenreductionandtheclarificationofawiderange of process liquids and end products.
Typical Applications
• Small-scalepharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Small-scalefinechemicals
• Pilot-scale studies
• Inksandcoatings
Features and Benefits
• Gradedmulti-layermedia.
• Highfiltrationarea.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Environmentallyfriendly.
• Full traceability.
• Controlledmanufacturingenvironment.
PolyfilTM Junior Absolute Rated Pleated Polypropylene Cartridge FiltersSmall-ScaleApplications
75
Poly
filTM
Jun
ior D
isp
osa
ble
Filt
ers
Disp
osableFilterElementsandCartridges
74
Specifications
Materials of ManufactureFiltermedia: Polypropylene
Supportlayers: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Length: 77.5mm(2.5”) 136mm(5”)
Effective Filtration AreaUpto0.15m2 (1.6ft2)per136mmmodule(dependingonporerating).
Cartridge TreatmentStandard: Cleanedwithoutfurthertreatment.
Flushed: Flushedwithpyrogen-freewater.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationJ-style: In situsteam70x25minutecyclesat125°C
(257°F).
S-style: Autoclave100x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe PolyfilTM II Validation Guide.
Integrity TestingPolyfilTMJuniorfiltercartridgesarebatchtestedforintegrity using the Bubble Point Test. Procedural details areavailablefromPorvair.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)PolyfilTM Junior cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
700
02 8 10
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 6
200
100
500
300
600
400
P01
PP8
PP5
4
25
5
02 8 10
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 6
10
20
15
P40
P20
P10
4
P05
Ordering Information: Fororderinginformationpleasegotopage168.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
A range of microbially rated cartridge filters from Porvair Filtration Group, designed for retrofitting into existing junior-style housings. Biofil™ Junior cartridges are based on a naturally hydrophilic polyethersulphone membrane with a mirrored asymmetric pore structure. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the polyethersulphone membrane provides a high strength, long life cartridge of consistently precise microbial retention.
BiofilTMJuniorcartridgesexploitthenarrowporesizedistributionandhighvoidvolumeofthemediatoprovideachoiceofcartridgescapableofmeetingtherequirementsofmostapplications.CarefulmediaselectionensuresthatBiofilTM Junior cartridges are also very suited to critical particle control down to 0.04 micronratings.BiofilTMJuniorcartridgesofferhighfluxratesandlowdifferentialpressures,afeaturecommontopolyethersulphonemembranes.
BiofilTMJuniorcartridgesbenefitfromthelownon-specificproteinbindingcharacteristicsofpolyethersulphonemembranes.Theyarealsohighlyresistanttointegrityfailurecausedbysteamsterilisationandhaveexcellentchemicalcompatibilitycharacteristics.Furthermore,sincetheywillnothydrolyse,BiofilTM Junior cartridges are ideal for use in ultrapurewatersupplysystems(18MΩ.cm).
AsaconsequenceBiofilTM Junior cartridges provide acombinationoffeaturesandbenefitsnothithertoavailablefromcartridgesbasedonPVDF,nylon,mixedestersofcelluloseorpolysulphonemembranes.Theyaresuitableforapplicationsrangingfromsterilefiltration,bioburdenreductionandtheclarificationofaof process liquids and end products.
Typical Applications
• Small-scalebiopharmaceuticals
• Ophthalmicsolutions
• Electronicsandsemiconductors
• Small-scalefinechemicals
• Pilot-scale studies
• Point-of-use water supply
Features and Benefits
• Guaranteedremovalratings.
• Low protein binding.
• Will not hydrolyse.
• Excellentchemicalcompatibility.
• Cartridge integrity and low TOC levels.
• Suitableforsteamsterilising.
• Full traceability.
• Controlledmanufacturingenvironment.
BiofilTM Junior Polyethersulphone MembraneCartridgeFiltersforSmall-ScaleApplications
77
Bio
filTM
Jun
ior D
isp
osa
ble
Filt
ers
Disp
osableFilterElementsandCartridges
76
Specifications
Materials of ManufactureFiltermembrane: Polyethersulphone
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Supportring: Stainlesssteel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Length: 77.5mm(2.5”) 136mm(5”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushedwithpyrogen-free
water.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi)
Reverseflowdirectionat: 20°C(68°F): 2.1bar(30psi) 80°C(176°F): 1.0bar(15psi) 100°C(212°F): 0.5bar(7psi)
Operating TemperatureMaximumcontinuous: 85-90°C(185-194°F)
SterilisationJ-style: In situsteam70x25minutecyclesat125°C
(257°F).
S-style: Autoclave100x25minutecyclesat125°C(257°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe BiofilTM II Validation Guide.
Integrity TestingEachBiofilTMJuniormoduleofeverycartridgeisindividually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Pressure Hold, Diffusive Flow and Bubble Point,canbeperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)BiofilTM Junior cartridge exhibits the flow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1centipoise,multiplytheindicateddifferentialpressure by the viscosity in centipoise.
Ordering Information: Fororderinginformationpleasegotopage168.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
1000
400
200
05 15 20 30
Diff
ere
ntia
l Pre
ssur
e (
mb
ar)
Flow Rate (l/min)
0 10
0.45 micron
25
0.2 micron
800
600
Absolute Microbial Effective Filtration Area Rating (foreach5"cartridge)
0.04, 0.1, 0.2, 0.45, 0.65and1.2µm 0.19m2 (2.05ft2)
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
FluorofilTM Junior cartridges are manufactured using a highly hydrophobic ePTFE membrane and are designed for retrofitting into existing Junior-style housings. The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials (see graph).
TheJuniorrangeareavailableintwoformats:J-style,asingleopen-endedelementwithasingleinternalo-ringsealonthedownstreamendcapandS-style,asingleopen-endedelementincorporatinganintegralflangeonthedownstreamendcap.
FluorofilTMJuniorcartridgesarerecommendedforsmall-scalesterilegasfiltrationandventingapplications.ThehydrophobiccharacteristicsoftheePTFEmembranemakestheFluorofilTMJuniorfiltercartridgeparticularlysuitable for wet gas sterilising applications, such as small-scalefermenterairfeed.
Forsmall-scalesolventandaggressivechemicalfiltrationapplications,FluorofilTM Junior cartridges offer a widerangeofchemicalcompatibilitywithhighthermalstability.Suitableforthemostdemandingmicrofiltrationapplications, the cartridges can be used for the small-scalefiltrationofaggressivechemicalsolutionsincludingacids,alkalis,solventsandetchants.
FluorofilTM Juniors can be used in scale-up bench-top experimentsandpilotplantevaluationstoconfirmsuitability in new process applications.
Typical Applications
• Sterile vents
• Small-scalesterileprocessgases
• Small-scalefinechemicalsandsolvents
• Small-scalephotoresistsanddevelopers
Features and Benefits
• Zetapotential.
• Highfiltrationarea.
• Guaranteedremovalratings.
• Suitableforsteamandhotwatersanitisation.
• Full traceability.
• Controlledmanufacturingenvironment.
FluorofilTM Junior ePTFEMembraneCartridge Filters for Small-ScaleApplications
79
Fluo
rofil
TM J
unio
r Dis
po
sab
le F
ilte
rsDisp
osableFilterElementsandCartridges
78
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Internaladaptorsupportring: Stainless steel
Cartridge Dimensions (Nominal)Diameter: 56mm(2.2”)
Lengths: 77.5mm(2.5”) 136mm(5”)
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Gaskets and O-RingsJ-style: Silicone(othermaterialsareavailable
onrequest).
S-style: Notsupplied.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
Operating TemperatureMaximumcontinuous: 80°C(176°F)
SterilisationAutoclave70x25minutecyclesat135°C(275°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTM Validation Guide.
Integrity TestingEachFluorofilTM Junior cartridge is individually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, Pressure Hold and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Gas Flow Rates• Typicalcleanairflowrate:
A136mm(5”)FluorofilTM Junior cartridge exhibits the flow-∆P characteristics indicated below.
Clean Water Flow Rates• Typicalcleanwaterflowrate:
A136mm(5”)FluorofilTM Junior cartridge(J-style)with0.2µmmicrobialratingexhibitstheflow-∆P characteristics indicated below, for solutions with a viscosity of 1 centipoise.
• Othersolutions: For solutions with a viscosity of greater than 1 centipoise, multiplytheindicateddifferential pressure by the viscosity in centipoise.
Ordering Information: Fororderinginformationpleasegotopage168.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Absolute Microbial Effective Filtration Area Rating(inliquids) (for5"cartridge)
0.2µm 0.19m2 (2.05ft2)
180
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
240
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
220
200
180
J-Style S-Style
900
100
05 15 20
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Water Flow Rate (l/min)
0 10
400
200
300
500
600
800
700
180
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
240
80
40
020 60 80 100
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
3barg
2barg
1barg
0barg
120
160
140
60
20
100
220
200
180
J-Style S-Style
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
Ventafil™ cartridges are manufactured using a highly hydrophobic ePTFE membrane and are designed for autoclave venting. The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials.
VentafilTM cartridgesaredesignedwitha½″BSPmalethreadforautoclaveandsmalltankventingapplications. The hydrophobic characteristics of the ePTFEmembranemakestheVentafilTMfiltercartridgeparticularlysuitableforrapidvacuumbreakinautoclaves.
Typical Applications
• Autoclave vents
• Sterile product storage vessels
Features and Benefits
• Guaranteedmicrobialratingsinaliquid challenge.
• Bacterial spores and viruses.
• FlowΔPcharacteristics.
• Steamsterilisation.
• Cartridge integrity and low TOC levels.
• Full traceability.
• Controlledmanufacturingenvironment.
VentafilTM ePTFEMembraneCartridge Filters for Autoclave Venting
81
Ve
nta
filTM
Me
mb
rane
Ca
rtrid
ge
Filt
ers
Disp
osableFilterElementsandCartridges
80
Specifications
Materials of ManufactureFiltermembrane: ePTFE
Membranesupport: Polypropylene
Irrigationmesh(support): Polypropylene
Drainagelayer: Polypropylene
Innercore: Polypropylene
Outersupport: Polypropylene
Endfittings: Polypropylene
Sealing: Fusionbonding
Cartridge Dimensions (Nominal)Diameter: 70mm(2.8")
Length: 64mm(2.5") 136mm(5")
Effective Filtration Area
Cartridge TreatmentStandard: Cleanedandflushed,withoutfurther
treatment.
Rinsed: Ultra-clean,pulseflushedtogiveasystemresistivityof18MΩ.cm.
Adaptor and O-RingSilicone(othermaterialsareavailableonrequest). ½"BSPmalethread.
Maximum Differential PressureNormalflowdirectionat: 20°C(68°F): 6.0bar(87psi) 80°C(176°F): 4.0bar(58psi) 100°C(212°F): 3.0bar(44psi) 120°C(248°F): 2.0bar(29psi) 125°C(257°F): 1.5bar(22psi)
SterilisationIn situsteam70x25minutecyclesat135°C(275°F).
ExtractablesMinimumtotalextractables.Pleaserefertothe FluorofilTM Validation Guide.
Integrity TestingEachVentafilTM cartridge is individually integrity tested using the Diffusive Flow Test, which correlates to the HIMA and ASTM F838-05 bacterial challenge tests. Non-destructive integrity tests, such as Diffusive Flow, Water Intrusion, Pressure Hold and Bubble Point, can beperformedbycustomers.ProceduraldetailsareavailablefromPorvair.
Clean Air Flow Rates• Typicalcleanairflowrate:
A136mm(5")VentafilTMcartridgeexhibitstheflow-∆P characteristics indicated below.
Clean Air Flow Rates
• Vacuumbreakapplication: Iftheinitialvacuumisat-980mbarg,thetimerequiredbeforethevacuumbreakconditionsrequired to safely open the autoclave door (at -20mbarg)areachieved,isindicatedbelow.
Ordering Information: Fororderinginformationpleasegotopage168.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
500
020 60 70 80
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
200
400
300
100
5
2
0100 200 250 300
Cha
mb
er V
olu
me
(m
3 )
Time Required to Reach Vacuum Break(s) (secs)
0 150
3
1
503010
4
50
Absolute Microbial Effective Filtration Area Rating(inliquids) (for5"cartridge)
0.2µm 0.37m2 (4.0ft2)
500
020 60 70 80
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Clean Air Flow Rate (Nm3/hr)
0 40
200
400
300
100
5
2
0100 200 250 300
Cha
mb
er V
olu
me
(m
3 )
Time Required to Reach Vacuum Break(s) (secs)
0 150
3
1
503010
4
50
DISPOSABLE FILTER ELEMENTS AND CARTRIDGES
83
Porvair Filtration Group manufacture a full range of stainless steel industrial and sanitary housings, available from 10 to 20bar (145-290psi), with both single and multi-element housings to suit every application. The housings have in-line BSP port connections for ease of installation. Tri-clover and weld connections are available.
Aspecialrangeofhigh-pressure350bar(5,076psi)rated housings are also available on request. Housings manufacturedfromotheralloysandmadetootherdesign codes are also available on request, please contact us for further details.
83
Filter Element and Cartridge Housings
Porvair Filtration Group manufacture a full range of stainless steel industrial and sanitary housings, available from 10 to 20bar (145-290psi), with both single and multi-element housings to suit every application. The housings have in-line BSP port connections for ease of installation. Tri-clover and weld connections are available.
Porvair Filtration Group’scurrentrangeoffilterhousingsareavailableinroundsfrom1-30.
Aspecialrangeofhigh-pressure350bar(5,076psi)rated housings are also available on request. Housings manufacturedfromotheralloysandmadetootherdesign codes are also available on request, please contact us for further details.
Typical Applications
• Metalfilterelements
• Disposablefiltercartridges
Features and Benefits
• Resistanttohightemperaturesandcorrosive environments. • Suitableforaggressiveairandliquidfiltration applications. • Inherent strength for long service life in arduous
applications.
• Controlledporesize,ensuresoptimumrepeatperformance.
Filter HousingsStainless Steel Industrial and Sanitary Housings
8584
Ordering Information: Fororderinginformationpleasegotopage170-171.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sta
inle
ss S
tee
l Filt
er H
ous
ing
sFilterElementandCartridgeHousings
Optional Material and Surface Treatments
• Stainless steel 316L
• Hastelloy®
• Internalweldsgroundflushandsmooth
• Electro polished
• Mirrorfinished
• Surfacefinish240grit
• Various coatings
Control Systems
Someofthecontroloptionsavailableare:
• Solenoid operated valve
• Controltimer
Coded Vessels
VesselscanbesuppliedtoBS5500,ASMEVIIIU’Stamp,ADM-TÜV. Other standards are available upon request.
Thesystemsaredesignedandbuilttoindividualcustomersspecificationsandneeds.Atailoredpulsedjetsupplysystemisvitaltoagoodperformanceofthefilterassembly.
FILTER ELEMENT AND CARTRIDGE HOUSINGS
87
Last chance filters perform a complimentary role to main system filters. These are designed to remove and retain contamination such as machining chips, burrs, wear debris and fluid breakdown products induced during operation or built in downstream of the main system filters.
Porvair Filtration Groupofferarangeoffilters,alldesignedtospecificperformanceandinstallationrequirements.Thesefiltersareavailableinthefollowingmediaconfigurations:
• Sinterflo®Fsinteredmetalfibre
• Sinterflo®Psinteredmetalpowder
• Sinterflo®Mmetalmesh
• Sinterflo®MCsinteredmetalmeshcomposite
• Laser drilled • Polymers:polypropylene,acetal,peek,nylon,
PTFE.
InprintaistheInkjetsalesdivisionofPorvair Filtration Group. Inprintadesignandmanufactureawiderangeofin-lineandlastchancefilterstooffersolutionsforinkjetfiltrationthroughoutthebodyoftheprinter.
Theseself-containedfilterassembliesareprovidedforvariedtypesofinkjetapplicationsincludingCIJcoding,textile,ceramicsandgraphics.
87
In-Line and Last Chance Filters
Porvair Filtration Group offer a comprehensive range of filters for complete system protection. These include metal mesh filter discs, which are available in both pleated and flat versions, to suit specific application requirements.
Themetalmeshfilterdiscsaredesignedandmanufacturedtoprovidefiltrationprotectioninliquidandgasflowsystems.
Thesecost-effectivemeshfilterdiscsprovideasignificantincreaseinfiltrationareaforasimilarinstallation.
Porvair Filtration Group’slightweightstainlesssteelfilterdiscsarecapableofoperatingwithavarietyoffluidsattemperaturesfrom-270-450°C(-454-842ºF),andwithdifferentialpressuresupto3bar(43psi).
Metalmeshfiltersareavailableintwodistincttypes,rimmedandunrimmed.
Typicalapplicationsincludespinpackfiltersusedinthemanufactureofman-madepolymerfibrematerialsfortextile products.
Typical Applications
• Liquidfiltration
• Airfiltration
• Hydraulics
• Spinpackfilters
Features and Benefits
• Low pressure drop.
• Easily cleanable.
• Highoperatingtemperatures.
Metal Mesh Filter DiscsFlat and Pleated
8988
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Me
tal F
ilte
r Dis
cs
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
Porvair Filtration Group can offer a comprehensive range of fibre disc filters for complete system protection in both gaseous and liquid applications. These can be supplied in either flat or pleated versions to suit requirements.
Inexpensiveflatdiscsaresuitedtoapplicationswherespacemaybeapremium,orwherelimitedcontaminantisexpected.
Forsystemswherealargerfiltrationareaorlowerpressuredropisrequiredbutstillwithinalimitedfootprint, we can offer a pleated disc. Both designs canbeofferedwithorwithoutasealingrimandinacomprehensiverangeoffiltrationratingstosuitavariety of operating conditions.
Typicalapplicationsincludespinpackfiltersusedinthemanufactureofmanmadepolymerfibrematerialsfortextile products.
Typical Applications
• Liquidfiltration
• Airfiltration
• Hydraulics
• Spinpackfilters
Features and Benefits
• Low pressure drop.
• Easily cleanable.
• Widerangeofoperatingtemperatures.
• Varietyoffiltrationratingsavailable.
• Lightweight and robust construction.
• Suitable for gaseous and liquid applications.
Metal Fibre Filter DiscsFlat and Pleated
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
IN-LINE AND LAST CHANCE FILTERS
Porvair Filtration Group manufacture a wide range of metal powder filter discs, available in diameters from 0.5mm (0.02") to over 203mm (8") with a wide range of thicknesses.
Powdermetallurgytechniquesareusedtoproduceporous discs with interconnected porosity and densities rangingfrom35%to75%.Theporosityofthediscconsistsofawideporesizedistributioncentredaroundameanporesize.
Poroussinteredmetaldiscsareavailablein15differentstandardmicrongradeswithporesizesrangingfroma0.003to200micrometers.
Discsizesandtolerancesaredependentonthematerial,microngradeandthedensityrequirements.
Typical Applications
• Liquidandgasfiltration
• Frits
• Pressure snubbers
• Aerators
• Supportforchromatographycolumns
• Basecomponentsorassemblies
Features and Benefits
• Low pressure drop.
• Easily cleanable.
• Highoperatingtemperatures.
Metal Powder Filter DiscsFlat Discs
9190
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Me
tal F
ilte
r Dis
cs,
In-L
ine
Ele
me
nts
and
Sc
ree
nsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
To enhance performance capabilities, Porvair Filtration Group produce a vast range of tubular last chance filters and screens.
Designedtobefullyintegratedintocustomersystems,thesefiltersaremanufacturedusinganumberoftechniquesincludingmicroresistancewelding,fusionwelding,laserdrillingandinjectionmoulding.
Ourelementsaredesignedforlongon-streamlifeandcan be designed and constructed to withstand full systempressure.
Materials of construction • Stainlesssteelornickel-basedalloys
• Sinterflo®Fsinteredmetalfibre
• Sinterflo®Psinteredmetalpowder
• Sinterflo®Mmetalmesh
Typical Applications
• Hydraulics
• Pneumatics
• Oilandlubricationsystems
• Fuelsystems
• Printinginks
Features and Benefits
• Availableinpleatedorcylindricalelementdesigns.
• Varietyoffiltrationratingsavailabletosuitawiderange of applications.
In-Line Elements and Screens
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
IN-LINE AND LAST CHANCE FILTERS
In applications where the filter assembly is to be fitted for life or when it is not practical to handle the filter after use, Porvair Filtration Group can supply fully welded assemblies for direct installation into various systems. These are available in both metallic and polymeric forms, depending upon the system requirement.
Inmanyapplicationsthefilterdiscsortubularinsertsaresuppliedfullyintegratedintoaminiaturehousing,whichformspartofthecustomer’ssystemallowingeasyreplacementofthefilter.
Porvair Filtration Group’sfilterscanbeintegratedwithinavarietyofstandardindustryfittings.
Ourhousingscanbemadefromavarietyofmaterialsincludingaluminiumalloy,stainlesssteel,titaniumandengineeringthermoplastics.
Typical Applications
• Hydraulics
• Pneumatics
• Oilandlubricationsystems
• Fuelsystems
• Printinginks
Features and Benefits
• Availableinpleatedorcylindricalelementdesigns.
• Varietyoffiltrationratingsavailabletosuitawiderange of applications.
• Varietyofendfittingsavailableincludingthreadedandpush-fitbarbedconnectors.
Union Filters and Miniature Housings
9392
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Uni
on
Filte
rs, M
inia
ture
and
In-L
ine
Ho
usin
gs
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
For highly contaminated systems, Porvair Filtration Group have designed a range of in-line filter housing assemblies.
Thesefiltersfeaturearemovablepleatedorcylindricalfiltercartridgewithanincreasedfilterareaand,therefore, operational life. Additional optional features includebypassdevicesandsystemconditionmonitors.
Materials of construction • Stainlesssteelornickel-basedalloys.
• Varietyofpolymericmaterials.
Typical Applications
• Hydraulics
• Pneumatics
• Oilandlubricationsystems
• Fuelsystems
• Printinginks
Features and Benefits
• Varietyoffiltrationratingsavailabletosuitawiderange of applications.
• Varietyofendfittingsavailableincludingthreadedandpush-fitbarbedconnectors.
In-Line Filter Housings
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
IN-LINE AND LAST CHANCE FILTERS
95
Fina
l Ink
and
In-L
ine
Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
94
Ordering Information: Fororderinginformationpleasegotopage172-173.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
A final, or last chance filter, manufactured from stainless steel and is 100% chemically compatible to volatile inkjet materials.
Thisfullyweldedfiltergivesexcellentstructuralintegrityforthefiltermeshandeffectiveremovalofanyremainingcontaminantsbeforetheyreachtheprinthead.
Specifications
Filter Code8069
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating5µm,15µm,25µm,40µm
DimensionsFilterlength: 50mm(1.98") Filterwidth: 12mm(0.47")
Filter Area19cm2 (2.95in2)
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Final Ink Filters
A small in-line filter manufactured for digital inkjet printers.
Thestainlesssteelconstructionprovidesafilterwithlowextractablesand100%compatibilitywithallinkjetfluidsto ensure an extended life span.
Specifications
Filter Code8073
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating10µm
Dimensions Filterlength: 35mm(1.38") Filterwidth: 8mm(0.31")
Filter Area7cm2 (1.08in2)
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
In-Line FiltersStainless Steel
IN-LINE AND LAST CHANCE FILTERS
97
Ple
ate
d U
nrim
me
d a
nd M
icro
dis
c™
3SS
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
96
Ordering Information: Fororderinginformationpleasegotopage172-173.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
The stainless steel in-line filter is designed to meet all digital inkjet requirements.
Superiorfiltrationintegrityisachievedthroughafullyweldedhousingincorporatingastainlesssteelmeshfilter.Fullchemicalcompatibilitygivesthefilteranextended lifespan.
Specifications
Filter Code8067
Materials of Manufacture
Filtermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating5µm,10µm,20µm
DimensionsFilterdiameter: 30mm(1.18") Filterwidth: 22mm(0.87")
Filter Area5cm2 (0.76in2)
ConnectorsBarb: 2.6mm(0.10")O/Dbarb
4.9mm(0.19")O/Dbarb
Maximum Operating Pressure6.5bar(94psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 3SS30mmStainlessSteelDiscFilters
This is a small unrimmed stainless steel disc filter designed for use on inkjet printers.
Itisafullyweldedselfcontainedfilterwithanintegratedmeshmediainarangeofmicronratings.Completechemicalcompatibilitygivesthefilteranextended life span.
Specifications
Filter Code8071
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating2µm,5µm,10µm,20µm
DimensionsDisclength: 9.5mm(0.37") Discwidth: 2.2mm(0.08")
Filter Area1.1cm2 (0.17in2)
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Pleated Unrimmed Disc Filters
IN-LINE AND LAST CHANCE FILTERS
99
Mic
rod
isc
™ 4
SS D
isc
and
Grid
Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
98
Ordering Information: Fororderinginformationpleasegotopage172-173.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Asmallpre-headfiltermanufacturedfromstainlesssteelmesh.Thefiltercomescompletewithacompatibleo-ringandisdesignedasalastchancefiltergivingexcellentprotectiontotheprinthead.
Specifications
Filter Code8156
Materials of ManufactureFiltermedia: Stainlesssteelmesh
Micron Rating14µm
DimensionsDiscdiameter: 23mm(0.9") Discwidth: 2mm(0.08")
Filter Area4.2cm2 (0.65in2)
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Grid Filters and O-Rings
IN-LINE AND LAST CHANCE FILTERS
The stainless steel in-line filter, designed for graphics printers, is fully welded for complete filtration integrity.
Withexcellentflowratesthisfilteris100%chemicallycompatibletoallinkjetfluidsgivinganextendedlifespanandreducedprinterservicerequirements.
Specifications
Filter Code8077
Materials of Manufacture
Filtermedia: Stainlesssteelmesh Housingmaterial: Stainlesssteel
Micron Rating5µm,10µm,20µm
DimensionsFilterdiameter: 47mm(1.85") Filterwidth: 30mm(1.18")
Filter Area13cm2 (2.01in2)
ConnectorsBarb: 2.6mm(0.10")O/Dbarb
4.9mm(0.19")O/Dbarb 6.5mm(0.25")O/Dbarb
Jaco®: 3mm(0.12”)NPT: ¼" NPT
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 4SS47mmStainlessSteelDiscFilters
Air filter with a hydrophobic filter membrane to act as a barrier to all contaminants.
Specifications
Filter Code8163
Materials of ManufactureFiltermedia: PTFE Housingmaterial: Polypropylene
Micron Rating0.2µm
DimensionsDiscdiameter: 15mm(0.59") Discwidth: 16mm(0.62")
ConnectorsLuer: Femaleluer/malesyringe
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 1PA15mmS-VentDiscFilters
101
Mic
rod
isc
™ 1
PA a
nd M
icro
dis
c™
2PA
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
100
Ordering Information: Fororderinginformationpleasegotopage174-175.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Air filter with a hydrophobic filter membrane to act as a barrier to all contaminants.
Specifications
Filter Code8164
Materials of ManufactureFiltermedia: PTFE Housingmaterial: Polypropylene
Micron Rating0.2µm
DimensionsDiscdiameter: 25mm(0.98") Discwidth: 19mm(0.74")
ConnectorsLuer: Femaleluer/malesyringe
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 2PA25mmS-VentDiscFilters
IN-LINE AND LAST CHANCE FILTERS
A filter of superior quality and design, the 33mm in-line disc filter is manufactured to the highest specifications for the super-wide format graphics market.
Thisinkjetspecificself-containedunitisdesignedaround an all Acetal or construction and is available instandardwhitehousing,orblackhousingforUVapplications.
Ultrasonically welded with no binding agents for low extractables,thefilterensurescompletecompatibilitywithinkjetsolvents.Theinnermeshensuresprecisefilterspecificationtotherequiredabsolutemicronrating.
Specifications
Filter Code8159
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal
Micron Rating5µm,10µm,15µm,20µm,50µm
DimensionsDiscdiameter: 33mm(1.3”) Discwidth: 8mm(0.31”) Overallwidth: Connectordependant
Filter Area12.5cm2 (1.94in2)
ConnectorsJaco®: 3mmJaco® Luer: Femaleluer
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 3PS33mmPolymericIn-Line Disc Filters
103
Mic
rod
isc
™ 3
PS a
nd M
icro
dis
c™
4PS
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
102
Ordering Information: Fororderinginformationpleasegotopage174-175.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
A filter of superior quality and design, the 45mm in-line disc filter is manufactured to the highest specifications for the super-wide format graphics market.
Ultrasonically welded with no binding agents for low extractables,thefilterensurescompletecompatibilitywithinkjetsolvents.Theinnermeshensuresprecisefilterspecificationtotherequiredabsolutemicronrating.
Specifications
Filter Code8111
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal
Micron Rating5µm,10µm,20µm,50µm
Dimensions Discdiameter: 45mm(1.77") Discwidth: 9mm(0.35") Overallwidth: connectordependant
Filter Area12.5cm2 (1.94in2)
ConnectorsLuer and CPC
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 4PS45mmPolymericStandardDisc Filters
IN-LINE AND LAST CHANCE FILTERS
Inprinta’s black acetal pre-pump filter is manufactured specifically for use with Digital Inkjet equipment.
Thehighgradematerialsgivegoodflowratesandcompletechemicalcompatibilityunderallrequiredconditions for extended life span.
Specifications
Filter Code8074
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal
Micron Rating5µm,10µm,15µm,20µm,50µm,
Dimensions Discdiameter: 45mm(1.77") Discwidth: 37mm(1.46")
Filter Area12.5cm2 (1.94in2)
ConnectorsJaco®: ¼"Jaco® 6mmJaco®
Maximum Operating Pressure5bar(72.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 4PV45mmPolymericVolume Disc Filters
105
Mic
rod
isc
™ 4
PV a
nd M
icro
dis
c™
7PS
Dis
c F
ilte
rsIn
-Lin
e a
nd
La
st C
ha
nc
e F
ilte
rs
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
104
Ordering Information: Fororderinginformationpleasegotopage174-175.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Inprinta’s MicrodiscTM 7PS is a large over-moulded polypropylene disc filter that gives excellent flow rates.
The MicrodiscTM7PSalsoensurescompletechemicalcompatibilityforallUVandsolventinkjetapplications.
Specifications
Filter Code8169
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural.
Micron Rating5µm,10µm,20µm,50µm
DimensionsDiscdiameter: 74mm(2.91") Discwidth: 47mm(1.85")
Filter Area19cm2 (2.95in2)
ConnectorsJaco®: ¼" Jaco® 6mmJaco®
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrodiscTM 7PS74mmPolymericDiscFilters
IN-LINE AND LAST CHANCE FILTERS
A fully integrated polypropylene filter media precision manufactured into a polypropylene housing.
Thisin-linefilterhasexcellentchemicalcompatibilitytoinkjetfluids.Thehighefficiencyfiltersgivelongservicelifeandarebondedforminimalextractables.
Specifications
Filter Code8166 / 8065
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene
Micron Rating5µm,10µm
DimensionsFilterlength: 61mm(2.4") Filterwidth: 11mm(0.43")
ConnectorsBarb
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Bullet Filters5-10µm
107
Bulle
t and
In-L
ine
Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
106
Ordering Information: Fororderinginformationpleasegotopage174-175.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
This filter is an inkjet in-line filter manufactured from PEEK material and a stainless steel mesh.
Thesematerialsmakeitasuperiorproductwithextendedlifeinyourinkjetprinter.
Specifications
Filter Code8098
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: PEEK HousingColour: Opaqueblackornatural
Micron Rating3µm,5µm
DimensionsDiscdiameter: 44mm(1.73") Discwidth: 15mm(0.59")
Filter Area3.5cm2 (0.54in2)
ConnectorsJaco®: ¼"Jaco® 6mmJaco®
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
In-Line Filters PEEK
IN-LINE AND LAST CHANCE FILTERS
109
In-L
ine
UV
and
La
st C
hanc
e In
kje
t Filt
ers
In-L
ine
an
d L
ast
Ch
an
ce
Filt
ers
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
108
Ordering Information: Fororderinginformationpleasegotopage174-175.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Inprinta’s in-line UV filter is designed to meet all inkjet requirements.
ManufacturedinPEEK,thisfiltergivesexcellentfilterintegrityandis100%compatiblewithinkjetfluids.
Specifications
Filter Code8091
Materials of ManufactureFiltermedia: Stainlesssteel Housingmaterial: PEEK
Micron Rating3µm,5µm,10µm
DimensionsDiscdiameter: 47mm(1.85") Discwidth: 15mm(0.59")
Filter Area3.5cm2 (0.54in2)
ConnectorsJaco®: 3mm(0.12")Jaco®
Maximum Operating Pressure3bar(43.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
In-Line UV FiltersPEEK
IN-LINE AND LAST CHANCE FILTERS
This filter is manufactured in black acetal and designed to be used on inkjet equipment in conjunction with an Inprinta main (capsule) filter.
Situatedclosetotheprinthead,thisfilterisdesignedtocaptureanyparticlesbeforedamagecanbecausedtotheprinthead.Thisfilteris100%chemicallycompatibletoallinkjetfluidsgivinganextendedlifespan.
Specifications
Filter Code8087
Materials of ManufactureFiltermedia: Stainlesssteelmesh Housingmaterial: Acetal
Micron Rating3µm,5µm,50µm
Dimensions Discdiameter: 21mm(0.83") Discwidth: 8mm(0.31")
Filter Area 12cm2 (1.86in2)
Connectors2.6mm(0.1")barb
Maximum Operating Pressure1bar(14.5psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Last Chance Inkjet Filters
111
Inprinta is the Inkjet sales division of Porvair Filtration Group, supplying quality inkjet filtration assemblies. Inprinta’s filters are designed and manufactured in the UK for the digital printing market, with specialist applications in capsule filters.
Thismainsystemfilterisspecificallydesignedfortherequirementofdigitalinkjetprinterfiltration.The self contained unit is designed around an all-polypropylene construction with no binding agents, to givelowextractablesandensure100%compatibilitywithinkjetfluids.Allcapsulefiltersareavailableforstandardsolvent,aqueousandUVinksystems.
• Capsulefiltersarepressuretestedtoguaranteecapsule integrity.
• AllfilterhousingishighgradePolypropylene.
• An integrated Vyon® core gives added security.
• Operatingtemperaturefrom0°Cto50°C(32ºFto122ºF).
• 6bar(87psi)operatingpressure.
Inprinta capsules are self contained, ready to use, disposabledevices.Thefilterbodyisconstructedwithnaturaloropaqueblackhousingandavailablewithawiderangeofconnectorconfigurationstosuitdifferentsystems.Allcapsuleswillprovideconsistent,reliableprintingperformancewithmaximisedprintheadprotection.
111
Disposable Capsule FiltersforInkjetFiltration
This main system filter is specifically designed for the requirement of graphics printer filtration.
Theinkjetspecific,self-containedunitisdesignedaround an all polypropylene construction with no binding agents, to give low extractables and ensure 100%compatibilitywithinkjetfluids.
AvailableforstandardorUVinks,thisunitalsohasawiderangeofconnectorsandfilterratings.
Specifications
Filter Code8089
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural
Micron Rating0.5µm,1µm,3µm,5µm,10µm,20µm,40µmand60µm(additionalratingsareavailableonrequest).
DimensionsFilterdiameter: 65mm(2.56") Filterheight: 88mm(3.46")(plusconnectors)
Filter Area500cm2 (77.5in2)
ConnectorsBarb: ¼”barb NPT: ¼”NPTmale Jaco®: ¼”Jaco® ¼”Jaco®90º 6mmJaco®90º 6mmJaco® CPC: CPC Luer: Luer Luer90º
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Flow Rate
MicrocapTM MainSystemCapsuleFilters
Mic
roc
ap
™ a
nd M
icro
prin
t™ C
ap
sule
Filt
ers
Disp
osableCapsuleFiltersfo
rInkjetFiltration
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
112
Ordering Information: Fororderinginformationpleasegotopage176-177.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
The MicroprintTM main system filter is specifically designed for the requirement of printer filtration.
Thisinkjetspecificself-containedunitisdesignedaround an all polypropylene construction with no binding agents, to give low extractables and ensure completecompatibilitywithvolatileinkjetbasedsolvents.
Easeoffittingandextendedfilterlifespanallowformaximumup-time.
Specifications
Filter Code8096
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural
Micron Rating0.5µm,1µm,3µm,5µm,10µm,20µm,40µmand60µm(additionalratingsavailableonrequest)
DimensionsFilterdiameter: 77mm(3.02”) Filterheight: 47mm(1.85”)(plusconnectors)
Filter Area500cm2 (77.5in2)
ConnectorsJaco: ¼”Jaco® 6mmJaco® CPC: CPC
Maximum Operating Pressure<6.5bar(94psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
Flow Rate
MicroprintTM Capsule Filters
113
DISPOSABLE CAPSULE FILTERS
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
24
12
9
0200 600 800 1000
Diff
ere
ntia
l Pre
ssur
e (
mb
arg
)
Flow (ml/min)
0 400
15
21
18
6
3
0.13
0.35
0.30
0.26
0.22
0.17
0.09
0.04
0
Pre
ssur
e (
psi)
10µm
5µm
3µm
1µm
20µm
115
Mic
roje
t™ M
ain
Sys
tem
Filt
ers
Disp
osableCapsuleFiltersfo
rInkjetFiltration
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
114
Ordering Information: Fororderinginformationpleasegotopage176-177.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
This main system filter is specifically designed for the requirement of the wide and superwide format graphics printer market.
Theinkjetspecificself-containedunitisdesignedaround an all polypropylene construction, with no binding agents, to give low extractables and ensure 100%compatibilitywithinkjetfluids.ThesefiltersaresuitableforsolventorUVinksystems.
Specifications
Filter Code8131
Materials of ManufactureFiltermedia: Polypropylene Housingmaterial: Polypropylene Housingcolour: Opaqueblackandnatural
Micron Rating5µm,10µm
DimensionsFilterlength: 100mm(3.94”)(plusconnectors) Filterwidth: 27mm(1.06”)
Filter Area500cm2 (77.5in2)
ConnectorsLuer / hose barb
Maximum Operating Pressure6bar(87psi)
Operating TemperatureFrom0ºCto50ºC(32ºFto122ºF)
MicrojetTM MainSystemFilters
DISPOSABLE CAPSULE FILTERS
117
Porvair Filtration Group manufacture a range of media and materials for fluidisation and powder handling units.
ThethreetypesofmaterialsthatareidealfortheseapplicationsareSinterflo®Psinteredmetalpowder,Sinterflo®MporoussinteredmeshandVyon® sintered porous plastic.
Thesematerialsareextremelystrongandfreestandingandcanbefabricatedintoshapesascomplexasfluidisingconesforuseinsilos,forexample.
ThematerialtechnologiesthatPorvair can bring to powder handling represents one of the largest selectionscurrentlyavailablefromanysinglemanufacturer.
117
Fluidisation and Powder Handling Units
For applications requiring localised fluidisation and aeration or for retrofitting into existing silos or hoppers, the Sinterflo® P aeration units can offer a simple ready-made solution to powder handling problems.
Fluidisationistheintroductionofacompressedgas,viaporousmedia,intoabulkpowder,toenablethepowdertobehavelikealiquidforeaseofmovement.
Ingeneral,thesmallerthepowderparticlesize,themorecohesiveitbecomesandthemoredifficultitistomove.WithPorvair’s extensiverangeoffluidisingmedia,wecantailoranoptimalsolutionstosolvemostfluidisationchallenges.
Availableinvarioussizes,Sinterflo® units introduce low pressurefluidisingairintothematerialatorbeforeitspointofexitormovement.
Typical Applications
Sinterflo®Psinteredmetalpowderaerationpadscan be used where tolerance of high operating temperaturesofupto600ºC(1,112ºF)andhighcorrosion resistance is required.
• Localisedfluidisation
• Silo construction
• Gypsumandflyashaerationordrying
Features and Benefits
• High operating temperatures Upto600ºC(1,112ºF).
• High corrosion resistance
• Easy installation Aerationpadscompletewithcompressedairsupply adapter with BSP thread.
• Multiple sizes available Idealforretrofittingintoexistinghoppersorsilosthathavefailedtoperformeffectively.
Sinterflo® P Metal Powder Aeration Units for Powder Handling
119118
Sinterflo® P Stainless Steel Aeration Unit
StainlesssteelSinterflo®unitshavebeenspecificallydesignedforuseinthefoodandpharmaceuticalindustriesandwhereresistancetochemicalattackorhightemperature(upto600ºC(1,112ºF))isrequired.
Sinterflo® P Bronze Aeration Unit
Availableassheetsupto600mm(23.62”)longand350mm(13.78”)wideorasafinishedunitasillustratedbelow,theSinterflo®Bronzesheetandaerationunitexhibits excellent strength and rigidity, and can be usedinhighertemperatureapplications(upto300ºC(572ºF))suchasconveyorsandairslidesforhotflyashandgypsumpowders.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® P
Me
tal P
ow
de
r Ae
ratio
n U
nits
Flu
idisa
tion
an
d P
ow
de
r Ha
nd
ling
Un
its
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
FLUIDISATION AND POWDER HANDLING UNITS
Sinterflo® MC Fluidising Media, multi-layered, diffusion-bonded stainless steel mesh is available in 316L and other alloys. This precision fluidising media is available in both Lo Flow and Hi Flow rates, to meet your application requirements.
Usuallyavailableinstock,forimmediatedelivery,themediaissuppliedasflat-panels,uptoaseamlesssizeof100cmx150cm(40”x60”),andinanunlimitedsizein butt-welded sheets.
Porvair Filtration Groupprovidecompletefabricationservicesforthismaterial,includingcustomsizes,shapes,mountingholesandweldingtoendfittingsorrings.Wecanalsofabricateintotubesorfluidisationconesforhopperbottoms.
Forfluidisingapplicationswhereatightlycontrolledefficiencyratingisrequired,Porvair Filtration Group canprovideaprecisionfinefiltermesh(downto2micronsnominal)sinteredtothefluidisingmedia.Thisis particularly useful in reducing particulate bypass, cloggingandwhenfluidisinggasisnotflowingconstantly.
Sinterflo®MCfluidisingmediaisparticularlysuitedtodemandingapplicationswherehighoperatingtemperaturesofupto540ºC(1,000ºF),increasedchemicalorhighabrasionresistanceisessential,suchassilodischargecones,fluidisedreactorsandfluidiseddryers.
Thismaterialiseasilycustomengineeredtomeetrequiredspecificationsofmaterials,strength,flowrequirements,thickness,micronratingandenvironment.
Typical Applications
• Fluidising beds
• Fluidised gravity conveyors
• Fluidised hoppers
• Gas spargers
Features and Benefits
• High operating temperatures.
• Robust and self supporting.
Fabricated shapes usually do not require complexandexpensivesupportstructuresor joiningstrips.
• Application and material versatility.
• Enhanced chemical resistance.
Canbeconstructedfromawiderangeof materialsincluding304and316Lstainlesssteel, Hastelloy®, Inconel® and Monel®.
• Cleanability.
Awiderangeofcleaningmethodscanbeused; asaresultthemediacanbesterilizedforuse withinthefoodandpharmaceuticalindustries.
• Abrasion resistance.
Non-sheddingmedia,highlyresistantto mechanicalabrasion.
• Design and engineering versatility.
Easilycustomengineeredtomeet requiredspecificationsofmaterials,strength, flowrequirements,thickness,micronratingand environment.
Sinterflo® MC Fluidising Media for Powder Handling
121120
Typical Applications
Fluidised BedsIn this application air ispumpedthroughahorizontalorinclinedsectionofSinterflo® MCmediatherebylevitating a wide rangeofmaterialssuchasflour,cement,orpaintparticles.Theairinthisapplication can also be used for drying the product or insomecasesimpartingadditives.
Fluidised Gravity Conveyors In this application a secondflowofairisintroduced at a 90 degree angle to the fluidisingmediatomovetheproductforward for secondary processing (i.e. roasting)ortransportation.
Fluidized HoppersWhenformedinto conical shapes Sinterflo® MC mediawillprevent‘bridging’ of particles/powders and increase the speed of discharge. This is especially critical in the unloading of railcars.
Gas Spargers Whensubmergedinaliquidenvironmentthe air passed through Sinterflo®MCmediawillcreateafinebubblefieldthataidsmoreefficientoxygenation.This process is used in the electro-plating, fermentationandwatertreatmentindustries.
Specifications
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® M
C F
luid
isin
g M
ed
iaFl
uid
isatio
n a
nd
Po
wd
er H
an
dlin
g U
nits
2
1
Diff
ere
ntia
l Pre
ssur
e (
inc
he
s o
f H20
)
SCFM/ft2
3
45
10
20
30
4050
100
50000 10050105 500 1000
360206-400
360206-200
360102-50
360102-25
360206-999
360206-600
360102-10
360102-4
Hi FlowLo Flow
FSLA-10
FSLA-4
FSLA-50
FSLA-25
FSHA-400
FSHA-200
FSHA-999
FSHA-600
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
FLUIDISATION AND POWDER HANDLING UNITS
Grade Airflow Nominal Thickness (SCFM/ft2@2inofH20) mm(in)
Grade Airflow Nominal Thickness (SCFM/ft2@6inofH20) mm(in)
FSLA Standard Lo Flow Fluidizing Media Grades
FSHA Standard Hi Flow Fluidizing Media Grades
FSLA-0005 5 1.37mm(0.054")
FSLA-0010 10 1.47mm(0.058")
FSLA-0025 25 1.57mm(0.062")
FSLA-0050 50 1.65mm(0.065")
FSHA-0200 200 1.02mm(0.040")
FSHA-0400 400 1.19mm(0.047")
FSHA-0600 600 1.32mm(0.052")
FSHA-1000 1000 1.63mm(0.064")
Our Vyon® porous media is manufactured from USP Class VI approved HDPE or PP materials, making it particularly suitable for both food and pharmaceutical applications. It has a uniform pore structure giving an even total area fluidisation. It is self-supporting due to its semi-rigid nature, thereby reducing the need for the external support structures that are required with canvas and felt media.
Thismaterialcanbesuppliedasareadyfabricatedfluidisingconelinerorinflatsheetform,1000mmx750mm(40”x30”),foruseasatanklinerorinanenduser secondary fabrication.
Vyon®porouspolymersarethemosteconomicalchoicewheretemperaturesareintherangeof-70°Cto80°C(-94°Fto176°F).
Vyon®isfullycleanableformultiplere-uses,however,itsaffordabilitycomparedtostainlesssteelmaypermitmorefrequentreplacementwhereadisposalfabrication is preferred to cleaning.
Typical Applications
Food and pharmaceutical • Sugar
• Flour
• Milkpowder
• Paracetamol
• Vitamins
Industrial and construction • Cement
• Gypsum
• Soda/flyash
• Coal dust
Chemical and plastics • Titaniumdioxide
• Carbonblack
• Calciumcarbonate
• Polyethylene powder
• Epoxy and polyester paint powders
Features and Benefits
• Light weight and self supporting.
• Evenairflow.
• Nonfibreshedding.
• Low extractables.
• Naturally hydrophobic.
• Chemicallyinert.
• Material versatility.
• Easy to clean.
Vyon® Porous Polymer Fluidising Media for Powder Handling
123122
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® P
oro
us P
oly
me
r Flu
idis
ing
Me
dia
Flu
idisa
tion
an
d P
ow
de
r Ha
nd
ling
Un
its
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Specifications
Mean Pore Size12-16µm
Air Flow at 10mbar2-3M3/min/M2 (71ft3/min/ft2)
Removal Efficiency (Air)6µm
Elongation at Break10%
Tensile Strength70kgf/cm2(12.8lbf-ft)
Temperature Range*-70°Cto+110°C*(-92°Fto230°F)
* Depending on material type
FLUIDISATION AND POWDER HANDLING UNITS
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Typical Applications
Gravity discharge
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Anti-bridging and aeration pads
Air assisted gravity conveying
Solidsdischarge
Fluidisedarea
Solidsdischarge
Fluidised powdercompartment
Air compartment
Plenumarea
Air
Air
Air
Plenumchamber
Fluidbed
Air
Plenumchamber
Dip coating
125
Porvair Filtration Group manufacture a range of flow control units for the process industries. Using both metallic and polymeric materials, Porvair’s flow control units are suitable for air, gas and liquid applications.
Many specialised applications have been developed totakeadvantageoftheuniquecharacteristicsofporousmaterials.Applicationssuchasfiltration,flowcontrol,flamearrestorsandself-lubricatingbearingsaresomeofthelargestcommercialapplications.
Porvair’s porous technology offers a cost-effective solution to diverse engineering challenges in the industrialmarketplace.
Porvair’s rangeofflowcontrolunitspresenttheapplicationwithmultiplebenefits,including:highcorrosionresistance,applicationandmaterialversatility, abrasion resistance and design and engineeringflexibility.
125
Flow Control Units
Sinterflo® MC multi-layered, diffusion-bonded, stainless steel mesh is available in 316L and other alloys. This precision filter mesh, also known as a porous plate, is available in a range of different pore sizes ranging from 2 to 100 micron in diameter.
Porvair Filtration GroupfabricateSinterflo® MC sintered meshinastandardflatplateformat,uptoaseamlesssizeof1,000mmx1,500mm(40”x60”)andanunlimitedsizeinbutt-weldedsheets.
Thismaterialiseasilycustomengineeredfornon-standardapplicationsandcanbeformedintotubesandsmalldiscsorlargescalecircularplates.
Sinterflo® MC Filter Plates are particularly well suited todemandingapplicationswherehighoperatingtemperaturesupto540ºC(1,000ºF),increasedchemicalresistanceand/orhighabrasionresistanceisessential.Theseapplicationsincludeflamearrestors,nutschefilterplatesandpolymermeltfilters.
Typical Applications
• Wellwaterfiltrationforcropirrigation
• Sandfiltrationinoffshoreoilandgasrecovery
• Seawaterfiltrationindesalinationplants
• Marinelifefiltrationfromballastwater
Features and Benefits
• Highoperatingtemperatures.
• Robust and self supporting.
• Applicationandmaterialversatility.
• Enhancedchemicalresistance.
• Cleanability.
• Abrasion resistance.
• Design and engineering versatility.
Sinterflo® MC Filter PlatesMetalCompositeFilterPlates
127
Sint
erfl
o® M
C M
eta
l Co
mp
osi
te F
ilte
r Pla
tes
Flo
w C
on
tro
l Un
its
126
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
FLOW CONTROL UNITSCONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Specifications
Sinterflo® MC Filter Plate Configuration
Protective Guard Layer
Filtration Layer
Distribution Layer
Support Layer
Support Layer
1
2
3
4
5
2 3 4 51
Grade Nominal Partical Control Nominal Rating Mesh Thickness (microns) (wires per inch) (inch(mm))
PSA-0005 5 325 x 2300 0.066"(1.68mm)
PSA-0010 10 200 x 1400 0.066"(1.68mm)
PSA-0015 15 165 x 1400 0.066"(1.68mm)
PSA-0020 20 165 x 800 0.069"(1.75mm)
PSA-0040 40 325 x 325 0.073"(1.85mm)
PSA-0075 75 250 x 250 0.074"(1.88mm)
PSA-0100 100 150 x 150 0.074"(1.88mm)
Standard Filter Plate Grades
0
Diff
ere
ntia
l Pre
ssur
e (
pa
sca
ls)
Flow Rate (cfm)
250
500
750
1000
1250
1500
1750
2000
5000 20015010050 250 450
360206-400
360206-200
360102-50
360102-25
360206-999
360206-600
360102-10
360102-4
PSA-010
PSA-005
PSA-020
PSA-015
PSA-075
PSA-040 PSA-100
400350300
Flow Versus Pressure Drop
129128
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Caribou Division Tel:+44(0)1978661144 Tel:+18606755000 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Flo
w R
est
ricto
rs, B
atte
ry V
ent
s a
nd F
lam
e A
rre
sto
rsFl
ow
Co
ntr
ol U
nits
Restrictive Flow Products (RFP) are restrictive flow orifices with a single opening or sintered metal flow restrictors with hundreds of small, micron sized passageways. These are flow limiting devices used to prevent an uncontrolled flow of high purity semiconductor process gases.
Flowlimitingdevicesareinstalledincompressedgassupplysystemsoringasdistributionmanifoldstocontrolahighgasflowspike.Unintentionalhighgasflowmaybecausedbytheruptureofagassupplyline,amalfunctioningvalveorthefailureofapressureregulator.
OurSinterflo® Sintered Metal Flow Restrictors are highly reliable,lowcost,flowcontrolpartsthatwillprovideaquickreturnoninvestmentforarangeofapplications.
Thesecanbemanufacturedfrom316LStainlessSteel,Nickel,Hastelloy® C22, Hastelloy® C276 and other temperatureandcorrosionresistantmaterials.
Semiconductor Industry, Building and Fire Code ComplianceRFP’scanassistincomplyingwithSEMIS5-0310SafetyGuidelinesforSizingandIdentifyingFlowLimitingDevices for Gas Cylinder Valves, NFPA 318 Standard forProtectionofSemiconductorFabricationFacilities,CGA G-13 Storage and Handling of Silane and other gas safety standards.
Flow Range1to60,000sccmN2@30psigequivalent,calibratedto+/-7.5%flowtolerancetypically,butcanbeofferedaslowas+/-1%onrequest.Standardproductscanbeusedinafullvacuumandinpressuresupto150psig.Customdesignedproductscanbemanufacturedtowithstand pressures up to 3000psig.
Typical Applications
• Improvedgassafetymanagement
• Costreductionofexhaustventingsystems
• Tamperproofflowcontrol
• Replacementofneedlevalvesandmassflowcontrollers
• Laminarflowdiffusers
• Pressure snubbers
• Flamearrestors
Features and Benefits
• Fitting Connections 10Raorbetter,electropolishedhardwaremadefrom316LStainlessSteelVAR,Nickel,Hastelloy® C22, Hastelloy®C276andothertemperatureandcorrosionresistantmaterials.
• Test Gases CleanDryAir,Nitrogen,Hydrogen,Helium,Argonand CO2arecommonlyused.OtherGasessuchasAsH3, Br2, BF3, CCl4, C2H2, CH4, Cl2, NF3, NH3, PH3, SF6 and SiH4canbecorrelatedtoanequivalentN2flowusing viscosity conversions.
• Class 100 Clean Room Processing Particlefree,chemicallyclean,organicfreehandlingandbaggingofRFP’sforout-of-packagecleanliness. No particle shedding and dried to less than10ppbmoisture.Organicslessthan10ppbTHCandHeliumleakcheckedtogreaterthan 1x10-9sccm/second.
Sinterflo® P Flow RestrictorsRestrictive Flow Products and Sintered Metal Flow Restrictors
Porvair Filtration Group manufacture a wide range of flame arrestors from sintered metal powder and porous plastics.
Porvair’ssinteredmetalflamearrestorsareusedinmanyprocessinstrumentandanalyticalinstrumentapplications as safety devices for handling combustiblegasesforgasanalysers.
Thehighthermalconductivityoftheseflamearrestorcoolstheflamefrontorcombustionwavebyabsorbinganddissipatingtheheatoftheflame.
Porvair sinteredmetalpowderflamearrestorscomplywiththeATEXDirectiveandtheassociatedInternationalStandardsOrganization(ISO)testingguidelines:
• ISO4003ÆDeterminationofBubblePointPore SizeinPorousSinteredMetal.
• ISO4022ÆDeterminationofPermeability.
• ISO2738ÆDeterminationofDensityinporous materials.
Porvair Filtration Group’s Porvent porous plastic batteryventsaremanufacturedfromVyon®, in either polyethyleneorpolypropylene.Theycanbeusedfor:flamearresting,separationandoptimumventing.
Porvair’sflamearrestorscanbemadeintothefollowingformats:
• Cutshapes,mouldings,mouldeddiscsorplugs.
• Moulded cylinders with or without housings, end caps or threads.
• Moulded discs or plugs sintered directly into stainless steel sensor housings.
• Complexshapescontainingboththreadsand end caps.
Typical Applications
• Flamearresting
• Ignitionpreventioninfluegasstacks
• Explosion proof enclosure venting
• Flashbackpreventionforweldingtorches
• Battery vents
• Sensor protection
Features and Benefits
• Excellentflame-arrestingpropertiesdueto tortuous path within the sintered porous materials.
• Optimumflowofgases.Thecontrolledporesizeanduniformdensityensureanevenflowofgasto the sensor device.
• Forsoundsystemssuchasloudspeakers,the stainlesssteelmeshhasexcellentflame-arresting properties, but with reduced sound attenuation.
• Robustandeasytoassemble.
• Our products undergo SPC inspection and conformtoalltheleadingtestauthoritiessuchas EECS, UL, FM, CAS and BASEEFA.
Battery Vents and Flame Arrestorsfor Process and Analytical InstrumentApplications
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
FLOW CONTROL UNITS
Porvair Filtration Group manufacture a wide range of Sinterflo® P porous sintered stainless steel powder cylinders.
Thesecylindersareusedforfabricationintofiltersforapplicationsinaggressiveenvironments.
Made by isostatic pressing, these cylinders have noseamweld,leadingtouniformfiltrationandlesscorrosion.
OthermaterialssuchasMonel®, Hastelloy® and Inconel® are also available.
Typical Applications
Gas Filtration • Highly aggressive gasses
Steam Filtration • Breweries
• Chemicals
• Dairies
• Food and beverage
• Pharmaceuticals
Liquid Filtration • Chemicals
• Food and beverage
• Pharmaceuticalsandcosmetics
• Solvents
Features and Benefits
• Withstandamaximumdifferentialpressureofupto4.9bar(71psi)andanoperatingtemperatureof-51ºCto204ºC(-60ºFto399ºF).
• High dirt holding capacity.
• Easilyre-cleanable,allowingforlongfilterlifeandreduced operating costs.
Sinterflo® P Porous Powder CylindersforGas,SteamandLiquid
131130
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o P
Po
rous
Po
wd
er C
ylin
de
rsFl
ow
Co
ntr
ol U
nits
Standard Sizes for Sinterflo® P Stainless Steel Cylinders
Forsizerequiredspecify:outsidediameterxinsidediameterxlength.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
StainlessSteel Gas,Air,Steam Liquid OD ID Length WallThicknessGrade (µm) (µm) (mm) (mm) (mm)
* Other grades of stainless steel powders and lengths and diameters are available.
10 1 6 34 28 75 3
20 5 15 34 28 75 3
40 25 30 34 28 75 3
10 1 6 34 28 100 3
30 5 25 34 28 100 3
40 25 30 34 28 100 3
10 1 6 44 38 500 3
30 5 15 44 38 500 3
40 25 30 44 38 500 3
10 1 6 54 48 530 3
30 5 15 54 48 530 3
40 25 30 54 48 530 3
10 1 6 76 70 760 3
30 5 15 76 70 760 3
40 25 30 130 124 760 3
10 1 6 130 124 760 3
30 5 15 130 124 760 3
40 25 30 130 124 760 3
FLOW CONTROL UNITS
Porvairofferacompleterangeofporousmaterialsforgas/ liquid contact applications across a variety of industries,including:
• Food and beverage
• Wasteandwatertreatment
• Chemicalprocess
• Pharmaceuticals
Asamanufacturerofporousmediaandelements,weareabletospecify,designandmanufacturethemostefficientproductforagivenapplication.
Thekeytoefficientgastransferistogenerateveryhighvolumesoffinebubbles.Ithasbeenshownthata1mm(0.04”)bubblehas6timesthegas/liquidcontactthanthatofa6mm(0.24”)bubble.Therefore,werecognisethatbubblesizeisessentialtooptimisemasstransferandreducegasconsumptionandenergycosts.
ElementsareavailableinSinterflo® sintered porous stainless steel or Vyon® sintered porous polyethylene or Polypropylene.
Stainless steel spargers are supplied in stainless 316L and higher alloys such as Inconel® and Hastelloy® for veryaggressiveapplications.Beingmanufacturedfromsuchresistantmaterials,Porvair spargers are cleanable andifnecessaryheatorsteamsterilisable.
Theelementsaredesignedandmanufacturedfromuniform,fine,controlledporesizemediatoachieveexcellentperformanceinthedistributionofalargenumberofsmallgasbubblesforahigherinterfacialarea.
Typical Applications
Intrusiveandnon-intrusivetangentialpipelinespargers:
• Forthetreatmentofwastewater
• Volatile stripping
• Steaminjection
Tankspargers:
• Fermentation
• Agitation
• Bioremediation
• Oxygen stripping
• De-watering
• Dissolvedairflotationprocessesusedbymajoroilcompanies
Features and Benefits
• Rugged,fixedporemedia.
• Bubblesizecanbecontrolledbyawiderangeofavailablemediaporesizes.
• Temperatureandcorrosionresistantmaterialsofconstruction.
• High quality, all-welded, robust construction.
• Higherdiffusionratesfromsmallerspargingelements.
• Cleanable.
• Spargerdiameterandconnectordesignedtomeetapplicationrequirements.
Spargersfor Liquid and Gas Contact Applications
133132
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Caribou Division Tel:+44(0)1978661144 Tel:+18606755000 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
FLOW CONTROL UNITSCONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Poro
us C
ups,
Bus
hing
s a
nd S
pa
rge
rsFl
ow
Co
ntr
ol U
nits
Porvair Filtration Group manufacture a wide range of cups and bushings for the process and industrial markets.
Poroussinteredmetalcupsandbushingsprovideadditionalporoussurfaceareaforlongerfilterservicelifeorforincreasedpermeabilitywhencomparedtoporoussinteredmetaldiscsofthesamediameter.
Forthebestporesizeuniformityandquality,poroussinteredcupsandbushingsarerecommendedwhenthelengthtodiameterratioislessthan3:1.
Whenthelengthtodiameterratioofapartismorethan3:1,thenaporoussinteredmetaltubeisthepreferredoptionforthebestporesizeuniformity.
Typical Applications
• Filters
• Aerators
Features and Benefits
• Large surface area.
• Increasedpermeability.
• Highoperatingtemperatures.
Porous Cups and Bushings
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Vyon® is a porous permeable plastic material made from high density polyethylene by a modern powder sintering process.
The Vyon® silencer is a sintered polyethylene body mouldedtoahighdensitypolyethyleneadapter.
The silencer screws directly into the exhaust port of a control valve. The exhausting air escapes to the atmospherebyexpandingthroughtheporousbody.
Thenoisefromasingleunsilencedexhaustportisreducedfromabout90decibelstobetween60and70decibelswhenfittedwithaVyon® silencer. 90 decibels correspondstothenoiseproducedbyaheavytruckor underground train passing at a distance of a few feetandrepresentstheacknowledgeddangerlevelto which people should not be exposed for any length oftime.Bycomparison,60decibelscorrespondstonormalconversationatadistanceof1metre(3feet).
Vyon®silencersareavailabletopneumaticequipmentmanufacturersinourexclusivegreybody/blackadaptorcolourcombinationdirectfromPorvair Filtration Group.
Typical Applications
• Silencing
• Filtrationforpneumaticequipment
• Sound attenuation
Features and Benefits
• Significant noise reduction
Up to 30 decibels, the difference between an undergroundtrainandnormalconversation.
• Easy installation
Our silencers are available with BSP thread connections.Theyscrewdirectlyinto,andmustalwaysmatchthesizeoftheexhaustport.
• Operating conditions
Forapplicationonsystemswithworkingpressuresupto10bar(150psi).
• Minimal flow loss
Effectivelyzeroinavastnumberofapplications.
• Minimal maintenance costs
Elementscanbecleanedandreused,reducingreplacementandmaintenancecosts.
• Maintenance free
Our silencers are unaffected by water or oil. They shouldnotbeallowedtobecomeblockedorblinded with debris.
Vyon® SilencersPneumaticEquipmentSilencing
135134
Specifications
Materials of ManufactureBody: Vyon® Sintered porous HDPE Adaptor: InjectionmouldedsolidHDPE
FittingBSP(BritishStandardPipe)
Fitting Guide
Maximum Working Pressure10bar(150psi)
Noise ReductionUp to 30dB
Operating Temperature Range-70°Cto+80°C(-94°Fto176°F)
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
FLOW CONTROL UNITSCONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® S
ilenc
ers
Flo
w C
on
tro
l Un
its
Full
He
igh
t
Bod
y H
eig
ht
Width
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
Fittingsize FullHeight BodyHeight Width (Inches) (mm) (mm) (mm)
″" 35.5(1.36") 27.8(1.09") 12.9(0.51")
¼" 42.6(1.68") 35.7(1.04") 16.6(0.65")
″" 67.5(2.66") 57.4(2.26") 24.4(0.96")
½" 78.5(3.09") 68(2.68") 24.8(0.98")
¾" 139.8(5.5") 124.8(4.91") 37.6(1.14")
1" 154(6.06") 135.5(5.33") 47.8(1.22")
1" 115(4.53") 95.6(3.76") 47.8(1.88")
137
Porvair Filtration Group have a range of diffused aeration products for the treatment of both industrial and municipal effluent.
Supportedbyastrongresearchanddevelopmentteam,thetechnicalexpertiseandcapabilityofPorvair Filtration Group ensures that we are at the forefront of cleanwaterfiltertechnology,enablingustodelivercost effective, reliable clean water solutions tailored to ourcustomersrequirements.
Aerationisaneffectivemethodforbreakingdowntheorganiccomponentsofeffluents.Sewageaerationsystemshavetwofunctions:
• To provide oxygen to feed the oxygen breathing aerobicbacteriathatdecomposesorganicmatter.
• Tostirtheeffluenttoensurethatitishomogeneousforefficientoxygenation.
Our diffused aeration products have been designed to optimisethesefunctionsandprovide:
• Easyfittingintonewinstallations.
• Easyretrofittingintoexistinginstallations.
• Highoxygentransferefficiency.
• Low operating costs.
• Lowmaintenancecosts.
Included in the range are both BioVyonTM sintered porouspolyethyleneandEPDMmembraneproducts:
• Vyon® disc diffusers
• Vyon® tubular diffusers
137
Disposable Diffused Aeration UnitsforWaterTreatment
The reliable Vyon® porous polyethylene disc diffusers, supplied by Porvair Filtration Group, are used in the breaking down of pollutants in sewage and industrial waste water, by the highly efficient transfer of oxygenated air.
Porvair Filtration Group porous polyethylene disc diffusersareavailableinarangeofporesizesandpermeabilities,ensuringacorrectmatchtoexactingcustomerprocessrequirements.ThisdiffuserisadirectreplacementfortheDegrémontTM230mm(9.05”)CeramicDisc.
Our diffusers can be supplied as disc only, with or withoutseal,orasacompletediffuserassembly,withtheabilitytobeeasilyretrofittedintoexistinginstallations.
Typical Applications
• Watertreatment
Features and Benefits
• Highoxygentransferefficiency.
• Low operating costs.
• Lowbackpressure.
• Resistanttochemicalattack.
• Easilyretrofittedtoexistinginstallations.
• Lightweightandresistanttodamage.
Specifications
Materials of ManufactureDisc: HighDensity
Polyethylene
Gasket: WastewaterapprovedEPDM
Fixings: StainlesssteelringandRilsan® Coated Clips
Technical InformationDiameter: 230mm(9.05”)
WallThickness: 6mm(0.24”)
Weight: 0.38kg(2.2lb)nom.
BubbleSize: 2-4mm(0.08”-0.16”)
RecommendedAirFlow: 1-5m2 (10.8 - 53.8ft2)/hr/diffuser
Vyon® Disc Diffusers High Density Polyethylene Disc Diffusers
139138
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
DISPOSABLE DIFFUSED AERATION UNITSCONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® D
isc
and
Tub
ula
r Diff
use
rsDisp
osableDiffusedAerationUnitsfo
rWaterTreatm
ent
Porvair Filtration Group manufacture a range of thigh density polyethylene tubular diffusers. These are made with regulatory approved materials for potable water applications.
Porvair’s tubular diffusers can be used over a large pH range,arehighlychemicalresistantandcanbeusedforavarietyoforganicchemicals,acidsandalkalis.
Theycanbecustommadeinavarietyofdiametersand lengths. They are highly robust and produce uniformbubblesizeandpatterntoensureeffectiveoxygenation and long service life.
The tubular diffusers are produced over a large range ofefficienciesforeffectiveparticleremoval.
Typical Applications
• Watertreatment
• Potablewaterfiltration
• Ponds
• Rivers
• Fishfarms
Features and Benefits
• Robust and rigid.
Specifications
Materials of ManufactureTube: HighDensity
Polyethylene(HDPE)
Adapter: HighDensityPolyethylene(HDPE)
Gasket: EDPM
Technical InformationApproximateWeight: 0.3kg(0.7lb)per500mm
(19.67”)diffuser
DryPermeability: 94m3(24,832gal)/hr/500mmdiffuser@15mbar(218psi)Δp
Diffusersurfacearea: 0.1175m2 (1.26ft2)for500mm(19.67”)diffuser
Designpressure: 10-90kPa(0.1-0.9bar)
Designtemperature: 1oC to 50oC (34oF to 122oF)
TypicalSOTE%/mdepth: 6.8%
Vyon® Tubular DiffusersHigh Density Polyethylene Tubular Diffusers
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team. Please note, this product is custom made to meet specific project
requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
141
Porvair continues to research new materials for filtration and separation. Examples are the development of metallic membranes or the use of specialist surface modification, to provide chemical or physical properties that are beneficial to the separation activity or the longevity of the filtration equipment.
Porvair Filtration Group currentlymanufacturesthespecialityproductStabifilTM,tocomplimentitscapabilityinthefoodandbeverageprocessingmarket.
This product has been developed as a unique technology that is at the interface of Porvair’sfiltrationandporousmaterialtechnology.
141
Speciality Products
StabifilTM has been developed as a unique technology that is at the interface of Porvair’s filtration and porous material technology. The unique manufacturing process allows contact between the adsorbent and the beverage to be at its optimal.
Theproductcanbemanufacturedintheformatofafiltercartridgeandwillfitintomostindustrystandardhousingsusedinthefoodandbeveragesindustry;thusprovidinganeconomicmeansbywhichthestabilisation process can be integrated into the processing of beverages.
StabifilTMishighlyflexibleduetotherobustnessofthecompositematerial,whichenablesittobetobeeasily incorporated into any process where beverage stabilisation is required.
Typical Applications
• Beer and wine stabilisation
• Spirits
• Vinegar
• Fruitjuice
• Purewatersupplysystems
Features and Benefits
• Highlyefficient.
• Easy regeneration.
• Robust characteristics.
• Clean and safe process.
• Rapidreplacement.
• Flexibleanddynamicstabilisation.
• Capacityiseasilyincreasedatminimalcost.
• Accurate and reproducible.
• Minimallossofbeverageinadsorbentmedia.
• Lowcapitalcostandinvestment.
StabifilTM for the Stabilisation of Beverages
143
Sta
bifi
lTM fo
r the
Sta
bili
satio
n o
f Be
vera
ge
sSp
ec
ialit
y Pr
od
uc
ts
142
Specifications
Cartridge ConstructionStabifilTMcartridgesareconstructedfrommaterialsproventobenon-toxicandmeetinternationallegislation including EC10/2011 for food contact, USP VI and FDA CFR Title 21.
The cartridges are built using technology that is unique to Porvair’sfiltercartridgesandporouspolymers.
No glues or resins are used to bond the adsorbent, polymerorcartridgehardware.
Product EvaluationBelow is a chart showing tannoid reduction of a selection of beers dosed at an equivalent of 25g/hl of adsorbent.
AnumberofdifferenttypesofbeerswereprocessedthroughascaleddownStabifilTMfiltercomprisedofa PorvairS-typefiltermodule.Aspecificflowrateof
20hl/hr/m2wasused,withacontacttimebetweentheadsorbentandbeerofjust12seconds.Thebeerwasprocessedwithin20minutesandrapidlyregeneratedin situ with caustic cleaning followed by a phosphoric acid wash.
A17-foldregenerationoftheStabifilTM cartridge indicatednolossofstabilisationeffect;furthermore,nopowder was present in any of the processed beer.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
SPECIALITY PRODUCTSCONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
60
Fresh 1 2 3 4 5 6 7 8 9 10 11 12 13 17
Redu
ctio
n of
Tann
oids
(%)
Regeneration Number
50
40
30
20
10
0161514
Blonde Beer 1 Blonde Beer 2 India Pale Ale Blonde Beer 1 Dark Beer
145
Porvair Filtration Group manufacture a range of auxiliary products to provide supplementary system support.
Forexample,differentialpressureindicators(DPI’s)provide indication of increasing differential pressure, filterblockageorby-passbybothvisualandelectricalsignal.
The DPI can also be set to provide a signal of decreasingdifferentialpressureinthesystemandinsomeinstancesthatthesystemhasbeenoperated.
These are lightweight, robust and reliable for use in hydraulic,fuelandlubeoilsystems.
145
Auxiliary Products
Porvair Filtration Group manufacture a wide range of differential pressure indicators (DPI’s). Porvair DPI’s help protect critical aircraft systems, providing an indication of impending or actual blockage when the filter element has become blocked and requires maintenance or replacement.
Thesecomponentsfunctionbymonitoringthepressuredifferentialbetweentheupstreamanddownstreamofafilterelementtoprovideconditionmonitoringandprovideanalerttopotentiallydangeroussystemconditions,suchasdrasticflowrestrictions,filterelementdamage,lineblockageorupstreamreleaseofcontaminants.
Porvairindicatorsaredesignedandmanufacturedusing proven robust design techniques to ensure resistanceagainstthemostsevereofpressureandvibrationenvironments.
Indicationcanbebymeansofavisualorelectricaloutput,oracombinationofbothvariants.Visualindicationisprovidedbymeansofaredcolouredpop-upbuttonthatremainsintheactuatedpositionuntilmanuallyreset.Electricaloutputscanbeprovidedbyflyingleadorawidevarietyofstandardandbespokeelectricalconnectors.
Further to standard differential pressure indicators and dependentonspecificationrequirements,Porvair can incorporateadditionaldesignfeaturessuchas:
• Thermal lockout Preventing false actuations during expected high viscosity pressure conditions such as cold systemstart-up.
• Non-reset mechanisms RequiringremovaloftheDPIandaspecificorientation in order to reset, preventing a fail-safe against.
• Surge damping Providing resistance against false actuations duringinadvertentsystempressurespikes.
Typical Applications
• Fuel
• Lubricant
• Hydraulic
• Coolant
• Pneumatic
Features and Benefits
• Lightweight
• Robust structure
Options • Visual
• Electrical
Differential Pressure Indicatorsfor the Aerospace Industry
147146
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
AUXILIARY PRODUCTSCONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Diff
ere
ntia
l Pre
ssur
e In
dic
ato
rsA
uxi
liary
Pro
du
cts
Please note, this product is custom made to meet specific project requirements and cannot be ordered through this catalogue’s ordering guides. For further information, please contact a member of the Sales Team.
149
Porvair Filtration Group manufacture an extensive range of porous metal and polymeric materials to provide optimum solutions for a wide variety of applications.
ThesematerialscanbepurchasedforOEMproductsorbeintegratedandpackageintofinishedproducts.
Ourcorematerialsare:
• Sinterflo® sintered porous metal materials Mainlysinteredporousstainlesssteelandbronze materials,sinteredmetalfibreandmulti-layer stainlesssteelmeshes.
• Vyon® sintered porous plastic materials Mainly sintered porous polyethylene and polypropylenematerials.
• BioVyonTM sintered porous plastic materials Specialised Vyon®materialsmanufactured forapplicationsinthelifesciencemarkets.
Theapplicationsforthesematerialsinclude:
• Filtration,manyanddiverseapplicationsincludingair,water,steamandaggressivechemicals.
• Batteryventsandflamearrestorplugs.
• Flamearrestorsforgassensorprotection.
• Powderfluidisationandsolidshandling.
• Silencing.
• Vacuumtables.
• Sensor protection.
• Sparging.
• Fragranceemanationandchemicalcontrolledrelease.
• Solidphaseextractionandchromatography columnfrits.
• Medicaldevicefiltration.
149
Media and Materials
Manufactured from randomly laid metal fibres, sinter-bonded to form a uniform high porosity filter medium, Sinterflo® F demonstrates a significantly low pressure drop, high permeability and excellent dirt holding capacity.
Withthefeasibilitytoformulatemetalfibrestomeetspecificapplicationrequirements,combinedwithinherentdurability,sinteredmetalfibrefilterscanbecleanedinsituwithoutinterruptingprocessflowtherebyprovidingtheultimateinprocesseconomicsbyreducingdowntimetoaminimum.
Typical Applications
• Catalyst recovery and retention
• Gasification
• Chemicalproduction
• Ventfilters
• Agrochemicalapplications
• Liquidammonia
• Liquidandgaseousammonia
• Pharmaceuticalpowderrecovery
• Steamfiltration • CulinarySteam • ProcessSteam
Features and Benefits
• Resistant to high temperatures and corrosive environments. Suitableforaggressiveairandliquidfiltrationapplications.
• Can be cleaned in situ. Reducesdowntimetoaminimumprovidingexcellentprocesseconomics.
• Pleatable structure. Offers higher surface area with excellent dirt holdingcapacityforlongeron-streamlife.
• High void volume. Provideshighpermeabilitycombinedwithlowpressure drop.
Sinterflo® FSintered Metal Fibre
151150
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® S
inte
red
Po
rous
Me
tals
Me
dia
an
d M
ate
rials
A robust material manufactured from sinter-bonded metal powders. Primarily produced in 316L grade for use in temperatures up to 540ºC (1,004ºF), depending on process conditions, and offering resistance to most chemicals, Sinterflo® P media can also be produced in other grades of stainless steel and alloys such as Inconel®, Hastelloy® and Monel®.
Sinterflo®Ppowdermediacanbemanufacturedinbothdiscformatorincylinderformat.Forcylinders,ourisostaticpressingensuresgreatermediauniformitywithno welds, leading to increased corrosion resistance.
Typical Applications
• Catalyst recovery
• Polymermelt
• Gasification
• Chemicalproduction
• Slurry oils
• Steamfiltration • CulinarySteam • ProcessSteam
Features and Benefits
• Resistant to high temperatures and corrosive environments.
Suitableforaggressiveairandliquidfiltrationapplications.
• Strength and Robustness.
Ensuresreliabilityandlongeron-streamservicelife.
• Excellent media uniformity. Allowsconsistentfiltrationandeffectiveloading.
• Seamless structure. No welds provide increased corrosion resistance.
Sinterflo® PSintered Metal Powder
MEDIA AND MATERIALS
Porvair Filtration Group’s sintered metal mesh composite multi-layer precision filters are produced using a novel sintering process resulting in superior mechanically strong structures.
Primarilymadefrom316Lstainlesssteel,theyarealsoavailable in Inconel®, Hastelloy® and Monel®materialsforuseinthemostaggressiveenvironments.
Dependingonatmosphericconditions,ourstainlesssteeloptioncanbeusedintemperaturesupto540ºC(1,004ºF),withintermittentoperatingpeaksupto650ºC(1,202ºF),andareresistanttomostchemicals.
Formatsavailableincludeflatsheet,customshapes,welded cones and welded cylinders, and the materialscanbemanufacturedinavarietyoflayercombinationsdependingonyourspecificapplication.
Standardmaterialcombinationscanincludeperforated plates for additional support.
Sinterflo®MCisavailableinarangeoffiltrationgradesfrom2micron.
Typical Applications
• Powderfluidisation
• Liquid applications
• Slurry oils
• Steamfiltration • CulinarySteam • ProcessSteam
Features and Benefits
• Fabricated shapes without expensive support structures or joining strips. Offers robust and self-supporting structures.
• Can be cleaned repeatedly. Suitableforreuse;providinganeconomicalchoice.
• Non-shedding media. Providesresistancetomechanicalabrasion.
• Easily custom-engineered. Tomeetrequiredspecificationsofmaterials,strength,flowrequirements,thickness,micronratingandenvironment.
Sinterflo® MCSintered Metal Mesh Composite
153152
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Sint
erfl
o® S
inte
red
Po
rous
Me
tals
Me
dia
an
d M
ate
rials
Porvair Filtration Group manufacture precision woven meshes in various types of weaves from plain square mesh to Dutch (Hollander) Twill Weave to give the most defined absolute rating.
Plainsquareweaveforsimplesievingdutiesthroughvarious weave patterns (Reverse Plain Dutch, Broad MeshTwillandSinglePlainWeave)toDutchTwillWeavetoprovideforthemostcomprehensiveselectionofsurfacefiltrationduties.
Typical Applications
• Catalyst recovery and retention
• Gasification
• Chemicalproduction
• Ventfilters
• Agrochemicalapplications
• Liquidammonia
• Liquidandgaseousammonia
• Steamfiltration • CulinarySteam • ProcessSteam
Features and Benefits
• Goodpermeability.
• High tensile strength.
• Availablefromsinglewrapdesignsthroughtocomplexmulti-layeredstructuresinpleatedconstructionstooptimisetheareaavailable.
• Somemeshesavailableinadiffusionbondedversionstoincreasedperformancesecurityofporeshapeandsize.
• Availableinthebroadestrangeofporesizesofanyfiltermediatype.
• Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, 904L stainless steel, Inconel®, Hastelloy®, Monel® and Fecralloy® on request.
Sinterflo® MMetal Mesh
MEDIA AND MATERIALS
Our Vyon® sintered porous plastic materials offer excellent chemical compatibility, exceptional strength and are resistant to most acids, bases, many organic chemicals and temperatures up to 110ºC (230ºF).
Produced in both sintered porous polyethylene and polypropylene,materialsareavailablein:
• Roll
• Sheet
• Cut shapes
• Cones
• Mouldedformats
Typical Applications
• Domesticwaterfilters
• Activatedcarbonfilters
• Chemicalfilters
• Airanddustfilters
• Fluidisationandaerationofbulksolids
• Battery vents
• Pneumaticsilencers
• Waterandeffluentaeration
• Fragranceeminators
• Vacuumplatensandcones
• Vacuumholddowntablecovers
Features and Benefits
• Strong lightweight and self supporting Aversatilematerialthatcanbemanufacturedin avarietyofshapesandsizes. • Narrow controlled pore size distribution Averyefficientandeffectivefiltrationmaterial. • High and even porosity Lowpressuredropandevenflow. • Chemically inert Resistanttomanychemicalsmakingitsuitable formanyapplications.
Vyon®
Sintered Porous Plastics
155154
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Vyo
n® S
inte
red
Po
rous
Pla
stic
sM
ed
ia a
nd
Ma
teria
ls
MEDIA AND MATERIALS
All Vyon® grades are available in polyethylene. Only Vyon® D, F and HP grades are available in Polypropylene.
Name FiltrationGrades Liquids(µm)* Gases(µm)
Vyon® T 10 2
Vyon® M 6 1
Vyon® D 15 6
Vyon® F 35 10
Vyon® HP 70 30
Vyon® Material Range
Through a range of proprietry techniques, Porvair offer advanced BioVyonTMmaterialswithenhancedperformancetechniques.Belowareourmediagradesandthestandardandspecialisttreatedmaterialsavailable:
Vyon® Media Grades
Vyon™ HydrophobicOur hydrophobic VyonTMispermanentlytreatedtopreventthematerialfromwetting-outinmanyorganicsolvents.
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK: Tel: +44(0)1489864330 US: Tel: +18045501600 Email: info@porvairfiltration.com Email: infoUS@porvairfiltration.com
BioVyonTM Advanced Material Range
Through a range of proprietry techniques, Porvair offer advanced BioVyonTMmaterialswithenhancedperformancetechniques.Belowareourmediagradesandthestandardandspecialisttreatedmaterialsavailable:
BioVyonTM Media Grades
BioVyon™ UltracleanOur BioVyonTMrangeofstandardultracleanmaterialsare treated to exhibit very low extractables.
BioVyon™ NanocleanOur nanoclean BioVyonTM range offers a high purity materialwithtraceextractables.
BioVyon™ Hydrophobic and OleophobicOur hydrophobic or oleophobic BioVyonTM is permanentlytreatedtopreventthematerialfromwetting-outinmanyorganicsolvents.
BioVyon™ HydrophilicOur hydrophilic BioVyonTMmaterialispermanentlytreated for instant water wettability.
BioVyon™ LaminatesUsedasasupportformembranes,ourBioVyonTM laminatematerialextendsthefiltrationrangeto0.1µmfortheretentionofmicroorganisms.
BioVyon™ CompositesOur BioVyonTMcompositesincorporateactivesubstanceswithinthesinteredporousmaterial,suchaschromatographyresins,carbonandcellulosics.
B ioVyon™ FunctionalisedOurchemicallyorbiologicallyactivesinteredporousmaterialisfunctionalisedwithamines,carbonyls,carboxylicacids,linkerchainsorligands.
157156
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
Bio
Vyo
n™ S
inte
red
Po
rous
Pla
stic
sM
ed
ia a
nd
Ma
teria
ls
Porvair Filtration Group is a major manufacturer and developer of sintered porous materials, offering optimum solutions in a wide range of applications. Spearheading the porous polymeric materials is BioVyonTM, manufactured to high cleanliness standards to meet the demands of the Bioscience market.
BioVyonTM sintered porous polypropylene or polyethylene is available in rolls and sheets that arecuttosize,machinedtoshapeorfabricatedtomeettheexactingrequirementsofthediagnostic,biopharmaceuticalandhealthcareindustry.BioVyonTM polyethyleneisalsoavailableinamouldedformat.
OfferinghighvoidvolumesmakesBioVyonTM ideally suitedtowicking,emanationandapplicationsrequiringhighflowwithminimumhold-up.
Produced in both sintered porous polyethylene and polypropylene,materialsareavailablein:
• Roll
• Sheet
• Cut shapes
• Cones
• Mouldedformats
Quality Assurance
BioVyonTMhasbeentestedforbiocompatibilityandbio-safety to USP Class VI and is approved to FDA 21 CFR and EC-directives. Manufactured in an ISOCleanroomenvironmentinaccordancewithcGMP, BioVyonTM’ssuitabilitytomedicaldeviceshasbeendemonstratedthroughitsDrugMasterFilestatus. Registered to ISO 9001, Porvair Filtration Group proceduresaresubjectedtohighstandardsofquality.
Typical Applications
• Medicaldevicefiltration
• Personalhealthcareandpharmaceuticalvents • Diagnostics
• Catheter vents
• Antibodypurificationproducts
• Porouschromatography
• Samplepreparationforanalyticalchromatographyapplications
• Drug delivery products
Features and Benefits
Continuousmaterialdevelopmenthasresultedinaunique range of BioVyonTMmaterialseachexhibitingdifferent properties critical to these progressive markets.
BioVyon™Sintered Porous Plastics
Ordering Information: FororderinginformationpleasecontactamemberoftheSalesTeam.
Contact Information: UK, Wrexham Division US, Ashland Division Tel:+44(0)1978661144 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
MEDIA AND MATERIALS
Name FiltrationGrades Liquids(µm) Gases(µm)
BioVyonTM T 10 2
BioVyonTM M 6 1
BioVyonTM D 15 6
BioVyonTM F 35 10
BioVyonTM HP 70 30
159
Many of our standard products for the process industries can be ordered using the applicable ordering guides from this section of the catalogue. Please follow the step-by-step guide on each relevant page.
However,manyproductsarecustommadetomeetspecificprojectrequirementsandcannotbeorderedthrough this catalogue’s ordering guides. For further information,pleasecontactamemberoftheSalesTeam.
159
Ordering Guide
161160
CONTENTS INDEXORDERING INFORMATION ORDERING GUIDEPRODUCTSINTRODUCTION
Sint
erfl
o® M
eta
l Filt
er C
art
ridg
es
and
Ele
me
nts
Ord
erin
g G
uid
e
Sinterflo® FMetal Fibre Cartridge andElements
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Micron Rating(liquid)Table 3
e.g.:0040=40micron
Sinterflo®F:3µmto60µmavailable,specify ‘Absolute’ rating.
Nominal Cartridge Length*Table 2
05 125mm(5")
10 250mm(10")
20 498mm(20")
30 745mm(30")
40 1012mm(40")
* Other non-standard lengths are available on request
End FittingsTable 1
0 DOEfitting/pleated
1 DOEfitting/cylindrical
2 SOE222fitting/pleated
3 SOE222fitting/cylindrical
4 SOE226fitting/pleated
5 SOE226fitting/cylindrical
7 SOE threaded/pleated
8 SOE threaded/cylindrical
Seal Material*Table 4
C Chemraz®
E EPDM
N Nitrile
P PTFE(DOEonly)
S Silicone
F FEP coated Viton®(SOEonly)
T FEPcoatedsilicone(SOEonly)
Y FEPcoatedEPDM(SOEonly)
V Viton®
X No seal
Sinterflo® PMetal Powder Cartridge andElements
Micron Rating (liquid)Table 3
e.g.:0040=40micron
Sinterflo®P:3µmto60µmavailable,specify ‘Absolute’ rating.
Nominal Cartridge Length*Table 2
05 125mm(5")
10 250mm(10")
20 498mm(20")
30 745mm(30")
40 1012mm(40")
* Other non-standard lengths are available on request.
End FittingsTable 1
3 SOE222fitting
4 SOE226fitting
5 SOE threaded
6 DOEfitting
DOE: Double Open Ended Fitting. SOE: Single Open Ended Fitting.
Product Code: 250 - - C - Table 1 Table 2 Table 4 Table 5 Table 6Table 3
DOE
222
226
Threaded
end
Double Open Ended Fitting
DOE
222
226
Threaded
end
Threaded End Fitting
DOE
222
226
Threaded
end
226 Fitting
DOE
222
226
Threaded
end
222 Fitting
DOE
222
226
Threaded
end
Double Open Ended Fitting
DOE
222
226
Threaded
end
Threaded End Fitting
DOE
222
226
Threaded
end
226 Fitting
DOE
222
226
Threaded
end
222 Fitting
Seal Material*Table 4
C Chemraz®
E EPDM
N Nitrile
P PTFE(DOEonly)
S Silicone
F FEP coated Viton®(SOEonly)
T FEPcoatedsilicone(SOEonly)
Y FEPcoatedEPDM(SOEonly)
V Viton®
X No seal
Product Code: 405 - - -Table 1 Table 2 Table 4 Table 5Table 3
* Omit ‘Table 4’ for the threaded option.
Guard/Support OptionTable 5
G Guard(pleatedonly)
S Backflushsupport(cylindricalonly)
N None
Fin Option(SOE226andSOE222)
Table 6
F Fin
N Nofin
Threaded Option
Pleated
1 1"NPT
2 1.5"NPT
3 1"BSPT
4 2" BSPT
5 1.5"BSPT
6 2" NPT
7 1.25" BSPT
Cylindrical
1 1"NPT
2 1.5"NPT
3 1.5"BSPP
4 2"BSPT
5 1"BSPT
6 1.5"BSPT
Options*
* Omit ‘Table 6’ for the DOE option.
DOE: Double Open Ended fitting. SOE: Single Open Ended fitting.
* Omit ‘Table 4’ for the threaded option.
Threaded Option*Table 5
1 1" NPT
2 1.5" NPT
3 1.5" BSPT
4 1” BSPT
5 2" BSPT
* Omit ‘Table 5’ for the DOE option.
163162
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Sint
erfl
o® M
eta
l Filt
er C
art
ridg
es
and
Ele
me
nts
Ord
erin
g G
uid
e
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Sinterflo® MMetal Mesh Cartridge andElements
Micron Rating (liquid)Table 3
e.g.:0040=40micron
Sinterflo®M:3µmto1000µmavailable,specify‘Nominal’rating.
DOE
222
226
Threaded
end
Double Open Ended Fitting
DOE
222
226
Threaded
end
Threaded End Fitting
DOE
222
226
Threaded
end
226 Fitting
DOE
222
226
Threaded
end
222 Fitting
Nominal Cartridge Length*Table 2
05 125mm(5")
10 250mm(10")
20 498mm(20")
30 745mm(30")
40 1012mm(40")
* Other non-standard lengths are available on request
End FittingTable 1
0 DOEfitting/pleated
1 DOEfitting/cylindrical
2 SOE222fitting/pleated
3 SOE222fitting/cylindrical
4 SOE226fitting/pleated
5 SOE226fitting/cylindrical
7 SOE threaded/pleated
8 SOE threaded/cylindrical
Seal Material*Table 4
C Chemraz®
E EPDM
N Nitrile
P PTFE(DOEonly)
S Silicone
F FEP coated Viton®(SOEonly)
T FEPcoatedsilicone(SOEonly)
Y FEPcoatedEPDM(SOEonly)
V Viton®
X No seal
Product Code: 250 - - B - Table 1 Table 2 Table 4 Table 5 Table 6Table 3
ORDERING GUIDE
Guard/Support OptionTable 5
G Guard(pleatedonly)
S Backflushsupport(cylindricalonly)
N None
Fin Option(SOE226andSOE222)
Table 6
F Fin
N Nofin
Threaded Option
Pleated
1 1"NPT
2 1.5"NPT
3 1"BSPT
4 2" BSPT
5 1.5"BSPT
6 2" NPT
7 1.25" BSPT
Cylindrical
1 1"NPT
2 1.5"NPT
3 1.5"BSPP
4 2"BSPT
5 1"BSPT
6 1.5"BSPT
Options*
* Omit ‘Table 6’ for the DOE option.
DOE: Double Open Ended fitting. SOE: Single Open Ended fitting.
* Omit ‘Table 4’ for the threaded option.
165164
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
End
Ca
p A
da
pte
rs fo
r Dis
po
sab
le C
art
ridg
es
Ord
erin
g G
uid
e
End Cap AdaptersDisposable Cartridges
Cartridge Top End Outlet End Code Description End Fitting Seal Quantity End Fitting Seal Quantity
A Code 3 Flat None Open O-ring 222 2
B Code 7 Fin None Open O-ring 226 2
C Code 8 Fin None Open O-ring 222 2
F N SOE Recess None Flat open O-ring 213 1
G GDOE(shortlength) Flatopen Flatgasket 1 Flatopen Flatgasket 1
H G SOE Flat None Flat open O-ring BS118 2 (fitintofilterhousing)
J 216(218),fin Fin None Open O-ring216 1 O-ring 218 1
K Code 2 Flat None Open O-ring 226 2
L 223,fin(nolugs) Fin None Open O-ring223 2
M DOE Flatopen Flatgasket 1 Flatopen Flatgasket 1
P Code18(retrofit) Flat None Open O-ring222 2
S Code28,fin(3lugs) Fin None Open O-ring222 2
T 223,flat(nolugs) Flat None Open O-ring223 2
U 224,fin Fin None Open O-ring224 2
V 226,fin Fin None Open O-ring226 2
W F20+Code7 Fin None Open O-ringBS226 2 (stainlesssteelcore)
X F20+Code2 Flat None Open O-ringBS226 2 (stainlesssteelcore)
Y BS832,flat Flat None Open O-ringBS832 2
Z F20+CodeY Flat None Open O-ringBS832 2 (stainlesssteelcore)
B F HGCA
K PMLJ S
T V W XU Y
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Z
ORDERING GUIDE
167166
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Dis
po
sab
le C
art
ridg
es
Ord
erin
g G
uid
e
Pre-FiltersDisposable Cartridges
Absolute Pore RatingTable 2
P5 0.5µmP6 0.6µmP8 0.8µm01 1µm02 2µm03 3µm05 5µm07 7µm10 10µm15 15µm20 20µm30 30µm40 40µm60 60µm75 75µm90 90µm105 105µm
Length (Nominal)Table 4
1 250mm(10")
2 510mm(20")
3 760mm(30")
4 1020mm(40")
5 125mm(5")
SealsTable 6
A Ethylene Propylene
B Silicone
C Viton®
D Nitrile
E FEP Encapsulated Viton®
G FEP Encapsulated Silicone
J DOE PTFE
Additional OptionsTable 7
A N+U
N Non-steamable(noinsert)
P Pharmaceuticalgrade*
U Unbranded
* Porvair pharmaceutical-grade filters are designed for use in cGMP manufacturing, processing or packaging facilities for injectable drug products and comply with the Federal Drug Administration’s regulations CFR Title 21, parts 211.72 ‘Filters’ and 210.3 (b) (6), and United States Pharmacopeia 788 ‘Particulate Matter in Injections’. These products contain a stainless steel insert.
AdaptersTable 5
A Code 3
B Code 7
C Code 8
F N SOE
G GDOE(shortlength)
H G SOE
J 216(218),fin
K Code 2
L 223,fin(nolugs)
M DOE
S Code28,fin(3lugs)
T 223,flat(nolugs)
U 224,fin
V 226,fin
Y BS832,flat
SOE: Single Open Ended DOE: Double Open Ended
Examplepartnumber:K01S2BBP KlearfilTM, 1µm, Standard hard cage, 510mm (20") long, Code 7, silicone seals, pharmaceutical grade.
Please refer to the individual product datasheets within this catalogue for absolute pore ratings (Table 2) and filter versions (Table 3) available for each pre-filter.
Membrane FiltersDisposable Cartridges
Length (Nominal)Table 4
1 250mm(10")
2 510mm(20")
3 760mm(30")
4 1020mm(40")
5 125mm(5")
Examplepartnumber:BT20S2BBP BiofilTM, 0.2µm, Standard hard cage, 510mm (20") long, Code 7, silicone seals, pharmaceutical grade.
Please refer to the individual product datasheets within this catalogue for absolute pore ratings (Table 2) and filter versions (Table 3) available for each membrane filter.
SOE: Single Open Ended. DOE: Double Open Ended.
AdaptersTable 5
A Code 3
B Code 7
C Code 8
F N SOE
G GDOE(shortlength)
H G SOE
J 216(218),fin
K Code 2
L 223,fin(nolugs)
M DOE
S Code28,fin(3lugs)
T 223,flat(nolugs)
U 224,fin
V 226,fin
W F20+Code7 (stainlesssteelcore)
X F20+Code2 (stainlesssteelcore)
Y BS832,flat
Z F20+CodeY (stainlesssteelcore)
Absolute Pore RatingTable 2
02 0.02µm04 0.04µm10 0.1µm20 0.2µm45 0.45µm65 0.65µm100 1.0µm120 1.2µm
Pre-FilterTable 1
CR CarbofilTM
CP CryptofilTM
K KlearfilTM
M MicrofilTM
P PolyfilTM II
TA TekfilTM Absolute
TN TekfilTMNominal
R TrapfilTM
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Membrane FilterTable 1
A AquafilTM
BT BiofilTM
BTP BiofilTM Plus
C ChemifilTM
F FluorofilTM*
HT HydrofilTM
HTP HydrofilTM Plus
VT VinofilTM
VersionTable 3
L Economy*
R Rinsed
S Standard
W StainlessSteelCore**
* BiofilTM only. ** Fluorofil Plus only.
ORDERING GUIDE
SealsTable 6
A Ethylene Propylene
B Silicone
C Viton®
D Nitrile
E FEP Encapsulated Viton®
G FEP Encapsulated Silicone
J DOE PTFE
* Porvair pharmaceutical-grade filters are designed for use in cGMP manufacturing, processing or packaging facilities for injectable drug products and comply with the Federal Drug Administration’s regulations CFR Title 21, parts 211.72 ‘Filters’ and 210.3 (b) (6), and United States Pharmacopeia 788 ‘Particulate Matter in Injections’. These products contain a stainless steel insert.
Additional OptionsTable 7
A N+U
N Non-steamable(noinsert)
P Pharmaceuticalgrade*
U Unbranded
VersionTable 3
R Rinsed
S Standard Hard Cage
Product Code: Table 7Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7Product Code: - -
* Includes the FluorofilTM, FluorofilTM Plus and FluorofilTM F100.
169168
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Dis
po
sab
le C
art
ridg
es
Ord
erin
g G
uid
e
Junior FiltersDisposable Cartridges
Absolute Pore RatingTable 2
20 0.2µm45 0.45µmP5 0.5µmP8 0.8µm01 1µm02 2µm05 5µm
Examplepartnumber:JB2050B BiofilTM, J-Style, 0.2µm, 136mm (5") long, silicone seal.
Please refer to the individual product datasheets within this catalogue for absolute pore ratings (Table 2) available for each junior filter.
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
ORDERING GUIDE
Length (Nominal)Table 3
25 77.5mm(2.5”)
50 136mm(5”)
Product Code: Table 1 Table 2 Table 3 Table 4
Junior FilterTable 1
JB BiofilTM
JF FluorofilTM
JM MicrofilTM
JP PolyfilTM
F20VENT VentafilTM
S-Style
J-Style
SB BiofilTM
SF FluorofilTM
SM MicrofilTM
SP PolyfilTM
OptionsTable 4
B ½" BSP
X ¼" BSP
Threaded
A Ethylene Propylene
B Silicone
C Viton®
D Nitrile
E FEP Encapsulated Viton®
G FEP Encapsulated Silicone
Seals (J-Style)
171170
CONTENTS INDEXORDERING INFORMATION ORDERING GUIDEPRODUCTSINTRODUCTION
Filte
r Ho
usin
gs
Ord
erin
g G
uid
e
Filter HousingsSingle and Multiple Round Housings
Product Code: FIA2600 - - - -Table 1 Table 2 Table 3 Table 4 Table 5
Element OptionTable 3
B Code7:226fin
C Code8:222fin
M DOEknifeedge
Connection OptionTable 4
1 2"BSPTmale
2 2"ASA150lbflanges
3 2"RJT
4 2"sch.40stubbpipes
5 11/2"ASA150lbflanges
6 2"NPTmale
7 11/4"BSPTmale
SealTable 4
V Viton®
N Nitrile
S Silicone
P PTFE
E EPDM
Standard LengthTable 2
10 250mm(9.8”)
20 498mm(19.6”)
30 745mm(29.3”)
40 1012mm(39.8”)
FIA 2600 Multiple Round Housing
Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Product Code: FIA2110 - - -Table 1 Table 2 Table 3 Table 4 Table 5 Table 6
Bowl SealTable 6
V Viton® Standard
N Nitrile
S Silicone
E Epom
F PTFE coated Viton® Standard
Drain TapTable 5
N Nonefitted(plugonly)
D Tapfitted
Indicator/Vent FittedTable 4
N Nonefitted
G Indicatorfitted
V Ventfitted(2way)
S Ventfitted(3way)
FIA 2110 Single Round Housing
Bowl LengthTable 1
1 310mm(12.2”) Nominal
2 580mm(22.8”) Nominal
3 800mm(31.5”) Nominal
4 187mm(7.4”) Nominal
5 1080mm(42.5”) Nominal
* Add 45mm to the bowl length for 226 style elements
Note: Other sizes and special housings can also be accommodated on request.
Note: Other sizes and special housings can also be accommodated on request.
Number RoundTable 1
Availableinroundsrangingfrom2-30*.
e.g:2round=2.10round=10.
* Excluding 6 and 8 round.
Connection OptionTable 2
1 1"BSPfemalepara.in/outstandard
2 3/4"BSPfemalepara.in/outviaadapter
3 2"ASA150lbflangesin/out
4 1"RJTfittingsin/out
5 1"Tri-cloverin/out
6 1/4"BSPPfemalein/outviaadapter
7 11/2"ASA150lbflangesin/out
8 1"NPTin/out
Element OptionTable 3
1 222
2 DDE
3 226p
Metallic Last Chance Filtersfor the Printing Industry
173
Me
talli
c L
ast
Cha
nce
Filt
ers
for t
he P
rintin
g In
dus
try
Ord
erin
g G
uid
e
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
172 Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
In-Line Filter (30mmStainlessSteel)
Final Ink Filter
Pleated Unrimmed Disc Filter
Minimumorderquantityforeachfilteris20units.
Product Code: 8069 - Table 1
Micron RatingsTable 1
0005B 5µm
0015B 15µm
0025B 25µm
0040B 40µm
ORDERING GUIDE
Product Code: 8073 - 11 - 02 - 0010B
Product Code: 8071 - 01 - Table 1
Micron RatingsTable 1
0002B 2µm
0005B 5µm
0010B 10µm
0020B 20µm
Grid Filter
Product Code: 8156
MicrodiscTM 4SS (47mmStainlessSteelDiscFilter)
Product Code: 8077 - - Table 1
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
Table 2
ConnectorsTable 1
11 2.6mmO/Dbarb
22 4.9mmO/Dbarb
33 3mmJaco®
44 6.5mmO/Dbarb
66 ¼" NPT
MicrodiscTM 3SS (30mmStainlessSteelDiscFilter)
Product Code: 8067 - - Table 1
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
Table 2
ConnectorsTable 1
11 2.6mmO/Dbarb
22 4.9mmO/Dbarb
Disposable Air and Last Chance Filtersfor the Printing Industry
175
Dis
po
sab
le A
ir a
nd L
ast
Cha
nce
Filt
ers
for t
he P
rintin
g In
dus
try
Ord
erin
g G
uid
e
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
174 Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Minimumorderquantityforeachfilteris20units.
ORDERING GUIDE
MicrodiscTM 4PS (45mmStandardDiscFilter)
Product Code: 8111 - - - Table 1 Table 2 Table 3
ConnectorsTable 1
33 Luer
11 CPC
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
0050B 50µm
HousingsTable 3
22 White acetal
33 Blackacetal
MicrodiscTM 4PV (45mmPre-PumpDiscFilter)
Product Code: 8074 - - - 23Table 1 Table 2
ConnectorsTable 1
221 ¼" Jaco®
222 6mmJaco®
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0015B 15µm
0020B 20µm
0050B 50µm
MicrodiscTM 7PS(74mmDiscFilter)
Product Code: 8169 - - - Table 1 Table 2 Table 3
ConnectorsTable 1
221 ¼”Jaco®
222 6mmJaco®
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
0050B 50µm
HousingsTable 3
11 Natural
13 Opaqueblack
Bullet Filter(5µmand10µm)
Product Codes: 8166 (5µm)and8065(10µm)
In-Line Filter (PEEK)
Product Code: 8098 - 6 - Table 1
Micron RatingsTable 1
0003B 3µm
0005B 5µm
In-Line UV Filter (PEEK)
Product Code: 8091 - 2 - Table 1
Micron RatingsTable 1
0003B 3µm
0005B 5µm
0010B 10µm
MicrodiscTM 3PS (33mmDiscFilter)
Product Code: 8159 - - - Table 1 Table 2 Table 3
ConnectorsTable 1
11 3mmJaco®
22 Femaleluer
HousingsTable 3
12 White acetal
13 Blackacetal
Micron RatingsTable 2
0005B 5µm
0010B 10µm
0020B 20µm
0050B 50µm
Last Chance Inkjet Filter
Product Code: 8087 - - Table 1 Table 2
ConnectorsTable 2
23 2.6mm(0.1")barb
Micron RatingsTable 1
0003B 3µm
0005B 5µm
0050B 50µm
MicrodiscTM 1PA(15mmS-VentDiscFilter)
Product Code: 8163
MicrodiscTM 2PA(25mmS-VentDiscFilter)
Product Code: 8164
Capsule Filtersfor the Printing Industry
177
Ca
psu
le F
ilte
rs fo
r the
Prin
ting
Ind
ustr
yO
rde
ring
Gu
ide
CONTENTS PRODUCTS INDEXORDERING INFORMATIONINTRODUCTION
176 Contact Information: UK, New Milton Division US, Ashland Division Tel:+44(0)1425612010 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
MicrocapTM (FullyMoulded)
Minimumorderquantityforeachfilteris20units.
ORDERING GUIDE
MicrojetTM
Product Code: 8131 - - 1 - PP - Table 1 Table 2
Micron RatingsTable 1
0500 5µm
1000 10µm
HousingsTable 2
N Natural
C Opaqueblack
MicroprintTM
Product Code: 8096 - - 1 - - Table 1 Table 2 Table 3
ConnectorsTable 2
FF CPC
JJ1 ¼" Jaco®
JJ2 6mmJaco®
HousingsTable 3
N Natural
C Opaqueblack
Micron RatingsTable 1
0050 0.5µm
0100 1µm
0300 3µm
0500 5µm
1000 10µm
2000 20µm
4000 40µm
6000 60µm
Product Code: 8089 - - - - Table 1 Table 2 Table 3 Table 4
HousingsTable 4
N Natural
C Opaqueblack
ConnectorsTable 3
AA ¼" barb
DD ¼"NPT(male)
FF CPC
GG1 ¼" Jaco®90°
GG2 6mmJaco®90°
JJ1 ¼" Jaco®
JJ2 6mmJaco®
PP Luer
QQ Luer90°
Micron RatingsTable 1
0050 0.5µm
0100 1µm
0300 3µm
0500 5µm
1000 10µm
2000 20µm
4000 40µm
6000 60µm
Filter MediaTable 2
1 PolyfilTM
5 KlearfilTM
179178
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ap
plic
atio
n In
de
x
Active pharmaceutical ingredients BiofilTM Plus 56-57 HydrofilTM Plus 68-69 FluorofilTM 60-61 PolyfilTM II 46-47
Activated Carbon Filtration Vyon® Porous Plastic 154-155
Aeration Metal Powder Filter Discs 90 Porous Cups and Bushings 132 Sinterflo® MC Fluidising Media 120-121 Sinterflo® P Metal Powder Aeration Units 118-119 Sinterflo® P Sintered Metal Powder 151 Spargers 133 Vyon® Disc Disffusers 138 Vyon® Tubular Disffusers 139
Agrochemical Filtration Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23
Air Filtration Metal Mesh Filter Discs 88 Metal Fibre Filter Discs 89
Ammonia Filtration (Liquid and Gaseous) Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23
Analytical Chromatography BioVyon™ Sintered Porous Plastics 156-157
Metal Powder Filter Discs 90 Sinterflo® P Sintered Metal Powder 151
Antibiotics Biofil™II 54-55 Fluorofil™ 60-61 Hydrofil™ 66-67 Polyfil™ II 46-47
Autoclave Venting Ventafil™ 80-81
A Sinterflo® P Sintered Metal Powder
Ballast Water Sinterflo® MC Filter Plates 120-121
Battery Venting Sinterflo® P Metal Powder 151 Vyon® Porous Plastic 154-155 BatteryVentsandFlameArrestors 129
Beer (see Brewing)
Beverage AquafilTM 52-53 BiofilTM II 54-55 BiofilTM Plus 56-57 CryptofilTM 40-41 FluorofilTM 60-61 HydrofilTM 66-67 HydrofilTM Plus 68-69 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19 StabifilTM 142-143 TekfilTM 48-49 VinofilTM 70-71
Biopharmaceuticals AquafilTM 52-53 BiofilTM II 54-55 BiofilTM Junior 76-77 BiofilTM Plus 56-57
Bioprocessing HydrofilTM 66-67 HydrofilTM Plus 68-69 KlearfilTM 42-43 MicrofilTM 44-45 MicrofilTM Junior 72-73 PolyfilTM II 46-47
Bioreactors FluorofilTM 60-61 PolyfilTM II 46-47 Sinterflo® P Sintered Metal Powder 151 Spargers 133
B Bioscience BioVyonTM Porous Plastic 156-157 Sinterflo® P Sintered Metal Powder 151
Biotechnology FluorofilTM Plus 62-63
Brewing BiofilTM II 54-55 FluorofilTM 60-61 KlearfilTM 42-43 MicrofilTM 44-45 StabifilTM 142-143 VinofilTM 70-71
Canister Collection Vessel Vents BioVyonTM Porous Plastic 156-157
Carbon Fines Removal FluorofilTM F100 64-65
Catalyst Recovery and Retention Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19
Catheter Valves and Vents BioVyonTM Porous Plastic 156-157
Cellulose Acetate Fibre Production Candle Filters 26 RempakTM Candle Filters 27
Chemical Production AquafilTM 52-53 BiofilTM II 54-55 BiofilTM Junior 76-77 ChemifilTM 58-59 FluorofilTM 60-61 FluorofilTM F100 64-65 FluorofilTM Junior 78-79 HydrofilTM 66-67 MicrofilTM 44-45 PolyfilTM II 46-47 PolyfilTM Junior 74-75 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 130-131
C
TekfilTM 48-49 Vyon®FluidizingMedia 122-123 Chromatography (seeAnalyticalChromatographyandSolidPhase
ExtractionSamplePreparation)
Clarification BiofilTM II 54-55 BiofilTM Junior 76-77 BiofilTM Plus 56-57 HydrofilTM 66-67 KlearfilTM 42-43 PolyfilTM II 46-47 TrapfilTM 50-51
Coatings MicrofilTM 44-45 PolyfilTM II 46-47 PolyfilTM Junior 74-75 TekfilTM 48-49
Coolant Filtration Differential Pressure Indicators 147 In-LineElementsandScreens 91 PleatedElements(Aerospace) 28,37
Cosmetics FluorofilTM 60-61 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo® P Porous Powder Cylinders 130-131 TekfilTM 48-49
Compressed Air FluorofilTM 60-61 PolyfilTM II 46-47
Dairy BiofilTM II 54-55 FluorofilTM 60-61 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® M Metal Mesh Filter Element 20-23 Sinterflo®PPowderFilterElement 18-19
D
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
181180
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ap
plic
atio
n In
de
x
De-watering Spargers 133
Diagnostics BioVyonTM Porous Plastic 156-157
Diffusers Sinterflo® P Sintered Metal Powder 151
Drug Delivery Sinterflo® P Flow Restrictors 128 BioVyonTM Porous Plastic 156-157
Dust Filtration Vyon® Porous Plastic 154-155 Sinterflo®FMetalFibreFilterElements 20-23
Effluent Aeration (SeeWastewaterTreatment)
Electronics AquafilTM 52-53 BiofilTM II 54-55 BiofilTM Junior 76-77 FluorofilTM 60-61 HydrofilTM 66-67 PolyfilTM II 46-47 PolyfilTM Junior 74-75
Embarkation Water Supply CryptofilTM 40-41
Emanation Vyon® Sintered Porous Plastic 154-155 BioVyonTM Porous Plastic 156-157
Ethylene Vinyl Alcohol Sinterflo®MMetalMeshFilterElements 20-23
Fermentation BiofilTM Plus 56-57 HydrofilTM Plus 68-69 FluorofilTM Plus 62-63
Fine Chemicals AquafilTM 52-53
E
F
BiofilTM II 54-55 BiofilTM Junior 76-77 ChemifilTM 58-59 FluorofilTM 60-61 FluorofilTM F100 64-65 FluorofilTM Junior 78-79 HydrofilTM 66-67 KlearfilTM 42-43 PolyfilTM II 46-47 PolyfilTM Junior 74-75 TekfilTM 48-49
Flame Arresting BatteryVentsandFlameArrestors 129 Porous Cups and Bushings 132 Sinterflo® P Sintered Metal Powder 151 Vyon® Porous Plastics 154-155
Flow Restrictors BatteryVentsandFlameArrestors 129 In-lineElementsandScreens 91 Metal Powder Filter Discs 90 Porous Cups and Bushings 132 Sinterflo® P Sintered Metal Powder 151 Fluidisation Sinterflo® MC Fluidising Media 120-121 Sinterflo® P Metal Powder Aeration Units 118-119 Vyon®FluidizingMedia 122-123
Food Processing BiofilTM II 54-55 CryptofilTM 40-41 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo® P Porous Powder Cylinders 130-131 TekfilTM 48-49 Vyon®FluidizingMedia 122-123
Fragrance Emanation (SeeEmanation)
Frits BioVyonTM Porous Plastic 156-157 Sinterflo® P Sintered Metal Powder 151 Vyon® Porous Plastic 154-155
Fruit Juices VinofilTM 70-71 StabifilTM 141-143
Fuel Systems In-LineElementsandScreens 91 Differential Pressure Indicators 147 PleatedElements(Aerospace) 28,37
Gas Filtration ChemifilTM 58-59 FluorofilTM 60-61 FluorofilTM F100 64-65 FluorofilTM Junior 78-79 Metal Powder Filter Discs 90 PleatedElements(Aerospace) 28,37 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MCFluidizingMedia120-121 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®PMetalPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 130-131
Gasification Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®PMetalPowderFilterElement 18-19
Guard Filtration PolyfilTM II 46-47 TrapfilTM 50-51
High Purity Gas Filtration Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®PMetalPowderFilterElement 18-19
Hydraulics Differential Pressure Indicators 147 In-LineElementsandScreens 91 Metal Fibre Filter Discs 89 Metal Mesh Filter Discs 88 PleatedElements(Aerospace) 28,37
Ink Bullet Filter 106 FinalInkfilter 94 Grid Filter and O-ring 99 In-LineElementsandScreens 91 In-LineFilter(PEEK) 108
G
H
I
In-LineFilter(UV) 107 KlearfilTM 42-43 LastChanceInkjetFilter 109 MicrocapTM 112 MicrodiscTM 1PA 100 MicrodiscTM 2PA 101 MicrodiscTM 3PS 102 MicrodiscTM 4PS 103 MicrodiscTM 4PV 104 MicrodiscTM 7PS 105 MicrojetTM 114 MicroprintTM 113 PleatedUnrimmedDiscFilter 96 PolyfilTM II 46-47 PolyfilTM Junior 74-75 TekfilTM 48-49
Inkjet (SeeInk)
Large Volume Parenterals BiofilTM Plus 56-57 HydrofilTM Plus 68-69
Life Science BioVyonTM Porous Plastic 156-157 Sinterflo® P Sintered Metal Powder 151
Liquid Filtration Metal Fibre Filter Discs 89 Metal Mesh Filter Discs 88 PleatedElements(Aerospace) 28,37 Sinterflo®MCMetalCompositeFilterCartridge 24-25 Sinterflo®PMetalPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 130-131
Lubricating Oil Differential Pressure Indicators 147 In-LineElementsandScreens 91 Metal Fibre Filter Discs 89 PleatedElements(Aerospace) 28,37
Media Retention (Desiccants) Sinterflo® P Metal Powder 151
L
M
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
183182
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ap
plic
atio
n In
de
x
Medical Device Filtration (SeeBioscience)
Metal Finishing TekfilTM 48-49
Microelectronics Sinterflo® P Flow Restrictors 128 Sinterflo® P Sintered Metal Powder 151
Milk (SeeDairy)
Mineral Water BiofilTM II 54-55 CryptofilTM 40-41 FluorofilTM 60-61 FluorofilTM Plus 62-63 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 VinofilTM 70-71
Mining Sinterflo®MMetalMeshFilterElement 20-23
Nylon Production Candle Filters 26 RempakTM Candle Filters 27
Oil and Lubrication Systems In-LineElementsandScreens 91 PleatedElements(Aerospace) 28,37
Ophthalmic Solution AquafilTM 52-53 BiofilTM II 54-55 BiofilTM Junior 76-77 BiofilTM Plus 56-57 PolyfilTM Junior 74-75
Oxygen Service BioVyonTM Porous plastic 156-157 Metal Fibre Filter Discs 88 Metal Powder Filter Discs 90 Sinterflo® P Sintered Metal Powder 151
N
O
Particulate Filtration CryptofilTM 40-41 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 PolyfilTM Junior 74-75 TekfilTM 48-49 TrapfilTM 50-51
PEEK Production Leaf Discs 32
Pharmaceutical BiofilTM II 54-55 BioVyonTM Porous Plastic 156-157 FluorofilTM 60-61 KlearfilTM 42-43 MicrofilTM 44-45 MicrofilTM Junior 72-73 PolyfilTM II 46-47 PolyfilTM Junior 74-75 Sinterflo® P Porous Powder Cylinders 130-131 TekfilTM 48-49 Photographic Chemicals TekfilTM 48-49
Photoresists ChemifilTM 58-59 FluorofilTM 60-61 FluorofilTM F100 64-65 FluorofilTM Junior 78-79
Pneumatic Equipment In-LineElementsandScreens 91 Vyon® Silencers 134-135 Sinterflo® P Metal Powder 151 Union Filters and Miniature Housings 92 Vyon® Porous Plastic 154-155
Polycarbonate Film Production Solid Plate Leaf Disc Filters 33
Polyester Fibre Production Candle Filters 26 RempakTM Candle Filters 27
Polyester Film Production Leaf Disc Filter 32
P Polymer Melt Candle Filters 26 RempakTM Candle Filters 27 Sinterflo®PMetalPowderFilterElement 18-19
Potable Water Filtration BiofilTM II 54-55 CryptofilTM 40-41 MicrofilTM 44-45 VinofilTM 170-171 Vyon® Tubular Diffusers 139
Powder Handling FluorofilTM Plus 62-63 Sinterflo® P Metal Aeration Units 118-119 Vyon®FluidizingMedia 122-123
Pressure Snubber Vyon® Silencers 134-135 Sinterflo® P Flow Restrictors 128 Sinterflo® P Metal Powder 151
Printing Inks Bullet Filter 106 FinalInkfilter 94 Grid Filter and O-ring 99 In-LineFilter(UV) 108 In-LineElementsandScreens 91 In-LineFilter(PEEK) 107 KlearfilTM 42-43 LastChanceInkjetFilter 109 MicrocapTM 112 MicrodiscTM 1PA 100 MicrodiscTM 2PA 101 MicrodiscTM 3PS 102 MicrodiscTM 4PS 103 MicrodiscTM 4PV 104 MicrodiscTM 7PS 105 MicrojetTM 114 MicroprintTM 113 PleatedUnrimmedDiscFilter 96 PolyfilTM II 46-47 PolyfilTM Junior 74-75 TekfilTM 48-49
Process Chromatography BioVyonTM Porous Plastic 156-157 Metal Mesh Filter Discs 88 Metal Powder Filter Discs 90
Process Gas FluorofilTM Plus 62-63
FluorofilTM Junior 78-79 Process Water Systems BiofilTM II 54-55 CryptofilTM 40-41 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47
Pure Water Supply AquafilTM 52-53 BiofilTM II 54-55 BiofilTM Plus 56-57 ChemifilTM 58-59 FluorofilTM 60-61 HydrofilTM 66-67 HydrofilTM Plus 68-69 VinofilTM 70-71
Sand Filtration Sinterflo® MC Filter Plates 126-127
Sea Water Sinterflo® MC Filter Plates 126-127
Semiconductors AquafilTM 52-53 BiofilTM II 54-55 BiofilTM Junior 76-77 FluorofilTM 60-61 HydrofilTM 66-67 PolyfilTM Junior 74-75 Sinterflo® P Sintered Metal Powder 151
Sensor Protection BatteryVentsandFlameArrestors 129 Sinterflo® P Flow Restrictors 128 Sinterflo® P Sintered Metal Powder 151
Silencing Vyon® Silencers 134-135
Silo Construction Sinterflo® P Aeration Units 118-119
Soft Drink BiofilTM II 54-55 CryptofilTM 40-41 FluorofilTM 60-61
S
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
185184
CONTENTS INDEXORDERING INFORMATIONPRODUCTSINTRODUCTION
Ap
plic
atio
n In
de
x
FluorofilTM Plus 62-63 KlearfilTM 42-43 PolyfilTM II 46-47 StabifilTM 142-143 VinofilTM 70-71 Solvent Filtration ChemifilTM 58-59 FluorofilTM 60-61 FluorofilTM Junior 78-79 Porous Cups and Bushings 132 Sinterflo® P Porous Powder Cylinders 130-131 TekfilTM 48-49 Sound Attenuation Metal Powder Filter Discs 90 Porous Cups and Bushings 132 Vyon® Silencers 134-135 Sinterflo® P Sintered Metal Powder 151
Sparging Porous Cups and Bushings 132 Sinterflo®MCMetalMeshComposite 153 Sinterflo® P Sintered Metal Powder 151 Spargers 133
Spin Pack Filters Metal Fibre Filter Discs 89 Metal Mesh Filter Discs 88 Porous Cups and Bushings 132
Spirits BiofilTM II 54-55 KlearfilTM 42-43 PolyfilTM II 46-47 StabifilTM 142-143
Stabilisation BiofilTM II 54-55 FluorofilTM 60-61 FluorofilTM Junior 78-79 StabifilTM 142-143
Steam (Process and Culinary) Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo®MCMetalCompositeFilterCartridge 24-25 Sinterflo®PMetalPowderFilterElement 18-19 Sinterflo® P Porous Powder Cylinders 130-131 Spargers 133
Sterile Product Storage Vessels VentafilTM 80-81
Sterile Venting ChemifilTM 58-59 FluorofilTM 60-61 FluorofilTM Plus 62-63 FluorofilTM Junior 78-79 VentafilTM 80-81
Syringe Vent BioVyonTM Porous plastic 156-157
Table Water (SeeMineralWater)
Tabletting FluorofilTM Plus 62-63
Tanker Transfer BiofilTM II 54-55 KlearfilTM 42-43 PolyfilTM II 46-47
Toiletries and Cosmetics BiofilTM II 54-55 BiofilTM Plus 56-57 FluorofilTM 60-61 FluorofilTM Junior 78-79 KlearfilTM 42-43 PolyfilTM II 46-47 Sinterflo® P Porous Powder Cylinders 130-131 TekfilTM 48-49
Trap Filtration PolyfilTM II 46-47 TrapfilTM 50-51
Vaccines BiofilTM II 54-55 FluorofilTM 60-61 KlearfilTM 42-43 MicrofilTM 44-45
Vacuum Hold Down Tables Vyon® Porous Plastics 154-155
T
V
Sinterflo® P Metal Powder 151
Venting BatteryVentsandFlameArrestors 129 BioVyonTM Porous Plastics 156-157 FluorofilTM 60-61 Sinterflo®FMetalFibreFilterElement 14-17 Sinterflo® MC Filter Plates 126-127 Sinterflo®MMetalMeshFilterElement 20-23 Sinterflo® P Flow Restrictors 128 Sinterflo® P Sintered Metal Powder 151 VentafilTM 80-81
Vetinary Medication BiofilTM II 54-55 BiofilTM Plus 56-57 FluorofilTM 60-61 FluorofilTM Junior 78-79 FluorofilTM Plus 62-63 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47
Wastewater Treatment Spargers 133 TekfilTM 48-49 Vyon® Disc Diffusers 138 Vyon® Porous Plastic 154-155 Vyon® Tubular Diffuser 139
Water BiofilTM II 54-55 BiofilTM Plus 56-57 BiofilTM Junior 76-77 ChemifilTM 58-59 CryptofilTM 40-41 HydrofilTM 66-67 HydrofilTM Plus 68-69 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo® MC Filter Plates 126-127 Spargers 133 StabifilTM 142-143 TekfilTM 48-49 VinofilTM 70-71 Vyon® Disc Diffusers 138 Vyon® Porous Plastic 154-155 Vyon® Tubular Diffuser 139
W
Water for Injection (SeePureWaterSupply)
Water Treatment (SeeWastewaterTreatment)
Wicking BioVyonTM Porous plastic 156-157 Metal Powder Filter Discs 90 Porous Cups and Bushings 132 Sinterflo® P Sintered Metal Powder 151 Vyon® Porous Plastic 154-155
Wine BiofilTM II 54-55 FluorofilTM 60-61 FluorofilTM Plus 62-63 KlearfilTM 42-43 MicrofilTM 44-45 PolyfilTM II 46-47 Sinterflo®PMetalPowderFilterElement 18-19
Contact Information: UK, Segensworth Division US, Ashland Division Tel:+44(0)1489864330 Tel:+18045501600 Email:info@porvairfiltration.com Email:infoUS@porvairfiltration.com
Porvair Filtration Group Ltd.
1 Concorde Close Segensworth Fareham Hampshire PO15 5RT UK
Tel: +44(0)1489864330 Fax: +44(0)1489864399 Email:info@porvairfiltration.com
Porvair Filtration Group Inc.
301 Business Lane Ashland Virginia 23005 USA
Tel: +18045501600 Fax: +18045503262 Email:infoUS@porvairfiltration.com
www.porvairfiltration.com
PFG008/December2014/Revision1:January2016
Porvair,Inprinta,SinterfloandVyonareregisteredtrademarksofPorvairplc.
Aquafil,Biofil,BioVyon,Chemifil,Cryptofil,Fluorofil,Hydrofil,Klearfil,Microcap,Microdisc,Microfil,Microjet,Microprint,Polyfil,Rempak,Stabifil,Tekfil,Trapfil,VentafilandVinofilare trademarksofPorvairplc.
AutoCADisaregisteredtrademarkofAutodeskInc.
BekaertisaprotectedtrademarkofN.V.BEKAERTS.A.
ChemrazisaregisteredtrademarkofGreene,TweedTechnologies,Inc.
DegrémontisatrademarkofDegrémont.
FecralloyisaregisteredtrademarkofSandvikIntellectualPropertyAB.
HastelloyisaregisteredtrademarkofHaynesInternationalInc.
InconelandMonelareregisteredtrademarksofSpecialMetalsCorporation.
JacoisaregisteredtrademarkofJacoManufacturingCompany.
RilsanisaregisteredtrademarkofARKEMA.
SwagelokisaregisteredtrademarkofSwagelokCompany.
VitonisaregisteredtrademarkofDuPontPerformanceElastomersL.L.C.
© Copyright 2014. Porvair Filtration Group Ltd. All rights reserved.
Whilsteveryefforthasbeenmadetoensuretheaccuracyofthisdocument,duetocontinuousproductdevelopment,thedatacontainedissubjecttoconstantrevisionandPorvairFiltrationGroupLtd.reservestherighttochange,alterormodifyitscontents.
top related