flanged valves - industrialzone · withanged a fl inlet port and slide seal outletort. p equipped...
Post on 13-Jul-2020
2 Views
Preview:
TRANSCRIPT
FLANGED VALVESPENTAIR CLEAN AIR SYSTEMS
02
•EMC2004/108/EC(CA)
•LowVoltageDirective2006/95/EC(CA)
INSTALLATION1.Prepareinletflangesandblowtube
pipestosuitvalvespecification.Avoidinstallingvalvesunderneaththetank.
2. Ensuretankandpipesarefreefromdirt,rustorotherparticulate.
3.Ensuresupplyairiscleananddry.
4.Mountvalvestoinletflangeandblowtubetovalveswithallsealsinplace.Tightenflangeboltsto10Nm(7.4ft–lbs)Ensureblowtubeispushedallthewayintothevalveoutlet.
5.Tanksandpipesmustbeindependentlysupportedfromvalve.
6.MakeelectricalconnectionstosolenoidorconnectRCApilotporttopilotvalve(RCAvalvesonly).
7.Applymoderatepressuretosystemandcheckforinstallationleaks.
8.Fullypressurisesystem.
9.Testfireandlistenforproperactuationandcrisppulsenoise.
Valve is not a structural component. Do not rely on valve to retain tanks or pipe. Whereused,refertoDEINC-002productspecificationforinstallationdetails.
DESCRIPTIONVeryhighperformancediaphragmvalvewithflangedinletportandslidesealoutletportforeasyvalveinstallationandremoval.Availablewithintegralpilotorasremotelypilotedvalve.Outletat90°toinlet.
SUITABLE FORDustcollectorapplications,inparticularforreversepulsejetfiltercleaninganditsvariations,includingbagfilters,cartridgefiltersandenvelopefilters,ceramicfiltersandsinteredmetalfibrefilters.
CONSTRUCTIONBody:Diecastaluminiumor316stainlesssteelFerrule: 305SSArmature: 430FRSSSeals: NitrileorVitonSpring:304SSScrews: 302or304SSOutlet Slide Seal: EPDMorVitonDiaphragm Seat:PA-66(standard),Vitoncoatedmildsteel
RefertoQSeriesSolenoidproductdatasheetforsolenoidconstructiondetails.
OPERATIONRecommended on-time range: 50–500msRecommended time between pulses:1minuteorgreater
MAINTENANCEBeforeconductinganymaintenanceactivityonthesystemensurethatcomponentsarefullyisolatedfrompressureandpowersupplies.Pressureandpowershouldnotbereapplieduntilthevalvehasbeenfullyassembled.
Diaphragmandpilotinspectionshouldbeconductedannually.
APPROVALS•AtexII2DMechanical(RCAOnly)
•CSA(C,US)[C22.2No139–10andUL429:2009](CA&RCA)
•C-Tick(CA)
SIZE OD mm OD inches
1.5˝ 48.3 1.900
WerecommendSchedule40thickness.
WEIGHTS
SIZE INTEGRAL PILOT (CA) kg (lb)
REMOTE PILOT (RCA) kg (lb)
45 1.830(4.03) 1.610(3.55)
MAINTENANCE KITS
MODEL NITRILE VITON INCLUDES
CA/RCA45FS K4502 K4503K4542(Viton/SS)K4544(Viton/SSMainDiaphragmonly)
Diaphragmkitsincludemainandsecondarydiaphragmsandallsprings.
CAC45FStoCA45FSIntegralpilotcoverconversionkit
K4532(NPT)K4538(RC)
K4537(NPT)K4539(RC)
ThecompleteCAintegrallypilotedvalvecoverassembly.Doesnotincludecoverboltsormainbleedpin.
RCAC45FStoRCA45FSRemotepilotcoverconversionkit
K4533(RC)K4535(NPT)
K4534(RC)K4536(NPT)K4543(NPT/SS)
ThecompleteRCAremotelypilotedvalvecoverassemblywithmaindiaphragmandspring.Doesnotincludecoverboltsormainbleedpin.
Integralpilotrepairkit(CA45FSandCAC25FS)
K0380 K0384 O-ringarmatureassembly,armaturespring,ferrule.
Integralpilotrepairkit(CAC45FS)
K0390 N/A O-ringarmatureassembly,armaturespring,ferrule.
45FSOutletseal G690864 G690864-2 Outletseal
GOYEN ‘FS’ SERIESPULSEJETVALVES
FSSeries
03
RCA 45 FS 0 1 0 301
RCA=remotely pilotedCA=integral pilot
Pilot type
45 mm
Valve size
0=1/8″ or CA1=1/4″
Pilot size
0=NPT1=RC9=NPT and stainless-steel valve body
Pilot thread type (RCA), Exhaust thread (CA)
0=Nitrile1=Viton
Diaphragm material
Coil type for CA only. See the RCA3 Solenoid Pilot Valvesbrochure for coil options.
Solenoid type
PRODUCT CHARACTERISTICS AND PERFORMANCE
NOM. SIZE PORT SIZE NUMBER OF DIAPHRAGMS
FLOW PRESSURE RANGE TEMPERATURE RANGE °C °(F)
mm in KV CV kPa (psi) NITRILE SEALS VITON SEALS
45 40 1.5 2 56 65 30(5)–860(125) –40(–40)to82(179.6) –29(–20.2)to232(449.6)
ORDER CODE
Examples: CA45FS010-3001.5˝FSvalvewithnitrilesealsand220/240VACintegralpilotwithDINsocketterminals.
RCAC45FS0911.5˝FSvalvewith1 8˝NPTremotepilotport,stainlesssteelbodyandvalvecover,andvitonseals.
DIMENSIONS(Dimensionsinmmand[inches])
CA/RCA45FS
GOYEN ‘FS’ SERIESPULSEJETVALVES
04
GOYEN RCAC20FS4
SUITABLE FORDustcollectorapplications,inparticularforreversepulsejetfiltercleaninganditsvariations,includingbagfilters,cartridgefiltersandenvelopefilters,ceramicfiltersandsinteredmetalfibrefilters.
CONSTRUCTIONBody:Aluminium(diecast)
Screws: 304StainlesssteelSeals: Inlet O-ring:Nitrileusedwithshockwavediaphragm,VitonwithVitondiaphragm
Outlet:EPDMusedwithshockwavediaphragm,VitonwithVitondiaphragm
Diaphragm:Proprietaryhigh-performanceengineeringthermoplasticElastomerorViton
OPERATIONRecommended on-time range: 50to500msRecommended time between pulses:1minuteorgreater
MAINTENANCEBeforeconductinganymaintenanceactivityonthesystemensurethatcomponentsarefullyisolatedfrompressureandpowersupplies.Pressureandpowershouldnotbereapplieduntilthevalvehasbeenfullyassembled.
Diaphragmandpilotunitinspectionshouldbeconductedannually.
APPROVALSTheRCAC20FS4meetstherequirementsoftheEuropeanLowVoltageDirective2006/95/EC,whenfittedwiththeRCA3PVpilot.
REVERSEPULSEJETVALVES
Please Note:WerecommendusingSchedule40pipe.ThicknessODisasshownbelow.
SIZE OD mm OD inches
¾˝ 26.67 1.05
WEIGHTS
VALVE kg (lb)
RCAC20FS4 0.51(1.12)
MAINTENANCE KITS
MODEL SHOCKWAVE VITON
Diaphragm KitRCAC20FS4 K2034 K2033
20FS4 Outlet SealRCAC20FS4 G690338 G690338-2
PRODUCT CHARACTERISTICS AND PERFORMANCE
NOMINAL PORT SIZE mm (in.)
NO. OF DIAPH.
FLOW KV (CV)
PRESSURE RANGE kPa (psi)
TEMPERATURE RANGE °C (°F)
SHOCKWAVE VITON
20(¾) 1 19(26) 30(5)to860(125)
–40(–40)to82(179.6)
–29(–20.2)to232(449.6)
DESCRIPTIONHigh-performancediaphragmvalvewithaflangedinletportandslidesealoutletport.Equippedwith‘Shockwave’springlessdiaphragm.The4seriesvalvesareavailableasremotepilotvalvesandmaybeconvertedtointegralpilotusingeithertheRCA3DMorRCA3PVscrew-inpilots.Outletisat90°toinlet.TheFSvalverangefeaturesalargerdiameterinletprovidinghigherperformancethantheDD,TorSTbodystyles.
Examples:RCAC20FS4012¾˝FSvalvewith1 8˝RCpilotportthreads,Shockwavediaphragm.”
Note:1 8PilotavailableinNPT,RCandGThread.¼PilotisonlyavailableinGThread.
ORDER CODE
DIMENSIONS(Dimensionsinmmand[inches])
0=1/8″1=1/4″
RCAC20FS4Diaphragm material
1=Viton2=Shockwave
Pilot size
Thread type
0=NPT1=RC2=G
0 1 2
05
GOYEN RCAC25FS4
CONSTRUCTIONBody:Aluminium(diecast)
Screws: 304Stainlesssteel
Seals: Nitrile&EPDMorViton
Diaphragm:Proprietaryhigh-performanceengineeringthermoplasticElastomerorViton
OPERATIONRecommended on-time range: 50to500ms
Recommended time between pulses:1minuteorgreater
MAINTENANCEBeforeconductinganymaintenanceactivityonthesystemensurethatcomponentsarefullyisolatedfrompressureandpowersupplies.Pressureandpowershouldnotbereapplieduntilthevalvehasbeenfullyassembled.
Diaphragmandpilotunitinspectionshouldbeconductedannually.
APPROVALSTheRCAC25FS4meetstherequirementsoftheEuropeanLowVoltageDirective2006/95/EC,whenfittedwiththeRCA3PVpilot.
REVERSEPULSEJETVALVES
Please Note:WerecommendusingSchedule40pipe.ThicknessODisasshownbelow.
SIZE OD mm OD inches
1˝ 33.4 1.315
WEIGHTS
VALVE kg (lb)
RCAC25FS4 0.85(1.87)
MAINTENANCE KITS
MODEL SHOCKWAVE VITON
Diaphragm KitRCAC25FS4 K2546 K2551
FS Outlet SealRCAC25FS4 G690763 G690763-2
PRODUCT CHARACTERISTICS AND PERFORMANCE
NOMINAL PORT SIZE mm (in.)
NO. OF DIAPH.
FLOW KV (CV)
PRESSURE RANGE kPa (psi)
TEMPERATURE RANGE °C (°F)
SHOCKWAVE VITON
25(1) 1 34(40) 30(5)to860(125)
−40(−40)to82(179.6)
−29(−20.2)to232(449.6)
DESCRIPTIONHigh-performancediaphragmvalvewithaflangedinletportandslidesealoutletport.Equippedwith‘Shockwave’springlessdiaphragm.The4seriesvalvesareavailableasremotepilotvalvesandmaybeconvertedtointegralpilotusingeithertheRCA3DMorRCA3PVscrew-inpilots.Outletisat90°toinlet.TheFSvalverangefeaturesalargerdiameterinletprovidinghigherperformancethantheDDorTbodystyles.
SUITABLE FORDustcollectorapplications,inparticularforreversepulsejetfiltercleaninganditsvariations,includingbagfilters,cartridgefiltersandenvelopefilters,ceramicfiltersandsinteredmetalfibrefilters.
Examples:RCAC25FS40121˝FSvalvewith1 8˝RCpilotportthreads,Shockwavediaphragm.
Note:1 8PilotavailableinNPT,RCandGThread.¼PilotisonlyavailableinGThread.
ORDER CODE
0=1/8″1=1/4″
RCAC25FS4Diaphragm material
1=Viton2=Shockwave
Pilot size
Thread type
0=NPT1=RC2=G
0 1 2
DIMENSIONS(Dimensionsinmmand[inches])
06
DIAPHRAGM SERVICE KITSFORDELETEDVALVES
MAINTENANCE KITS
MODEL NITRILE VITON LOW TEMPERATURE –60°C (–76°F) min.
INCLUDES
CA/RCA20FS K2000 K2007 NA
CA/RCA25FS K2501 K2503 K2504
Diaphragmkitsincludemainandsecondarydiaphragms(whererequired)andallsprings.
CLEANAIRSYSTEMS.COM
©2014PentairCleanAirSystemsreservestherighttochangeproductdesignsandspecificationswithoutnotice.
Goy
enF
lang
edV
alve
sR
ev02
11/
14
top related