flexible engineered solutions international€¦ · flexible engineered solutions international...

Flexible Engineered Solutions International Swivel System - Specification

Merchant Court, North Seaton Industrial Estate, Ashington, Northumberland, NE63 0YH, England Telephone: +44 (0) 1670 524 960 I Fax: +44 (0) 1670 524 970 I Email: fes@fesltd.co.uk Website: www.fesinternational.com

Introduction From the outset, FES have ensured that the latest technology, combined with practical experience and professional integrity has been utilised to sustain the successful achievements of the FES Fluid Swivel Systems.

Continuous engineering design / development combined with comprehensive testing programmes ensure that the FES Swivel Systems remain at the forefront of swivel design technology.

To ensure that the FES Swivel Systems are installed and commissioned successfully, an installation team including skilled and qualified engineers and technicians has been brought together to ensure that critical stages of installation are carried out in accordance with approved installation & testing procedures and methods.

Our commitment to customer satisfaction, along with experience and ability gives FES the edge in terms of service commitment and above all a flexibility that enables FES to provide a first class engineered solution.

Design Characteristics • Multi-path or single In- line swivel systems design to meet with project / client requirements • Pressure ranges from 0-15,000 PSI • Flow path size from ¼” up to 20” • Swivel system sealing system designed to operate with a diverse range of fluid media including live

Hydrocarbons incl. Sand and Solids, Stabilized Hydrocarbons, Gas, Hydraulic Oil & Various Chemicals

• Multiple sealing system available to ensure pressure integrity is maintained • Swivel sealing systems incorporating leak detection / re-cooperation system for constant

monitoring of swivel seal performance and condition • Swivel systems integrated with robust Roller & Composite Bearing systems to achieve maximum

required Axial & Radial design loads • Third party classification society design approved • Full material trace ability available in accordance with EN 10204 3.1 or 3.2 • Optimised design for maximum weight and cost savings

Typical FES FPSO Swivel Stack Arrangement

Brovig Offshore - Crystal Ocean Chestnut Field Development

Swivel Scope of Supply:

• 6” Production Export Swivels 5,000 PSI Design Pressure

• Multi path Hydraulic Swivel 5,000 PSI Design Pressure

• Multi path Utility Swivel 5,000 PSI Design Pressure

• Multi path Chemical Swivel 5,000 PSI Design Pressure

• Electrical Slip Ring

Upstream Petroleum - Crystal Ocean Basker/Manter Field Development

FPSO repurposed for redeployment to Basker/Manter Development. Swivel Operating Scope Updated to:

• 6” Production Export Swivels 5,000 PSI Design Pressure

• Multi path Hydraulic Swivel 7,500 PSI Design Pressure

• Multi path Utility Swivel 7,500 PSI Design Pressure

• Multi path Chemical Swivel 7,500 PSI Design Pressure

• Electrical Slip Ring

Vanguard- Four Vanguard Woollybutt Development

Swivel Scope of Supply: • 6” Production Export Swivels 5,000 PSI Design Pressure

• 3” Gas Injection Swivels 5,000 PSI Design Pressure

• Multi path Hydraulic Swivel 5,000 PSI Design Pressure

• Multi path Utility Swivel 5,000 PSI Design Pressure

• Multi path Chemical Swivel 5,000 PSI Design Pressure

• Electrical Slip Ring

Petrofac - Ikdam Oudna Field Development

Swivel Scope of Supply: • 6” Production Export Swivels 5,000 PSI Design Pressure

• 6” Water Injection Swivels 5,000 PSI Design

• 4” Utility Swivel 3,000 PSI Design

ECO – MV Vice Adm. K.R. Wheeler Various Deployments Worldwide

Swivel Scope of Supply: • 8 Channel Multi path Hydraulic Control Swivel 5,000 PSI Design

Pressure

• 6” Production Swivels 5,000 PSI Design Pressure

• Electrical Slip Ring

Helix Energy – Helix Producer Phoenix Field Development

Swivel Scope of Supply: • 6” Production Export Swivels 5,000 PSI Design Pressure

• 2 off 8 channel Multi path Hydraulic / Chemical Injection Swivels 10,000 PSI Design Pressure

• 1 off 7 channel Multi path Hydraulic / Chemical Injection Swivels 10,000 PSI Design Pressure

• 1 off 6 channel Multi path Utility Swivel 5,000 PSI Design Pressure

• 1 off 6” Gas Injection Swivel 3,000 PSI Design Pressure

• Electrical Slip Ring

Rubicon – Intrepid Galoc Field Development

Swivel Scope of Supply: • 2 off 6” Production Import Swivels 5,000 PSI Design Pressure

• 4 off 10 channel Multi path Hydraulic Swivels 5,000 PSI Design Pressure

• Electrical Slip Ring

Leak Detection System

Using hydraulic cylinder positioning sensors within the leak detection control cabinet, the FES Leak Detection System can be connected to constantly monitor the swivels for leaks. This information is fed back to the PLC where alarms are set to alert the operators when a leak is detected.

FES Swivel Testing Facility

Third Party Approved Static / Dynamic Pressure Test, Breakout, Running Torque and Axial Load Testing with Data Logging Capability