fm-200 - · pdf filerotarex firedetec® pre-engineered systems provide easy-to-fit,...
Post on 06-Feb-2018
224 Views
Preview:
TRANSCRIPT
A NEW KIND OF FIRE SUPPRESSION SYSTEM
Rotarex FireDETEC pre-engineered systems provide easy-to-fit, exceptional clean agent protection for critical machinery and equipment. Suitable for cabinet, communication, small enclosure and machine fire protection. FireDETECs flexible tube technology detects and triggers immediate release of the agent, ensuring rapid fire suppression. Available with FM-200, the FireDETEC systems for INSIDE of high risk equipment are flexible, efficient, cost effective and easy to install.
FM-200 SYSTEMSCOMBINING VALUE AND PERFORMANCE
Rotarex North America has drawn on decades of experience in the fire protection industry to bring you FireDETEC: a ready-made and highly cost-effective fire suppression system, that when using our simple four-step system calculation guide, you can install directly into any high-risk machinery or equipment.
1. Flexible sensor tubing The flexible tubing is installed inside the equipment directly above the
circuitry and mechanics where a fire could start. The tubing is pressurized with dry nitrogen to 240 psi.
2. Detects fire in seconds The heat produced when a fire ignites, or immediately before a fire starts,
causes the sensor tube to burst at the hottest point(approx. 240 F)releasing pressurized nitrogen, moving the piston, and opening the valve assembly.
3. Fast suppression The pressure differential valve opens, agent flows through the piping
network and is discharged through the nozzles with seconds, suppressing the fire, minimizing damage and repair downtime.
CNC MACHINES
ELECTRICAL CABINETS
FUME CABINETS
Electrical circuitry - Electrical Cabinets - Control Boxes - Recharging stations - Switch panels - Relay stations
Oils, chemicals and open flame - Fume Cabinets - Paint & Chemical storage - Petroleum storage tanks - Hydraulic circuits
Machinery - CNC Machines - Test Production Equipment
- Pumping Stations - Medical Production Equipment
Class A Class B Class C
24/7 PROTECTION
Automatically detects and suppresses fires at the source in seconds, without electronics.
PLUG & PLAY SIMPLICITY
Five ready-made clean agent systems available - pre-tested, pre-approved and configured to meet
most applications.
FAST & EFFECTIVE
When fire starts, the tube bursts, releasing
the agent immediately, preventing equipment
damage and minimizing down time.
OTHER APPLICATIONS
- Diesel Generators - Wind Turbines - Pumping Stations - Elevators & Escalators - Battery Charging Stations - Medical Labortory Equipment - Test/Production Equipment - Cable Ducts - Transmitters
GETTING CLOSERTO WHERE FIRES START
HOW FIREDETEC
SYSTEMS WORK
ALL RIGHTS OF CHANGE RESERVED
Dupont and FM-200 are registred trademarks of Dupont - used under license
SYSTEM CALCULATION GUIDEVisit us at www.firedetec.com
and download our system calculation guide.
www.rotarex.com
FireDETEC components are UL and FM Approved when installed in a properly configured system according to NFPA 2001 standards.
FireDETEC systems are available with Dupont FM-200 clean agent.
ROTAREX North America221 Westec Drive
Mount Pleasant, PA 15666
PRE ENGINEERED SYSTEM
CALCULATION GUIDE
www.rotarex.com
US HEADQUARTERS
ROTAREX North America221 Westec DriveMount Pleasant, PA 15666Tel.: +724 696 4340Fax: +724 696 4364www.firedetec.com
EVERYTHING YOU NEED TO CONFIGURE A COMPLETE SYSTEM
Configure the system yourself by choosing from the available components / accessories
Sensor tubing Mounting clips Fittings End of line devices Discharge nozzles
INDIRECT (ILP) DIRECT (DLP)
top related