for instructional videos and more go to … · 13.5, 13th floor, menara lien hoe, persiaran...
Post on 19-Aug-2020
1 Views
Preview:
TRANSCRIPT
X9304-0920 DOM size: 28.55” x 15” get the final die line from vendor Press bracket firmly for 30 seconds.
TAPE HERE
SEE BACK
SEE REVERSE FOR STEPS 7-9.
TAPE HERE
SEE OTHER SIDE FOR STEPS 1-6
FOR INSTRUCTIONAL VIDEOSAND MORE GO TO
FOR INSTRUCTIONAL VIDEOSAND MORE GO TO
www.Hotwheels.com/walltracks
Keep these instructions for future reference as they contain important information.
CONTENTS:
START HERE: Hang Template
NOTE TO PARENTS: Before applying Command® Strips make sure the wall surface is clean and dry. If cleaning is necessary 3M recommends using isopropyl rubbing alcohol. Do not use household cleaners.
Lie template flat and level against wall and tape as shown. The top of template should align with the height of the child.
Please read all instructions before beginning assembly and set-up.
1
3
Assemble Track Pieces6
4
Apply Labels
Pre-assemble pieces as shown.
5
Hang Track on Wall Once brackets are mounted and TEMPLATE IS REMOVED FROM WALL, attach track pieces as shown. 7
Let's Play!
ConnectCreate your own set-ups with other Wall Tracks™ sets.
8
Reattaching & RemovalMounting brackets are designed to break away from the set without causing surface damage. If mounting plate separates from bracket, snap bracket back into place.
To remove brackets from the wall entirely:1. NEVER pull strip towards you. 2. Hold bracket gently to prevent it from
snapping fingers. DO NOT press against wall.
3. Grab tab on Command® Strip and SLOWLY STRETCH STRAIGHT DOWN ALONG WALL AT LEAST 12 INCHES until bracket and strip release.
Purchase medium Command® Refill Strips to reapply to your wall.
9
30 cm12"
Remove track pieces from wall prior to removing brackets.
Press bracket firmly for 30 seconds.Press bracket firmly for 30 seconds.
Press bracket firmly for 30 seconds.
Hang Brackets
Bracket should not overlap the template. Press bracket firmly onto wall and hold, pressing for 30 seconds.
Remove black-printed liner from Command® Strips and attach each bracket into the designated notch of the template as shown.
CORRECTCORRECT
INCORRECTINCORRECT
Red arrow should line up with arrow on bracket.
Remove TemplateOnce all brackets are firmly attached with red arrows correctly oriented, remove template. Note: For optimal adhesion performance 3M recommends waiting 1 hour before adding weight to Command® Strips.
STRIPS
®
Prepare Brackets Red Printing = On Bracket
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MURCoté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MUR Coté MUR Coté MUR
There are 2 yellow brackets [Marked A – B], 2 flat brackets and 5 Command® Strips (1 extra strip).Separate strips. Remove red-printed liner from Command® Strips and apply to back of brackets as shown. Make sure the strip tab is accessible for future removal. NOTE: DO NOT PULL BRACKET
OFF WALL without reading removal instructions in step 9.NOTE: Apply strips to surfaces above 50°F (10°C).
Adhesive could lose adhesion above 105°F (40°C).
CAUTION:DO NOT use with wallpaper. May not adhere well to vinyl surfaces.DO NOT hang items over beds.
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MUR Coté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side
WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MURCoté MUR
WALL sidelado de la PARED lado de la PARED
lado de la PAREDlado de la PAREDWALL side WALL side WALL side WALL side
WALL side
Coté MUR Coté MUR
Coté MUR
STRIPS
®
2
Black Printing = On Wall
YOU WILL NEED:
20 minutes
3’2’2’ Approximately 3 feet by 2 feet of
open wall space
Low-adhesive tape such as painter’s tape or masking tape
Press bracket firmly for 30 seconds.
Hanging TemplateSEESAW SMASH™SEESAW SMASH™
4+
X9304-0920Asst. V1049
©2013 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867.
Command® Strips are a product of 3M. For further information visit command.com
NOTE: Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
CAUTION:DO NOT use with wallpaper. May not adhere well to vinyl surfaces.
DO NOT hang items over beds.
3M and Command are trademarks of 3M. © 3M 2013. All Rights Reserved.
PRESS FIRMLYFOR 30 SECONDS
PRESS FIRMLYFOR 30 SECONDS
Bracketsshould
NOToverlap
template
FOR VIDEOS AND MORE INFORMATION ON HANGING MULTIPLE SETS, GO TO
FOR VIDEOS AND MORE INFORMATION ON HANGING MULTIPLE SETS, GO TO
www.Hotwheels.com/walltrackswww.Hotwheels.com/walltracks
BACK VIEW
STRIPS
®
STRIPS
®
STRIPS
®
STRIPS
®
STRIPS
®
STRIPS
®
STRIPS
®
1.
2.
1.
a2. b c
STRIPS
®
STRIPS
®
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
mandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommaStri
Comm
S
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommaStri
Comm
S
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrip
CommandStrips
CommanSt
Comm
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
BACK VIEW
a b c
1.
Helpful Hint: Apply label before assembly by number as indicated.
L1
L1
L1
Press bracket firmly for 30 seconds.
TAPE H
ERE
FOR INSTRUCTIONAL VIDEOSAND MORE GO TO
FOR INSTRUCTIONAL VIDEOSAND MORE GO TO
www.Hotwheels.com/walltracks
Keep these instructions for future reference as they contain important information.
Hanging TemplatePOWER PULLEY ™POWER PULLEY ™
4+
PRESS FIRMLYFOR 30 SECONDS
PRESS FIRMLYFOR 30 SECONDS
Bracketsshould
NOToverlap
templateYOU WILL NEED:
Low-adhesive tapesuch as painter’stape or masking tape
20 minutes
Approximately 3 feet by 2 feet of open wall space
CONTENTS:
START HERE: Hang Template1
Please read all instructions before beginning assembly and set-up.
Prepare Brackets
Red Printing = On Bracket
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MURCoté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MUR Coté MUR Coté MUR
There are 2 yellow brackets [Marked A – B], 1 flat bracket and 4 Command® Strips (1 extra strip).Separate strips. Remove red-printed liner from Command® Strips and apply to back of brackets as shown. Make sure the strip tab is accessible for future removal.
NOTE: DO NOT PULL BRACKET OFF WALL without reading removal instructions in step 9.
NOTE: Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
CAUTION:DO NOT use with wallpaper. May not adhere well to vinyl surfaces.DO NOT hang items over beds.
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MUR Coté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MUR
Coté MUR
WALL sidelado de la PARED lado de la PARED lado de la PARED
lado de la PAREDWALL side WALL side WALL side WALL side
WALL side
Coté MURCoté MUR Coté MUR
Coté MUR
Coté MURCoté MUR
WALL sidelado de la PARED lado de la PARED
lado de la PAREDlado de la PAREDWALL side WALL side WALL side WALL side
WALL side
Coté MUR Coté MUR
Coté MUR
STRIPS
®
2
Black Printing = On Wall
Lie template flat and level against wall and tape as shown. The topof template should align withthe height of the child.
Press bracket firmly for 30 seconds.
STRIPS
®
Hang Brackets
Press bracket firmly onto wall and hold, pressing for 30 seconds.
Remove black-printed liner from Command® Strips and attach each bracket into the designated notch of the template as shown.
3
CORRECTCORRECT INCORRECTINCORRECT
Red arrow should line up with arrow on bracket.
Once all brackets are firmly attached with red arrows correctly oriented, remove template.
Note: For optimal adhesion performance 3M recommends waiting 1 hour before adding weight to Command® Strips.
4
Assemble Track PiecesPre-assemble pieces as shown.
5 Apply LabelsHelpful Hint: Apply labels beforeassembly by number as indicated.
6Press bracket firmly for 30 seconds.
Press bracket firmly for 30 seconds.
SEE BACK
SEE REVERSE FOR STEPS 7-9.
NOTE TO PARENTS: Before applying Command® Strips make sure the wall surface is clean and dry. If cleaning is necessary 3M recommends using isopropyl rubbing alcohol. Do not use household cleaners.
Remove Template
Bracket should not overlap the template.
STRIPS
®
STRIPS
®
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommaStri
Comm
S
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommandStrips
CommaStri
Comm
S
STRIPS
®
Connect Create your own set-ups with other Wall Tracks™ sets.
X9305-0920Asst. V1049
©2013 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867.
Command® Strips are a product of 3M. For further information visit command.com
NOTE: Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
CAUTION:DO NOT use with wallpaper. May not adhere well to vinyl surfaces.
DO NOT hang items over beds.
3M and Command are trademarks of 3M. © 3M 2013. All Rights Reserved.
FOR VIDEOS AND MORE INFORMATION ON HANGING MULTIPLE SETS, GO TO
FOR VIDEOS AND MORE INFORMATION ON HANGING MULTIPLE SETS, GO TO
www.Hotwheels.com/walltrackswww.Hotwheels.com/walltracks
SEE OTHER SIDE FOR STEPS 1-6
Hang Track on WallOnce brackets are mounted and TEMPLATE IS REMOVED FROM WALL, attach track pieces as shown.
7 Let's Play!8
Reattaching & RemovalMounting brackets are designed to break away from the set without causing surface damage. If mounting plate separates from bracket, snap bracket back into place.
To remove brackets from the wall entirely:1. NEVER pull strip towards you. 2. Hold bracket gently to prevent it from snapping
fingers. DO NOT press against wall. 3. Grab tab on Command® Strip and SLOWLY STRETCH
STRAIGHT DOWN ALONG WALL AT LEAST 12 INCHES until bracket and strip release.
Purchase medium Command® Refill Strips to reapply to your wall.
9
30 cm12"
Remove track pieces from wall prior to removing brackets.
1.
3.
2.
X9305-0920 DOM size: 15” x 21” get the final die line from vendor TAPE HERE
1. 2. 3.
STRIPS
®
STRIPS
®
3.
2.
1. 2. 3.
1.
BACK VIEW
L4
L4
L2
L2
L3 L3
L1 L1
L4
L2
L3
L1
3’3’2’2’2’
top related