gaskets - sealxsupply.com · as a sheet or cut gaskets, both supplied in either standard or...
Post on 05-Apr-2018
261 Views
Preview:
TRANSCRIPT
8
From compound asbestos free and PTFE sheets, our sealing solutions.
GASKETSINDEX OF GASKETS
SX 2200 10SX 2201 11SX 2202 12SX 2203 13SX 2204 14SX 2205 15SX 2206 16SX 2207 17SX 2208 18SX 2209 19SX 2210 20SX 2211 21SX 2213 22SX 2214 23SX 2600 24SX 2601 25SX 2602 26
COMPRESSED SYNTHETIC FIBRE JOINTING SHEETSSeal X offers a number of asbestos free synthetic fibre jointing sheets designed for a wide range of applications required for specific sealing solutions. A wide range of grades are available for many different applications. The jointing can be supplied as a sheet or cut gaskets, both supplied in either standard or non-standard dimensions.
PTFE PRODUCTSSeal X offers a comprehensive range of modified and expanded PTFE sealing products designed for applications where chemical resistance is paramount or where food safety is a requirement. Our modified PTFE is reinforced with heat resistant filler. The modification of the molecular structure of the polymer and a special production process that determines the isotropic orientation of the components in the plane of the gasket, form the basis of the outstanding mechanical characteristics of this material that combine with the already well-known excellent chemical properties of the PTFE. The seal capacity is excellent at low compression and at elevated temperatures.
APPLICATIONSSeal X products are recommended for reducing leakages with chemically aggressive substances.These products are ideal for the chemical, petro-chemical, paper mill, oil, gas, food, and pharmaceutical applications.
We strive to provide customers with leading solutions and high performance products to suit all specific needs. Please contact our Technical Sales Team
10
SX2200 GASKETS SX2201 GASKETS
SX 2200
Code: wdb20
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 4
Continual 140 steam 120
Max. working temperature °C
Peak 210
Application: water, gas, oil, alcohol, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,7 – 2,1 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 20 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,1 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 15 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 15 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING YELLOW – branded on one side
SX 2200
DIN 28 091 – 2 FA-Z-12-0
ASTM F 104 F 712 120 M4
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
SX2201
Code: wdb07
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 6
Continual 220 steam 180
Max. working temperature °C
Peak 250
Application: water, water vapour, gas, oil, alcohol, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,6 – 2,0 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 20 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 45 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,06 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 5 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING GREEN – branded on one side
SX2201
DIN 28 091 – 2 FA-MA-1-0
ASTM F 104 F 712 111 M4
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
12
SX2202 GASKETS SX2203 GASKETS
SX2202
CSF Sheet Jointing
TEMASIL NEW GENERATION
Code: wdb22
www.sealxsupply.com
Page: 1 of 1 Approved: 3.1.2012 Valid since: 4.1.2012
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 10
Continual 250 steam 200
Max. working temperature °C
Peak 400
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,7 – 2,0 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 30 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,06 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING BLUE – branded on one side
SX2202
DIN 28 091 – 2 FA-MA-1-0
ASTM F 104 F 712 111 M5
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
SX2203
Code: wdb23
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 12
Continual 250 steam 200
Max. working temperature °C
Peak 400
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,9 – 2,2 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 32 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,08 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING BLACK (both sides graphited) – branded on one side
SX2203
DIN 28 091 – 2 FA-MA-1-ST
ASTM F 104 F 712 111 M7
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
14
SX2204 GASKETS SX2205 GASKETS
SX2204
Code: wdb17
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 12
Continual 330 steam 250
Max. working temperature °C
Peak 450
Application: water, water vapour, vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,7 – 2,0 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 32 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 55 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,04 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING LIGHT BLUE – branded on one side
SX2204
DIN 28 091 – 2 FA-M-1-0
ASTM F 104 F 712 111 M6
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
SX2205
Code: wdb01
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 13
Continual 250 steam 200
Max. working temperature °C
Peak 450
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,6 – 1,9 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 32 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,03 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING GREEN – branded on one side
SX2205
DIN 28 091 – 2 FA-AM-1-0
ASTM F 104 F 712 111 M6
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
16
SX2206 GASKETS SX2207 GASKETS
SX2206
Code: wdb03
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 10
Continual 250 steam 250
Max. working temperature °C
Peak 450
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,6 – 1,9 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 32 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,05 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING BLACK – branded on one side
SX2206
DIN 28 091 – 2 FA-CA-1-0
ASTM F 104 F 712 110 M6
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
SX2207
Code: wdb14
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 13
Continual 250 steam 250
Max. working temperature °C
Peak 450
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,8 – 2,1 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 34 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 55 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,06 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5,5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING BLACK – branded on one side
SX2207
DIN 28 091 – 2 FA-CA-1-ST
ASTM F 104 F 712 110 M7
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
18
SX2208 GASKETS SX2209 GASKETS
SX2208
Code: wdb23
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 12
Continual 250 steam 200
Max. working temperature °C
Peak 400
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,9 – 2,2 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 32 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,08 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING BLACK (both sides graphited) – branded on one side
SX2208
DIN 28 091 – 2 FA-MA-1-ST
ASTM F 104 F 712 111 M7
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
SX2209
Code: wdb24
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 14
Continual 330 steam 250
Max. working temperature °C
Peak 450
Application: water, water vapour, vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,9 – 2,2 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 32 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 55 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,04 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 3 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING LIGHT BLUE – branded on one side
SX2209
DIN 28 091 – 2 FA-M-1-ST
ASTM F 104 F 712 111 M7
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
20
SX2210 GASKETS SX2211 GASKETS
SX2210
Code: wdb06
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 14
Continual 250 steam 200
Max. working temperature °C
Peak 450
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,8 – 2,2 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 34 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,04 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C max. % 4 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C max. % 5 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING GREEN – branded on one side
SX2210
DIN 28 091 – 2 FA-AM-1-ST
ASTM F 104 F 712 111 M7
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
SX2211
Code: wdbxx
www.sealxsupply.com
Page: 1 of 1 Approved: 31.10.2011 Valid since: 1.11.2011
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 10
Continual 250 steam 220
Max. working temperature °C
Peak 350
Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,7 – 2,0 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 32 DIN 52 913
COMPRESSIBILITY % 6 – 10 ASTM F 36 – J
RECOVERY min. % 55 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,05 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
ASTM OIL - IRM 903, !SN ISO 1817
5 h/150 °C ! % 2 ASTM F 146
ASTM FUEL B - !SN ISO 1817
5 h/23 °C ! % 4 ASTM F 146
FLEXIBILITY no craks and breaks ASTM F 147
Te
stin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING BLACK – branded on one side
SX2211
DIN 28 091 – 2 FA-AZ-1-0
ASTM F 104 F 712 110 M6
Note:
a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm
22
INFORMATIVE
Max. working pressure MPa 13
Max.working temperature oc
Continual 400 steam 350
Peak
450
Application : water ,water vapor, vapor,gas, oil ,alcohol,fuel,basic chemicals, cooling liquid
TECHNICALS PARAMETERS Corresponding standard
.
DENSITY g.cm3 1,7-2,0 DIN28 090 - 2
RESIDUAL STRESS* 16 h/175/300°C
RESIDUAL STRESS* 16 h/300°C
MPa
32 / 25 25
DIN 52 913 BS 7531
COMPRESSIBILITY
RECOVERY
% 5 -15 ASTM F36-J
% 60 ASTM F36-J
SPEC.LEAKAGE RATE mg/(s.m) 0,02 DIN 3535 -6
FLUIDRESISTANCE-THICKNESSCHANGE
ASTM OIL - IRM 903, CSN ISO 1817
5 h/150 •c
%
3 ASTM F 146
ASTM FUEL B - CSN ISO 1817
5 h/23 °C
%
5 ASTM F 146
FLEXIBILITY no cracks and breaks ASTM F 147
COLOR AND PRINTING BLUE-brandedononeside
SX 2214 DIN 28 091- 2 FA-MAZ ASTM F 104 F 712 122 BS 7531 GRADE AX
Note: a) parameters are valid for thickness 2,0 mm b) •value validfor thickness 1,5 mm
CERTIFICATION:
Code:wdb33
Page:1of 1 Approved: 22.3.2012 Valid since: 24.3.2012
SX 2214
www.sealxsupply.com
SX2213 GASKETS SX2214 GASKETS
SX2213
Code: wdb05
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 4
Continual 150 steam 130
Max. working temperature °C
Peak 200
Application: acid, hydroxid, oil, cooling liquid, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,7 – 2,1 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 20 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,1 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
SULPHURIC ACID 96% max. % 16 -
HYDROGEN CHLORIDE 36% max. % 15 -
NITRIC ACID 50% max. % 7 -
FLEXIBILITY no craks and breaks ASTM F 147 T
estin
g a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING GREY – branded on one side
SX2213
DIN 28 091 – 2 FA-A-4Z-0
ASTM F 104 F 712 122 M5
Note:
a) parameters are valid for thickness 2,0 mm
b) * value valid for thickness 1,5 mm
SX2213
Code: wdb05
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
Interference with this document is prohibited.
CERTIFICATION:
INFORMATIVE
Max. working pressure MPa 4
Continual 150 steam 130
Max. working temperature °C
Peak 200
Application: acid, hydroxid, oil, cooling liquid, basic chemicals
TECHNICALS PARAMETERS Corresponding
standard
DENSITY g.cm-3 1,7 – 2,1 DIN 28 090 - 2
RESIDUAL STRESS* 16 h/175 °C ! MPa 20 DIN 52 913
COMPRESSIBILITY % 5 – 15 ASTM F 36 – J
RECOVERY min. % 50 ASTM F 36 – J
SPEC. LEAKAGE RATE ! mg/(s.m) 0,1 DIN 3535 – 6
FLUID RESISTANCE – THICKNESS CHANGE
SULPHURIC ACID 96% max. % 16 -
HYDROGEN CHLORIDE 36% max. % 15 -
NITRIC ACID 50% max. % 7 -
FLEXIBILITY no craks and breaks ASTM F 147
Testing a
cc.
to
TP
62-0
85
-10
COLOR AND PRINTING GREY – branded on one side
SX2213
DIN 28 091 – 2 FA-A-4Z-0
ASTM F 104 F 712 122 M5
Note:
a) parameters are valid for thickness 2,0 mm
b) * value valid for thickness 1,5 mm
24
SX2600 GASKETS SX2601 GASKETS
SX2600 Technical Sheet
SX2600 Compression moulded PTFE
CHARACTERISTICS Improved compression and wear resistance; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity.
Main applications:It is the most commonly used filler for dynamic seal applications where both rotating and alternating movements are involved, pneumatic, hydraulic and mechanical parts. Bearings; Seals; Gaskets.
Statement on suitability for contact with food:We certify that our ptfe products are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 § 177.1550 (a) (1) and (b)-Perfluorocarbon Resins.
The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item’s technological fitness it is assigned to, may be guaranteed.
Property Method Unit Specification
SX2601 Technical Sheet
SX2601 Compression moulded PTFE
CHARACTERISTICS Excellent resistance to deformation; high recovery; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity.
Main applications:Piping systems, apparatus flanges also with reduced stress or damaged surface, seals, gaskets, valve seats, piston rings.
Statement on suitability for contact with food:We certify that our ptfe products are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 § 177.1550 (a) (1) and (b)-Perfluorocarbon Resins.
The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item’s technological fitness it is assigned to, may be guaranteed.
Property Method Unit Specification
26
SX2602
SX2602 Technical Sheet
SX2602 Compression moulded PTFE
CHARACTERISTICS Excellent resistance to deformation; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity.
Main applications:Bearings, seals, gaskets, moldings, valve seats, piston rings.
Statement on suitability for contact with foodstuff:We certify that our ptfe products, are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 § 177.1550 (a) (1) and (b)-Perfluorocarbon Resins.
The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item’s technoiogical fitness it is assigned to, may be guaranteed.
Property Method Unit Specification
top related