generative drafting (ansi)
Post on 02-Jun-2018
224 Views
Preview:
TRANSCRIPT
-
8/11/2019 Generative Drafting (ANSI)
1/148
Copyright DASSAULT SYSTEMES 2002 1
Generative Drafting(ANSI)
Version 5 Release 8January 2002
EDU-CAT-E-GDRA-FF-V5R8
CATIA TrainingFoils
-
8/11/2019 Generative Drafting (ANSI)
2/148
Copyright DASSAULT SYSTEMES 2002 2
Table of Contents (1/2)
1. Introduction to Generative DraftingGenerative Drafting Workbench Presentation
2. Starting a Drawing and View GenerationStarting a Generated DrawingDefining the Main Views
3. Additional View GenerationSection Views and CutsSecondary Views: Detail, Clipping, Broken, Breakout, Auxiliary, Isometric and Unfolded Views
4. Editing Views Layout and PropertiesEditing a View and Sheet PropertiesAdding Sheets to a DrawingRepositioning ViewsModifying ViewsModifying of Section, Detail and Auxiliary ProfilesModifying of Section, Detail and Auxiliary Graphical DefinitionsModifying a Section Hatching Representation
5. Automatic DimensioningGenerative Dimensions
Generative Dimensions (step by step)Balloons6. Finalizing the Drawing and Printing
Checking Links to a Solid 3D Part and Updating a DrawingAdding a Title BlockPrinting the Drawing
7. Setting Drafting OptionsDrafting Options and Generating Views
-
8/11/2019 Generative Drafting (ANSI)
3/148
Copyright DASSAULT SYSTEMES 2002 3
8. Drafting VisualizationsThreaded HolesUsing 3D Viewer
9. Saving a Drawing DocumentSaving a Drawing and Checking Links
Table of Contents (2/2)
-
8/11/2019 Generative Drafting (ANSI)
4/148
Copyright DASSAULT SYSTEMES 2002 4
Generative Drafting Workbench Presentation
Introduction To Generative Drafting
You wi l l b ecome famil iar wi th the Genera t ive Draft ing m ain funct ion al it ies .
-
8/11/2019 Generative Drafting (ANSI)
5/148Copyright DASSAULT SYSTEMES 2002 5
Understanding the general process Accessing the Workbench Exploring the User Interface and Terminology
Workbench Presentation
You w il l learn about the Generative Draf t ing Wor kbenc h by :
-
8/11/2019 Generative Drafting (ANSI)
6/148Copyright DASSAULT SYSTEMES 2002 6
Part Design
Assembly Design
GenerativeDrafting
The drawing can be generated at any time; if thepart or product is changed, the drawing will beautomatically updated because of the associativelink.
Design Changes
- A -Generate View(s)
Geometry
- B -Dimension
View(s)
Generative Drafting workbench and Interactive Draftingworkbench are exactly the same except for the toolsallowing to generate the views geometry from the 3Dautomatically and to dimension them automatically too.
Sketcher
Associative link
General Process
-
8/11/2019 Generative Drafting (ANSI)
7/148Copyright DASSAULT SYSTEMES 2002 7
From 1- Start menu
or 2- Workbench Icon
or 3- File menu 1
2
3
Accessing the Workbench
=
=
-
8/11/2019 Generative Drafting (ANSI)
8/148Copyright DASSAULT SYSTEMES 2002 8
Dimension propertiesText properties
Set Default Switch
Graphic Properties
Drafting Toolbars and Objects
1
2
3
4
5 67 8
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
Each toolbar contains objects that are related to specific tasks.
Objects within these toolbars are compressed and can be expanded foradditional capability by selecting the
-
8/11/2019 Generative Drafting (ANSI)
9/148Copyright DASSAULT SYSTEMES 2002 9
View Frame
View Name
and
View Scale
Grid
Active view(underlined in the tree and with a red frame)
Specifications Tree
Views
Prompt zone
Drafting Terminology
-
8/11/2019 Generative Drafting (ANSI)
10/148Copyright DASSAULT SYSTEMES 2002 10
Magnifier (on) (View Menu)
Drawing Overview (on)
View Manipulator Dial
(at Front view creationwith view wizard)
Step by step DimensionGeneration
Generative Drafting (P2 Power Tools)
-
8/11/2019 Generative Drafting (ANSI)
11/148Copyright DASSAULT SYSTEMES 2002 11
You had a quick tour of the process to create the views of a 3Dpart and how the access the Generative Drafting workbench
You have seen the general layout of the user interface,terminology and the basic principles.
In this intro du ct ion to th e Generative Draf t ing Workb ench,
To Sum Up
-
8/11/2019 Generative Drafting (ANSI)
12/148Copyright DASSAULT SYSTEMES 2002 12
Starting a Generative DrawingDefining the Main Views
Starting a Drawing and View Generation
In th is lesson y ou w i l l learn how to generate a drawing and views for a 3D
part.
-
8/11/2019 Generative Drafting (ANSI)
13/148Copyright DASSAULT SYSTEMES 2002 13
You wil l learn how to generate a drawin g direct ly f ro m a 3D part .
Starting a Generative Drawing
Guide Piece
Drawing
-
8/11/2019 Generative Drafting (ANSI)
14/148Copyright DASSAULT SYSTEMES 2002 14
A CATDrawing file contains a structurelisting of all the sheets and viewscontained in the document.
A Drawing Document is a file that is also called a CATDrawing and is identified by itsfile extension (.CATDrawing).
CATDrawing file extension
identification.
What is a Drawing?
-
8/11/2019 Generative Drafting (ANSI)
15/148Copyright DASSAULT SYSTEMES 2002 15
Ways to Generate a Drawing
1- File menu2- Start menu
3- Workbench Icon
4- New Icon
Drawing Documents (CATDrawing) can be created in various ways.
2
1
4
3
How to Start a Generative Drawing from a CATPart?
-
8/11/2019 Generative Drafting (ANSI)
16/148
Copyright DASSAULT SYSTEMES 2002 16
File Options:
New... for starting a default drawing document
New from... for starting a drawing from an existing document
Open... for opening an existing document
The New from or Open options could be forretrieving company startup documents.
Classical Method to Start Generating a Drawing
-
8/11/2019 Generative Drafting (ANSI)
17/148
Copyright DASSAULT SYSTEMES 2002 17
Setting the Drawing Sheet Format and Drafting Standards
The Modify option changes the default sheet format and the format standards.
The following items maybe set: ISO, ANSI and JIS standards Paper formats (A, B, C, or A0, A1, A2, etc..) Orientation (Landscape or Portrait) Sheet scale (1 is default and should only be changed with caution)
ISOANSIor JIS
Format settings can be modified later if necessary: for example the paperorientation or size with menu File + Page Setup...
-
8/11/2019 Generative Drafting (ANSI)
18/148
Copyright DASSAULT SYSTEMES 2002 18
Setting Third Angle Projection
2
1 Select the Properties for Sheet1
Select the option to create projection views using the thirdangle projection standard
3 Select OK to accept thechanges
After changing the Sheet properties to the third angleprojection standard, set the sheet as the default so all othersheets will be created with the same angle of projection.
-
8/11/2019 Generative Drafting (ANSI)
19/148
Copyright DASSAULT SYSTEMES 2002 19
Starting a Drawing with a Blank Sheet
2
1 Change to the DraftingWorkbench from the PartWorkbench
Select the Sheet option in the Start Wizard
3
Select OK to accept thedefault drawing standards
and Format Size
-
8/11/2019 Generative Drafting (ANSI)
20/148
Copyright DASSAULT SYSTEMES 2002 20
You wi l l l ea rn how to def ine the main v iews fo r a d rawing u s ing the ViewWizard. The geom etry wil l be generated into these views fro m th e asso ciatedPart Docu ment .
Defining the Main Views
ff f
-
8/11/2019 Generative Drafting (ANSI)
21/148
Copyright DASSAULT SYSTEMES 2002 21
Views can be associative (linked to 3D parts) or unassociative (unlinkedfrom a 3D part).
Associative (Linked) Views to a 3D part are called GENERATED VIEWS .
Unassociative (Unlinked) Views to a 3D part are called DRAW VIEWS .
GENERATED VIEWS
DRAW VIEWS
3D Part
What are the different types of Views?
C i Vi
-
8/11/2019 Generative Drafting (ANSI)
22/148
Copyright DASSAULT SYSTEMES 2002 22
1- View Wizard
2- Individually one by one
Views can be created in v arious ways :
2
1
The View Wizard is a quickway to select predefined viewconfigurations or define acustomized view configuration.
Many types of views canbe created one by one in anas needed approach.
Creating Views
C ti F t Vi (1/2)
-
8/11/2019 Generative Drafting (ANSI)
23/148
Copyright DASSAULT SYSTEMES 2002 23
Creating a Front View (1/2)
Create a front view either from a part, sub-body of a part, product, or from the sub-partof a product using a reference plane.
1
2
Start the drawing with a blank sheet
Select the Front View icon
3 Switch or activate theCATPart or CATProductdocument (window)
Note: the Front View is used as thedefining view when creatingprojection views.
C ti g F t Vi (2/2)
-
8/11/2019 Generative Drafting (ANSI)
24/148
Copyright DASSAULT SYSTEMES 2002 24
Creating a Front View (2/2)
4
5
(Optional) Select the bodies or parts to displayin the tree (use Ctrl key). If none is selected, allbodies or parts will be displayed. Or select alocal view axis to set the view origin.
Select your front view plane. A previewwill be shown on the drawing sheet.
6 Select anywhere on the drawing sheet togenerate the view
Preview of the front view
Note: When selecting a view plane, anorientation preview will be displayed whenpre-selected (highlighted under thecursor)
-
8/11/2019 Generative Drafting (ANSI)
25/148
Rotating the Front View Background with the View Manipulators (1/2)
-
8/11/2019 Generative Drafting (ANSI)
26/148
Copyright DASSAULT SYSTEMES 2002 26
Rotating the Front View Background with the View Manipulators (1/2)
clickingup arrow
clickingcenter
left arrow
clickingright arrow
Up, down, right and left arrows flipbackground plane view 90 degrees.
Center left and right arrows rotate view30 degrees in the same plane. The 30degrees increment can be changed withthe contextual menu on the dial.
Before accepting the view, it can be reoriented with the viewmanipulator
When finished, click on dialcenter or anywhere on sheetto generate the Front View.
Rotating the Front View Background with the View Manipulators (2/2)
-
8/11/2019 Generative Drafting (ANSI)
27/148
Copyright DASSAULT SYSTEMES 2002 27
Rotating the Front View Background with the View Manipulators (2/2)
Set the increment of Rotation
View Manipulator contextual menu settings Set the angle of Rotation
Set free Rotation
Adding a Projection View on a Drawing
-
8/11/2019 Generative Drafting (ANSI)
28/148
Copyright DASSAULT SYSTEMES 2002 28
To add a view on this drawing
Select desired location to place the view
1
4
Adding a Projection View on a Drawing
A preview of theprojection view
appears.
With the ANSI Standard, a Bottom view is generated.
Activate the view (front) to projectfrom (blue axes on and underlined intree). Select the View Projection icon
2
Move cursor where View is to be projected 3
The View Wizard
-
8/11/2019 Generative Drafting (ANSI)
29/148
Copyright DASSAULT SYSTEMES 2002 29
The View WizardThe VIEW WIZARD provid es the abi l i ty to quic kly c reate a variety ofstandard view configurat ions o r bui ld a specif ic view con figurat ion.
View Wizard
Front, Top and Left Views
Front, Bottom and RightViews
View Wizard (Step 1)Predefined viewconfigurations.
View Wizard (Step 2)Individual viewchoices for creating aspecific viewconfiguration.
All Views
Add, delete and rearrange the views as needed.
Generating Main Views with the View Wizard Quick Method (1/3)
-
8/11/2019 Generative Drafting (ANSI)
30/148
Copyright DASSAULT SYSTEMES 2002 30
Generating Main Views with the View Wizard Quick Method (1/3)
The process to u se the view w izard to quick ly bui ld view s on a blank drawing sheet .
Select one of the view configuration and theNext button for additional views
Select and place any additional views(Isometric view) to the existing viewconfiguration and select the Finish button2
3
Select View Wizard1
Generating Main Views with the View Wizard Quick Method (2/3)
-
8/11/2019 Generative Drafting (ANSI)
31/148
Copyright DASSAULT SYSTEMES 2002 31
Generating Main Views with the View Wizard Quick Method (2/3)A preview of your view configuration appearson the drawing sheet.
54 Select the face on the 3D part for theFront view background plane.
A preview of the Front viewappears in Part DesignWorkbench when pre-selected(highlighted) by the cursor If needed, use the View Manipulator to
reorient the Front view.
To preview a view, move the cursor to the green preview boxof the desired view
-
8/11/2019 Generative Drafting (ANSI)
32/148
To Sum Up
-
8/11/2019 Generative Drafting (ANSI)
33/148
Copyright DASSAULT SYSTEMES 2002 33
How to generate the geometry of the main views either automatically or
manually while the part to be drawn is in the Part Design workbench
Ways to define views on a blank drawing
To Sum Up
In this lesson you have seen
Additional View Generation
-
8/11/2019 Generative Drafting (ANSI)
34/148
Copyright DASSAULT SYSTEMES 2002 34
In th is lesson you wi l lgen erate sec tion , detail ,auxi l iary, i som etr ic andbrok en views o n a drawing.
Section Views and CutsSecondary Views: Detail, Clipping, Broken, Breakout,Auxiliary, Isometric and Unfolded Views
Additional View Generation
Adding Section Views and Cuts
-
8/11/2019 Generative Drafting (ANSI)
35/148
Copyright DASSAULT SYSTEMES 2002 35
You w i l l learn how to add sec t ion v iews and sec t ion cu ts to the drawing
g
What are the different types of Sections Views ?
-
8/11/2019 Generative Drafting (ANSI)
36/148
Copyright DASSAULT SYSTEMES 2002 36
Simple offset section - a full section with a simple single cutting plane fully passingthrough the part
Complex offset section - a full section in which the cutting plane is offset to passthrough important features Complex Offset Section
Offset Sections
Simple Offset Section
Aligned Sections
Aligned sections, also called "revolved" sections, has a cuttingplane revolving around an axis
There are 3 main types of sectional views; "full section", "offset" or "aligned" dependingon how the cutting plane is defined.
Section Views and Section Cuts
-
8/11/2019 Generative Drafting (ANSI)
37/148
Copyright DASSAULT SYSTEMES 2002 37
Section View: A view of the cutting plane and any geometrythat extends beyond the cutting plane in the direction of thesight (arrows).
Section Cut : A view of only the material thatthe cutting edge touches when passingthrough the part.
Reminder of the differences of a section view (Offset or Aligned) and section cut (Offset or Aligned)
Adding a Simple Section View on a Drawing
-
8/11/2019 Generative Drafting (ANSI)
38/148
Copyright DASSAULT SYSTEMES 2002 38
Front view is active when the blue axis isvisible and the view name is underlined inthe tree. If the Frame option is set on then theframe color will be red around the activeview.
Select the circle A, double click at B, thenplace the view C
To add a section view on this drawing
The section is added
(A )
1 Activate the front view and select the desiredSection View icon
2
3 4
(B )
(C )
Use the section cut iconand the same process to
make a section cut view
2
Note : Preview appears
Adding an Aligned Section View on a Drawing
-
8/11/2019 Generative Drafting (ANSI)
39/148
Copyright DASSAULT SYSTEMES 2002 39
To add an aligned section view onthis drawing
The aligned section geometry is created
1
4
2 Activate the front view, select thedesired Aligned Section icon
2
Select the circle A, select the circle B, select the circle C, doubleclick at D and place the view at E
(A )
3
Note : Preview appears
(B )
(D )
(E)
(C )
Adding Secondary Views
-
8/11/2019 Generative Drafting (ANSI)
40/148
Copyright DASSAULT SYSTEMES 2002 40
You wi l l learn how to add secondary v iews
g y
Detail Views
Clipped Views
Isometric Views
Breakout Views
Broken Views
-
8/11/2019 Generative Drafting (ANSI)
41/148
What are secondary Views ? (2/2)
-
8/11/2019 Generative Drafting (ANSI)
42/148
Copyright DASSAULT SYSTEMES 2002 42
Secondary Views:
5) Breakout Views : A breakout view allows thecreation of a local cut (by a plane) in order to see theinside of a part without cutting it totally.
6) Auxiliary Views : An auxiliary view is a viewcreated in a given direction which is not a directionthat can be obtained with a standard view
7) Unfolded Views : An Unfolded view is a view thatcan only be obtained from a Sheet Metal part. Thiskind of view unfolds the sheet metal part inaccordance with the rules which have been appliedto the bends
5
7
6
Detail Views Types
-
8/11/2019 Generative Drafting (ANSI)
43/148
Copyright DASSAULT SYSTEMES 2002 43
Detail views can be full detail views that are calculated from the 3D part or "quick" detail viewsthat are calculated from the defining 2D projection of the view. Both types of detail views canbe defined by a callout using a circular perimeter or a profile perimeter.
1 Full Detail: The geometry for the view is calculated from the 3D
part with a boolean operation of the callouts perimeter.
Circular Callout
Profile Callout
Quick Detail: The geometry for the view iscalculated from the 2D projection of the view.
2
Profile Callout
Activate the front view, then select the2
Adding a Detail View
-
8/11/2019 Generative Drafting (ANSI)
44/148
Copyright DASSAULT SYSTEMES 2002 44
To create this detail view1
Define the center of the circle by clicking (A),click B to define the circle radius then movemouse to place the detail view at C with a click
3
(C ) (B )
(A )
The view is generated; the default enlargement is twotimes the scale of the defining view
4
Activate the front view, then select theDetail View icon or the Quick DetailView icon.
2
2
To change the default scale of thedetail view, select Properties in thecontextual menu and Parametersin View menu
Creating a Clipping ViewActivate the front view then2
-
8/11/2019 Generative Drafting (ANSI)
45/148
Copyright DASSAULT SYSTEMES 2002 45
To create this clipping view1Activate the front view, thenselect the Clipping View icon
2
Define the center of the circle byclicking (A), click B to define the circleradius
3
(B ) (A )
4 The result is displayed
The annotations which are notcutting by the clipping circle canbe see in the No Show mode.
The other Clipping iconcreates a clipping view bya profile.
h d
2
Breaking a View
-
8/11/2019 Generative Drafting (ANSI)
46/148
Copyright DASSAULT SYSTEMES 2002 46
To create this Broken view1
Select anywhere on the sheet to modify the
section view into a break through section view.
4
The second break limit can fall anywhere designated by the greendashed line. The solid red line represents the red zone for the areasthat cannot be selected for creating the second break limit.
The broken view can be restored with contextualmouse button and select UNBREAK
Activate the Section A-A view andselect the breaking a view icon
2
Define the break out area by clicking (A) the location for the first break limit line, click (B) to delimitthe height of the red area and click (C) to locate the second break limit line.
(C )
(B ) (A )
3
Area of break out
Area of break out
Note: A view can contain multiple break definitions given the definitionis in the same direction and the two breaks do not overlap.
Creating a Breakout View
-
8/11/2019 Generative Drafting (ANSI)
47/148
Copyright DASSAULT SYSTEMES 2002 47
To create the Breakout View below1
If Animate is checkedyou can visualize the3D part in accordancewith the position ofthe cursor on thedrawing
Activate the Left view and selectthe breakout view icon
2
The 3D Viewer window appears. Select an edge on a projectedview or Drag & Drop the green continuous line to define thedesired cut plane
4
Select OK in the 3D Viewerwindow. The breakout iscreated.
5
Create points which allow you to build thebreakout profile. If necessary, double-click onthe first point to close the profile
3
Can create only one simple breakout per view. Cannotgenerate another view from a breakout view. Once createdthe breakout view profile cannot be modified.
Note: A view can contain multiple breakout definitions.
Adding an Isometric View
-
8/11/2019 Generative Drafting (ANSI)
48/148
Copyright DASSAULT SYSTEMES 2002 48
Select the Isometric icon1
3 A preview of the Isometric View displays
4 Select anywhere on the drawing togenerate the view
(A )
2 Select a face on the part in the Part orProduct document
If needed, use the View Manipulator toreorient the Isometric view.
l h d
Adding an Exploded Isometric View using a Scene
-
8/11/2019 Generative Drafting (ANSI)
49/148
Copyright DASSAULT SYSTEMES 2002 49
Select the Isometric icon1
3 A preview of the Isometric View displays
4 Select anywhere on the drawing togenerate the view
2 Select a Scene in the Part or Productdocument and a view orientation
T t th ili i
1 2Active the front view and select the auxiliary view icon
Adding an Auxiliary View
-
8/11/2019 Generative Drafting (ANSI)
50/148
Copyright DASSAULT SYSTEMES 2002 50
To create the auxiliary viewbelow
(A )
1 2y
3 Sketch the representation of the plane (A) or select an edge(B) on the drawing and drag the mouse to see the preview ofthe auxiliary view.
(B ) Select anywhere on the drawing to create the auxiliary view.4
To double-click on an arrow allows to invert the profile with theInvert Profile Direction icon ( ).
Select End Profile Edition icon ( ) to return on thedrawing.
2 Select the first wall of the Sheet Metal part as a 3DSelect the Unfolded view icon1
Creating Unfolded Views with dashed Bend Lines
-
8/11/2019 Generative Drafting (ANSI)
51/148
Copyright DASSAULT SYSTEMES 2002 51
To not generate the bendlines, uncheck the CenterLine and Axis options inthe dressup Propertiespanel
3 Select anywhere to generate the unfolded view on thedrawing
2 preference and choose the reference axis system.
Select the Unfolded view icon 1
Dashed bend lines
To Sum Up
-
8/11/2019 Generative Drafting (ANSI)
52/148
Copyright DASSAULT SYSTEMES 2002 52
How to add section views and section cuts to a drawing
How to add secondary views
In this lesson you have seen
Editing Views Layout and Properties
-
8/11/2019 Generative Drafting (ANSI)
53/148
Copyright DASSAULT SYSTEMES 2002 53
In th is lesson y ou w i l l change the layou t of v iews on a drawing and changethe prop er t ies of th e v iews.
Editing a View and Sheet PropertiesAdding Sheets to a DrawingRepositioning ViewsModifying ViewsModifying of Section, Detail and Auxiliary
ProfilesModifying of Section, Detail and AuxiliaryGraphical DefinitionModifying a Section Hatching Representation
Editing view and sheet properties
-
8/11/2019 Generative Drafting (ANSI)
54/148
Copyright DASSAULT SYSTEMES 2002 54
You wi l l learn how to edi t the v iew and sheet proper t ies .
View and Sheet properties control all the variables related to specific views and sheets of
What are view and sheet properties?
-
8/11/2019 Generative Drafting (ANSI)
55/148
Copyright DASSAULT SYSTEMES 2002 55
View and Sheet properties control all the variables related to specific views and sheets ofthe drawing.
2 Select the View or Graphic tab and change thei h
View Properties
-
8/11/2019 Generative Drafting (ANSI)
56/148
Copyright DASSAULT SYSTEMES 2002 56
Select the view to modify in the tree or Viewframe and Properties with the contextualmenu
A
B
C
1necessary options, here :(A) View name(B) Dressup to have fillets on(C) Visualization to remove the frame
Multi-selection of views is allowed ona single sheet or on different sheets
Select the Sheet (Sheet1) in the tree and Properties in the
1
Sheet Properties
-
8/11/2019 Generative Drafting (ANSI)
57/148
Copyright DASSAULT SYSTEMES 2002 57
( ) pcontextual menu to change its name.
2
Use this option to generate the views on the sheetusing the 3rd angle projection method (ANSI)
Modify the Sheet name, scale, or projection method(ANSI or ISO).
(1)
(2)
-
8/11/2019 Generative Drafting (ANSI)
58/148
Sheets are added to a drawing to improve clarity and manage views or
Why add sheets to a drawing?
-
8/11/2019 Generative Drafting (ANSI)
59/148
Copyright DASSAULT SYSTEMES 2002 59
annotations that are cluttering a single sheet drawing.
Sheet 1 of 2 Sheet 2 of 2
Adding a sheet to a drawing
-
8/11/2019 Generative Drafting (ANSI)
60/148
Copyright DASSAULT SYSTEMES 2002 60
Select the New Sheet iconIt creates an empty sheet with the nextsheet number (Sheet 2)
1
The new sheet is assigned the samestandard, format and orientation as thefirst created sheet
You w i l l l ea rn how to r epos i t ion v iews on a s ing le sheet and how to m ove v iews
Repositioning Views
-
8/11/2019 Generative Drafting (ANSI)
61/148
Copyright DASSAULT SYSTEMES 2002 61
p gfrom on e sheet to another sh eet .
Views can b e repos i t ioned in fou r d i fferent w ays . 3
Repositioning views on a single sheet
-
8/11/2019 Generative Drafting (ANSI)
62/148
Copyright DASSAULT SYSTEMES 2002 62
Repositioning Views Options:
1 Maintaining alignment with Parent Front view
2 Without maintaining alignment with Parent Front view
3 Relative positioning
4 Text and View positioning tool
The Parent Front view relationship is established when views are addedfrom the front view or created with the Wizard. These children viewswill maintain the alignment link with the parent front view unless thealignment is broken.
1
2
4
Repositioning views on sheet
A view can be reposi t ioned (moved) to another locat ion
-
8/11/2019 Generative Drafting (ANSI)
63/148
Copyright DASSAULT SYSTEMES 2002 63
Select the frame of the view to move and drag it tothe correct position
2 Select the Do not align views in the contextual menu firstif the desired position is to be not aligned with the Frontview.
1
View frame
p ( )
Multi-selection of views is allowed
-
8/11/2019 Generative Drafting (ANSI)
64/148
Select View Positioning then Set RelativePosition in the contextual menu
Repositioning a view with Relative Positioning (1/2)
1
-
8/11/2019 Generative Drafting (ANSI)
65/148
Copyright DASSAULT SYSTEMES 2002 65
Position in the contextual menu
A positioning stick appears with anchor points around the viewand in its center
Anchors points
Positioning Stick
The stick has 3 handles:- the green end- the stick
- the black end
By default, the green handle ison the center anchor point andthe stick is oriented SW(south-west).
Note: Remember the contextual menu can be accessed from thetree structure or the view frame. Therefore, the view frame doesnot need to be on to use the relative positioning option.
Repositioning a view with Relative Positioning (2/2)There are 4 ways to move a view with the positioning stick
You need to combine these to position the view
2
-
8/11/2019 Generative Drafting (ANSI)
66/148
Copyright DASSAULT SYSTEMES 2002 66
Stick length and distances values appear. Drag along the stickto make it shorter or longer: the view moves accordingly.
(C) Selecting the green handle
The green end moves tothe selected anchor pointand the view is moved(ex. here bottom middleanchor was selected;view moved up)
(D) Selecting another anchor point
Drag to rotate the viewaround the black end
The black end snaps onthe center of the selectedview frame and the viewfollows
(A) Selecting the Stick (B) Selecting the black end and another view frame
S l h i i b li d 2 Select the positioning tool Icon
Moving views on a sheet with the Positioning Tool
1
-
8/11/2019 Generative Drafting (ANSI)
67/148
Copyright DASSAULT SYSTEMES 2002 67
Select the view or views to be aligned 2 Select the positioning tool Icon1
3 Select the desired positioning option(Vertical Distribute)
4 The views will move accordingly (alignedvertically at an evenly distributed distance)
The positioning tool can be position both views and text. Theycan be aligned from an element, Spaced vertically orhorizontally, distributed or even moved a specific distance
-
8/11/2019 Generative Drafting (ANSI)
68/148
-
8/11/2019 Generative Drafting (ANSI)
69/148
Deleting Views
2Views can be selected from the specification tree or fromthe geometry on the drawing.
-
8/11/2019 Generative Drafting (ANSI)
70/148
Copyright DASSAULT SYSTEMES 2002 70
They can be deleted with the following options:
1) Edit + Delete to delete the selected views
2) Contextual Menu Delete option
3) Using the Delete key on the keyboard to deletethe selected views
1
More than one view can be deleted by Multi-selecting from the tree or the geometry.
Isolation of a Generative View
Generated Views can be isolated from the 3D geometry and therefore no longer beassociative to the parent geometry.
-
8/11/2019 Generative Drafting (ANSI)
71/148
Copyright DASSAULT SYSTEMES 2002 71
Select OK to acknowledge the warningsome d res sup e l emen t s m ay bedeleted and to accept the Isolation.
21
Only dimensions thathave been generatedfrom the 3D constraintswill remain after theview has been isolated.
Once a view is Isolated thelink to the 3D data can neverbe reestablished.
Select Isolate option with theContextual Menu
Duplicating elements in a Generative ViewDuplicate interactive elements can be created over the generative elements
-
8/11/2019 Generative Drafting (ANSI)
72/148
Copyright DASSAULT SYSTEMES 2002 72
1
The Generative elements that lie underneath the interactiveelements will be the only elements effected by the 3Dgeometry changes.
3Activate the Viewcontaining the elementsto duplicate
2 Within the active view, select theelements to be duplicated
Select the contextual menuDuplicate Geometry
Note: The selected geometry is duplicated on theview at the same position. It is highlighted aftercreation
Product Part Filtering in Views (1/3)
Parts within a product c an be set to not be sect ioned when generat ing views
h h bl kb h l h d f
-
8/11/2019 Generative Drafting (ANSI)
73/148
Copyright DASSAULT SYSTEMES 2002 73
Part not cut incontext of assembly
Within the Assembly Design Workbench, select the part to define
2
1
Select the Mechanical tab and activate the DoNot cut in section views option
From the contextual menu, select Properties
3
4Create the section or breakout view or updatean existing view
Product Part Filtering in Views (2/3)
Par t s wi th in a product can be se t to no t be used when pro jec t ing v iews
Withi th A bl D i W kb h l t th t t d fi
-
8/11/2019 Generative Drafting (ANSI)
74/148
Copyright DASSAULT SYSTEMES 2002 74
Part not used incontext of assembly
Within the Assembly Design Workbench, select the part to define
2
1
Select the Mechanical tab and activate the DoNot use when projecting option
From the contextual menu, select Properties
3
4Create the section or breakout view or updatean existing view
Product Part Filtering in Views (3/3)Parts within a produ ct can be set to be represented with hid den l ines in views
Within the Assembly Design Workbench select the part to define
-
8/11/2019 Generative Drafting (ANSI)
75/148
Copyright DASSAULT SYSTEMES 2002 75
Part represented with hiddenlines in context of assembly
Within the Assembly Design Workbench, select the part to define
2
1
Select the Mechanical tab and activate theRepresented with hidden lines option
From the contextual menu, select Properties
3
4Create the section or breakout view or updatean existing view
-
8/11/2019 Generative Drafting (ANSI)
76/148
You w i l l learn how to m odify th e geom etr ica l proper t ies of the def in i t ionpro fi leofSection Detai landAux il iaryviews
Modifying of Section, Detail, Auxiliary Views
-
8/11/2019 Generative Drafting (ANSI)
77/148
Copyright DASSAULT SYSTEMES 2002 77
pro fi le of Sect ion , Detai l and Aux il iary views ..
The design of yo ur parts or produ cts w il l evolve with t ime. CATIA al lows you to m odify thearrangement o f views, and to mod ify the sect ion, detai l and auxil iary views to clar ify yourdrawings.
Why change the Profile?
-
8/11/2019 Generative Drafting (ANSI)
78/148
Copyright DASSAULT SYSTEMES 2002 78
g
Original part
Original associated drawing
New version of the part
Updated drawing, section view modified
Modifying Section View Profile (1/3)
-
8/11/2019 Generative Drafting (ANSI)
79/148
Copyright DASSAULT SYSTEMES 2002 79
Double click on the Section view callout toopen the Edit/Replace toolbar whichallows you to perform several kinds of
modifications.
1 Move the section profile : select the callout. Drag and drop at anew location.
2a
Select on the End Profile Edition icon to apply the modifications.3
Modifying Section View Profile (2/3 )
-
8/11/2019 Generative Drafting (ANSI)
80/148
Copyright DASSAULT SYSTEMES 2002 80
Double click on the Section view callout toopen the Edit/Replace toolbar whichallows you to perform several kinds ofmodifications.
1 2b Inverse the view direction : select the InvertProfile direction icon.
Select on the End Profile Edition icon to apply the modifications.3
2c1 Replace the profile : select the Replace Profile icon. Createyour new profile to replace the old one
Double click on the Section view callout to
Modifying Section View Profile (3/3)
-
8/11/2019 Generative Drafting (ANSI)
81/148
Copyright DASSAULT SYSTEMES 2002 81
your new profile to replace the old one.open the Edit/Replace toolbar whichallows you to perform several kinds ofmodifications.
Select on the End Profile Edition icon to apply themodifications.
3
2Double click on the Detail viewcallout to open the Edit/Replace
1 (a) Move the Detail profile : select the callout. Drag and drop it at thedesired location
Modify Detail View Profile
-
8/11/2019 Generative Drafting (ANSI)
82/148
Copyright DASSAULT SYSTEMES 2002 82
callout to open the Edit/Replace toolbar which allows you to performseveral kinds of modifications.
desired location.
(b) Replace the Detail view : select the Replace Profile icon. Createyour new detail callout profile.
2a 2b
Select on the End Profile Edition icon to applythe modifications.
3
2Double click on the Auxiliary viewcallout to open the Edit/Replace
1 (a) Move the Auxiliary view profile : select the callout. Drag it to a newlocation.
Modifying Auxiliary View Profile
-
8/11/2019 Generative Drafting (ANSI)
83/148
Copyright DASSAULT SYSTEMES 2002 83
toolbar which allows you to performseveral kinds of modifications. (b) Inverse the view direction : select the Invert Profile direction icon.
2a
2b
Select on the End Profile Edition icon to applythe modifications.
3
You wi l l learn h ow to m odify the graphic a l at t r ibutes of th e ca l lout fo r Sect ion , Detai l
Modifying Section, Detail, Auxiliary graphicaldefinition.
-
8/11/2019 Generative Drafting (ANSI)
84/148
Copyright DASSAULT SYSTEMES 2002 84
and Aux i l iary v iews .
According to your or your customers needs, CATIA allows you to modify the graphical attributesof Sect ion, Detai l or Aux il iary views. This allows you to c lar ify your drawin gs o r to adapt them todifferent s tandards.
Why Change the Graphical Definition ?
-
8/11/2019 Generative Drafting (ANSI)
85/148
Copyright DASSAULT SYSTEMES 2002 85
Original associated drawing Modified associated drawing
2Select (or multi-select) the Section viewcallout to modify Properties with thecontextual menu.
1Select the Callout tab. Use the differentcommands to customize the drawing.
Switches for predefined types of lines
Modifying Section View Graphical Definition
-
8/11/2019 Generative Drafting (ANSI)
86/148
Copyright DASSAULT SYSTEMES 2002 86
Preview
Customize the line,the extremities andthe anchor point
Customize thearrows
Once you have perform themodifications click on OK tovalidate.
2Select (or multi-select) the Detail view callout tomodify and Properties with the contextual menu.
1
Switches for predefined types of profiles
Select the Callout tab. Use the differentcommands to customize the drawing.
Modifying Detail View Graphical Definition
-
8/11/2019 Generative Drafting (ANSI)
87/148
Copyright DASSAULT SYSTEMES 2002 87
PreviewCustomize thearrows
Once you have perform themodifications click on OK tovalidate.
Customize the linetype and thickness
21 Select (or multi-select) the Auxiliary viewcallout to modify and Properties with thecontextual menu.
Select the Callout tab. Use the differentcommands to customize the drawing.
S i h f d fi d f fil
Modifying Auxiliary View Graphical Definition
-
8/11/2019 Generative Drafting (ANSI)
88/148
Copyright DASSAULT SYSTEMES 2002 88
Preview
Once you have perform themodifications click on OK tovalidate.
Switches for predefined types of profiles
Customize thearrows
You w i l l learn ho w to Mod ifying a sec t ion Hatching Representa t ion
Modifying a Section Hatching Representation
-
8/11/2019 Generative Drafting (ANSI)
89/148
Copyright DASSAULT SYSTEMES 2002 89
Hatching Patterns are changed to modify the default material that was assigned tothe 3D part or to accommodate the size of the part or the size of the view.
Why Change Hatching Pattern?
-
8/11/2019 Generative Drafting (ANSI)
90/148
Copyright DASSAULT SYSTEMES 2002 90
To change the steel crosshatching to an aluminumpattern.
1
Changing Hatching Pattern (1/2)
-
8/11/2019 Generative Drafting (ANSI)
91/148
Copyright DASSAULT SYSTEMES 2002 91
Select the hatching patternto modify. Select the
properties using the rightmouse button.
2
Activate the Pattern table(see next page)
3
-
8/11/2019 Generative Drafting (ANSI)
92/148
To Sum Up
In this lesson you have seen
-
8/11/2019 Generative Drafting (ANSI)
93/148
Copyright DASSAULT SYSTEMES 2002 93
How to Edit properties for a view, sheet and drawing
How to add sheets to a drawing
How to manage views
How to modify Section, Detail and Auxiliary view profiles
How to duplicate generative geometry
How to modify Section, Detail and Auxiliary views graphical definition
How to modify section hatching
Automatic Dimension GenerationYou w i l l c rea te the automat ic d im ension s and bal loon s for a generat ive drawing
-
8/11/2019 Generative Drafting (ANSI)
94/148
Copyright DASSAULT SYSTEMES 2002 94
What are Generated Dimensions ?Generated dimension are dimensions that are created from existing 3D Part constraints
Sketcher constraints
-
8/11/2019 Generative Drafting (ANSI)
95/148
Copyright DASSAULT SYSTEMES 2002 95
Pad Definition constraints
The dimensions that are generated from the 3D part aredetermined from the filter settings in the drafting options.
Generated Dimensions ...
Ways to Generate Dimensions
Dimensions can be generated with two different methods
-
8/11/2019 Generative Drafting (ANSI)
96/148
Copyright DASSAULT SYSTEMES 2002 96
1- In One Step
2- Step by stepFor each one you need to set up options
1
2
Dimension Generat ion optio ns are set on the Generat ion Tab within t he draft ingopt ions .
One Step Dimensioning Options
-
8/11/2019 Generative Drafting (ANSI)
97/148
Copyright DASSAULT SYSTEMES 2002 97
Dimension Generation filter option allows you to choose what type of 3Dconstraints will be included in the generation of dimensions. It isrecommended to have this setting on to assure desired dimensions aregenerated.
The allow automatic transfer between views only applieswhen using the step by step method.
The analysis after generation provides valuable information on theconstraints found and the constraints generated.
The Filter before generation option allows the selection ofdesired views for the dimensions to be generated into.
The step by step opt ion s al low you to c ontrol the generat ion and mo dify thedimens ions one by o ne as the are visual ized.
Step by Step Dimensioning Options
-
8/11/2019 Generative Drafting (ANSI)
98/148
Copyright DASSAULT SYSTEMES 2002 98
Pause
Transfer dimension to another view
If the TIMEOUT option is not selected the Next arrow mustbe selected for each dimension to be generated.
Next dimension generation
Number of dimensions generated
Trash
Seconds between dimension generation
Abort the dimension generation process
Visualization of dimensions tobe generated in 3D
Up to End option stops the step bystep method and generates theremaining dimensions in one step.
Select the views that are to receive the dimensionsand set the filter option to generate all dimensionsand OK
2
Select the one step dimensiongeneration icon
1
Dimensioning Generation in One Step
-
8/11/2019 Generative Drafting (ANSI)
99/148
Copyright DASSAULT SYSTEMES 2002 99
Select options from the analysis panel 3
Dimensions are generated in the selected views. If none of the viewsare selected the dimensions will generate is the most appropriate viewsuch that they will not have to be dimensioned anywhere else.
4
Constraints can be recovered by selectingthe Excluded constraints Icon and theconstraint to be recover from 3D geometry.
Often when Dim ensions are generated in one s tep they require reposi t ion ing. Theautomatic pos i t ioning o ption does this op erat ion in one s tep.
Select the Dimension Positioning2
Automatic Positioning of Generated Dimensions
-
8/11/2019 Generative Drafting (ANSI)
100/148
Copyright DASSAULT SYSTEMES 2002 100
Dimensions are rearrange automatically3
Select the view or views that require
the dimensions be repositioned
1 Icon or Tools + Positioning
Select the step by step dimensiongeneration icon and set the filteroption to generate all Dimension.
1Select the NEXT icon to start the generation process with a 5second delay between each dimension generated.
2Dimensioning Generation Step by Step
-
8/11/2019 Generative Drafting (ANSI)
101/148
Copyright DASSAULT SYSTEMES 2002 101
Select the frame of the view that the dimensionis to be transferred to
4
Select the pause and the transferoption to relocate a dimension toanother view
3
Pause
Transfer
Continue the generation process byselecting NEXT icon again.
5
The Pause can also be used to relocatedimensions during the generation process.
Select the trash icon to discard anyunwanted dimensions.
6
Finish the dimension generation byselecting the up to end Icon and thedesired analysis options. 7
Dimension Interference can be analyzed if the dimensionshave been Generated from 3D or Manually created.
The analyze panel provides the following:
(A) I t f i Di i li t
Dimension Interference Analysis
-
8/11/2019 Generative Drafting (ANSI)
102/148
Copyright DASSAULT SYSTEMES 2002 102
(A) Interfering Dimension list:The interfering dimensions can be viewed as a whole list or a filtered to display anoptimized list
(B) Total number of elements in the current list:As Dimensions are relocated the update switch will correct the total number of
dimensions that are poorly placed
(C) Number of the pointed element:
Each dimension that has an interference is assigned a number and this fielddisplays the number of the elements currently pointed at as an interfering element
(D) Scanner (Start, Before, Update, Next, End)To navigate among the list of interfering elements
B
C
D
A
Select Dimension Analysis Icon or the Tools + Analyze2Make the view active that isto be analyzed
1
Analyzing the Interference of Dimensions (1/2)
-
8/11/2019 Generative Drafting (ANSI)
103/148
Copyright DASSAULT SYSTEMES 2002 103
The interfering dimensions are automatically displayed in the redorange color.
Select the Next arrow to begin scanning theInterfering dimensions
3
4
Small circles allow visualizing theinterference location
5Move the Dimension such that it no longer interferes withany element and select the update Icon
6
Analyzing the Interference of Dimensions (2/2)
-
8/11/2019 Generative Drafting (ANSI)
104/148
Copyright DASSAULT SYSTEMES 2002 104
Continue the process until the dimensioninterference is reduced to zero and OK toclose the panel
7
Creates balloon annotations from the CATProduct information on an assembly
1 Activate the desired view andSelect the Balloon Icon
Balloons
-
8/11/2019 Generative Drafting (ANSI)
105/148
Copyright DASSAULT SYSTEMES 2002 105
Example results: Arrange the balloons asneeded after creation. Youcan also change the Fontproperties of the balloons asneeded.
To change the instance number, activate theCATProduct properties of the desired part andmodify the instance number.
If one parent element of the dimension is deleted or deactivated, as soon as you update the drawing(either 3D Generative or 2D Interactive drawing), the orphan dimension becomes purple on thecondition you activated the Analysis Display Mode
Dimension Associativity
-
8/11/2019 Generative Drafting (ANSI)
106/148
Copyright DASSAULT SYSTEMES 2002 106
Update ( )the drawing inaccordance with the 3D, any nonassociative dimension willdisappear.
Colors can be customized using the Analysis DisplayMode option from the Tools toolbar or via Tools-+Options (Drafting option to the left of the dialog box,Dimension tab).
To Sum Up
-
8/11/2019 Generative Drafting (ANSI)
107/148
Copyright DASSAULT SYSTEMES 2002 107
In this lesson you have seen
How to create the automatic dimensions for a generative drawing
How to create the automatic dimensions for a generative drawingusing step by step
How to create the automatic balloon annotations for a generative drawing
In th is lesson y ou w i l l see how to upd ate a drawing upo n no t i f icat ionthat the par t geom etry has changed in 3D. You w i l l a lso s ee how to adda Ti t le Bloc k and pr in t y our d rawing.
Finalizing the Drawing and Printing
-
8/11/2019 Generative Drafting (ANSI)
108/148
Copyright DASSAULT SYSTEMES 2002 108
Checking Links to Solid 3D Part and Updating a DrawingAdding a Title BlockAdding a BOM (Bill of Material)Printing the drawing
You w i l l learn how to check the drawing for 3D changes in the Par tChecking for Changes
-
8/11/2019 Generative Drafting (ANSI)
109/148
Copyright DASSAULT SYSTEMES 2002 109
6040
Select the update icon to re-generate the view andmodify any dimensions
Watch out for the Update icon: i f i t is high l ighted, i t means that the drawing needs tobe updated to ref lect the c hanges that w ere made on the 3D part i t represents
1
Matching Drawing with Modified 3D Part
-
8/11/2019 Generative Drafting (ANSI)
110/148
Copyright DASSAULT SYSTEMES 2002 110
If the part is not in the Part Design workbench, you can useEdit + Links to check if both representations match. 6040
The red circle in the tree indicates that the 3D part is not loaded
Checking Links to 3D Parts
Select the Edi t + Links menu 1
2
To check if the d rawing is up to date, you may h ave to load the represented part(s) .
Select the desired view.
-
8/11/2019 Generative Drafting (ANSI)
111/148
Copyright DASSAULT SYSTEMES 2002 111
3
If the modified 3D part has another name (new version number for example), you can use the Find button tohave your drawing pointing to it. You will still have to update it afterwards.
4 Select the Open button to load the part automatically
Select the Pointed Documents tab when you do not know the name of the 3D part .
You w i l l learn how to add a t i t le b lock to th e drawingAdding a Title Block
-
8/11/2019 Generative Drafting (ANSI)
112/148
Copyright DASSAULT SYSTEMES 2002 112
Change to the sheetBackground with Edit +Background menu
1 2 Select Inser t + Drawing + Frame andTi t le Block menu, to set the 2 mainframes
Adding a Title Block (1/2)
-
8/11/2019 Generative Drafting (ANSI)
113/148
Copyright DASSAULT SYSTEMES 2002 113
Note the blue axis is on thesheet to indicate that you arein the background
-
8/11/2019 Generative Drafting (ANSI)
114/148
Select File + Page Setup menu1
Drawing size can be changed anytim e in the draft ing pro cess.
Select the new size format, the desired orientation,the sheets effected and OK.
2
Changing Drawing size
-
8/11/2019 Generative Drafting (ANSI)
115/148
Copyright DASSAULT SYSTEMES 2002 115
the sheets effected and OK.
While changing drawing size an option to insert aBackground view from another document is available.
You wi l l learn h ow to add a BOM (Bil l o f Material) to th edrawing
Adding a BOM (Bill of Material)
-
8/11/2019 Generative Drafting (ANSI)
116/148
Copyright DASSAULT SYSTEMES 2002 116
Adding a BOM (Bill of Material) (1/2)Change to the sheetBackground with Edit +Background menu
1
2
From the Assembly, Select the Product3
Select Inser t Bi l l ofMaterial icon
-
8/11/2019 Generative Drafting (ANSI)
117/148
Copyright DASSAULT SYSTEMES 2002 117
structure to which generate the BOM
Adding a BOM (Bill of Material) (2/2)
Select a location on the drawing toposition the BOM
4
-
8/11/2019 Generative Drafting (ANSI)
118/148
Copyright DASSAULT SYSTEMES 2002 118
Note: a BOM can be updated to reflect when a part is added ordeleted to the product structure
You w i l l learn how to Pr in t the drawingPrinting the Drawing
-
8/11/2019 Generative Drafting (ANSI)
119/148
Copyright DASSAULT SYSTEMES 2002 119
From the File menu,1. use Print to direct the drawing to the selected printer or plotter2. use Preview button to check what will be printed
Printing a Drawing
-
8/11/2019 Generative Drafting (ANSI)
120/148
Copyright DASSAULT SYSTEMES 2002 120
1 2
1) Printer : Select the printer or key in a file name to print to.
2) Position and Size : Define the position and size of the geometry on the page
3) Print Area : Define the area to print
4) Page Setup : Define the area to print
5) Print Options : Define the print options
Print User Interface
-
8/11/2019 Generative Drafting (ANSI)
121/148
Copyright DASSAULT SYSTEMES 2002 121
) p p p
1
2
3
4
5
Three opt ion s tabs are prov ided for custom izing the printed outputPrint Options
-
8/11/2019 Generative Drafting (ANSI)
122/148
Copyright DASSAULT SYSTEMES 2002 122
To Sum Up ...
In this lesson you have seen
-
8/11/2019 Generative Drafting (ANSI)
123/148
Copyright DASSAULT SYSTEMES 2002 123
How to Check Links to Solid 3D Part and Updating a Drawing
How to Add a Title Block
How to Print a drawing
You will learn how to set the sessions default drafting options Setting Drafting Options
-
8/11/2019 Generative Drafting (ANSI)
124/148
Copyright DASSAULT SYSTEMES 2002 124
There are primarily seven Drafting Option tabs that allow the user to customize thedrafting interface.
(1) General - Determine display of ruler, grid, background colors and Tree Display
(2) Layout - Determine display of View name, scale, frame and determines new sheetparameters settings
What are Drafting Options?
-
8/11/2019 Generative Drafting (ANSI)
125/148
Copyright DASSAULT SYSTEMES 2002 125
(3) Generation - Determines dimension and geometry generation(4) Geometry - Aides to create geometry such as display of center points, auto-detection for orientation, and constraint creation and display
(5) Dimension - Position, Line-up dimensions and Analysis display mode
(6) Manipulators Turns on/Off the manipulators for dimension creation ormodification
(7) Annotation Turns on/off the controls for annotations
12 3 4 5 6 7
Set the fo l lowing General opt ions :
1) Show Ruler : In the OFF position the ruler along the top and left side of the screen will not bedisplayed
2) Grid : With the Display turned ON and Snap to point turned ON. Adjust the Primary spacingand graduations to aid in dimension placement.
General Options (1/2)
-
8/11/2019 Generative Drafting (ANSI)
126/148
Copyright DASSAULT SYSTEMES 2002 126
Snap to Point and grid display can also becontrolled from the standard toolbars.
3) Allow distortions : Allow you to change the scale of H and V on the grid
1
2
Example with Ruler ON
Set the fol low ing General opt ions:
1) Rotation : Allows to set the View
General Options (2/2)
-
8/11/2019 Generative Drafting (ANSI)
127/148
Copyright DASSAULT SYSTEMES 2002 127
1
3
manipulator default rotationangle
2) Colors : Allows easy identificationof a Detail sheet by alteringthe background color
3) Tree : Allows parameters andrelations to be displayed inthe graph tree
4) View Axis : Provides a blue axis inthe view that is current
2
4
Set the fo l lowing v iew Layou t o p t ions :
1) View name : Check that it is OFF since primary and projected view names are not normally necessary
2) Scaling factor : Check that it is OFF since primary and projected view scale will be declared on the drawing as aglobal scale for the drawing
Layout Options
-
8/11/2019 Generative Drafting (ANSI)
128/148
Copyright DASSAULT SYSTEMES 2002 128
3) View frame : Turn on to easily understand which view is active and to quickly access view properties
4) Propagation of broken and breakout specifications : Allows the propagation a Broken or Break-out specificationduring the creation of a projection or auxiliary view
5) Auxiliary and/or section views orientation according to profile : Allow the view axis to be orientation according toprofile
6) New Sheet : Allows the selection to determine where the sheet properties will be copied from and an option to copythe background view
1
2
3
5
4
6
Set the fo l lowing v iew Genera t ion opt ions :
1
1) Geometry Generation : Allows the automaticcreation of axis, centerlines, threadrepresentation, fillet boundaries, hidden lines,3D colors inheritance, project 3D wireframe
Generation Options
-
8/11/2019 Generative Drafting (ANSI)
129/148
Copyright DASSAULT SYSTEMES 2002 129
2
Threads are generated in top views,side views and section views.
2) Dimension Generation : Allows dimensions to beautomatically positioned after generation, automatic
transfer between views and analysis of dimensionsthat have been generated
Time delay between dimension when using the stepby step method can also be set prior to starting thegeneration process.
and set the view linetype
-
8/11/2019 Generative Drafting (ANSI)
130/148
1) Manual positioning at creation: allowsfull freedom for dimension positioning.
2) End dimension creation at line-up : use ifline-up is the last step in the normaldimension creation process.
Before c rea t ing any d imens ions , t u rn on the fo l lowing Dimens ion op t ions :
1
2
Dimension Options
-
8/11/2019 Generative Drafting (ANSI)
131/148
Copyright DASSAULT SYSTEMES 2002 131
3) Create associativity dimensionline/geometry: the distance between thecreated dimension and the geometryremains the same as set by the value.
4) Associativity on 3D : a link can beapplied between a dimension and the 3Dpart. As a result, when you update the
drawing, the dimension is automaticallyre-computed. If you do not check thisoption, when you perform the update,you need to re-create the dimensionafterwards.
5) Line-Up default : a default spacingbetween dimensions when a Line-Upand a reference dimension are selected
6) Activate analysis display mode :Displays dimension status of Non up-to-date dimensions, Non associativedimensions, converted dimensions,Fake dimensions, Driving dimensionsand True dimensions
4
6
5
3
Dimension ManipulatorsOpt ion to enab le d imens ion m an ipu lato r s to c on t ro l the p rec i se locat ion o rp roper t i es du r ing c reat ion o r m odi f i ca tion o f d imens ions
-
8/11/2019 Generative Drafting (ANSI)
132/148
Copyright DASSAULT SYSTEMES 2002 132
1
2
3
4
5
6
7
1
2
3 4
5 6 7
1a
3a
4a
Annotation Options
Annotation Option forText, Leader Text, andGDT
Settings to choose theleader default behavior
St H i t l/V ti l
-
8/11/2019 Generative Drafting (ANSI)
133/148
Copyright DASSAULT SYSTEMES 2002 133
Stay Horizontal/Verticalwith leader creationFree orientation
Ability to Swap the text orGDT orientation during
creationWith the ctrl key, swapfrom vertical to horizontalWith the shift key, freeor lock perpendicular theleader
Drafting Page (Drawing) Settings
Menu Fi le + Page Setup Prop er t ies :
-
8/11/2019 Generative Drafting (ANSI)
134/148
Copyright DASSAULT SYSTEMES 2002 134
Drawing Sizeand Orientation
Format: on/off
DrawingStandard
To Sum Up
In this lesson you have seen
-
8/11/2019 Generative Drafting (ANSI)
135/148
Copyright DASSAULT SYSTEMES 2002 135
How to set drafting options using the Dimension,Display, General, Generation, Geometry, and Layouttabs
How to set the drafting page standards
You wil l learn how to take advantage of vis ual izat ion aids andmanage draft ing visual izat ion s t andardsDrafting Visualizations
-
8/11/2019 Generative Drafting (ANSI)
136/148
Copyright DASSAULT SYSTEMES 2002 136
Extraction of Bends in dashedlines for unfolded views
Setting Company Standards
What are the Different Types of Visualization Aids or Standards?
-
8/11/2019 Generative Drafting (ANSI)
137/148
Copyright DASSAULT SYSTEMES 2002 137
3D Viewer Thread Generation:
The Standards Fi le contro ls the representat ion of text and dim ensions. Usersor adminis trators can use this f i le to create or mo dify a preferred com panystyle.
Managing Company Standards
-
8/11/2019 Generative Drafting (ANSI)
138/148
Copyright DASSAULT SYSTEMES 2002 138
2 Set the thread definition by selecting ThreadDefinition menu
In Part Design Workbench, double-click on thethreaded hole
1
Creating Threaded Holes Representation (1/2)
-
8/11/2019 Generative Drafting (ANSI)
139/148
Copyright DASSAULT SYSTEMES 2002 139
3 Generate the views or update the existing views of thepart.
Creating Threaded Holes Representation (2/2)
-
8/11/2019 Generative Drafting (ANSI)
140/148
Copyright DASSAULT SYSTEMES 2002 140
Threaded HoleRepresentation
2 Move the cursor over a surfacein one of the views
Select Tools + Analyze and select ShowGeometry in all Viewpoints
1
The 3D Viewer enables visualization of the 3D elements surface oredge in the views that the element corresp onds w ith
Using the 3D Viewer
-
8/11/2019 Generative Drafting (ANSI)
141/148
Copyright DASSAULT SYSTEMES 2002 141
3 Note the image in the 3D viewerorients to this surface
The 3D viewer is only for previewing surfacesand is not available in select mode
-
8/11/2019 Generative Drafting (ANSI)
142/148
To Sum Up
In this lesson you have seen
-
8/11/2019 Generative Drafting (ANSI)
143/148
Copyright DASSAULT SYSTEMES 2002 143
How to set the Threaded hole representation
How to use the 3D viewer
How to update Persistency of generated geometry with Graphical Representation
In this lesson you have seen
You w i l l learn how to save an Drawing Docum entSaving a Drawing Document
-
8/11/2019 Generative Drafting (ANSI)
144/148
Copyright DASSAULT SYSTEMES 2002 144
There are various w ays to save a Drawing Docu ment
Save will save the active drawing documentf
Saving Drawing Documents
-
8/11/2019 Generative Drafting (ANSI)
145/148
Copyright DASSAULT SYSTEMES 2002 145
Save As... is similar to Save, but allows you to specifythe name and folder for the active document
Save All will propose saving all modified, opendocuments and children of these document, but youcan control which documents actually get saved
Save All As identifies the state of ALL opendocuments (new, modified, open but not modified),allows you to select which documents to save andallows you to specify the name and folder for thesedocuments
When a generated drawing is saved, the link between each view and the original 3D partis saved as well as Stored source.
To check the information stored , use the Edit + Links menu right after saving - this
might help prevent any surprises next time the document is opened:
Checking the Links to the 3D Part
-
8/11/2019 Generative Drafting (ANSI)
146/148
Copyright DASSAULT SYSTEMES 2002 146
To Sum Up
In this lesson you have seen
-
8/11/2019 Generative Drafting (ANSI)
147/148
Copyright DASSAULT SYSTEMES 2002 147
How to save a drawing
How to check the links of a saved drawing
Introduction to the Generative Drafting Workbench
How to start a generative drawing and view generation
To Sum Up
How to create any additional section, auxiliary, isometricor exploded views
In this course you have seen
-
8/11/2019 Generative Drafting (ANSI)
148/148
Copyright DASSAULT SYSTEMES 2002 148
or exploded views
How to edit a views layout and properties
How to finalize a drawing and print
How to set the drafting options
How to set the drafting visualizationsHow to save a drawing document and check the links
top related