geze sliding door systems versatile and ......control unit dcu1-nt dcu1-2m-nt with fault memory with...
Post on 06-Sep-2020
5 Views
Preview:
TRANSCRIPT
GEZE SLIDING DOOR SYSTEMSVERSATILE AND COMFORTABLE
G E Z E AU TO M AT I C D O O R S YS T E M S
BE WEGUNG MIT SYSTEM
Cover photo: Tarık Kaan Muşlu, photo on page 2: GEZE GmbH
3Sliding door systems
Automatic sliding door systems
GEZE SLIDING DOOR SYSTEMS
TABLE OF CONTENTS
Overview table 4
Standard sliding door systems 5
GEZE ECdrive 7
GEZE Slimdrive SL NT 18
GEZE Powerdrive PL 28
Special versions of sliding door systems 37
GEZE Slimdrive SLT 38
GEZE Slimdrive SL RC2 47
GEZE Slimdrive SL-BO 52
GEZE Slimdrive SL-RD 54
GEZE Slimdrive SF 56
GEZE Slimdrive SL-T30 61
GEZE Slimdrive SLV 62
GEZE Slimdrive SL inclined 63
Special functions for escape and rescue routes
Redundant sliding doors for escape and rescue routes with locked shop closing function (FR-LL) 64
Redundant sliding doors for escape and rescue routes in both directions (FR-DUO) 65
Redundant sliding doors for locked escape and rescue routes (FR-RWS) 66
Sliding doors for escape and rescue routes according to CO48 (France) 67
Functions and solutions
Accessible toilet 68
Vestibule systems 69
Sliding door fittings 70
Accessories
Operating automatic sliding doors 72
Automatic activation 73
Manual activation 74
Electronic protection 75
Locking 76
Service tools 78
Cable diagram 79
References 80
4 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIDING DOOR SYSTEMS
ECdrive Slimdrive SL NT Powerdrive PL Page
Product features
Dimensions (height x depth)120 x 175 mm 150 x 175 mm
70 x 190 mm150 x 185 mm 200 x 185 mm
Opening width 1-leaf 700 - 3000 mm 700 - 3000 mm 700 - 3000 mm
Opening width 2-leaf 900 - 3000 mm 900 - 3000 mm 800 - 3000 mm
Leaf weight (max.) 1-leaf 120 kg 125 kg 2001 kg
Leaf weight (max.) 2-leaf 2 x 120 kg 2 x 125 kg2 x 1801 kg 2 x 2002 kg
Opening / closing speed (max.) 0.8 / 0.8 m/s 0.8 / 0.8 m/s 0.8 / 0.8 m/s
Redundant sliding doors for escape and rescue roues (FR) ● ● ● 6
Special functions for escape and rescue routes
FR with locked shop closing (FR-LL) ● ● ● 64
FR in both directions (FR-DUO) ● ● ● 65
FR locked (FR-RWS) ● ● ● 66
CO48 (France) ● ● ● 67
Fittings
ISO glass fine-framed ● ● ●
MONO glass fine-framed ● ● ●
ESG clamping profile fine-framed ● ●
All-glass system (GGS) ●
Integrated all-glass system (IGG) ●
On-site leaves ● ● ●
Page 7 18 28
● = Yes 1 = max. 160 kg for FR version, max. 120 kg for fine-framed leaves 2 = increased opening and hold-open times if nec.
Overview table for automatic sliding door systems
5Sliding door systems
Automatic sliding door systems
STANDARD SLIDING DOOR SYSTEMS
Standard sliding door systems
For comfort and perfection
Sliding doors are space-saving, elegant and modern. Glass sliding doors are ideal when it comes to making good use of daylight and fulfilling optical criteria. GEZE automatic sliding doors can be used to realise various user scenarios in one building.
• The variants of the Slimdrive series with an overall height of only seven centimetres blend perfectly into any building‘s architecture and offer a wide range of application possibilities.
• ECdrive drives are economical and extremely reliable in their functionality.
• Powerdrive drives are real power packages and capable of moving heavy doors conveniently and safely.
Augustinum, Stuttgart, Germany (photo: Dirk Wilhelmy)
Area of application • Public buildings and authorities • Businesses and car dealerships • Shopping centres and retail • Airports and railway stations • Health and care sector, e.g. hospitals, pharmacies • Hotels and gastronomy • Banks and education institutes e.g. schools, universities • Industrial buildings • Vestibule systems
DIN 18650 The industrial standard DIN 18650 was created to guarantee operators and users of automatic doors optimum safety. GEZE sliding door systems have been type-tested and certified in accordance with DIN 18650.
EN 16005The new European standard EN 16005 sets out the design requirements and testing methods used to ensure the safe use of automatic doors. The new standard has created a Europe-wide safety standard for automatic doors. All automatic door systems and safety sensors from GEZE meet the EN 16005 standard and are available.
6 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
STANDARD SLIDING DOOR SYTEMS
Redundant sliding doors for escape and rescue routes (FR)To guarantee the safety of escape and rescue routes, the control unit is designed in a redundant way in connection with the complete system. This redundancy guarantees that in the event of a power failure or fault, the sliding door will open automatically and safely in the „Automatic“ and „Shop closing“ modes of operation. In „Night“ mode of operation the locking prevents unauthorised opening of the door. There is no escape and rescue route function in this mode of operation.
Kolbenschmidt Pierburg, Neckarsulm, Germany (photo: Nikolaus Grünwald)
1
2
45
5
6 78
910
11
12
12
3
Design possibilities with the sliding door system
1 = Sliding door drive2 = Moving leaf3 = Side panel4 = Combined detector5 = Active infrared detector6 = Programme switch with key switch
7 = Plastic elbow switch8 = Glass LED sensor button9 = Proximity switch10 = Elbow switch11 = Foot contact switch12 = Light barriers
7Sliding door systems
Automatic sliding door systems
GEZE ECdrive
GEZE ECdrive
Drive system for linear sliding doors in high traffic areas
The linear sliding door system GEZE ECdrive offers numerous convincing benefits at an excellent cost/performance ratio. The drive is suitable for doors in high traffic areas. The ECdrive covers door leaf weights of up to 120 kg and is uncompromisingly reliable. High-quality materials and the latest control technology guarantee high efficiency. Servicing costs are considerably reduced thanks to the self-cleaning roller carriage. The rounded cover in the elegant GEZE design gives the system an attractive appearance.
Technical data
Product features ECdrive ECdrive FRFor 1-leaf door systems ● ●For 2-leaf door systems ● ●Height 120 / 150 mmDepth 175 mmLeaf weight (max.) 1-leaf 120 kgLeaf weight (max.) 2-leaf 120 kgOpening width 1-leaf 700 – 3000 mmOpening width 2-leaf 900 – 3000 mmTemperature range -15 – 50 °CIP rating IP20Disconnection from mains Main switch in the driveOpening speed (max.) 0.8 m/sClosing speed (max.) 0.8 m/sHold-open time 0 – 60 SAdjustable opening and closing force (max.) 150 NAutomatic adaptation to traffic flow ● ●Automatic reversal when an obstacle is detected ● ●Pharmacy opening ● ●Interlocking door system function ● -Vestibule function ● -Automatic opening in the event of a power failure adjustable standardAutomatic closing in the event of a power failure adjustable not availableFunction in the event of a power failure adjustable for 30 min. / 30 cycles openAutomatic opening in the event of a fault not available standardApprovals DIN 18650
EN 16005DIN EN ISO 13849: Performance
Level D
DIN 18650EN 16005
DIN EN ISO 13849: Performance Level D
AutSchR● = YES- = NOT AVAILABLE
8 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE ECdrive
1 = Transformer2 = Locking3 = Roller carriage4 = Control unit5 = Rechargeable battery6 = Motor
Drive components
Technical data ECdrive ECdrive FRTransformer Ring core with fuse and main switchVoltage 230 VFrequency 50 – 60 HzCapacity rating 150 WLocking Toothed belt locking, electromagnetic, two-stageRoller carriage Door leaf adjustment vertical 10 mmDoor leaf adjustment horizontal 15 mmAnti-tilt protection standardSelf-cleaning ● ●Control unit DCU1-NT DCU1-2M-NTWith fault memory ● ●With memory for statistical data ● ●Software update possible ● ●Optional bus interface ● ●Connection for fire alarm system ● ●Power supply for peripherals ● ●Programmable inputs 3 pc.Programmable outputs 2 pc.Rechargeable battery NiCd, 24 V, 700 mAhMotor Gear motor Double gear motorTorque 400 Ncm● = YES
Fitting variations
Fittings ECdriveISO glass fine-framed ●MONO glass fine-framed ●ESG clamping profile ●All-glass system (GGS) -Integrated all-glass system (IGG) -Frame leaf (provided by customer) ●Wooden leaf (provided by customer) ●● = YES- = NOT AVAILABLE
12
3
45
6
9Sliding door systems
Automatic sliding door systems
GEZE ECdrive
Calculation of the drive length (AL) in mm*
ECdrive ECdrive-FR**Opening width (ÖW) Drive length (AL) Opening width (ÖW) Drive length (AL)
2-leaf 900 - 3000 2 x ÖW + 100 900 - 3000 2 x ÖW + 1001-leaf 700 - 3000 2 x ÖW + 60 700 - 3000 2 x ÖW + 60* Minimum overall length of the complete system with ISO glass profile system** For FR versions (FR-RWS, FR-LL).
Note:Opening widths of escape route sliding doors < 1000 mm are only permitted in exceptional cases.A continuous floor guide is recommended for external systems from an opening width of 2000 mm.The minimum opening widths depend on the requirements of building law.
Calculation of leaf and glass dimension in mm
ISO-glass with aluminium secondary closing edge
ISO-glass with rubber econdary closing edge
ESG
Leaf width 1-leaf ÖW + 40 ÖW + 35 ÖW + 352-leaf ÖW / 2 + 40 ÖW / 2 + 35 ÖW / 2 + 35
Leaf height with cover 120 mm DH + 25with cover 150 mm DH + 55
Glass width 1-leaf ÖW ÖW ÖW + 92-leaf ÖW / 2 ÖW / 2 ÖW / 2 + 9
Glass weight FH - 90 FH - 90 FH - 85Glass thickness 22 22 10, 12NSK = secondary closing edge
Note: max. leaf ratio width to height 1:4
AL
ÖW
GB
GH
DH
AL = Drive lengthDH = Passage heightGB = Glass widthGH = Glass heightÖW = Opening width
10 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE ECdrive
Girder section ECdrive ISO glass fitting
1-leaf
1500
2500
3500
DH
[mm
]
0 1000 2000
ÖW [mm]
2000
3000
DH = Passage heightÖW = Opening width
2-leaf
2500
3500
1000 2000 3000ÖW [mm]
2000
3000
DH
[mm
]A
B
A = External applicationB = Internal applicationDH = Passage heightÖW = Opening width
Profiles
Standard Girder section and track additionally suspen-ded from the ceiling
11Sliding door systems
Automatic sliding door systems
GEZE ECdrive
With ISO/MONO glass fitting – without side panelDrawing no. 70504-ep01
175
min
. 15
120
DH
607
3052
Floor guide: for floor mounting Floor guide: adjustable for wall assembly
min
. 15
150
175
DH
30
60
Floor guide: continuous
1-leaf door system
2-leaf door system
LD = Clear passageFW = Travel pathFB = Leaf widthÖW = Opening widthVRS = Drive extension rightDH = Passage height
LD = ÖW+12 VRS
FW = ÖW FB = ÖW+3535 30 40
12
60
LD = ÖW+2
35FB = ÖW/2+35 FB = ÖW/2+40
30 2 40
12 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE ECdrive
With ISO/MONO glass fitting – with side panelDrawing no. 70504-ep12
175 48
150
DH
89
Low girder section
175 48
120
DH
89
High girder section
LB
5 STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5 5
35 30
FW = ÖW/2 FB = ÖW/2+35 2
Installation: self-supporting installation
Note: see installation drawing for area of application
LB
STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-55 5
FW = ÖW/2
35 30
2FB = ÖW/2+35
Installation: wall assembly with longer drive and girder section between the walls
LB = Clear construction widthSTB = Side panel widthLD = Clear passageFW = Travel pathFB = Leaf widthÖW = Opening widthDH = Passage height
13Sliding door systems
Automatic sliding door systems
GEZE ECdrive
With ISO/MONO glass fitting – with protective leafDrawing no. 70504-ep11
175
min
. 15
150
DH
8
99
28
Protective leaf: drive installation
175
min
. 15
120
DH
8
99
34
Protective leaf: wall assembly
Protective leaf
With ISO/MONO glass fitting – with safety leafDrawing no. 70504-ep14
Note: see installation drawing for area of application
120
175
DH
Installation: On post-rail construction with safety leafDH = Passage height
23,5
min
. 38,
5
3720
Installation: On post-rail construction with safety leaf
78 67
14 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE ECdrive
LD = ÖW+4
35 30
4FB = ÖW/2+35
Toughened safety glass clamp fitting – without side panelDrawing no. 70506-ep03
min
. 15
175
120
DH
773
1839
Floor guide: for floor mounting
175
min
. 15
150
DH
Floor guide: adjustable for wall assembly
1-leaf door system
2-leaf door system
LD = Clear passageFW = Travel pathFB = Leaf widthÖW = Opening widthVRS = Drive extension rightDH = Passage height
LD = ÖW+6 VRS
FW = ÖW
35
FB = ÖW+35 6
4030
60
15Sliding door systems
Automatic sliding door systems
GEZE ECdrive
Toughened safety glass clamp fitting – with side panelDrawing no. 70504-ep13
175 48
150
DH
64
Version with 120 mm cover
175 48
120
DH
64
Version with 150 mm cover
Installation: self-supporting installation
Installation: wall assembly with longer drive and girder section between the walls
LB = Clear construction widthSTB = Side panel widthLD = Clear passageFW = Travel pathFB = Leaf widthÖW = Opening widthDH = Passage height
Note: see installation drawing for area of application
LB
5 5STB = (LB-ÖW)/2-5 LD = ÖW+4 STB = (LB-ÖW)/2-5
FW = ÖW/2
35 30
FB = ÖW/2+35 4
LB
STB = (LB-ÖW)/2-5 LD = ÖW+4 STB = (LB-ÖW)/2-5
FW = ÖW/235 30
4FB = ÖW/2+35
5 5
16 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE ECdrive
With on-site wooden leafDrawing no. 70504-ep09
175
DH
120
7
Version with 120 mm cover and floor guide for floor mounting
DH
150
7
30
175
60 23
Version with 150 mm cover and continuous floor guide
1-leaf door system
2-leaf door system
D = ProjectionFB = Leaf widthFW = Travel pathÖW = Opening widthDH = Passage height
ÖWD
FB = ÖW + D - 8FW = ÖW 8 50
75
ÖW
2FB = ÖW/2 + D
DFW = ÖW/2
17Sliding door systems
Automatic sliding door systems
GEZE ECdrive
ECdrive, Akbati, Istanbul, Turkey (photo: Tarık Kaan Muşlu)
18 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
GEZE Slimdrive SL NT
Drive system for automatic linear sliding doors using the latest technology
Façades with slim post-rail structures seem even lighter and more inviting if they discreetly and easily blend in with the building architecture. The new GEZE Slimdrive SL NT automatic sliding door system is ideal – particularly in glass façades where large door leaves have to be moved and all components have to appear slim and delicate.
With its low drive height of only 7 cm, the Slimdrive SL NT can be integrated almost invisibly in the façade and moves door leaf weights of up to 125 kg. The new track makes mounting directly on the wall, façade or on girder sections easier. Standard self-cleaning roller carriages guarantee smooth running and increase the roller carriage service life. Additional supporting rollers increase steadiness.
Technical data
Product features SL NT SL NT-FRFor 1-leaf door systems ● ●For 2-leaf door systems ● ●Height 70 mmDepth 190 mmLeaf weight (max.) 1-leaf 125 kgLeaf weight (max.) 2-leaf 125 kgOpening width 1-leaf 700 – 3000 mmOpening width 2-leaf 900 – 3000 mmTemperature range -15 – 50 °CIP rating IP20Disconnection from mains Main switch in the driveOpening speed (max.) 0.8 m/sClosing speed (max.) 0.8 m/sHold-open time 0 – 60 SAdjustable opening and closing force (max.) 150 NAutomatic adaptation to traffic flow ● ●Automatic reversal when an obstacle is detected ● ●Pharmacy opening ● ●Interlocking door system function ● -Vestibule function ● -Automatic opening in the event of a power failure adjustable standardAutomatic closing in the event of a power failure adjustable not availableFunction in the event of a power failure adjustable for 30 min. / 30 cycles openAutomatic opening in the event of a fault not available standardApprovals DIN 18650, EN 16005,
DIN EN ISO 13849: Performance Level D
DIN 18650, EN 16005DIN EN ISO 13849:
Performance Level D, AutSchR● = YES- = NOT AVAILABLE
19Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
Drive components
Technical data SL NT SL NT-FRTransformer Ring core with fuse and main switchVoltage 230 VFrequency 50 – 60 HzCapacity rating 150 WLocking Toothed belt locking, electromagnetic, two-stageRoller carriage Door leaf adjustment vertical 10 mmDoor leaf adjustment horizontal 6 mmAnti-tilt protection standardSelf-cleaning ● ●Control unit DCU1-NT DCU1-2M-NTWith fault memory ● ●With memory for statistical data ● ●Software update possible ● ●Optional bus interface ● ●Connection for fire alarm system ● ●Power supply for peripherals ● ●Programmable inputs 3 pc.Programmable outputs 2 pc.Rechargeable battery NiCd, 24 V, 700 mAhMotor Gear motor Double gear motorTorque 400 Ncm● = YES
1 = Transformer2 = Locking3 = Roller carriage4 = Control unit5 = Rechargeable battery6 = Motor
12
3
45
6
Fittings Slimdrive SL NTISO glass fine-framed ●MONO glass fine-framed ●ESG clamping profile -All-glass system (GGS) ●Integrated all-glass system (IGG) ●Frame leaf (provided by customer) ●Wooden leaf (provided by customer) ●● = YES- = NOT AVAILABLE
Fitting versions
20 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
Calculation of the drive length AL in mm*
Slimdrive SL NT Slimdrive SL NT-FR**Opening width (ÖW) Drive length (AL) Opening width (ÖW) Drive length (AL)
2-leaf900 - 1000 ÖW + 1100 900 - 1070 ÖW + 11701000 - 3000 2 x ÖW + 100 1070 - 3000 2 x ÖW + 100
1-leaf, left hand slide to open 700 - 3000 2 x ÖW + 60
700 - 800 ÖW + 860800 - 3000 2 x ÖW + 60
1-leaf, left hand slide to open 700 - 3000 2 x ÖW + 60
700 - 800 ÖW + 860800 - 3000 2 x ÖW + 60
When using Lock A, the drive length increases by 100 mm.When using Lock M on 1-leaf doors, the drive length increases by 100 mm. When using Lock M on 2-leaf doors, the drive length increases by 100 mm only if an optional bar message is installed.
* Minimum overall lenght of the complete system with ISO glass profil system** Request drawing for the FR-RWS, FR-LL variations!
Note:Opening widths of escape route sliding doors < 1000 mm are only permitted in exceptional cases.A continuous floor guide is recommended for external systems from an opening width of 2000 mm.The minimum opening widths depend on the requirements of building law.
Caculation of leaf and glass dimensions in mm (ISO glass profile system)
ISO glassLeaf width 1-leaf ÖW + 35
2-leaf ÖW / 2 + 35Leaf hight 1-leaf / 2-leaf FH = DH - 2Glass width 1-leaf ÖW
2-leaf OW / 2Glass height 1-leaf / 2-leaf FH - 90Glass thickness 22
Note: max. leaf ratio width to height 1:4
AL
ÖW
GB
GH
DH
AL = Drive lengthDH = Passage heightGB = Glass widthGH = Glass heightÖW = Opening width
21Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
With girder section, ISO glass fitting
1-leaf
3000
2000
ÖW [mm]
200010000
DH
[mm
]
3500
2500
1500
DH = Passage heightÖW = Opening width
2-leaf
DH
[mm
]
3000
2000
ÖW [mm]
300020001000
3500
2500
AB
A = External applicationB = Internal applicationDH = Passage heightÖW = Opening width
Profiles
Profile standard girder section SL NT Additional space EC/SL girder section Profile for carrier and track additionally sus-pended from the ceiling
22 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
With ISO/MONO glass fitting – without side panelDrawing no. 70511-ep01
7
193
70m
in. 1
5
60
DH
3051
Floor guide: for floor mounting Floor guide: adjustable for wall assembly
30
60
Floor guide: continuous
1-leaf door system
2-leaf door system
LD = Clear passageFW = Travel pathFB = Leaf widthÖW = Opening widthVRS = Drive extension rightDH = Passage height
LD = ÖW+12 VRS
FW = ÖW FB = ÖW+35
35 30 4012
60
LD = ÖW+2
35 30
2FB = ÖW/2+35
23Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
With ISO/MONO glass fitting – with side panelDrawing no. 70511-ep02 + 70511-ep04
190 44
70D
H
82
Low girder section
48
190
70D
H
140
82
High girder section
Note: see installation drawing for area of application
LB
STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-55 5
35 302FW = ÖW/2 FB = ÖW/2+35
Installation: self-supporting installation
LB
STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5 55
FW = ÖW/2 FB = ÖW/2+3535 30
2
Installation: wall assembly with longer drive and girder section between the walls
25 LBSTB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5
25
30 FW = ÖW/235 30
FB = ÖW/2+35 2
Installation: wall assembly
LB = Clear construction widthSTB = Side panel widthLD = Clear passageFW = Travel path
FB = Leaf widthÖW = Opening widthDH = Passage height
24 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
With protective leafDrawing no. 70511-ep07
193
min
. 15
70D
H
8
98
22
Protective leaf: drive installationDH = Passage height
78 67
Protective leaf
With safety leafDrawing no. 70511-ep03
Note: see installation drawing for area of application
70
193
DH
Installation: on post-rail construction with safety leaf
37 20 23,5
min
. 38,
5
Installation: on post-rail construction with safety leafDH = Passage height
25Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
With all-glass system (GGS) – with and without side panelDrawing no. 70511-ep06
Door leaf Door leaves and side panels
2-leaf door system with door leaf
2-leaf door system with door leaf and side panels
AL = Drive lengthFW = Travel pathFB = Leaf widthFH = Leaf heightSTB = Side panel width
STH = Side panel heightLB = Clear construction widthLD = Clear passageÖW = Opening widthDH = Passage height
70
4
8
(127)
33
DH
FH=D
H-4
(127)
n64
195
69
STH
= DH-
3
45
DH
70
FH =
DH-4
8
1618
12
30
n x 175n x 175
LB
LD = ÖW+2
FB = ÖW/2+30
2
=
=
175=
=
1756 18618
10
10/1
2
8
5 5AL
5
STB = (AL-ÖW)/2 -1
5
STB = (AL-ÖW)/2 -1
30
FW = ÖW/2c
30
FB = ÖW/2+30
55
c
LB
LD = ÖW+2
FW = ÖW/2
30
FB = ÖW/2+30
30
FB = ÖW/2+30
2
15 401540
AL
8
10
26 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
With integrated all-glass system (IGG) – with and without side panelsDrawing no. 70511-ep05
DH
70
193
min
. 15
20 7
3955
Floor guide: for floor mounting Floor guide: adjustable for wall assembly
193
min
. 15
70D
H
60
30
95
Floor guide: continuous
1-leaf door system
2-leaf door system
LD = Clear passageFW = Travel pathLB = Clear construction widthSTB = Side panel width
DH = Passage heightFB = Leaf widthÖW = Opening widthVRS = Drive extension right
LD = ÖW+7,5 VRS
60
407,5FB = ÖW+48
48FW = ÖW
LB
STB = LB-ÖW/2-10 LD = ÖW+9 STB = LB-ÖW/2-10
FW = ÖW/2 FB = ÖW/2+4848
9
27Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL NT
With on-site wooden leafDrawing no. 70511-ep08
7
70D
H
193
min
. 15
Installation variant for slimmer wooden leaves and floor guide for floor mounting
6030
Alternative variant with continuous floor guide
DH
70
8
Installation variant for thicker wooden leaves and floor guide for floor mounting
1-leaf door system
2-leaf door system
D = ProjectionFB = Leaf widthFW = Travel pathÖW = Opening widthLD = Clear passage clearanceDH = Passage height
D ÖW
FB = ÖW + D - 8FW = ÖW 8 40
60
LD = ÖW + 2
FW = ÖW/2 FB = ÖW/2 + D 2
D
28 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE POWERDRIVE PL
GEZE Powerdrive PL
Drive system for automatic linear sliding doors with large, heavy leaves
The trademarks of the Powerdrive series are convenience and safety even for heavy doors. Large entrances and opening widths combined with high leaves make special demands on door drive technology. And this is exactly where the strengths of the Powerdrive come into their own. Economic and powerful, this drive moves heavy door leaves up to 200 kg (in the escape route version up to 160 kg). Optimum running characteristics and low wear thanks to compatible profiling of the rollers and track allow use in areas with a high traffic flow.
Technical data
Product features PL PL-FRFor 1-leaf door systems ● ●For 2-leaf door systems ● ●Height 150 / 200 mmDepth 185 mmLeaf weight (max.) 1-leaf 200 kg 160 kgLeaf weight (max.) 2-leaf 200 kg 160 kgOpening width 1-leaf 700 – 3000 mmOpening width 2-leaf 800 – 3000 mmTemperature range -15 – 50 °CIP rating IP20Disconnection from mains Main switch in the driveOpening speed (max.) 0.8 m/sClosing speed (max.) 0.8 m/sHold-open time 0 – 60 SAdjustable opening and closing force (max.) 150 NAutomatic adaptation to traffic flow ● ●Automatic reversal when an obstacle is detected ● ●Pharmacy opening ● ●Interlocking door system function ● -Vestibule function ● -Automatic opening in the event of a power failure adjustable standardAutomatic closing in the event of a power failure adjustable not availableFunction in the event of a power failure adjustable for 30 min. / 30 cycles openAutomatic opening in the event of a fault not available standardApprovals DIN 18650
EN 16005DIN EN ISO 13849: Performance
Level D
DIN 18650EN 16005
DIN EN ISO 13849: Performance Level D
AutSchR● = YES- = NOT AVAILABLE
29Sliding door systems
Automatic sliding door systems
GEZE POWERDRIVE PL
12
3
45 6 7
Drive components
1 = Transformer2 = Locking3 = Roller carriage4 = Control unit
5 = Rechargeable battery6 = Fan7 = Motor
Technical data PL PL-FRTransformer Ring core with fuse and main switchVoltage 230 VFrequency 50 – 60 HzCapacity rating 200 WLocking Toothed belt locking, electromagnetic, two-stageRoller carriage Door leaf adjustment vertical 12 mmDoor leaf adjustment horizontal 40 mmAnti-tilt protection standardSelf-cleaning ● ●Control unit DCU1-NT DCU1-2M-NTWith fault memory ● ●With memory for statistical data ● ●Software update possible ● ●Optional bus interface ● ●Connection for fire alarm system ● ●Power supply for peripherals ● ●Programmable inputs 3 pc.Programmable outputs 2 pc.Rechargeable battery NiCd, 24 V, 700 mAhMotor Gear motor Double gear motorTorque 400 Ncm● = YES
Fittings Powerdrive PLISO glass fine-framed ●MONO glass fine-framed ●ESG clamping profile ●All-glass system (GGS) -Integrated all-glass system (IGG) -Frame leaf (provided by customer) ●Wooden leaf (provided by customer) ●● = YES- = NOT AVAILABLE
Fitting versions
30 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE POWERDRIVE PL
Calculation of the drive length AL in mm*
Powerdrive PL PL-FR**Opening width (ÖW) Drive length (AL) Opening width (ÖW) Drive length (AL)
2-leaf 800 - 3000 2 x ÖW + 100 800 - 3000 2 x ÖW + 1001-leaf 700 - 3000 2 x ÖW + 65 700 - 3000 2 x ÖW + 65* Minimum overall length of the complete system with ISO glass profile system** Request drawing for FR variations (FR-RWS, FR-LL)!
Note:Opening widths of escape route sliding doors < 1000 mm are only permitted in exceptional cases.A continuous floor guide is recommended for external systems from an opening width of 2000 mm.The minimum opening widths depend on the requirements of building law.
Calculation of leaf and glass dimension in mm
ISO glass with aluminium secondary closing edge
ISO glass with rubber secondary closing edge ESG
Leaf width 1-leaf ÖW + 40 ÖW + 35 ÖW + 352-leaf ÖW /2 + 40 ÖW / 2 +35 ÖW / 2 +35
Leaf height with cover 150 mm DHwith cover 200 mm DH + 50
Glass width 1-leaf ÖW ÖW ÖW + 92-leaf ÖW / 2 ÖW / 2 ÖW / 2 + 9
Glass height FH - 90 FH - 90 FH - 85Glass thickness 22 22 10, 12
Note: max. leaf ratio width to height 1:4
AL
ÖW
GB
GH
DH
AL = Drive lengthDH = Passage heightGB = Glass widthGH = Glass heightÖW = Opening width
31Sliding door systems
Automatic sliding door systems
GEZE POWERDRIVE PL
With ISO/MONO glass fitting – without side panelsDrawing no. 70506-ep01
185
min
. 15
150
DH
607
3068
Floor guide: for floor mounting Floor guide: adjustable for wall assembly
DH
200
min
. 15
185
30
60
Floor guide: continuous
1-leaf door system
2-leaf door system
LD = Clear passageFW = Travel pathFB = Leaf widthÖW = Opening widthVRS = Drive extension rightDH = Passage height
LD = ÖW+12 VRS
FW = ÖW FB = ÖW+3535 30 50
12
75
LD = ÖW+2
35 30 2 40FB = ÖW/2+35 FB = ÖW/2+40
32 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE POWERDRIVE PL
With ISO/MONO glass fitting – with side panelsDrawing no. 70506-ep02
86
DH
185
min
. 15
150
Door system with door leaf and side panels under drive
185
min
. 15
200
86
DH
Door system with door leaf and side panels under drive
185 35
200
DH
83
Door system with door leaf and side panels under girder section
Note: see installation drawing for area of application
5 5LB
STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5
FW = ÖW/240 30
2FB = ÖW/2+40
Installation: self-supporting installation
STB = (LB-ÖW)/2-5LB
LD = ÖW+2 STB = (LB-ÖW)/2-5 55
40 302FB = ÖW/2+40FW = ÖW/2
Installation: wall assembly with longer drive and girder section between the walls
LB25 25STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5
40 302FB = ÖW/2+40FW = ÖW/2
Installation: wall assembly
LB = Clear construction widthLD = Clear passageFW = Travel pathFB = Leaf width
STB = Side panel widthDH = Passage heightÖW = Opening width
33Sliding door systems
Automatic sliding door systems
GEZE POWERDRIVE PL
With protective leafDrawing no. 70499-ep05
185
min
. 15
200
DH
8
129
20
Protective leaf: drive installationDH = Passage height
185
min
. 15
150
DH
8
129
20
Protective leaf: wall assembly
95 84
Protective leaf
34 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE POWERDRIVE PL
Toughened safety glass clamp fitting – without side panelDrawing no. 70506-ep03
185
min
. 15
150
DH
773
18
62
Floor guide: for floor mounting
185
min
. 15
200
DH
Floor guide: adjustable for wall assembly
1-leaf door system
2-leaf door system
LD = Clear passageFW = Travel pathFB = Leaf widthÖW = Opening widthVRS = Drive extension rightDH = Passage height
LD = ÖW+6 VRS
FW = ÖW32 30 40
60
6FB = ÖW+32
LD = ÖW+4
32 304FB = ÖW/2+32
35Sliding door systems
Automatic sliding door systems
GEZE POWERDRIVE PL
Toughened safety glass clamp fitting – with side panelDrawing no. 70506-ep04
185
min
. 15
150
DH
55
Door system with door leaf and side panels under drive
185
min
. 15
200
DH
55
Door system with door leaf and side panels under drive
185 35
200
DH
79
Door system with door leaf and side panels under girder section
Note: see installation drawing for area of application
LB
STB = (LB-ÖW)/2-5 LD = ÖW+4 STB = (LB-ÖW)/2-55 5
32 30
FW = ÖW/2 FB = ÖW/2+32 4
Installation: self-supporting installation
LB
5 STB = (LB-ÖW)/2-5 LD = ÖW+4 STB = (LB-ÖW/2-5
FW = ÖW/2
32 30
5
FB = ÖW/2+32 4
Installation: wall assembly with longer drive and girder section between the walls
22 LB 22
STB = (LB-ÖW)/2-5 LD = ÖW+4 STB = (LB-ÖW)/2-5
32 30
4FW = ÖW/2 FB = ÖW/2+32
Installation: wall assembly with girder section
LB = Clear construction widthSTB = Side panel widthLD = Clear passageFW = Travel path
DH = Passage heightFB = Leaf widthÖW = Opening width
36 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE POWERDRIVE PL
ÖW
DFB = ÖW + D - 8FW = ÖW
40
90
8
With on-site wooden leafDrawing no. 70506-ep09
DH
150
FH =
DH
- 10
7185
Version with 150 mm cover and floor guide for floor mounting
DH
200
FH =
DH
+ 4
0
185
7
60 22
Version with 200 mm cover and continuous floor guide
1-leaf door system
2-leaf door system
D = ProjectionFB = Leaf widthFW = Travel path
ÖWÖW/2
FB = ÖW/2 + DD
FW = ÖW/2
2
ÖW = Opening widthDH = Passage clearanceFH = Leaf height
37Sliding door systems
Automatic sliding door systems
SPECIAL FUNCTIONS FOR EMERGENCY EXIT ROUTES
Special versions of sliding door systems
Solutions for special purposes
The GEZE Slimdrive SL drive is available in numerous special versions. These are always used when the standard version of the sliding door system is not suitable.
• GEZE Slimdrive SLT: Use in slim glass façades for 2- or 4-leaf doors.
• GEZE Slimdrive SL RC2: Sliding doors with burglar resistance in accordance with resistance class 2. Also optionally available as a version for escape and rescue routes (SL RC2-FR).
• GEZE Slimdrive SL-BO: This version is used in escape and rescue routes. In addition to the sliding function, these doors can be swung open using a turn fitting.
• GEZE Slimdrive SL-RD: Use as a smoke-proof sliding door thanks to flexible and heat-resistant seals at the perimeter.
• GEZE Slimdrive SF: Where space is restricted with maximum passage clearances, this version can be used to realise a folding door system.
• GEZE Slimdrive SL-T30: For applications where both fire-retardant doors in accordance with DIN 4102 and smoke-proof doors in ac-cordance with DIN 18095 are needed.
• GEZE Slimdrive SLV: This version can be used for corner sliding doors with angles between 90° and 270°.
• GEZE Slimdrive SL inclined: For the use of 2-leaf sliding doors in inclined glass façades with opening widths of up to 2500 mm.
Slimdrive SLT with IGG, Cafe Luitpold Munich, Germany (photo: Robert Sprang)
38 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SLT
GEZE Slimdrive SLT
Perfect integration even in the narrowest of glass façades
The GEZE Slimdrive SLT is used on 2 or 4-leaf telescopic sliding doors made of 22 mm insulated glass or frameless door leaves with concealed fittings (IGG). It moves internal and external doors with leaf weights of up to a 320 kg reliably, inconspicuously and invisibly, thanks to the low overall height of only 7 cm. The drive makes opening widths of up to 3600 mm possible.
Technical data
Product features SLT SLT-FRFor 1-leaf door systems - -For 2-leaf door systems ● ●For 4-leaf door systems ● ●Height 70 mmDepth 247 mmLeaf weight (max.) 2-leaf 80 kgLeaf weight (max.) 4-leaf 80 kgOpening width 2-leaf 1000 – 3000 mmOpening width 4-leaf 1600 – 3600 mmTemperature range -15 – 50 °CDisconnection from mains Main switch in the driveOpening speed (max.) 0.8 m/sClosing speed (max.) 0.8 m/sHold-open time 0 – 60 SAdjustable opening and closing force (max.) 150 NAutomatic adaptation to traffic flow ● ●Automatic reversal when an obstacle is detected ● ●Pharmacy opening ● ●Interlocking door system function ● -Vestibule function ● -Automatic opening in the event of a power failure adjustable standardAutomatic closing in the event of a power failure adjustable not availableFunction in the event of a power failure adjustable for 30 min. / 30 cycles openAutomatic opening in the event of a fault not available standardApprovals DIN 18650
EN 16005DIN EN ISO 13849: Performance Level D
● = YES- = NOT AVAILABLE
39Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SLT
12
34
5
1 = Transformer2 = Lock3 = Control unit4 = Rechargeable battery5 = Motor
Drive components
Technical data SLT SLT-FRTransformer Ring core with fuse and main switchVoltage 230 VFrequency 50 – 60 HzCapacity rating 150 WLock Toothed belt locking, electromagnetic, two-stageRoller carriage Door leaf adjustment vertical 7 mmDoor leaf adjustment horizontal 7 mmAnti-tilt protection OptionalSelf-cleaning - -Control unit DCU1-NT DCU1-2M-NTWith fault memory ● ●With memory for statistical data ● ●Software update possible ● ●Optional bus interface ● ●Connection for fire alarm system ● ●Power supply for peripherals ● ●Programmable inputs 3 pc.Programmable outputs 2 pc.Rechargeable battery NiCd, 24 V, 700 mAhMotor Gear motor Double gear motorTorque 400 Ncm● = YES- = NOT AVAILABLE
40 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SLT
Fittings SLTISO glass fine-framed ●MONO glass fine-framed -ESG clamping profile -All-glass system (GGS) -Integrated all-glass system (IGG) ●Frame leaf (provided by customer) -Wooden leaf (provided by customer) -● = YES- = NOT AVAILABLE
Fitting versions
Robert Bosch Hospital, Stuttgart, Germany (photo: Nikolaus Grünwald)
41Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SLT
Calculation of the drive length AL in mm*
Slimdrive SLT Slimdrive SLT-FROpening width (ÖW) Drive length (AL) Opening width (ÖW) Drive length (AL)
4-leaf 1600 - 1999 ÖW + 1180 1600 - 1999 ÖW + 11802000 - 3600 1.5 x ÖW + 150 2000 - 3600 1.5 x ÖW + 150
2-leaf, left hand slide to open
1000 - 1360 ÖW + 770 1000 - 1560 ÖW + 8701360 - 3000 1.5 x ÖW + 90 1560 - 3000 1.5 x ÖW + 90
2-leaf, right hand slide to open
1000 - 1460 ÖW + 780 1000 - 1660 ÖW + 8801460 - 3000 1.5 x ÖW + 50 1660 - 3000 1.5 x ÖW + 50
* Minimum overall length of the system with ISO glass profile system
Note:Opening widths of escape route sliding doors < 1000 mm are only permitted in exceptional cases.A continuous floor guide is generally recommended for outdoor systems.The minimum opening widths depend on the requirements of building law.
Calculation of leaf and glass dimensions in mm
Depending on the opening width and passage heightInternal leaf External leaf
Leaf width 2-leaf ÖW / 2 + 404-leaf ÖW / 4 + 40
Leaf height 2 or 4-leaf DH - 17Glass width 2-leaf ÖW / 2 ÖW / 2 - 10
4-leaf ÖW / 4 ÖW / 4 - 10Glass height 2 or 4-leaf FH - 90 FH - 90Glass thickness 22 22
Note:max. leaf ratio width to height 1:4 or 1:5 in the case of 4-leaf systems, ÖW 1600 - 2000 mm
70
AL
ÖW
GB
GH
DH
AL = Drive lengthDH = Passage heightGB = Glass widthGH = Glass heightÖW = Opening width
42 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SLT
Girder section
2-leaf
2500
3000
2000
300020001000
DH
[mm
]
ÖW [mm]
3500
1500 2500
DH = Passage heightÖW = Opening width
4-leaf
2500
3600D
H [m
m] 3000
2000
ÖW [mm]
30002000
3500
2500
DH = Passage heightÖW = Opening width
Profiles
Standard area girder section SL Additional space EC/SL girder section Girder section and track additionally suspen-ded from the ceiling
43Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SLT
With ISO/MONO glass fitting – without side panelDrawing no. 70487-ep01
250
70D
H
30 23 30
121
607
min
. 15
Floor guide: for floor mounting Floor guide: adjustable for wall assembly
60 60
30
Floor guide: continuous
1-leaf door system
2-leaf door system
LD = Clear passageFB = Leaf widthÖW = Opening widthDH = Passage height
LD = ÖW+1214
0
40
12
3040
40
FB = ÖW/2+40
FB = ÖW/2+40
LD = ÖW+2
40
FB = ÖW/4+40
40FB = ÖW/4+40
30 2FB = ÖW/4+40
40
FB = ÖW/4+40
40
44 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SLT
With ISO/MONO glass fitting – with side panelDrawing no. 70717-ep02 + 70717-ep04
44250
70D
H
156
Low girder section
48
250
70
140
158
DH
High girder section
LB5 5STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5
40
40 30 2 40
40
FB = ÖW/4+40
FB = ÖW/4+40 FB = ÖW/4+40
FB = ÖW/4+40
Installation: self-supporting installation
LB5 5STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5
40
40 30 2 40
40
FB = ÖW/4+40
FB = ÖW/4+40
FB = ÖW/4+40
FB = ÖW/4+40
Installation: wall assembly with longer drive and girder section between the walls
25 25LBSTB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5
40
FB = ÖW/4+4040 30 2 40
FB = ÖW/4+40
40
FB = ÖW/4+40 FB = ÖW/4+40
Installation: wall assembly
Note: see installation drawing for area of application
LB = Clear construction widthSTB = Side panel widthLD = Clear passage
FB = Leaf widthÖW = Opening widthDH = Passage height
45Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SLT
With safety leafDrawing no. 70487-ep01
Installation: on post-rail construction with safety leaf
DH = Passage height
Note: see installation drawing for area of application
Installation: on post-rail construction with safety leaf
DH
70
25035
18
21,5
min
. 38,
5
46 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SLT
LD = ÖW+7,5
48 4840
VRS
140
7,5FB = ÖW/4+48
FB = ÖW/4+48
With integrated all-glass system (IGG) – with and without side panelsDrawing no. 70487-ep07
250
min
. 15
70D
H
2030
7
60 60125
Version with leaf
250
min
. 15
70D
H
177
Version with leaf and side panels
2-leaf door system
4-leaf door system
FB = Leaf widthÖW = Opening widthVRS = Drive extension rightDH = Passage height
LB5 STB = (LB-LD)/2-5 LD = ÖW+9 STB = (LB-LD)/2-5 5
48 48
FB = ÖW/4+48FB = ÖW/4+48 9
LB = Clear construction widthSTB = Side panel widthLD = Clear passage
47Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL RC2
GEZE Slimdrive SL RC2
Sliding doors with burglar resistance in accordance with resistance class 2 (RC2)
The burglar-resistant automatic linear sliding door system GEZE Slimdrive SL RC2 and the escape and rescue route version SL-FR RC2 make burglars’ lives difficult. It was especially developed for building entrances with increased safety requirements. Both versions have been tested in accordance with component resistance class 2 (RC2) in compliance with DIN V ENV 1627 to 1630. This means that they can withstand att-empts to be levered open using tools of the RC2 class such as screwdrivers, pliers and wedges, and can withstand static and dynamic loads. Opportunists are stopped effectively and security companies gain response time. RC2 sliding doors are particularly used in banks, pharmacies, jewellers, petrol stations and IT rooms. The burglar-resistant RC2 function is only enabled in „NIGHT“ mode of operation. In „NIGHT“ mode of operation the door does not fulfil any escape route requirements. It is necessary to ensure that there is nobody in the building or that sufficient other escape route doors are available.
Hycro Grand Centre, Zagreb, Croatia (photo: Robert Les)
48 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL RC2
Calculation of the drive length AL in mm*
Slimdrive SL RC 2 Slimdrive SL-FR RC 2**Opening width (ÖW) Drive length (AL) Opening width (ÖW) Drive length (AL)
2-leaf 900-1000 ÖW + 1100 900-1000 ÖW + 11001000-3000 2 x ÖW + 100 1000-3000 2 x ÖW + 100
1-leafleft hand slide to open
800 - 3000 2 x ÖW + 120 800 - 870 ÖW + 990870 - 3000 2 x ÖW + 120
1-leafright hand slide to open
800-3000 2 x ÖW + 120 800-820 ÖW + 940820-3000 2 x ÖW + 120
* Minimum overall length of the complete system with ISO glass profile system** Request drawing for FR variations (FR-RWS, FR-LL)!
Note:Opening widths of escape route sliding doors < 1000 mm are only permitted in exceptional cases.The minimum opening widths depend on the requirements of building law.
Calculation of leaf and glass dimensions in mm (ISO glass profile system)
ISO glass (in accordance with RC2)Leaf width 1-leaf ÖW / + 40
2-leaf ÖW / 2 + 40Leaf height 1-leaf / 2-leaf DH - 17Glass width 1-leaf ÖW - 20
2-leaf ÖW / 2 - 20Glass height 1-leaf / 2-leaf FH - 90Glass thickness 1-leaf / 2-leaf max. 23.5
Note: max. leaf ratio width to height 1:4
AL
ÖW
GB
GH
DH
AL = Drive lengthDH = Passage heightGB = Glass widthGH = Glass heightÖW = Opening width
Note: The burglar-resistant function RC2 is only enabled in „NIGHT“ mode of operation. In „NIGHT“ mode of operation the door does not fulfil any es-cape route requirements. It is necessary to ensure that there is nobody in the building or that sufficient other escape route doors are available.
49Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL RC2
Area of application
1-leaf and 2-leaf
3500
DH
[mm
]
3000
2000
ÖW [mm]
300020001000
2500
DH = Passage heightÖW = Opening width
Profiles
Standard area of application Extended area of application with bolt reinforcement (steel tube) in the passage area (on site).
Note: A continuous floor guide (on request) is recommended for installation situations with high wind loads (from wind force 5).Version with continuous floor guide based on RC2.
50 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL RC2
With ISO/MONO glass fitting – without side panelDrawing no. 70484-ep-46/47
64 6830
8
60
189
min
. 15
70D
H
Floor guide: with reinforced supporting bracket at individual points
1-leaf door system
2-leaf door system
AL = Drive lengthLB = Clear construction widthDH = Passage height
131
AL
LB
FB = ÖW+40
LD = ÖW+12
113
75.5
80
53
40
85 60
LD = ÖW+2
40 250
FB = ÖW+40
LD = Clear passageFB = Leaf widthÖW = Opening width
51Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL RC2
With ISO/MONO glass fitting – with side panelDrawing no. 70484-ep-46/47
Note: see installation drawing for area of application
64
189 42
70m
in. 1
5
105
DH
Floor guide: with reinforced supporting bracket at individual points
1-leaf door system
Installation: wall assembly
AL = Drive lengthFB = Leaf widthFW = Travel pathDH = Passage height
LB = Clear construction widthLD = Clear passageÖW = Opening widthSTB = Side panel width
LB
AL
FB = ÖW+40 FW= ÖW
STB = LB-(ÖW+72)+25 LD = ÖW+1215
5
85
40
59
137
80
40
2530
5
60
LB25 25STB = (LB-ÖW)/2-5 LD = ÖW+2 STB = (LB-ÖW)/2-5
3040 50 2
FW = ÖW/2 FB = ÖW/2+40
52 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL-BO
GEZE Slimdrive SL-BO
Emergency opening by leaves and side panels swinging open
GEZE sliding doors with break-out function are used on escape and rescue routes. The BO function allows the leaves to be swung open in the direction of emergency exit – as a sliding door system with a turn fitting, so to speak. Sliding doors with BO function have side panels that can be swung open and are available for 1 or 2-leaf door systems. Doors with escape route requirements are used in regions where redundant drives are not accepted. BO sliding doors are used in entrance areas where a large opening width is required, e.g. in car dealerships.
Hörsaalzentrum Klinikum rechts der Isar, Munich, Germany (photo: Robert Sprang)
53Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL-BO
With ISO/MONO glass fittingDrawing no. 70485-ep51
254
min
. 15
7060
DH
35
135150
Door system with door leaf and side panels
Installation: self-supporting installation
Installation: wall assembly
LB = Clear construction widthSTB = Side panel widthLD = Clear passage
LB
5 40 STB = ÖW/2+239 LD = ÖW+2 STB = ÖW/2+239 40 5
40
FB = ÖW/2+40
30
2
25 LB 25
15 STB = ÖW/2+239 LD = ÖW+2 STB = ÖW/2+239 15
40 30
2FB = ÖW/2+40
FB = Leaf widthÖW = Opening widthDH = Passage height
54 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SL-RD
GEZE Slimdrive SL-RD
Enhanced safety thanks to smoke-proof sliding doors (RD)
GEZE smoke-proof sliding doors meet all smoke protection requirements and allow various design possibilities, thanks, among others, to the 7 cm drive height of the Slimdrive product line. This sliding door system is made up of the drive and the sophisticated smoke-proof profile system. The continuous floor guide and flexible, heat-resistant seals at the perimeter guarantee smoke-proofing. In the event of a fire, release is via a smoke detector or an external fire detector system.
Andels Hotel, Berlin, Germany (photo: Stefan Dauth)
55Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL-RD
ÖW
40 30 19
FB = ÖW/2 + 30,5
With ISO/MONO glass fittingDrawing no. 70484-ep39
189
70
6060
8
DH
60 20
Drive on bolt profile
231
Drive with side panels on bolt profile
2-leaf door system
4-leaf door system
FB = Leaf widthLB = Clear passage clearanceÖW = Opening widthDH = Passage height
LB
ÖW
40 30 19FB = ÖW/2 + 30,5
56 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SF
GEZE Slimdrive SF
Drive system for automatic folding doors
Wherever maximum passage widths must be achieved in tight spaces, the use of automatic doors with horizontal folding door leaves is the optimum solution. The GEZE automatic folding door system with the 7 cm drive height characteristic of the Slimdrive family guarantees ma-ximum passage height for conversions, for example. The low overall height of the drive makes it almost unnoticeable, yet it is highly efficient. Retrofitting to existing façades is no problem. The optional break axle feature ensures the door is locked safely at night.
Technical data
Product features SF SF-FRFor 1-leaf door systems - -For 2-leaf door systems - -For 4-leaf door systems ● ●Height 70 mmDepth 282 mmLeaf weight (max.) 4-leaf 40 kgOpening width 4-leaf 900 – 2000 mmTemperature range -15 – 50 °CIP rating IP20Disconnection from mains Main switch in the driveOpening speed (max.) 0.8 m/sClosing speed (max.) 0.8 m/sHold-open time 0 – 60 SAdjustable opening and closing force (max.) 150 NAutomatic adaptation to traffic flow ● ●Automatic reversal when an obstacle is detected ● ●Pharmacy opening ● ●Interlocking door system function ● -Vestibule function ● -Automatic opening in the event of a power failure adjustable standardAutomatic closing in the event of a power failure adjustable not availableFunction in the event of a power failure adjustable for 30 min. / 30 cycles openAutomatic opening in the event of a fault not available standardApprovals DIN 18650
EN 16005DIN EN ISO 13849: Performance Level D
● = YES- = NOT AVAILABLE
57Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SF
Technical data SF SF-FRTransformer Ring core with fuse and main switchVoltage 230 VFrequency 50 – 60 HzCapacity rating 150 WRoller carriage Control unit DCU1-NT DCU1-2M-NTWith fault memory ● ●With memory for statistical data ● ●Software update possible ● ●Optional bus interface ● ●Connection for fire alarm system ● ●Power supply for peripherals ● ●Programmable inputs 3 pc.Programmable outputs 2 pc.Rechargeable battery NiCd, 24 V, 700 mAhMotor Gear motor Double gear motorTorque 400 Ncm● = YES
Drive components
12
34
1 = Transformer2 = Rechargeable battery3 = Control unit4 = Motor
58 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SF
Fittings SFISO glass fine-framed ●MONO glass fine-framed ●ESG clamping profile -All-glass system (GGS) -Integrated all-glass system (IGG) -Frame leaf (provided by customer) -Wooden leaf (provided by customer) -● = YES- = NOT AVAILABLE
Fitting versions
Kulturhotel Fürst Pückler, Bad Muskau, Germany (photo: Stefan Dauth)
59Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SF
Calculation of the drive length AL in mm*
Slimdrive SFOpening width (ÖW) Drive length (AL)
4-leaf 900 - 2000* ÖW + 334* Minimum overall length of the complete system with ISO glass profile system
Note:Opening widths of emergency route sliding doors < 1000 mm are only permitted in exceptional cases.A continuous floor guide is generally recommended for outdoor systems.A continuous floor guide is recommended from 1400 mm for indoor use.The minimum opening widths depend on the requirements of building law.
Calculation of leaf and glass dimensions in mm
Slimdrive SFDriving leaf Glass width = ÖW / 4 + 10.5Following leaf Glass width = ÖW / 4 + 1.5Glass height DH - 82Glass thickness ISO glass 22Glass thickness ESG/VSG 10
Note: max. leaf ratio width to height 1:4
1 2
1 = Following leaf2 = Driving leaf
70D
H
GH
AL
GB
ÖW
AL = Drive lengthDH = Passage heightGB = Glass widthGH = Glass heightÖW = Opening width
60 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SF
With ISO/MONO glass fittingDrawing no. 70497-ep01 + 70497-ep02
282m
in. 1
570
DH
607
30
68
20
Door system with door leaf
LD = ÖW+244
122 ÖW 122
45 25 32 82 30 8
FFB = ÖW/4+41,5 AFB = ÖW/4+51,5
45
84
4-leaf door system
LD = Clear passageÖW = Opening widthFFB = Width of following leafAFB = Width of driving leafDH = Passage height
61Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL-T30
GEZE Slimdrive SL-T30
Fire protection sliding doors with hold-open and release mechanism, permanent closing in the event of a fire
Fire protection doors are used to stop fire getting through wall openings in fire-retardant walls. Fire protection doors of resistance class T30 are fire-retardant doors in accordance with DIN 4102 and smoke-proof in accordance with DIN 18095. The closing function is guaranteed even in the event of a fire. After the fire alarm has been raised and/or the mains supply voltage has failed, the door automatically closes by means of stored energy. The necessary fire resistance class for a door depends on what the building is used for and the requirements made on the wall where the door is installed. The T30 sliding door systems are distributed in cooperation with partner companies.
Bistro-Kunsthalle, Ulm, Germany (photo: Nikolaus Grünwald)
62 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIMDRIVE SLV
GEZE Slimdrive SLV
Design freedom with corner sliding doors (SLV) – for angles between 90° and 270°
GEZE offers the perfect technical solution for the simple movement of corner sliding doors: The Slimdrive SLV drive – with an overall height of only 7 cm of course – is used wherever a special extravagant design is needed or the entrance area has to follow certain architectural demands. If the Slimdrive SLV-FR is used, the corner sliding door can also be used on escape and rescue routes.
Trendpark, Neckarsulm, Germany (photo: Dirk Wilhelmy)
63Sliding door systems
Automatic sliding door systems
GEZE SLIMDRIVE SL INCLINED
GEZE Slimdrive SL inclined
Fancy appearance and perfect integration in inclined glass façades
The GEZE drives for inclined sliding doors are ideal for narrow glass façades in post-rail structures. These sliding doors are used on 2-leaf doors and allow opening widths of up to 2500 mm. Inclined sliding doors are framed and offer a sleek appearance in fancy application. They can be used for inclined angles up to 9.9°. Larger angles are available on request.
Villa Soravia, Millstatt, Carinthia, Austria (photo: Helmut Kolaric)
64 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
SPECIAL FUNCTIONS FOR EMERGENCY EXIT ROUTES
Redundant sliding doors for escape and rescue routes with locked exit only function (FR-LL)
Protected against forced opening from the outside through permanent locking with duplicate processing
Door systems on escape and rescue routes that are set in the exit only (one-way) mode of operation can also be locked via the intelligent control unit and the night-locking system thanks to this GEZE solution. This increases the protection of the door against unauthorised opening from the outside. This type-tested FR-LL variant is ideal for use in areas where the exit only mode of operation is to be used over a longer period. FR-LL sliding doors are used especially in banks, theatres and universities.
This version can be realised using the following drive series: Slimdrive, ECdrive and Powerdrive.
Sparkasse, Ulm, Germany (photo: Nikolaus Grünwald)
65Sliding door systems
Automatic sliding door systems
SPECIAL FUNCTIONS FOR EMERGENCY EXIT ROUTES
Redundant sliding doors for escape and rescue routes in both directions (FR-DUO)
For public buildings with several escape routes
This GEZE solution for special applications can be used in public buildings. Depending on how the rooms or building sections are used, es-cape routes in both directions are often needed. The type-tested GEZE automatic sliding door can be used as an escape route door in both directions by using two movement detectors monitored on both sides. FR-DUO sliding doors are used especially in offices, airports and railway stations.
This version can be realised using the following drive series: Slimdrive, ECdrive and Powerdrive.
Cafe Luitpold, Munich, Germany (photo: Robert Sprang)
66 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
SPECIAL FUNCTIONS FOR EMERGENCY EXIT ROUTES
Cologne-Bonn Airport, Germany (photo: Martin Jakob)
Redundant sliding doors for locked escape and rescue routes (FR-RWS)
Additional locking with monitored duplicate processing system and redundant emergency opening button
With the FR-RWS variant for automatic GEZE sliding doors, the door system can be adjusted by an intelligent control unit and monitored locking system in such a way that it is only possible to pass through the door on request. In the event of a power failure or other problems, the door reliably opens the escape route. FR-RWS sliding doors are used particularly in airports, railway stations, nursing and care homes.
This version can be realised using the following drive series: Slimdrive, ECdrive and Powerdrive.
67Sliding door systems
Automatic sliding door systems
SPECIAL FUNCTIONS FOR EMERGENCY EXIT ROUTES
Sliding doors for escape and rescue routes according to CO48 (France)
Emergency opening using rubber cord
In the event of a power failure, the door can be opened once via the built-in elastic rope. CO48 sliding doors with escape route requirement are used in France and other regions where this solution is accepted.
This version can be realised using the following drive series: Slimdrive, ECdrive and Powerdrive.
Grottes de Lascaux, France (photo: Jean-Luc Kokel)
68 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
SOLUTIONS AND FUNCTIONS
Accessible toilet
Accessible toilets must be designed in such a way that people with all sorts of different handicaps can use the facilities without needing help. GEZE sliding door drives provide an indispensable service for this application, and guarantee a high level of convenience.
Function descriptionThe door opens automatically after the elbow switch on the outside of the toilet has been pressed, and closes automatically after the set hold-open time has passed. When the push button is activated inside the toilet cabin, the system is switched to the exit only mode of operation, which means the outer push button can no longer open the door. In addition, the lights are activated and signal that the toilet is occupied. The drive keeps the door locked in the closed position by means of motor power. Pressing the internal push button again switches the mode of operation back to automatic. The OCCUPIED signs go out. The door opens and the external push button is cleared again.A WC alarm can be triggered via an additional external signal transmitter (horn/light) if the system is locked for longer than 30 minutes. This signal can be displayed in a central position (gate). As an option, this message can be outputted as a potential-free contact to a nurse-calling system.In the event of a power failure, the door can always be opened using the emergency open button. Light curtains monitor the passage area onthe inside and outside (two units) as well as the sliding door‘s travel path in the „open“ direction.
1 = Elbow switch (inside and outside)2 = „Occupied“ indicator light3 = Emergency-stop switch (recommended installation height: 1600 mm)4 = Active infrared light curtain5 = Emergency call pull switch6 = Programme switch with key switch7 = Sliding door leaf ISO/ESG (toughened safety glass) on site, fine-framed with satin finish foil, alternatively wooden leaf8 = Side panel
1
2
61
2
3
4
5
78
69Sliding door systems
Automatic sliding door systems
SOLUTIONS AND FUNCTIONS
Vestibule systems
Vestibule systems are used to avoid draughts and reduce heat exchange. Preferably only one door should be opened.
Direction-detecting radar movement detectors only activate the door when people move towards it. This means the door closes more quickly after a person. A separate programme switch is compulsory for door systems in escape and rescue routes.
~ 3500 mm
~ 45
00 m
m
min. 200 mm
~ 14
00 m
m
Combination example 1
~ 3500 mm
~ 45
00 m
m
min. 200 mm
~ 14
00 m
m
Combination example 2
~ 3500 mm
> 40
00 m
m ~ 14
00 m
m
min. 200 mm
Combination example 3
~ 6000 mm
> 40
00 m
m ~ 14
00 m
m
min. 200 mm
Combination example 4
grey = Detection area
70 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
SLIDING DOOR FITTINGS
Sliding door fittings
Complete creative freedom thanks to innovative fitting systems
GEZE supplies the following fitting variations for all sliding door systems:
Door leaf with ISO glass fine-framedAttractive door leaves with an extremely slim aluminium frame. They combine the advantages of the frame (e.g. seals) with an inconspicuous design.
Door leaf with MONO glass fine-framedThe same frame as with the ISO variation but with one single glass pane made of 10 mm ESG or VSG.VSG = Verbund-Sicherheits-Glas (= laminated safety glass)ESG = Einscheiben-Sicherheits-Glas (= toughened safety glass)
Door leaf with ESG clamping profile fine-framedProfile system for 10 mm or 12 mm ESG. The glass pane is clamped in place near the top. Additional aluminium profiles at the sides and bottom ensure tightness, floor guide and compatibility with DIN 18650.
Frame leafThe drive can be combined with door leaves made of a wide range of different frame profile systems, also thermally separated.
Wooden leavesThe drive can be combined with door leaves provided by the customer made of a wide range of materials e.g. wood.
Integrated all-glass system (IGG)The profiles and the fittings system are integrated invisibly between the panes – without protruding or visible parts on theglass surface.
All-glass system (GGS)All-glass design fittings for single point fixing offer maximum transparency. All the visible fittings are made of solid stainless steel.
Fitting variations
Fittings
ECdr
ive
SL N
T
Pow
erdr
ive
PL
Slim
driv
e SL
T
Slim
driv
e SL
RD
Slim
driv
e S
-BO
Slim
driv
e SF
ISO glass fine-framed ● ● ● ● ● ● ●MONO glass fine-framed ● ● ● - ● - ●ESG clamping profile ● - ● - - - -All-glass system (GGS) - ● - - - - -Integrated all-glass system (IGG) - ● - ● - - -Framed leaf (on site) ● ● ● - - - -Wooden leaf (on site) ● ● ● - - - -Hermetic leaf - - ● - - - -Fire protection leaf T30 (Hörmann) - - - - - - -● = YES- = NOT AVAILABLE
71Sliding door systems
Automatic sliding door systems
SLIDING DOOR FITTINGS
ISO glass fine-framed MONO glass fine-framed ESG clamping profile
Frame leaf (provided by customer) Wooden leaf (provided by customer) Integrated all-glass system (IGG)
All-glass system (GGS) Hermetic leaf
72 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
ACCESSORIES
Operating automatic sliding doors
GEZE offers programme switches for a wide range of individual needs. The switches are suitable for universal use – for surface-mounted or flush-mounted installation. The following switch types are available:
Display programme switch (DPS)Keypad programme switch (TPS)Mechanical programme switch (MPS)
The following modes of operation can be set:
“Permanently open”The door moves to the OPEN position and remains open. Movement detector or opening button are deactivated. “Night mode”The movement detectors are switched inactive, the door closes. Option: the door leaves are locked electrically to prevent forced opening.
“Exit only” (one-way)The door only opens and closes when someone goes out from the inside. The movement detector outside is switched inactive, the one inside is switched active.
“Automatic”The door opens as soon as it is activated via the movement detector or keys, and closes after a certain time which can be individually adjusted. Safety sensors protect the leaves’ travel path. If there is someone in the door opening, the door will not close.
“Reduced opening width”The door opens only part of the possible opening width (can be set). In escape doors, the reduced opening width must be at least as large as the necessary escape route width. The reduced opening width may not be less than 30 % of the opening width.
“OFF” Drive and sensors are switched off, the door leaves can be moved manually.
Securing the programme switchesAutomatic sliding doors in escape and rescue routes must be secured against operation by unauthorised people. The mechanical programme switch (MPS) is also available in a version that can be locked. The display programme switch (DPS) and keypad programme switch (TPS) can be combined with a key switch. Alternatively, these programme switches can be secured using a code.
Display programme switch (DPS) Key programme switch (TPS) Mechanical programme switch (MPS)
Programme switches for selection of the mode of operation for automatic sliding doors
73Sliding door systems
Automatic sliding door systems
ACCESSORIES
Automatic activation
Reliable activation with GEZE sensors
Combined detectors Combined detectors are radar movement detectors using an infrared light curtain. Activation and protection are integrated in the sensor, reducing installation efforts. Individual attachment possibilities through wall, ceiling or integrated ceiling recess installation provide lots of creative freedom. The use of a remote control guarantees quick and easy commissioning. The sensor is reliably activated on the basis of direc-tion detection and cross-traffic fade-out. Slow movements can be detected thanks to the “slow motion detection” feature. The protection area can be configured as required. Combined detectors for escape and rescue routes offer maximum safety through integrated self-monitoring.
Radar movement detectorsRadar movement detectors register all objects that move within the radar field. All movements within the radiation range cause a time-delayed reflection which is forwarded as a door opening signal. The pre-programmed convenience setting of the GEZE radar movement detectors ensures they can be put into operation quickly. Automatic configuration is possible via keys or a remote control. Reliable detection is achieved with a clearly defined radar field. Energy can be saved through detection of people’s direction of movement. Excessive door opening is avoided since cross-traffic can be faded out.
Combined detector GC 365Combined detector GC 363
Radar movement detector GC 304
74 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
ACCESSORIES
Manual activation
Push buttonsGEZE push buttons for the wireless activation of system doors – reliable, convenient and safe at the push of a button.
Non-contact LED sensor buttonThe design-oriented and sturdy LED sensor button makes intuitive and straightforward operation possible. No great efforts are necessary for activation – touching the button slightly is sufficient. Suitable for both indoor and outdoor use, the LED sensor button can be recognised easily in the dark thanks to the blue LED lighting. In addition, the sensor has raised Braille lettering on it. An acoustic and visual signal shows activation through the button. The button is waterproof, impact-resistant and vandalism-proof. This makes it very well suited for outdoor use or installation in the floor.
Proximity switchOpen doors in a flash: with the GC 306, internal doors can be activated cleanly and comfortably without direct contact. Active infrared sensors ensure hygienic access to toilet facilities, for example. The risks of infection are also minimised in hotel kitchens, hospitals and doctors’ surgeries. The impulse generator is installed at hand height and precisely detects people and objects – independently of their direction of movement – both in the direct vicinity of only 5 cm as well as 0.5 m away. The different scanning ranges can be optimally adapted to existing environmental conditions and the wishes of the user groups. The non-contact sensor system provides maximum operating convenience – people only need to approach them to trigger the automatic opening mechanism – and is absolutely hygienic. The optimum system structure permits simple and time-saving installation in the flush-mounted box.
Radio activationGEZE radio transmitters are used for wireless activation of doors and windows as a multi-channel solution. For every additional channel, an additional electrical device or function can be switched at the push of a button. Thanks to the very small size of the radio modules, radio trans-mitters can easily be integrated in the drive or in a flush-mounted box. They can also be clipped directly into the elbow switched and mounted without wires on glass.
Push button LED sensor switch
Radio activation Plastic elbow switch Stainless steel elbow switch IP65
Non-contact proximity switch GC 306
75Sliding door systems
Automatic sliding door systems
ACCESSORIES
Electronic protection
Active infrared detectorGEZE detectors are used to secure posts, main and secondary closing edges both inside and outside. They have an invisible and non-contact protective device. Precise detection is possible through a clearly defined field, the size of which can be adjusted. Individual applications allow the use of infrared detectors as protective sensors or opening impulse generators.
Infrared photoelectric barrierGEZE safety photoelectric barriers are available as single-beam and double-beam versions. This guarantees the easy and reliable protection of main closing edges with tried-and-trusted technology. The design permits flexible installation in different door profiles. The integrated elect-ronics guarantee fast installation and compact space requirements.Note: in accordance with EN 16005 and 18650 infrared photoelectric barriers may only be used on automatic sliding doors as an additional protection with infrared detectors.
Infrared photoelectric barrier
Mechanical protection
Protective leafProtective leaves are used on escape and rescue routes if it is not possible to secure the secondary closing edges using infrared detectors. Automatic sliding doors on escape and rescue routes must be able to be opened at any time.
Safety leafSafety leaves are used to secure the cavities behind automatic sliding doors in post-rail structures.
Protective leaf Safety leaf
Active infrared detector GC 339 Active infrared detector GC 341
76 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
ACCESSORIES
Locking
GEZE Lock M hook bolt lockThe new GEZE Lock M is a manual hook bolt lock for the Slimdrive SL NT and ECdrive sliding door systems. This high-quality locking mechanism is invisibly built into the vertical profile of the door leaves, allowing the door to be locked and unlocked quickly and reliably. The door can be lo-cked and unlocked from the inside or outside using a key in the lock which is installed at a convenient height. The lock possesses an Euro profile cylinder with 3, 6 or 9 keys with the construction length 32 mm (16/16). If standard construction lengths such as 60 mm (30/30 Euro-profile dou-ble cylinder) or 40 mm (30/10 Euro profile half cylinder) are used, danger areas emerge on the basis of the surviving cylinder, which necessitate a restriction of the opening width. The Euro profile cylinder can survive without restrictions if no protective leaves are available on the inside. As an option, GEZE can provide a pushing rosette for standard lock cylinders for installation on the drive side / inside. The extremely sturdy GEZE Lock M provides excellent protection against vandalism and unauthorised access.
GEZE Lock M hook bolt lock GEZE Lock M hook bolt lock installed
GEZE Lock A hook bolt lockThe new GEZE Lock A is an automatic hook bolt lock for the Slimdrive SL NT and ECdrive sliding door systems. This high-quality single or two-point locking mechanism allows the door to be locked and unlocked quickly and reliably. The locking motor is invisibly integrated into the vertical profile of the door leaves. The sliding door control unit makes parameter setting and control easy. The manual emergency unlocking facility allows the door to be opened from the inside at any time in the event of a power failure.
GEZE Lock A hook bolt lock GEZE Lock A hook bolt lock installed
77Sliding door systems
Automatic sliding door systems
ACCESSORIES
Toothed belt lockingThis electro-magnetic bistable locking system ensures more safety, because it stays locked even without electric current. Manual emergency unlocking is possible at any time. Typical for this type of locking is permanent monitoring by the control unit. Up to two contacts for external applications (e.g. alarm systems) can be integrated as an option. Thanks to the free choice of positioning in the drive, the toothed belt locking is not only easy to install, it also makes special locking functions possible, e.g. locked pharmacy opening of the sliding doors.
Toothed belt locking
Floor lockThe GEZE floor lock is used for the easy locking of door leaves with the fine-framed ISO profile system at floor level. Customary Euro profile cylinders can be used for the floor locks. This means the solution is suitable for optimum integration in closing systems. Operation is manual, with the key, either only from the inside or from the inside and outside.
Floor lock
Rod locking
Rod lockingRod locking increases safety and protection against burglary. The multi-point locking – both upwards and in the ground – provides solid re-sistance against attempts to be levered open. The locking rod is integrated invisibly in the fine-framed ISO profile system. The system can be unlocked both electrically and mechanically. Rod locking can be used in the Slimdrive SL and Slimdrive SLT drives. Escape and rescue routes can also be protected by rod locking.
78 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
ACCESSORIES
Service Tools
GEZEconnectsBluetooth is an internationally standardised short-distance radio signal with a range of up to ten metres. The GEZEconnects software enables wire-less connection via Bluetooth between a computer and the GEZE automatic door systems. All door system settings can be carried out via an intuitive graphic interface, stored, sent by e-mail and transferred to a word processing programme as a protocol. Diagnosis functions show the most important function parameters of the door system in real time, so that problems are recognised at a glance and can be eliminated. All the pre-settings can be taken over very easily for further door systems. The convenient documentation of initial operation, servicing and diagnosis protocols as well as all statistical data can be downloaded at any time. Password protection to freeze operating parameters and servicing data guarantees there will be no unauthorised modifications made.
ST 220 service terminalMobile, handy and straightforward – that is parameter setting for the automatic GEZE door systems using the service terminal ST 220. Communi-cation and data exchange between the service terminal and the door drive is via an integrated RS485 interface. The large illuminated interface is easy to operate thanks to the plain text display. The service terminal is equipped with a readout function for servicing and diagnosis work. Power is supplied via the door system. Password protection to freeze operating parameters and servicing data guarantees there will be no unauthorised modifications made.
B E W E G U N G M I T S Y S T E M
GEZEconnects I SOFTW AREzur kabellosen Verbindung von GEZE Automatischen Türsystemen und PCs über Bluetooth
GEZ
Eco
nn
ects
I S
OFT
WA
RE
GEZE GmbHReinhold-Vöster-Str. 21-2971229 Leonberg Germany
Telefon: +49 (0)7152-203-0Telefax: +49 (0)7152-203-310
www.geze.com
Systemvoraussetzungen:
PC mit Windows XPIntel oder 100% kompatiblen Prozessor500 MB RAM1,5 GHzCD LaufwerkBluetooth Schnittstelle150 MB freier Speicherplatz
TÜRTECHNIK
AUTOMATISCHE TÜRSYSTEME
RWA UND LÜFTUNGSTECHNIK
SICHERHEITSTECHNIK
GLASSYSTEME Id.Nr. 134995 · Version 090518 · Änderungen vorbehalten
GEZEconnects I SOFTW AREzur kabellosen Verbindung von GEZE Automatischen Türsystemen und PCs über Bluetooth
B E W E G U N G M I T S Y S T E M
GEZEconnects Service terminal ST 220
Note: Parameters of GEZE drives may only be changed by technicians trained in accordance with DIN 18650/EN 16005 and authorized by the manufacturer (GEZE).
79Sliding door systems
Automatic sliding door systems
GEZE SLIDING DOOR SYSTEMS
Cable diagram control units for sliding doors
For more detailed information about connection of the activation elements and sensors see the connection diagram 160924 (English version).
HS NOT DPS
SCT
PS KA KI
*4)
*1)
*3)
*5)
KB BWA BWI SIO*4)
SIO
SM APO NÖ SIS NVWF
*4) *4)
*2)
LS
Transformer
HS Main switch (optional)
NS Emergency stop switch (optional)
DPS Display programme switch
SCT Key switch
PS Programme switch
KA Contact sensor outside (switch)
KI Contact sensor inside (switch)
KB Mechanical contact
BWI/BWA Movement detector (inside/outside)
SIO Safety sensor “Open”
SM Fault indicatorFault lamp or fault horn
APO Pharmacy opening (only possible in combination with toothed belt locking)
NÖ Emergency opening
SIS Light curtain with movement detector KA or KI
WF Interlocking door system, vestibule
NV Emergency locking
LS Light barrier *6)
Wire cross-section:
1 NYM-J 3 x 1.5 mm2
2 I-Y(ST)Y 2 x 2 x 0.6 mm
3 I-Y(ST)Y 3 x 2 x 0.6 mm
Y Scope of supply GEZE
Mains supply230V/50Hz
10A fuse on-site
Control
Gong
(on-site)
Cable feed
Supply cable(on-site)
Special element
Safety - Cable routing according to VDE 0100- Cable routing, connection and initial operation may only be carried out by authorised specialists.- GEZE does not accept any warranty and service performances in combination with external brands.
Notes1) Cable feed through the side plate or through the track on the left. To protect the cables, avoid sharp edges or use edge protection.2) Cable length max. 100 m3) Allow signal cables to protrude at least 5 m and mains cables at least 2 m out of the wall4) Contact switch (KI) not allowed for escape and rescue routes5) Optionally connectable to escape and rescue route door control units Alternative without key switch: set access code of DPS via ST 220 or GEZEconnects 6) According to DIN 18650 / EN 16005, photoelectric barriers must not be used as sole protection device in the closing area
80 GEZE AUTOMATIC DOOR SYSTEMS
Automatic sliding door systems
GEZE SLIDING DOOR SYSTEMS
References
Slimdrive SL NT, Hotel Schloss Elmau Retreat, Elmau, Germany (photo: Robert Sprang)
Slimdrive SL-FR with side panels, Olgahospital / women‘s clinic, Stuttgart, Germany (photo: Jürgen Pollak)
81Sliding door systems
Automatic sliding door systems
GEZE SLIDING DOOR SYSTEMS
Slimdrive SL NT with vestibule, Augustinum, Stuttgart, Germany (photo: Dirk Wilhelmy)
ECdrive, Augustinum, Stuttgart, Germany (photo: Dirk Wilhelmy)
82 GEZE AUTOMATIC DOOR SYSTEMS
Innovative system solutions
POTENTIAL APPLICATIONS OF GEZE PRODUCTS
01
04
06
07
20 07
10
08
11
13
11
22
17
04
06
02
14
You will find more product information in the relevant brochures, see ID numbers.
Door technology
01 Overhead door closersID 091593, ID 091594
02 Hold-open systemsID 091593, ID 091594
03 Integrated door closers ID 091609
04 Floor springs and all-glass systemsID 091607
05 Sliding door fitting systems and linear guidesID 123605, ID 000586
Automatic door systems
06 Swing doorsID 144785
07 Sliding, telescopic and folding doorsID 143639
08 Curved sliding doorsID 135772
09 Revolving doorsID 132050
10 Activation devices and sensorsID 142655
Smoke and heat extraction and window technology
11 Fanlight opening systemsID 127787
12 Electric opening and locking systemsID 154851
13 Electrical spindle and linear drivesID 154851
14 Electric chain drivesID 154851
15 Smoke and heat extraction systemsID 154851
Safety technology
16 Emergency exit systemsID 132408
17 Access control systemsID 132158
18 Panic locksID 132848
19 Electric strikesID 148666
20 Building management systemID 132408
Glass systems
21 Manual sliding wall systems (MSW)ID 104377
22 Integrated all-glass systems (IGG)ID 104366
83Sliding door systems
21
18
03
05
09
16
19
12
15
21
15 17
Door technology
The functionality, superior performance and reliability of GEZE door closers are impressive. A common design across the range, the ability to use them on all common door leaf widths and weights, and the fact that they can be individu-ally adjusted makes their selection simple. They are con-tinually being improved and enhanced with up-to-date fea-tures. For example, the requirements of fire protection and accessibility are fulfilled with a door closer system.
Automatic door systems
GEZE automatic door systems open up a huge variety of options in door design. The latest, innovative high-per-formance drive technology, safety, ease of accessibility and first class universal drive design set them apart. GEZE offers complete solutions for individual requirements. A dedicated division is responsible for the development and construction of individual special designs.
Smoke and heat extraction and window technology
GEZE smoke and heat extraction systems and ventilation technology provide complete systems solutions combin-ing the many requirements of different types of windows. We supply a full range from energy efficient drive systems to natural ventilation and complete solutions for supplying and extracting air, also as certified SHEVs.
Safety technology
GEZE safety technology sets the standards where preven-tative fire protection, access control and anti-theft security in emergency exits are concerned. For each of these objec-tives GEZE offers tailored solutions, which combine the in-dividual safety requirements in one intelligent system and close doors and windows in case of danger in a coordinated manner.
Building systems
In GEZE’s Building Management System GEZE door, win-dow and safety products can be integrated in to the se-curity and control systems of the building. A central con-trol and visualisation system monitors various automation components in the building and offers security through many different networking capabilities.
Glass systems
GEZE glass systems stand for open and transparent interior design. They can either blend discreetly into the architec-ture of the building or stand out as an accentuated feature. GEZE offers a wide variety of technologies for functional, reliable and aesthetic sliding wall or sliding door systems providing security with lots of design scope.
Innovative system solutions
POTENTIAL APPLICATIONS OF GEZE PRODUCTS
G E Z E AU TO M AT I C D O O R S YS T E M S
Id.No. 143639 · Vers. EN 1710 · Subject to modification
G E Z E R E P R Ä S E N TA N T
GEZE GmbHP.O. Box 136371226 LeonbergGermany
GEZE GmbHReinhold-Vöster-Straße 21-2971229 LeonbergGermanyTelefon +49 7152 203 0Telefax +49 7152 203 310www.geze.com
GermanyGEZE GmbHNiederlassung Süd-WestBreitwiesenstraße 871229 LeonbergTel. +49 7152 203 594Fax +49 7152 203 438leonberg.de@geze.com
GEZE GmbHNiederlassung Süd-OstParkring 1785748 Garching bei MünchenTel. +49 7152 203 6440Fax +49 7152 203 77050muenchen.de@geze.com
GEZE GmbHNiederlassung OstAlbert-Einstein-Ring 514532 Kleinmachnow bei BerlinTel. +49 7152 203 6840Fax +49 7152 203 76849berlin.de@geze.com
GEZE GmbHNiederlassung Mitte/LuxemburgAdenauerallee 261440 Oberursel (b. Frankfurt)Tel. +49 7152 203 6888Fax +49 7152 203 6891frankfurt.de@geze.com
GEZE GmbHNiederlassung WestHeltorfer Straße 1240472 DüsseldorfTel. +49 7152 203 6770Fax +49 7152 203 76770duesseldorf.de@geze.com
GEZE GmbHNiederlassung NordAlbert-Schweitzer-Ring 24-26 (3. OG)22045 HamburgTel. +49 7152 203 6600Fax +49 7152 203 76608hamburg.de@geze.com
GEZE Service GmbH Niederlassung Süd-WestReinhold-Vöster-Straße 2571229 LeonbergTel. +49 1802 923392Fax +49 7152 9233 359service-leonberg.de@geze.com
GEZE Service GmbH Niederlassung SüdParkring 1785748 Garching bei MünchenTel. +49 1802 923392Fax +49 7152 9233 859service-muenchen.de@geze.com
GEZE Service GmbH Niederlassung MitteOberurseler Str. 6961440 OberurselTel. +49 1802 923392Fax +49 7152 9233 659service-oberursel.de@geze.com
GEZE Service GmbH Niederlassung WestHeltorfer Straße 1240472 DüsseldorfTel. +49 1802 923392Fax +49 7152 9233 559service-duesseldorf.de@geze.com
GEZE Service GmbH Niederlassung OstAlbert-Einstein-Ring 514532 Kleinmachnow bei BerlinTel. +49 1802 923392Fax +49 7152 9233 759service-berlin.de@geze.com
GEZE Service GmbHNiederlassung NordAlbert-Schweitzer-Ring 24-26 (3. OG)22045 HamburgTel. +49 1802 923392Fax +49 7152 9233 459service-hamburg.de@geze.com
AustriaGEZE AustriaWiener Bundesstrasse 85A-5300 HallwangTel: +43 6225 87180Fax: +43 6225 87180 299austria.at@geze.com
Baltic States – Lithuania / Latvia / EstoniaTel. +371 678960 35baltic-states@geze.com
BeneluxGEZE Benelux B.V.Industrieterrein KapelbeemdSteenoven 36 5626 DK EindhovenTel. +31 4026290 80Fax +31 4026290 85benelux.nl@geze.com
BulgariaGEZE Bulgaria - Trade Representative OfficeNickolay Haitov 34 str., fl. 11172 SofiaTel. +359 247043 73 Fax +359 247062 62office-bulgaria@geze.com
ItalyGEZE Italia S.r.lSede di VimercateVia Fiorbellina 20 20871 Vimercate (MB) Tel. +39 0399530401 Fax+39 039 9530459/419italia.it@geze.com
Sede di RomaVia Lucrezia Romana, 9100178 RomaTel. +39 039 9530401Fax +39 039 9530449italia.it@geze.com
PolandGEZE Polska Sp. z o.o.ul. Marywilska 24 03-228 WarszawaTel. +48 224 404 440Fax +48 224 404 400geze.pl@geze.com
RomaniaGEZE Romania S.R.L.IRIDE Business Park,Str. Dimitrie Pompeiu nr. 9-9a,Building 10, Level 2, Sector 2,020335 BucharestTel.: +40 212507 750Fax: +40 316201 258office-romania@geze.com
RussiaOOO GEZE RUSLetnikovskaya str. 10/2Floor 6, room VII115114 MoscowTel: +7 495 741 40 61office-russia@geze.com
Scandinavia – SwedenGEZE Scandinavia ABMallslingan 10Box 706018711 Täby, SwedenTel. +46 87323 400Fax +46 87323 499sverige.se@geze.com
Scandinavia – NorwayGEZE Scandinavia AB avd. NorgeIndustriveien 34 B2073 DalTel. +47 63957 200Fax +47 63957 173norge.se@geze.com
Scandinavia – DenmarkGEZE DanmarkBranch office of GEZE Scandinavia AB Mårkærvej 13 J-K2630 TaastrupTel. +45 463233 24Fax +45 463233 26danmark.se@geze.com
SingaporeGEZE (Asia Pacific) Pte. Ltd.21 Bukit Batok Crescent #23-75 Wcega TowerSingapore 658065Tel: +65 6846 1338Fax: +65 6846 9353gezesea@geze.com.sg
South AfricaGeze South Africa (Pty) Ltd.GEZE, Building 3, 1019 Morkels CloseMidrand 1685Tel: + 87 94337 88Fax: + 86 66137 52info@gezesa.co.za
SwitzerlandGEZE Schweiz AGZelglimatte 1A6260 ReidenTel. +41 62 28554 00Fax +41 62 28554 01schweiz.ch@geze.com
TurkeyGEZE Kapı ve Pencere SistemleriSan. ve Tic. Ltd. Sti.İstanbul Anadolu Yakası OrganızeSanayı BolgesiGazi Bulvari Caddesi 8.Sokak No:8 Tuzla-IstanbulTel. + 90 216 45543 15Fax + 90 216 45582 15office-turkey@geze.com
UkraineLLC GEZE Ukraine17 Viskozna street,Building 93-B, Office 1202660 KyivTel./Fax +38 445012225office-ukraine@geze.com
United Arab Emirates/GCCGEZE Middle EastP.O. Box 17903Jebel Ali Free Zone DubaiTel. +971 48833 112Fax +971 48833 240gezeme@geze.com
United KingdomGEZE UK Ltd.Blenheim WayFradley ParkLichfieldStaffordshire WS13 8SYTel. +44 15434430 00Fax +44 15434430 01info.uk@geze.com
ChinaGEZE Industries (Tianjin) Co., Ltd.Shuangchenzhong RoadBeichen Economic DevelopmentArea (BEDA)Tianjin 300400, P.R. ChinaTel. +86 22 26973995Fax +86 22 26972702chinasales@geze.com.cn
GEZE Industries (Tianjin) Co., Ltd.Branch Office ShanghaiJia Little Exhibition CenterRoom C 2-102Shenzhuan Rd. 6000201619 Shanghai, P.R. ChinaTel. +86 21 52340960Fax +86 21 64472007chinasales@geze.com.cn
GEZE Industries (Tianjin) Co., Ltd.Branch Office GuangzhouRoom 17 C 3Everbright Bank Building, No.689Tian He Bei Road510630 Guangzhou, P.R. ChinaTel. +86 20 38731842Fax +86 20 38731834chinasales@geze.com.cn
GEZE Industries (Tianjin) Co., LtdBranch Office BeijingRoom 04-05, 7th Floor Red Sandalwood Plaza No. 27 Jianguo Road Chaoyang District 100024 Beijing, P.R.China Tel. +86 10 85756009Fax +86 10 85758079chinasales@geze.com.cn
FranceGEZE France S.A.R.L.ZAC de l’Orme RondRN 1977170 ServonTel. +33 1 606260 70Fax +33 1 606260 71france.fr@geze.com
HungaryGEZE Hungary Kft.Hungary-2051 BiatorbágyVendel ParkHuber u. 1.Tel. +36 23532 735Fax +36 23532 738office-hungary@geze.com
IberiaGEZE Iberia S.R.L.C/ Andorra 2408830 Sant Boi de Llobregat (Barcelona)Tel. +34 902194 036Fax +34 902194 035info@geze.es
IndiaGEZE India Private Ltd.MF 2 & 3, Guindy Industrial EstateEkkattuthangalChennai 600 097TamilnaduTel. +91 44 406169 00Fax +91 44 406169 01office-india@geze.com
top related