gradient csec geography

RM ACCOUNTS ED ram@2011 reserved

GRADIENT

How to calculate the gradient using a topological map

RM ACCOUNTS ED ram@2011 reserved

Formula to be applied

• Gradient is an expression of the change in elevation over the distance covered along the surface.

• Gradient =

• Express gradient in the format VD:HD

Vertical difference (in height)

Horizontal distance (on the ground)

RM ACCOUNTS ED ram@2011 reserved

example

Calculate the gradient of the road from the bridge at Cocoa Estate to the junction near the radio mast on the coast. (adapted from CSEC 2012 Geography CXC May/June – Qn 1(v))

RM ACCOUNTS ED ram@2011 reserved

Dominica (Lesser Antilles)

Examine the contour lines that pass through each point for the heights; and use the scale to ascertain the distance

RM ACCOUNTS ED ram@2011 reserved

Steps to take

• Identify the heights of the two locations

• Measure the distance in a straight line between the two points.

• OR if specified, along the route identified (e.g the road, or river, etc)

• Ensure that both the height and the distance have been expressed in the same units (i.e metres or feet)

RM ACCOUNTS ED ram@2011 reserved

What do we now know?

• The height of the bridge is 65 metres• The height of the junction is 5 metres

• The measurement of the distance between the bridge and the junction is 3000 metres

RM ACCOUNTS ED ram@2011 reserved

Applying the formula

•

• therefore the gradient VD:HD (60: 3000) is 1: 50

Vertical difference (in height)Horizontal distance (on the ground)

65 - 53000

RM ACCOUNTS ED ram@2011 reserved

sketched

For every fifty metres (in distance) you advanced from the bridge towards the junction you would have descended one metre (in height)