gripple electrical solutions ii
Post on 25-Jul-2016
299 Views
Preview:
DESCRIPTION
TRANSCRIPT
- Aesthetically pleasing
- Easy and efficient installation
- Complete off-site solutions
Electrical SolutionsComplete suspension systems for
a variety of electrical services
The Gripple® range of supports and hangers for electrical applicationshas been developed to provide a fast and versatile solution forsuspending all types of electrical containment.
Gripple products are designed to save time, labour and reduce costs by making the installation quicker and easier. Supplied in ready-to-use kits, the products in this range are lightweight, require no on-site cutting and reduce the time spent at height, offering enormous health and safety benefi ts for your project.
TrapezePage 4
C-ClipPage 10
Gripple suspension kits provide completesolutions for electrical installations
Products shown are for internal use only. Images shown for illustrative purposes only.Please refer to product installation instructions for full information.
Standard HangerPage 7
Scan to explore the electrical
application online
Trapeze PlusTrapeze Plus FR
Page 5-6
ExpressPage 8
G-BracketPage12
Y-FitPage 11
Catenary KitPage 10
4 5www.gripple.com www.gripple.com
All hangers are supplied as ready-to-use kits with a length of wire rope and end fi xing of your choice. All hangers are supplied as ready-to-use kits with a length of wire rope and end fi xing of your choice.
Ideal for fast suspension of brackets or channel for tray,trunking and basket.
• Tapered design - accommodates all slots sizes
• Discreet - fi ts completely inside the channel
• Pre-fi ts onto channel to ease working at height
• Aesthetic design
• Available as an accessory for multi-tiered installations
• Sizes available; No.2 45 kg, No.3 90 kg and No.4 225 kg with a 5:1 safety factor
• Also available in black (see page 15)
End Fixings - Page 13
A wide selection of end fi xingoptions to suit your application
Accessories - Page 14
Additional products designed tohelp with your installation
Installation System Design Service
Submit your drawings and our technical team will provide bespoke product specifi cation
based on your project requirements
Sales Enquiries
Call our friendly team on
+44 (0) 800 018 4264
Trapeze (TZ)
“Gripple kits not only complement the architecture of abuilding but are also installed quickly and effi ciently”
Contracts Engineer - Weavers Triangle
The all-steel Trapeze Plus is packed with features to make channel suspension even more secure and durable.
• Reduced time working at height: pre-install into channel using the washer/nut supplied• Tool free setting• Easy-to-use integral release button to allow fi nite adjustment• Tighten the locking screw for ultimate security• Channel can be multi-tiered to optimise space• Full range of end fi xings available• Sizes available; No.2 45 kg, No.3 90 kg and No.4 225 kg with a 3:1 safety factor
Trapeze Plus (MTZ)
“Less material on site and fewer deliveries reduces theCO2 and helps the BREEAM rating”
Project Engineer, Kershaws - Flitwick Leisure Centre
6 7www.gripple.com www.gripple.com
All hangers are supplied as ready-to-use kits with a length of wire rope and end fi xing of your choice. All hangers are supplied as ready-to-use kits with a length of wire rope and end fi xing of your choice.
End Fixings - Page 13
A wide selection of end fi xingoptions to suit your application
Accessories - Page 14
Additional products designed tohelp with your installation
Installation System Design Service
Submit your drawings and our technical team will provide bespoke product specifi cation
based on your project requirements
Sales Enquiries
Call our friendly team on
+44 (0) 800 018 4264
The Standard Hanger presents an ideal solution to fulfi l a variety of electrical suspension requirements.
Standard Hanger (HF)
“The Gripple system is excellent in terms ofcleanliness, time saving and safety”
Site Manager - Kershaw, Woodpecker Hall Primary School
The all-steel Trapeze Plus FR is supplied with stainless steel wire for the suspension of services where fi re resistance is required.
• Reduced time working at height: pre-install into channel using the washer/nut supplied• Fire Rated: BRE Certifi ed up to F120 in accordance with BS476• Part 20 / DIN4102 Part 2. Certifi cation available with load limits and exposure times• Tool free setting: Easy-to-use integral adjustment button• Tighten the locking screw for ultimate security• Channel can be multi-tiered to optimise space• Stud, Eyelet, 90° Eyelet end fi xings available• Supplied with Stainless Steel wire• No.3 90 kg with a 3:1 safety factor
Trapeze Plus FR (MTZFR)
“We have found Gripple to be quick and easy to assemble all manner of M&E services. It has proven to be strong, reliable, versatile and aesthetically pleasing”
Site Manager, Willmott Dixon
• Up to 6 times faster to install than traditional suspension systems
• Versatile
• Simple to use
• Adjustable using key (provided with kits)
• Strong, safe and industry approved
• Load ratings up to 325 kg with a 5:1 safety factor
• Also available in black (see page 15)
8 9www.gripple.com www.gripple.com
All hangers are supplied as ready-to-use kits with a length of wire rope and end fi xing of your choice.
End Fixings - Page 13
A wide selection of end fi xingoptions to suit your application
Accessories - Page 14
Additional products designed tohelp with your installation
Installation System Design Service
Submit your drawings and our technical team will provide bespoke product specifi cation
based on your project requirements
Sales Enquiries
Call our friendly team on
+44 (0) 800 018 4264
Angel (AL)Our latest innovation, designed for architectural lighting suspensions where aesthetics are important.
• Simple one-handed operation for easy adjustment
• Contemporary design to complement the overall suspension
• Extensive range for use with most luminaires
• Suitable for loads up to 15 kg with a 5:1 safety factor, to accommodate a range of suspension requirements
• Supplied in convenient, ready-to-use kits in lengths up to 10 metres as standard
• Uses 1.5 mm wire rope to make the suspension as discreet as possible
• As standard, all kits come complete with the aesthetic ‘Top Hat Barrel’ ceiling fi xing with M6 thread. Other ceiling fi xings, e.g. Loops, Studs, Magnetic Pads are available on request
The latest innovationfrom Gripple
The Express No. 2 offers an instant locking system to make adjustment even easier.
• The system incorporates an integral adjustment mechanism for convenience
• Up to 6 times faster to install than traditional methods
• Keyless operation
• Discreet and aesthetic design
• Express No. 2 load rated at 45 kg with a 5:1 safety factor
• Also available in black (see page 15)
Express (XP)
“Gripple kits helped us to complete the job on time,whilst also reducing our embodied carbon”
Site Supervisor, Gateway Primary Free School
10 11www.gripple.com www.gripple.com
All hangers are supplied as ready-to-use kits with a length of wire rope and end fi xing of your choice. All hangers are supplied as ready-to-use kits with a length of wire rope and end fi xing of your choice.
End Fixings - Page 13
A wide selection of end fi xingoptions to suit your application
Accessories - Page 14
Additional products designed tohelp with your installation
Installation System Design Service
Submit your drawings and our technical team will provide bespoke product specifi cation
based on your project requirements
Sales Enquiries
Call our friendly team on
+44 (0) 800 018 4264
“Gripple Catenary kits were quick to install andoffer improved aesthetics”
Site Supervisor, B&Q, Bedford
Create secure, overhead spans by running high strength wire rope between two fi xing points. Ideal for applications where no direct vertical anchor point is available. The Gripple C-Clip, an innovative twist-on/off device, allows you to suspend your light from anywhere along the span.
• Visually discreet and lightweight
• Can be fi tted retrospectively
• No tools needed to install
• Available in 3 mm and 6 mm wire rope diameters, for suspensions up to 100 kg per span
• C-Clip allows horizontal and vertical adjustment
• Cams lock solidly in place, even at angles up to 60°
Catenary Kit and C-Clip
“Ideal for use with a Gripple Catenary Kit”
Contractor, Tesco, Leeds
Single hanger with dual suspension points, which improves stability and centre of gravity.
• Y-Fit is a one piece suspension, ideal for shorter drop lengths
• Y-Fit Accessory is designed for use with a Standard Hanger or Express Hanger kit, for longer drops and increased adjustment
• Ideal for suspending cable basket and tray without the need for channel
• Available with a range of end fi xings, and leg lengths to suit your specifi cation
Y-Fit and Y-Fit Accessory
12 13www.gripple.com www.gripple.com
Bespoke hanger for cable tray and basket,allowing easy loading and unloading of cables.
• For use with a Y-fi t or Y-fi t Accessory with a Snap Hook end fi xing
• Cut from heavy gauge steel
• Requires only one hole to be drilled for the entire installation
• Creates a well-balanced and secure hanger
• Can be joined together by stacking, or positioning side by side, and securing with coupling bolts
G-Bracket
End Fixings - Page 13
A wide selection of end fi xingoptions to suit your application
Accessories - Page 14
Additional products designed tohelp with your installation
“Very easy to install”
Contractor, Tesco, Leeds
QT End Fixing (Coming Soon)• Quick and easy quarter turn attachment• Designed to work with pre-cut Gripple Pipe Brackets and Low Profi le Pipe Brackets• Comes as a ready-to-use kit with wire and Hanger
Installation
All Gripple hanger kits are supplied with pre-crimped end fi xings and yourchoice of wire rope length, suitable for installation into any substrate.
Installation
Loop• Ideal for looping around purlins, beams, roof trusses and other suitable building features• Available up to 325 kg SWL, with a 5:1 safety factor• Available in Stainless Steel
Snap Hook• Quick and easy attachment to cable basket, purlin clips, light fi ttings• Available in Gripple sizes No.2 and No.3 up to 90 kg SWL, with a 5:1 safety factor• Available in Stainless Steel
Installation
Stud• Ideal for anchoring into concrete ceilings and Channel Nuts• Supplied with a Drop-in Anchor• Available up to 225 kg SWL, with a 5:1 safety factor• Available in Stainless Steel
Installation
End Fixings
Other end fi xings are available. Contact our technical team for details.
90° Eyelet• Ideal for fi xing into concrete, steel or wood using gas or powder activated tools or appropriate screws• Available in Gripple sizes No.1, No.2 and No.3 up to 90 kg rated at 5:1 SWL
Installation
25 mm Wedge• Ideal for fi xing into the re-entrant channel of several composite fl oor deckings (R51, CF51, Holorib, MD50 and MF55)• Available up to 90 kg SWL, with a 3:1 safety factor• Comes as a ready-to-use kit with wire and Hanger
Installation
Channel Nut• Designed for fi xing directly into Channel• Available in Gripple sizes No.2 and No.3• Comes as a ready-to-use kit with wire and Hanger
Installation
14 15www.gripple.com www.gripple.com
Standard product codes for Gripple hangers:
1) Choose your kit type: (Input the code in the red area below)
2) Choose your end fi xing: (Input the code in the green area below)
3) Choose your wire length: (Input the code in the blue area below) Bespoke lengths are available upon request.
4) Enter your unique product code:
Example code: HF2-HG-2M (Standard Hanger Kit for 2 mm wire and 2 metres of wire)For Black fi nished products add “BLK” to the end of the product code.
For 3 mm Catenary kits use CTI-3MM-XXM, where “XX” is the required length. For 6 mm Catenary kits useCTI-6MM-XXM, where “XX” is the required length.
Both our 3 mm C-Clip and 6 mm C-Clip can be ordered as an end fi xing, using CC3 and CC6 alongside a choice of kit respectively.
Other hangers, end fi xings and wire lengths (in multiples of 1m) are available, please call +44 (0) 800 0184 264 or visit ourwebsite www.gripple.com for further details.
Stud M10 x 45 mm
S10GM8 x 45 mm
S8G
Loop
LGSnap Hook
SH6GEyelet
EY6GEyelet 90°
EY690G
1M 2M 3M 5M 10M
Product Codes
Standard Hanger No.1
HF1
Express No.2
XP2
TrapezeNo. 2
TZ2
TrapezeNo. 3
TZ3
Trapeze PlusNo. 2
MTZ2
Trapeze PlusNo. 3
MTZ3
Standard Hanger No.2
HF2
Trapeze PlusNo. 4
MTZ4
Section 1 Section 2 Section 3
- -
25 mm Wedge
DW258G
A variety of accessories are available increasing versatility and easeof installation.
Accessories
Gripple’s ready-to-use suspension kits now come with the option of a black fi nish to further enhance the aesthetic appeal of the range.
The slim and unobtrusive aesthetics of Gripple’s wire suspension system have always proved perfectly suited to the design of many modern buildings where building services in the roof space are left exposed and visible.
Black Line
Cable Basket AdapterDesigned for use with the Trapeze No.2 to suspend cable baskets up to 6 mm wire diameter. Ideal for quick and easy installation of multi-tiered cable baskets.
Product code: TZ2-ADP-CB6
Tensioning ToolFor use with 6 mm Catenary Kits. Tensions wire easily(up to 100 kg).
Product code: CTI-6MM-TOOL
Wire CuttersPurpose made for 4 mm wire. For use when terminating wire lengths.
Product code: CUTTER-GRIPPLE
Thru-In-1®
Patented SDS+ drill bit and sleeve technology that simplifi es the passing of cable or piping through cavity walls. Available in 22 mm and 28 mm starter packs.
Product code: TI1-22-STARTER
TI1-28-STARTER
GF BracketIdeal for clamping onto an I-Beam when it is not possible to loop around with catenary wire, or when the height of the bean is too great.
Product code: I-beam 6/13 mm: GF12-EYENUTI-beam 8/16 mm: GF16-EYENUT-12I-beam 10/19 mm: GF20-EYENUT-12
Beam & Purlin ClipsAvailable in a variety of sizes and models for attachment to beams and purlins. Contact us for sizing and product code options.
Spring ClipThe Spring clip is ideal for fi xing to suspended services with 6 mm to 8 mm holes.
Product code:CLIP-SPG-68
TwisterAesthetic fi nish keeps tail wires neat and tidy. For use with2 mm / 3 mm wire.
Product code: TWIST-10BB
Trapeze No. 2, 3 & 4Combine Trapeze as an accessory with any Trapeze kit for multi-tiered installations.
Product code: TRAPEZE-NO2TRAPEZE-NO3TRAPEZE-NO4
Trapeze Plus No. 2, 3 & 4Combine Trapeze Plus as an accessory with any Trapeze kit for multi-tiered installations. Load rating of 45-225 kg with a 3:1 safety factor.
Product code:GRIPPLE2MM-TPZ-METALGRIPPLE3MM-TPZ-METALGRIPPLE4MM-TPZ-METAL
QT End Fixing
Coming Soon2016
Channel Nut
CN8G
BUS-BROC-MEP-GEN-ENG-ES15
www.gripple.cominfo@gripple.com
Gripple Ltd (Headquarters)
The Old West Gun WorksSavile Street EastSheffield S4 7UQUK
T | +44 (0) 800 018 4264 F | +44 (0)114 275 1155 E | info@gripple.com
Gripple Inc
1611 Emily Lane Aurora IL 60502 USA
T | +1 866 474 7753 F | +1 800 654 0689 E | usinfo@gripple.com
Gripple Europe SARL
1, rue du commerce BP 37 67211 Obernai Cedex France
T | +33 (0)3 88 95 44 95 F | +33 (0)3 88 95 08 78 E | frinfo@gripple.com
Gripple India
B 95/2 Naraina Industrial Area Phase I New Delhi-110028
T | +91 11-40582703 F | +91 11-40582703 E | ininfo@gripple.com
WE ARE SOCIAL FOLLOW OUR UPDATES
© 2015 GrippleGripple is a registered trademark of Gripple Limited.
Company registered in England No. 1772901, VAT Reg No. GB 600 1951 88
top related