guard industry self cleaning pollution removing products
Post on 04-Apr-2016
216 Views
Preview:
DESCRIPTION
TRANSCRIPT
surface PreParation •Applytheproducttoasurfacethatisclean,dust-free,grease-free and dry. To remove stains and marks ofpollution use Guard Cleaner Eco® Polluted Facades,whileforefflorescence,laitanceorconcretebloomuseGuardRemoverEco®Efflorescence&Cement.
aPPlication tools
aPPlication •Useproductneat-donotdilute.• Shakecontainerwellbeforeuse.Testfirst.• Thesurfacemustbeimpregnatedfromthebottomupuntilsaturation inasingle layeror intwolayers«wetonwet».
•Avoid applying too thickly.Remove any excess beforeitdries.
• Protectfor24hoursuntildry.•Optimalperformanceisachievedafter7days.
coverage •Approximately4to7m²/litre.
surface PreParation •Applytheproducttoasurfacethatisclean,dust-free,grease-free and dry. To remove stains and marks ofpollution use Guard Cleaner Eco® Polluted Facades,whileforefflorescence,laitanceorconcretebloomuseGuardRemoverEco®Efflorescence&Cement.
• The conditionsof application and surface preparationmust satisfy French unified code of building practiceDTU59.1.
aPPlication tools
coverage •Approximately6to10m²/litre.
aPPlication •Useproductneat-donotdilute.• Shake container well before use to ensure thoroughmixingofthepigmentswiththerestofthecomposition.
• Testfirst.
ApplicationusingHVLPspray:•Workingfromthethebottomup,applynotmorethan2to4mutuallyperpendicularlayersdependingonthedesiredappearance.
•Donotapplytoothickly.•Dryingtimebetweenlayers:15minutes.
Applicationwithbrushandroller:•Working from the bottom up, apply 2 or 3 coats bybrush,spreadingtheproductsothatitisnottoothick.
• If brush marks are visible, smooth with short-hairedroller.
•Dryingtimebetweencoats:30minutes.• Protectfor24hoursuntildry.•Optimalperformanceisachievedafter7days.
Prot
ectG
uard
® C
olor
est
une
mar
que
dépo
sée
de G
uard
Indu
strie
- D
ocum
ent e
t pho
tos
non
cont
ract
uels.
01/
2013
.
Guard Industry attaches great importance to developing, promoting and distributing green technologies. The constant concern of the company is to be good for building materials and good for the environment too.
GUARDINDUSTRYUKLTDUnit2a,SpringHillIndustrialEstate,ColliersWay-Arley–CoventryCV78HN–UKTel:+44(0)1676541324–E-mail:contactus@guardindustry.com
GUARDINDUSTRIE7,rueGutenberg-93108MontreuilCedex–FranceTél:33(0)155861760–Fax:33(0)148581689E-mail:info@guardindustrie.com
GUARDINDUSTRIEITALIAViadelLavoro10,VillafrancadiVerona-37069–ItalieTel:+390456303611–Fax:+390457979032–E-mail:info@guardindustrieitalia.it
GUARDINDUSTRIEVOSTOK90,NaberezhnayarekiMoyki-190000Saint-Pétersbourg–RussieTel:+7(812)9380635–+7(812)9560637–Fax:+7(812)7027342–E-mail:guardindustrie@mail.ru
GUARDBAOTEJIATECHNOLOGYCO.,LTDB535F5,CBDInternational-Towern°16,Yongandongli-Chaoyangdistrict-Pékin–ChineTel:008601065637702–E-mail:info@guardindustry-asia.com
www.guardindustrie.com
TAKEC
AREO
FMATERIA
LS
Prot
ectG
uard
® D
tox
et P
rote
ctG
uard
® C
olor
Dto
x so
nt d
es m
arqu
es d
épos
ées
de G
uard
Indu
strie
- D
ocum
ent e
t visu
els
non
cont
ract
uels.
09/
2013
.
TAKEC
AREO
FMATERIA
LS
self-cleaning Pollution-reMoving Products
WATER-ANDOIL-RESISTANTREMOVESPOLLUTANTSFROMOUTDOORAIRSELF-CLEANINGSURFACES
Product aPPlication
WitH dtoX Products, surfaces staY clean and tHe air is Purified!
GuardIndustryisaFrenchcompanythatspecialisesinresearching,makinganddevelopingproductsthatprotect,decorate,clean,maintainandpreservebuildingmaterials.
Ourcompanydevelopsproductsfortacklingdamp,dirt,pollution,graffitiandmore,andthatadapttoallkindsofbuildingmaterials,suchasnaturalstone,concrete,brick,wood,etc.
Eversinceitwasfounded,GuardIndustryhasbeencommittedtomanufacturinginnovative,high-qualityproductsbyinvestingheavilyandcontinuallyinresearchanddevelopment.
Consciousoftoday’senvironmentalchallenges,ourcompanydesignsproductstorigorousspecificationsoutofrespectformanandtheplanet.
Tocombatthescourgeofatmosphericpollution,GuardIndustryistodayturningtophotocatalytictechnologytocleanupourenvironmentwhilepreservingourbuildingmaterials.
figHting atMosPHeric Pollution
Everyday approximately15,000 litresof air enterour lungs.This air is heavilypollutedbyroadtransport, industrialactivityandagriculture.AccordingtotheWorld Meteorological Organization, the European Commission and France’sMinistry of Sustainable Development, this atmospheric pollution causes onaverageeachyeartheprematuredeathsof2.3millionpeopleworldwide,400,000inEuropeand40,000 inFrance.Airqualityhasbecomeamajorenvironmentalconcern.
Pollutioncausesserioushealthproblemsaswellasdarkeningourbuildingswithunsightly smearsandgrime. Inaddition,maintenanceandresurfacingarecostlyandgenerate theirownpollution (largeamountsofwater,energyandsolvent-containingdetergentsareused).
clean uP environMent WHile Preserving building Materials
GuardIndustrynowofferstheinnovativesolutiontotheseproblems:DTOXproductswhichcombinewater-repellent,oil-repellent,anti-graffitiandpollution-removingproperties.DTOXproductscanbeappliedoutdoorsonallporousmaterials(stone,concrete,brick,rendering,etc.).Theycanbeusedonnewworkandinrenovation.DTOXproductsareavailableintwoversions:ProtectGuardDTOXhasatotallyinvisiblefinish,whileProtectGuardColorDTOXisacolouredlasurewhich,inadditiontoprovidingcompleteprotection,offersthepossibilityofcolouringthematerialbysurfaceimpregnation.
Protectionagainstwater,dirtandgreaseRemovalofpollutionfromoutsideairSelf-cleaningsurfacesColourless,invisiblefinishNon-film-forming
Protectionagainstwater,dirtandgreaseRemovalofpollutionfromoutsideairSelf-cleaningsurfacesColouredfinish(50shades)Non-film-forming
Outside Inside
Pollution molecules broken down
H2O and CO2 form
ProtectGuard® DTOXTreatment
Photocatalytic removal of pollution
DTOX products use photocatalytic action to removepollutantspresentinoutdoorairandbreakdownorganicpollution.They contain titanium dioxide (TiO2) which acts as acatalyst.Under the actionofUV light, titaniumdioxideisactivated.Itbreaksdownmostpollutantsandorganiccontaminationwhichcausesgrimeonbuildings:industrialpollution, exhaust fumes, moss, algae, mould, oils andgreases,etc.Theseorganicpollutantsarethenconvertedintowatervapourandcarbondioxide.
from the properties of tio2, and from internationally conducted laboratory tests, the evidence suggests that the following breakdown percentages can be achieved: 95% of noX, 85% of vocs, 90% of traditional pollutants (acetone, acetaldehyde, toluene, heptane).
Outside Inside
Beading e�ect
Water and oil repellent protection
ProtectGuard® DTOXTreatment
DTOXproductsofferlong-lastingprotectionagainstwa-ter,dirt,grease,graffitiandpollution.Theylimitthehar-mfuleffectsofmoisture(erosion,efflorescenceorsurfacesalts,growthofmicro-organisms,frostdamageetc.)andslowthebuild-upofgrimeonmaterials.
Self-cleaning surfaces
Extérieur Inside
Dirt left on the surface is washed away by the rain
ProtectGuard® DTOXTreatment
Outside
Thanks to the product’s water- and oil-repellentproperties,dirtcannotclingtothesurfaceandiswashedoffbytherain.Surfacesthusbecomeself-cleaning.
PHotocatalYsis, a 100% natural Process
Photocatalysis is a totally natural process inwhich a substance, the photocatalyst, initiatesa chemical reactionwhen exposed to light. Thecatalystbreaksmatterdownundertheactionoflightradiation.This process resembles plant photocatalysis, inwhich chlorophyll captures sunlight to convertwaterandcarbondioxideintooxygenandglucose.Photocatalysisthereforeacceleratestheoxidationprocess, causing pollutants to be broken downmorerapidly.
tHe dtoX range: innovative 3-in-1 Products
top related